Pinewood outperformed bamboo as feedstock to prepare biochar-supported zero-valent iron for Cr6+ reduction

Insights into the Mechanism of Efficient Cr(VI) Removal from Aqueous Solution by Iron-Rich Wheat Straw Hydrochar: Coupling DFT Calculation with Experiments

Agricultural solid waste has become one of the raw materials for hydrothermal carbon production, promoting resource utilization. This study synthesized two types of ball-milling carbons (Fe-MHBC vs MHBC) with and without FeCl3 modification using wheat straw hydrochars. Cr(VI) adsorption on these two types of ball-milling carbons was investigated. According to Langmuir's maximum adsorption capacity analysis, Fe-MHBC had a capacity of 116.29 mg g-1. The thermodynamic analysis based on isothermal adsorption reveals the spontaneous process of the reaction between the two materials. The adsorption of Cr(VI) on Fe-MHBC exhibited excellent agreement with the pseudo-second-order kinetics model. Furthermore, X-ray photoelectron spectroscopy analysis showed that Fe(II) in the material reduced Cr(VI) when it participated in the reaction. The acidic conditions facilitate the elimination of Cr(VI). The Fe-MHBC has a higher zeta potential, which enhances the electrostatic attraction of Cr(VI) particles. Even with a starting pH of 10, the removal rate can be consistently maintained at over 64%. The adsorption of Cr(VI) was inhibited by various anions and higher ion concentrations. Density functional theory demonstrates that the presence of Fe enhances the adsorption capacity and electron transfer flux of Cr(VI). Fe-MHBC effectively eliminates Cr(VI) by the process of electrostatic adsorption, redox, and complexation reactions. This study demonstrated that hydrochar materials modified by FeCl3 through a ball-milling process show considerable potential as effective adsorbents in the treatment of Cr(VI) pollution, offering a viable and environmentally friendly solution for mitigating this prevalent environmental issue.

Application and development of zero-valent iron (ZVI)-based materials for environmental remediation: A scientometric and visualization analysis

Zero-valent iron (ZVI)-based materials are among the most widely used engineered particles in the field of environmental remediation. To provide a comprehensive overview of the status and trend of the research on them, this study conducted a quantitative and visual analysis of 6296 relevant publications obtained from Web of Science between 1994 and 2022 using CiteSpace software. By using the bibliometric method, this work systematically analyzed the knowledge structure, research hotspots and trends of ZVI-based materials in this field. The results show that the research on ZVI-based materials in this field developed rapidly over the past 28 years. China is the greatest contributor with the most published articles and collaborations. Still, the USA has the most academic influence with the highest average citations per article. Chinese Academy of Sciences and Tongji University are the primary establishments that produced the greatest number of publications and had the highest h-index. Keyword cluster analysis indicates that the primary research topics are related to reductive dechlorination, sulfate radical, arsenic removal, graphene oxide, porous media, peroxymonosulfate, groundwater remediation, and permeable reactive barrier. Meanwhile, keyword burst analysis reveals that the primary research hotspots and frontiers of ZVI focus on its modification, the refractory and emerging contaminants treatment, persulfate activation, and electron transfer. However, no keywords or topics related to the environmental impact and toxicity of ZVI-based materials are available in the keyword clustering and burst analysis results, indicating this direction deserves more attention in future research. Through a comprehensive and in-depth bibliometric analysis, this paper provides new insight into the research hotspots and development trends of the research on ZVI-based materials in environmental remediation.

Superior reduction and immobilization of Cr(VI) in soil utilizing sulfide nanoscale zero-valent iron supported by phosphoric acid-modified biochar: Efficiency and mechanism investigation

A novel strategy was proposed to remediate Cr(VI)-contaminated soil via phosphoric acid-modified biochar supported sulfide nanoscale zero-valent iron (SnZVI@PBC). Results of characterizations revealed that FeSX shell existed in outer layer of nZVI to prevent its oxidation after sulfidation modification, and SnZVI was effectively dispersed owing to the support of PBC, accelerating the electron transport for Cr(VI) reduction. The SnZVI@PBC presented pH-dependence and fast capture for Cr(VI) with outstanding binding amount of 335.55 mg/g. More importantly, the Cr(VI) content declined from 1300.75 to 223.30 mg/kg with conversion into stable Cr(III) in soil after 42 d of remediation with 2.0 % SnZVI@PBC under 60 % moisture content. Furthermore, leaching experiments showed that SnZVI@PBC could effectively immobilize Cr(VI), decreasing its migration and harmful risks to plants and human. Particularly, the fractions of exchangeable and carbonate-bound Cr decreased by 96.77 % and 83.60 %, which transformed to relatively stable fractions. Interestingly, the presence of humic acid, and the freezing-thawing/wetting-drying process promoted the immobilization performance of SnZVI@PBC for Cr(VI). SnZVI@PBC could alleviate the migration and poisonousness of Cr(VI) in soil primarily via reduction, co-precipitation, pore filling, and electrostatic attraction. Overall, SnZVI@PBC could be considered as a feasible amendment with superior reducing capacity and immobilization performance for Cr(VI)-contaminated soil.

