Visible light driven Ti3+ self-doped TiO2 for adsorption-photocatalysis of aqueous U(VI)

Emerging Nanomaterials toward Uranium Extraction from Seawater: Recent Advances and Perspectives

Nuclear energy holds great potential to facilitate the global energy transition and alleviate the increasing environmental issues due to its high energy density, stable energy output, and carbon-free emission merits. Despite being limited by the insufficient terrestrial uranium reserves, uranium extraction from seawater (UES) can offset the gap. However, the low uranium concentration, the complicated uranium speciation, the competitive metal ions, and the inevitable marine interference remarkably affect the kinetics, capacity, selectivity, and sustainability of UES materials. To date, massive efforts have been made with varying degrees of success to pursue a desirable UES performance on various nanomaterials. Nevertheless, comprehensive and systematic coverage and discussion on the emerging UES materials presenting the fast-growing progress of this field is still lacking. This review thus challenges this position and emphatically focuses on this topic covering the current mainstream UES technologies with the emerging UES materials. Specifically, this review elucidates the causality between the physiochemical properties of UES materials induced by the intellectual design strategies and the UES performances and further dissects the relationships of materials-properties-activities and the corresponding mechanisms in depth. This review is envisaged to inspire innovative ideas and bring technical solutions for developing technically and economically viable UES materials.

A review of remediation technologies for uranium-contaminated water

Uranium is a naturally existing radioactive element present in the Earth's crust. It exhibits lithophilic characteristics, indicating its tendency to be located near the surface of the Earth and tightly bound to oxygen. It is ecotoxic, hence the need for its removal from the aqueous environment. This paper focuses on the variety of water treatment processes for the removal of uranium from water and this includes physical (membrane separation, adsorption and electrocoagulation), chemical (ion exchange, photocatalysis and persulfate reduction), and biological (bio-reduction and biosorption) approaches. It was observed that membrane filtration and ion exchange are the most popular and promising processes for this application. Membrane processes have high throughput but with the challenge of high power requirements and fouling. Besides high pH sensitivity, ion exchange does not have any major challenges related to its application. Several other unique observations were derived from this review. Chitosan/Chlorella pyrenoidosa composite adsorbent bearing phosphate ligand, hydroxyapatite aerogel and MXene/graphene oxide composite has shown super-adsorbent performance (>1000 mg/g uptake capacity) for uranium. Ultrafiltration (UF) membranes, reverse osmosis (RO) membranes and electrocoagulation have been observed not to go below 97% uranium removal/conversion efficiency for most cases reported in the literature. Heat persulfate reduction has been explored quite recently and shown to achieve as high as 86% uranium reduction efficiency. We anticipate that future studies would explore hybrid processes (which are any combinations of multiple conventional techniques) to solve various aspects of the process design and performance challenges.

The Underlying Catalytic Role of Oxygen Vacancies in Fatty Acid Methyl Esters Ketonization over TiOx Catalysts

Recently, interest in converting bio-derived fatty acid methyl esters (FAMEs) into added-value products has significantly increased. The selectivity of ketonization reaction in the conversion of the FAMEs has significantly hampered the efficiency of this process. Herein, this work reports the preparation of catalysts with different levels of oxygen vacancies while the crystal phase remained unchanged. The catalyst with the highest level of oxygen vacancy exhibited the maximum selectivity. The density functional theory (DFT) simulation showed an increase in interatomic distances leading to the formation of frustrated Lewis pairs (FLPs) upon the creation of oxygen vacancies. The surface measurements, type and density of acid sites of the catalysts, showed that the Lewis acid sites enhanced the selectivity for ketone production; while Bronsted acid sites increased the formation of by-products. Moreover, the ketone formation rate was directly proportional to acid density. The findings of this research provide a different approach for catalyst design, based on defects engineering and their effect on the surface activity, which could be used for enhancing the catalytic performance of novel metal oxides.

Porphyrin-based hydrogen-bonded organic framework for visible light driven photocatalytic removal of U(VI) from real low-level radioactive wastewater

