Facile synthesis of CuO/CdS heterostructure photocatalyst for the effective degradation of dye under visible light

Fabrication of nano-hammer shaped CuO@HApNWs for catalytic degradation of tetracycline

With widespread and excessive use of antibiotics in medicine, poultry farming, and aquaculture, antibiotic residues have become a significant threat to both eco-environment and human health. In this paper, using hydroxyapatite nanowires (HApNWs) as an ecologically compatible carrier, a novel nano-hammer shaped conjunction with HApNW conjugating CuO microspheres (CuO@HApNWs) was successfully synthesized by in-situ agglomeration method. The catalytic degradation performance of the nano-hammer shaped CuO@HApNWs with Fenton-like activation was investigated by using tetracycline (TC) as a representative antibiotic pollutant. Remarkably, it exhibited excellent catalytic activity, which the removal rate of TC got to 92.0% within 40 min, and the pseudo-second-order reaction kinetic constant was 18.33 × 10-3 L mg-1·min-1, which was 26 times and 5 times than that of HApNWs and CuO, respectively. Furthermore, after recycling 6 times, the degradation efficiency of TC still remained above 85 %. Based on radical scavenger tests and electron paramagnetic resonance (EPR) spectroscopy, it demonstrated that the excellent activity of CuO@HApNWs was mainly attributed to the fact that Fenton-like activation promotes the circulation of Cu2+ and Cu+, the generated main active oxygen species (•OH and O2-•) achieve efficient degradation of TC. In summary, the nano-hammer shaped CuO@HApNWs could be in-situ synthesed, and used as an eco-friendly Fenton-like catalyst for effectively catalytic degradation of organic pollutants, which has great potential for wastewater treatment.

Vacancy induced enhanced photocatalytic activity of nitrogen doped CuO NPs synthesized by Co-precipitation method

The chemical co-precipitation method, an effective approach in the synthesis of nanomaterials, was used to synthesize CuO nanoparticles (NPs). Structural and morphological modification of undoped and nitrogen (N) doped CuO nanoparticles were studied thoroughly using X-ray diffraction (XRD), FT-IR and field emission scanning electron microscope (FE SEM). Doping effect on defects was investigated using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and photoluminescence (PL) spectroscopy. Thus, the effect of doping on crystallinity, crystallite size, strain induced in lattice, defects and electron-hole recombination rate were investigated. Optical band gap was calculated using Kubelka-Munk function from the diffuse reflectance spectra (DRS) obtained using ultraviolet visible (UV-Vis) spectroscopy. Finally, photocatalytic performance was studied from rhodamine B (Rh B) degradation and reaction kinetics were analyzed. Maximum degradation efficiency was obtained for 1.0 mol% N doped CuO NPs which also exhibited minimum band gap and lowest electron-hole recombination rate. For the optimum doping concentration, nitrogen was found to create oxygen vacancies while substituting oxygen in the lattice, and thus reduce electron-hole recombination rate and increase photocatalytic degradation rate effectively.

Recent advances in visible light-activated photocatalysts for degradation of dyes: A comprehensive review

The rapid development in industrialization and urbanization coupled with an ever-increasing world population has caused a tremendous increase in contamination of water resources globally. Synthetic dyes have emerged as a major contributor to environmental pollution due to their release in large quantities into the environment, especially owing to their high demand in textile, cosmetics, clothing, food, paper, rubber, printing, and plastic industries. Photocatalytic treatment technology has gained immense research attention for dye contaminated wastewater treatment due to its environment-friendliness, ability to completely degrade dye molecules using light irradiation, high efficiency, and no generation of secondary waste. Photocatalytic technology is evolving rapidly, and the foremost goal is to synthesize highly efficient photocatalysts with solar energy harvesting abilities. The current review provides a comprehensive overview of the most recent advances in highly efficient visible light-activated photocatalysts for dye degradation, including methods of synthesis, strategies for improving photocatalytic activity, regeneration and their performance in real industrial effluent. The influence of various operational parameters on photocatalytic activity are critically evaluated in this article. Finally, this review briefly discusses the current challenges and prospects of visible-light driven photocatalysts. This review serves as a convenient and comprehensive resource for comparing and studying the fundamentals and recent advancements in visible light photocatalysts and will facilitate further research in this direction.

