Assessment of seasonal variations in persistent organic pollutants across the region of Tuscany using passive air samplers

The effect of military conflict zone in the Middle East on atmospheric persistent organic pollutant contamination in its north

This study aimed to investigate long-range atmospheric transport of selected POPs released due to the effects of military conflicts in regions to the south of Turkey's borders. Ten locations were selected to deploy passive air samplers at varying distances to the border on a southeast-west transect of the country, proximity-grouped as close, middle, and far. Sampling campaign included winter and transition months when desert dust transport events occur. Hypothesis of the study was that a decreasing trend would be observed with increasing distance to the border. Group comparisons based on statistical testing showed that PBDE-183, Σ₄₅PCB, and dieldrin in winter; PBDE-28, PBDE-99, PBDE-154, p,p'-DDE, Σ₁₄PBDE, and Σ₂₅OCP in the transition period; and PBDE-28, PBDE-85, PBDE-99, PBDE-154, PBDE-190, PCB-52, Σ₄₅PCB, p,p'-DDE, and Σ₂₅OCP over the whole campaign had a decreasing trend on the transect. An analysis of concentration ratio to the background showed that long-range atmospheric transport impacted the study sites, especially those of close group in comparison to the local sources. Back-trajectory analyses indicated that there was transport from the conflict areas to sites in the close-proximity group, while farther sampling locations mostly received air masses from Europe, Russia, and former Soviet Union countries, followed by North Africa, rather than the military conflict areas. In consequence, decrease in concentrations with distance and its relation to molecular weight through proportions, diagnostic ratios, analysis of concentration ratio to the background, and back-trajectory analyses support the effect of transport from the military-conflict area to its north.

Preliminary results from the Tunisian monitoring program on POPs in air under the Stockholm Convention

Persistent organic pollutants (POPs) have been measured using passive air samplers (PASs) over two years (2017-2018) in the city of Tunis within the framework of the UNEP/GEF GMP2 projects to support Stockholm Convention implementation. Several POPs, although banned for a long time from Tunisia, were registered in relatively high amounts in the atmospheric compartment. The most unexpected compound is hexachlorobenzene (HCB), with concentrations ranging from 5.2 ng/PUF to 16 ng/PUF. Furthermore, the current results seem to confirm the presence of dichlorodiphenyltrichloroethane (DDT) and its transformation products and hexachlorocyclohexanes (HCHs) at relatively high concentrations (4.6 ng/PUF to 9.4 ng/PUF and 2.7 ng/PUF to 5.1 ng/PUF, respectively), followed by hexabromocyclododecane (HCBD), which varies from 1.5 ng/PUF to 7.7 ng/PUF. Nondioxin-like PCB (ndl-PCB) concentrations in Tunis were very high (62.0 ng/PUF to 419.3 ng/PUF), higher than those in other African countries participating in this project. Uncontrolled combustion seems to be one of the most important sources of the emanation of dioxin compounds dl-PCBs and Polychlorinated dibenzodioxins PCDD/polychlorinated dibenzofurans PCDF. Toxic equivalents (TEQs) ranged from 4.1 pg WHO-TEQ/PUF to 6.4 pg WHO-TEQ/PUF. The perfluorinated compounds (PFAS) and congeners of polybrominated diphenyl ethers (PBDEs) show relatively low amounts that remain below the African continent average. The PFAS pattern suggests a local source rather than long-range transport. These results constitute the first exhaustive work capable of providing an overview of the levels of POPs in the air in Tunis. As a result, it will be possible to set up an adequate monitoring program with specific investigations and experimental studies.

Atmospheric PAHs in rural, urban, industrial and beach locations in Buenos Aires Province, Argentina: sources and health risk assessment

The first atmospheric PAHs levels and associated inhalation cancer risk were assessed over southwest Buenos Aires region by deploying PUF disk PAS samplers. Eight sampling location included coastal zones, touristic beaches, and rural inland areas were considered. PUF disks were fortified with surrogate standards and extracted by automated Soxhlet prior to GC-MS analysis. Σ₁₆ PAHs ranged from 1.13 to 44.5 ng m^-3 (10.3 ± 9.8), while urban locations showed up to 10 times higher PAH levels than rural or beach locations. Direct sources of PAHs, such as intensive vehicle traffic, heating, and general combustion activities, were identified. PAHs with four to six rings (46.62%) were predominantly Flt, Pyr, BbF, and BkF, and carcinogenic risk was expressed by BaP (0.10 ± 0.07 ng m^-3) and BaPTEQs (0.26 ± 0.22 ng m^-3). Inhalation ECR (2.23E-5, WHO) presented the lowest risk at beach locations. Molecular ratios and PCA showed a strong dominance in pyrolytic sources, such as biomass and coal combustion, with a particular signature in fires at inland locations. Overall, this study demonstrated that PUF disk passive air sampling provided a sound and simple approach for tracking air PAHs, their sources and public health risks, bringing a cost-effective tool for pollution control measures, even at small and remote towns. This is particularly relevant in extensive countries with medium or low income, such as Argentina.

