Enhanced photodegradation of doxycycline (DOX) in the sustainable NiFe2O4/MWCNTs/BiOI system under UV light irradiation

Fabrication of porous and defect-rich BiOI/MWCNTs photocatalyst by Ar plasma-etching for emerging pollutants degradation

Carbon material modification and defect engineering are indispensable for bolstering the photocatalytic effectiveness of bismuth halide oxide (BiOX). In this study, a novel porous and defect-rich Ar-CB-2 photocatalyst was synthesized for emerging pollutants degradation. Leveraging the interfacial coupling effect of multi-walled carbon nanotubes (MWCNTs), we expanded the absorption spectrum of BiOI nanosheets and significantly suppressed the recombination of charge carriers. Introducing defects via Argon (Ar) plasma-etching further bolstered the adsorption efficacy and electron transfer properties of photocatalyst. In comparison to the pristine BiOI and CB-2, the Ar-CB-2 photocatalyst demonstrated superior photodegradation efficiency, with the first-order reaction rates for the photodegradation of tetracycline (TC) and bisphenol A (BPA) increasing by 2.83 and 4.53 times, respectively. Further probe experiments revealed that the steady-state concentrations of ·O2- and 1O2 in the Ar-CB-2/light system were enhanced by a factor of 1.67 and 1.28 compared to CB-2/light system. This result confirmed that the porous and defect-rich structure of Ar-CB-2 inhibited electron-hole recombination and boosted photocatalyst-oxygen interaction, swiftly transforming O2 into active oxygen species, thus accelerating their production. Furthermore, the possible degradation pathways for TC and BPA in the Ar-CB-2/light system were predicted. Overall, these findings offered a groundbreaking approach to the development of highly effective photocatalysts, capable of swiftly breaking down emerging pollutants.

Construction of p-n-p nano heterojunction through coupling La2O3, (BiO)2CO3 and Ag3PO4 for effective photocatalytic degradation of doxycycline: Insights into mechanism, pathway and intermediate toxicity evaluation

The present work is centred around the development of La2O3/(BiO)2CO3/Ag3PO4 (LBA), a p-n-p nano-heterojunction to photodegrade doxycycline under visible light irradiation. Here, ultrasonication assisted co-precipitation method was employed to synthesize the photocatalyst. The photocatalyst was characterized using different analysis such as SEM, TEM, elemental mapping, XRD, XPS, FTIR, Raman, BET, DRS, PL and EIS which confirmed the successful fabrication of LBA and their excellent ability to refrain the e-/h+ recombination owing to the construction of the heterojunction. LBA was found to degrade DOX by 91.75 % with the high mineralization of 87.23%. The impact of the reaction parameters influencing the photodegradation process including the concentration of the NCs and DOX, pH and the influence of the commonly present anions were studied. The stability and reusability of the LBA was assessed through subjecting it to four cycles of photodegradation of DOX. In addition, the recovered LBA was characterized through XPS and XRD analysis to confirm the particles stability and reusability. The active participation of the photogenerated charges and the reactive oxygen species were identified through the scavenging assay and ESR analysis. Further, GC-MS/MS analysis was performed to put forward a plausible photodegradation pathway. The toxicity of the end products as well as the intermediates was predicted through ECOSAR software.

Facile Hydrothermal Synthesis of BiVO4/MWCNTs Nanocomposites and Their Influences on the Biofilm Formation of Multidrug Resistance Streptococcus mutans and Proteus mirabilis

