Bioconversion of agro-industry sourced biowaste into biomaterials via microbial factories - A viable domain of circular economy

Investigating chemical pre-treatment methods: Valorization of wheat straw to enhance polyhydroxyalkanoate (PHA) production with novel isolate Bacillus paranthracis RSKS-3

Wheat is a crucial food crop worldwide, generating straw upon post-harvest. The straw is often burned to enhance soil fertility, leading to massive air pollution. In this study, wheat straw was investigated for the production of Polyhydroxyalkanoate (PHA) using the novel isolate Bacillus paranthracis RSKS-3. The wheat straw was pulverized and valorized with different acids (2 % and 4 % H2SO4, acetic acid, and hydrochloric acid) and alkalis (2 % and 4 % NaOH, calcium carbonate, and potassium hydroxide). The validation of carbohydrates was done using the Molisch test by analyzing purple-ring production and the DNS test which concluded 4 % H2SO4 as an effective treatment with a maximal sugar yield of 5.04 mg/mL at P < 0.05. The bioconversion efficiency of the extract to PHA resulted in 0.87 g/L by Bacillus paranthracis RSKS-3, later characterized by Ultraviolet (UV)-spectroscopy and FT-IR assessment. The findings of the research offer a potential strategy to mitigate airborne pollutants that result from smouldering wheat straw, thereby contributing significant improvements to sustainable development.

Use of acetate as substrate for sustainable production of homoserine and threonine by Escherichia coli W3110: A modular metabolic engineering approach

Acetate, a promising yet underutilized carbon source for biological production, was explored for the efficient production of homoserine and threonine in Escherichia coli W. A modular metabolic engineering approach revealed the crucial roles of both acetate assimilation pathways (AckA/Pta and Acs), optimized TCA cycle flux and glyoxylate shunt activity, and enhanced CoA availability, mediated by increased pantothenate kinase activity, for efficient homoserine production. The engineered strain W-H22/pM2/pR1P exhibited a high acetate assimilation rate (5.47 mmol/g cell/h) and produced 44.1 g/L homoserine in 52 h with a 53% theoretical yield (0.18 mol/mol) in fed-batch fermentation. Similarly, strain W-H31/pM2/pR1P achieved 45.8 g/L threonine in 52 h with a 65% yield (0.22 mol/mol). These results represent the highest reported levels of amino acid production using acetate, highlighting its potential as a valuable and sustainable feedstock for biomanufacturing.

Waste-derived nanobiochar: A new avenue towards sustainable agriculture, environment, and circular bioeconomy

The greatest challenge for the agriculture sector in the twenty-first century is to increase agricultural production to feed the burgeoning global population while maintaining soil health and the integrity of the agroecosystem. Currently, the application of biochar is widely implemented as an effective means for boosting sustainable agriculture while having a negligible influence on ecosystems and the environment. In comparison to traditional biochar, nano-biochar (nano-BC) boasts enhanced specific surface area, adsorption capacity, and mobility properties within soil, allowing it to promote soil properties, crop growth, and environmental remediation. Additionally, carbon sequestration and reduction of methane and nitrous oxide emissions from agriculture can be achieved with nano-BC applications, contributing to climate change mitigation. Nonetheless, due to cost-effectiveness, sustainability, and environmental friendliness, waste-derived nano-BC may emerge as the most viable alternative to conventional waste management strategies, contributing to the circular bioeconomy and the broader goal of achieving the Sustainable Development Goals (SDGs). However, it's important to note that research on nano-BC is still in its nascent stages. Potential risks, including toxicity in aquatic and terrestrial environments, necessitate extensive field investigations. This review delineates the potential of waste-derived nano-BC for sustainable agriculture and environmental applications, outlining current advancements, challenges, and possibilities in the realms from a sustainability and circular bioeconomy standpoint.

