Degradation of ciprofloxacin by the Mn cycle system (MnCS): Construction, characterization and bacterial analysis

Characteristics of biological manganese oxides produced by manganese-oxidizing bacteria H38 and its removal mechanism of oxytetracycline

Oxytetracycline (OTC) is widely used in clinical medicine and animal husbandry. Residual OTC can affect the normal life activities of microorganisms, animals, and plants and affect human health. Microbial remediation has become a research hotspot in the environmental field. Manganese oxidizing bacteria (MnOB) exist in nature, and the biological manganese oxides (BMO) produced by them have the characteristics of high efficiency, low cost, and environmental friendliness. However, the effect and mechanism of BMO in removing OTC are still unclear. In this study, Bacillus thuringiensis strain H38 of MnOB was obtained, and the conditions for its BMO production were optimized. The optimal conditions were determined as follows: optimal temperature = 35 °C, optimal pH = 7.5, optimal Mn(Ⅱ) initial concentration = 10 mmol/L. The results show that BMO are irregular or massive, mainly containing MnCO3, Mn2O3, and MnO2, with rich functional groups and chemical bonds. They have the characteristics of small particle size and large specific surface area. OTC (2.5 mg/L) was removed when the BMO dosage was 75 μmol/L and the solution pH was 5.0. The removal ratio was close to 100 % after 12 h of culture at 35 °C and 150 r/min. BMO can adsorb and catalyze the oxidation of OTC and can produce ·O2-, ·OH, 1O2, and Mn(Ⅲ) intermediate. Fifteen products and degradation pathways were identified, and the toxicity of most intermediates is reduced compared to OTC. The removal mechanism was preliminarily clarified. The results of this study are convenient for the practical application of BMO in OTC pollution in water and for solving the harm caused by antibiotic pollution.

Removal of thallium by MnOx coated limestone sand filter through regeneration of KMnO4: Combination of physiochemical and biochemical actions

Treatment of industrial thallium(Tl)-containing wastewater is crucial for mitigating environmental risks and health threats associated with this toxic metal. The incorporation of Mn oxides (MnOx) into the filtration system is a promising solution for efficient Tl(I) removal. However, further research is needed to elucidate the underlying mechanism behind MnOx-enhanced filtration and the rules of its stable operation. In this study, limestone, a cost-effective material, was selected as the filter media. Raw water with Mn(II), Tl(I), and other pollutants was prepared after a thorough investigation of actual industrial wastewater conditions. KMnO4 was added to induce the formation of MnO2 on limestone surfaces, while long-term operation led to enrichment of manganese oxidizing microorganisms (MnOM). Results revealed a dual mechanism. Firstly, most Mn(II) were oxidized by KMnO4 to form MnO2 attaching to limestone sands, and both Tl(I) and residual Mn(II) were adsorbed onto the newly formed MnO2. Subsequently, enzymes secreted by MnOM facilitated oxidation of remaining Mn(II), resulting in the generation of biogenic manganese oxides (BioMnOx) with numerous vacancies during long-term operation. The generated BioMnOx not only adsorbed Mn(II) and Tl(I) but also promoted their oxidation process. This approach offers an effective and sustainable method for removing both Mn(II) and Tl(I) from industrial wastewater, thereby addressing the challenges posed by thallium-contaminated effluents.

Induced transformation of antimony trioxide by Mn(II) oxidation and their co-transformed mechanism

Antimony (Sb) is a toxic and carcinogenic element that often enters soil in the form of antimony trioxide (Sb₂O₃) and coexists with manganese (Mn) in weakly alkaline conditions. Mn oxides such as birnessite have been found to promote the oxidative dissolution of Sb₂O₃, but few researches concerned the co-transformations of Sb₂O₃ and Mn(II) in environment. This study investigated the mutual effect of abiotic oxidation of Mn(II) and the coupled oxidative dissolution of Sb₂O₃. The influencing factors, such as Mn(II) concentrations, pH and oxygen were also discussed. Furthermore, their co-transformed mechanism was also explored based on the analysis of Mn(II) oxidation products with or without Sb₂O₃ using XRD, SEM and XPS. The results showed that the oxidative dissolution of Sb₂O₃ was enhanced under higher pH and higher Mn(II) loadings. With a lower Mn(II) concentration such as 0.01 mmol/L Mn(II) at pH 9.0, the improved dissolution of Sb₂O₃ was attributed to the generation of dissolved intermediate Mn(III) species with strong oxidation capacity. However, under higher Mn(II) concentrations, both amorphous Mn(III) oxides and intermediate Mn(III) species were responsible for promoting the oxidative dissolution of Sb₂O₃. Most released Sb (∼72%) was immobilized by Mn oxides and Sb(V) was dominant in the adsorbed and dissolved total Sb. Meanwhile, the presence of Sb₂O₃ not only inhibited the removal of Mn(II) by reducing Mn(III) to Mn(II) but also affected the final products of Mn oxides. For example, amorphous Mn oxides were formed instead of crystalline Mn(III) oxides, such as MnOOH. Furthermore, rhodochrosite (MnCO₃) was formed with the high Mn(II)/Sb₂O₃ ratio_, but without being observed in the low Mn(II)/Sb₂O₃ ratio. The results of study could help provide more understanding about the fate of Sb in the environment and the redox transformation of Mn.

