Efficient antimony removal by self-assembled core-shell nanocomposite of Co3O4@rGO and the analysis of its adsorption mechanism

Cellulose nanocrystal-infused polymer hydrogel imbued with ferric-manganese oxide nanoparticles for efficient antinomy removal

Antimony is a highly poisonous pollutant that needs to be removed from water to ensured safety. In this work, we have fabricated a novel adsorbent, the ferric-manganese oxide (FeMnOx) nanoparticles embedded cellulose nanocrystal-based polymer hydrogel (FeMnOx @CNC-g-PAA/qP4VP, denoted as FMO@CPqP), specifically engineered for the remediation of antimony-laden water. Comprehensive evaluations have been conducted to investigate the efficacy of the FMO@CPqP hydrogel in removal of antimony from water. The hydrogel exhibits superior affinity for antimony, with maximum adsorption capacities of 276.1 mg/g for Sb(III) and 286.8 mg/g for Sb(V). The adsorptive dynamics, governed by the kinetics and isotherm analyses, elucidate that the immobilization of both Sb(III) and Sb(V) is facilitated through a homogeneous and monolayer chemisorption mechanism. The hydrogel has a three-dimensional interconnected porous structure and exhibits good swelling behavior, which facilitates the rapid absorption of antimony ions by this high surface area hydrogel into the channels. Furthermore, various effects, including the oxidation and inner-sphere coordination mediated by FeMnOx NPs and the electrostatic attractions of the quaternized P4VP chains, promote the immobilization of antimony species. Owing to its high removal efficiency, stability and reusability, the FMO@CPqP hydrogel emerges as an exemplary candidate for the removal of antimony contaminants in water treatment processes.

Facile synthesis of Bi3O(OH)(AsO4)2 and simultaneous photocatalytic oxidation and adsorption of Sb(III) from wastewater

Antimony (Sb) decontamination in water is necessary owing to the worsening pollution which seriously threatens human life safety. Designing bismuth-based photocatalysts with hydroxyls have attracted growing interest because of the broad bandgap and enhanced separation efficiency of photogenerated electron/hole pairs. Until now, the available photocatalysis information regarding bismuth-based photocatalysts with hydroxyls has remained scarce and the contemporary report has been largely limited to Bi3O(OH)(PO4)2 (BOHP). Herein, Bi3O(OH)(AsO4)2 (BOHAs), a novel ultraviolet photocatalyst, was fabricated via the co-precipitation method for the first time, and developed to simultaneous photocatalytic oxidation and adsorption of Sb(III). The rate constant of Sb(III) removal by the BOHAs was 32.4, 3.0, and 4.3 times higher than those of BiAsO4, BOHP, and TiO2, respectively, indicating that the introduction of hydroxyls could increase the removal of Sb(III). Additionally, the crucial operational parameters affecting the adsorption performance (catalyst dosage, concentration, pH, and common anions) were investigated. The BOHAs maintained 85% antimony decontamination of the initial yield after five successive cycles of photocatalysis. The Sb(III) removal involved photocatalytic oxidation of adsorbed Sb(III) and subsequent adsorption of the yielded Sb(V). With the acquired knowledge, we successfully applied the photocatalyst for antimony removal from industrial wastewater. In addition, BOHAs could also be powerful photocatalysts in the photodegradation of organic pollutants studies of which are ongoing. It reveals an effective strategy for synthesizing bismuth-based photocatalysts with hydroxyls and enhancing pollutants' decontamination.

Unveiling interfacial interaction between antimony oxyanions and boehmite nanorods: Spectroscopic evidence and density functional theory analysis