Agro-waste to sustainable energy: A green strategy of converting agricultural waste to nano-enabled energy applications

The rising demands of the growing population have raised two significant global challenges viz. energy crisis and solid-waste management, ultimately leading to environmental deterioration. Agricultural waste (agro-waste) contributes to a large amount of globally produced solid waste, contaminating the environment, and raising human-health issues on improper management. It is essential for a circular economy to meet sustainable development goals and to design strategies to convert agro-waste into energy using nanotechnology-based processing strategies, by addressing the two significant challenges. This review illustrates the nano-strategic aspects of state-of-the-art agro-waste applications for energy harvesting and storage. It details the fundamentals related to converting agro-waste into energy resources in the form of green nanomaterials, biofuels, biogas, thermal energy, solar energy, triboelectricity, green hydrogen, and energy storage modules in supercapacitors and batteries. Besides, it highlights the challenges associated with agro-waste-to-green energy modules with their possible alternate solutions and advanced prospects. This comprehensive review will serve as a fundamental structure to guide future research on smart agro-waste management and nanotechnological innovations dedicated to its utilization for green energy applications without harming the environment. The nanomaterials assisted generation and storage of energy from agro-waste is touted to be the near-future of smart solid-waste management strategy for green and circular economy.

Polysaccharides for Medical Technology: Properties and Applications

Over the past decade, the use of polysaccharides has gained tremendous attention in the field of medical technology. They have been applied in various sectors such as tissue engineering, drug delivery system, face mask, and bio-sensing. This review article provides an overview and background of polysaccharides for biomedical uses. Different types of polysaccharides, for example, cellulose and its derivatives, chitin and chitosan, hyaluronic acid, alginate, and pectin are presented. They are fabricated in various forms such as hydrogels, nanoparticles, membranes, and as porous mediums. Successful development and improvement of polysaccharide-based materials will effectively help users to enhance their quality of personal health, decrease cost, and eventually increase the quality of life with respect to sustainability.

Biosorbent Based on Poly(vinyl alcohol)-Tricarboxi-Cellulose Designed to Retain Organic Dyes from Aqueous Media

Methylene Blue, a cationic dye, was retained from aqueous solutions using a novel biosorbent made of poly(vinyl alcohol) reticulated with tricarboxi-cellulose produced via TEMPO oxidation (OxC25). The study of the Methylene Blue biosorption process was performed with an emphasis on operational parameters that may have an impact on it (such as biosorbent concentration, pH of the aqueous media, and temperature). The current study focused on three areas: (i) the physic-chemical characterization of the biosorbent (scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX)); (ii) biosorption data modeling to determine the quantitative characteristic parameters employing three equilibrium isotherms (Langmuir, Freundlich, and Dubinin-Radushkevich-DR); and (iii) the study of temperature influence. The results of the study showed that the Langmuir model provided a good fit for the experimental data of biosorption, realizing a maximum capacity of 806.45 mg/g at 20 °C. The free energy of biosorption (E) evaluated by the DR equation was in the range of 6.48-10.86 KJ/mol. The values of the thermodynamic parameters indicated an endothermic process because the free Gibbs energy ranged from -9.286 KJ/mol to -2.208 KJ/mol and the enthalpy was approximately -71.686 KJ/mol. The results obtained encourage and motivate the further study of this biosorption process by focusing on its kinetic aspects, establishing the biosorption's controlled steps, identifying the mechanism responsible for the retention of textile dyes presented in moderate concentration in aqueous media, and studying the biosorption process in a dynamic regime with a view to applying it to real systems.

Biowastes for biodegradable bioplastics production and end-of-life scenarios in circular bioeconomy and biorefinery concept

Due to global urbanization, industrialization, and economic development, biowastes generation represents negative consequences on the environment and human health. The use of generated biowastes as a feedstock for biodegradable bioplastic production has opened a new avenue for environmental sustainability from the circular (bio)economy standpoint. Biodegradable bioplastic production can contribute to the sustainability pillars (environmental, economic, and social). Furthermore, bioenergy, biomass, and biopolymers production after recycling of biodegradable bioplastic can help to maintain the energy-environment balance. Several types of biodegradable bioplastic, such as starch-based, polyhydroxyalkanoates, polylactic acid, and polybutylene adipate terephthalate, can achieve this aim. In this review, an overview of the main biowastes valorization routes and the main biodegradable bioplastic types of production, application, and biodegradability are discussed to achieve the transition to the circular economy. Additionally, end-of-life scenarios (up-cycle and down-cycle) are reviewed to attain the maximum environmental, social, and economic benefit from biodegradable bioplastic products under biorefinery concept.