Immobilization of zinc and cadmium by biochar-based sulfidated nanoscale zero-valent iron in a co-contaminated soil: Performance, mechanism, and microbial response

Mining and smelting of mineral resources causes excessive accumulation of potentially toxic metals (PTMs) in surrounding soils. Here, biochar-based sulfidated nanoscale zero-valent iron (SNZVI/BC) was designed via a one-step liquid phase reduction method to immobilize cadmium (Cd) and zinc (Zn) in a copolluted arable soil. A 60 d soil incubation experiment revealed that Cd and Zn immobilization efficiency by 6 % SNZVI/BC (25.2-26.2 %) was higher than those by individual SNZVI (13.9-18.0 %) or biochar (14.0-19.3 %) based on the changes in diethylene triamine pentaacetic acid (DTPA)-extractable PTM concentrations in soils, exhibiting a synergistic effect. Cd2+ or Zn2+ replaced isomorphously Fe2+ in amorphous ferrous sulfide, as revealed by XRD, XPS, and high-resolution TEM-EDS, forming metal sulfide precipitates and thus immobilizing PTMs. PTM immobilization was further enhanced by adsorption by biochar and oxidation products (Fe2O3 and Fe3O4) of SNZVI via precipitation and surface complexation. SNZVI/BC also increased the concentration of dissolved organic carbon and soil pH, thus stimulating the abundances of beneficial bacteria, i.e., Bacilli, Clostridia, and Desulfuromonadia. These functional bacteria further facilitated microbial Fe(III) reduction, production of ammonium and available potassium, and immobilization of PTMs in soils. The predicted function of the soil microbial community was improved after supplementation with SNZVI/BC. Overall, SNZVI/BC could be a promising functional material that not only immobilized PTMs but also enhanced available nutrients in cocontaminated soils.

Bamboo-derived adsorbents for environmental remediation: A review of recent progress

The bamboo family of plants is one of the fastest-growing species in the world. As such, there is an abundance of bamboo residues available for exploitation, especially in southeast Asian, central African and south American regions. The preparation of efficient adsorbents from bamboo residues is an emerging exploitation pathway. Biochars, activated carbons or raw bamboo fibers embedded with nanoparticles, each class of materials has been shown to be highly efficient in adsorption processes. This review aims to summarize recent findings in the application of bamboo-based adsorbents in the removal of organic, inorganic, or gaseous pollutants. Therefore, this review first discusses the preparation methods and surface modification methodologies and their effects on the adsorbent elemental content and other basic properties. The following sections assess the recent progress in the adsorption of heavy metals, organics, and gaseous substances by bamboo-based adsorbents, focusing on the optimum adsorption capacities, adsorption mechanisms and the optimum-fitting kinetic models and isotherms. Finally, research gaps were identified and directions for future research are proposed.

Investigating the dynamics of ammonia volatilisation and the role of additives in thermal digestion of food waste

Averting nutrient volatilisation in thermal treatment of organic waste is a challenging task. The dynamics of ammonia volatilisation and the role of additives in preventing the losses of nutrients in thermal digestion of food waste (FW) were explored. The experimental trials were performed in a convective dehydrator at different combinations of temperatures and airflow velocities. The study dictated that ammonia volatilisation rate increased with increase in temperature and airflow velocity. The losses reached to its peak during the initial drying period and then gradually declined in the falling rate period. An artificial intelligence-based random forest model was explored to precisely predict the ammonia losses during the drying process. The SEM-EDX images confirmed enhanced N (2.25%) in the alum treated end product compared to blank (N - 1.8%) and thus reveals alum induced mineralization of nutrients. Higher intensities of the N containing compounds peaks observed in FTIR spectra also supported the mineralization of nitrogen. XRD analysis indicated formation of stable ammonium compounds in the sample digested with alum. Cost benefit analysis of the alum aided digestion revealed that it enhances the nutrient retention and overall cost of N in the end product by ₹626/tonne. The study revealed high potential of alum in reducing the ammonia volatilisation and enhancing the agronomical value of nutrients in the thermal digestion process.

