Carbon nanotube-based magnetic and non-magnetic adsorbents for the high-efficiency removal of diquat dibromide herbicide from water: OMWCNT, OMWCNT-Fe3O4 and OMWCNT-κ-carrageenan-Fe3O4 nanocomposites

Preparation of iota-carrageenan@bentonite@4-phenyl-3-thiosemicarbazide ternary hydrogel for adsorption of Losartan potassium and sulfamethoxazole

A rising quantity of drugs has been discharged into the aquatic environment, posing a substantial hazard to public health. In the current work, a novel hydrogel (i.Carr@Bent@PTC), comprised of iota-carrageenan, bentonite, and 4-phenyl-3-thiosemicarbazide, was successfully prepared. The introduction of 4-phenyl-3-thiosemicarbazide and bentonite in iota-carrageenan significantly increased the mechanical strength of iota-carrageenan hydrogel and improved its degree of swelling, which can be attributed to the hydrophilic properties of PTC and Bent. The recorded contact angle was 70.8°, 59.1°, 53.9°, and 34.6° for pristine i.Carr, i.Carr@Bent, and i.Carr@Bent@PTC, respectively. The low contact angle measurement of the Bent and PTC loaded-i.Carr hydrogel was attributed to the hydrophilic Bent and PTC. The ternary i.Carr@Bent@PTC hydrogel demonstrated broad pH adaptability and excellent adsorption capacities for sulfamethoxazole (SMX) and losartan potassium (LP), i.e., 467.61 mg. g-1 and 274.43 mg. g-1 at 298.15 K, respectively. The pseudo-first-order (PSO) model provided a better fit for the adsorption kinetics. The adsorption of SMX and LP can be better explained by employing the Sips and Langmuir isotherm models. As revealed by XPS and FTIR investigations, π-π stacking, complexation, electrostatic interaction, and hydrogen bonding were primarily involved in the adsorption mechanisms.

An Updated Overview of Magnetic Composites for Water Decontamination

Water contamination by harmful organic and inorganic compounds seriously burdens human health and aquatic life. A series of conventional water purification methods can be employed, yet they come with certain disadvantages, including resulting sludge or solid waste, incomplete treatment process, and high costs. To overcome these limitations, attention has been drawn to nanotechnology for fabricating better-performing adsorbents for contaminant removal. In particular, magnetic nanostructures hold promise for water decontamination applications, benefiting from easy removal from aqueous solutions. In this respect, numerous researchers worldwide have reported incorporating magnetic particles into many composite materials. Therefore, this review aims to present the newest advancements in the field of magnetic composites for water decontamination, describing the appealing properties of a series of base materials and including the results of the most recent studies. In more detail, carbon-, polymer-, hydrogel-, aerogel-, silica-, clay-, biochar-, metal-organic framework-, and covalent organic framework-based magnetic composites are overviewed, which have displayed promising adsorption capacity for industrial pollutants.

Biomass waste-derived carbon materials for sustainable remediation of polluted environment: A comprehensive review

In response to the growing global concern over environmental pollution, the exploration of sustainable and eco-friendly materials derived from biomass waste has gained significant traction. This comprehensive review seeks to provide a holistic perspective on the utilization of biomass waste as a renewable carbon source, offering insights into the production of environmentally benign and cost-effective carbon-based materials. These materials, including biochar, carbon nanotubes, and graphene, have shown immense promise in the remediation of polluted soils, industrial wastewater, and contaminated groundwater. The review commences by elucidating the intricate processes involved in the synthesis and functionalization of biomass-derived carbon materials, emphasizing their scalability and economic viability. With their distinctive structural attributes, such as high surface areas, porous architectures, and tunable surface functionalities, these materials emerge as versatile tools in addressing environmental challenges. One of the central themes explored in this review is the pivotal role that carbon materials play in adsorption processes, which represent a green and sustainable technology for the removal of a diverse array of pollutants. These encompass noxious organic compounds, heavy metals, and organic matter, encompassing pollutants found in soils, groundwater, and industrial wastewater. The discussion extends to the underlying mechanisms governing adsorption, shedding light on the efficacy and selectivity of carbon-based materials in different environmental contexts. Furthermore, this review delves into multifaceted considerations, spanning the spectrum from biomass and biowaste resources to the properties and applications of carbon materials. This holistic approach aims to equip researchers and practitioners with a comprehensive understanding of the synergistic utilization of these materials, ultimately facilitating effective and affordable strategies for combatting industrial wastewater pollution, soil contamination, and groundwater impurities.

