Nano-magnetite supported by biochar pyrolyzed at different temperatures as hydrogen peroxide activator: Synthesis mechanism and the effects on ethylbenzene removal

The effect of UV365/Fenton process on the removal of gaseous ethylbenzene in a bubble column reactor

As volatile organic compounds (VOCs), gaseous ethylbenzene has adverse effects on human health and ecology. Therefore, an effective degradation process is highly desirable. The Fenton process under UV 365 nm was selected as the first option to remove gaseous ethylbenzene in a bubble column reactor. The main parameters for the batch experiments were systematically studied, including H2O2 concentration, [H2O2]/[Fe2+], pH, UV wavelength, UV intensity, gaseous ethylbenzene concentration, gas flow rate, and process stability towards removal efficiency. The optimum conditions were found to be H2O2 concentration of 100 mmol·L-1, [H2O2]/[Fe2+] of 4, pH of 3.0, UV wavelength of 365 nm, UV power of 5 W, gas flow rate of 900 mL·min-1, and gaseous ethylbenzene concentration of 30 ppm, resulting in a removal efficiency of 76.3%. The study found that the Fenton process, when coupled with UV 365 nm, was highly effective in removing gaseous ethylbenzene. The degradation mechanism of gaseous ethylbenzene was proposed in the UV365/Fenton process based on EPR, radical quenching experiments, iron analysis, carbon balance, and GC-MS analysis. The results indicated that •OH played a crucial role in the process.

Optimized carbonization of coffee shell via response surface methodology: A circular economy approach for environmental remediation

The disposal of coffee shell waste on farmland, is a common practice that can causing the environmental and waste valuable resources. Carbonization has been identified as an effective method for transforming coffee shells into useful products that mitigate environmental pollution. Through the response surface methodology, the carbonization conditions of the coffee shells were optimized and its potential as a biochar-based slow-release urea fertilizer was explored. Experiments were conducted on coffee shell performance under varying carbonization conditions such as temperature (600-1000 °C), time (1-5 h), and heating rate (5-20 °C/min). The results indicated that the ideal urea adsorption was 56.3 mg/g, achieved under carbonization conditions of 2.83 h, 809 °C, and 15.3 °C/min. The optimal nutrient release rate within seven days was 45.4% under carbonization conditions of 3.19 h, 813 °C, and 15.0 °C/min. The infrared spectroscopy analysis indicates that carbonization conditions influenced the absorption peak intensity of coffee shell biochar, while the functional group types remain unchanged. The biochar exhibits diverse functional groups and abundant pores, making it a promising candidate for use as a biochar-based fertilizer material. Overall, the findings demonstrate an effective waste management approach that significantly reduces environmental pollutants while remediating pollution.

Biochar-Derived Persistent Free Radicals: A Plethora of Environmental Applications in a Light and Shadows Scenario

Biochar (BC) is a carbonaceous material obtained by pyrolysis at 200-1000 °C in the limited presence of O2 from different vegetable and animal biomass feedstocks. BC has demonstrated great potential, mainly in environmental applications, due to its high sorption ability and persistent free radicals (PFRs) content. These characteristics enable BC to carry out the direct and PFRs-mediated removal/degradation of environmental organic and inorganic contaminants. The types of PFRs that are possibly present in BC depend mainly on the pyrolysis temperature and the kind of pristine biomass. Since they can also cause ecological and human damage, a systematic evaluation of the environmental behavior, risks, or management techniques of BC-derived PFRs is urgent. PFRs generally consist of a mixture of carbon- and oxygen-centered radicals and of oxygenated carbon-centered radicals, depending on the pyrolytic conditions. Here, to promote the more productive and beneficial use of BC and the related PFRs and to stimulate further studies to make them environmentally safer and less hazardous to humans, we have first reviewed the most common methods used to produce BC, its main environmental applications, and the primary mechanisms by which BC remove xenobiotics, as well as the reported mechanisms for PFR formation in BC. Secondly, we have discussed the environmental migration and transformation of PFRs; we have reported the main PFR-mediated application of BC to degrade inorganic and organic pollutants, the potential correlated environmental risks, and the possible strategies to limit them.

N,S-codoped biochar outperformed N-doped biochar on co-activation of H2O2 with trace dissolved Fe(Ⅲ) for enhanced oxidation of organic pollutants