The reduction of soluble U(VI) to insoluble U(IV) precipitates by visible light is an environmentally friendly and highly effective strategy to remove uranium from uranium-containing radioactive wastewater. Herein, a porous hydrogen-bonded organic framework (HOF) of UPC-H4a was self-assembled by intermolecular hydrogen bonds of 5,10,15,20-tetra(4-(2,4-diaminotriazine)phenyl) porphyrin to remove U(VI) from aqueous solution. UPC-H4a has high crystallinity with permanent porosity, excellent photocatalytic property, good chemical stability, and strong photocatalytic reducibility. The experiments showed that UPC-H4a removed 98.18% of U(VI) after illumination for 120 min, with high selectivity, strong ion interference resistance, and good reusability. A real low-level radioactive wastewater was employed to estimate the potential of UPC-H4a for practical application and its removal rate can reach 66.14% in the presence of redox competing metal ions, exhibiting great potential for practical application. The DFT calculations and EPR spectra revealed that a more negative electrostatic potential of DAT-porphyrin and the formed intermolecular hydrogen bonds in UPC-H4a can facilitate the participation of photogenerated electrons in the O2/∙O2- reaction, and the radical of ∙O2- was proved to be the critical participant in U(VI) photoreduction. The discovery of UPC-H4a in this work will help to develop more potential applications of HOFs as photocatalysts in radioactive wastewater treatment.

Black TiO2 Photoanodes for Direct Methanol Photo Fuel Cells

Photocatalytic fuel cells (PFCs) are considered the next generation of energy converter devices, since they can harvest solar energy through relatively low-cost semiconductor material to convert the chemical energy of renewable fuels and oxidants directly into electricity. Here, we report black TiO2 nanoparticle (NP) photoanodes for simple single-compartment PFCs and microfluidic photo fuel cells (μPFCs) fed by methanol. We show that Ti3+ and oxygen vacancy (OV) defects at the TiO2 NPs are easily controlled by annealing in a NaBH4-containing atmosphere. This optimized noble-metal-free black TiO2 photoanode shows superior PFC performance for methanol oxidation and O2 reduction with a maximum power density (Pmax) ∼2000% higher compared to the undoped TiO2. At flow conditions, the black TiO2 photoanode showed a Pmax ∼90 times higher than the μFC equipped with regular TiO2 in the dark. The PFC and μPFC operate spontaneously with little activation polarization, and black TiO2 photoanodes are stable under light irradiation. The improved photoactivity of the black TiO2 photoanode is a consequence of the self-doping with Ti3+/OV defects, which significantly red-shifted the bandgap energy, induced intragap electronic states, and widened both the valence band and conduction band, enhancing the overall absorption of visible light and decreasing the interfacial charge transfer resistance.

Advanced Photocatalytic Uranium Extraction Strategies: Progress, Challenges, and Prospects

Nuclear energy with low carbon emission and high-energy density is considered as one of the most promising future energy sources for human beings. However, the use of nuclear energy will inevitably lead to the discharge of nuclear waste and the consumption of uranium resources. Therefore, the development of simple, efficient, and economical uranium extraction methods is of great significance for the sustainable development of nuclear energy and the restoration of the ecological environment. Photocatalytic U(VI) extraction technology as a simple, highly efficient, and low-cost strategy, received increasing attention from researchers. In this review, the development background of photocatalytic U(VI) extraction and several photocatalytic U(VI) reduction mechanisms are briefly described and the identification methods of uranium species after photocatalytic reduction are addressed. Subsequently, the modification strategies of several catalysts used for U(VI) extraction are summarized and the advantages and disadvantages of photocatalytic U(VI) extraction are compared. Additionally, the research progress of photocatalytic technology for U(VI) extraction in actual uranium-containing wastewater and seawater are evaluated. Finally, the current challenges and the developments of photocatalytic U(VI) extraction technology in the future are prospected.

A highly sensitive and selective photoelectrochemical aptasensor for atrazine based on Au NPs/3DOM TiO2 photonic crystal electrode

A photoelectrochemical (PEC) sensing platform with high sensitivity and selectivity has been fabricated based on Au nanoparticles (Au NPs) modified three dimensionally ordered macroporous (3DOM) TiO₂ nanostructure frame for trace detection of an endocrine disrupting pesticide, atrazine (ATZ). The resultant photoanode (Au NPs/3DOM TiO₂) shows enhanced PEC performance under visible light due to multi signal amplification of the unique structure of 3DOM TiO₂ and surface plasmon resonance (SPR) of Au NPs. ATZ aptamers are used as recognition elements and immobilized on Au NPs/3DOM TiO₂ by Au-S bond in large packing density and dominant spatial orientation. The specific recognition and high binding affinity between aptamer and ATZ provides the PEC aptasensor with excellent sensitivity. The detection limit is 0.167 ng/L. Besides, this PEC aptasensor exhibits outstanding anti-interference ability in 100-fold concentration of other endocrine disrupting compounds and has been applied successfully to analyze ATZ in real water samples. A simple but efficient PEC aptasensing platform has therefore been successfully developed with high sensitivity, selectivity and repeatability for pollutant monitoring and potential risk evaluation in the environment with great application prospect.

