Effect of biochars on bioaccumulation and human health risks of potentially toxic elements in wheat (Triticum aestivum L.) cultivated on industrially contaminated soil

Effect of biochar, zeolite and bentonite on physiological and biochemical parameters and lead and zinc uptake by maize (Zea mays L.) plants grown in contaminated soil

Heavy metals (HMs) are common contaminants with major concern of severe environmental and health problems. This study evaluated the effects of organo-mineral amendments (mesquite biochar (MB), zeolite (ZL) and bentonite (BN) alone and in combination) applied at different rates to promote the maize (Zea mays L.) growth by providing essential nutrient and improving the soil physio-chemical properties under zinc (Zn) and lead (Pb) contamination. Result revealed that the incorporation of organo-mineral amendments had significantly alleviated Pb and Zn contamination by maize plants and improved the physiological and biochemical attributes of plants. Combined application of organo-mineral amendments including BMA-1, BMA-2 and BMA-3 performed excellently in terms of reducing Pb and Zn concentrations in both leaves (19-60%, 43-75%, respectively) and roots (24-59%, 42-68%, respectively) of maize. The amendments decreased the extractable, reducible, oxidisable and residual fractions of metals in soil and significantly reduced the soil DTPA-extractable Pb and Zn. BMA-1 substantially improved antioxidant enzyme activities in metal-stressed plants. This study indicated that combined use of organo-mineral amendments can effectively reduce the bioavailability and mobility of Pb and Zn in co-contaminated soils. Combined application of organo-mineral amendments could be viable remediation technology for immobilization and metal uptake by plants in polluted soils.

Combined effects of biochar and biodegradable mulch film on chromium bioavailability and the agronomic characteristics of tobacco

Biochar (BC) and biodegradable mulch film (BMF) are both commonly used means of production in agriculture. In recent years, most studies have focused on the effects of BC or BMF on soil heavy metal pollution, while they have neglected the combined effects. In this study, a pot experiment was conducted to examine the impacts of BMF, BC, and combined BMF and BC (CMB) on the mobility of chromium (Cr) and the agronomic characteristics of flue-cured tobacco. Compared with the control, BMF, BC, and CMB significantly reduced the concentrations of diethylenetriamine pentaacetic acid (DTPA) extractable Cr in soils by 29.07-29.75%, 45.35-48.54%, and 34.21-37.92%, respectively. In comparison to the application of BMF and BC alone, co-application reduced the availability of Cr in soil via increasing the adsorption of soil Cr and soil enzyme activity, which resulted in the decrease of Cr content and bioconcentration factor and in plants. Moreover, the combined application increased the plant height, stem diameter, leaf area, total root area, root tip number, and root activity of tobacco, which leaded to increase in leaf and root biomass by 11.40-67.01% and 23.91-50.74%, respectively. Therefore, the application of CMB can reduce the heavy metal residues in tobacco leaves and improve tobacco yield and quality.

Assessment of heavy metal distribution and bioaccumulation in soil and plants near coal mining areas: implications for environmental pollution and health risks

Monitoring heavy metals (HMs) across source distance and depth distribution near coal mining sites is essential for preventing environmental pollution and health risks. This study investigated the distribution of selected HMs, cadmium (Cd2+), chromium (Cr2+), copper (Cu2+), manganese (Mn2+), nickel (Ni2+), lead (Pb2+), and zinc (Zn2+), in soil samples collected from ten sites (S-1-S-10) at two different depths (0-15 and 15-30 cm) and distances of 50, 100, and 200 m from a mining source. Additionally, three plant species, Prosopis spp., Justicia spp., and wheat, were collected to assess HM bioavailability and leaf accumulation. Coal mine activities' impact on soil properties and their HM associations were also explored. Results reveal HM concentrations except for Cr2+ exceeding World Health Organization (WHO) limits. In surface soil, Cd2+ (58%), Cu2+ (93%), Mn2+ (68%), Ni2+ (80%), Pb2+ (35%), and Zn2+ (88%) surpassed permissible limits. Subsurface soil also exhibited elevated Cd2+ (53%), Cu2+ (83%), Mn2+ (60%), Ni2+ (80%), Pb2+ (35%), and Zn2+ (77%). Plant species displayed varying HM levels, exceeding permissible limits, with average concentrations of 1.4, 1.34, 1.42, 4.1, 2.74, 2.0, and 1.98 mg kg-1 for Cd2+, Pb2+, Cr2+, Cu2+, Mn2+, Ni2+, and Zn2+, respectively. Bioaccumulation factors were highest in wheat, Prosopis spp., and Justicia spp. Source distance and depth distribution significantly influenced soil pH, electrical conductivity (EC), and soil organic carbon (SOC). Soil pH and EC increased with an increase in soil depth, while SOC decreased. Pearson correlation analysis revealed varying relationships between soil properties and HMs, showing a considerably negative correlation. Concentrations of HMs decreased with increasing depth and distance from mining activities, validated by regression analysis. Findings suggest crops from these soils may pose health risks for consumption.

Ecological and contamination assessment of soil in the region of coal-fired thermal power plant

This study was carried out to determine the heavy metal pollution and possible sources of agricultural soils in Tavşanlı district, Which energy power plant is located. Total 83 soil samples were taken and 8 (Cu, Cr, Pb, Co, Fe, Mn, Ni, and Zn) heavy metals were analyzed in soil samples The mean concentration of heavy metals were determined as Cu (32.89 mg kg-1), Cr (285.69 mg kg-1), Co (36.37 mg kg-1), Mn (860.20 mg kg-1), Ni (457.59 mg kg-1), Pb (22.14 mg kg-1), Fe (30,250 mg kg-1) and Zn (65.05 mg kg-1), were determined. The mean concentrations of Cu, Cr Co, Mn and Ni found to be higher than both the upper continental crust values and the European soil mean values. Contamination factor Co (2.1), Cr (3.10) and Ni (9.73), enrichment factor Co (2.73), Cr (3.75) and Ni (11.42) and geoaccumulation index Co (0.18), Cr (0.50) and Ni (1.98) values showed that the soils were polluted by Co, Cr, and Ni. In addition, it was determined that Ni (48.65) poses a "moderate ecological risk" in the study area. Pearson correlation anaysis and principal component analysis determined that Cr, Co and Ni have both lithogenic and anthropogenic origin.

Potential Development of Biochar in Africa as an Adaptation Strategy to Climate Change Impact on Agriculture

One of the most important obstacles to increasing agricultural production yields worldwide, especially in developing economies such as those in Africa is the continued degradation of soils due to climate change. In response to this threat, one of the strategies advocated is biochar technology, which is one of the emerging sustainable and climate-friendly soil amendments. This article reviews a brief description of biochar, the advantages and disadvantages of its use, and the prospects for developing its potential impact on agricultural productivity in African countries with a case study in Burkina Faso. Biochar is mainly useful for soil carbon sequestration, increasing and maintaining soil fertility, environmental management, and as a renewable energy source. However, it can have secondary effects including negative impacts on human health, pollution, and water quality. Furthermore, the positive results of biochar use in Africa suggest a prospect for ensuring the feasibility of biochar technology in policy decisions as a sustainable alternative to agricultural land management in the combat against climate change. As recommendations, a combination of improved seed varieties, and SWC (Soil and Water Conservation) techniques with the application of Biochar will be a perfect innovation for an intelligent adaptation practice to the destructive action of climate change in agriculture.