Removal of Cr(VI) from aqueous solutions by nZVI-loaded sludge-derived biochar: performance and mechanism

With the rapid development of highland railways in China, a large amount of heavy metal wastewater was inevitably generated during the manufacturing process of alloy materials required for railway construction. In this paper, pyrolysis of municipal sludge was followed by ball milling to obtain ball milling sludge-derived biochar (SDBC), and then nZVI-loaded SDBC materials (nZVI@SDBC) were prepared by liquid-phase reduction. The effects of different factors on the Cr(VI) removal were investigated. The maximum Cr(VI) adsorption capacity of nZVI@SDBC(2:1) was 178.05 mg/g. The Cr(VI) removal process could be fitted by the Langmuir isotherm and pseudo-second-order kinetic model. The Cr(VI) removal mechanism mainly included complexation, reduction, electrostatic interaction, and coprecipitation. The Cr(VI) removal by nZVI@SDBC(2:1) was maintained at over 90% after five replicate experiments. nZVI@SDBC(2:1) was capable of removing most of the Cr(VI) from real electroplating wastewater. The cost of using nZVI@SDBC(2:1) to remove 1 m³ of actual wastewater is approximately 325.7162 USD/m³. This work provided a new idea for the solution of Cr(VI)-containing wastewater from the production of railway materials.

Pyrolysis temperature and feedstock affected Cr(VI) removal capacity of sulfidated zerovalent iron: Importance of surface area and electrical conductivity

Herein, feedstock (pinewood, rice straw, and dairy manure) and pyrolysis temperature (300, 500, and 700 °C) were selected as the influencing factors of properties of biochar (BC) to identify the contribution of biochar's matrix on Cr(VI) removal by BC-supported sulfidated zero-valent iron (S-ZVI/BC). Results showed that higher temperature was more conducible to improve the electrochemical properties and specific surface areas of composites. Raman spectra of S-ZVI supported by pinewood-derived BC (S-ZVI/PBC) showed the I_D/I_G ratio increased from 0.639 to 0.975 for the composites prepared at 300-700 °C, indicating the increased structural defects and resulting in the greatest Cr(VI) removal (35.81 mg g^-1) and reduction (30.21 mg g^-1) amounts of S-ZVI/PBC700. Besides, S-ZVI/PBC exhibited greater electrochemical reactivity and surface area than S-ZVI harbored by BC from dairy manure and rice straw. Additionally, Pearson correlation analysis revealed that Cr(VI) removal was significantly positively correlated to surface area (R² = 0.90) and negatively correlated to Tafel corrosive potential (R² = 0.88). Both desorption experiment and XPS spectra of spent sorbents showed that reduction predominated the detoxifying mechanism of Cr(VI) followed by adsorption (due to corrosively-generated iron oxides and BC) and precipitation (Cr₂S₃). This suggested that biochar with greater specific surface area and electrical conductivity is more favorable to immobilize S-ZVI with respect to Cr(VI) removal.

Carbon matrix of biochar from biomass modeling components facilitates electron transfer from zero-valent iron to Cr(VI)

Biochar-harbored zero-valent iron (ZVI/BC) has been extensively used to detoxify hexavalent chromium (Cr(VI)). However, the role played by biochar in promoting electron transfer of ZVI and Cr(VI) reduction was not fully uncovered. Herein, three biomass modeling components (cellulose, hemicellulose, and lignin) and their blends were utilized to synthesize ZVI/BC via co-pyrolysis with hematite. X-ray diffraction analysis showed that hematite was successfully reduced to ZVI in nitrogen ambience. Batch sorption experiment showed that mass ratio (hematite to lignocellulosic component) of 1:20 is most optimal for reduction of Cr(VI) by ZVI/BCs. ZVI supported by BC derived from cellulose, hemicellulose, and their binary mixture demonstrated better Cr(VI) removal capacity (23.8-38.3 mg g-1) owing to higher ordered and graphitic carbon structure as revealed by Raman spectrum. In addition, lower Tafel corrosion potentials and smaller electrochemical impedance arc radiuses were observed based on electrochemical analysis, suggesting their higher electrical conductivity and faster electron transfer, whereas the BCs derived from lignin and lignin-containing hybrids were not conducive to electron transfer of ZVI due to lower degree of graphitization, thus compromising Cr(VI) removal by ZVI/BC (7.7-17.7 mg g-1). As per X-ray photoelectron spectroscopy analysis, reduction, complexation, and co-precipitation were the main mechanisms for Cr(VI) removal. The present study provided a scientific evidence for screening plant-derived biomass feedstock with high contents of cellulose and hemicellulose and low lignin content to fabricate ZVI/BC to achieve high Cr(VI) removal.