In natural environments, the fate and migratory behavior of metalloid contaminants such as antimony (Sb) significantly depend on the interfacial reactivity of mineral surfaces. Although boehmite (γ-AlOOH) is widely observed in (sub)surface environments, its underlying interaction mechanism with Sb oxyanions at the molecular scale remains unclear. Considering Sb-contaminated environmental conditions in this study, we prepared boehmite under weakly acidic conditions for use in the systematic investigation of interfacial interactions with Sb(III) and Sb(V). The as-synthesized boehmite showed a nanorod morphology and comprised four crystal facets in the following order: 48.4% (010), 27.1% (101), 15.0% (001), and 9.5% (100). The combined results of spectroscopic analyses and theoretical calculations revealed that Sb(III) formed hydrogen bonding outer-sphere complexation on the (100), (010), and (001) facets and that Sb(V) preferred to form bidentate inner-sphere complexation via mononuclear edge-sharing configuration on the (100), (001), and (101) facets and binuclear corner-sharing configuration on the (010) facet. These findings indicate that the facet-mediated thermodynamic stability of the surface complexation determines the interaction affinity toward the Sb species. This work is the first to document the contribution of boehmite to (sub)surface media, improving the ability to forecast the fate and behavior of Sb oxyanions at mineral-water interfaces.

Rational Design of NiCo-borate/GO Heterojunction as a High-Performance Supercapacitor Electrode

The bottleneck in the preparation of supercapacitors is how to develop high-energy and high-power-density devices by using appropriate materials. Herein, a novel NixCo3-x-B/GO heterostructure material was synthesized through a simple ultrasonic and precipitation method. The prepared NixCo3-x-B/GO heterostructure exhibits significant improvements in supercapacitor performance than NixCo3-x-B. The presence of GO effectively suppresses the excessive growth and accumulation of NixCo3-x-B; therefore, Ni2.7Co0.3-B/GO exhibits the best performance as an electrode material for supercapacitors: a high specific capacitance (Cm, 1789.72 F g-1@1 A g-1) and excellent rate performance. The asymmetric supercapacitor (ASC) device of Ni2.7Co0.3-B/GO//AC exhibits a Cm of 76.6 F g-1@1 A g-1, a large voltage window of 1.6 V, and a high energy density (ED) of 98.0 Wh kg-1. Furthermore, a flexible, all-solid-state supercapacitor assembled with Ni2.7Co0.3-B/GO as both the positive and negative electrodes demonstrates a Cm of 46.9 F g-1@1 A g-1. Even after multiple folding and bending at various angles, the device maintains excellent performance, showcasing remarkable stability. With a power density (PD) of 479.7 W kg-1, the device achieves a high ED of 60.0 Wh kg-1. This work provides valuable insights into the synergistic effects in electrochemical processes based on heterostructure materials.

Superior capacity and easy separation of zirconium functionalized chitosan melamine foam for antimony(III/V) removal

Nowadays, highly toxic antimony has severely posed threat to water sources and jeopardized human health. Fabricating adsorbents with the capability of easy separation, high efficiency and large adsorption capacity remains a major challenge. In this paper, zirconium functionalized chitosan melamine foam (ZCMF) was fabricated with zirconium and chitosan crosslinked onto melamine foam, then utilized for the removal of antimony(III/V) in water. The characterization of SEM and EDS collectively showed that ZCMF has a porous structure which could boost the mass transfer rate and zirconium ions on the surface could provide plentiful active adsorption sites. Systematic adsorption experiments demonstrated that the experimental data of Sb(III) and Sb(V) were consistent with the pseudo-second-order and Elovich kinetic models, respectively, and the Langmuir maximum adsorption capacities were separately 255.35 mg g-1 (Sb(III)) and 414.41 mg g-1 (Sb(V)), which displayed prominent performance among adsorbents derived from biomass. Combining the XPS and FTIR characterization with experimental data, it is rational to speculate that ZCMF could remove Sb from aqueous solution through ligand exchange, electrostatic attraction, and surface complexation mechanisms. ZCMF exhibited excellent performance, including large adsorption capacity, easy separation, facile preparation and eco-friendliness. It could be a promising new adsorbent for the treatment of antimony-containing wastewater.

