Adsorption of methylene blue and Cd(II) onto maleylated modified hydrochar from water

Synthesis of hydrochar from date palm seeds using microwave-enhanced hydrothermal carbonization and its application in dyes removal

This work reports new findings on the preparation of hydrochar from date palm (Phoenix dactylifera) seeds through the application of the microwave hydrothermal carbonization (HTC) method. Optimization investigations involving temperatures and reaction times were conducted to establish the highest yield, achieving a maximum yield of 60.87%. The prepared material was then impregnated in phosphoric acid and carbonized in the tube furnace at 550 °C for 1.5 h with a nitrogen flow of 50 CCM. The samples were characterized via scanning electron microscopy (SEM), Brunauer-Emmet-Teller (BET) and Fourier transform infrared (FTIR). The samples showed remarkable BET surface areas following activation, reaching up to 992 m2·g-1. The substance was subsequently used to absorb methylene blue with good fitting to the Freundlich and Redlich-Peterson isotherm and achieved a peak adsorption capacity of 196.6 ± 3.9 mg·g-1.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO2. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO2 into solid materials, achieving negative carbon emissions. Hydrothermal carbonization (HTC) presents an attractive method for converting biomass into carbon materials, by which biomass can be transformed into materials with favorable properties in a distinct hydrothermal environment, and these carbon materials have made extensive progress in many fields. However, the HTC of biomass is a complex and interdisciplinary problem, involving simultaneously the physical properties of the underlying biomass and sub/supercritical water, the chemical mechanisms of hydrothermal synthesis, diverse applications of resulting carbon materials, and the sustainability of the entire technological routes. This review starts with the analysis of biomass composition and distinctive characteristics of the hydrothermal environment. Then, the factors influencing the HTC of biomass, the reaction mechanism, and the properties of resulting carbon materials are discussed in depth, especially the different formation mechanisms of primary and secondary hydrochars. Furthermore, the application and sustainability of biomass-derived carbon materials are summarized, and some insights into future directions are provided.

A review: Hydrochar as potential adsorbents for wastewater treatment and CO2 adsorption

To valorize the biomass and organic waste, hydrothermal carbonization (HTC) stands out as a highly efficient and promising pathway given its intrinsic advantages over other thermochemical processes. Hydrochar, as the main product obtained from HTC, is widely applied as a fuel source and soil conditioner. Aside from these applications, hydrochar can be either directly used or modified as bio-adsorbents for environmental remediation. This potential arises from its tunable surface chemistry and its suitability to act as a precursor for activated or engineered carbon. In view of the importance of this topic, this review offers a thorough examination of the research progress for using hydrochar and its modified forms to remove organic dyes (cationic and anionic dyes), heavy metals, herbicides/pesticides, pharmaceuticals, and CO2. The review also sheds light on the fundamental chemistry involved in HTC of biomass and the major analytical techniques applied for understanding surface chemistry of hydrochar and modified hydrochar. The knowledge gaps and potential hurdles are identified to highlight the challenges and prospects of this research field with a summary of the key findings from this review. Overall, this article provides valuable insights and directives and pinpoints the areas meriting further investigation in the application potential of hydrochar in wastewater management and CO2 capture.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Synthesis of composites from activated carbon based on olive stones and sodium alginate for the removal of methylene blue

The present investigation involves the preparation of activated carbon (AC) from olive stones using a single-step activation process with potassium hydroxide (KOH) as an activating agent. The resulting activated carbon (AC) was used in conjunction with sodium alginate (Alg) to prepare the AC/Alg beads at different ratios (50/50, 60/40, and 80/20) for batch adsorption of methylene blue (MB). Characterization of the materials was conducted using FTIR, SEM, CHNS-O, and TGA-dTG thermal analysis. In batch adsorption studies, the AC/Alg beads were employed to remove MB from aqueous solutions, and various parameters, including contact time, initial pH of the MB solution, and initial MB concentration, were optimized to obtain maximum adsorption efficiency. The experimental results reveal that AC/Alg beads with a ratio of 60/40 exhibit the best adsorption performance. The pseudo-first-order kinetic model and the Langmuir adsorption isotherm, with a maximum adsorption capacity of 586 mg/g, best fit the experimental data.

Hydrochar-nanoparticle integration for arsenic removal from wastewater: Challenges, possible solutions, and future horizon

Arsenic (As) contamination poses a significant threat to human health, ecosystems, and agriculture, with levels ranging from 12 to 75% attributed to mine waste and stream sediments. This naturally element is abundant in Earth's crust and gets released into the environment through mining and rock processing, causing ≈363 million people to depend on As-contaminated groundwater. To combat this issue, introducing a sustainable hydrochar system has achieved a remarkable removal efficiency of over 92% for arsenic through adsorption. This comprehensive review presents an overview of As contamination in the environment, with a specific focus on its impact on drinking water and wastewater. It delves into the far-reaching effects of As on human health, ecosystems, aquatic systems, and agriculture, while also exploring the effectiveness of existing As treatment systems. Additionally, the study examines the potential of hydrochar as an efficient adsorbent for As removal from water/wastewater, along with other relevant adsorbents and biomass-based preparations of hydrochar. Notably, the fusion of hydrochar with nanoparticle-centric approaches presents a highly promising and environmentally friendly solution for achieving the removal of As from wastewater, exceeding >99% efficiency. This innovative approach holds immense potential for advancing the realms of green chemistry and environmental restoration. Various challenges associated with As contamination and treatment are highlighted, and proposed solutions are discussed. The review emphasizes the urgent need to advance treatment technologies, improve monitoring methods, and enhance regulatory frameworks. Looking outlook, the article underscores the importance of fostering research efforts, raising public awareness, and fostering interdisciplinary collaboration to address this critical environmental issue. Such efforts are vital for UN Sustainable Development Goals, especially clean water and sanitation (Goal 6) and climate action (Goal 13), crucial for global sustainability.