Groundwater remediation using Magnesium-Aluminum alloys and in situ layered doubled hydroxides

In situ remediation of groundwater by zerovalent iron (ZVI)-based technology faces the problems of rapid passivation, fast agglomeration, limited range of pollutants and secondary contamination. Here a new concept of Magnesium-Aluminum (Mg-Al) alloys and in situ layered double hydroxides on is proposed for the degradation and removal of a wide variety of inorganic and organic pollutants from groundwater. The Mg-Al alloy provides the electrons for the chemical reduction and/or the degradation of pollutants while released Mg²⁺, Al³⁺ and OH^- ions react to generate in situ LDH precipitates, incorporating other divalent and trivalent metals and oxyanions pollutants and further adsorbing the micropollutants. The Mg-Al alloy outperforms ZVI for treating acidic, synthetic groundwater samples contaminated by complex chemical mixtures of heavy metals (Cd²⁺, Cr⁶⁺, Cu²⁺, Ni²⁺ and Zn²⁺), nitrate, AsO₃^3-, methyl blue, trichloroacetic acid and glyphosate. Specifically, the Mg-Al alloy achieves removal efficiency ≥99.7% for these multiple pollutants at concentrations ranging between 10 and 50 mg L^-1 without producing any secondary contaminants. In contrast, ZVI removal efficiency did not exceed 90% and secondary contamination up to 220 mg L^-1 Fe was observed. Overall, this study provides a new alternative approach to develop efficient, cost-effective and green remediation for water and groundwater.

Rapid and efficient reduction of chromate by novel Pd/Fe@biomass derived from Enterococcus faecalis

Efficient reduction of chromate is highly desirable for its detoxification and remediation of the contaminated environment. This study described a fusion of the concepts of precious metal biorecovery and fabrication of Pd/Fe@biomass derived from simulated wastewater. The effectiveness of Pd/Fe@biomass during reduction process of Cr(VI) was evaluated by comparing with pure nZVI, E. faecalis and Pd@biomass. Results showed that Pd(II) could be recovered by E. faecalis with Fe(II) as the electron donor, and precipitation could yield nZVI anchored onto Pd-loaded E. faecalis. The nano particles (NPs) on Pd/Fe@biomass were well-dispersed, which provided 2.70 folds specific surface area comparing with nZVI. Efficient Cr(VI) reduction could be achieved at a higher catalyst dosage, the most appropriated Pd/Fe molar ratio of 2% and a wide pH range. Typically, 0.5 mM Cr(VI) could be completely reduced in 5 min driven by Pd/Fe@biomass under the conditions of dosage of 1.0 g/L and pH 3. Moreover, the mechanisms of Cr(VI) reduction by Pd/Fe@biomass were proposed, which intimately related to nZVI electron donating capacities, Pd catalysis for hydrogenation and galvanic cell effects between Fe and Pd. Therefore, Pd/Fe@biomass could be an alternative for rapid and complete reduction of Cr(VI).

The significant role of electron donating capacity and carbon structure of biochar to electron transfer of zerovalent iron

Herein, the major biochar properties were correlated with electron transfer of zerovalent iron (ZVI) and contribution of biomass constituents to biochar property was ascertained to optimize electron transfer of ZVI. To this end, five respective stalk-type and wood-type lignocellulosic biomasses were pyrolzed at 600 °C to prepare biochars to harbor ZVI (ZVI/BC). Thermogravimetric analysis demonstrated woody biomasses decomposed more intensively at higher temperature relative to stalky biomass. ZVI/BC were characterized with Raman, X-ray diffraction, and electrochemical analyses including electron donating capacity (EDC) and electron accepting capacity (EAC). Pearson correlation and partial least-squares (PLS) analyses confirmed that Cr(VI) reduction capacity was negatively related to Tafel corrosion potential and intensity ratio of I_D/I_G, but significantly positively-related to EDC of BC, in which EDC was a predominant attribute to contribute to reductive capacity toward Cr(VI) reduction. That is, greater EDC and higher graphitic carbon structure of biochar due to cellulose and hemicellulose components favor electron transfer of ZVI toward Cr(VI) reduction.