This study utilized a simple hydrothermal technique to prepare pure BiVO4 and tightly bound BiVO4/multiwalled carbon nanotubes (MWCNTs) nanocomposite materials. The surfactant was employed to control the growth, size, and assembly of BiVO4 and the nanocomposite. Various techniques including X-ray diffraction (XRD), Ultraviolet-visible (UV-vis), photoluminescence (PL), Raman, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were utilized to analyze and characterize BiVO4 and the BiVO4/MWCNTs nanocomposite. Through XRD analysis, it was found that the carbon nanotubes were effectively embedded within the lattice of BiVO4 without generating any separate impurity phase and had no influence on the BiVO4 monoclinic structure. TEM images confirmed the presence of MWCNTs within BiVO4. Furthermore, adding MWCNTs in the BiVO4/MWCNTs nanocomposite resulted in an effective charge transfer transition and improved carrier separation, as evidenced by PL analysis. The introduction of MWCNTs also led to a significant reduction in the optical band gap due to quantum effects. Finally, the antibacterial activity of pure BiVO4 and the BiVO4/MWCNTs nanocomposite was assessed by exposing Proteus mirabilis and Streptococcus mutans to these materials. Biofilm inhibition and antibiofilm activity were measured using a crystal violet assay and a FilmTracer LIVE/DEAD Biofilm Viability Kit. The results demonstrated that pure BiVO4 and BiVO4/MWCNTs effectively inhibited biofilm formation. In conclusion, both pure BiVO4 and BiVO4/MWCNTs are promising materials for inhibiting the bacterial biofilm during bacterial infections.

Techno-economic assessment of doxycycline recovery using rice straw biochar: A circular economic execution

The non-scientific disposal of antibiotics has resulted in massive contamination of the bioactive molecules in the aquatic ecosystem. The presence of antibiotics in the effluents limits the biodegradation of micropollutants by affecting the micro-ecological balance. Hence this study aims to remove doxycycline antibiotics from wastewater using biochar. Elemental analysis of the biochar revealed C, Si and N as most abundant content while BET analysis confirmed the mesoporous nature of the adsorbent. The XRD and Raman spectra confirmed amorphic sp2 carbon dominant structure in the biochar. The adsorption mechanism was predicted, correlating the charge distribution and FTIR analysis. The effects of different process parameters were studied using CCD, ANOVA, and RSM. Moreover, the different kinetic models revealed that the pseudo-second-order kinetics model was the best fit and film layer diffusion was the dominant contributor. The isotherm study indicated the high adsorption capacity of the biochar and its non-ionic nature. Thermodynamics study established the spontaneity and exothermic nature. The results suggested no significant change in antibiotic removal efficiency across different system (pond water (97.13%), river water (98.11%), seawater (96.84%), tap water (99.13%), and distilled water (99.74%)). For the desorption of the antibiotic from the biochar surface, 90% ethanol was the most efficient (98.9%), and upon recrystallization by solvent evaporation, 98.7% of the antibiotic of the initial load was recovered. Hence, the implementation of this described process would enable resource recovery along with water treatment, which is not possible with existing approaches. The cost analysis of the whole process revealed that biochar preparation was the bulk expense and the process would be self-sustainable even if the price of the recovered antibiotic would be set at less than half ($41/kg) of the current market price ($94/kg) of the API. Thus, the process endorses a successful circular economy approach toward societal and economic sustainability.

"Magnetic Ni-Zn ferrite anchored on g-C3N4 as nano-photocatalyst for efficient photo-degradation of doxycycline from water"

In the present work, mixed-spinel ferrite anchored onto graphitic carbon nitride (GCN) was synthesized for mineralization of antibiotic pollutant from waste water. A Z-scheme g-C₃N₄/Ni_0.5Zn_0.5Fe₂O₄ nano heterojunction was fabricated by three step procedure: pyrolysis, solution combustion and mechanical grinding followed by annealing. The prepared photocatlyst was tested for degradation of Doxycycline (DC) drug under the natural sun light. Results revealed that the prepared heterojunction has maximum degradation efficiency of 97.10% pollutant in 60 min experiment. The Z-scheme heterojunction between g-C₃N₄ and Ni-Zn ferrite improves the photoinduced charges separation and protection of redox capability and therby increases the photo degradation efficiency. The scavenging experiments suggested that O₂^-● and h⁺ as main active species responsible for degradation of the antibiotic. In addition, the dopant variation can drive the shists in band gap and energy band positiong too which makes then excellent candidates for synthesizing tunable heterostructures with organic semiconductors. The work focusses on designing and developing of saimpler but efficient magnetic heterojunctions with superior redox capability for solar powered waste water treatment.