Intensive adsorption of tetracycline by cobalt oxide quantum dots-loaded mineral carbon

Spent bleaching earth (SBE), a waste by-product produced from the bleaching step of edible oil by montmorillonite clays (bleaching earth), causes serious public health and environmental problems. Accordingly, in this study, SBE was pyrolyzed to yield mineral carbon materials (SBE@C) and cobalt oxide (Co3O4) was loaded to improve the active site of those materials. Due to the carrier function of SBE@C, ultra-fine Co3O4 quantum dots (QDs) (2-6 nm) were homogeneously and robustly immobilized onto SBE@C. The obtained adsorbent exhibited high regeneration performance and an outstanding adsorption capacity (253.36 mg/g). It can be attributed to the surface complexation of cobalt with TC being the dominant process contributing to adsorption behavior. Further, Co3O4 QDs-SBE@C still maintained adequate sorption capacity at a broad range of pH values and in the presence of co-occurring ions. These results suggested the significant application potential of SBE and demonstrated the efficiency of using Co3O4 QDs-SBE@C for wastewater remediation.

Enhance antimony adsorption from aquatic environment by microwave-assisted prepared Fe3O4 nanospherolites

A novel hierarchically nanostructured magnetite (Fe3O4) was manufactured using microwave-assisted reflux method without surfactants. The nanostructured Fe3O4 is formed via the co-precipitation of Fe(III) and Fe(II), followed by a nanocrystal aggregation-based mechanism. Moreover, the effects of solution pH, contact time, initial Sb concentration, coexisting anions, and recycle numbers on the adsorption of nanostructured Fe3O4 toward Sb were extensively examined in the batch adsorption tests. The results demonstrated that the obtained Fe3O4 exhibited excellent adsorption ability toward Sb with the maximum adsorption capacities of 154.2 and 161.1 mg.g-1 for Sb(III) and Sb(V), respectively. The prepared Fe3O4 could be easily regenerated and reused for adsorption/desorption studies multiple times without compromising the Sb adsorption ability. Further exploration indicated that the oxidation or reduction reactions infrequently occurred during Sb adsorption processes. The proposed hierarchically nanostructured Fe3O4 thus could be potentially used for sustainable and efficient antimony removal.

A critical review on adsorptive removal of antimony from waters: Adsorbent species, interface behavior and interaction mechanism

Antimony (Sb) has raised widespread concern because of its negative effects on ecology and human health. The extensive use of antimony-containing products and corresponding Sb mining activities have discharged considerable amounts of anthropogenic Sb into the environment, especially the water environment. Adsorption has been employed as the most effective strategy for Sb sequestration from water; thus, a comprehensive understanding of the adsorption performance, behavior and mechanisms of adsorbents benefits to develop the optimal adsorbent to remove Sb and even drive its practical application. This review presents a holistic analysis of adsorbent species with the ability to remove Sb from water, with a special emphasis on the Sb adsorption behavior of various adsorption materials and their Sb-adsorbent interaction mechanisms. Herein, we summarize research results based on the characteristic properties and Sb affinities of reported adsorbents. Various interactions, including electrostatic interactions, ion exchange, complexation and redox reactions, are fully reviewed. Relevant environmental factors and adsorption models are also discussed to clarify the relevant adsorption processes. Overall, iron-based adsorbents and corresponding composite adsorbents show relatively excellent Sb adsorption performance and have received widespread attention. Sb removal mainly depends on chemical properties of the adsorbent and Sb itself, and complexation is the main driving force for Sb removal, assisted by electrostatic attraction. The future directions of Sb removal by adsorption focus on the shortcomings of current adsorbents; more attention should be given to the practicability of adsorbents and their disposal after use. This review contributes to the development of effective adsorbents for removing Sb and provides an understanding of Sb interfacial processes during Sb transport and the fate of Sb in the water environment.

Immobilization of antimony in soil and groundwater using ferro-magnesium bimetallic organic frameworks