Ultra-fast uranium capture via the synergistic interaction of the intrinsic sulfur atoms and the phosphoric acid groups adhered to edge sulfur of MoS2

In order to deal with the sudden nuclear leakage event to suppress the spread of radioactive contaminants in a short period of time, it is extremely urgent needed to explore an adsorbent that could be capable of in-situ remedial actions to rapidly capture the leaked radionuclides in split second. An adsorbent was developed that MoS₂ via ultrasonic to expose more surface defects afterwards functionalized by phosphoric acid resulting in more active sites being endowed on the edge S atoms of Mo-vacancy defects, while simultaneously increased the hydrophilicity and interlayer spacing. Hence, an overwhelming fast adsorption rates (adsorption equilibrium within 30 s) are presented and place the MoS₂-PO₄ at the top of performing sorbent materials. Moreover, the maximum capacity calculated from Langmuir model is as high as 354.61 mg·g^-1, the selective adsorption capacity (S_U) achieving 71.2% in the multi-ion system and with more than 91% capacity retention after 5 cycles of recycling. Finally, XPS and DFT insight into the adsorption mechanism, which can be explained as interaction of UO₂²⁺ on the surface of MoS₂-PO₄ by forming U-O and U-S bonds. The successful fabrication of such a material may provide a promising solution for emergency treatment of radioactive wastewater during nuclear leakage events.

A simple nanocomposite photocatalyst HT-rGO/TiO2 for deoxynivalenol degradation in liquid food

A simple nanocomposite photocatalyst HT-rGO/TiO₂ for deoxynivalenol (DON) degradation was synthesized by hydrothermal method to maintain the quality of cereal grains and byproducts. The characterization of HT-rGO/TiO₂ was analyzed by XRD, FTIR, Raman spectroscopy, and XPS. Moreover, according to UV-vis DRS analysis, HT-rGO/TiO₂ had a smaller band gap, indicating a wider response range to light and a higher utilized rate of quantum photons. Additionally, the results of LC-MS showed that the hydroxyl group at the C3 position, and the unsaturated bond between C9 and C10, and the epoxy group at C12 and C13 positions of DON molecule were destroyed step by step by photocatalytic degradation. These groups have active effects on the DON toxicity, which means it is successful to degrade DON in liquid-food by HT-rGO/TiO₂ photocatalyst.

New Strategy for the Persistent Photocatalytic Reduction of U(VI): Utilization and Storage of Solar Energy in K+ and Cyano Co-Decorated Poly(Heptazine Imide)

The photocatalytic conversion of soluble U(VI) into insoluble U(IV) is a robust strategy to harvest aqueous uranium, but remains challenging owing to the intermittent availability of solar influx and reoxidation of U(IV) without illumination. Herein, a dual platform based on K+ and cyano group co-decorated poly(heptazine imide) (K-CN-PHI) is reported that can drive persistent U(VI) extraction upon/beyond light. K-CN-PHI achieves the photocatalytic reduction of U(VI) with a reaction rate of 0.89 min-1 , being 47 times greater than that over pristine carbon nitride (PCN). This system can further be triggered by light to form long-living radicals, driving the reduction of U(VI) in the dark for over 3 d. The flexible structural K+ as counterions stabilize the electrons trapped by cyanamide groups, enabling the long lifetime of the generated radicals. The results collectively prove K-CN-PHI to be a novel and efficient photocatalyst enabling persistent U(VI) extraction around the clock, and broadening the practical applications of the photocatalytic extraction of U(VI).

Uranium extraction from seawater: material design, emerging technologies and marine engineering

Uranium extraction from seawater (UES), a potential approach to securing the long-term uranium supply and sustainability of nuclear energy, has experienced significant progress in the past decade. Promising adsorbents with record-high capacities have been developed by diverse innovative synthetic strategies, and scale-up marine field tests have been put forward by several countries. However, significant challenges remain in terms of the adsorbents' properties in complex marine environments, deployment methods, and the economic viability of current UES systems. This review presents an up-to-date overview of the latest advancements in the UES field, highlighting new insights into the mechanistic basis of UES and the methodologies towards the function-oriented development of uranium adsorbents with high adsorption capacity, selectivity, biofouling resistance, and durability. A distinctive emphasis is placed on emerging electrochemical and photochemical strategies that have been employed to develop efficient UES systems. The most recent achievements in marine tests by the major countries are summarized. Challenges and perspectives related to the fundamental, technical, and engineering aspects of UES are discussed. This review is envisaged to inspire innovative ideas and bring technical solutions towards the development of technically and economically viable UES systems.