Green extraction of bioactive components from carrot industry waste and evaluation of spent residue as an energy source

Carrot processing industries produce 25-30% of waste in the form of carrot rejects, peels, and pomace which contain a large amount of high-value bioactive components. Green extraction of the bioactive components from carrot rejects with green solvents using closed-vessel energy-intensive microwave-assisted extraction was the objective of this work. In this work, three experimental studies were implemented. One uses 8 different green solvents for maximum yield of bioactive using green technology, and the other for the optimization of Microwave-assisted Extraction (MAE) parameters to enhance the bioactive components yield. Response Surface Methodology was employed to optimize the processing parameters including temperature, time, solid to solvent ratio, and solvent type. The optimized extraction conditions: treatment temperature of 50 °C for 5 min gave a significantly higher yield of total carotenoids (192.81 ± 0.32 mg carotenoids/100 g DW), total phenolic (78.12 ± 0.35 g GAE/100 g DW), and antioxidants by FRAP (5889.63 ± 0.47 mM TE/100 g DW), ABTS (1143.65 ± 0.81 mM TE/100 g DW), and DPPH (823.14 ± 0.54 mM TE/100 g DW) using a solvent combination of hexane and ethanol (1:3) with solid to solvent ratio of 1:40 (w/v). This green technology in combination with GRAS solvents promoted the best recovery of bioactive from carrot rejects. Moreover, the solid residue remained after the extraction of bioactive components exhibited higher carbon content (46.5%) and calorific value (16.32 MJ/kg), showcasing its potential to be used as an energy source.

Inhibitory Effect of Biotransformed-Fucoidan on the Differentiation of Osteoclasts Induced by Receptor for Activation of Nuclear Factor-κB Ligand

Bone homeostasis is regulated by constant remodeling through osteogenesis by osteoblasts and osteolysis by osteoclasts and osteoporosis can be provoked when this balance is broken. Present pharmaceutical treatments for osteoporosis have harmful side effects and thus, our goal was to develop therapeutics from intrisincally safe natural products. Fucoidan is a polysaccharide extracted from many species of brown seaweed, with valuable pharmaceutical activities. To intensify the effect of fucoidan on bone homeostasis, we hydrolyzed fucoidan using AMG, Pectinex and Viscozyme. Of these, fucoidan biotransformed by Pectinex (Fu/Pec) powerfully inhibited the induction of tartrate-resistant acid phosphatase (TRAP) activity in osteoclasts differentiated from bone marrow macrophages (BMMs) by the receptor for activation of nuclear factor-κB ligand (RANKL). To investigate potential of lower molecular weight fucoidan it was separated into >300 kDa, 50-300 kDa, and <50 kDa Fu/Pec fractions by ultrafiltration system. The effects of these fractions on TRAP and alkaline phosphatase (ALP) activities were then examined in differentiated osteoclasts and MC3T3-E1 osteoblasts, respectively. Interestingly, 50-300 kDa Fu/Pec suppressed RANKL-induced osteoclasts differentiation from BMMs but did not synergistically enhance osteoblasts differentiation induced by osteogenic agents. In addition, this fraction inhibited the expressions of NFATc1, TRAP, OSCAR, and RANK, which are all key transcriptional factors involved in osteoclast differentiation, and those of Src, c-Fos and Mitf, as determined by RT-PCR. In conclusion, enzymatically low-molecularized 50-300 kDa Fu/Pec suppressed TRAP by downregulating RANKL-related signaling, contributing to the inhibition of osteoclasts differentiation, and represented a potential means of inducing bone remodeling in the background of osteoporosis.