Quickly and efficiently remove multiple pesticides in tea infusions by low-cost carbonized bacterial cellulose

Soaking tea leaves make tea consumers exposure to pesticide residues more easily. However, there are few studies on the removal of pesticides in tea infusions. Therefore, a low-cost carbonized bacterial cellulose material was prepared by direct calcination method, and used to remove multiple pesticides in tea infusions quickly and efficiently. CBC-350 has the best removal efficiency for 9 pesticides and then screened the best adsorption conditions. The adsorption isotherm experiment was carried out and indicated that the adsorption process was in consist with the Freundlich model. The thermodynamic parameters are also calculated. Moreover, the adsorption mechanism was discussed, which suggests that π-π interaction and hydrophobic action are the driving force during the adsorption process. Exhilaratingly, the CBC-350 also has excellent adsorption capacity compared to other adsorbents and can be reused at least five times.

Mesoporous activated carbon as a green adsorbent for the removal of heavy metals and Congo red: Characterization, adsorption kinetics, and isotherm studies

In this study, an effective and green adsorbent was prepared by the self- activation of kenaf fiber and then the kenaf-based activated carbon (KAC) was applied for the removal of lead Pb(II), copper Cu(II), and Congo red (CR) dye from an aqueous solution by the process of adsorption. The surface morphology of mesoporous adsorbent was characterized. The KAC showed good capacity of adsorption of as Pb(II), Cu(II), and anionic dye CR in very short period of agitation. The adsorbent efficiency of metal ions and dye was estimated by varying the adsorbent dose, pH, contact time, initial metals and dye concentration, and temperature. Optimum adsorption of metal ions and CR dye was observed at pH 6, and at pH 4 at 120 min, respectively. The adsorption isotherm was described by the Langmuir and Freundlich isotherm equations. The green adsorbent followed the pseudo-second-order kinetic model with correlation coefficients R² value >0.99. The increase in adsorption temperature enhanced the adsorption efficiency for both heavy metals and dye. The KAC showed no significant loss of the adsorption capacity after 3 cycles of reuse.

Degradation of organic contaminants in marine sediments by peroxymonosulfate over LaFeO3 nanoparticles supported on water caltrop shell-derived biochar and the associated microbial community responses

Sediment is an important final repository of persistent organic pollutants such as polycyclic aromatic hydrocarbons (PAHs). Herein, a novel catalyst of LaFeO₃ nanoparticles supported on biochar was synthesized from water caltrop shell by chemical precipitation. The composite (LFBC) was used as peroxymonosulfate (PMS) activator to oxidize PAHs in real marine sediments. Systematic surface characterization confirmed the immobilization of well crystalline nano LaFeO₃ particles onto the biochar surface. Under optimal conditions, i.e., [PMS] = 3 × 10^-4 M, [LFBC] = 0.75 g/L, pH 6.0, and seawater, the total PAH degradation efficiency was 90%, while that of 2-, 3-, 4-, 5-, and 6-ring PAHs was 52%, 61%, 66%, 56%, and 29%, respectively, in 24 h. The Langmuir-Hinshelwood equation better predicted the PAHs degradation kinetics over LFBC by PMS. Interactions between surface oxygen species at LaFeO₃ defective sites and the graphitized biochar network facilitated the PAHs degradation. Furthermore, changes in the bacterial community during the LFBC/PMS treatment were highlighted to assess the sustainable development of the sediment ecosystem. The LFBC/PMS process enhanced the biological richness and diversity of sediment eco-systems. The major phylum was Proteobacteria initially, while Hyphomonas was the genera after LFBC/PMS treatment of the sediment.