Tea-based biochar-mediated changes in cation diffusion homeostasis in rice grown in heavy metal (loid) contaminated mining soil

Foreseeable future scenarios highlight the urgency of applying eco-safe avoidance methods or tolerance to heavy metal(loid) (HM) stress in agricultural production areas of contamination. The analyses show that the Ni, Mn, As, and Cr concentrations detected in the soils of the paddy fields in the Black Sea region vary between 123.60 and 263.30; 687-1271; 8.90-14.50; 162.00-340.00 mg kg-1 proving high accumulation of Ni, Mn, As, Cr in rice. Overconsumption of rice farmed extensively on these soils might also lead to human HM-related health problems. Therefore, in the current study, the approach of using tea-based biochar (BC) proven to have one of the most significant potentials as a soil amendment to reduce HM transmission to in-vitro-grown rice plants was investigated in the soil medium naturally contaminated with HMs. The tea-BC was produced from readily available local black tea waste of a conventional fermentation process and applied in the in-vitro experiments. Among the tested doses examined, 1% tea-BC showed a more positive effect on rice plant growth and development characterized by a better relative growth rate (59.7 and 84 mg g-1 d-1 for root and shoot tissues), photosynthetic pigment intactness (62.48 μg mL-1), cellular membrane integrity (93%), and relative water (96%) than the other rates (0% BC, 3%BC, 5%BC). The mRNA expression data highlights the probability of a cation diffusion facilitator (CDF) (OsMTP11) in concert with catalase isozyme (CATa) and dehydration-responsive element binding protein (DREB1a) linking the HM detoxification, oxidative defense, and dehydration pathways with the help of tea-BC. At the optimum concentration (1%BC), this approach might reduce HM accumulation levels of crops planted in HM-contaminated farmlands.

Impact of physiochemical properties, microbes and biochar on bioavailability of toxic elements in the soil: a review

The pollution of toxic elements (TEs) in the ecosystem exhibits detrimental effects on the human health. In this paper, we debated remediation approaches for TEs polluted soils via immobilization methods employing numerous amendments with reverence to type of soil and metals, and amendment, immobilization competence, fundamental processes and field applicability. We argued the influence of pH, soil organic matter, textural properties, microbes, speciation and biochar on the bioavailability of TEs. All these properties of soil, microbes and biochar are imperative for effective and safe application of these methods in remediation of TEs contamination in the ecosystem. Further, the application of physiochemical properties, microbes and biochar as amendments has significant synergistic impacts not only on absorption of elements but also on diminution of toxic elements.

Remediation of cadmium and lead contaminated soils using Fe-OM based materials

Iron oxide-lignin composites (GLS) were prepared based on the significant role of Fe-OM in the environmental behaviour of heavy metals and lignin binding with iron oxide preferentially in soil. GLS was applied in Cd/Pb immobilization and the stability under acid rain was investigated. The results show that the iron oxide appeared weakly crystalline or amorphous similar to 2-line ferrihydrite after the addition of lignin. Agglomerates of nanoparticles with higher adsorption capacity were observed for GLS. The mobility factor (MF) of Cd/Pb in the soil decreased rapidly after adding GLS. At the 3% dosage, the MF of Cd and Pb in the soil was decreased by 58.94% and 78.15% respectively, which was approximately 5 times that of goethite (GE). The mobile and exchangeable Cd/Pb were converted to organic, amorphous Fe oxide-bound and residue fractions. Under acid rain conditions, MF continues to decline for the GLS group, increasing the organic and amorphous Fe oxide-bound fractions, while for control group (CK) and GE, the trend was the opposite. Lignin could inhibit iron oxide dissolution and stabilize the combination of Cd/Pb and iron oxides in soil. The better stability performance of GLS for Cd/Pb may be related to the higher adsorption capacity and microstructural difference after iron oxide combined with lignin.

Synthesis and application of starch-stablized Fe-Mn/biochar composites for the removal of lead from water and soil

Starch-stablized and Fe/Mn bimetals modified biochar derived from corn straw (SFM@CBC and SFM@CBC-350) were firstly prepared, characterized (FTIR, XRD, SEM, EDS, BET and XPS), and applied in Pb removal from water and soil. SFM@CBC and SFM@CBC-350 displayed highly effective adsorption performance of Pb²⁺ from wastewater with the maximum adsorption capacity of 170.91 mg g^-1 and 190.17 mg g^-1, respectively, which were much greater than that of FM@CBC (149.25 mg g^-1) and CBC (101.10 mg g^-1). Studies of adsorption kinetics, isotherms and thermodynamics indicated that the absorption of Pb²⁺ by SFM@CBC and SFM@CBC-350 was spontaneous and endothermic reaction, and it was controlled by monolayer chemisorption. The mechanism studies indicated that Pb²⁺ removal involved with multiple mechanism, including complexation (dominant process confirmed by XPS analysis), physical adsorption, electrostatic attraction, and cation exchange. The reusability test demonstrated that SFM@CBC and SFM@CBC-350 had very good stability and reusability. In addition, in order to further explore Pb removal performance of the modified biochar, SFM@CBC-350 was used in soil-ryegrass pot systems. Compared with the controls, the addition of SFM@CBC-350 reduced Pb content in soil and ryegrass, increased the biomass and total chlorophyll content, reduced the activity of antioxidant enzymes (CAT, SOD, MDA and POD) and ROS fluorescence intensity of ryegrass, thus alleviating Pb stress of ryegrass. Besides, the addition of SFM@CBC-350 could increase the richness and diversity of soil microorganisms, which was beneficial to the growth of ryegrass. Hence, SFM@CBC-350 has the potential of being used as a green, efficient and promising adsorbent in Pb removal from wastewater and soil.

Inconsistent effects of a composite soil amendment on cadmium accumulation and consumption risk of 14 vegetables

Organic and inorganic mixtures can be developed as immobilizing agents that could reduce heavy metal accumulation in crops and contribute to food safety. Here, inorganic materials (lime, L; zeolite, Z; and sepiolite, S) and organic materials (biochar, B, and compost, C) were selectively mixed to produce six composite soil amendments (LZBC, LSBC, LZC, LZB, LSC, and LSB). Given the fact that LZBC showed the best performance in decreasing soil Cd availability in the incubation experiment, it was further applied in the field condition with 14 vegetables as the test crops to investigate its effects on crop safety production in polluted greenhouse. The results showed that LZBC addition elevated rhizosphere soil pH by 0.1-2.0 units and reduced soil Cd availability by 1.85-37.99%. Both the biomass and the yields of edible parts of all vegetables were improved by LZBC addition. However, LZBC addition differently affected Cd accumulation in edible parts of the experimental vegetables, with the observation that Cd contents were significantly reduced in Allium fistulosum L., Amaranthus tricolor L., and Coriandrum sativum Linn., but increased in the three species of Lactuca sativa. Further health risk assessment showed that LZBC application significantly decreased daily intake of metal (DIM), health risk index (HRI), and target hazard quotient (THQ) for Cd in Allium fistulosum L., Amaranthus tricolor L., and Coriandrum sativum Linn., whereas increased all the indexes in Lactuca sativa. Our results showed that the effect of a composite amendment on Cd accumulation in different vegetables could be divergent and species-dependent, which suggested that it is essential to conduct a pre-experiment to verify applicable species for a specific soil amendment designed for heavy metal immobilization.

The effects of biochar and its applications in the microbial remediation of contaminated soil: A review

The amendment of biochar for soil bioremediation can improve soil conditions, influence soil microbial community, and achieve co-application of biochar-microbe to promote the removal of pollutants. This paper summarizes the positive effects of biochar on microorganisms, including acting as a shelter, providing nutrients, and improving soil conditions (soil aggregation, pH, cation exchange capacity (CEC), and enzymatic activity). These effects will cause variations in microbial abundance, activity, and community structure. Biochar can act as an electron mediator to promote electron transfer in the process of microbial degradation. And the application of biochar in soil bioremediation is also introduced. Nevertheless, toxic substances carried by biochar that may threaten microbial community shouldn't be overlooked. With this review, we can better understand biochar's involvement in soil bioremediation, which will help us choose and modify biochar in a targeted manner for the desired purpose in practical applications.

Impacts of pyrolysis temperatures on physicochemical and structural properties of green waste derived biochars for adsorption of potentially toxic elements

This study comparatively investigated the influence of changes in pyrolysis temperature on the physicochemical, structural, and adsorptive properties of biochars derived from a green waste (Cynodon dactylon L.). For this purpose, the biophysically dried green wastes were pyrolyzed at 400 °C, 600 °C, and 800 °C under the same pyrolysis conditions. The results revealed that the physicochemical and structural properties were varied, depending upon the pyrolysis temperatures. With the increase of pyrolysis temperature, the surface functional groups were escaped, the structure became more porous (pore volume of 0.089 ± 0.001), the metal oxides were remained consistent, and the biochars turned into more alkaline nature (pH of 11.9 ± 0.2). Furthermore, as referring to the adsorptive performance for potentially toxic elements, with experimental adsorption capacity of up to 33.7 mg g^-1 and removal rate up to 96% for a multi-metals containing solution, the biochars pyrolyzed at high temperature (800 °C) was significantly (p < 0.05) higher than those pyrolyzed at low temperature (400 °C). According to the physicochemical and structural properties, and the adsorptive performances of the biochars, the optimal pyrolysis temperature was herein recommended to be 800 °C.

