Facile preparation of robust dual MgO-loaded carbon foam as an efficient adsorbent for malachite green removal

Persulfate enhanced removal of bisphenol A by copper oxide/reduced graphene oxide foam: Influencing factors, mechanism and degradation pathway

The CuO/reduced graphene oxide foam (CuO/RGF) with excellent recyclability was prepared via hydrothermal method followed by freeze drying treatment for bisphenol A (BPA) removal via activating peroxydisulfate (PDS). SEM, XRD, XPS, FT-IR, BET, and TG techniques were used to investigate the structure and property of CuO/RGF. The effect of degradation conditions (pH, PDS amount, Cl-, HCO3-, HA and FA) on BPA removal by CuO/RGF were investigated. The result presented that CuO nanosheet was inserted into the RGF carrier with three-dimensional structure. The degradation rate constant of BPA over CuO/RGF (0.00917 min-1) was 1.24 and 6.46 times higher than those of BPA over CuO (0.00714 min-1) and RGF (0.00142 min-1). More importantly, the pore structure of RGF can successfully limit the release of Cu (II) compared to pure CuO. According to quenching test as well as electron spin resonance (EPR) spectra, BPA degradation was triggered by 1O2, •OH and SO4•-, which was the combination of nonradical (1O2) and radical activation of PDS (•OH and SO4•-). The possible degradation route of BPA was proposed based on intermediates obtained by combining solid phase extraction pretreatment technique with high performance liquid-mass spectrometry. After assessing the viability of MCF-7 cells, we can see that the estrogenic activities of treated solution reduced without producing stronger endocrine disruptors.

The Removal of Pollutants from Wastewater Using Magnetic Biochar: A Scientometric and Visualization Analysis

In recent years, the use of magnetic biochar in wastewater treatment has shown significant effects and attracted scholars' attention. However, due to the relatively short research time and the lack of systematic summaries, it is difficult to provide a more in-depth analysis. This study utilizes RStudio and CiteSpace software to comprehensively analyze the research trends and progress of magnetic biochar in wastewater treatment. The analysis of bibliometrics is performed on 551 relevant papers retrieved from the Web of Science, spanning the period between 2011 and 2022. The most influential countries, institutions, journals, disciplinary distribution, and top 10 authors and papers in this field have been identified. The latest dataset has been used for keyword clustering and burst analysis. The results indicated that: (1) Bin Gao is the most influential author in this field, and high-level journals such as Bioresource Technology are more inclined to publish articles in the field of magnetic biochar. (2) Research in this field has predominantly focused on the removal of heavy metals and organic compounds. Keyword burst analysis shows a shift in research direction towards the removal of complex organic pollutants recently. (3) For the future development of magnetic biochar, an environment-friendly approach, economic viability, and joint technology are the directions that need more exploration. Finally, this paper provides a summary of the various adsorption mechanisms of magnetic biochar and several common modification methods, aiming to assist scholars in their research endeavors.

Reutilization of waste biomass from sugarcane bagasse and orange peel to obtain carbon foams: Applications in the metal ions removal

The high levels of heavy metals contained in residual water and the pollution generated by a large amount of unexploited agro-industrial waste are a serious problem for the environment and mankind. Therefore, in the present work, with the aim of treating and reducing the pollution caused by heavy metal ions (Pb, Cd, Zn and Cu), activated carbons (ACs) were synthesized from sugarcane bagasse (SCB) and orange peel (OP) by means of physical - chemical activation method in an acid medium (H₃PO_4, 85 wt%) followed by an activation at high temperature (500 and 700 °C). Thereafter, these materials were used to produce carbon foams (CF) by the replica method and to evaluate their adsorbent capacity for the removal of heavy metals from synthetic water. XRD, FTIR, DLS, BET, Zeta Potential (ζ), SEM-EDS and AAS were used to investigate their structures, surface area, pore size, morphology, and adsorption capacity. The results show that as-prepared CF have a second level mesoporous structure and AC present a micro-mesoporous structure with a pore diameter between 3 and 4 nm. The experimental adsorption capacities of heavy metals showed that the CF from OP present a better elimination of heavy metals compared to the AC; exhibiting a removal capacity of 95.2 ± 3.96% (Pb) and 94.7 ± 4.88% (Cu) at pH = 5. The adsorption values showed that the optimal parameters to reach a high metal removal are pH values above 5. In the best of cases, the minimum remaining concentration of lead and copper were 2.4 and 2.6 mg L^-1, respectively. The experimental data for carbon adsorbents are in accordance with the Langmuir and BET isotherms, with R² = 0.99 and the maximum homogenous biosorption capacity for lead and copper was Q_max = 968.72 and 754.14 mg g^-1, respectively. This study showed that agro-industrial wastes can be effectively retrieved to produce adsorbents materials for wastewater treatment applications.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Enhanced Removal of Malachite Green Using Calcium-Functionalized Magnetic Biochar

To efficiently remove malachite green (MG), a novel calcium-functionalized magnetic biochar (Ca/MBC) was fabricated via a two-step pyrolysis method. Iron-containing oxides endowed the target complexes with magnetic properties, especially the chemotactic binding ability with MG, and the addition of calcium significantly changed the morphology of the material and improved its adsorption performance, especially the chemotactic binding ability with MG, which could be confirmed through FTIR, XPS, and adsorption experiments. Electrostatic adsorption, ligand exchange, and hydrogen bonding acted as essential drivers for an enhanced adsorption process, and the maximum theoretical adsorption capacity was up to 12,187.57 mg/g. Ca/MBC maintained a higher adsorption capacity at pH = 4–12, and after five adsorption–desorption cycles, the adsorption capacity and adsorption rate of MG remained at 1424.2 mg/g and 71.21%, highlighting the advantages of Ca/MBC on adsorbing MG. This study suggests that biochar can be modified by a green synthesis approach to produce calcium-functionalized magnetic biochar with excellent MG removal capacity. The synthetic material can not only remove pollutants from water but also provide an efficient way for soil remediation.

Utilization of Ag2O-Al2O3-ZrO2 decorated onto rGO as adsorbent for the removal of Congo red from aqueous solution

The water resources contamination in an alarming concern for sustainable environment. This has led to development of new technologies and materials for waste water detoxification. In the present study, we have fabricated novel trimetallic based mixed oxides decorated reduced graphene oxide (rGO) composite using facile microwave method and utilized it as an adsorbent for the removal of congo red dye from aqueous solution. The final composite showed highly agglomerated metal oxides present on the rGO surface. The high surface area and activity of the synthesized adsorbent resulted in its high adsorption capacity of 333.32 mg/g for congo red. The Langmuir model better explained the isotherm data indicating the monolayer adsorption of congo red molecules onto Ag₂O-Al₂O₃-ZrO₂/rGO surface. The grander adsorption ability of Ag₂O-Al₂O₃-ZrO₂/rGO towards organic dye indicate its probable utilization in the removal of other dyes also from wastewater.