Sb(III) is often detected in contaminated soil and groundwater. Hence, high-efficiency technology is needed. In this study, bimetallic organic frameworks were used for the first time to immobilize Sb(III) from contaminated soil and groundwater. The materials were synthesized by the hydrothermal method. Both ends of the prepared material were hexagonal tip rods, and the length became shorter as the ratio of Fe/Mg decreased. The bimetallic organic framework with a Fe/Mg feeding ratio of 0.5 was the optimum material for Sb(III) removal, which could effectively immobilize Sb(III). The adsorption isotherm was fitted well with the Freundlich model, and the optimal adsorption capacity can reach 106.97 mg/g. The adsorption capacity of 84% can be completed in 10 min, which conformed to the pseudo-second-order kinetics. The Fe³⁺ could enhance the stability of the material, and the Mg²⁺ was conducive to freeing up adsorption sites for binding Sb(III) and forming stable chemical adsorption. Ion exchange is the predominant mechanism to remove Sb(III). After 14 days of remediation of Sb(III) contaminated soil, the Toxicity Characteristic Leaching Procedure (TCLP)-leached concentrations of Sb(III) were reduced by 86%, 91% and 94% when the material dosages were 1%, 2% and 3%, respectively. Immobilization of Sb(III) in soil resulted in a conversion of antimony speciation from more easily bioavailable species to less bioavailable species, further contributing to reduce the environmental risk of antimony. The results indicate that ferro-magnesium bimetallic organic frameworks may serve as a kind of promising materials for the immobilization of Sb(III) in contaminated soil and groundwater.

Removal of Antimony(III) and Antimony(V) from water samples through water-soluble polymer-enhanced ultrafiltration

Addressing antimony (Sb) contamination, which is caused by the use of Sb compounds in various industries, is crucial. This study aims to compare two different Sb removal mechanisms: ion exchange and chelation. Therefore, two different water-soluble polymers-glycidyl methacrylate-N-methyl-D-glucamine and poly 2-(acryloyloxy)ethyl trimethylammonium chloride-were synthesized and used to remove Sb(III) and Sb(V) using the polymer-enhanced ultrafiltration (PEUF) method. The removal of Sb(III) was pH-dependent and extremely difficult at a pH of 1.2. However, when the pH of the solution was increased to 11, the Sb(III) removal rate increased to 77%. The Sb(III) removal rate was 28% at an Sb(III):polymer mole ratio of 1:5, which increased to 77% at a mole ratio of 1:20. Sb(III) removal was discovered to be unaffected by the low concentrations of Na⁺, K⁺, Ca²⁺, and Mg²⁺ ions in the solution, maintaining a Sb(III) removal rate of 77%. The test parameters showed different characteristics for Sb(V) removal. Increasing the pH of the solution from 1 to 9 correspondingly increased the removal rate from 0% to 45%, but increasing it further to 11 decreased the removal rate to 14%. The removal rate of Sb(V) was 67% at a Sb(V):polymer mole ratio of 1:60. Sb(V) removal was discovered to be unaffected by low concentrations of SO₄^2-, NO₃^-, and PO₄^3- anions in the solution. However, notably, the Sb(V) removal rate decreased from 67% to 58% in the presence of Cl^- ions. The results demonstrate that Sb removal via chelation was more effective than by ion exchange, and it remained unaffected by the presence of interfering ions.

Simultaneous removal of Sb(III) and Sb(V) from mining wastewater by reduced graphene oxide/bimetallic nanoparticles

Antimony (Sb) contamination is a significant environmental issue in mining impacted areas, where the use of nanomaterials to remove such metalloid species has attracted much research attention. In this study, the simultaneous removal of Sb(III) and Sb(V) was investigated using a reduced graphene oxide/Fe/Ni (rGO-Fe/Ni NPs) composite. Compared to rGO alone the composite exhibited enhanced removal efficiency. For rGO-Fe/Ni NPs the maximum Sb(III) and Sb(V) adsorption capacities were 2.00 and 1.41 mg·g^-1, respectively, compared to 1.70 and 1.02 mg·g^-1 for Sb(III) and Sb(V), respectively, when using rGO only. This indicated that Fe/Ni enhanced the simultaneous removal of Sb(III) and Sb(V). Advanced characterization via SEM and XPS before and after exposure to Sb indicated that both Sb(III) and Sb(V) were adsorbed on to the surface of rGO-Fe/Ni NPs, followed by oxidation of Sb(III) to Sb(V). Adsorption and oxidation kinetics both conformed to pseudo-second order models, where the mechanism for the simultaneous removal of Sb(III) and Sb(V) by rGO-Fe/Ni NPs involved a combination of both adsorption and oxidation. Moreover, the practical adsorption capacity of rGO-Fe/Ni was not limited to Sb, since in a real mining wastewater; containing a mixture of metal(loid)s, while rGO-Fe/Ni exhibited a Sb adsorption capacity of 1.59 mg·g^-1, it also exhibited similar adsorption capacities for As (2.61 mg·g^-1), Pb (2.41 mg·g^-1), and Cd (1.25 mg·g^-1). The composite was also highly reusable with a removal efficiency for Sb(III) as high as 72.7% after 4 cycles of use. Thus, rGO-Fe/Ni NPs has significant potential for the practical removal of Sb species and other heavy metal(loid)s in mining impacted wastewaters.