Photocatalytic activity of the biogenic mediated green synthesized CuO nanoparticles confined into MgAl LDH matrix

The global concern over water pollution caused by organic pollutants such as methylene blue (MB) and other dyes has reached a critical level. Herein, the Allium cepa L. peel extract was utilized to fabricate copper oxide (CuO) nanoparticles. The CuO was combined with MgAl-layered double hydroxides (MgAl-LDHs) via a co-precipitation method with varying weight ratios of the CuO/LDHs. The composite catalysts were characterized and tested for the degradation of MB dye. The CuO/MgAl-LDH (1:2) showed the highest photocatalytic performance and achieved 99.20% MB degradation. However, only 90.03, 85.30, 71.87, and 35.53% MB dye was degraded with CuO/MgAl-LDHs (1:1), CuO/MgAl-LDHs (2:1), CuO, and MgAl-LDHs catalysts, respectively. Furthermore, a pseudo-first-order rate constant of the CuO/MgAl-LDHs (1:2) was 0.03141 min-1 while the rate constants for CuO and MgAl-LDHs were 0.0156 and 0.0052 min-1, respectively. The results demonstrated that the composite catalysts exhibited an improved catalytic performance than the pristine CuO and MgAl-LDHs. The higher photocatalytic performances of composite catalysts may be due to the uniform distribution of CuO nanoparticles into the LDH matrix, the higher surface area, and the lower electron and hole recombination rates. Therefore, the CuO/MgAl-LDHs composite catalyst can be one of the candidates used in environmental remediation.

The prospect of CuxO-based catalysts in photocatalysis: From pollutant degradation, CO2 reduction, and H2 production to N2 fixation

The topic of photocatalysis and CuxO-based materials has been intertwined for quite a long time. Its relatively high abundance in the earth's crust makes it an important target for researchers around the globe. One of the properties exploited by researchers is its ability to exist in different oxidation states (Cu0, Cu+, Cu2+, and Cu3+) and its implications on photocatalytic efficiency improvement. Recently, they have been extensively used as photocatalytic materials for dye and pollutant degradation. However, it has almost reached saturation levels, therefore, currently, they are being mostly utilized for CO2 reduction and H2 evolution. Hence, this review will discuss the evolution (in application) of CuxO-based photocatalysts, relating to their past, present, and future. Moreover, photocatalytic efficiency improvement strategies such as doping, heterojunction formation, and carbonaceous construction with other materials will also be touched upon. Finally, the prospect of Cu2O-based photocatalysts will be discussed in the field of photocatalytic N2 fixation to ammonia. The significance of N2 chemisorption on photocatalysts to maximize ammonia production will also be given importance.

Exploring the viability of a floating photocatalyst in a continuous stirred tank reactor system for continuous water treatment

The use of photocatalysts in continuous stirred tank reactor (CSTR) systems allows for efficient and continuous water treatment, thus meeting the demand for scalable technology and comparative data in large-scale implementations. Hence, this study aims to explore the feasibility of a floating photocatalyst within a CSTR system for continuous water treatment. An expanded polystyrene (EPS)-TiO2 composite was synthesized following established methodologies, and their efficacy in removing the water pollutant methylene blue (MB) was compared for both batch and CSTR systems. A nonlinear first-order model was identified as the most suitable approach to accurately simulate MB degradation under experimental conditions, and the calculated pseudo-first-order degradation rate constant (k') for the CSTR system (0.0126-0.0172/min) was found to be superior to that observed for the batch system (0.0113/min). In addition, an increase in the flow rate reduced the retention time, leading to lower MB removal efficiency for the CSTR system. In addition, the EPS-TiO2/UV system with a CSTR configuration was found to efficiently use light and energy based on the calculated quantum yield (Φ = 2.86 × 10-4) and electrical energy per order (EEO = 857.46 kWh/m3/order). The findings of this study contribute to the development of sustainable and efficient water treatment strategies, offering valuable insight into the implementation of practical water treatment processes.