The characterization of a novel magnetic biochar derived from sulfate-reducing sludge and its application for aqueous Cr(Ⅵ) removal through synergistic effects of adsorption and chemical reduction

Removal of heavy metals from the aqueous environment via physiochemical adsorption always remains a great challenge owing to the slow kinetics and low removal capacity for the conventional adsorbent. In this study, the sulfate-reducing bacteria (SRB)-rich anaerobic sludge was pyrolyzed for the preparation of magnetic biochar, i.e. SBC-20-500 (SBC: sulfate-reducing sludge-based biochar; 20 denotes the biochar dosage, namely 8 g dried sludge in 400 mL iron solution which is equal to 20 g/L; 500 represents the pyrolysis temperature, i.e. at 500 °C) with tunable pore structure and surface properties towards efficient removal of chromium (Cr (Ⅵ)). The characterization revealed that magnetic biochar SBC-20-500 exhibited higher surface area and larger pore volume compared to non-magnetic SBC-500. Batch experiments on Cr (Ⅵ) removal were performed under different biochar dosages, pH values, initial Cr (Ⅵ) concentrations and temperatures. The results illustrated that magnetic biochar demonstrated much larger Cr (Ⅵ) adsorption capacity with q_e of 5.3585 mg/g as compared to non-modified one (q_e = 0.7206 mg/g). The maximum Cr (Ⅵ) removal efficiency of SBC-20-500 reached approximately 93.7% within 24 h under the conditions of pH = 3.0, biochar dosage = 0.8 g and initial Cr (Ⅵ) concentration = 50 mg/L. The kinetic and isotherm fitting results suggested that the pseudo-second-order kinetic and Langmuir isotherm model were more suitable for describing the adsorption behavior of Cr (Ⅵ) by SBC-20-500. The XPS and FTIR results confirmed that chemical reduction of Cr (Ⅵ) to Cr (Ⅲ) also played a role in Cr (Ⅵ) removal in the presence of SBC-20-500. Moreover, the Cr (Ⅵ) removal capacity could still achieve 3.50 mg/g even after five adsorption-desorption cycles, indicating the satisfactory reusability of the as-prepared biochar. The results of this study may provide a win-win approach for simultaneous resource recovery from the wasted sulfate-reducing sludge (SRS) and highly-efficient remediation of Cr (Ⅵ)-contaminated environment.

Recent Advances in Carbon-Based Materials for Adsorptive and Photocatalytic Antibiotic Removal

Antibiotics have been a primary environmental concern due to their widespread dispersion, harmful bioaccumulation, and resistance to mineralization. Unfortunately, typical processes in wastewater treatment plants are insufficient for complete antibiotic removal, and their derivatives in effluent can pose a threat to human health and aquatic communities. Adsorption and photocatalysis are proven to be the most commonly used and promising tertiary treatment methods. Carbon-based materials, especially those based on graphene, carbon nanotube, biochar, and hierarchical porous carbon, have attracted much attention in antibiotic removal as green adsorbents and photocatalysts because of their availability, unique pore structures, and superior physicochemical properties. This review provides an overview of the characteristics of the four most commonly used carbonaceous materials and their applications in antibiotic removal via adsorption and photodegradation, and the preparation of carbonaceous materials and remediation properties regarding target contaminants are clarified. Meanwhile, the fundamental adsorption and photodegradation mechanisms and influencing factors are summarized. Finally, existing problems and future research needs are put forward. This work is expected to inspire subsequent research in carbon-based adsorbent and photocatalyst design, particularly for antibiotics removal.