Application of manganese oxides in wastewater treatment: Biogeochemical Mn cycling driven by bacteria

Manganese oxides (MnOx) are recognized as a strongest oxidant and adsorbent, of which composites have been proved to be effective in the removal of contaminants from wastewater. This review provides a comprehensive analysis of Mn biochemistry in water environment including Mn oxidation and Mn reduction. The recent research on the application of MnOx in the wastewater treatment was summarized, including the involvement of organic micropollutant degradation, the transformation of nitrogen and phosphorus, the fate of sulfur and the methane mitigation. In addition to the adsorption capacity, the Mn cycling mediated by Mn(II) oxidizing bacteria and Mn(IV) reducing bacteria is the driving force for the MnOx utilization. The common category, characteristics and functions of Mn microorganisms in recent studies were also reviewed. Finally, the discussion on the influence factors, microbial response, reaction mechanism and potential risk of MnOx application in pollutants' transformation were proposed, which might be the promising opportunities for the future investigation of MnOx application in wastewater treatment.

A Review of Manganese-Oxidizing Bacteria (MnOB): Applications, Future Concerns, and Challenges

Groundwater serving as a drinking water resource usually contains manganese ions (Mn2+) that exceed drinking standards. Based on the Mn biogeochemical cycle at the hydrosphere scale, bioprocesses consisting of aeration, biofiltration, and disinfection are well known as a cost-effective and environmentally friendly ecotechnology for removing Mn2+. The design of aeration and biofiltration units, which are critical components, is significantly influenced by coexisting iron and ammonia in groundwater; however, there is no unified standard for optimizing bioprocess operation. In addition to the groundwater purification, it was also found that manganese-oxidizing bacteria (MnOB)-derived biogenic Mn oxides (bioMnOx), a by-product, have a low crystallinity and a relatively high specific surface area; the MnOB supplied with Mn2+ can be developed for contaminated water remediation. As a result, according to previous studies, this paper summarized and provided operational suggestions for the removal of Mn2+ from groundwater. This review also anticipated challenges and future concerns, as well as opportunities for bioMnOx applications. These could improve our understanding of the MnOB group and its practical applications.

Interactions between anthropogenic pollutants (biodegradable organic nitrogen and ammonia) and the primary hydrogeochemical component Mn in groundwater: Evidence from three polluted sites

Anthropogenic pollutants (organic nitrogen and ammonia) can change the dynamic balances of hydrogeochemical components of groundwater, and this can affect the fates of the pollutants and groundwater quality. The aim of this paper is to assess the long-term impact of pollutants on groundwater component concentrations and species in three sites that has been polluted with illegal discharge wastewater containing organic nitrogen and ammonia, in order to reveal the interactions between nitrogen species and Mn. We analyzed semi-monthly groundwater data from three sites in northwestern China over a long period of time (2015-2020) by using statistical analyses, correlation analyses, and a correlation co-occurrence network method. The results showed that wastewater entering groundwater from surface changed the hydrogeochemical component concentrations and species significantly. The main form of inorganic nitrogen species changed from nitrate to ammonia. The Mn concentration increased from undetectable (<0.01 mg/L) to 1.64 mg/L (the maximum), which surpassed the guideline value suggested by China and WHO. The main mechanism for Mn increase is the reductive dissolution of Mn oxide caused by the oxidation of organic nitrogen. Mn‑nitrogen species interaction complicates the transformation of nitrogen components. Chemoautotrophic denitrification and dissimilatory nitrate reduction to ammonium (DNRA) mediated by Mn are the major mechanisms of nitrate attenuation when dissolved oxygen is greater than 2 mg/L. Mn oxides reductive dissolution and reoxidation of Mn by nitrate reduction cause Mn to circulate in groundwater. The results provide field evidence for interactions between nitrogen species transformation and Mn cycle in groundwater. This has important implications for pollution management and groundwater remediation, particularly monitored natural attenuation.

Removal of Ciprofloxacin from Wastewater by Ultrasound/Electric Field/Sodium Persulfate (US/E/PS)

Ciprofloxacin (CIP), as a common antibiotic used in human clinical and livestock farming, is discharged into natural water bodies and its concentration has increased in the last years. Its stable chemical structure is difficult to remove by conventional techniques. Residual ciprofloxacin in the environment has become an emerging micropollutant that promotes the generation of resistance genes of bacteria and endangers ecosystem balance and human health. Removal of ciprofloxacin from water by the system of ultrasound/electric field/sodium persulfate (US/E/PS) was investigated. Firstly, CIP degradation affects by different oxidation methods, such as ultrasonic oxidation, electro-oxidation, and persulfate oxidation, and their four combined oxidation methods (ultrasound-activated persulfate oxidation, electro-activated persulfate oxidation, ultrasound-enhanced electro-oxidation, and ultrasound-enhanced electro-activated persulfate oxidation), on the target contaminants were compared. Secondly, the influences of parameters on the CIP degradation by an ultrasound-enhanced electro-activation-persulfate reaction system were investigated. Thirdly, the possible free radical species in the ultrasound-enhanced electro-activation-sulfate reaction system were identified and the dominant free radical species in the system were analyzed. Finally, the samples of CIP in the US/E/PS system were tested by liquid mass spectrometry, and the possible intermediate products and degradation path were speculated. The results indicate that the US/E/PS system is of great potential application value in the removal of organic pollution and environmental purification.