MIL-100(Fe)/g-C3N4 composites with enhanced photocatalytic activity for UO22+ reduction under visible light

As a clean energy source, nuclear energy can gradually replace traditional fossil energy sources, and is an important means to achieve the "double carbon goal". Uranium-containing wastewater is inevitable in the development of nuclear energy. The composites MIL/CNx of MOF material MIL-100(Fe) and carbon nitride (CN) were obtained by a simple solvo-thermal method using iron nitrate, homophthalic acid and CN. The material MIL-100(Fe) with high specific surface area was compounded with CN to increase the in-plane adsorption sites, which could adsorb 30% of uranium in solution during the dark reaction. The close interfacial contact of the two materials effectively inhibited the complexation of photo-generated electrons and holes and promotes electron migration. These two synergistic effects improved their overall photocatalytic reduction capacity, which could reduce 97% of UO₂²⁺ in solution in 20 min. The UO₂²⁺ removal efficiency of MIL/CN_0.1 was 2.3 and 1.6 times higher than that of CN and MIL-100(Fe), respectively. In addition, MIL/CN_0.1 was stable in reducing uranium during the five cycles of the experiment.

Oxygen-containing groups in cellulose and lignin biochar: their roles in U(VI) adsorption

The adsorption behaviors of cellulose and lignin biochar depend on the evolution of their oxygen-containing groups to some extent. In this study, cellulose-rich pakchoi and lignin-rich corncob were selected to prepare the pyrolytic biochar at variable temperatures, named PBC and CBC, respectively. Their structure-function relationships were in-depth studied via the combination of the adsorption experiments of U(VI) and comprehensive spectral analyses. The maximal adsorption capacity of PBC 300, obtained at 300 °C, was measured as 46.62 mg g^-1 for U(VI), which was ⁓1.3 times higher than 35.60 mg g^-1 of CBC 300. U(VI) adsorption on PBC and CBC were predominantly ascribed to the coordination interaction between oxygen-containing groups and U(VI). Interestingly, the main complexation groups were distinct in both biochars due to the different inherent evolutions of cellulose and lignin. Volatile d-glucose chains in cellulose were apt to degrade rapidly, and the formed carboxyls acted as the most important sites in PBC. However, the stable aromatic network in lignin led to a slow degradation, and more hydroxyls thus remained in CBC, which controlled U(VI) adsorption. In this study, we obtained greatly cost-effective adsorbents of U(VI) and provided some essential insights into understanding the structural evolution-function relationship of cellulose and lignin biochar.

Efficient charge separation in sulfur doped AgFeO2 photocatalyst for enhanced photocatalytic U(VI) reduction: The role of doping and mechanism insights

Photocatalytic reduction of U(VI) in aqueous solutions has been considered as an efficient and promising technology to solve radioactive U pollution. In this work, density functional theory (DFT) calculations were firstly employed to optimize and compare the adsorption configurations combined uranium with four given photocatalysts, then their adsorption energies were - 0.97 eV for AgFeO₂, - 1.15 eV for Zn doped AgFeO₂, - 1.73 eV for Cu doped AgFeO₂ and - 2.66 eV for S doped AgFeO₂, respectively, indicating the sulfur doping plays a major role in U(VI) photoreduction. Herein, a visible light responsive efficient sulfur doped AgFeO₂ photocatalyst (S doped AgFeO₂) was synthesized and utilized to photocatalytic reduction of U(VI) in aqueous solutions. According to XRD, XPS and TEM analysis, the sulfur was successfully doped in AgFeO₂ via the hydrothermal method. The batch experimental showed that S doping enhanced the U(VI) photoreduction activity of AgFeO₂, and the S-AFO-3 photocatalyst exhibited the highest photocatalytic activity (92.57%), which was 1.5 times than that of pure AgFeO₂. ESR, PL and DFT results demonstrated that the enhancement of adsorbed U(VI) photoreduction was attributed to the own unique effect of oxygen vacancy defects and efficient charge separation of S doped AgFeO₂ photocatalyst. Due to its higher adsorption energies, fast-U(VI) photoreduction rate and superior chemical stability, the sulfur doped AgFeO₂ photocatalyst is hoped for water remediation containing U(VI) wastewater.