Trithiocyanurate-functionalized hydrochar for effectively removing methylene blue and Pb (II) cationic pollutants

Functionalization can change the physicochemical properties of hydrochar and improve its ability to adsorb pollutants. Herein, a trithiocyanurate-functionalized hydrochar (TTHC) was obtained from acylation of chloroacetyl chloride and hydrochar and modification with trithiocyanuric acid in alkaline conditions. TTHC can efficiently remove cationic methylene blue (MB) and Pb(II) from wastewater. The removal can be expressed with pseudo-second-order kinetic and Langmuir models. The MB and Pb(II) removed uptakes by TTHC at 298 K exceeded 909.9 and 182.8 mg g-1 respectively, and the removal rates reached 90% and 98% within 120 min respectively. Characterizations show TTHC is functionalized with trithiocyanurate, and rich in thiolate and aromaticity, and tends to adsorb MB/Pb(II) via multiple adsorption mechanisms. After five sorption-desorption regeneration cycles, TTHC maintained 80% and 99% adsorption capacities for MB and Pb(II) respectively. Therefore, TTHC is a promising efficient sorbent for removing MB and Pb(II) from effluents.

Adsorption of lead ions and methylene blue on acrylate-modified hydrochars

Hydrochars are promising sorbents for wastewater treatment. Herein, two acrylate-modified hydrochars (AMHC₁ and AMHC₂) were obtained by grafting acrylic acid on the surface of two hydrochars (MHC₁ and MHC₂ hydrothermally carbonized in water and acidic medium respectively) with free radical polymerization. Characterizations show that MHC₂ is more prone to free radical polymerization than MHC₁ does, and has higher carboxylate content after modification. The adsorption amounts of AMHC₂ over methylene blue (MB) and Pb(II) are much higher than those of AMHC₁. Pseudo-second-order kinetic and Langmuir isotherm equations well fit the Pb(II) and MB sorption data of AMHC₂. The Pb(II) adsorptive mechanism is mainly inner-surface complexation accompanied by ion exchange and cation-π interaction. MB adsorption involves ion exchange, electrostatic interaction, H-bonding and π-π interaction. Hence, the one-step modification method of free radical polymerization under alkaline condition has great potential for preparing carboxylate-modified hydrochars to adsorb cationic pollutants.

Exploitation of expired cellulose biopolymers as hydrochars for capturing emerging contaminants from water

Expired chemicals pose a potential environmental threat to humans and living organisms. Herein, we proposed a green approach whereby expired cellulose biopolymers were converted to hydrochar adsorbents and tested for removing the emerging pharmaceutical contaminants of fluoxetine hydrochloride and methylene blue from water. A thermally stable hydrochar was produced with an average particle size of 8.1 ± 1.94 nm and a mesoporous structure that exhibited a larger surface area than the expired cellulose by 6.1 times. The hydrochar was efficient in removing the two contaminants with efficiencies that reached above 90% under almost neutral pH conditions. Adsorption exhibited fast kinetics and regeneration of the adsorbent was successful. The adsorption mechanism was hypothesized in view of the Fourier Transform Infra-Red (FTIR) spectroscopy and pH effect measurements to be mainly electrostatic. A hydrochar/magnetite nanocomposite was also synthesized, and its adsorption behavior for both contaminants was tested and it revealed an enhanced percent removal relative to the bare hydrochar by 27.2% and 13.1% for FLX and MB, respectively. This work supports the strategies for zero waste management and the circular economy.

Microwave assisted and conventional hydrothermal treatment of waste seaweed: Comparison of hydrochar properties and energy efficiency

Waste seaweed is a valuable source for converting into value-added carbon materials. In this study, the production of hydrochar from waste seaweed was optimized for hydrothermal carbonization in a microwave process. The produced hydrochar was compared with hydrochar synthesized by the regular process using a conventional heating oven. The results show that hydrochar produced with a holding time of 1 h by microwave heating has similar properties to the hydrochar produced in a conventionally heated oven for 4 h (200 °C and water/biomass ratio 5): carbon mass fraction (52.4 ± 3.9 %), methylene blue adsorption capacity (40.2 ± 0.2 mg g^-1) and similar observations on surface functional groups and thermal stability were made between hydrochars produced by both methods. The analysis of energy consumption showed microwave assisted carbonization consume higher energy in compare to conventional oven. The present results suggest that hydrochar made from waste seaweed and using the microwave technique could be an energy-saving technology for producing hydrochar with similar specifications to hydrochar produced by conventional heating methods.

Methylene Blue Dye Adsorption on Iron Oxide-Hydrochar Composite Synthesized via a Facile Microwave-Assisted Hydrothermal Carbonization of Pomegranate Peels' Waste

The toxicity of dyes has a long-lasting negative impact on aquatic life. Adsorption is an inexpensive, simple, and straightforward technique for eliminating pollutants. One of the challenges facing adsorption is that it is hard to collect the adsorbents after the adsorption. Adding a magnetic property to the adsorbents makes it easier to collect the adsorbents. The current work reports the synthesis of an iron oxide-hydrochar composite (FHC) and an iron oxide-activated hydrochar composite (FAC) through the microwave-assisted hydrothermal carbonization (MHC) technique, which is known as a timesaving and energy-efficient method. The synthesized composites were characterized using various techniques, such as FT-IR, XRD, SEM, TEM, and N₂ isotherm. The prepared composites were applied in the adsorption of cationic methylene blue dye (MB). The composites were formed of crystalline iron oxide and amorphous hydrochar, with a porous structure for the hydrochar and a rod-like structure for the iron oxide. The pH of the point of zero charge (pHpzc) of the iron oxide-hydrochar composite and the iron oxide-activated hydrochar composite were 5.3 and 5.6, respectively. Approximately 556 mg and 50 mg of MB dye was adsorbed on the surface of 1 g of the FHC and FAC, respectively, according to the maximum adsorption capacity calculated using the Langmuir model.