Energy generation and revenue potential from municipal solid waste using system dynamic approach

The Municipal Solid Waste (MSW) generation per capita in developing countries is generally said to grow in proportion to the gross national product. Composting and waste to energy have a brief history as management strategies for MSW in India and as alternatives to landfilling. Analysis of Energy generation and compost potential from waste can minimize the impact of MSW on the environment with the added advantage of providing a local source of energy. The study has been carried out to develop a system dynamic (SD) model to predict the energy generation, treatment, and cost analysis for MSW up to 2030. The predictive model developed in this study showed the generation rate of electrical energy potential augmented from 0 in 2001 to 58,380 MWh in 2007 and 319,875 MWh in 2030. Whereas, the production rate of compost reduced from 77,000 tonnes in 2001 to 45,000 tonnes in 2006 and then improved to 390,000 tonnes in 2030. In addition, the predicted revenue generated from different treatment facilities increased from 0 in 2001 to Rs.335 million (4.36 million USD) in 2007 and Rs.2569 million (33.4 million USD) in 2030. As a result, revenue generated could cover the budgets required for MSW treatment and disposal services in 2030, where the required budget is negative because revenue exceeds expenditures. The developed SD model can improve a municipal solid waste management system for any City.

Concentration of potentially harmful elements (PHEs) in eggplant vegetable (Solanum melongena) irrigated with wastewater: a systematic review and meta-analysis and probabilistic health risk assessment

The main objectives of this study were PHEs concentration meta-analysis (Fe, Zn, Cr, Ni, Cu, Pb, and Cd) in eggplant irrigated by wastewater and the following estimation of non-carcinogenic (n-CR) risk for the consumers based on countries. According to the results, the rank order of PHEs concentration in eggplant was Fe (88.3 mg/kg -dry weight) > Zn (10.1 mg/kg -dry weight) > Pb (3.0 mg/kg -dry weight) > Ni (2.7 mg/kg -dry weight) > Cu (1.1 mg/kg -dry weight) > Cd (0.9 mg/kg -dry weight) > Cr (0.05 mg/kg -dry weight). Moreover, n-CR risk showed that all investigated countries (China, India, Pakistan, Turkey, and Jordan) except for United Arab Emirates (UAE) had a considerable n-CR in both age groups (adults and children).

Current trends in solid tannery waste management

The tannery is one of the leading revenue-generating sectors in developing countries. The ever-increasing demand for leather products in the global market requires converting large amounts of rawhide/skins into resilient non-putrescible finished leather. Only 20% of the raw material is converted into a finished product; the rest 80% is discarded as solid and liquid wastes during leather processing. A heavy discharge of improperly treated solid tannery waste (STW) causes a severe impact on the surrounding environment by polluting soil, surface water, and groundwater resources, posing severe hazards to human and animal health. STW comprises proteinaceous untanned and tanned waste, which requires proper treatment for eco-friendly disposal. Several strategies have been developed over the years for the reduction and recycling of STW for producing renewable energy (biogas and biohydrogen), biofuels (biodiesel and briquettes), construction material, fertilizers, commercial products (adsorbents, animal feeds, proteins, fats, and enzymes), and biodegradable packaging and non-packaging materials. In this review, we discuss various strategies adopted for recycling, reutilization, and reduction of STW in an environment-friendly manner. Furthermore, an overview of the current perspectives toward achieving a zero-waste policy is also presented to reduce the environmental burden using green-clean technology to aid the survival of present-day tanneries.

Exploring the potential effect of Achnatherum splendens L.-derived biochar treated with phosphoric acid on bioavailability of cadmium and wheat growth in contaminated soil

Biochar remediation efficiency could be enhanced through numerous treatments such as acids treatment. Still, there has little work done on H₃PO₄-treated biochar particularly biochar derived from Achnatherum splendens L. feedstock. Therefore, the present study has been conducted to further explore the potential effect of A. splendens L.-derived biochar treated with H₃PO₄ on bioavailability of Cd and wheat growth in Cd contaminated soil. Phosphoric acid and untreated biochar each applied at the rate of 1% and 2% to Cd contaminated/spiked soil in pots and having one contaminated/spiked control without biochars amendment. The results show that 2% phosphoric acid-treated biochar has the most significant increase in plant height, shoot dry weight, and grain yield of wheat as compared to contaminated control. As compared to contaminated control, maximum improvement in total chlorophyll contents, photosynthetic rate, transpiration rate, and stomatal conductance occurred with 2% phosphoric acid-treated biochar. The 2% phosphoric acid-treated biochar also declined bioavailable Cd in soil by 53%, and its accumulation in shoot and grain by 65% and 90%, respectively, compared to contaminated control. Overall, phosphoric acid-treated biochar most effectively immobilized Cd in soil and reducing its uptake and translocation to grains. Therefore, A. splendens L.-derived biochar treated with phosphoric acid could be successfully utilized for remediation of contaminated soil.

Transcriptional insights into Cu related tolerance strategies in maize linked to a novel tea-biochar

One-third of maize cultivation in Turkey has been performed in nutrient-rich soils of the coastal agricultural lands of the Black Sea Region, which is among the country's granaries. However, the yield of this chief crop is affected by Cu toxicity due to a decades-long abandoned opencast Cu-mine. As part of the modern agenda, against this problem, we valorized one of the region's signature plant waste by synthesizing a tea-derived biochar (BC) and evaluated for remediation effect on maize Cu tolerance. Among other rates (0%, 0.4%, 0.8%, 1.6%), maximum Cu absorption (168.27 mg kg^-1) was found in the 5%BC in in-vitro spiking experiments where natural Cu contamination levels were mimicked. Obvious increasing trends in both root and shoot tissues of maize plantlets growing in Cu-spiked soil (260.26 ± 5.19 mg Cu kg^-1) were recorded with proportionally increasing BC application rates. The black tea waste-BC (5%) amendment remarkably reduced the Cu uptake from Cu spiked-soil and showed no phenotypic retardation in maize. Accordingly, it boosted the metabolic and transcriptomic profile owing to up-regulation in the aquaporin and defense genes (PIP1;5 and POD1) by 1.31 and 1.6 fold. The tea-BC application also improved the soil-plant water relations by minimizing cytosolic volume changes between 85 and 90%, increasing chlorophyll intactness (65%) and membrane stability up to 41%. The tea-BC could be a strong agent with potential agronomic benefits in the remediation of the cationic Cu toxicity that occurred in the mining-contaminated agricultural soils.