MXene-Derived 3D Defect-Rich TiO2@Reduced Graphene Oxide Aerogel with Ultrafast Carrier Separation for Photo-Assisted Uranium Extraction: A Combined Batch, X-ray Absorption Spectroscopy, and Density Functional Theory Calculations

Encapsulation of nano-semiconductor materials in three-dimensional (3D) adsorbents to build a typical semiconductor-adsorbent heterostructure is a forward-looking strategy for photo-assisted uranium extraction. Here, we develop 3D MXene-derived TiO₂(M)@reduced graphene oxide (RGO) aerogel for photo-assisted uranium extraction. Theoretical simulations demonstrate that oxygen vacancies on TiO₂(M) tailor the energy level structure and enhance the electron accumulation at gap states of TiO₂(M), thereby further realizing the spatial separation efficiency of electron-hole pairs by the Schottky junction. By virtue of the in situ X-ray photoelectron spectroscopy spectrum, we identify that photogenerated electrons generated over TiO₂(M) were transferred to graphene oxide aerogel by the Schottky junction. Accordingly, TiO₂ (M)@RGO aerogel presents a considerable removal efficiency for U(VI) with a removal ratio of 95.7%. Relying on the X-ray absorption spectroscopy technique, we distinguish the evolution of 2H₂O-2O_ax-U-5O_eq into H₂O-2O_ax-U-3O_eq from dark to light conditions, further confirming the reduction of high-valent uranium. This strategy may open a paradigm for developing novel heterojunctions as photocatalysts for selective U(VI) extraction.

A critical review of uranium contamination in groundwater: Treatment and sludge disposal

Dissolved uranium in groundwater at high concentrations is an emerging global threat to human and ecological health due to its radioactivity and chemical toxicity. Uranium can enter groundwater by geochemical reactions, natural deposition from minerals, mining, uranium ore processing, and spent fuel disposal. Although much progress has been made in uranium remediation in recent years, most published reviews on uranium treatment have focused on specific methods, particularly adsorption. This article systematically reviews the major treatment technologies, explains their mechanism and progress of uranium removal, and compares their performance under various environmental conditions. Of all treatment methods, adsorption has received much attention due to its ease of use and adaptability under various conditions. However, salinity and competition from other ions limit its application in actual field conditions. Biosorption and bioremediation are also promising methods due to their low-cost and chemical-free operation. Strong base anion exchange resins are more effective at typical groundwater pH conditions. Advanced oxidation processes like photocatalysis produce less sludge and are effective even at low uranium concentrations. Electrocoagulation shows significantly improved performance when organic ligands are added prior to treatment. The significant advantages of membrane filtration are high removal efficiency and the ability to recover uranium. While each technology has its merits and demerits, no single technology is entirely suitable under all conditions. One major area of concern with all technologies is the need to dispose of liquid and solid waste generated after treatment safely. Future research must focus on developing hybrid and state-of-the-art technologies for effective and sustainable uranium removal from groundwater. Developing holistic management strategies for uranium removal will hinge on understanding its speciation, mechanisms of fate and transport, and socio-economic conditions of the affected areas.

Stepwise assembly and reversible structural transformation of ligated titanium coated bismuth-oxo cores: shell morphology engineering for enhanced chemical fixation of CO2

Herein, we report the stepwise assembly and reversible transformation of atomically precise ligated titanium coated bismuth-oxide core nanostructures. The soluble and stable Bi38O45@Ti6-oxo clusters with weakly coordinated surface salicylate ligands were first prepared as precursors. Owing to the high surface reactivity of the Bi38O45 inner core, its shell composition and morphology could be systemically modified by assembly with various Ti ions and auxiliary ligands (L), especially those with different flexibility, bridging ability and steric hindrance. As a result, a series of new core-shell Bi38O44/45@Ti x L-oxo (x = 14, 16, 18 or 20) clusters containing gradually increasing shell Ti atoms were successfully synthesized. Among them, the Bi38Ti20-oxo cluster is the largest one in the family of heterometallic Bi/Ti-oxo clusters to date. In addition, the sensitized titanium outer shell can effectively improve the photocurrent response under visible light irradiation. More remarkably, the obtained core-shell Bi38O44/45@Ti x L-oxo clusters can serve as stable and efficient catalysts for CO2 cycloaddition with epoxides under ambient conditions, whose activity was significantly influenced by the outer ligated titanium shell structure. This work provides a new insight into the construction of atomically precise heterometallic core-shell nanostructures and also an interesting shell engineering strategy for tuning their physicochemical properties.