Facile solvent-free radical polymerization to prepare itaconate-functionalized hydrochar for efficient sorption of methylene blue and Pb(II)

An itaconate-functionalized hydrochar (IFHC) was prepared from one-step solvent-free radical copolymerization of bamboo hydrochar, itaconic acid, ammonium persulphate and sodium hydroxide in solvent-free environment, and was employed to absorb methylene blue (MB) and Pb(II) from wastewater. Characterizations show IFHC has rich carboxylate and tends to adsorb cationic contaminants. The largest adsorbed quantities of MB and Pb(II) by IFHC are up to 1036 and 291.8 mg·g^-1 at 298 K respectively as per the Langmuir isotherm. Sorption of MB and Pb(II) onto IFHC can be expressed well by Langmuir isotherm and pseudo-2nd-order kinetics equations. The high sorption performance depends on the rich carboxylate, which can adsorb MB/Pb(II) through an electrostatic interaction/inner-surface complexation mechanism. The sorptive capacity of regenerated IFHC decreased below 10% after 5 desorption-resorption cycles. Thus, the solvent-free free radical copolymerization is an environmentally-friendly strategy to synthesize novel efficient sorbents that can clean cationic contaminants from wastewater.

Nitrated hydrochar reduce the Cd accumulation in rice and shift the microbial community in Cd contaminated soil

Rice grown on Cd-contaminated soil may accumulate Cd in grain, which is extremely harmful to human health. Several managements are developed to reduce the Cd load in rice, while in-situ immobilization by soil amendments has been attractive for its feasibility. Waste-derived hydrochar (HC) has been shown effective at immobilizing Cd in soil. However, potential plant negative effects and huge application amount are crucial to resolving in extensive application of HC. Nitric acid ageing may be an effective method to deal with these problems. In this paper, HC and nitrated hydrochar (NHC) were added to the Cd-contaminated soil at rates of 1% and 2% in a rice-soil column experiment. Results showed that NHC markedly promoted root biomass of rice by 58.70-72.78%, whereas HC had effects of 35.86-47.57%. Notably, NHC at 1% reduced the accumulation of Cd in rice grain, root and straw by 28.04%, 15.08% and 11.07%, respectively. A consistent decrease of 36.30% in soil EXC-Cd concentration was caused by NHC-1%. Following soil microbial community was shifted greatly under HC and NHC applications. The relative abundance of Acidobacteria was decreased by 62.57% in NHC-2% and by 56.89% in HC-1%. Nevertheless, Proteobacteria and Firmicutes were promoted by NHC addition. In contrast to HC, co-occurrence network of dominated bacteria was more complex and centralized generated by NHC. Key bacteria in that metabolic network of NHC such as Anaerolineae and Archangiaceae played key roles in Cd immobilization. These observations verified that NHC was more efficient to decrease Cd accumulation in rice and could alleviate the negative roles to plant by microbial changings in community composition and network. It could provide an enrichment of paddy soil microbial responds to the interaction of NHC with Cd and lay a foundation for the remediation of Cd-contaminated soil by NHC.

Directional regulation and mechanism analysis of the surface properties of hydrothermal carbon by circulating liquid in the hydrothermal carbonization procedure

The complexity of the chemistry behind the hydrothermal conversion is enormous. Components interact with their own physical and chemical structure, making it harsh to understand the conversion as a whole. Herein, the six-water recirculation and loading nano SiO₂ experiment in a one-pot hydrothermal carbonization procedure was designed to elucidate the mechanism of regulating the functional groups and microporous structure of the hydrochar surface. The hydrochar prepared by the second circulating liquid and loading nano-SiO₂ (HBC-R2/Si) was equipped most enriched functional groups (carboxyl = 11.48 μmol/g, phenolic hydroxyl = 52.98 μmol/g, lactone groups = 46.52 μmol/g) and suitable pore size (1.90 nm-1.93 nm) as a sorbent riched in hemicellulose. The sorption kinetics (equilibrium reached ≈ 480 min) are approximately evenly fitted by the pseudo-second-order, Weber and Morris, and Elovich models, indicating that membranes and particles diffusion, pore diffusion, and surface sorption coexisted in the sorption of methylene blue (MB) on the hydrochar materials. Simultaneously, all hydrochar materials achieved over 25% MB removal within 90 min (liquid membrane diffusion) and over 40% for HBC-R2 and HBC-R2/Si, suggesting that liquid membrane diffusion is the predominant rate-limiting step. Pearson's correlation analysis and Mantel's analysis announced that the cation exchange capacity (CEC), pore size, and carboxyl groups on the hemicellulose affect the sorption capacity by limiting the pore diffusion procedure. However, the CEC and the phenolic hydroxyl groups on the cellulose and hemicellulose affect the sorption rate by limiting membrane diffusion. Three consecutive sorption/desorption cycles confirmed the high stability and reusability of HBC-R2/Si composites.

Multiple roles of ferric chloride in preparing efficient magnetic hydrochar for sorption of methylene blue from water solutions

Highly efficient and cheap magnetic materials have application prospects in wastewater treatment. Herein, Fe₃O₄-loaded hydrochar (HC-Fe₃O₄) was obtained from hydrothermal carbonization (HTC) of bamboo with FeCl₃ and then added with FeCl₃ to form a magnetic sorbent via simple precipitation. The HC-Fe₃O₄ was characterized with various instruments. The characterizations show FeCl₃ plays at least two roles as a catalyst and an oxidant in HTC. The specific surface area of hydrochar enlarged from 39.9731 to 60.9887 m²·g^-1 after the addition of FeCl₃ during HTC, which showed FeCl₃ acted as a catalyst in HTC. XRD indicated Fe₃O₄ was formed by the structure of HC-Fe₃O₄, which indicated Fe(III) was reduced to Fe(II) during HTC. Sorption of methylene blue (MB) onto HC-Fe₃O₄ was better fitted by the Langmuir isotherm and pseudo-second-order kinetic models. Sorption is a spontaneous thermodynamic endothermic process and HC-Fe₃O₄ is easily separated by an applied magnetic field and reused.