Calcite in combination with olive pulp biochar reduces Ni mobility in soil and its distribution in chili plant

The presence of Ni above the permissible limit in agriculture soils poses negative effects on soil health, crop quality, and crop productivity. Surprisingly, the usage of various organic and inorganic amendments can reduce Ni mobility in the soil and its distribution in the crops. A pot experiment was conducted to elucidate the effects of olive pulp biochar (BR), calcite (CAL), and wheat straw (WS), as sole amendments and their mixtures of 50:50 ratio, added to Ni polluted soil on Ni mobility in the soil, Ni immobilization index (Ni - IMi), soil enzymatic activities, Ni distribution in parts of chili plant, Ni translocation factor and bioaccumulation factor in fruit, plant growth parameters and oxidative stress encountered by the plants. Outcomes of this pot experiment revealed that amendments raised soil pH, improved soil enzymatic activities, values of Ni - IMi, while significantly reduced bioavailable Ni fraction in the post-harvest soil. However, the highest activities of acid phosphatase, urease, catalase, and dehydrogenase by 50, 70, 239, and 111%, respectively, improvement in Ni - IMi up to 60% while 60% reduction in the bioavailable Ni fraction was observed in BR + CAL treatment, compared to control was noted. Among all amendments, the top most reduction in Ni concentrations in shoots, roots, fruit, Translocation Factor (TF), and Bioaccumulation Factor (BAF) values of fruit by 72%, 36%, 86%, 72%, and 86%, in BR + CAL treatment, compared to control. Moreover, the plants growing on BR + CAL amended Ni contaminated soil showed the topmost improvement in plant phonological parameters while encountered the least oxidative stress. Such findings refer to the prospective usage of BR + CAL at 50:50 ratio than BR, CAL, WS alone, and BR + WS as well as WS + CAL for reducing Ni mobility in the soil, improving Ni - IMi, soil enzymatic activities, plant phonological and oxidative stress while reducing Ni distribution in plant parts. Novelty statementIn this experiment, it was hypothesized that amending Ni polluted soil with olive pulp biochar (BR), CAL, and WS as alone soil amendments and their combinations at 50:50 ratios can reduce Ni bioavailability in soil, Ni distribution in chili plant and oxidative stress encountered by the plants. Moreover, these amendments may improve, soil enzymatic activities, Ni immobilization index, plant phenological traits. Therefore, it was aimed to undertake useful scientific planning and research, to restore and rehabilitate the dwellings, biological resources and to minimize the sufferings of the peoples in nutrient-poor Ni contaminated soils, by improving soil health and chili productivity.

Biochar and exogenous calcium assisted alleviation of Pb phytotoxicity in water spinach (Ipomoea aquatica Forsk) cultivated in Pb-spiked soil

The consumption of vegetables grown in Pb-polluted soils causes serious threats to human health around the globe. In this study, we evaluated the Pb toxicity alleviation in water spinach grown of pot experiments in Pb-spiked soil treated with biochar and exogenous calcium. The results showed that both biochar and exogenous calcium alleviated Pb stress in water spinach, which was mainly manifested on its improved soil health and increased growth and decreased Pb uptake. Incorporation of 3% biochar significantly reduced CaCl₂ extracted Pb by 53.6% and decreased Pb accumulation in roots (67.1%) and shoots (80.8%). Our also findings indicated that Pb detoxification mechanism of biochar and exogenous calcium was totally different, while they can induce a synergistic impact on water spinach Pb stress alleviation. The combination of biochar and exogenous calcium in Pb-contaminated soil remediation may complement each other and reduce Pb entry into the human body through vegetables.

Co-pyrolysis of corn stover with industrial coal ash for in situ efficient remediation of heavy metals in multi-polluted soil

Coal ash incorporated biochar (CA/BC) composite was prepared by co-pyrolysis of agricultural residue and industrial coal ash and applied for remediation of soils polluted by lead (Pb) and cadmium (Cd). The results showed that immobilization efficiency of CA/BC for heavy metals (HMs) was significantly enhanced by 77.1 % (Pb) and 42.7 % (Cd) compared to pristine biochar (BC), and this was mainly due to the increased pH value, surface functionality and surface negative charge. By the introduction of 5 % CA/BC, the polluted soils showed the highest reduction of leaching toxicity by 67.9 % (Pb) and 49.7 % (Cd), respectively. The chemical speciation of Pb and Cd in soils was changed remarkably and the reduced bioavailable Pb and Cd were mainly transformed from acid-soluble fraction into the most stable form of residual fraction. The mechanism study showed that surface precipitation, complexation, cation exchange and cation-π interaction of CA/BC mainly contributed to heavy metals (HMs) immobilization. The pot experiments further confirmed that incorporation of 5 % CA/BC effectively reduced plant Pb and Cd accumulation by 81 % and 62.5 % respectively, and significantly promoted the plant growth of paddy rice by 3.1, 2.2 and 2.0 times in terms of root, stem length and dry mass parameters. The present study offered a cost-effective and green method to prepare soil amendment with great potential for remediation of soils polluted by HMs and realized the value-added utilization of waste agricultural residue and industrial coal ash.

Reliable environmental trace heavy metal analysis with potentiometric ion sensors - reality or a distant dream

Over two decades have passed since polymeric membrane ion-selective electrodes were found to exhibit sufficiently lower detection limits. This in turn brought a great promise to measure trace level concentrations of heavy metals using potentiometric ion sensors at environmental conditions. Despite great efforts, trace analysis of heavy metals using ion-selective electrodes at environmental conditions is still not commercially available. This work will predominantly concentrate on summarizing and evaluating prospects of using potentiometric ion sensors in view of environmental determination of heavy metals in on-site and on-line analysis modes. Challenges associated with development of reliable potentiometric sensors to be operational in environmental conditions will be discussed and reasoning behind unsuccessful efforts to develop potentiometric on-site and on-line environmental ion sensors will be explored. In short, it is now clear that solely lowering the detection limit of the ion-selective electrodes does not guarantee development of successful sensors that would meet the requirement of environmental matrices over long term usage. More pressing challenges of the properties and the performance of the potentiometric sensors must be addressed first before considering extending their sensitivity to low analyte concentrations. These are, in order of importance, selectivity of the ion-selective membrane to main ion followed by the membrane resistance to parallel processes, such as water ingress to the ISM, light sensitivity, change in temperature, presence of gasses in solution and pH and finally resistance of the ion-selective membrane to fouling. In the future, targeted on-site and on-line environmental sensors should be developed, addressing specific environmental conditions. Thus, ion-selective electrodes should be developed with the intention to be suitable to the operational environmental conditions, rather than looking at universal sensor design validated in the idealized and simple sample matrices.

Assessment of industrial wastewater for potentially toxic elements, human health (dermal) risks, and pollution sources: A case study of Gadoon Amazai industrial estate, Swabi, Pakistan

In this study, industrial wastewater and groundwater were comparatively investigated for their physicochemical properties, concentrations of potentially toxic elements (PTEs), human health risks and pollution source(s). Every month, 34 wastewater samples and 26 groundwater samples were collected, for a duration of one year. The results showed that the physicochemical parameters and concentrations of PTEs in the industrial wastewater exceeded the maximum permissible limits of Pakistan Environmental Protection Agency (2000). Specifically, it was found that total dissolved solids (5%), total suspended solids (190%), chemical oxygen demand (107%), five-days biochemical oxygen demand (5.7 times), grease/oil (27.1 times), Fe (67%), Zn (29%), Mn (32%), Cu (27%), Ni (16%), Cr (8%), Pb (106%), and Cd (80%) were higher than the permissible limits. The carcinogenic and non-carcinogenic dermal health risks for wastewater irrigation group were significantly higher than the groundwater irrigation group. The hazard index of irrigation with industrial wastewater was 180 times higher than the groundwater. The principal component analysis indicated that industry was the main polluting source. The cluster analysis results of all PTEs (except Fe) were found in the same clade in the dendrogram, which showed a strong similarity within the monthly data set of the whole year. The study recommends using adjacent groundwater instead of industrial wastewater for irrigation purposes.

(Im)mobilization of arsenic, chromium, and nickel in soils via biochar: A meta-analysis

Biochar is a promising immobilizing agent of trace elements (TEs) in contaminated soils. However, several contradictory results have been reported regarding the potential of biochar to immobilize arsenic (As), chromium (Cr), and nickel (Ni) in contaminated soils. We conducted a meta-analysis on the published papers since 2006 until 2019 to examine the effects of biochar on the chemical (im)mobilization of As, Cr, and Ni in contaminated soils and to elucidate the major factors that control their interactions with biochar in soil. We synthesized 48 individual papers comprised of a total of 9351 pairwise comparisons and used the statistical tool of Cohen's d as an appropriate effect size for the comparison between means. We found that the application of biochar often increased the As mobilization in soils. Important variables that modulated the biochar effects on As mobilization in soil were pyrolysis temperature and time (ranging between 8 and 16 times when T > 450 °C and t > 1hr), organic matter (7-16 times when SOM<3%) and further site conditions. In contrast to As, biochar efficiently immobilized Cr and Ni in contaminated soils. The extent of the Cr and Ni immobilization was determined by the feedstock (Cr: 7-18 times for agricultural residue-derived biochar; Ni: 13-32 times for woody biomass-derived biochar). Our meta-analysis provides a compilation on the potential of different types of biochar to reduce/increase the mobilization of As, Cr, and Ni in various soils and under different experimental conditions. This study provides important insights on factors that affect biochar's efficiency for the (im)mobilization of As, Cr, and Ni in contaminated soils. While biochar effectively immobilizes Cr and Ni, a proper management of As-polluted soils with pristine biochar is still challenging. This limitation might be overcome by modification of biochar surfaces to exhibit higher surface area and functionality and active sites for surface complexation with TEs.