Light Promotes the Immobilization of U(VI) by Ferrihydrite

The environmental behaviors of uranium closely depend on its interaction with natural minerals. Ferrihydrite widely distributed in nature is considered as one main natural media that is able to change the geochemical behaviors of various elements. However, the semiconductor properties of ferrihydrite and its impacts on the environmental fate of elements are sometimes ignored. The present study systematically clarified the photocatalysis of U(VI) on ferrihydrite under anaerobic and aerobic conditions, respectively. Ferrihydrite showed excellent photoelectric response. Under anaerobic conditions, U(VI) was converted to U(IV) by light-irradiated ferrihydrite, in the form of UO2+x (x < 0.25), where •O2− was the dominant reactive reductive species. At pH 5.0, ~50% of U(VI) was removed after light irradiation for 2 h, while 100% U(VI) was eliminated at pH 6.0. The presence of methanol accelerated the reduction of U(VI). Under aerobic conditions, the light illumination on ferrihydrite also led to an obvious but slower removal of U(VI). The removal of U(VI) increased from ~25% to 70% as the pH increased from 5.0 to 6.0. The generation of H2O2 under aerobic conditions led to the formation of UO4•xH2O precipitates on ferrihydrite. Therefore, it is proved that light irradiation on ferrihydrite significantly changed the species of U(VI) and promoted the removal of uranium both under anaerobic and aerobic conditions.

Introduction of cation vacancies and iron doping into TiO2 enabling efficient uranium photoreduction

The reduction of U(VI) to U(IV) in wastewater by semiconductor photocatalysis has become a new highly efficient and low-cost method for U(VI) removal. However, due to the weak absorption of visible light led by wide band gap and low carrier utilization rate resulted from the severe electron-holes recombination, the photoreduction performance of U(VI) is limited. Herein, the Ti vacancies and doped Fe atoms were simultaneously introduced into TiO₂ nanosheet (labeled as 4%Fe-Ti_1-xO₂) as a highly active and stable catalysis for U(VI) photoreduction. Without adding any hole sacrifice agent, 4%Fe-Ti_1-xO₂ nanosheets achieved 99.7% removal efficiency for U(VI) within 120 min. And the 92.1% removal efficiency of U(VI) via 4%Fe-Ti_1-xO₂ nanosheets was still maintained after 5 cycles. Moreover, 4%Fe-Ti_1-xO₂ exhibited dramatic removal rate, 81.6% U(VI) in the solution was removed in 10 min. Further study on the mechanism showed that simultaneously introducing the Ti vacancies and doped Fe atoms in 4%Fe-Ti_1-xO₂ nanosheets improved the visible light utilization and decreased the recombination of photogenerated electron-hole pairs, contributing to the highly efficiency removal of U(VI).

Ilmenite Alteration and Its Adsorption and Catalytic Reduction in U Enrichment in Sandstone-Hosted U Deposits from the Northern Ordos Basin, North China

Detrital ilmenite and its altered minerals are common in sandstone-hosted U deposits in the northern Ordos Basin, north China. Petrographic observation, SEM-EDS, EMPA, and LA-MC-ICP-MS were utilized to characterize the spatial relationship between altered ilmenite and the U minerals, and to investigate the U enrichment mechanism and alteration processes of ilmenite. Ilmenite was completely or partially altered to leucoxene and anatase along its rim and crack in ore-bearing sandstone. Framboidal and cement pyrite of BSR and TSR origin were identified around altered ilmenite. Two U phases closely related to altered ilmenite contain Ti-coffinite (I) and coffinite (II). These data indicate that ilmenite alteration and the associated processes of U enrichment can be divided into two stages. Stage one involves U pre-enrichment and adsorption, with stage two involving U enrichment via TiO2 (leucoxene and anatase) catalytic reduction. Ilmenite was altered into porous leucoxene that can adsorb U as uraniferous leucoxene and Ti-coffinite (I) and framboidal pyrite directly by reactions with H2S, produced by sulfate-reducing bacteria during synsedimentary and early diagenesis stages. Altered ilmenite can enrich U in the form of coffinite (II) through a catalytic reduction reaction which is triggered by β and γ radiation produced by previously adsorbed U during the uplift of ore-bearing bed in the Late Cretaceous period. In addition, cement pyrite can also reduce U6+ into U4+ which deposits on its surface in the form of coffinite (II). These results demonstrate a new mechanism, mediated by adsorption and catalytic reduction, to enrich U in sandstone-hosted U deposits.

