Nitrogen and sulfur codoped graphene aerogels as absorbents and visible light-active photocatalysts for environmental remediation applications

Advances in the synthesis of heteroatom-doped graphene-based materials and their application in sensors, adsorbents and catalysis

In recent years, as a new type of carbon material, graphene has attracted much attention owing to its high conductivity, large specific surface area and excellent chemical stability. After introducing heteroatoms into graphene, the physical, chemical and biological properties of doped graphene are significantly enhanced. This review focuses on synthesis methods for N, B, P and S co-doped graphene and graphene-based composites and comprehensively discusses their recent applications in the fields of sensors, adsorbents and catalysis. The challenges and application prospects of heteroatom doped graphene materials are also proposed. This study provides a reference and guidance for the development and application of new doped graphene materials.

One-step calcination synthesis of 2D/2D g-C3N4/WS2 van der Waals heterojunction for visible light-induced photocatalytic degradation of pharmaceutical pollutants

It is well-documented that accumulation of pharmaceutically active compounds (PhACs), such as antibiotics, in aquatic ecosystems is a prominent environmental hazard. Herein, a series of 2D materials-based heterojunctions, conceptualized based on the integration of graphitic carbon nitride (g-C₃N₄) with tungsten disulfide (WS₂), was fabricated through a facile one-step calcination process, and systematically evaluated for eliminating tetracycline (TC) and sulfamethoxazole (SMX) from aqueous matrices. The microstructure, optical properties, and surface chemistry of the as-prepared composites were examined with a range of microscopy and spectroscopy techniques. In comparison with pristine g-C₃N₄ or bare WS₂, the g-C₃N₄/WS₂ material, with optimal WS₂ loading, showed significantly improved photocatalytic activity, towards degradation of TC (84%) and SMX (96%), under visible light. Free radical scavenging experiments revealed that superoxide anions and hydroxyl radicals were predominantly responsible for the rapid breakdown of the PhACs. In addition, the dissociation intermediates and residues were identified and the plausible photocatalytic degradation pathways of TC and SMX over the as-constructed 2D/2D heterojunction were discussed. Further, the photocatalysis end products were non-toxic, as inferred via the resazurin cell viability assay, employing Escherichia coli as a model organism. Most importantly, the 2D/2D g-C₃N₄/WS₂ architecture was structurally resilient and exhibited a fairly stable cycling performance for persistent usage in wastewater treatment. The outcomes of this study testify that 2D/2D heterojunction of g-C₃N₄ fragments and WS₂ nanosheets holds great promise for destroying antibiotics or their metabolites, usually present in wastewaters.

Hierarchical Nanoflowers of MgFe2O4, Bentonite and B-,P- Co-Doped Graphene Oxide as Adsorbent and Photocatalyst: Optimization of Parameters by Box–Behnken Methodology

In the present study, nanocomposites having hierarchical nanoflowers (HNFs) -like morphology were synthesized by ultra-sonication approach. HNFs were ternary composite of MgFe₂O₄ and bentonite with boron-, phosphorous- co-doped graphene oxide (BPGO). The HNFs were fully characterized using different analytical tools viz. X-ray photoelectron spectroscopy, scanning electron microscopy, energy dispersion spectroscopy, transmission electron microscopy, X-ray diffraction, vibrating sample magnetometry and Mössbauer analysis. Transmission electron micrographs showed that chiffon-like BPGO nanosheets were wrapped on the MgFe₂O₄-bentonite surface, resulting in a porous flower-like morphology. The red-shift in XPS binding energies of HNFs as compared to MgFe₂O₄-bentoniteand BPGO revealed the presence of strong interactions between the two materials. Box–Behnken statistical methodology was employed to optimize adsorptive and photocatalytic parameters using Pb(II) and malathion as model pollutants, respectively. HNFs exhibited excellent adsorption ability for Pb(II) ions, with the Langmuir adsorption capacity of 654 mg g⁻¹ at optimized pH 6.0 and 96% photocatalytic degradation of malathion at pH 9.0 as compared to MgFe₂O₄-bentonite and BPGO. Results obtained in this study clearly indicate that HNFs are promising nanocomposite for the removal of inorganic and organic contaminants from the aqueous solutions.

Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation

Industrial expansion and increased water consumption have created water scarcity concerns. Meanwhile, conventional wastewater purification methods have failed to degrade recalcitrant pollutants efficiently. The present review paper discusses the recent advances and challenges in photocatalytic processes applied for industrial effluents treatment, with respect to phenolic compounds degradation. Key operational parameters including the catalyst loading, light intensity, initial pollutants concentration, pH, and type and concentrations of oxidants are evaluated and discussed. Compared to the other examined controlling parameters, pH has the highest effect on the photo-oxidation of contaminants by means of the photocatalyst ionization degree and surface charge. Furthermore, major phenolic compounds derived from industrial sources are comprehensively presented and the applicability of photocatalytic processes and the barriers in practical applications, including high energy demand, technical challenges, photocatalyst stability, and recyclability have been explored. The importance of energy consumption and operational costs for realistic large-scale processes are also discussed. Finally, research gaps in this area and the suggested direction for improving degradation efficiencies in industrial applications are presented. In the light of these premises, selective degradation processes in real water matrices such as untreated sewage are proposed.

Multi-heteroatom-doped carbocatalyst as peroxymonosulfate and peroxydisulfate activator for water purification: A critical review

Catalytic activation of peroxymonosulfate (PMS) and peroxydisulfate (PDS) (or collectively known as persulfate, PS) using carbocatalyst is increasingly gaining attention as a promising technology for sustainable recalcitrant pollutant removal in water. Single heteroatom doping using either N, S, B or P is widely used to enhance the performance of the carbocatalyst for PS activation. However, the performance enhancement from single heteroatom doping is limited by the type of heteroatom used. To further enhance the performance of the carbocatalyst beyond the limit of single heteroatom doping, multi-heteroatom doping can be conducted. This review aims to provide a state-of-the-art overview on the development of multi-heteroatom-doped carbocatalyst for PS activation. The potential synergistic and antagonistic interactions of various heteroatoms including N and B, N and S, N and P, and N and halogen for PS activation are evaluated. Thereafter, the preparation strategies to develop multi-heteroatom-doped carbocatalyst including one-step and multi-step preparation approaches along with the characterization techniques are discussed. Evidence and summary of the performance of multi-heteroatom-doped carbocatalyst for various recalcitrant pollutants removal via PS activation are also provided. Finally, the prospects of employing multi-heteroatom-doped carbocatalyst including the need to study the correlation between different heteroatom combination, surface moiety type, and amount of dopant with the PS activation mechanism, identifying the best heteroatom combination, improving the durability of the carbocatalyst, evaluating the feasibility for full-scale application, developing low-cost multi-heteroatom-doped carbocatalyst, and assessing the environmental impact are also briefly discussed.

Synthesis of pure and lanthanum-doped barium ferrite nanoparticles for efficient removal of toxic pollutants

Treatment of wastewater for reuse is an important strategy undertaken to deal with water scarcity. In this study, pure and La-doped barium ferrites were produced using a facile hydrothermal technique. Lanthanum was doped at 1% and 2% molar ratio and the obtained product was analyzed for further confirmation of crystal structure, optical properties, vibrational properties, and morphology. X-ray powder diffraction pattern confirmed material formation. Bandgap energies were estimated from a Tauc plot. The vibrational properties of the pure and doped samples were examined by Fourier-transform infrared spectra. The pure barium ferrite sample showed a spherical agglomerated morphology. The 1% La-doped barium ferrite sample showed reduced agglomeration and the particles were attached together. The 2% La-doped barium ferrite sample showed small nanoballs with no agglomeration on the surface. The transmission electron microscopy images confirmed no agglomeration for the 2% La-BaFe₂O₄ sample. The M-H loop revealed the ferromagnetic behavior of the pristine and doped samples. The 2% La-BaFe₂O₄ sample had 24.53 m²/g surface area. The photocatalytic activity was examined employing degrading methylene blue under ultraviolet (UV) and visible light. Prepared product showed better efficiency on UV light exposure. The 2% La-doped barium ferrite sample exhibited almost 80% of efficiency under UV light and 85% efficiency under visible light toward toxic pollutants. The sample attained 0.02 min^-1 rate constant value. The main advantage of ferrite samples is that the particles can be separated by magnetic methods and the water will be fit for reuse. The sample will be a promising candidate for use in the wastewater treatment.

Synthesis of 3D graphene-based materials and their applications for removing dyes and heavy metals

Contamination of water streams by dyes and heavy metals has become a major problem due to their persistence, accumulation, and toxicity. Therefore, it is essential to eliminate and/or reduce these contaminants before discharge into the natural environment. In recent years, 3D graphene has drawn intense research interests owing to its large surface area, superior charge conductivity, and thermal conductivity properties. Due to their unique surface and structural properties, 3D graphene-based materials (3D GBMs) are regarded as ideal adsorbents for decontamination and show great potential in wastewater or exhaust gas treatment. Here, this minireview summarizes the recent progress on 3D GBMs synthesis and their applications for adsorbing dyes and heavy metals from wastewater based on the structures and properties of 3D GBMs, which provides valuable insights into 3D GBMs' application in the environmental field.