Processed animal manure improves morpho-physiological and biochemical characteristics of Brassica napus L. under nickel and salinity stress

Soil contamination with readily soluble salts and heavy metals is a major challenge concerning sustainable crop production. The use of organic wastes in agriculture not only helps in waste reduction but also acts as a soil conditioner and bio-stimulant for enhancing crop growth. In this regard, a pot experiment was conducted to investigate the effect of raw and processed animal manure (AM) on the growth, yield, and physicochemical parameters of Brassica napus L. developed under salinity and Ni stress. The experiment comprised two salinity levels (1.05 and 8 dS m^-1), two Ni levels (0 and 50 mg kg^-1), and two types of AMs (raw and processed at a rate of 2% w/w). A control treatment without AM incorporation was also included. In results, the application of AM markedly increased the growth and yield of B. napus under Ni and salinity stress; at the same time, it improved the physiological and chemical parameters of the said crop. Similarly, incorporation of processed AM significantly improved nutrient uptake and decreased Na/K ratios in the shoot and grain under the different stress conditions, as compared to the control. Likewise, Ni uptake in the grain, shoot, and root samples was also significantly reduced under the AM treatment. Also, the application of AM significantly reduced the daily intake of metal (DIM) index and the health risk index (HRI) values under the different stress conditions, as compared to the control. In conclusion, the application of processed AM constitutes an effective agricultural strategy to alleviate the adverse effects of Ni and salinity stress on growth, physiology, and yield of B. napus, thus resulting in enhanced productivity, as well as reduced risks associated with human health.

Environmental footprint of voltammetric sensors based on screen-printed electrodes: An assessment towards "green" sensor manufacturing

Voltammetric sensors based on screen-printed electrodes (SPEs) await diverse applications in environmental monitoring, food, agricultural and biomedical analysis. However, due to the single-use and disposable characteristics of SPEs and the scale of measurements performed, their environmental impacts should be considered. A life cycle assessment was conducted to evaluate the environmental footprint of SPEs manufactured using various substrate materials (SMs: cotton textile, HDPE plastic, Kraft paper, graphic paper, glass, and ceramic) and electrode materials (EMs: platinum, gold, silver, copper, carbon black, and carbon nanotubes (CNTs)). The greatest environmental impact was observed when cotton textile was used as SM. HDPE plastic demonstrated the least impact (13 out of 19 categories), followed by ceramic, glass and paper. However, considering the end-of-life scenarios and release of microplastics into the environment, ceramic, glass or paper could be the most suitable options for SMs. Amongst the EMs, the replacement of metals, especially noble metals, by carbon-based EMs greatly reduces the environmental footprint of SPEs. Compared with other materials, carbon black was the least impactful on the environment. On the other hand, copper and waste-derived CNTs (WCNTs) showed low impacts except for terrestrial ecotoxicity and human toxicity (non-cancer) potentials. In comparison to commercial CNTs (CCNTs), WCNTs demonstrated lower environmental footprint and comparable voltammetric performance in heavy metal detections, justifying the substitution of CCNTs with WCNTs in commercial applications. In conclusion, a combination of carbon black or WCNTs EMs with ceramic, glass or paper SMs represents the most environmentally friendly SPE configurations for voltammetric sensor arrangement.

Effects of different biochars on physicochemical properties and immobilization of potentially toxic elements in soil - A geostatistical approach

The impact of different biochars (BCs) on the physicochemical properties and immobilization of potentially toxic elements (PTEs) in contaminated soil irrigated with industrial wastewater for the last three decades was studied. Furthermore, the efficacy of applied BCs in reducing geostatistical risks was also evaluated. For this purpose, BCs were prepared from green waste (Cynodon dactylon L.) for the first time at different pyrolysis temperature (400 °C, 600 °C and 800 °C), and amended the contaminated soil in pots with two different ratios of 2% and 5% (w/w) under controlled conditions. The BCs amended soil samples were analyzed after five months (equivalent to the life span of a wheat crop). The physicochemical impacts of applied BCs on the soil showed that the acidic soil was changed to basic. A tremendous increase in water holding capacity, cation exchange capacity, dissolved organic carbon, carbon, phosphorus and potassium contents was observed. The PTEs concentrations and geostatistical risks were significantly (p ≤ 0.05) decreased by all the BCs. Among them, BC prepared at 800 °C and applied at a ratio of 5% was showed the best effects by reducing the bioavailable concentrations of Cd, Pb, Cr, Ni, Cu, Mn, Fe, As, Co and Zn in 88%, 87%, 78%, 76%, 69%, 65%, 64%, 63%, 46% and 21%, respectively. Similarly, significant (p ≤ 0.05) reductions in geoaccumulation index, enrichment factor, contamination factor, and ecological risk were recorded. Therefore, BC prepared at 800 °C and applied at a ratio of 5% is recommended for soil remediation.

Simultaneous remediation and fertility improvement of heavy metals contaminated soil by a novel composite hydrogel synthesized from food waste

Soil contamination by heavy metals constitutes a serious global environmental problem, and numerous remediation technologies have been developed. In this study, a novel soil remediation agent, namely composite hydrogel (leftover rice-g-poly(acrylic acid)/montmorillonite/Urea, LR-g-PAA/MMT/urea), was prepared based on free radical polymerization cross-linking technology. Experimental results indicated that the LR-g-PAA/MMT/urea dosage increased from 0% to 10%, the oxidizable state proportions of Cd, Cu, Pb and Zn in contaminated soil increased from 8.3%, 23.7%, 54.0% and 11.4%-71.3%, 61.0%, 76.5%, and 27.9%, respectively. Compared with control experiment, the residue state growth rate were 56.6%, 23.4% and 39.8% for Cu, Pb and Zn respectively with 10% dosage of composite hydrogel. Simultaneously, the LR-g-PAA/MMT/urea was also seen to enhance soil fertility, including organic matter content, cation exchange capacity, and N and P contents. Pot experiments for biological toxicity suggested that the addition of hydrogel weakened the toxic effect of heavy metals on cotton seeds, and the action effect was increasingly visible with the increase of hydrogel dosage. The analysis of the mechanism involved suggested that the organic matter and its possessed characteristic functional groups could weaken the biological toxicity via complexation, adsorption, and ion exchange. Overall, the synthesized composite hydrogel exhibits great potential for the simultaneous remediation and fertility improvement of heavy metal contaminated soil.

Metagenomic analysis of microbial community and its role in bioelectrokinetic remediation of tannery contaminated soil

Tanneries create a serious threat to the environment by generating a significant amount of toxic metal-containing solid waste. This study deals with the application of bio-electrokinetic remediation (Bio-EK) of tannery effluent contaminated soil (TECS). Metagenomes representing the TECS sample were sequenced using the Illumina HiSeq platform. The bioreduction of hexavalent chromium Cr(VI)to trivalent chromium Cr (III) was achieved by BIO-EK techniques. NGS-data (Next Generation Sequencing) analysis was revealed that Proteobacteria, Firmicutes, Bacteroidetes, Actinobacteria, and Planctomycetes were identified in the bio-electrokinetic system. Proteobacteria are responsible for the bioreduction of chromium hexavalent by the formation of FeS particles. The bio-generated FeS particles can be reduced the toxic chromium (VI) to non-toxic chromium (III) in soil. Simultaneously total chromium and organic content were significantly removed in BIO-EK (40 and 290 mg kg^-1) when compared to control soil (182 and 240 mg kg^-1). The presence of pollutant degrading microbes such as Desulfovibrio, Pseudomonas, Bacillus, Clostridium, Halanaerobium enhanced the bioreduction of the chromium during the electrokinetic remediation. This study can be claimed that the microbial cultures assisted electrokinetic remediation of total chromium, organic and iron in the tannery effluent contaminated soil was one of the suitable efficient techniques. In addition, the viability of the new combination technology developed (Electrokinetic + Bio) to treat low-permeability polluted soils was demonstrated.