Efficient Removal of Congo Red, Methylene Blue and Pb(II) by Hydrochar-MgAlLDH Nanocomposite: Synthesis, Performance and Mechanism

Organic dyes and heavy metals often coexist in industrial effluents, and their simultaneous removal is a grand challenge. Herein, a hydrochar and MgAl layered double hydroxide (HC-MgAlLDH) nanocomposite was prepared via a facile one-step hydrothermal route, and applied to remove anionic Congo red (CR), cationic Methylene blue (MB) and Pb(II) from aqueous solutions. The nanocomposite was formed by interweaving amorphous HC and crystalline MgAlLDH nanoplates and possessed more functional groups, lower zeta potential and larger specific surface area than uncomposited MgAlLDH. Batch removal experiments showed that the components HC and LDH dominated the CR and MB removals, respectively, whereas Pb(II) removal was conjointly controlled by the two components. The maximum Langmuir removal capacities of the nanocomposite to sole CR, MB, or Pb(II) were 348.78, 256.54 or 33.55 mg/g. In binary and ternary systems, the removal capacities of CR and MB only slightly decreased, while the capacity of Pb(II) increased by 41.13-88.61%. The increase was related to the coordination of Pb(II) with the sulfur-containing groups in dyes and the precipitation of PbSO₄. Therefore, the simultaneous removal of CR, MB and Pb(II) was involved in a synergistic effect, including electrostatic adsorption, π-π interaction, coordination and precipitation. The present work shows that the HC-MgAlLDH nanocomposite has great potential for wastewater integrative treatment.

Interactions between Cr(VI) and the hydrochar: The electron transfer routes, adsorption mechanisms, and the accelerating effects of wood vinegar

Conversion of the low-valued invasive plant biomass into high-grade carbonaceous materials may provide a novel strategy to tackle the global issues of climate changes and exotic plant invasion. In this study, the hydrochar was fabricated from the biomass of Eupatorium adenophorum spreng. via hydrothermal carbonization (HTC) process to remove Cr(VI). The adsorption thermodynamics and kinetics were investigated via batch experiments, and the electron transfer routes and adsorption mechanisms were further revealed based on systematic characterization. The adsorption isotherms were well fitted by the Langmuir model with a maximum adsorption amount of 7.76 mg/g. The adsorption was spontaneous, and the surface adsorption and intraparticle diffusion may be the speed-limiting steps. Both -OH group and furan structures may donate the electrons to reduce Cr(VI), and the adsorption was governed by the surface complexation with the oxygen-containing functional groups including hydroxyl and carboxyl. Furthermore, the wood vinegar, as the by-product, can significantly accelerate the reduction rate of Cr(VI). Thus, this study provided a new strategy to fabricate carbonaceous materials which may facilitate to boost the carbon neutrality and control of invasive plants.

Biomass-Based Hydrothermal Carbons for the Contaminants Removal of Wastewater: A Mini-Review

The preparation of adsorbents with eco-friendly and high-efficiency characteristics is an important approach for pollutant removal, and can relieve the pressure of water shortage and environmental pollution. In recent studies, much attention has been paid to the potential of hydrothermal carbonization (HTC) from biomass, such as cellulose, hemicellulose, lignin, and agricultural waste for the preparation of adsorbents. Hereby, this paper summarizes the state of research on carbon adsorbents developed from various sources with HTC. The reaction mechanism of HTC, the different products, the modification of hydrochar to obtain activated carbon, and the treatment of heavy metal pollution and organic dyes from wastewater are reviewed. The maximum adsorption capacity of carbon from different biomass sources was also evaluated.

MOF@biomass hybrids: Trends on advanced functional materials for adsorption

This contribution aims to demonstrate the scope of new hybrids between biomass and metal-organic frameworks (MOF@biomass) used in the adsorption process of pollutants. After a brief presentation of the use of the main series of MOFs as efficient adsorbents for different types of pollutants, the limitations of these structures related to particle size and hydrodynamic problems during their application are highlighted. Lignocellulosic biomasses are also recognized as an alternative adsorbent, mainly due to their high natural abundance and their low environmental impact during and after their application. The limited capacity of bioadsorbents becomes important in this research. Consequently, the largest amount of information existing in the last ten years on MOF-Biomass functionalization as a hybrid and improvement technology for adsorption processes is compiled, analyzed, compared and contrasted. So far, there is no evidence of works that exploit the concept of functionalization of adsorbents of different nature to give rise to new hybrid materials. Through this review it was found that the hybrids obtained show a higher adsorption capacity (Qe) compared to their precursors, due to the increase of organic functional groups provided by the biomass. Thus, for heavy metals, dyes, Arsenium anions and other organic and pharmaceutical compounds, there are increases in Qe of about 100 mg g^-1. The possibility of the new hybrid being studied for desorption and reuse processes is also raised, resulting in a new line of research that is attractive for the industry from an economic and environmental point of view. The functionalization methods and techniques used in the studies cited in this article are outlined. In conclusion, this research brings a new horizon of study in the field of adsorption and mentions the main future challenges related to new sustainable applications.