Dewatered Sludge Decorated with Nanoparticles for Alum Sludge Conditioning towards the Concept of "End-of-Waste"

The circular economy concept is leading environmental engineering in the search for "End-of-Waste" criteria. Untreated waste residue results from drinking water treatment plants, causing severe environmental issues, and its reuse is essential. In this regard, this investigation introduces the beneficial reuses of alum sludge cake to close the loop between sludge waste generation and reuse. Considering alum sludge as a resource for dewatering instead of its categorization as a waste reflects an "End-of-Waste" approach. Alum sludge cake was thermally calcined at 400 °C and named thermally treated alum sludge cake (TAS-cake). In this study, TAS-cake decorated with magnetite with a percent weight of 5 to 1%, respectively, was labeled as TAS-cake@Fe-(5-1). X-ray diffraction (XRD) and morphologies were applied to characterize the hybrid composite. A Fenton-based hybrid composite was applied to extrude water from alum sludge for 7 min of conditioning time. Furthermore, the factorial design based on response surface methodology (RSM) was applied to optimize the operational variables. TAS-cake@Fe-(5-1) and hydrogen peroxide revealed 1.2 g/L and 740 mg/L doses at pH 3.0, showing pronounced performance and revealing the highest capillary suction time (CST) reduction, which reached 53%. A temperature increase also showed a pronounced enhancement effect on the sludge dewaterability that reached 72% when 55 °C was applied. Thus, such a novel conditioner is a promising candidate for alum sludge conditioning.

Selective removal of Pb(II) from yellow rice wine using magnetic carbon-based adsorbent

BACKGROUND

The non-distilled property and prolonged production period of yellow rice wine have significantly increased the metal residue problem, posing a threat to human health. In this study, a magnetic carbon-based adsorbent, named magnetic nitrogen-doped carbon (M-NC), was developed for the selective removal of lead(II) (Pb(II)) from yellow rice wine.

RESULTS

The results showed that the uniformly structured M-NC could be easily separated from the solution, exhibiting a high Pb(II) adsorption capacity of 121.86 mg g-1 . The proposed adsorption treatment showed significant Pb(II) removal efficiencies (91.42-98.90%) for yellow rice wines in 15 min without affecting their taste, odor, and physicochemical characteristics of the wines. The adsorption mechanism studied by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared (FTIR) analyses indicated that the selective removal of Pb(II) could be attributed to the electrostatic interaction and covalent interaction between the empty orbital of Pb(II) and the π electrons of the N species on M-NC. Additionally, the M-NC showed no significant cytotoxicity on the Caco-2 cell lines.

CONCLUSION

Selective removal of Pb(II) from yellow rice wine was achieved using magnetic carbon-based adsorbent. This facile and recyclable adsorption operation could potentially address the challenge of toxic metal pollution in liquid foods. © 2023 Society of Chemical Industry.

Sustainable removal of phenol from wastewater using a biopolymer hydrogel adsorbent comprising crosslinked chitosan and κ-carrageenan

A biopolymer-based adsorbent comprising chitosan (CS) and κ-carrageenan (κ-Carr) was synthesised and evaluated to treat phenolic-contaminated water. The developed CS/κ-Carr hydrogel demonstrated excellent performance with a phenol adsorption uptake of 80 %. The morphologies of CS/κ-Carr hydrogels with different ratios of CS to κ-Carr ranging from 1:2 to 7:3 were characterised using scanning electron microscopy and atomic force microscopy; their chemical structures were investigated by spectral analyses using Fourier-transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry; their adsorption characteristics were determined using tests for swelling, chemical stability, hygroscopic moisture content, and hydrophilicity. Finally, a batch-type evaluation method demonstrated adsorption performance at 25 °C and pH 6.9. Adsorption isotherms and kinetic data were successfully obtained using the Freundlich and pseudo-second-order models, respectively. The results indicate that one-pot synthesis of an insoluble CS/κ-Carr hydrogel adsorbent exhibits considerable potential for the removal of phenol from aqueous solutions, providing an environmentally friendly technology enhancing the phenol adsorption performance of CS.

Investigation of the performance of activated carbon cloth to remove glyphosate, glufosinate, aminomethylphosphonic acid and bialaphos from aqueous solutions by adsorption/electrosorption

The present study investigates the removal of glyphosate, glufosinate, aminomethylphosphonic acid and bialaphos herbicides from their 5 × 10^-5 M aqueous solutions onto activated carbon cloth by adsorption and electrosorption. Analysis of these highly polar herbicides was achieved by UV-visible absorbance measurements, after derivatization with 9-fluorenylmethyloxycarbonyl chloride. The limit of quantification values of glyphosate, glufosinate, aminomethylphosphonic acid and bialaphos were 1.06 × 10^-6 mol L^-1, 1.38 × 10^-6 mol L^-1, 1.32 × 10^-6 mol L^-1 and 1.08 × 10^-6 mol L^-1, respectively. Glyphosate, glufosinate, aminomethylphosphonic acid and bialaphos were removed from their aqueous solutions with higher efficiencies by means of electrosorption (78.2%, 94.9%, 82.3% and 97%, respectively) than of open-circuit adsorption (42.5%, 22%, 6.9% and 81.8%, respectively). Experimental kinetic data were fitted to pseudo-first order and pseudo-second order kinetic models. It was determined that pseudo-second order kinetic model represents experimental data better with satisfactory coefficient of determination, r² (> 0.985) and normalized percent deviation, P (< 5.15) values. Adsorption isotherm data were treated according to Freundlich and Langmuir isotherm models. Based on the r² (> 0.98) and P (< 5.9) values, it was found that experimental data well fitted to Freundlich isotherm model. Adsorption capacities of activated carbon cloth for glyphosate, glufosinate, aminomethylphosphonic acid and bialaphos, expressed in terms of Freundlich constant, were calculated as 20.31, 118.73, 239.33 and 30.68 mmol g^-1, respectively. The results show that the studied ACC can be used in home/business water treatment systems as an adsorbent due to its high adsorption capacity.