Biochar application modified growth and physiological parameters of Ocimum ciliatum L. and reduced human risk assessment under cadmium stress

Biochar (BC) is prepared from waste organic material that can improve soil health in the contaminated area. Soil pollution with cadmium (Cd) is one of the worldwide problems. The present study aimed to evaluate the BC influence on some morphophysiological and biochemical characteristics, also Cd concentration of Ocimum ciliatum L. leaves under Cd stress as well as human risk assessment. Therefore, a pot factorial arrangement based on a completely randomized design was done which included three levels of BC (non-BC, 1%, and 2% of the pot soil) and three Cd levels (0, 20, and 40 mg/kg soil) with three replications. The results of the present study indicated that BC application improved morphological traits, photosynthetic pigments, relative water content (RWC), and catalase (CAT) activity of O. ciliatum under Cd stress and reduced total soluble sugars, total phenol, antioxidant activity, proline content, electrolyte leakage (EL), soluble protein content, ascorbate peroxidase (APX), and guaiacol peroxidase (GPX) activities, and Cd concentration as well as target hazard quotient (THQ). In conclusion, based on the findings of this study, BC could be applied as an environmental friendly amendment in Cd-polluted soil to ameliorate the negative influences of Cd stress on O. ciliatum and reduces Cd levels and THQ in the plants due to the absorption properties of BC. This means that BC usage in contaminated soil helps to reduce pollutions and decreases the human risk assessment.

Fe-Mn oxide modified biochar decreases phthalate uptake and improves grain quality of wheat grown in phthalate-contaminated fluvo-aquic soil

We used a pot experiment to investigate the effectiveness of 0.5, 1.0, and 2.0% biochar (BC) or iron-manganese oxide modified biochar (FMBC) additions on the biomass, enzyme activity, and grain quality of wheat plants grown in dibutyl phthalate (DBP) and di-(2-ethylhcxyl) phthalate (DEHP) polluted fluvo-aquic soils, as well as the bioavailability of DBP and DEHP. BC and FMBC applications significantly reduced DBP and DEHP accumulation in grains, which enhanced the content of starch and protein-related enzyme, thereby improving yield, and starch and protein content in wheat grains and increasing the content of minerals including Fe, Mn, K and Ca. Molecular docking assays showed that DBP and DEHP could bind to starch synthase (GBSS) through hydrogen bonds and intermolecular forces, which may have hindered the entry of substrates or occupied the binding sites of the reactants, thus inhibiting the activity of GBSS. In addition, FMBC treatment had a better inhibitory effect on the phytotoxicity of DBP and DEHP on wheat grain than BC treatment. This result might be attributed to the fact that FMBC has more functional groups and porous structure, and larger specific surface area. In summary, these findings contribute to our understanding of the mechanism of phthalate phytotoxicity, which may help us prevent/reduce it in the future.

Functionalization of ultrasound enhanced sewage sludge-derived biochar: Physicochemical improvement and its effects on soil enzyme activities and heavy metals availability

Poor physicochemical characteristics and high heavy metals content are main limitations of applying sludge-based biochars in remediation studies. The present study attempts to combine two practical approaches of ultrasound pre-treatment with low-time and low-frequency and chemical functionalization using citric acid. The aims of this study are enhancement physicochemical characteristics and environmental applicability of sludge-derived biochar. The characteristics of obtained ultrasound-treated functionalized biochar (UFB), sludge-derived biochar (SDB) and sewage sludge (SS) were evaluated. Then, the effects of these additives on soil heavy metals availability, soil enzyme activities and soil physicochemical characteristics were investigated during a 2-month stabilization process. The results indicated that ultrasound pre-treatment and functionalization considerably increased pore volume, surface area, and surface functional groups of the biochar, but significantly decreased total heavy metals concentration and metals ecological risk index (Er). The results of soil amending showed that application of UFB decreased Pb, Zn and Cd availability in soil by 85.3, 82.9 and 30.6%, respectively. In all cases, except for Cd, the Pb and Zn availability decreased by UFB was two times greater than the availability decreased by SDB and SS. Compared to SDB, the UFB potentially enhanced the positive effect of additive on soil enzyme activities. The obtained results revealed that the feasible, uncomplicated physical and chemical techniques can be used as a valuable approach for enhancing the environmental applicability of sludge-derived biochar and management of the excessively produced sewage sludge in the world.

Simultaneous immobilization of Pb, Cd and As in soil by hybrid iron-, sulfate- and phosphate-based bio-nanocomposite: Effectiveness, long-term stability and bioavailablity/bioaccessibility evaluation

Here, the bio-nanocomposite (n-HFP + n-HFS)@An was developed to simultaneously immobilize Pb, Cd and As in the severely contaminated soil. The immobilization rates of diethylenetriaminepentaacetic acid (DTPA)/decarbonate-extracted bioavailable Pb, Cd and As were 59.87%, 31.28% and 62.30%, and the immobilization rates of their water-soluble forms were 63.12%, 60.02% and 89.39%, respectively. Moreover, the ten-year acid rain simulated leaching assay showed that the maximum cumulative release contents of Pb, Cd and As in the treated soil samples were decreased by 2.94, 2.46 and 40.60 times, comparing to the un-treated ones. Additionally, the results of SBRC (Solubility Bioaccessibility Research Consortium) revealed that the bioaccessible rates of the three metals in intestinal phase were lower than in gastric phase, and both of them decreased with increasing the immobilization time. The gastric bioaccessibility of Pb, Cd and As had a higher correlation with the contents of water-soluble forms, while the intestinal bioaccessibility was more strongly positively associated with the bioavailable forms.

Effect of carbonization methods on the properties of tea waste biochars and their application in tetracycline removal from aqueous solutions

The properties of biochars and their adsorption performance are highly dependent on the carbonation methods. In this study, five carbonation methods, namely, hydrothermal treatment (HT), direct carbonization (BC), carbonization of hydrochar (HBC), KHCO₃ activation carbonation (KBC), and KHCO₃ activation carbonation of hydrochar (KHBC), were adopted to prepare tea waste biochars. Adsorption behaviors and mechanisms toward tetracycline (TC) by biochar in the aquatic environment were investigated. The results showed that carbonation methods significantly influence the morphology, carbon structure, chemical composition, and functional groups of the biochars based on the characterization of surface area and pore volume analysis, Fourier Transform Infrared Spectroscopy, Raman spectrum, Scanning Electron Microscope, Transmission Electron Microscope, X-ray photoelectron spectroscopy, X-Ray Diffraction, and elemental analysis. Combination of hydrothermal treatment with KHCO₃ activation can significantly increase the surface area and enlarge the pore structure of biochar (KHBC and KBC). The BET of KHCO₃-activated BCs nearly increased 280 times (KHBC: 1350.80 m² g^-1; KBC: 1405.06 m² g^-1). BET, total pore volume and micropores volume of biochar has a positive influence on TC adsorption capacity. In addition, all adsorption processes can be well fitted by Langmuir and pseudo-second-order kinetic models. The maximum adsorption capacity of KHCO₃-activated BCs nearly increased approximately 40 times (KHBC: 451.45 mg g^-1; KBC: 425.17 mg g^-1). The dominant mechanisms of biochar-adsorbed TC were pore-filling effect and π-π interactions, followed by hydrogen bonds and electrostatic interactions. Therefore, KHBC has the potential to act as sorbents for TC removal from aquatic environment.