Synthesis and Characterization of Carbon and Carbon-Nitrogen Doped Black TiO2 Nanomaterials and Their Application in Sonophotocatalytic Remediation of Treated Agro-Industrial Wastewater

The conventional open ponding system employed for palm oil mill agro-effluent (POME) treatment fails to lower the levels of organic pollutants to the mandatory standard discharge limits. In this work, carbon doped black TiO₂ (CB-TiO₂) and carbon-nitrogen co-doped black TiO₂ (CNB-TiO₂) were synthesized via glycerol assisted sol-gel techniques and employed for the remediation of treated palm oil mill effluent (TPOME). Both the samples were anatase phase, with a crystallite size of 11.09–22.18 nm, lower bandgap of 2.06–2.63 eV, superior visible light absorption ability, and a high surface area of 239.99–347.26 m²/g. The performance of CNB-TiO₂ was higher (51.48%) compared to only (45.72%) CB-TiO₂. Thus, the CNB-TiO₂ is employed in sonophotocatalytic reactions. Sonophotocatalytic process based on CNB-TiO₂, assisted by hydrogen peroxide (H₂O₂), and operated at an ultrasonication (US) frequency of 30 kHz and 40 W power under visible light irradiation proved to be the most efficient for chemical oxygen demand (COD) removal. More than 90% of COD was removed within 60 min of sonophotocatalytic reaction, producing the effluent with the COD concentration well below the stipulated permissible limit of 50 mg/L. The electrical energy required per order of magnitude was estimated to be only 177.59 kWh/m³, indicating extreme viability of the proposed process for the remediation of TPOME.

Carbon materials for extraction of uranium from seawater

With the rapid growth of population and industrialization, the energy crisis and environmental pollution as two main difficulties urgently need to be solved nowadays. The development and utilization of nuclear energy is of great significance for solving energy support, national security and environmental protection. As the raw material of nuclear energy, a lot of uranium in seawater provide a guarantee for the sustainable and green development of nuclear power plants. Recently, various new carbon-based materials (e.g., carbon nanofibers, multiwalled carbon nanotube, graphene) have been attracted widely intense interest in extraction of uranium from seawater due to large specific surface area, excellent acid-base resistance, high adsorption performance, environmental friendly and low cost. Thus, the systematic reviews concerning the extraction of uranium from seawater on various carbon-based materials were highly desirable. In this review, the extraction methods of uranium from seawater, including electrochemical, photocatalytic and adsorption methods are briefly introduced. Then the application and mechanism of four generation carbon-based materials on the extraction of uranium from seawater are systematically reviewed in details. Finally, the current challenges and future trends of uranium extraction from seawaters are proposed. This review provides the guideline for designing carbon-based materials with high adsorption capacity and exceptional selectivity for U(VI) extraction from seawater.

The preparation of three-dimensional flower-like TiO2/TiOF2 photocatalyst and its efficient degradation of tetracycline hydrochloride

A kind of high-efficiency photocatalyst of the three-dimensional flower-like TiO2/TiOF2 was synthesized by a one-step hydrothermal method. XRD, FE-SEM, EDS, HTEM, BET, XPS, PL, and UV-Vis-DRS were utilized to characterize the photocatalyst. The photocatalyst of TiO2/TiOF2 shows a narrow band gap of 2.8 eV. The generation of Ti3+ and an oxygen vacancy (Ov) in the photocatalyst are helpful to increase the absorption of visible light, and to inhibit faster charge recombination by capturing photogenerated carriers. Through the degradation of tetracycline hydrochloride (TCH) under simulated sunlight, the photocatalytic activity and stability of the synthesized samples were investigated. The results showed that the removal rate of tetracycline hydrochloride was 59% only in 0.5 h of dark reaction and 85% in 0.5 h of simulated sunlight. The removal efficiency of the photocatalyst for the adsorption and photocatalytic degradation of TCH is higher than that of the single TiO2, TiOF2, and Degussa P25. The synthesized three-dimensional flower-like TiO2/TiOF2 has great application potential in the treatment of antibiotic wastewater.

Efficient Photocatalytic Extraction of Uranium over Ethylenediamine Capped Cadmium Sulfide Telluride Nanobelts

The photocatalysts for hexavalent uranium (U(VI)) reduction suffered from the low uranium uptake capacity and weak long-wavelength light absorption. Herein, we synthesized the CdS_xTe_1-x nanobelts capped by ethylenediamine (EDA), which provided amino groups as the adsorption sites. With the increase of the Te content, the amino groups on the CdS_xTe_1-x nanobelts decreased because of the variation of the electron density of Cd²⁺, whereas the light adsorption was enhanced due to the narrowed bandgap. In photocatalytic reduction of U(VI), the CdS_0.95Te_0.05-EDA nanobelts exhibited a considerable U(VI) removal ratio of 97.4% with a remarkable equilibrium U(VI) extraction amount on per weight unit of the adsorbent (q_e) of 836 mg/g. The bandgap structure and Fourier transform infrared spectroscopy (FT-IR) spectra analysis revealed that the optimum photocatalytic activity of CdS_xTe_1-x nanobelts was achieved at a 5% of Te^2- doping, which balanced the factors of amino groups and bandgap. This adsorption-photoreduction process offers an ultrahigh uranium extraction capacity over wide uranium concentrations.