Co-activation of H2O2 with biochar and iron sources together provides an attractive strategy for efficient removal of refractory pollutants, because it can solve the problems of slow Fe(Ⅱ) regeneration in Fenton/Fenton-like processes and of low •OH yield in biochar-activated process. In this study, a wood-derived biochar (WB) was modified by heteroatom doping for the objective of enhancing its reactivity toward co-activation of H2O2. The performance of the co-activated system using doped biochars and trace dissolved Fe(Ⅲ) on oxidation of organic pollutants was evaluated for the first time. The characterizations using X-ray photoelectron spectroscopy (XPS), Raman spectra and electrochemical analyses indicate that heteroatom doping introduced more defects in biochar and improved its electron transfer capacity. The oxidation experiments show that heteroatom doping improved the performance of biochar in the co-activated process, in which the N,S-codoped biochar (NSB) outperformed the N-doped biochar (NB) on oxidation of pollutants. The reaction rate constant (kobs) for oxidation of sulfadiazine in NSB + Fe + H2O2 is 2.25 times that in NB + Fe + H2O2, and is 72.9 times that in the Fenton-like process without biochar, respectively. The mechanism investigations indicate that heteroatom doping enhanced biochar's reactivity on catalyzing the decomposition of H2O2 and on reduction of Fe(Ⅲ) due to the improved electron transfer/donation capacity. In comparison with N-doping, N,S-codoping provided additional electron donor (thiophenic C-S-C) for faster regeneration of Fe(Ⅱ) with less amount of doping reagent used. Furthermore, co-activation with NSB maintained to be efficient at a milder acidic pH than Fenton/Fenton-like processes, and can be used for oxidation of different pollutants and in real water. Therefore, this research provides a novel, sustainable and cost-efficient method for oxidation of refractory pollutants.

Magnetic Biochar Obtained by Chemical Coprecipitation and Pyrolysis of Corn Cob Residues: Characterization and Methylene Blue Adsorption

Biochar is a carbonaceous and porous material with limited adsorption capacity, which increases by modifying its surface. Many of the biochars modified with magnetic nanoparticles reported previously were obtained in two steps: first, the biomass was pyrolyzed, and then the modification was performed. In this research, a biochar with Fe₃O₄ particles was obtained during the pyrolysis process. Corn cob residues were used to obtain the biochar (i.e., BCM) and the magnetic one (i.e., BCM_Fe). The BCM_Fe biochar was synthesized by a chemical coprecipitation technique prior to the pyrolysis process. The biochars obtained were characterized to determine their physicochemical, surface, and structural properties. The characterization revealed a porous surface with a 1013.52 m²/g area for BCM and 903.67 m²/g for BCM_Fe. The pores were uniformly distributed, as observed in SEM images. BCM_Fe showed Fe₃O₄ particles on the surface with a spherical shape and a uniform distribution. According to FTIR analysis, the functional groups formed on the surface were aliphatic and carbonyl functional groups. Ash content in the biochar was 4.0% in BCM and 8.0% in BCM_Fe; the difference corresponded to the presence of inorganic elements. The TGA showed that BCM lost 93.8 wt% while BCM_Fe was more thermally stable due to the inorganic species on the biochar surface, with a weight loss of 78.6%. Both biochars were tested as adsorbent materials for methylene blue. BCM and BCM_Fe obtained a maximum adsorption capacity (q_m) of 23.17 mg/g and 39.66 mg/g, respectively. The obtained biochars are promising materials for the efficient removal of organic pollutants.

Enhanced degradation of organic contaminants using catalytic activity of carbonaceous structures: A strategy for the reuse of exhausted sorbents

Generation of hydroxyl radicals (⋅OH) is the basis of advanced oxidation process (AOP). This study investigates the catalytic activity of microporous carbonaceous structure for in-situ generation of ⋅OH radicals. Biochar (BC) was selected as a representative of carbon materials with a graphitic structure. The work aims at assessing the impact of BC structure on the activation of H₂O₂, the reinforcement of the persistent free radicals (PFRs) in BC using heavy metal complexes, and the subsequent AOP. Accordingly, three different biochars (raw, chemically- and physiochemically-activated BCs) were used for adsorption of two metal ions (nickel and lead) and the degradation of phenol (100 mg/L) through AOP. The results demonstrated four outcomes: (1) The structure of carbon material, the identity and the quantity of the metal complexes in the structure play the key roles in the AOP process. (2) the quantity of PFRs on BC significantly increased (by 200%) with structural activation and metal loading. (3) Though the Pb-loaded BC contained a larger quantity of PFRs, Ni-loaded BC exhibited a higher catalytic activity. (4) The degradation efficiency values for phenol by modified biochar in the presence of H₂O₂ was 80.3%, while the removal efficiency was found to be 17% and 22% in the two control tests, with H₂O₂ (no BC) and with BC (no H₂O₂), respectively. Overall, the work proposes a new approach for dual applications of carbonaceous structures; adsorption of metal ions and treatment of organic contaminants through in-situ chemical oxidation (ISCO).

High-efficiency electro-catalytic performance of green dill biochar cathode and its application in electro-Fenton process for the degradation of pollutants

Biochar (BC) is a kind of carbon-rich, renewable and low-cost material, which can be prepared from various organic materials.

Recent Advances in Magnetic Nanoparticles and Nanocomposites for the Remediation of Water Resources

Water resources are of extreme importance for both human society and the environment. However, human activity has increasingly resulted in the contamination of these resources with a wide range of materials that can prevent their use. Nanomaterials provide a possible means to reduce this contamination, but their removal from water after use may be difficult. The addition of a magnetic character to nanomaterials makes their retrieval after use much easier. The following review comprises a short survey of the most recent reports in this field. It comprises five sections, an introduction into the theme, reports on single magnetic nanoparticles, magnetic nanocomposites containing two of more nanomaterials, magnetic nanocomposites containing material of a biologic origin and finally, observations about the reported research with a view to future developments. This review should provide a snapshot of developments in what is a vibrant and fast-moving area of research.