Adsorption of nitrophenol onto a novel Fe3O4-κ-carrageenan/MIL-125(Ti) composite: process optimization, isotherms, kinetics, and mechanism

Water pollution is a dreadful affair that has incessantly aggravated, exposing our planet to danger. In particular, the persistent nitro aromatic compound like nitrophenols causes anxiety to the researchers due to their hazardous impacts, excessive usage, and removal difficulty. For this purpose, a novel multi-featured composite was constructed based on κ-Carrageenan (κ-Carr), MOF (MIL-125(Ti)), and magnetic Fe3O4 for efficient adsorptive removal of o-nitrophenol (o-NP). Interestingly, BET measurements revealed the high surface area of Fe3O4-κ-Carr/MIL-125(Ti) of about 163.27 m2/g, while VSM showed its excellent magnetic property (20.34 emu/g). The comparison study pointed out the synergistic effect between Fe3O4, κ-Carr, and MIL-125(Ti), forming a composite with an excellent adsorption performance toward o-NP. The adsorption data obeyed pseudo-second-order kinetic model, and Freundlich isotherm model was better fitted than Langmuir and Temkin. Furthermore, Langmuir verified the supreme adsorption capacity of o-NP onto Fe3O4-κ-Carr/MIL-125(Ti) since the computed qmax reached 320.26 mg/g at pH 6 and 25 °C. Furthermore, the XPS results postulated that the adsorption mechanism pf o-NP proceeded via H-bonding, π-π interaction, and electron donor-acceptor interactions. Interestingly, Fe3O4-κ-Carr/MIL-125(Ti) composite retained good adsorption characteristics after reusing for five cycles, suggesting its viable applicability as an efficient, renewable, and easy-separable adsorbent for removing nitro aromatic pollutants.

Recent advances in nanomaterials based sustainable approaches for mitigation of emerging organic pollutants

Emerging organic pollutants (EOPs) are a category of pollutants that are relatively new to the environment and recently garnered a lot of attention. The majority of EOPs includes endocrine-disrupting chemicals (EDCs), antibiotic resistance genes (ARGs), pesticides, dyes and pharmaceutical and personal care products (PPCPs). Exposure to contaminated water has been linked to an increase in incidences of malnutrition, intrauterine growth retardation, respiratory illnesses, liver malfunctions, eye and skin diseases, and fatalities. Consequently, there is a critical need for wastewater remediation technologies which are effective, reliable, and economical. Conventional wastewater treatment methods have several shortcomings that can be addressed with the help of nanotechnology. Unique characteristics of nanomaterials (NMs) make them intriguing and efficient alternative in wastewater treatment strategies. This review emphasis on the occurrence of divers emerging organic pollutants (EOPs) in water and their effective elimination via different NMs based methods with in-depth mechanisms. Furthermore, it also delves the toxicity assessment of NMs and critical challenges, which are crucial steps for practical implementations.

Green and Superior Adsorbents Derived from Natural Plant Gums for Removal of Contaminants: A Review

The ubiquitous presence of contaminants in water poses a major threat to the safety of ecosystems and human health, and so more materials or technologies are urgently needed to eliminate pollutants. Polymer materials have shown significant advantages over most other adsorption materials in the decontamination of wastewater by virtue of their relatively high adsorption capacity and fast adsorption rate. In recent years, "green development" has become the focus of global attention, and the environmental friendliness of materials themselves has been concerned. Therefore, natural polymers-derived materials are favored in the purification of wastewater due to their unique advantages of being renewable, low cost and environmentally friendly. Among them, natural plant gums show great potential in the synthesis of environmentally friendly polymer adsorption materials due to their rich sources, diverse structures and properties, as well as their renewable, non-toxic and biocompatible advantages. Natural plant gums can be easily modified by facile derivatization or a graft polymerization reaction to enhance the inherent properties or introduce new functions, thus obtaining new adsorption materials for the efficient purification of wastewater. This paper summarized the research progress on the fabrication of various gums-based adsorbents and their application in the decontamination of different types of pollutants. The general synthesis mechanism of gums-based adsorbents, and the adsorption mechanism of the adsorbent for different types of pollutants were also discussed. This paper was aimed at providing a reference for the design and development of more cost-effective and environmentally friendly water purification materials.