Graphene-based materials for adsorptive removal of pollutants from water and underlying interaction mechanism

Graphene-based materials have received much attention as attractive candidates for the adsorptive removal of pollutants from water due to their large surface area and diverse active sites for adsorption. The design of graphene-based adsorbents for target pollutants is based on the underlying adsorption mechanisms. Understanding the adsorption performance of graphene-based materials and its correlation to the interaction mechanisms between the pollutants and adsorbents is crucial to the further development of graphene-based functional materials and their practical applications. This review summarizes recent advances on the development of graphene-based materials for the adsorption of heavy metal ions, dyes, and oils, and the co-adsorption of their mixture from water. The material design, performance, regeneration and reuse of adsorbents, and the associated adsorption mechanisms are discussed. Various techniques for mechanistic studies of the adsorption of heavy metal ions, dyes, and oils on graphene-based materials are highlighted. The remaining challenges and perspectives for future development and investigation of graphene-based materials as adsorbents are also presented.

Emerging pollutants-Part II: Treatment

Emerging pollutants (EPs) refer to a class of pollutants, which are emerging in the environment or recently attracted attention. EPs mainly include pharmaceutical and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and antibiotic resistance genes (ARGs). EPs have potential threats to human health and ecological environment. In recent years, the continuous detections of EPs in surface and ground water have brought huge challenges to water treatment and also made the treatment of EPs become an international research hotspot. This paper summarizes some research results on EPs treatment published in 2019. This paper may be helpful to understand the current situations and development trends of EP treatment technologies.

Extensive solar light harvesting by integrating UPCL C-dots with Sn2Ta2O7/SnO2: Highly efficient photocatalytic degradation toward amoxicillin

The carbon dots (C-dots) mediated Sn₂Ta₂O₇/SnO₂ heterostructures with spongy structure were successfully assembled by simple hydrothermal route. The photocatalytic removal efficiency of amoxicillin (AMX, 20 mg L^-1) over C-dots/Sn₂Ta₂O₇/SnO₂ was estimated to reach up 88.3% within 120 min simulated solar light irradiating. Meanwhile, the HPLC-MS/MS analysis and density functional theory (DFT) computation were examined to clarify the photo-degradation pathway of AMX. The mechanism investigation proposed that with the modification of C-dots, the photocatalysts improves the utilization of solar energy by harvesting the long wavelength solar light due to their unique up-converted photoluminescence (UCPL). In addition, the porous spongy structure and plenty of tiny C-dots promote the ability of adsorption by enlarged specific surface area. Furthermore, the C-dots mediated Z-type heterojunction of Sn₂Ta₂O₇/SnO₂ facilitates the efficient separation and transfer of photo-induced carriers. Our work affords a promising approach for the design of the high-efficient photocatalysts to remedy poisonous antibiotics in aqueous environment.

Graphene Aerogels for In Situ Synthesis of Conductive Poly(para-phenylenediamine) Polymers, and Their Sensor Application

In this study, macroporous graphene aerogels (GAs) were synthesized by chemical reduction of graphene oxide sheets and were used as a support material for in situ synthesis of conductive poly(para-phenylenediamine) (p(p-PDA)). The in situ synthesis of p(p-PDA) in GA was carried out by using a simple oxidation polymerization technique. Moreover, the prepared conductive p(p-PDA) polymers in the networks of GAs were doped with various types of acids such as hydrochloric acid (HCl), nitric acid (HNO3), sulfuric acid (H2SO4), phosphoric acid (H3PO4), respectively. The prepared GA and different acid-doped forms as GA/p(p-PDA) composites were characterized by FT-IR, TGA, and conductivity measurements. The observed FT-IR peaks at 1574 cm-1, and 1491 cm-1, for stretching deformations of quinone and benzene, respectively, confirmed the in situ synthesis of P(p-PDA) polymers within GAs. The conductivity of GAs with 2.17 × 10-4 ± 3.15 × 10-5 S·cm-1 has experienced an approximately 250-fold increase to 5.16 × 10-2 ± 2.72 × 10-3 S·cm-1 after in situ synthesis of p(p-PDA) polymers and with HCl doping. Conductivity values for different types of acid-doped GA/p(p-PDA) composites were compared with the bare p(p-PDA) and their undoped forms. Moreover, the changes in the conductivity of GA and GA/p(p-PDA) composites upon CO2 gas exposure were compared and their sensory potential in terms of response and sensitivity, along with reusability in CO2 detection, were evaluated.