Atmospheric concentration, spatial variations, and source identification of persistent organic pollutants in urban and semi-urban areas using passive air samplers in Bursa, Turkey

In this study, the concentration of ambient persistent organic pollutants (POPs) such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs) were measured for 12 months in urban and semi-urban areas using a passive air sampler. During the sampling period, a total of 14 PAH (∑₁₄PAH) concentrations measured in urban and semi-urban areas were found to be 54.4 ± 22.6 ng/m³ and 51.7 ± 34.3 ng/m³, respectively. Molecular diagnostic ratios (MDRs) were used to determine PAH sources. According to the MDR values, combustion sources were the most important PAH sources in both sampling areas. However, since the urban area is close to the industrial zone, the combustion sources occurred at high temperatures (> 800 °C), while the sources in the semi-urban area generally consisted of petrogenic fuel combustion. ∑₅₀PCB concentrations measured in the urban and semi-urban areas were found to be 522.5 ± 196.9 pg/m³ and 439.5 ± 166.6 pg/m³, respectively. Homologous group distributions were used to determine the source of PCBs. According to the homologous group distributions, tri-, tetra-, and penta-chlorinated PCBs were dominant in both sampling areas. ∑₁₀OCP concentrations measured in urban and semi-urban areas were found as 242.5 ± 104.6 pg/m³ and 275.9 ± 130.9 pg/m³, respectively. Also, α-HCH/γ-HCH and β-/(α + γ)-HCH ratios were used to determine the source of OCPs. Lindane was the predominant OCP in both sampling areas.

Seasonal variation and positive matrix factorization result reveal the sources of giant pandas' exposure to POPs

Persistent organic pollutant (POPs) contamination was analyzed in samples collected from wild and captive giant pandas to characterize seasonal variation in concentrations of POPs and possible sources. POP concentrations in bamboo and fecal samples collected from captive pandas showed significant fluctuations compared with those collected from wild pandas in each season. The highest polychlorinated biphenyl (PCB) and organochlorine pesticide (OCP) concentrations were 1380 pg g^-1 dw and 3140 pg g^-1 dw, respectively, which were observed in captive bamboo samples in the summer. PCBs varied seasonally, whereas OCPs did not show apparent seasonal variation. Based on the seasonal variability, component analysis, and the positive matrix factorization results, we determined that the secondary volatilization of POPs during periods of high temperatures was the leading cause of the exposure of pandas to pollutants (45%), and atmospheric transport played a crucial role in the secondary distribution of pollutants in panda food. The other two sources of pollution were historical residues transmitted over long distances to protected areas (28%), as well as UP-POPs and new inputs from agricultural activities (27%). The concentrations of pollutants in bamboo shoots were significantly lower than those in bamboo. Therefore, bamboo shoots should be incorporated into the diet of captive pandas in the spring to reduce their exposure to pollutants. The absorption capacity of pollutants associated with the consumption of bamboo shoots was significantly lower than that associated with the consumption of bamboo. The diet of young captive pandas in the summer should also be managed with caution given their slightly stronger ability to absorb pollutants.

Atmospheric Occurrence of Organochlorine Pesticides and Inhalation Cancer Risk in Urban Areas at Southeast Brazil

Organochlorine pesticides (OCPs) have been produced for almost a century and some of them are still used, even after they have been proved to be toxic, persistent, bioaccumulative and prone to long-range transport. Brazil has used and produced pesticides in industrial scales for both agricultural and public health purposes. Urban and industrial regions are of special concern due to their high population density and their increased exposure to chemical pollution, many times enhanced by chemical production, application or irregular dumping. Therefore, we aimed to investigate the occurrence of OCPs in outdoor air of urban sites from two major regions of southeast Brazil. Some of these sites have been affected by OCP production and their irregular dumping. Deterministic and probabilistic inhalation cancer risk (CR) assessments were conducted for the human populations exposed to OCPs in ambient air. Ambient air was mainly affected by Ʃ-HCH (median = 340 pg m^-3) and Ʃ-DDT (median = 233 pg m^-3), the only two OCPs registered for domissanitary purposes in Brazil. OCP concentrations tended to be higher in summer than in winter. Dumping sites resulted in the highest OCP atmospheric concentrations and, thus, in the highest CR estimations. Despite of all limitations, probabilistic simulations suggested that people living in the studied regions are exposed to an increased risk of hepatic cancer. Infants and toddlers (0 < 2 y) were exposed to the highest inhalation CRs compared to other age groups. Other exposure pathways (such as ingestion and dermic uptake) are needed for a more comprehensive risk assessment. Moreover, this study also highlights the need to review the human exposure to OCPs through inhalation and their respective CR in other impacted areas worldwide, especially where high levels of OCPs are still being measured.