Facile preparation of novel magnetic mesoporous FeMn binary oxides from Mn encapsulated carboxymethyl cellulose-Fe(III) hydrogel for antimony removal from water

Effective removal of Sb(III) and Sb(V) has long been an urgent task for protecting human health and environment. In this study, novel magnetic mesoporous FeMn binary oxides (MMFMs) were fabricated via calcinating the Mn encapsulated carboxymethyl cellulose-Fe(III) hydrogel, and the structure of MMFMs were closely related to the Fe:Mn ratio. Owing to the mesoporous structure together with synergistic effect of FeMn binary component, the MMFMs exhibited excellent mass transfer and adsorption ability to Sb(III) and Sb(V). MMFM₃ achieved a maximum Sb(III) and Sb(V) adsorption capacity of 281.5 and 204.6 mg/g, respectively. Co-existing anions of Cl^-, NO₃^- and SO₄^2- exhibited marginal influence on the adsorption for both Sb(III) and Sb(V), except the PO₄^3- for Sb(III) and SiO₃^2- or PO₄^3- for Sb(V). X-ray photoelectron spectroscopic investigation revealed that high valence Mn(IV) was mainly responsible for the oxidation transformation of the highly toxic Sb(III) into less toxic Sb(V), while the FeO_x content played major role for the adsorption of Sb(V). The generated inner-sphere FeOSb complex between Fe-OH groups and Sb(III/V) dominantly contributed to the removal of Sb(III/V). Overall, mesoporous structure, magnetic separation ability, excellent adsorption performance together with exceptional regeneration properties demonstrated the great potential of MMFMs for Sb(III/V) remediation.

Effective adsorption of antimony (V) from contaminated water by a novel composite manganese oxide/oxyhydroxide as an adsorbent

To obtain an efficient and low-cost adsorbent for the Sb(V) removal in Sb(V)-contaminated water, a novel composite manganese oxide/oxyhydroxide (CMO) was synthesized by a simple hydrothermal synthesis method. The synthesized adsorbent was characterized via scanning electron microscopy, X-ray diffraction, transmission electron microscopy, Brunauer-Emmett-Teller surface area, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses. The results revealed that the as-prepared CMO adsorbent possessed a porous structure consisting of Mn₃O₄ nanoparticles and MnOOH nanorods. Batch experiments showed that the adsorption behaviours were well fitted by the Langmuir isotherm and the pseudo-second-order kinetic model, reaching the maximum adsorption capacity of 119.63 mg/g at 25 °C. The application of CMO adsorbent showed that the Sb(V) removal efficiency in 6.24 L Sb(V)-containing water with a concentration of 3.6 mg/L was more than 90%. The reusability of CMO adsorbent demonstrated that the Sb(V) removal efficiency was still more than 80% even after five times of regeneration. The adsorption mechanism for Sb(V) can be described as ligand exchange between hydroxyl groups on the adsorbent surface and hydroxyl groups in Sb(OH)₆^- molecules by forming inner-sphere complexes. Those results suggested that the CMO adsorbent can be considered as a potential adsorbent to remove Sb(V) from contaminated water.

Biochar microtube interconnected hydrotalcite nanosheets for the adsorption of aqueous Sb(III)