Waste Valorization of a Recycled ZnCoFe Mixed Metal Oxide/Ceftriaxone Waste Layered Nanoadsorbent for Further Dye Removal

Waste valorization of spent wastewater nanoadsorbents is a promising technique to support the circular economy strategies. The terrible rise of heavy metal pollution in the environment is considered a serious threat to the terrestrial and aquatic environment. This led to the necessity of developing cost-effective, operation-convenient, and recyclable adsorbents. ZnCoFe mixed metal oxide (MMO) was synthesized using co-precipitation. The sample was characterized using X-ray powder diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. Factors affecting the adsorption process such as pH, the dose of adsorbent, and time were investigated. ZnCoFe MMO showed the maximum adsorption capacity of 118.45 mg/g for ceftriaxone sodium. The spent MMO was recycled as an adsorbent for malachite green (MG) removal. Interestingly, the spent adsorbent showed 94% removal percent for MG as compared to the fresh MMO (90%). The kinetic investigation of the adsorption process was performed and discussed. In addition, ZnCoFe MMO was tested as an antimicrobial agent. The proposed approach opens up a new avenue for recycling wastes after adsorption into value-added materials for utilization in adsorbent production with excellent performance as antimicrobial agents.

Efficient Removal of Pb2+ from Water by Bamboo-Derived Thin-Walled Hollow Ellipsoidal Carbon-Based Adsorbent

Lead ion (Pb²⁺) is one of the most common water pollutants. Herein, with bamboo as the raw material, we fabricate a thin-walled hollow ellipsoidal carbon-based adsorbent (CPCs900) containing abundant O-containing groups and carbon defects and having a specific surface area as large as 730.87 m² g^-1. CPCs900 shows a capacity of 37.26 mg g^-1 for adsorbing Pb²⁺ in water and an efficiency of 98.13% for removing Pb²⁺ from water. This is much better than the activated carbon commonly used for removing Pb²⁺ from water (12.19 mg g^-1, 30.48%). The bond interaction of Pb²⁺ with the O-containing groups on CPCs900 and the electrostatic interaction of Pb²⁺ with the electron-rich carbon defects on CPCs900 could be the main forces to drive Pb²⁺ adsorption on CPCs900. The outstanding adsorption performance of CPCs900 could be due to the abundant O-containing groups and carbon defects as well as the large specific surface area of CPCs900. Bamboo has a large reserve and a low price. The present work successfully converts bamboo into adsorbents with outstanding performances in removing Pb²⁺ from water. This is of great significance for meeting the huge industrial demand on highly efficient adsorbents for removing toxic metal ions from water.

Facile Synthesis and Life Cycle Assessment of Highly Active Magnetic Sorbent Composite Derived from Mixed Plastic and Biomass Waste for Water Remediation

Plastic and biomass waste pose a serious environmental risk; thus, herein, we mixed biomass waste with plastic bottle waste (PET) to produce char composite materials for producing a magnetic char composite for better separation when used in water treatment applications. This study also calculated the life cycle environmental impacts of the preparation of adsorbent material for 11 different indicator categories. For 1 functional unit (1 kg of pomace leaves as feedstock), abiotic depletion of fossil fuels and global warming potential were quantified as 7.17 MJ and 0.63 kg CO₂ equiv for production of magnetic char composite materials. The magnetic char composite material (MPBC) was then used to remove crystal violet dye from its aqueous solution under various operational parameters. The kinetics and isotherm statistical theories showed that the sorption of CV dye onto MPBC was governed by pseudo-second-order, and Langmuir models, respectively. The quantitative assessment of sorption capacity clarifies that the produced MPBC exhibited an admirable ability of 256.41 mg g^-1. Meanwhile, the recyclability of 92.4% of MPBC was demonstrated after 5 adsorption/desorption cycles. Findings from this study will inspire more sustainable and cost-effective production of magnetic sorbents, including those derived from combined plastic and biomass waste streams.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Preparation and characterization of cellulose nanocrystals from spent edible fungus substrate

BACKGROUND

Spent edible fungus substrates were identified as potential sources to produce cellulose derivatives, namely purified cellulose and dicarboxyl cellulose nanocrystal (DCNC). Purified celluloses were obtained via chemical treatments and then oxidized by sequential periodate-chlorite without mechanical process. The structural properties of the DCNCs were characterized by transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and thermal gravimetric analysis (TGA).

RESULTS

XRD results showed that the cellulose I structure was maintained, however, the crystallinity index decreased after oxidation process. The initial pyrolysis temperature of DCNCs ranged from 242 to 344 °C. TEM results revealed that DCNC was rod-shaped with an average length and width of 130.88 nm and 7.3 nm, respectively. The average specific surface area (SSA) was 366.67 m²  g^-1 . The carboxyl content was around 3.485 mmol g^-1 . Finally, the adsorption capacity for contaminations was 76.98, 126.22, 64.44 and 9.63 mg g^-1 for copper ion (Cu²⁺ ), lead ion (Pb²⁺ ), chromium (Cr³⁺ ) and amoxicillin (AMX), respectively.