Effects of hydrophobic coating on properties of hydrochar produced at different temperatures: Specific surface area and oxygen-containing functional groups

Hydrochar's specific surface area (SSA) is important in environmental remediation; however, a hydrophobic coating formed on hydrochar creates a physical barrier that reduces that SSA. The formation and composition of the hydrophobic coating and its effects on hydrochar properties are unclear. In this study, hydrochar was produced from Chinese fan palm (Livistona chinensis) leaves at different temperatures. The resulting hydrophobic coatings were investigated by in situ characterization and then extracted with acetone for composition identification. Additionally, hydrochar properties were compared before and after hydrophobic coating removal. The results showed that the hydrophobic coating of the hydrochar produced at 180 °C was the insoluble cuticle layer of raw biomass, while the hydrophobic coatings formed above 180 °C were the depolymerization products of cutin. For the hydrochar above 180 °C, especially at 260 °C, the removal of the hydrophobic coating from hydrochar increased both its SSA and its oxygen-containing functional groups.

Pyrolysis of exhausted hydrochar sorbent for cadmium separation and biochar regeneration

Sorption is considered a cost-effective technique for cadmium (Cd) removal from water, while the exhausted Cd-enriched sorbent should be properly disposed of. In this study, pyrolysis of exhausted hydrochar sorbent was conducted at 300-900 °C, and the behavior of Cd and the physicochemical properties and environmental applications of the regenerated biochar were investigated. The vaporization of adsorbed Cd in hydrochar was greatly enhanced by elevating pyrolysis temperature, and almost no Cd was observed in the regenerated biochars obtained at 700-900 °C. In comparison with the raw hydrochar, the regenerated biochars showed higher pH, ash content, and carbon content, while the contents of hydrogen and oxygen decreased. According to the toxicity characteristic leaching procedure result, the toxicity and mobility of Cd in hydrochar were greatly reduced after pyrolysis. Notably, the regenerated biochar showed much higher Cd sorption capacity (26.05-30.24 mg/g) than the raw hydrochar (6.70 mg/g). Surface complexation with oxygen-containing functional groups was the dominant Cd sorption mechanism for hydrochar, and precipitation between Cd²⁺ and carbonates dominated the Cd removal by the regenerated biochars. These results illuminated that pyrolysis can be an effective technique for the harmless disposal of exhausted hydrochar sorbent and the regeneration of valuable biochar.

Synthesis of polyaminophosphonated-functionalized hydrochar for efficient sorption of Pb(II)

Surface modification can effectively improve the ability of hydrochar to capture pollutants from wastewater. In this work, polyaminophosphonated-functionalized hydrochar (PAP-HC) was successfully synthesized by a chemical grafting approach and applied efficiently to adsorb aqueous Pb(II). Properties of PAP-HC were characterized by ICP, FTIR, XPS, SEM-EDS, elemental analysis, zeta potential, and BET. The Pb(II) adsorbing behavior of PAP-HC was tested by batch adsorbing assays, including the pH impact, uptake kinetics, sorption isotherms, sorption thermodynamics, and PAP-HC recycling. Sorption isotherms were better illustrated by a Langmuir equation, while the kinetic profile was modeled by a pseudo-second-order equation. Adsorption of Pb(II) onto PAP-HC mainly relied on chelating Pb(II) with aminophosphonate groups of PAP-HC by XPS and FTIR analyses. The actual adsorbed amount of PAP-HC maximized to 179.92 mg·g^-1 at 298 K, which showed high adsorption ability. Nitric acid and hydroxide solutions were suitable for desorption of adsorbed Pb(II) and activated PAP-HC, respectively. PAP-HC can be reused for at least five cycles without obvious change in adsorption performance. The results suggest PAP-HC is a prospective adsorbent to capture Pb(II) from wastewater.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Microwave-Assisted Hydrothermal Carbonization of Pomegranate Peels into Hydrochar for Environmental Applications

Several studies have reported that the hydrothermal carbonization method (HTC) of agricultural waste is able to produce a solid residue with interesting properties for the adsorption of organic pollutants from contaminated water. This work represents a facile method to prepare hydrochar (HC) from pomegranate peels’ waste using the microwave-assisted hydrothermal carbonization method (MHTC) at 200 °C for 1 h with a mass ratio of peel to water = 1:10. Activated hydrochar (AHC) was prepared by in situ chemical activation using ZnCl2 and MHTC. Several techniques have been applied to characterize the prepared samples as FTIR, XRD, TEM and SEM. The samples were investigated for their possible use as adsorbents of methylene blue (MB) dye. The results confirm the formation of amorphous hydrochar with a porous structure. The pH of zero point charge (pHzpc) is 4.3 and 4.6 for HC and AHC samples, respectively. The maximum adsorption capacity of HC and AHC samples are 194.9 and 12.55 mg/g (i.e., mg of adsorbate/g of adsorbent), respectively.

Simultaneous co-hydrothermal carbonization and chemical activation of food wastes to develop hydrochar for aquatic environmental remediation

Locally generated food wastes, such as Arabic coffee ground (ACG) and olive oil cake (OOC) were converted to N-ACG: OOC - 3 hydrochar (HC) through simultaneous co-hydrothermal carbonization (Co-HTC) and chemical activation. The optimized ACG: OOC mass ratio (g: g) and chemical activation agent used were 1.2: 0.8 and 0.1 M HNO₃, respectively. Spectroscopic analyses confirmed the dominance of oxygen-containing functionalities, whereas the X-ray diffraction pattern displayed peaks for both sucrose and cellulose on N-ACG: OOC - 3. The developed HC was tested for methylene blue (MB) and crystal violet (CV) adsorption in aqueous systems. Batch scale adsorption studies showed pH, initial concentration (C_o), time (t), and temperature (T) dependent dye uptake. Maximum dye uptake was observed at pH 7, with 50 - 70% and 76 - 90 % CV and MB removal achieved within 15 min at varied C_o: 50 - 200 mg/L. Adsorption was governed by multiple mechanisms, including hydrogen bonding, electrostatic interactions, π-π interactions, and n-π interactions. Dye elution was higher in ethanol (EtOH: C₂H₅OH), and CV elution (50.8%) was more significant than MB elution (14.8%).