Design and construction of a robust ternary Bi5O7I/Cd0.5Zn0.5S/CuO photocatalytic system for boosted photodegradation of antibiotics via dual-S-scheme mechanisms: Environmental factors and degradation intermediates

The detection of efficacious and environment-friendly nanomaterials with prominent photocatalytic performance is crucial for the detoxification of antibiotics in wastewater. Herein, a dual-S-scheme Bi5O7I/Cd0.5Zn0.5S/CuO semiconductor was designed and fabricated via a simple approach to degrade tetracycline (TC) and other types of antibiotics under LED illumination. However, Cd0.5Zn0.5S and CuO nanoparticles were decorated on the surface of the Bi5O7I microsphere to create a dual-S-scheme system that stimulates visible-light utilization and facilitates the dissolution of excited photo-curriers. Therefore, the Bi5O7I/Cd0.5Zn0.5S/CuO system offers strong redox ability, which reflects reinforced photocatalytic activity and robust stability. The ternary heterojunction discloses enhanced TC detoxification efficiency of 92% in 60 min with TC destruction rate constant of 0.04034 min-1, outperforming pure Bi5O7I, Cd0.5Zn0.5S, and CuO by 4.27, 3.20, and 4.80 folds, respectively. Besides, Bi5O7I/Cd0.5Zn0.5S/CuO manifests outstanding photo-activity against a series of antibiotics like norfloxacin, enrofloxacin, ciprofloxacin, and levofloxacin under the same operational conditions. The active species detection, TC destruction pathways, catalyst stability, and photoreaction mechanisms of Bi5O7I/Cd0.5Zn0.5S/CuO were accurately explained in detail. Summarily, this work introduces a new class of dual-S-scheme system with strengthened catalytic properties to effectively eliminate the antibiotics in wastewater under visible-light illumination.

Recent innovations in the technology and applications of low-dimensional CuO nanostructures for sensing, energy and catalysis

Low-dimensional copper oxide nanostructures are very promising building blocks for various functional materials targeting high-demanded applications, including energy harvesting and transformation systems, sensing and catalysis. Featuring a very high surface-to-volume ratio and high chemical reactivity, these materials have attracted wide interest from researchers. Currently, extensive research on the fabrication and applications of copper oxide nanostructures ensures the fast progression of this technology. In this article we briefly outline some of the most recent, mostly within the past two years, innovations in well-established fabrication technologies, including oxygen plasma-based methods, self-assembly and electric-field assisted growth, electrospinning and thermal oxidation approaches. Recent progress in several key types of leading-edge applications of CuO nanostructures, mostly for energy, sensing and catalysis, is also reviewed. Besides, we briefly outline and stress novel insights into the effect of various process parameters on the growth of low-dimensional copper oxide nanostructures, such as the heating rate, oxygen flow, and roughness of the substrates. These insights play a key role in establishing links between the structure, properties and performance of the nanomaterials, as well as finding the cost-and-benefit balance for techniques that are capable of fabricating low-dimensional CuO with the desired properties and facilitating their integration into more intricate material architectures and devices without the loss of original properties and function.

Hydrogen production via photoreforming of wastewater under LED light-driven over CuO@exfoliated g-C3N4 nanoheterojunction