CONCLUSION

This work showed a sequentially chemical oxidation for preparing nanocellulose from secondary agricultural waste with many functional applications. © 2021 Society of Chemical Industry.

Ethylenediaminetetraacetate functionalized MgFe layered double hydroxide/biochar composites for highly efficient adsorptive removal of lead ions from aqueous solutions

The application of layered double hydroxides (LDHs) of MgFe and its composites with biochar of Eucalyptus camdulensis (Eb) and ethylenediaminetetraacetic acid (EDTA) was explored in a batch study to mitigate toxic lead ions (Pb²⁺) from synthetic wastewater solutions. SEM images revealed that MgFe/LDH composites with Eb were successfully formed, while FTIR spectra confirmed the successful adsorption of Pb²⁺ onto the MgFe/LDH and composite adsorbents. Batch equilibrium was attained after 60 min, then the adsorption capacity gradually increased. An increase in adsorption capacity (and a 60% decrease in the percentage removal) was observed by increasing the initial Pb²⁺ concentration, and the highest value was 136 mg g^-1 for MgFe/LDH-Eb_EDTA. A 50–60% increase in both the adsorption capacities and percent removal was seen in the pH range of 2–6. The second-order kinetic model had a nearly perfect fitting, suggesting that chemisorption was the mechanism controlling adsorption. The Langmuir isotherm model best presented the adsorption data, suggesting that the Pb²⁺ adsorption was monolayer, and predicted a better affinity between the adsorbent surface and absorbed Pb²⁺ for MgFe/LDH-Eb_EDTA in comparison to the other two adsorbents. The D–R isotherm suggested that the adsorption system was physical based on E values for all three adsorbents, while the Temkin isotherm model suggested that Pb²⁺ adsorption was heterogeneous. Finally, the Sips and R–P isotherms predicted that the adsorption of Pb²⁺ on the surface of the adsorbents was homogeneous and heterogeneous.

Preparation and characterization of carrageenan-embedded lanthanum iron oxide nanocomposite for efficient removal of arsenite ions from water

Arsenic (As) contamination in drinking water has grown into a global concern in recent years, which demands the development of various As remediation approaches. In this study, a new magnetic nanocomposite, carrageenan-embedded LaFeO₃ nanoparticles (abbreviated as CA-LaFeNPs) was synthesized by a sol-gel process and used to remove arsenite [As(III)] from water. The synthesized magnetic adsorbent was characterized by powder XRD, SEM, FTIR, VSM, and TGA. The adsorbent gel, CA-LaFeNP was mainly with LaFeO₃ in nanoscale particles with a saturation magnetization of 13.33 emu g^-1 and could be easily separated from water with a simple hand-held magnet in 2 minutes. The adsorption outcomes of the CA-LaFeNPs could be finely interpreted by Langmuir, Freundlich, and Tempkin isotherm models. The Langmuir isotherm model appears to have good regression coefficients, and maximum adsorption capacity was estimated to be 91 mg g^-1 for CA-LaFeNPs at 27 °C and pH 7. The removal efficiency observed for CA-FeNPs was 91% up to the As(III) concentration of 700 mg L^-1, while it decreased to 85% when the As(III) concentration was above 1200 mg L^-1. This low-cost and environmentally-friendly magnetic nanocomposite, CA-LaFeNPs could be more appropriate for real-world applications and also a substitute for the traditional magnetic nanoparticles.

Biosorption of arsenite (As[III]) using Saccharomyces cerevisiae SRCM 501804 isolated from Korean turbid rice wine

The potentiality of Saccharomyces cerevisiae SRCM 501804 to remove arsenite (As[III]) in an aqueous solution was investigated in this study. The S. cerevisiae SRCM 501804 was isolated from Korean turbid rice wine (Makgeolli). The S. cerevisiae SRCM 501804 was characterized by phylogenetic analysis, Fourier transform infrared (FT-IR) spectroscopy, visual minerals technologies (MINTEQ) model, and point of zero charge (pH_pzc). The relationship between the factors (pH, biosorbent dosage, contact time, and concentration) and biosorption capacity was investigated. The S. cerevisiae SRCM 501804 was removed 31.1-90.1% of the As(III) depending on the initial biomass dosage within 1 h. Co-existing anions in aqueous solution showed a negative influence on the biosorption performance of As(III) in the order Cl^- > NO₃^- > SO₄^2- > CO₃^2-. The results of isotherms and kinetics suggested the Langmuir (R² > 0.95) and Pseudo-second order (R² > 0.99) models fit well with the equilibrium experimental data. The maximum biosorption capacity (q_m) of S. cerevisiae SRCM 501804 biomass for As(III) was found to be 113.9 mg/g from Langmuir isotherm. Based on the results, it can be concluded that the biomass of S. cerevisiae SRCM 501804 could be used as an effective bio-sorbent for As(III) biosorption in an aqueous solution.