Enhanced removal of Cr(VI) by cation functionalized bamboo hydrochar

Chemical modification on hydrochars can significantly improve their ability of removing heavy metal ions from wastewater, but so far no research has focused on the chemical modification through free radical reaction. In this work, a cation functionalized hydrochar (CFHC) bearing - N⁺H₂R was synthesized by grafting-polymerization of glycidyl methacrylate (GMA) onto bamboo hydrochar under initiation by benzoyl peroxide, followed by the amination with the introduced epoxy group and diethylenetriamine and a subsequent hydrochloric acid treatment. The resulted CFHC exhibited a superior removal capacity of 424.09 mg·g^-1 for Cr(VI), and the highest sorption occurred at pH of 2. Combining a series of characterizations and tests, it was concluded that the sorption conformed to the pseudo-second-order and Freundlich equations, indicating a multilayer chemisorption process that mainly driven by electrostatic reaction, reduction, and surface complexation. This research proved that a free radical polymerization treatment could effectively transform hydrochars into super adsorbents for wastewater treatment.

Efficient adsorption of methylene blue on carboxylate-rich hydrochar prepared by one-step hydrothermal carbonization of bamboo and acrylic acid with ammonium persulphate

Hydrochar (AAHC) with rich carboxylate groups was prepared by one-step hydrothermal carbonization (HTC) of bamboo and acrylic acid with the presence of ammonium persulphate, and then activated by a sodium hydroxide solution. AAHC was featured by elemental analysis, SEM, XPS, FTIR, Zeta potential analysis and N₂ adsorption-desorption isotherms, and applied to test adsorptive ability of methylene blue (MB) by batch sorption experiments. Despite a small Brunauer-Emmett-Teller (BET) surface area of 5.03 m²·g^-1, AAHC has excellent MB adsorbing capacity owing to the richness of carboxylate groups. Compared with hydrochar produced without adding ammonium persulphate, AAHC exhibits larger BET surface, pore volume and carboxylate groups, indicating a small amount of ammonium persulfate plays an important role in HTC in addition to the free radical initiator. This work provides a facile and cheap method combining HTC and polymerization for preparation of carboxylate-rich hydrochar.

A high-performance polymer hydrogel derived from konjac flying powder for removal of heavy metals

Agricultural byproducts have excellent potential for pollutant remediation due to the low-cost and environmental sustainability.

Efficient removal of methylene blue by activated hydrochar prepared by hydrothermal carbonization and NaOH activation of sugarcane bagasse and phosphoric acid

Activated-hydrochar (AHC) derived from sugarcane bagasse was synthesized by hydrothermal carbonization (HTC) using phosphoric acid and sodium hydroxide (NaOH) as activators.

Enhanced removal of ibuprofen by heterogeneous photo-Fenton-like process over sludge-based Fe3O4-MnO2 catalysts

Heterogeneous photo-Fenton-like catalysts with low cost, little hazard, high effectiveness and facile separation from aqueous solution were highly desirable. In this study, sludge-based catalysts combining nano Fe₃O₄-MnO₂ and sludge activated carbon were successfully synthesized by high-temperature calcination method and then characterized. These synthetic materials were applied to remove ibuprofen in the heterogeneous photo-Fenton process. The preparation conditions of sludge-based catalysts optimized by orthogonal experiments were 2.0 M of ZnCl₂, a temperature of 500 °C, a pyrolysis time of 60 min, and a sludge ratio: Fe₃O₄-MnO₂ of 25:2. In batch experiments, the optimal experimental conditions were determined as catalyst dosage of 0.4 g·L^-1, hydrogen peroxide concentration of 3.0 mL·L^-1, pH value of 3.3, and contact time of 2.5 h. The degradation rate sludge/Fe₃O₄-MnO₂ catalyst to ibuprofen is up to 95%. The removal process of ibuprofen fitted the pseudo-second-order kinetic model, and the photocatalytic degradation process was the main factor controlling the reaction rate. The catalytic mechanism was proposed according to the Fourier transform infrared analysis and mass spectrometry product analysis; it was mainly attributed to the interaction between hydroxyl groups and benzene rings.

Characterization of Bio-Adsorbents Produced by Hydrothermal Carbonization of Corn Stover: Application on the Adsorption of Acetic Acid from Aqueous Solutions

In this work, the influence of temperature on textural, morphological, and crystalline characterization of bio-adsorbents produced by hydrothermal carbonization (HTC) of corn stover was systematically investigated. HTC was conducted at 175, 200, 225, and 250 °C, 240 min, heating rate of 2.0 °C/min, and biomass-to-H2O proportion of 1:10, using a reactor of 18.927 L. The textural, morphological, crystalline, and elemental characterization of hydro-chars was analyzed by TG/DTG/DTA, SEM, EDX, XRD, BET, and elemental analysis. With increasing process temperature, the carbon content increased and that of oxygen and hydrogen diminished, as indicated by elemental analysis (C, N, H, and S). TG/DTG analysis showed that higher temperatures favor the thermal stability of hydro-chars. The hydro-char obtained at 250 °C presented the highest thermal stability. SEM images of hydro-chars obtained at 175 and 200 °C indicated a rigid and well-organized fiber structure, demonstrating that temperature had almost no effect on the biomass structure. On the other hand, SEM images of hydro-chars obtained at 225 and 250 °C indicated that hydro-char structure consists of agglomerated micro-spheres and heterogeneous structures with nonuniform geometry (fragmentation), indicating that cellulose and hemi-cellulose were decomposed. EDX analysis showed that carbon content of hydro-chars increases and that of oxygen diminish, as process temperature increases. The diffractograms (XRD) identified the occurrence of peaks of higher intensity of graphite (C) as the temperature increased, as well as a decrease of peaks intensity for crystalline cellulose, demonstrating that higher temperatures favor the formation of crystalline-phase graphite (C). The BET analysis showed 4.35 m2/g surface area, pore volume of 0.0186 cm3/g, and average pore width of 17.08 μm. The solid phase product (bio-adsorbent) obtained by hydrothermal processing of corn stover at 250 °C, 240 min, and biomass/H2O proportion of 1:10, was activated chemically with 2.0 M NaOH and 2.0 M HCl solutions to investigate the adsorption of CH3COOH. The influence of initial acetic acid concentrations (1.0, 2.0, 3.0, and 4.0 mg/mL) was investigated. The kinetics of adsorption were investigated at different times (30, 60, 120, 240, 480, and 960 s). The adsorption isotherms showed that chemically activated hydro-chars were able to recover acetic acid from aqueous solutions. In addition, activation of hydro-char with NaOH was more effective than that with HCl.