Modeling the effect of salt-affected soil on water balance fluxes and nitrous oxide emission using modified DNDC

Soil salinity restricts plant growth, affects soil water balance and nitrous oxide (N₂O) fluxes and can contaminate surface and groundwater. In this study, the Denitrification Decomposition (DNDC) model was modified to couple salt and water balance equations (SALT-DNDC) to investigate the effect of salinity on water balance and N₂O fluxes. The model was examined against four growing seasons (2008-11) of observed data from Lethbridge, Alberta, Canada. Then, the model was used to simulate water filled pore space (WFPS), salt concentration and the N₂O flux from agricultural soils. The results show that the effects of salinity on WFPS vary in different soil layers. Within shallow soil layers (<20 cm from soil surface) the salt concentration does not affect the average WFPS when initial salt concentrations range from 5 to 20 dS/m. However, in deeper soil layers (>20 cm from soil surface), when the initial salt concentration ranges from 5 to 20 dS/m it could indirectly affect the average WFPS due to changes of osmotic potential and transpiration. When AW is greater than 40%, the average growing season N₂O emissions increase to a range of 0.6-1.0 g-N/ha/d at initial salt concentrations (5-20 dS/m) from a range of 0.5-0.7 g-N/ha/d when the salt concentrations is 0 dS/m. The newly developed SALT-DNDC model provides a unique tool to help investigate interactive effects among salt, soil, water, vegetation, and weather conditions on N₂O fluxes.

Application of macroalgal biomass derived biochar and bioelectrochemical system with Shewanella for the adsorptive removal and biodegradation of toxic azo dye

The present study aimed towards adsorptive removal of the toxic azo dye onto biochar derived from Eucheuma spinosum biomass. Characterization of the produced biochar was performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET). Eucheuma spinosum biochar (ES-BC) produced at 600 °C revealed a maximum adsorption capacity of 331.97 mg/g towards reactive red 120 dye. The adsorption data fitted best to the pseudo-second order kinetics (R² > 0.99) and Langmuir isotherm (R² > 0.98) models. These adsorption models signified the chemisorption mechanism with monolayer coverage of the adsorbent surface with dye molecules. Furthermore, the adsorption process was mainly governed by electrostatic interaction, ion exchange, metal complexation, and hydrogen bonding as supported by the solution pH, FTIR, XPS, and XRD investigation. Nevertheless, alone adsorption technology could not offer a complete solution for eliminating the noxious dyes. Therefore, the bioelectrochemical system (BES) equipped with previously isolated marine Shewanella marisflavi BBL25 was intended for the complete remediation of azo dye. The BES II demonstrated highest dye decolorization (97.06%) within 48 h at biocathode where the reductive cleavage of the azo bond occurred. Cyclic voltammetry (CV) studies of the BES revealed perfect redox reactions taking place where the redox mediators shuttled the electrons to the dye molecule to accelerate the dye decolorization. Besides, the GC-MS analysis revealed biotransformation of the dye into less toxic metabolites as tested using a phyto and cytogenotoxicity.

Prospective usage of magnesium potassium phosphate cement combined with Bougainvillea alba derived biochar to reduce Pb bioavailability in soil and its uptake by Spinacia oleracea L

Combining biochar (BR) with other immobilizing amendments has additive effects on Pb immobilization and been recognized to be effective for the restoration of Pb polluted soils. However, the impacts of different proportions between BR and a highly efficient Pb immobilizing agent called "magnesium potassium phosphate cement (MC)" have never been earlier investigated. This work aimed to investigate the consequences of BR and MC alone and their mixtures of 25:75, 50:50, and 75:25 ratios on Pb bioavailability, Pb immobilization index (Pb-IMMi), and enzymatic activities in Pb polluted soil. Furthermore, amendments effects on Pb distribution in spinach, growth, antioxidant capacity, biochemical, and nutritional spectrum were also investigated. We found that MC alone performed well to immobilize Pb in soil and reducing its distribution in shoots, but was less efficient to improve soil enzymatic activities and plant attributes. Conversely, the application of BR alone stimulated soil enzymatic activities, plant growth, and quality but was less effective to immobilize Pb in soil and reducing shoot Pb concentrations. The combinations of BR and MC of various ratios showed variable results. Interestingly, the most promising outcomes were obtained with BR50%+MC50% treatment which resulted in enhanced Pb-IMMi (73%), activities of soil enzymes, plant growth and quality, and antioxidant capacity, compared to control. Likewise, significant reductions in Pb concentrations in shoots (85%), roots (78%), extractable Pb (73%) were also obtained with BR50%+MC50% treatment, compared to control. Such outcomes point towards a cost-effective approach for reducing Pb uptake by the plants via using MC and BR at a 50:50 ratio.

The impact of pyrolysis temperature on physicochemical properties and pulmonary toxicity of tobacco stem micro-biochar

Biochars (BCs) are currently widely used, yet their impact on human health is mostly unknown. We generated micro-tobacco stem-pyrolysed BCs (mTBCs) at different pyrolysis temperatures and assessed pulmonary toxicity in normal human lung epithelial BEAS-2B cells. mTBCs generated at 350 °C (mTBC350) and 650 °C (mTBC650) were analysed and compared for physicochemical properties and adverse effects. Pyrolysis temperature had a significant influence on chemical composition, particle size, specific surface area and aromatic carbon structure. mTBC650 displayed a highly ordered aromatic carbon structure with smaller particle size, high surface area (20.09 m2/g) and high polycyclic aromatic hydrocarbon and metal content. This composition could promote reactive oxygen species accumulation accompanied by greater cytotoxicity, genotoxicity and epithelial barrier malfunction in cultured cells. Thus, the risk of pulmonary toxicity owing to micro-BCs (mBCs) is affected by pyrolysis temperature. Long-term exposure to mBCs produced at high temperatures may lead to or exacerbate pulmonary disease.

Goethite dispersed corn straw-derived biochar for phosphate recovery from synthetic urine and its potential as a slow-release fertilizer

In this study, goethiete (α-FeOOH) -biochar (BC) composites were successfully developed from a co-precipitation reaction under alkaline conditions (pH = 11.93) and used as the adsorbent for phosphate recovery from urine. The morphology and crystallinity of α-FeOOH-BC composites were characterized by scanning electron microscopy and X-ray diffraction. α-FeOOH loaded BC was found to be amorphous. This may be caused by the Si residue in BC. The Elovich model and the Langmuir model fit better to the kinetic and isotherm results of α-FeOOH-600BC, respectively, indicating that phosphate adsorption is mainly a chemisorption and monolayer adsorption process. The α-FeOOH-600BC with amorphous structure showed higher adsorption capacity than crystalline α-FeOOH, and the maximum phosphate sorption capacity reached 57.39 mg g^-1. Additionally, the extractable phosphate of this material was approximately 967.5 mg P·kg^-1 suggesting the α-FeOOH-600BC after adsorption could be a promising alternative as a slow-phosphate-release fertilizer. Fourier-transform infrared and X-ray induced photoelectron spectroscopy results showed that the active sites of the adsorption of phosphate were the Fe-OH bonds that formed inner-sphere complexes (Fe-O-P).

Assessment of Drinking Water Sources for Water Quality, Human Health Risks, and Pollution Sources: A Case Study of the District Bajaur, Pakistan

The focus of the present study was to assess the quality of different drinking water sources, impacts of poor water quality on human health, and to apportion pollution source(s) of the district Bajaur, Pakistan. Drinking water samples (n = 331) were randomly collected from springs, hand pumps, open wells, and tube wells and analyzed for physicochemical parameters including toxic elements, and bacteriological contamination (i.e., Escherichia coli). Furthermore, a questionnaire survey was conducted to record the cases of waterborne diseases in the study area. The results showed that total suspended solids and bacteriological contamination exceeded the permissible limits of the WHO in all four of the water sources. Among the potentially toxic elements, Cd, Pb, and Mn were above the permissible limits of the WHO in some samples. The hazard index for spring water was found to exceed the toxicity level (i.e., HI > 1) set by US EPA for both adults and children, while the sources from hand pumps, open wells, and tube wells were within the safe limit. The order for the overall safety level for water quality in the study area was tube wells > open wells > hand pumps > springs. The pollution source apportionment statistics revealed that both geogenic and anthropogenic activities are the sources of drinking water contamination. The results of the questionnaire survey indicated that reports of waterborne diseases were highest in respondents who took their drinking water from springs, whereas reports of diseases were moderate in respondents taking their water from open wells and hand pumps and lowest in respondents taking their water from tube wells. Based on the findings of the study, the tube well source of water is recommended for drinking water purposes.