Fabrication of superparamagnetic adsorbent based on layered double hydroxide as effective nanoadsorbent for removal of Sb (III) from water samples

In this study, the superparamagnetic adsorbent as Fe@Mg‐Al LDH was synthesised by different methods with two steps for the removal of heavy metal ions from water samples. An easy, practical, economical, and replicable method was introduced to remove water contaminants, including heavy ions from aquatic environments. Moreover, the structure of superparamagnetic adsorbent was investigated by various methods including Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and vibrating sample magnetometer. For better separation, ethylenediaminetetraacetic acid ligand was used, forming a complex with antimony ions to create suitable conditions for the removal of these ions. Cadmium and antimony ions were studied by floatation in aqueous environments with this superparamagnetic adsorbent owing to effective factors such as pH, amount of superparamagnetic adsorbent, contact time, sample temperature, volume, and ligand concentration. The model of Freundlich, Langmuir, and Temkin isotherms was studied to qualitatively evaluate the adsorption of antimony ions by the superparamagnetic adsorbent. The value of loaded antimony metal ions with Fe@Mg‐Al LDH was resulted at 160.15 mg/g. The standard deviation value in this procedure was found at 7.92%. The desorption volume of antimony metal ions by the adsorbent was found to be 25 ml. The thermodynamic parameters as well as the effect of interfering ions were investigated by graphite furnace atomic absorption spectrometry.

Carrageenan-based nano-hybrid materials for the mitigation of hazardous environmental pollutants

Fast industrialization and population growth are associated with the increased release of hazardous contaminants in the environment. These hazardous substances, including pharmaceutical, biomedical, personal-care products, heavy metals, endocrine-disrupters, and colorants, pollute the ecosystem by disturbing nature's balance. Nanotechnology has paved new horizons in biochemical engineering by designing novel approaches of integrating nanoscale science with biotechnology to construct improved quality materials for target uptake of pollutants. Recently, nanostructured materials have emerged as research and development frontiers owing to their excellent properties. The tailored designing of nanohybrids constructs with physicochemical alteration enables the nano-bioadsorbent with high target specificity and efficiency. The development of eco-friendly, biodegradable, cost-efficient, and biopolymer-based nanohybrid constructs is gaining attention to remove hazardous environmental pollutants. κ-carrageenan biopolymer is frequently used with different nanomaterials to design nanohybrid bio-adsorbents to remove various contaminants. Herein, the potentialities of carrageenan-based nanohybrid constructs in environmental remediation have been summarized. Different nanostructures, e.g., silica, non-magnetic/magnetic, carbon nanotubes/nanorods, nanoclay/nanomembrane, metal organic frameworks, graphene oxide, and other nanomaterials have been described in combination with carrageenan biopolymers focusing on environmental remediation.

Synthesis of magnetic tungsten disulfide/carbon nanotubes nanocomposite (WS2/Fe3O4/CNTs-NC) for highly efficient ultrasound-assisted rapid removal of amaranth and brilliant blue FCF hazardous dyes

In this research, the potentiality of magnetic tungsten disulfide/carbon nanotubes nanocomposite (WS₂/Fe₃O₄/CNTs-NC) as an adsorbent for the ultrasound-assisted removal of amaranth (AM) and brilliant blue FCF (BB FCF) dyes was investigated. The experiments were conducted using a central composite design (CCD) with the inputs of solution pH (X₁: 2.0-10), adsorbent mass (X₄: 4-20 mg), AM concentration (X₂: 10-50 mg L^-1), BB FCF concentration (X₃: 10-50 mg L^-1), and sonication time (X₅: 2-12 min). At the optimum conditions, the removal percentages of 99.30% and 98.50% were obtained for AM and BB FCF, respectively. The adsorption of the dyes was described by Langmuir isotherm and pseudo-second-order (PSO) kinetic models. The maximum adsorption capacities of AM and BB FCF were 174.8 mg g^-1 and 166.7 mg g^-1, respectively. The adsorption thermodynamic study showed that the adsorption of the dyes occurred endothermically and spontaneously. The removal percentages of AM and BB FCF from the real samples were in the range of 94.52-99.65% for the binary solutions. The removal percentage for each dye after five cycles of adsorption/desorption was > 90%. This work provides a useful insight to the potential application of CNTs-based magnetic nanocomposite for the treatment of wastewaters contaminated with dyes.

Alkali treated water chestnut (Trapa natans L.) shells as a promising phytosorbent for malachite green removal from water

Search for eco-friendly adsorbents for sustainable dye treatment is on the rise. The present study demonstrated the enhanced removal of malachite green (MG) with alkali-modified shells of water chestnut (AWCN) under optimized physio-chemical parameters. Alkali treatment significantly reduces the lignocellulosic components which in turn increased the water stability. The material was been characterized by pHzpc, FTIR, FESEM-EDAX, and BET surface area analysis. pH-dependent adsorption was noticed and the maximum adsorption capacity was determined as 136.46 mg/g. Adsorption followed pseudo-second-order kinetics (R²=0.99) and Langmuir isotherm model (R²=0.99). Thermodynamic parameters suggested that the adsorption process is spontaneous (ΔG°= -2.99 kJ/mol), favorable and endothermic (ΔH°=34.72 kJ/mol). Simple regeneration allows multi-cycle use with minimal loss of activity. The mechanism has been proposed to be a combination of electrostatic interaction, H-bonding, and π-π stacking between AWCN and MG. In conclusion, alkali modification of Trapa natans L. shells provides excellent removal of MG from water.