As the global interest heading towards net zero emission by 2050, clean hydrogen production technologies becomes limelight among the research community. Besides, the generation of large quantity of industrial wastewaters creates huge dilemma and needs special attention. In this work, synthetic wastewater using formaldehyde (FA) as a model organic pollutant was utilized to produce hydrogen. The photocatalyst, CuO@exfoliated g-C₃N₄ nanoheterojunction was synthesized by an acid treatment and facile chemical precipitation technique. XRD results confirmed the successful formation of exfoliated g-C₃N₄ by expanding the interlayer spacing of the nanosheets via shifting of characteristic peak of graphite towards lower 2θ from 27.97° to 27.04°. Meanwhile, the BET surface area of CuO@exfoliated g-C₃N₄ (199.3 m²/g) was remarkably enhanced as compared to bulk g-C₃N₄ (34.5 m²/g) and exfoliated g-C₃N₄ (104.4 m²/g). The existence of large pores (3.55 cm³/g) in CuO@exfoliated g-C₃N₄ promotes the accessibility of reactant to the surface active sites, escalating the redox reactions. Study on hydrogen production via photoreforming of aqueous formaldehyde over the prepared photocatalysts were conducted. Interestingly, hydrogen generated using CuO@exfoliated g-C₃N₄ (3867 μmol/g) was greatly enhanced by 7 times and 13 times than the counterparts catalysts, exfoliated g-C₃N₄ (532 μmol/g) and pure CuO (271 μmol/g) respectively. By employing the CuO@exfoliated g-C₃N₄ nanoheterojunction, the optimum hydrogen with apparent quantum efficiency (AQE) of 5664 μmol/g and 22% were obtained respectively. Besides, S-scheme reaction mechanism was proposed based on heterojunction formed between the p-type CuO and n-type exfoliated g-C₃N₄ nanosheets.

Photocatalytic activity of CuO nanoparticles for organic and inorganic pollutants removal in wastewater remediation

Heterogeneous photocatalysis is a promising technology for eradicating organic, inorganic, and microbial pollutants in water and wastewater remediation. It is a more preferable method to other conventional wastewater treatment approaches on account of its low cost, environmental benignity, ability to proceed at ambient temperature and pressure conditions, and capability to completely degrade pollutants under appropriate conditions into environmentally safe products. In heterogeneous photocatalysis, pollutant removal is mainly induced by in-situ generated reactive radicals and their subsequent attack when energetic radiation impinges on the semiconductor catalyst. As such, for the effective and economical removal of wastewater pollutants, the employed catalyst should have high photonic efficiency, less toxic, abundant, chemically and photochemically stableand visible light active. Copper (II) oxide (CuO) is one among such promising compounds and its photocatalytic performance has been hampered primarily by rapid recombination and slow mobility of photogenerated charge carriers. So, this review provides an overview of the strategies adopted to mitigate the aforementioned drawbacks and also other operational parameters to boost its catalytic activity towards the elimination of toxic organic and inorganic metal ion contaminants in an aqueous media.

New insight into the kinetic study on the different loadings of the CuO/CNT catalyst and its optimization for p-chloroaniline photodegradation

The effect of the copper (Cu) content on Cu oxide loaded onto a carbon nanotube (CuO/CNT) catalyst on the mechanistic, kinetic, and photonic efficiency of the photodegradation of p-chloroaniline (PCA) under visible (Vis) and ultraviolet (UV) light irradiation has been explored. For low-loading (1-5 wt%) CuO/CNTs, photodegradation performed better under UV (>84%) rather than the Vis system; this may be due to the presence of abundant defect sites on both CuO and CNTs, which allowed the multielectron reduction of oxygen at their impurity levels to generate more hydrogen peroxide and subsequent ·OH radicals. The active species under UV were in the following order: h⁺ ≫ e^- > ·OH, while it was vice versa for the Vis system with a well-balanced 50 wt% CuO/CNT catalyst that exhibited a similar performance. The kinetic study showed the transition of the kinetic order from the zeroth to the first order on increasing the PCA concentration under the Vis system and vice versa for the UV system. The Thiele modulus (ϕ) further confirmed that the effect of internal mass transfer was negligible under UV light. In contrast, the transition from mass transfer to kinetic control limitation was observed under the Vis system. The optimum PCA degradation predicted from the response surface analysis was 97.36% at the reaction pH of 7.3, catalyst dosage of 0.45 g L^-1, and initial PCA concentration of 11.02 mg L^-1. The condition obtained was fairly close to the forecasted value with an error of 0.26%.