Actuated by the non-ionic heavy metal of antimony (Sb) contaminants with undesired toxicity to the environment and human health, capturing Sb is urgent to remedy contaminated water. Herein, the lamellar MnCo hydrotalcite was grown on catkin-derived biochar through the in situ etching of ZIF-L to construct a hierarchical microtube@nanosheet hybrid (CLMH) for Sb immobilization. The adsorption behaviour and mechanism of trivalent antimony (Sb (III)) on the CLMH were investigated. The CLMH shows good pH applicability for capturing Sb(III) at pH from 2 to 9. The excellent adsorption capacity of CLMH for Sb(III) is 247.62 mg g^-1at 303 K, and the endothermic process is proved by the positive value of ΔH0(10.54 kJ mol^-1). The adsorption process is fitted with the intra-particle diffusion model, which can be described with external mass transfer, intraparticle diffusion in pores, and equilibrium stage. The adsorption mechanism is proved, which includes the bind of Metal-O-Sb bonds by inner-sphere complex, the embedding of Sb in the intercalation of hydrotalcite, redox between Mn and Sb, and functional groups dependent anchoring effect. The work benefits the understanding of the antimony removal behaviour over the hierarchical microtube@nanosheet hybrids.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Review of recently used adsorbents for antimony removal from contaminated water

As prior pollutants, antimony (Sb) and its compounds are carcinogenic to threaten human health. With the development of the industry, various Sb-contained pollutants have been released into nature, thus heavily damaging the ecological environment. Effectively treating Sb-polluted waterbodies is very important and have obtained ever-growing attention. In this review, we have summarized and classified the adsorbents used for removing Sb from water in recent two decades as natural and synthetic biological adsorbents, mineral adsorbents, natural and synthetic carbon materials, metal-based adsorbents, and metal-organic frameworks. We focus on the adsorption behavior of various adsorbents for Sb, including adsorption capacity, isotherms, kinetics, thermodynamics, and effects of environmental factors (e.g., pH, coexisting anions, and natural organic matter). Meanwhile, the involved adsorption mechanisms of Sb by different adsorbents are discussed. Finally, we have outlined the development of adsorbents over the last two decades and summarized the performance characteristics of effective adsorbents, such as the rich functional groups on the surface of the adsorbents (i.e., hydroxyl, carboxyl and amino groups), and the presence of metal elements to coordinate with Sb in (i.e., iron and manganese). We hope this review give enlightenment to design adsorbents for effective removal of Sb.

Antimony reduction by a non-conventional sulfate reducer with simultaneous bioenergy production in microbial fuel cells

Environmental toxicity of antimony (Sb) is significantly increased through the widespread industrial application. The extended release of Sb above the regulatory level became a risk to humans habituated in the ecosystem. Conventional methods to remediate Sb demand high energy or resource input, which further leads to secondary pollution. The bio-electrochemical system offers a promising bioremediation strategy to remove or reduce toxic heavy metals. Thus, this research explores the possibilities of simultaneous metal sulfide (MeS) precipitation and electricity production using a full biological Microbial fuel cell (MFC). A non-conventional sulfate-reducing bacteria (SRB) Citrobacter freundii SR10 was used for this investigation, where the MFC was operated for lactate utilization in the bio-anode and Sb reduction at the bio-cathode. This study observed 81% of coulombic efficiency (bio-anode) and 97% of sulfate reduction with 99.3% Sb (V) reduction (bio-cathode), and it was concluded that the MeS precipitation entirely depends on sulfide concentration via SR10 sulfate reduction. The MFC-SR10 offers a maximum power density of 1652.9 ± 32.1 mW/m^3, and their performance was depicted using cyclic voltammetry and electrochemical impedance spectroscopy. The Sb reduction was evaluated through fluorescence spectroscopy, and the Sb (V) MeS precipitation was confirmed as stibnite (Sb₂S₃) by Raman spectroscopy and X-ray photoelectron spectroscopy. Furthermore, the matured anodic and cathodic biofilm formation was confirmed by Scanning electron microscopy with Energy-dispersive X-ray spectroscopy. Thus the MFC with SRB bio-cathode can be used as an alternative to simultaneously remove sulfate and Sb from the wastewater with electricity production.