Regenerable magnetic aminated lignin/Fe3O4/La(OH)3 adsorbents for the effective removal of phosphate and glyphosate

Phosphates and organophosphorus cause environmental pollution, and excessive phosphate leads to water eutrophication. Glyphosate, an organophosphorus herbicide, harms the environment and human health. In this study, regenerable magnetic AL/Fe₃O₄/La(OH)₃ adsorbents were developed by modifying Fe₃O₄ and La(OH)₃ on aminated lignin (AL) for phosphate and glyphosate removal. The adsorption capacity for phosphate and glyphosate reached 60.36 mg g^-1 and 83.87 mg g^-1 when the initial concentrations were 150 mg L^-1 and 250 mg L^-1, respectively. The thermodynamic data showed that adsorption is a spontaneous and endothermic process. Adsorption can be applied at pH values ranging from 3 to 11 and is more suitable under acidic conditions. Fe₃O₄ and La(OH)₃ both enhanced the adsorption capacities of phosphate and glyphosate. Phosphate and glyphosate compete slightly when coexisting in the adsorption process at low concentrations. Due to the magnetic properties of Fe₃O₄, the adsorbents can be separated rapidly and effectively with an external magnetic field. 89% adsorption capacity remained after four adsorption-desorption recycles. Thus, AL/Fe₃O₄/La(OH)₃ shows potential for phosphate and glyphosate removal as an effective and reusable adsorbent.

A highly efficient nanoscale tapioca starch prepared by high-speed jet for Cu2+ removal in simulated industrial effluent

BACKGROUND

Nanoscale tapioca starch (NTS) was successfully developed by high-speed jet in our previous study. In this study, the adsorption capacity of Cu²⁺ onto NTS was further discussed. The optimal adsorption conditions (pH, contact time, contact temperature, initial Cu²⁺ concentration, and adsorbent concentration), adsorption kinetics, isotherms, and thermodynamic were also evaluated.

RESULTS

The results showed that NTS exhibited excellent performance in adsorption of Cu²⁺ , with adsorption capacities of 122.31 mg g^-1 for Cu²⁺ (pH 7, 0.04 g L^-1 , 0.2 g L^-1 , 313.15 K and 10 min). The pseudo-second-order and Langmuir isotherms models could be used to explain the adsorption kinetics and adsorption equilibrium, respectively. The thermodynamic results showed that the adsorption process was spontaneous and endothermic with an increase in entropy. Cu²⁺ was adsorbed onto NTS, which was confirmed by energy dispersive spectrometry analysis.

CONCLUSION

These findings indicated that NTS might be an effective, environment-friendly and renewable bio-resource adsorbent for removing heavy metals in industrial effluent. © 2021 Society of Chemical Industry.

Mitigation of environmentally hazardous pollutants by magnetically responsive composite materials

At present, environmental contamination has become an emerging issue among researchers. These facts are due to the adverse impacts of an alarming number of recalcitrant contaminants that can affect both humans and animals. There is an urgent need to develop eco-friendly approaches to mitigate the effects of toxic pollutants from the environment. Magnetically responsive composite-based sorbents are very interesting and popular materials for pollutant abatement owing to the high specific surface area, superior adsorption capacity, and magnetic properties, which make their easy separation from sample solution/media. In this review article, we discuss various synthesis approaches, key physicochemical properties, and applications of magnetic composites for pollutant removal. Current gaps for coping with contamination are identified, and a comprehensive outlook in pollutant treatment using magnetic composites is outlined. This study unveils new horizons to researches for better understanding the properties of magnetically-composite-based sorbents and their application in environmental remediation.

Sorptive removal of methylene blue from water by magnetic multi-walled carbon nanotube composites

In the present study, five magnetic multi-walled carbon nanotubes (MMWCNTs) with different diameters were prepared and their performance on the sorptive removal of methylene blue (MB) from water was investigated. Transmission electron microscope, scanning electron microscope, Fourier transform infrared spectrometer, X-ray diffraction, and vibrating sample magnetometer confirm that the surface of these MMWCNTs has been decorated by Fe₃O₄ nanoparticles, which renders the MMWCNTs superparamagnetic. Thus, these MMWCNTs can be easily separated from water after the adsorption. During the adsorption process, pH slightly affected the removal efficiency of MB and the adsorption performed better under weak alkaline conditions. Adsorption kinetics followed the pseudo-second-order kinetic model well, and the Dubinin-Radushkevich model fitted the isotherms best. The maximum adsorption capacity for MB reached 204.2 mg/g, and the values decreased with increasing diameters of MMWCNTs due to decreasing specific surface areas. The thermodynamics parameters indicated the spontaneous and exothermic nature of the adsorption. The reusability test showed that MMWCNTs could be used for 6 cycles without significant loss of the adsorption capacity. And common ions (K⁺, Na⁺, Ca²⁺ and Al³⁺) and SDS in water did not show greatly effects on the removal efficiency of MB. Hence, MMWCNTs prepared in this study could be promising adsorbents for dyes removal from wastewater.