Enhanced removal of Cr(VI) by nitrogen-doped hydrochar prepared from bamboo and ammonium chloride

N-doped biochar can effectively eliminate toxic Cr(VI). Here, N-doped hydrochar (NHC) was successfully synthesized by one-pot hydrothermal carbonization (HTC) of NH₄Cl and bamboo, and employed to adsorb Cr(VI). The specific surface area, pore volume, and carbon and nitrogen contents of NHC all increase compared with the undoped hydrochar (HC). NH₄Cl acts as a cheap nitrogen source to enhance the nitrogen content of hydrochar and as an acid catalyst to accelerate hydrochar carbonization. Adsorption experiments show NHC has higher adsorption capacity than HC for Cr(VI). XPS and FTIR imply the dominant mechanisms of adsorbing Cr(VI) onto two hydrochars are electrostatic attraction, reduction and complexation, but the contributions of surface functional groups in two hydrochars for elimination of Cr(VI) differ. The doped nitrogen in NHC is pivotal in adsorbing and reducing Cr(VI). Hence, NHC prepared from bamboo and NH₄Cl by one-step HTC is a cheap and efficient adsorbent to eliminate aqueous Cr(VI).

Hydrothermal carbonization of distillers grains with clay minerals for enhanced adsorption of phosphate and methylene blue

A novel one-pot synthesis method was developed to prepare modified hydrochar by co-hydrothermal carbonization of waste distillers grains using low-cost clay minerals (attapulgite or vermiculite). The loading of the clay minerals onto hydrochar surfaces altered the structure and surface composition of the hydrochar such that the clay-modified hydrochars showed better ability to adsorb methylene blue and phosphate in aqueous solution than the pristine hydrochar. The maximum methylene blue and phosphate adsorption capacities of the modified hydrochar reached 340.3 and 96.9 mg g^-1, respectively, comparable or higher than that of many commercial sorbents. Multiple mechanisms, including electrostatic attraction, ion exchange, complexation, and physical adsorption, controlled the adsorption process. These results highlight excellent potential for distillers grains-derived hydrochar-clay composites as an environmental sorbent, capable of removing a variety of contaminants from aqueous solutions.

Tuning oxygenated functional groups on biochar for water pollution control: A critical review

Biochar has attracted increasing attention in water pollution control, attributed to its various merits, e.g., tunable physico-chemical properties. The oxygenated functional groups (OFGs) on biochar are key active sites for removing pollutants from water through interfacial adsorption/redox reaction. However, there is still a lack of comprehensive knowledge and perspective on tuning OFGs on biochar for enhanced performance in water pollution control. Here, this review highlighted the mechanisms of biochar OFGs in water pollution control, analyzed the strategies and mechanisms for tuning OFGs on biochar, and investigated the performances of biochars with tuned OFGs in removing inorganic/organic pollutants via adsorption/redox reactions. Specifically, strategies for tuning OFGs on biochar are far more than the well-recognized ex-situ oxidation of pristine biochar. These strategies include in-situ low temperature preservation of hydroxyl and carboxyl, in-/ex-situ oxidation of biochar, and in-/ex-situ grafting of carboxyl on biochar via cycloaddition/acylation reaction. The resultant biochars showed enhanced performances in adsorption (mainly mediated by hydroxyl, carboxyl and ketone through surface complexation, H-bonding, and electrostatic attraction) and redox reaction (mainly mediated by redox-active hydroxyl and ketone). Finally, this review presented future directions on developing biochar with specially tuned surface OFGs as a sustainable high-performance adsorbent/carbocatalyst for water pollution control.

Chemical aging of hydrochar improves the Cd2+ adsorption capacity from aqueous solution

Hydrochar (HC) serves as a promising adsorbent to remove the cadmium from aqueous solution due to porous structure. The chemical aging method is an efficient and easy-operated approach to improve the adsorption capacity of HC. In this study, four chemical aging hydrochars (CAHCs) were obtained by using nitric acid (HNO₃) with mass fractions of 5% (N5-HC), 10% (N10-HC), and 15% (N15-HC) to age the pristine HC (N0-HC) and remove the Cd²⁺ from the aqueous solution. The results displayed that the N15-HC adsorption capacity was 19.99 mg g^-1 (initial Cd²⁺ concentration was 50 mg L^-1), which increased by 7.4 folds compared to N0-HC. After chemical aging, the specific surface area and oxygen-containing functional groups of CAHCs were increased, which contributed to combination with Cd²⁺ by physical adsorption and surface complexation. Moreover, ion exchange also occurred during the adsorption process of Cd²⁺. These findings have important implications for wastewater treatment to transform the forestry waste into a valuable adsorbent for Cd²⁺ removal from water.