Emerging risks of toxic metal(loid)s in soil-vegetables influenced by steel-making activities and isotopic source apportionment

Industrial activities tend to deteriorate adjacent agricultural lands due to accumulation of potentially toxic elements in soils and crops. However, better understanding of their distinctive source partitions and transfer process remains insufficient in steel-making area. The paper focuses on the pollution levels, health risks, and provenance identification of Tl, As, Pb, Cu, Ni, Co, Sb, Cd, Zn, Be, Cr, Fe, Mn, Mo, Sn, and V in common vegetables from different farmlands near a steel-making plant. The results showed that the Tl, As, Pb, Cd, Cr, Cu and Mn were of high-level contamination in soils and generally above the maximum permissible level (MPL). Calculation using hazard quotients (HQ) exhibited that consumption of the studied vegetables may entail significant health risks to residents, especially for children, resulting from the elevated contents of Tl, As and associated toxic elements. Calculation by binary mixing model using Pb isotopic compositions suggested that steel-making activities contributed to 35-80% of the contamination of Pb and As in vegetables. It is necessary to adopt appropriate remediation measures to mitigate the farmland contamination and ensure the food safety of the agricultural products.

Fe-doped biochar derived from waste sludge for degradation of rhodamine B via enhancing activation of peroxymonosulfate

The disposal and management of waste sludge is a considerable challenge for environmental protection and resource utilization. Herein, sludge-based biochar material loaded with nano-Fe₃O₄ (xS@Fe-y) was fabricated via hydrothermal carbonization process and employed as catalyst to activate peroxymonosulfate (PMS) for degrading organic dyes in wastewater. Benefiting from the proper iron content, porous structure and the good dispersibility of iron on the catalyst surface, the proposed 5S@Fe-500 catalyst not only exhibited excellent catalytic activity and durability in the activation of PMS to degrade Rhodamine B (RhB), which was almost completely removed in 10 min (50 mL 50 mg L^-1), but also performed broad application prospects in pollutant degradation. More importantly, the free radical quenching test and electron spin-resonance spectroscopy (ESR) detection demonstrated that O₂•^-, SO₄•^-, OH and ¹O₂ were generated during the process of catalyst activation of PMS. Based on this, a possible reaction pathway for degrading RhB with the aid of 5S@Fe-500 was put forward. It is believed that this work offers a promising reuse method of converting the waste sludge to a high efficiency and low-cost nano magnetic catalyst to activate PMS for degrading refractory organic pollutants in aquatic surroundings.

Alternative tanning technologies and their suitability in curbing environmental pollution from the leather industry: A comprehensive review

Chrome tanning remains the most favourite technology in the leather industry worldwide due to its ability to produce leather with attributes desirable for high-quality leather such as excellent hydrothermal stability, better dyeing characteristics and softness. Nevertheless, the technology has been censured globally for its severe environmental detriments and adverse effects on human health and other organisms. Developing alternative eco-friendly tanning technologies capable of producing leather of high quality has remained a challenging scientific inquiry. This review article provides an assessment of various eco-friendly tanning attempts geared towards improving or replacing the chrome technology without compromising the quality of the produced leather. The reviewed publications have ascertained that, these attempts have been centred on recycling of spent liquors; chromium exhaustion enhancement and total replacement of chromium salts. The research gaps and levels of key environmental pollutants from the reviewed technologies are presented, and the qualities of the leather produced from these technologies are highlighted. Of all the examined alternative technologies, total replacement of chromium salts sounds ideal to elude adverse effects associated with chrome tanning. Combination tanning, which implies blending two tanning agents that individually cannot impart desired properties to the leather, is anticipated to be an alternative technology to chrome tanning. Apart from being an eco-friendly technology, combination tanning produces leather with similar features to those produced by chrome tanning. In this regard, blending vegetable tannins with aluminium sulphate provides a promising chrome-free tanning technology. However, further studies to optimize combination tanning technologies to suit industrial applications are highly recommended.

Properties and adsorption mechanism of magnetic biochar modified with molybdenum disulfide for cadmium in aqueous solution

In this paper, we present the preparation of MoS₂-modified magnetic biochar (MoS₂@MBC) as a novel adsorbent by a simple hydrothermal method. MoS₂@MBC contains abundant S-containing functional groups that facilitate efficient Cd(II) removal from aqueous systems. We employed various characterization techniques to explore the morphology, surface area, and chemical composition of MoS₂@MBC; these included Brunauer-Emmett-Teller analysis scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction,. The results indicated the successful decoration of the surface of MoS₂@MBC with iron and MoS₂, and a higher surface area of MoS₂@MBC than that of unmodified biochar. Moreover, adsorption properties including thermodynamics and kinetics were investigated along with the effects of pH, humic acid, and ionic strength on the Cd(II) adsorption onto MoS₂@MBC. The O-, C-, S-, and Fe-containing functional groups on the surface of MoS₂@MBC led to an electrostatic attraction of Cd(II) and strong Cd-S complexation. The Langmuir and pseudo second-order models fitted best for the batch adsorption experiments results. The adsorption capacity of MoS₂@MBC (139 mg g^-1 on the basis of the Langmuir model) was 7.81 times higher than that of pristine biochar. The adsorption process was found to be pH-dependent. The experimental results indicated that MoS₂@MBC is an effective adsorbent for removing Cd(II) from water solutions. Further, the adsorption process involved the complexation of Cd(II) with oxygen-based functional groups, ion exchange, electrostatic attraction, Cd(II)-π interactions, metal-sulfur complexation, and inner-surface complexation. This work provides new insights into the Cd(II) ions removal from water via adsorption. It also demonstrates that MoS₂@MBC is an efficient and economic adsorbent to treat Cd(II)-contaminated water.

Green synthesis of a novel Mn-Zn ferrite/biochar composite from waste batteries and pine sawdust for Pb2+ removal

Magnetic ferrite/biochar composites are a kind of promising adsorbents due to their high adsorption efficiency and facile magnetic separation; however, their synthesis is associated with high cost and secondary environmental impacts. In this study, a novel Mn-Zn ferrite/biochar composite (MZF-BC) is synthesized via a green two-step biocheaching and hydrothermal method using waste batteries and pine sawdust. Characterization results indicate that the introduced Mn-Zn ferrite particles are successfully embedded and coated on biochar (BC), and synthesized MZF-BC₅₀ with 50% BC content exhibits best performance with a specific surface area of 138.5 m² g^-1, the saturation magnetization of 27.5 emu g^-1 and CEC value of 53.2 mmol 100 g^-1. The maximum adsorption capacity of Pb²⁺ is 99.5 mg g^-1 based on the Langmuir sorption isotherm study at 298 K, and pseudo-second-order model accurately describes the adsorption process. Regeneration test suggests that MZF-BC₅₀ can be efficiently reused for 6 cycles. In addition, it exhibits a good selective Pb²⁺ and Cd²⁺ removal performance in lead-acid battery wastewater. The results illustrate that this newly developed material has low cost and rapid remediation of Pb²⁺ as good application potential.

Efficient removal of tetrabromobisphenol A (TBBPA) using sewage sludge-derived biochar: Adsorptive effect and mechanism

Sewerage sludge-derived biochars (SSDBCs) with high adsorption capacity and excellent recyclability were synthesized to remove tetrabromobisphenol A (TBBPA) in aqueous system. Scanning electron microscopy, elemental mapping via energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy were used to characterize the morphology, composition, and microstructures. The maximum adsorption capacity of SSDBCs was about 87.02 mg g^-1 at 303 K and pH 7.5. The Langmuir isotherm demonstrated that the adsorption was mainly homogeneous and chemical processes. The kinetics of TBBPA removal well fitted the second-order dynamic model. Thermodynamic analysis showed that the adsorption was exothermic. The effect of π-π dispersive force and hydrogen bonding was proven as the main adsorption mechanism. Multiple cycle runs experiment revealed the excellent stability of recycled SSDBCs. This work provided a promising method of sludge resourceful treatment using an efficient, economic, cyclic, and convenient material for typical organic contaminant in the environment.