Hydroxyl radical and carbonate radical facilitate chlortetracycline degradation in the bio-photoelectrochemical system with a bioanode and a Bi2O3/CuO photocathode using bicarbonate buffer

The single-chamber bio-photoelectrochemical system (BPES) with a bioanode and a Bi₂O₃/CuO photocathode is developed for chlortetracycline (CTC) degradation under simulated solar irradiation, using phosphate buffer solution (PBS) or NaHCO₃ as buffer solution. The optimized Bi₂O₃/CuO photocathode possesses rich vacancies, great photoresponse capability, and exhibits great photocatalytic activity toward CTC degradation due to its Z-scheme structure. Electron spin-resonance spectroscopy (ESR) and reactive species trapping experiments reveal that superoxide radicals/hydroxyl radicals are both the main radicals contributing to CTC degradation. Moreover, carbonate radical plays a more effective role toward CTC degradation, resulting in 40% improvement for CTC degradation in the BPES within 2 h. Higher current density (maximum of 137.6 A m^-2) and more negative cathode potential are obtained from the illuminated BPES with NaHCO₃ buffer. Possible mechanism and pathways of CTC degradation are proposed. This study contributes to the development of BPESs for antibiotics degradation.

Highly Efficient and Sustainable ZnO/CuO/g-C3N4 Photocatalyst for Wastewater Treatment under Visible Light through Heterojunction Development

Dye-containing pollutants are currently a threat to the environment, and it is highly challenging to eliminate these dyes photocatalytically under visible light. Herein, we designed and prepared a ZnO/CuO/g-C3N4 (ZCG) heterostructure nanocomposite by a co-crystallization procedure and applied it to eliminate pollutants from wastewater via a photocatalytic scheme. The structural and morphological features of the composite confirmed the formation of a ZCG nanocomposite. The photocatalytic capability of the ZCG photocatalyst was investigated via the decomposition of methylene blue dye. The outstanding activity level of 97.46% was reached within 50 min. In addition, the proficiency of the ZCG composite was 753%, 392%, 156%, and 130% higher than photolysis, g-C3N4, CuO, and ZnO, respectively. Furthermore, the photodeterioration activity on Congo red was also evaluated and found to be excellent. The enhanced catalytic achievement is attributed to the construction of heterojunctions among the constituent compounds. These properties boost the charge transfer and decrease the recombination rate. Moreover, the reusability of the ZCG product was explored and a negligible photoactivity decline was detected after six successful runs. The outcomes suggest the as-prepared nanocomposite can be applied to remove pollutants, which opens a new door to practical implementation.

Effect of the organic sulfur source on the photocatalytic activity of CdS

By controlling the species of the organic sulfur source, CdS samples were produced with different photocatalytic performances by a low-temperature solvothermal method.

Synthesis and characterization of CuxO/Bi2O3 oxides for removal of HCHO under visible light irradiation

Cu_xO/Bi₂O₃ oxides grown on nickel foam were synthesized via an electrodeposition method to degrade indoor HCHO under visible light irradiation and fully characterized by XRD, SEM, FT-IR, and UV-Vis technologies. The characterization results showed that the Cu_xO/Bi₂O₃ oxides were successfully loaded on nickel foam and the visible light response spectrum was expanded to 740 nm. Plackett-Burman design combined with central composite design has been used to optimize factors that affect HCHO removal performance. The results demonstrated that bismuth nitrate content, polyethylene glycol 600 content, sintering time, and lactic acid concentration were the four most important factors affecting the HCHO removal performance over Cu_xO/Bi₂O₃ sample. The optimum Cu_xO/Bi₂O₃ sample could degrade 88.796% of HCHO in 300 min at the conditions of 4.28 mol/L lactic acid, 4.86% polyethylene glycol 600, 194.03 min sintering time, and 45.83 g bismuth nitrate, and the HCHO removal rate remained 82.3% after five cycles. A plausible mechanism for the degradation of HCHO under visible light irradiation was proposed. This work provides a feasible solution for removing indoor formaldehyde in the field of photocatalysis.