Competitive adsorption of Dibutyl phthalate (DBP) and Di(2-ethylhexyl) phthalate (DEHP) onto fresh and oxidized corncob biochar

Phthalates (PAEs) often exist simultaneously in contaminated soil and wastewater systems, and their adsorption to biochar might impact their behavior in the environment. So far, the competitive adsorption of PAEs to biochar has not been reported. In this study, the competitive adsorption of Dibutyl phthalate (DBP) and Di(2-ethylhexyl) phthalate (DEHP) on corncob biochar (fresh and oxidized) was investigated, and experiments of kinetics, isotherms, and thermodynamics were conducted. Langmuir and Freundlich models, pseudo-first-order and second-order kinetic models were used to simulate the experimental data. In the mono PAEs component systems, the biochar showed significantly greater adsorption capacity for DEHP (11.8-16.16 mg g^-1) than for DBP (9.86-13.2 mg g^-1). The oxidized biochar has higher adsorption capacities than the fresh one. Moreover, a fast adsorption rate for DBP was observed, which can be attributed to the smaller size and shorter carbon chains in the DBP molecule, resulting in faster diffusion into the biochar pores. In the binary PAEs component systems, competition between DEHP and DBP in their adsorption to the biochars was observed, and DEHP (11.7-15.0 mg g^-1) was preferred over DBP (3.4-7.9 mg g^-1). The stronger adsorption of DEHP can be explained by stronger hydrophobic interaction with biochar. Compared to DBP, DEHP has a high octanol-water partition coefficient (logK_ow) and low water solubility. The positive entropy (ΔS⁰) and enthalpy(ΔH⁰) values for the adsorption of both DEHP and DBP further indicated that hydrophobic interaction played an important role, even though H-bonds and π-π interactions could also be involved.

Photocatalytic reduction of Cr(VI) over cinder-based nanoneedle in presence of tartaric acid: Synergistic performance and mechanism

Cr(VI) is a common heavy metal ion, which will seriously harm human body and environment. Therefore, the removal of Cr(VI) has become an attractive topic. In this work, cinder was used as a raw material to synthesize a nanoneedle material: γ-(AlOOH@FeOOH) (γ-Al@Fe). The physicochemical properties of γ-Al@Fe were thoroughly characterized, and its effectiveness as a catalyst for photocatalytic reduction of Cr(VI) was evaluated. The results showed that Cr(VI) could be efficiently reduced by γ-Al@Fe in the presence of tartaric acid (TA) under visible light. The variable factors on the reaction were investigated in detail, and the results showed that under optimal conditions (γ-Al@Fe 0.4 g/L, TA 0.6 g/L, pH 2), Cr(VI) was completely reduced within 7 min. Besides, scavenger experiments and EPR proved that O₂^{• -} and CO₂^{• -} played a significant role in the photocatalytic reduction of Cr(VI). TA acts as a sacrificial agent to trap the holes and generate strong reducing free radicals: CO₂^{• -}. Dissolving O₂ could react with electrons to generate O₂^{• -}. This work discussed the performance and mechanism of photocatalytic reduction of Cr(VI) in detail, which provided a new idea for the resource utilization of solid waste and the treatment of heavy metal sewage.

Increased structural defects of graphene oxide compromised reductive capacity of ZVI towards hexavalent chromium

Graphene oxide (GO) was treated with irradiation beams to understand the defective degree of carbon structure of GO in relation to electron transfer property of impregnated zerovalent iron (ZVI). The GO-supported ZVI (ZVI/GO) was synthesized and then characterized by an X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. The results showed that the oxygen-bearing functional groups, oxygen content and structural disorder were increased as a function of irradiation beam intensity. ZVI was dominant in the composites, but proportion of iron oxide increased with greater oxygen content. Batch sorption revealed that Cr(VI) removal decreased from 20.11 g kg^-1 to 2.30 g kg^-1 as solution pH rose from 3 to 9. Cr(VI) removal capacity was 26.39 g kg^-1, 23.12 g kg^-1 and 12.35 g kg^-1 for ZVI/GO₀, ZVI/GO_12.3 and ZVI/GO_36.9, respectively. The reduction capacity of sorbents followed similar trends as Cr(VI) sorption as per desorption experiment, which accounted for a major Cr(VI) detoxification mechanism by ZVI/GO composites. The electrochemical tests demonstrated that unfavorable electron transfer rate of ZVI/GO composites was aggravated by greater structural disorder of GO. Thus, higher dose of irradiations could create more disorder in graphitic carbon and promote oxidation of ZVI, which hindered Cr(VI) reduction.