Advantageous Role of Ir0 Supported on TiO2 Nanosheets in Photocatalytic CO2 Reduction to CH4: Fast Electron Transfer and Rich Surface Hydroxyl Groups

Ir-based heterogeneous catalysts for photocatalytic CO₂ reduction have rarely been reported and are worthy of investigation. In this work, TiO₂ nanosheets with a higher specific surface area and more oxygen vacancies were employed to support Ir metal by impregnation (Imp) and ethylene glycol (EG) reduction methods. In comparison with Ir/TiO₂ (Imp) and TiO₂, Ir/TiO₂ (EG) exhibited excellent photocatalytic performance toward CO₂ reduction, especially for CH₄ production on account of the oxygen defect of TiO₂ and rich surface hydroxyl groups produced from the interaction between TiO₂ nanosheets and metallic Ir. In situ ESR suggested that the oxygen defect was significant for CO₂ adsorption/activation. Furthermore, metallic Ir was beneficial for photogenerated electron transfer, surface hydroxyl generation, and adsorption of the CO intermediate, generating more available electrons and reducing agents for CH₄ production. In situ CO₂ DRIFTS confirmed the key synergistic interaction between the oxygen defect and metallic Ir in the photoreduction from CO₂ to CH₄.

Optimization of N doping in TiO2 nanotubes for the enhanced solar light mediated photocatalytic H2 production and dye degradation

Herein, we report the optimization of nitrogen (N) doping in TiO₂ nanotubes to achieve the enhanced photocatalytic efficiencies in degradation of dye and H₂ gas evolution under solar light exposure. TiO₂ nanotubes have been produced via hydrothermal process and N doping has been tuned by varying the concentration of urea, being the source for N, by solid-state dispersion process. The structural analysis using XRD showed the characteristic occupancy of N into the structure of TiO₂ and the XPS studies showed the existence of Ti-N-Ti network in the N-doped TiO₂ nanotubes. The obtained TEM images showed the formation of 1D tube-like structure of TiO₂. Diffuse reflectance UV-Vis absorption spectra demonstrated that the N-doped TiO₂ nanotubes can efficiently absorb the photons of UV-Vis light of the solar light. The optimized N-doped TiO₂ nanotubes (TiO₂ nanotubes vs urea @ 1:1 ratio) showed the highest degradation efficiency over methyl orange dye (∼91% in 90 min) and showed the highest rate of H₂ evolution (∼19,848 μmol h^-1.g^-1) under solar light irradiation. Further, the recyclability studies indicated the excellent stability of the photocatalyst for the durable use in both the photocatalytic processes. The observed efficiency was ascribed to the optimized doping of N-atoms into the lattices of TiO₂, which enhanced the optical properties by forming new energy levels of N atoms near the valence band maximum of TiO₂, thereby increased the overall charge separation and recombination resistance in the system. The improved reusability of photocatalyst is attributed to the doping-induced structural stability in N-doped TiO₂. From the observed results, it has been recognized that the established strategy could be promising for synthesizing N-doped TiO₂ nanotubes with favorable structural, optical and photocatalytic properties towards dye degradation and hydrogen production applications.

Recent Developments of Advanced Ti3+-Self-Doped TiO2 for Efficient Visible-Light-Driven Photocatalysis

Research into the development of efficient semiconductor photocatalytic materials is a promising approach to solving environmental and energy problems worldwide. Among these materials, TiO2 photocatalysts are one of the most commonly used due to their efficient photoactivity, high stability, low cost and environmental friendliness. However, since the UV content of sunlight is less than 5%, the development of visible light-activated TiO2-based photocatalysts is essential to increase the solar energy efficiency. Here, we review recent works on advanced visible light-activated Ti3+-self-doped TiO2 (Ti3+–TiO2) photocatalysts with improved electronic band structures for efficient charge separation. We analyze the different methods used to produce Ti3+–TiO2 photocatalysts, where Ti3+ with a high oxygen defect density can be used for energy production from visible light. We categorize advanced modifications in electronic states of Ti3+–TiO2 by improving their photocatalytic activity. Ti3+–TiO2 photocatalysts with large charge separation and low recombination of photogenerated electrons and holes can be practically applied for energy conversion and advanced oxidation processes in natural environments and deserve significant attention.

Graphitic carbon nitride-based materials for photocatalytic reduction of U(vi)

This work reports the photocatalytic reduction of U(vi) using g-C₃N₄-based materials and discusses the factors affecting the photocatalytic reduction of U(vi).