Evaluation of risk levels of trace elements in walnuts from China and their influence factors: Planting area and cultivar

The potential health risk of trace elements in nut foods has been widely concerned. The accumulations of trace elements by plants in the environment are disturbed by multiple factors. The objective of this work was to investigate the risk levels of trace elements in walnuts and their influence factors (planting area and cultivar). A total of 228 walnut samples were collected from four major walnut producing areas of China. The contents of essential elements for Fe, Cu, Zn, Mo and Se were 35.8, 21.9, 14.8, 0.3 and 0.04 mg/kg, respectively. The contribution of Cu for dietary reference intake was as high as 82.22%. The risk levels of potential toxicological elements and toxic elements within the acceptable limits. Significantly, the hazard quotients (HQs) of Ba and Co were up to 26.14% and 25.31%, respectively. The effect of planting area on trace elements was determined from the aspects of regional distribution and urbanization. Significant differences of essential elements were found between northeast and northwest areas. The urbanization directly influenced toxic elements, which could cause variation up to 85.0% (Pb) and 42.9% (As). Finally, cultivar effect was confirmed that all walnut cultivars were divided into four categories with different trace element characteristics.

Passive air sampling for semi-volatile organic chemicals

During passive air sampling, the amount of a chemical taken up in a sorbent from the air without the help of a pump is quantified and converted into an air concentration. In an equilibrium sampler, this conversion requires a thermodynamic parameter, the equilibrium sorption coefficient between gas-phase and sorbent. In a kinetic sampler, a time-averaged air concentration is obtained using a sampling rate, which is a kinetic parameter. Design requirements for kinetic and equilibrium sampling conflict with each other. The volatility of semi-volatile organic compounds (SVOCs) varies over five orders of magnitude, which implies that passive air samplers are inevitably kinetic samplers for less volatile SVOCs and equilibrium samplers for more volatile SVOCs. Therefore, most currently used passive sampler designs for SVOCs are a compromise that requires the consideration of both a thermodynamic and a kinetic parameter. Their quantitative interpretation depends on assumptions that are rarely fulfilled, and on input parameters, that are often only known with high uncertainty. Kinetic passive air sampling for SVOCs is also challenging because their typically very low atmospheric concentrations necessitate relatively high sampling rates that can only be achieved without the use of diffusive barriers. This in turn renders sampling rates dependent on wind conditions and therefore highly variable. Despite the overall high uncertainty arising from these challenges, passive air samplers for SVOCs have valuable roles to play in recording (i) spatial concentration variability at scales ranging from a few centimeters to tens of thousands of kilometers, (ii) long-term trends, (iii) air contamination in remote and inaccessible locations and (iv) indoor inhalation exposure. Going forward, thermal desorption of sorbents may lower the detection limits for some SVOCs to an extent that the use of diffusive barriers in the kinetic sampling of SVOCs becomes feasible, which is a prerequisite to decreasing the uncertainty of sampling rates. If the thermally stable sorbent additionally has a high sorptive capacity, it may be possible to design true kinetic samplers for most SVOCs. In the meantime, the passive air sampling community would benefit from being more transparent by rigorously quantifying and explicitly reporting uncertainty.

Occurrence and sources of PCBs, PCNs, and HCB in the atmosphere at a regional background site in east China: Implications for combustion sources

Multiple types of persistent organic pollutants (POPs), such as polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and hexachlorobenzene (HCB), can be unintentionally released from combustion or thermal industrial processes, which are speculated to be the main sources of these contaminants, as they were banned on production and use since several decades ago. In this study, concentrations and sources of 40 PCBs, 39 PCNs, and HCB were analyzed in air samples collected during the period 2012-2015 at a background site in east China. ΣPCBs, ΣPCNs, and HCB were in the range of 9-341 pg/m³, 6-143 pg/m³, and 14-522 pg/m³, respectively. Seasonal characteristics with high levels in winter and low levels in summer were observed for PCNs and HCB. PCBs also exhibited slightly higher levels in winter. Source apportionment was conducted, using polycyclic aromatic hydrocarbons (PAHs) as combustion sources indicator, combined with principal component analysis (PCA) and positive matrix factorization (PMF) model. The results indicated that the legacy of past produced and used commercial PCBs was the dominant contributor (∼56%) to the selected PCBs in the atmosphere in east China. PCNs were mainly emitted from combustion sources (∼64%), whereas HCB almost entirely originated from combustion process (>90%).