Preparation of hydrochar with high adsorption performance for methylene blue by co-hydrothermal carbonization of polyvinyl chloride and bamboo

Polyvinyl chloride (PVC) was blended into bamboo powder during co-hydrothermal carbonization (Co-HTC) to understand the effects on the physicochemical properties and adsorbing ability of hydrochar. The properties of hydrochar were characterized by Zeta potential, elemental analyses, BET, FTIR, XPS, Boehm titration and SEM. The addition of PVC into bamboo in Co-HTC decreased the BET area, and pore volume and radius of hydrochar, but increased the contents of surface hydroxyl and carboxyl groups. The adsorption ability of hydrochar produced by addition of PVC at 473 K over methylene blue (MB) increased significantly. The main adsorption mechanism was electrostatic attraction by -N(CH₃)₂⁺ of MB and carboxylate of hydrochar, and hydrogen-bonding interaction through N atom of phenothiazine in MB and C-OH of hydrochar. Thus, Co-HTC offers a facile, green and economical alternative for conversion of waste into high-value adsorbents.

Investigation of organic impurity and its occurrence in industrial waste salt produced by physicochemical process

Industrial waste salt is classified as hazardous waste to the environment. The organic impurity and its occurrence in industrial waste salt affect the salt resource utilization. In this paper, composition quantitative analysis, XRD, TG-DSC, SEM/FIB-SEM coupled with EDS, FTIR, XPS and GC-Ms were chosen to investigate the organic impurity and its occurrence in industrial waste salt. The organic impurities owe small proportion (1.77%) in the specimen and exhibit weak thermal stability within the temperature of 600°C. A clear definition of organic impurity, including 11 kinds of organic compounds, including aldehyde, benzene and its derivatives etc., were detected in the industrial waste salt. These organic impurities, owing (C-O/C-O-C, C-OH/C = O, C–C/CH_x/C = C etc.)-containing function group substance, are mainly distributed both on the surface and inside of the salt particles. Meanwhile, the organic substance may combine with metal cations (Ni²⁺, Mg²⁺, Cu²⁺ etc.) through functional groups, such as hydroxide, carbonyl etc., which increases its stability in the industrial waste salt. These findings provide comprehensive information for the resource utilization of industrial waste salt from chemical industry etc.

Optimization and mechanisms of methylene blue removal by foxtail millet shell from aqueous water and reuse in biosorption of Pb(II), Cd(II), Cu(II), and Zn(II) for secondary times

Foxtail millet shell as a raw efficient adsorbent was chosen first to eliminate methylene blue (MB) based on the uneven surface with many micropores, lots of negative charges, various functional groups, and some primary elements. And then the adsorbent-loaded MB was used to remove Pb(II), Cd(II), Cu(II), and Zn(II) from aqueous water for secondary adsorption. The effects of various factors were explored and optimized for removal rates of MB on the surface of the adsorbent using response surface methodology (RSM). After these factors were optimized, the confirmed removal rates of MB by the adsorbents were reached at 92.04, 93.05, and 93.36%, respectively from aqueous water while the solution pH was at 3, 7, and 11, respectively. The behavior of adsorption for MB dye was well-described by Langmuir isotherm (R² = 0.9951), demonstrating favorable monolayer adsorption of MB on the adsorbent with the maximum capacity of 165.07 mg·L^-1 in aqueous water. The data of MB dye removal was better assessed by pseudo-second-order model (R² ≥ 0.9033), indicating an exchange of electrons has occurred between the adsorbent and MB particles, especially K and Ca ions of the adsorbent. In addition, the adsorbent-loaded MB has still presented better adsorption abilities for Pb(II), Cd(II), Cu(II), and Zn(II), respectively after MB removal in aqueous water. The adsorption mechanisms of adsorption were explored with the characterizations of the adsorbent before and after adsorption for the target pollutants by the methods of TEM, SEM, nitrogen physisorption isotherms, XPS, EDS, IR, and zeta potential classes. In summary, the results presented that the foxtail millet shell could be applied to remove MB dye effectively from aqueous water with the combined effects of electrostatic attraction, ion exchange, functional groups binding, and pore diffusion, but also, the adsorbent loaded with MB can be still applied to eliminate Pb(II), Cd(II), Cu(II), and Zn(II) by effects of electrostatic attraction and functional groups complexation in aqueous water.Novelty Statement In the present work, (a) the raw foxtail millet shell as a new potential adsorbent was used to remove MB dye from aqueous water for the first times, and operational variables of adsorption MB were investigated and optimized using response surface methodology, (b) the foxtail millet shell loaded MB as a disused adsorbent without any chemical reagent added was carried out to remove Pb(II), Cd(II), Cu(II), and Zn(II) ions, respectively in aqueous water for a secondary cycle, (c) adsorption mechanisms of MB removal on the adsorbent and the target heavy metals on the disused adsorbent were explored by the various analytical methods. This work provides evidence for the adsorption of MB on the natural adsorbent and improves the utilization efficiency of the used adsorbent on Pb(II), Cd(II), Cu(II), and Zn(II) removal in aqueous water.

Super and Selective Adsorption of Cationic Dyes onto Carboxylate-Modified Passion Fruit Peel Biosorbent

The carboxylate-functionalized passion fruit peel (PFPCS) was an efficient and rapid biosorbent for wastewater treatment. The PFPCS exhibited excellent selectivity to the cationic dyes, where the maximum adsorption capacities for methylene blue (MB) and methyl violet (MV) were 1,775.76 mg g-1 and 3,756.33 mg g-1, respectively. And the adsorption process of MB and MV on PFPCS reached equilibrium within 20 min. Moreover, the adsorption conditions and mechanisms were investigated. The adsorption process was in good agreement with the pseudo-second-order and Langmuir isotherm models. The adsorption mechanism was also proposed to be electrostatic interaction and hydrogen bond. After six cycles of desorption-adsorption, the removal efficient of MB and MV could be kept above 95%. Thus, PFPCS was considered as a highly efficient absorbent for removing cationic dyes from polluted water due to excellent adsorption characteristics, low cost and environmental friendliness.