Surface Modification of Sponge-like Porous Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/Gelatine Blend Scaffolds for Potential Biomedical Applications

In this study, we described the preparation of sponge-like porous scaffolds that are feasible for medical applications. A porous structure provides a good microenvironment for cell attachment and proliferation. In this study, a biocompatible PHA, poly(3-hydroxybutyrate-co-4-hydroxybutyrate) was blended with gelatine to improve the copolymer’s hydrophilicity, while structural porosity was introduced into the scaffold via a combination of solvent casting and freeze-drying techniques. Scanning electron microscopy results revealed that the blended scaffolds exhibited higher porosity when the 4HB compositions of P(3HB-co-4HB) ranged from 27 mol% to 50 mol%, but porosity decreased with a high 4HB monomer composition of 82 mol%. The pore size, water absorption capacity, and cell proliferation assay results showed significant improvement after the final weight of blend scaffolds was reduced by half from the initial 0.79 g to 0.4 g. The pore size of 0.79g-(P27mol%G10) increased three-fold while the water absorption capacity of 0.4g-(P50mol%G10) increased to 325%. Meanwhile, the cell proliferation and attachment of 0.4g-(P50mol%G10) and 0.4g-(P82mol%G7.5) increased as compared to the initial seeding number. Based on the overall data obtained, we can conclude that the introduction of a small amount of gelatine into P(3HB-co-4HB) improved the physical and biological properties of blend scaffolds, and the 0.4g-(P50mol%G10) shows great potential for medical applications considering its unique structure and properties.

Detoxification of lignocellulosic prehydrolyzate by lignin nanoparticles prepared from biorefinery biowaste to improve the ethanol production

This study proposed a recyclable p-toluenesulfonic acid (p-TsOH) fractionation process for co-producing lignin nanoparticles (LNPs) and fermentable sugars from lignocellulosic biorefinery biowaste (enzymatic hydrolysis residue (EHR)). The prepared LNPs were used to detoxify the inhibitors in the xylose-rich prehydrolyzate for improving ethanol production. Results showed that the EHR was fractionated into a cellulose-rich water-insoluble solid (WIS) fraction and a lignin-rich spent liquor (SL) fraction. Cellulase hydrolysis of WIS produced 97.7% of glucose yield, while the LNPs of an average particle size of 98.0 nm with 76.3 % yield (based on the untreated EHR) were obtained from the diluted SL. LNPs demonstrated higher detoxification ability than EHR at the same dosage. Moreover, the fermentability of the detoxified xylose-rich prehydrolyzate was significantly improved. The sugar utilization ratio was 94.8%, and the ethanol yield reached its peak value of 85.4% after 36 h of fermenting the detoxified xylose-rich prehydrolyzate.

Valorization of agro-industrial biowaste to green nanomaterials for wastewater treatment: Approaching green chemistry and circular economy principles

Water pollution is one of the most critical issues worldwide and is a priority in all scientific agendas. Green nanotechnology presents a plethora of promising avenues for wastewater treatment. This review discusses the current trends in the valorization of zero-cost, biodegradable, and readily available agro-industrial biowaste to produce green bio-nanocatalysts and bio-nanosorbents for wastewater treatment. The promising roles of green bio-nanocatalysts and bio-nanosorbents in removing organic and inorganic water contaminants are discussed. The potent antimicrobial activity of bio-derived nanodisinfectants against water-borne pathogenic microbes is reviewed. The bioactive molecules involved in the chelation and tailoring of green synthesized nanomaterials are highlighted along with the mechanisms involved. Furthermore, this review emphasizes how the valorization of agro-industrial biowaste to green nanomaterials for wastewater treatment adheres to the fundamental principles of green chemistry, circular economy, nexus thinking, and zero-waste manufacturing. The potential economic, environmental, and health impacts of valorizing agro-industrial biowaste to green nanomaterials are highlighted. The challenges and future outlooks for the management of agro-industrial biowaste and safe application of green nanomaterials for wastewater treatment are summarized.