Removal of antimonite (Sb(III)) from aqueous solution using a magnetic iron-modified carbon nanotubes (CNTs) composite: Experimental observations and governing mechanisms

In this study, a novel nanoscale iron oxide (FeO_x) modified carbon nanotubes composite (FeO_x@CNTs) was synthesized through a combined ball milling-hydrothermal two-step method and tested for aqueous Sb(III) removal efficiency and mechanisms. FeO_x nanoparticles was successfully loaded on the surface of CNTs through functional groups such as hydroxyl (-OH), C-H, and C-O to enhance the removal efficiency of Sb(III) through adsorption and surface complexation. At a dosage of 0.02 g, a FeCl₃·6H₂O-to-CNTs mass ratio of 3:1, and an initial solution pH of 6.3, the amount of Sb(III) removed by the prepared FeO_x@CNTs reached 172 mg/g, which was 42.9 times higher than that of the pristine CNTs (4.01 mg/g). Chemical adsorption and oxidation were the main removal mechanisms. At the equilibrium Sb(III) concentration of 6.08 mg/L, 6.56% of initial Sb(III) was adsorbed onto the surface of FeO_x@CNTs, and 81.3% of initial Sb(III) was oxidized to Sb(V) with lower toxicity. The pseudo-second-order kinetic model could better describe the adsorption of Sb(III) onto the FeO_x@CNTs composite, indicating that adsorption was mainly controlled by chemical sorption. In the adsorption isotherm equation, the Redlich-Peterson model provided a better fit of Sb(III) adsorption onto the FeO_x@CNTs composite than the Langmuir and Freundlich models, which further indicated that the adsorption process was a hybrid removal process dominated by chemical sorption. The presence of CO₃^2- slightly promoted the removal of Sb(III) from aqueous solution. The synthesized composite was magnetic and could be easily separated from the solution by an external magnetic field at the end of the sorption experiment. Based on these findings, the FeO_x@CNTs nanocomposite is expected to provide an environmentally-friendly adsorbent with a strong sorption capacity for remediating Sb(III) in water environments.

Synthesis of nano-silica and biogenic iron (oxyhydr)oxides composites mediated by iron oxidizing bacteria to remove antimonite and antimonate from aqueous solution: Performance and mechanisms

Removal of antimony from wastewater is essential because of its potential harm to the environment and human health. Nano-silica and biogenic iron (oxyhydr)oxides composites (BS-Fe) were prepared by iron oxidizing bacteria (IOB) mediation and the batch adsorption experiments were applied to investigate antimonite (Sb(III)) and antimonate (Sb(V)) removal behaviors. By contrast, the synthetic BS-Fe calcined at 400 ℃ (BS-Fe-400) exhibited a large specific surface area (157.353 m²/g). The maximum adsorption capacities of BS-Fe-400 were 102.10 and 337.31 mg/g for Sb(III) and Sb(V), respectively, and experimental data fit well to the Langmuir isotherm and Temkin models, and followed the pseudo-second order kinetic model. Additionally, increasing pH promoted Sb(III) adsorption, while inhibited the adsorption of Sb(V), indicating that electrostatic attraction made a contribution to Sb(V) adsorption. Moreover, different co-existing ions showed different effects on adsorption. Characterization techniques of FTIR and XPS indicated that the main functional groups involved in the adsorption were -OH, C-O, CO, C-C, etc. and Sb(III) and Sb(V) may bind to iron (oxyhydr)oxides via the formation of inner-sphere complexes. The present work revealed that the synthetic BS-Fe-400 by nano-silica and biogenic iron (oxyhydr)oxides held great application potential in antimony removal from wastewater.

Reduced graphene oxide (rGO) aerogel: Efficient adsorbent for the elimination of antimony (III) and (V) from wastewater

3D porous, thin sheet-like rGO aerogel was fabricated to explore its antimony (Sb) removal potential from wastewater. Langmuir isothermal and pseudo-second-order kinetic model best-suited the adsorption process. The maximum adsorption capacities were 168.59 and 206.72 mg/g for Sb (III and V) at pH 6.0 respectively. The thermodynamic parameters designated the process to be thermodynamically spontaneous, endothermic reaction, a result of dissociative chemisorption. The rGO aerogel bestowed good selectively among competing ions and reusability with 95% efficiency. rGO posed excellent practicability with Sb-spiked tap water and fixed-bed column experiments showing 97.6% of Sb (III) (3.6 μg/L) and 96.8% of Sb (V) (4.7 μg/L) removal from tap water and from fixed column bed experiments breakthrough volumes (BV) for the Sb (III) and Sb (V) ions were noted to be 540 BV and 925 BV respectively, until 5 ppb, which are below the requirement of MCL for Sb in drinking water (6 μg/L). XPS and DFT analyses explained adsorption mechanism and depicted a higher affinity of Sb (V) towards rGO surface than Sb (III).