ZVI impregnation altered arsenic sorption by ordered mesoporous carbon in presence of Cr(Ⅵ): A mechanistic investigation

It is challenging to efficiently remove arsenate (As(Ⅴ)) and chromate (Cr(Ⅵ)) simultaneously. Herein, ordered mesoporous carbon (OMC) was fabricated with averaged pore diameter of 6.5 nm and surface area of 997 m² g^-1. Zerovalent iron (ZVI) impregnation reduced surface area of ZVI/OMC (432 m² g^-1) and increased I_D/I_G ratio by 13%. Maximal Cr(Ⅵ) and As(Ⅴ) sorption capacities at pH 3 were 0.66 and 0.019 mmol g^-1 by OMC, and 0.71 and 0.39 mmol g^-1 by ZVI/OMC, respectively. Reduction accounted for over 55% for Cr(Ⅵ) and As(Ⅴ) removal followed by complexation and precipitation. Better ZVI/OMC performance was ascribed to higher electron transfer rate and lower electrical resistance than OMC as per electrochemical analysis. Upon Cr(Ⅵ) introduction, As(Ⅴ) removal increased to 0.28 mmol g^-1 by OMC, but decreased to 0.16 mmol g^-1 by ZVI/OMC. OMC could preferably reduce CrO₄^2- to Cr³⁺ by hydroxyl group, which enhanced its zeta potential facilitating As(Ⅴ) sorption. Regarding ZVI/OMC, Fe⁰ and Fe oxide in ZVI/OMC exhibited better affinity to As(Ⅴ), but the competition for the similar active sites resulted in compromised As(Ⅴ) and Cr(Ⅵ) removal. Thus, the novel OMC is advantageous for removal of binary As(Ⅴ) and Cr(Ⅵ), but ZVI/OMC is robust to detoxify single heavy metal.

Application of biochars in the remediation of chromium contamination: Fabrication, mechanisms, and interfering species

Chromium (Cr) is one of the most toxic pollutants that has accumulated in terrestrial and aqueous systems, posing serious risks towards living beings on a worldwide scale. The immobilization, removal, and detoxification of active Cr from natural environment can be accomplished using multiple advanced materials. Biochar, a carbonaceous pyrolytic product made from biomass waste, is considered as a promising material for the elimination of Cr contamination. The preparation and properties of biochar as well as its remediation process for Cr ions have been well investigated. However, the distinct correlation of the manufacturing, characteristics, and mechanisms involved in the remediation of Cr contamination by various designed biochars is not summarized. Herein, this review provides information about the production, modification, and characteristics of biochars along with their corresponding effects on Cr stabilization. Biochar could be modified via physical, hybrid, chemical, and biological methods. The remediating mechanisms of Cr contamination using biochars involve adsorption, reduction, electron shuttle, and photocatalysis. Moreover, the coexisting ions and organic pollutants change the pattern of the remediating process of biochar in actual Cr contaminated water and soil. Finally, the present limitations and future perspectives are proposed.

The contribution of lignocellulosic constituents to Cr(VI) reduction capacity of biochar-supported zerovalent iron

Biochars (BCs) derived from individual and blending lignocellulosic constituents were prepared to harbor zerovalent iron (ZVI/BC) in an effort to discriminate significance of each constituent or combination in ZVI/BC for Cr(VI) removal. BCs and ZVI/BC were characterized by TGA/GSC, XRD, Raman and BET analyses. Cellulose (BC_C) and hemicellulose (BC_H)-derived BCs has greater C content, H/C ratio, surface area and mass loss than BCs derived from lignin or lignin-containing biopolymer blends (BC_LX). As per sorption and XPS analysis, ZVI/BC demonstrated greater Cr(VI) removal capacity than respective BCs, in which reduction accounted for over 77% Cr(VI) detoxification. Cr(VI) reduction by ZVI harbored by BC_C and BC_H was 19.72-16.54 g kg^-1, compared to 5.97-4.26 g kg^-1 for BC_LX. ZVI/BC prepared by three-biopolymer blends with (12.63 g kg^-1) or without (12.32 g kg^-1) mineral approximated pinewood-BC (BC_P) (13.02 g kg^-1) for Cr(VI) reduction, suggesting minerals are not important constituent. Tafel analysis showed BC_C and BC_H, with lower I_D/I_G ratio owing to greater graphitization, were more conducible to transfer electron of ZVI in Cr(VI) reduction than BC_LX. Thus, cellulose, hemicellulose and lignin can offer a good prediction of property of natural biomass, in which BC_C and BC_H favor electron transfer of ZVI but BC_L is not electroactive.