Surface Modified Activated Carbons: Sustainable Bio-Based Materials for Environmental Remediation

Global warming and water/air contamination caused by human activities are major challenges in environmental pollution and climate change. The improper discharge of a large amount of agro-forest byproduct is accelerating these issues mainly in developing countries. The burning of agricultural byproducts causes global warming, whereas their improper waste management causes water/air pollution. The conversion of these waste materials into effective smart materials can be considered as a promising strategy in waste management and environmental remediation. Over the past decades, activated carbons (ACs) have been prepared from various agricultural wastes and extensively used as adsorbents. The adsorption capacity of ACs is linked to a well-developed porous structure, large specific surface area, and rich surface functional moieties. Activated carbon needs to increase their adsorption capacity, especially for specific adsorbates, making them suitable for specific applications, and this is possible by surface modifications of their surface chemistry. The modifications of surface chemistry involve the introduction of surface functional groups which can be carried out by various methods such as acid treatment, alkaline treatment, impregnation, ozone treatment, plasma treatment, and so on. Depending on the treatment methods, surface modification mainly affects surface chemistry. In this review, we summarized several modification methods for agricultural-waste-based ACs. In addition, the applications of AC for the adsorption of various pollutants are highlighted.

Anaerobic Digestion of Agri-Food Wastes for Generating Biofuels

Presently, fossil fuels are extensively employed as major sources of energy, and their uses are considered unsustainable due to emissions of obnoxious gases on the burning of fossil fuels, which can lead to severe environmental complications, including human health. To tackle these issues, various processes are developing to waste as a feed to generate eco-friendly fuels. The biological production of fuels is considered to be more beneficial than physicochemical methods due to their environmentally friendly nature, high rate of conversion at ambient physiological conditions, and less energy-intensive. Among various biofuels, hydrogen (H₂) is considered as a wonderful due to high calorific value and generate water molecule as end product on the burning. The H₂ production from biowaste is demonstrated, and agri-food waste can be potentially used as a feedstock due to their high biodegradability over lignocellulosic-based biomass. Still, the H₂ production is uneconomical from biowaste in fuel competing market because of low yields and increased capital and operational expenses. Anaerobic digestion is widely used for waste management and the generation of value-added products. This article is highlighting the valorization of agri-food waste to biofuels in single (H₂) and two-stage bioprocesses of H₂ and CH₄ production.

Fostering Awareness on Environmentally Sustainable Technological Solutions for the Post-Harvest Food Supply Chain

This study presents a current status and future trends of innovative and environmentally sustainable technological solutions for the post-harvest food supply chain and the food industry, in terms of ecological packaging, active, and/or intelligent packaging. All these concerns are currently highlighted due to the strong increase in the purchase/sale of products on online platforms, as well as the requirements for stricter food security and safety. Thus, this study aims to increase the global awareness of agro-industrial micro, small, and medium size enterprises for the adoption of innovative food solutions though industry digitalization (Industry 4.0), associated logistics and circular economy, with a concern for cybersecurity and products information, communication and shelf-life extension. The adoption of these guidelines will certainly foster along the complete food chain (from producer to consumer, with all intermediary parties) the awareness on environmentally sustainable technological solutions for the post-harvest food supply chain, and thus, promoting the future food sustainability required by the population increase, the climate change, the exodus of rural population to urban areas, and food loss and waste.

Transformation of Biowaste for Medical Applications: Incorporation of Biologically Derived Silver Nanoparticles as Antimicrobial Coating

Nanobiotechnology has undoubtedly influenced major breakthroughs in medical sciences. Application of nanosized materials has made it possible for researchers to investigate a broad spectrum of treatments for diseases with minimally invasive procedures. Silver nanoparticles (AgNPs) have been a subject of investigation for numerous applications in agriculture, water treatment, biosensors, textiles, and the food industry as well as in the medical field, mainly due to their antimicrobial properties and nanoparticle nature. In general, AgNPs are known for their superior physical, chemical, and biological properties. The properties of AgNPs differ based on their methods of synthesis and to date, the biological method has been preferred because it is rapid, nontoxic, and can produce well-defined size and morphology under optimized conditions. Nevertheless, the common issue concerning biological or biobased production is its sustainability. Researchers have employed various strategies in addressing this shortcoming, such as recently testing agricultural biowastes such as fruit peels for the synthesis of AgNPs. The use of biowastes is definitely cost-effective and eco-friendly; moreover, it has been reported that the reduction process is simple and rapid with reasonably high yield. This review aims to address the developments in using fruit- and vegetable-based biowastes for biologically producing AgNPs to be applied as antimicrobial coatings in biomedical applications.