Antimony, a pollutant of emerging concern: A review on industrial sources and remediation technologies

Technologies for remediation of industrial effluents and natural sources contaminated with antimony - a pollutant of emerging concern - are just emerging. The complex speciation of antimony makes it challenging to devise effective remediation technologies. Antimony is used in several industrial applications and comes into the environment majorly through human induced activities such as antimony mining and other activities involving the use of various products containing antimony. Many researchers are working on the important task of developing methodologies to stop or limit the release of antimony into the environment through these activities. Antimony removal is an important requirement in nuclear industry as well due to the formation of its radioactive isotopes during power plant operations. Thus, better antimony remediation or removal techniques can have wider applications ranging from domestic water treatment and industrial effluent remediation to safe isolation of radioactive waste in the nuclear industry. Proper understanding of the problem is very important in designing the source appropriate remediation technique. Treatment methodologies needed for antimony effluents from antimony mining and smelting industries are different from antimony decontamination in nuclear reactors. The problem of antimony leaching from a polyethylene terephthalate bottle is very much different from the leaching of antimony from mining wastes. Each process necessitates custom-made treatment methodologies by taking into account various factors including the speciation and concentration. The current review is focused on this aspect. The review attempts to bring out a clear understanding on various industry specific sources of antimony pollution and the available antimony removal/remediation technologies.

Removal of low Sb(V) concentrations from mining wastewater using zeolitic imidazolate framework-8

Wastewater generated during mining remains a significant source of antimony pollution, because techniques to quickly and efficiently remove antimony from wastewater do not exist. In this study, zeolitic imidazolate framework-8 (ZIF-8), a specific type of Metal Organic Frameworks (MOFs), was successfully used to remove trace levels (1 mg L^-1) of Sb(V) with a high removal efficiency when the ZIF-8 dose was 0.5 g L^-1. Scanning electron microscopy-X-ray energy dispersive spectrometry (SEM-EDS) indicated that Sb(V) was adsorbed onto the ZIF-8surface. The powder X-ray diffraction (XRD) pattern of ZIF-8 before and after adsorption of Sb(V) indicated that ZIF-8 was successfully synthesized, and remained structurally stable after Sb(V) was adsorbed. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) both suggested complexation of zinc on ZIF-8 with Sb(V), where removal of Sb(V) by ZIF-8 followed the Langmuir adsorption isotherm with pseudo second-order kinetics. Thus, a possible removal mechanism was proposed which involved Sb(V) complexing with the zinc hydroxyl groups on ZIF-8 (Zn-OH-Sb). Practically, ZIF-8, could remove 78.6% of Sb(V) from a mining wastewater containing 20 μg L^-1 Sb(V). Furthermore, ZIF-8 could be remain active after repeated uses and could still remove and 42.3% of Sb(V) from wastewater containing 1 mg L^-1) Sb(V) even when the ZIF-8 was reused five time. This indicated that ZIF-8 had potential for practical removal of Sb(V) from mining wastewaters.

Oxygen Reduction Reaction in the Field of Water Environment for Application of Nanomaterials

Water pollution has caused the ecosystem to be in a state of imbalance for a long time. It has become a major global ecological and environmental problem today. Solving the potential hidden dangers of pollutants and avoiding unauthorized access to resources has become the necessary condition and important task to ensure the sustainable development of human society. To solve such problems, this review summarizes the research progress of nanomaterials in the field of water aimed at the treatment of water pollution and the development and utilization of new energy. The paper also tries to seek scientific solutions to environmental degradation and to create better living environmental conditions from previously published cutting edge research. The main content in this review article includes four parts: advanced oxidation, catalytic adsorption, hydrogen, and oxygen production. Among a host of other things, this paper also summarizes the various ways by which composite nanomaterials have been combined for enhancing catalytic efficiency, reducing energy consumption, recycling, and ability to expand their scope of application. Hence, this paper provides a clear roadmap on the status, success, problems, and the way forward for future studies.