Efficient visible light photocatalytic NO abatement over SrSn(OH)6 nanowires loaded with Ag/Ag2O cocatalyst

SrSn(OH)₆ (SSOH) possesses a high oxidation potential in the valence band (VB), which is suitable for photocatalytic oxidation removal of pollutants. However, the electrons in the VB of these catalysts are difficult to transition to the conduction band (CB) under visible light, which makes it difficult to utilize sunlight effectively. In this work, Ag/Ag₂O is loaded on the surface of SSOH nanowires, which stimulates the interfacial charge-transfer transition on SSOH. Compared with pure-phase SSOH, the NO abatement ratio of Ag/Ag₂O-SSOH under visible light irradiation is increased to 45.10%. The e^- in the VB of Ag₂O are excited into the CB under visible light, and are further transferred to the Ag to react with O₂ to produce superoxide radicals. The photo-excited e^- in the VB of SSOH enter into the VB of Ag₂O through interfacial charge-transfer transition to recombine with the photo-generated holes in the VB of Ag₂O, thereby leaving photo-generated holes in the VB of SSOH. The holes in the VB of SSOH have sufficient oxidizing ability to oxidize the adsorbed hydroxyl groups into hydroxyl radicals. This work provides a new perspective for photocatalytic removal of pollutants by wide band gap photocatalyst under visible light.

Augmentation of microbial fuel cell and photocatalytic polishing technique for the treatment of hazardous dimethyl phthalate containing wastewater

In the present paper, the potentiality of integrating microbial fuel cells (MFCs) with a photocatalytic reactor to maximize the wastewater treatment efficiency with concurrent power generation was explored. Dimethyl phthalate (DMP) and acetic acid (AA) were the employed substrate and the co-substrate, respectively, using Pseudomonas aeruginosa as a biocatalyst. MFCs operated by single substrate showed the maximum power generation of 0.75-3.84 W m^-3 whereas an addition of AA as the co-substrate yielded 3-12 fold higher power generation. Pseudomonas aeruginosa produced phenazine-1-carboxylic acid in DMP-fed MFC as the metabolite whereas AA along with DMP yielded pyocyanin which reduced the charge transfer resistance. Chemical oxygen demand (COD) removal efficiency in the MFCs was circa 62% after 11 days of operation. Thereafter, it further increased albeit with a drastic reduction in power generation. Subsequently, the MFC anolyte was treated in a photocatalytic reactor under visible light irradiation and catalyzed by CuO-gC₃N₄. The performance of photocatalytic reactor was evaluated, with COD and total organic carbon (TOC) removal efficiency of 88% and 86% after 200 min of light irradiation. The present work suggests that the MFC can be integrated with photocatalysis as a sustainable wastewater treatment method with concurrent power generation.

Fabrication of S-scheme CdS-g-C3N4-graphene aerogel heterojunction for enhanced visible light driven photocatalysis

Constructing S-scheme heterojunction photocatalysts reveals a greatly improved separation efficiency of photogenerated carriers and enhanced harvesting ability of solar energy in photocatalytic field. Herein, a ternary CdS-g-C₃N₄-GA heterojunction has been fabricated by a facile ultrasound strategy, which behaved as a S-scheme heterojunction with an intimate interface formed, and GA played as an electronic transportation platform to promote the separation of photo-induced charge carriers, which was certified through photoelectrochemical techniques. Density functional theory calculations revealed that the different component in ternary CdS-g-C₃N₄-GA heterojunction demonstrated an obvious difference of work function, resulting in the charge transfer from CdS to g-C₃N₄ through GA with S-scheme principle. In the optimized conditions, the S-scheme CdS-g-C₃N₄-GA heterojunction not only displayed greatly enhanced photocatalytic performances for degradation of dye and antibiotic wastewater, but also improved photocatalytic H₂ production activity. In addition, the photocatalytic mechanism and driving force of charge transfer and separation in S-scheme CdS-g-C₃N₄-GA heterojunction were studied. This study offers a feasible strategy to construct a ternary S-scheme heterojunction for environmental and energy photocatalysis.