Characterizing Spatial Diversity of Passive Sampling Sites for Measuring Levels and Trends of Semivolatile Organic Chemicals

Passive air sampling of semivolatile organic compounds (SVOCs) is a relatively inexpensive method that facilitates extensive campaigns with numerous sampling sites. An important question in the design of passive-sampling networks concerns the number and location of samplers. We investigate this question with the example of 17 SVOCs sampled at 14 background sites across the Czech Republic. More than 200 time series (length 5-11 years) were used to characterize SVOC levels and trends in air between 2003 and 2015. Six polychlorinated biphenyls (PCBs), 6 polyaromatic hydrocarbons (PAHs), and 5 organochlorine pesticides (OCPs) at 14 sites were assessed using data from the MONET passive sampling network. Significant decreases were found for most PCBs and OCPs whereas hexachlorobenzene (HCB) and most PAHs showed (mostly insignificant) increases. Spatial variability was rather low for PCBs and OCPs except for dichlorodiphenyltrichloroethane (DDT) and rather high for PAHs. The variability of the SVOC levels and trends depends on characteristics of the sites including their remoteness, landscape, population, and pollution sources. The sites can be grouped in distinct clusters, which helps to identify similar and, thereby, potentially redundant sites. This information is useful when monitoring networks need to be optimized regarding the location and number of sites.

Self-organizing maps for indications of airborne polychlorinated biphenyl (PCBs) and organochlorine pesticide (OCPs) dependence on spatial and meteorological parameters

This paper investigates the relation of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in air samples with meteorological parameters (temperature, atmospheric pressure and relative humidity) using the Kohonen self-organizing map (SOM). Both gas- and particle-adsorbed phase of 20 PCB congeners and 7 OCPs including the three new ones (α-HCH, β-HCH, and γ-HCH) listed in the Stockholm Convention were collected during a one-year period at urban locations in Zagreb (Croatia). Moving beyond existing studies, the SOM analysis showed that the meteorological characteristics of transient seasons such as spring had no influence on the dissimilarities in the behavior of PCBs and OCPs. Towards the identification of pollutant spatial patterns, the SOM did not isolate a clear phenomenon probably due to the absence of local pollution sources contributing to the elevated concentrations of these compounds. Overall, our results have shown that the SOM method, by recognizing significant differences among PCB and OCP seasonality, could be recommended in the analysis of pollutant distribution depending on temperature and atmospheric pressure.

HCH air levels derived from Bailín dumpsite dismantling (Sabiñánigo, Spain)

Remediation and management of dumpsites is a worldwide problem that must be addressed to protect human health and the environment. Aragon Government long-term objective is the control of air quality related to landfills used to dump organochlorine waste. The present study evaluated the influence of dismantling works performed in Bailín landfill, an hexachlorocyclohexane (1,2,3,4,5,6-hexaclorohexane; HCH) dumpsite located in the city of Sabiñánigo, Spain. A total of 65,000 t of HCH solid waste and 342,000 t of polluted soil were transferred to a new cell with additional isolating measures going beyond the Spanish legal requirements. To evaluate influence of excavation of the old cell, transfer of waste and the state once the works in Bailín area had finished, levels of α-, β-, γ-, δ- and ɛ- HCH isomers were analyzed in 112 air samples obtained from summer 2014 to autumn 2016 by using passive air samplers. Results showed that: i) the existence of the old landfill and/or the works performed during its dismantling were a source of HCH air contamination, ii) old landfill represented an HCH source even after dismantling work was completed, iii) other sources, tentatively associated to Sardas dumpsite and HCH production site (INQUINOSA Factory) were identified in the surroundings, where management should be addressed. Data comparison reflected a heavier contamination caused by the production, storage, and waste disposal than the corresponding to application of lindane and/or technical HCH in Spain. Meteorological dependence (temperature, solar radiation and relative humidity), α-/γ-HCH ratios and isomer profiles of HCH air concentrations were evaluated for temporal trends and geographic distribution.

An assessment of polyurethane foam passive samplers for atmospheric metals compared with active samplers

In this study, we conducted an assessment of polyurethane foam (PUF) passive sampling for metals combining active sampling. Remarkably, we found that the metals collected in the passive samples differed greatly from those collected in active samples. By composition, Cu and Ni accounted for significantly higher proportions in passive samples than in active samples, leading to significantly higher uptake rates of Cu and Ni. In assessing seasonal variation, metals in passive samples had higher concentrations in summer (excluding Heshan), which differed greatly from the pattern of active samples (winter > summer), indicating that the uptake rates of most metals were higher in summer than in winter. Overall, due to the stable passive uptake rates, we considered that PUF passive samplers can be applied to collect atmospheric metals. Additionally, we created a snapshot of the metal pollution in the Pearl River Delta using principal component analysis of PUF samples and their source apportionment.