In vitro removal of paraquat and diquat from aqueous media using raw and calcined basil seed

Raw and calcined basil seeds (BS and BS1000, respectively) were evaluated for their ability to remove herbicides such as paraquat and diquat. The physicochemical properties of BS and BS1000 were determined and the effects of contact time and initial concentration on paraquat and diquat adsorption were assessed. After calcination treatment, the number of pores in BS increased, and the specific surface area was increased from 0.265 to 86.902 m² g^-1. The quantity of herbicides adsorbed using BS1000 was greater than that using either BS or medicinal-grade carbon. Additionally, the adsorption quantity increased with the increase in contact time and initial concentration of herbicide. Therefore, BS1000 is a potential resource for the removal of herbicides. Moreover, BS and BS1000 exhibited the capacity for herbicide adsorption in simulated intestinal fluid.

Effects of bamboo shoots (Phyllostachys edulis) dietary fibers prepared by different processes on the adsorption characteristics of polyphenols

In this work, adopting bamboo shoots as raw materials, three kinds of bamboo shoots dietary fibers were prepared by physical, chemical, and enzymatic methods, termed BSPDF, BSCDF, and BSEDF, respectively, and then investigating their adsorption characteristics for polyphenols through soaked them in different concentrations and different types of polyphenol solutions. The results of the adsorption kinetics showed that the adsorption amounts of polyphenols significantly increased during the initial 30 s of soaking, and the subsequent adsorption rate became slower and slower achieving adsorption kinetics after 2 hr. Moreover, their adsorption isotherms met well with the Langmuir model, but differences in saturated adsorption capacity and adsorption rate. More impressively, the maximum adsorption capacities Q_max of them to polyphenols followed the order of catechin > phlorizin dihydrate > chlorogenic acid > gallic acid. In addition, BSPDF, BSCDF and BSEDF all could adsorb a large amount of free catechin with the saturated adsorption capacity of 15.77, 14.69 and 16.76 mg/g, respectively and which exhibited blue and green characteristic fluorescence emission signals in the presence of catechin. Therefore, compared with the other two methods, the enzymatic hydrolysis method retains the spatial network structure of the fibrils, has a larger surface area and porosity, retains the original bound phenol of fibrils, with stronger physiological activity and more potential applications. PRACTICAL APPLICATIONS: Polyphenols are easy to oxidize in vitro, and are easily affected by gastric acid and various enzymes in vivo, which reduce their physiological activity. However, dietary fibers can resist the destruction of various enzymes and acids in the gastrointestinal tract. It is increasingly being realized that dietary fibers play a very important role in adsorbing polyphenols into its network structure, which can achieve the purpose of protecting polyphenols. In this contest, the bamboo shoots dietary fibers prepared by different methods had different adsorption characteristics for polyphenols. The aim of current study was to compare the saturated adsorption capacity of three kinds of dietary fibers to polyphenols, and screen suitable processing technology. We believed that our findings could be to provide basis for the development of new functional foods.

One-Step Preparation of Chitosan-Based Magnetic Adsorbent and Its Application to the Adsorption of Inorganic Arsenic in Water

Chitosan is a kind of biodegradable natural polysaccharide, and it is a very promising adsorber material for removing metal ions from aqueous solutions. In this study, chitosan-based magnetic adsorbent CMC@Fe₃O₄ was synthesized by a one-step method using carboxymethyl chitosan (CMC) and ferric salts under relatively mild conditions. The Fe₃O₄ microspheres were formed and the core-shell structure of CMC@Fe₃O₄ was synthesized in the meantime, which was well characterized via SEM/TEM, XRD, VSM, FT-IR, thermo gravimetric analysis (TGA), XPS, size distribution, and zeta potential. The effects of initial arsenic concentration, pH, temperature, contact time, and ionic strength on adsorption quantity of inorganic arsenic was studied through batch adsorption experiments. The magnetic adsorbent CMC@Fe₃O₄ displayed satisfactory adsorption performance for arsenic in water samples, up to 20.1 mg/g. The optimal conditions of the adsorption process were pH 3.0, 30-50 °C, and a reaction time of 15 min. The adsorption process can be well described by pseudo-second-order kinetic model, suggesting that chemisorption was main rate-controlling step. The Langmuir adsorption model provided much higher correlation coefficient than that of Freundlich adsorption model, indicating that the adsorption behavior is monolayer adsorption on the surface of the magnetic adsorbents. The above results have demonstrated that chitosan-based magnetic adsorbent CMC@Fe₃O₄ is suitable for the removal of inorganic arsenic in water.