Towards BioMnOx-mediated intra/extracellular electron shuttling for doxycycline hydrochloride metabolism in Bacillus thuringiensis

Doxycycline hydrochloride (DCH) could be continuously removed by Bacillus thuringiensis S622 with the in-situ biogenic manganese oxide (BioMnOx) via oxidizing/regenerating. The DCH removal rate was significantly increased by 3.01-fold/1.47-fold at high/low Mn loaded via the integration of biological (intracellular/extracellular electron transfer (IET/EET)) and abiotic process (BioMnOx, Mn(III) and •OH). BioMnOx accelerated IET via activating coenzyme Q to enhance electrons transfer (ET) from complex I to complex III, and as an alternative electron acceptor for respiration and provide another electron transfer transmission channel. Additionally, EET was also accelerated by stimulating to secrete flavins, cytochrome c (c-Cyt) and flavin bounded with c-Cyt (Flavins & Cyts). To our best knowledge, this is the first report about the role of BioMnOx on IET/EET during antibiotic biodegradation. These results suggested that Bacillus thuringiensis S622 incorporated with BioMnOx could adopt an alternative strategy to enhance DCH degradation, which may be of biogeochemical and technological significance.

Green synthesis of two-electron centre based ZnO/NiCo2S4 QDs-OVs using Punica granatum fruit peel extract for an exceptional visible light photocatalytic degradation of doxycycline and ciprofloxacin

Biosynthesis of nanomaterials using plant extract makes them attractive in the field of photocatalysis as they are environmental friendly. The current study focused on the biosynthesis of ZnO/NiCo₂S₄ QDs (NCs) using Punica granatum fruit peel extract as the reducing agent. The nanomaterials were characterized with XRD, FTIR, Raman, SEM, TEM, UV-vis DRS, BET, PL, EIS, and ESR analysis and were used for photocatalytic degradation of doxycycline (DOX) and ciprofloxacin (CIP). The bandgap of ZnO is 3.2 eV, and the decoration of NiCo₂S₄ QDs aids in narrowing the bandgap (2.8 eV), making the NCs visible light active. The fabricated NCs achieved 99 and 89% degradation of DOX and CIP respectively. The photocatalytic efficiency of ZnO/NiCo₂S₄ QDs was much higher compared to individual ZnO and NiCo₂S₄ QDs. The half-life period of DOX and CIP were evaluated to be 58 and 152 min respectively. The percentage of TOC removal in the photodegraded product of DOX and CIP was estimated to be 99 and 89% respectively, indicating the mineralization of the compounds. The enhanced photocatalytic efficiency of the NCs was attributed to the narrowed visible light active bandgap, synergistic charge transfer across the interface, and lower charge recombination. The intermediates formed during the photocatalytic degradation of DOX and CIP were analyzed using GC-MS/MS analysis, and the photodegradation pathway was elucidated. Also, the toxicity of the intermediates was computationally analyzed using ECOSAR software. The fabricated ZnO/NiCo₂S₄ QDs have excellent stability and reusability, confirmed by XRD and XPS analysis. The reusable efficiency of the NCs for the photocatalytic degradation of DOX and CIP were 98.93, and 99.4% respectively. Thus, the biologically fabricated NCs are shown to be an excellent photocatalyst and have wide applications in environmental remediation.

Enhancement in Photocatalytic Efficiency of Commercial TiO2 Nanoparticles by Calcination: A Case of Doxycycline Removal

In this study, the pure and calcined forms of Degussa TiO2 were applied for photocatalytic removal of doxycycline - a broad-spectrum tetracycline antibiotic. The calcination of TiO2 at 500 °C enhanced the photocatalytic efficiency of the TiO2 under optimal operational conditions of 5 ppm of doxycycline, 0.25 g/L of TiO2, pH 6.5, 120 min, and room temperature. In addition, the changes in morphology, crystal structure, and optical properties of the materials before and after calcination were observed by scanning electron microscopy, X-ray diffraction, and UV-Visible spectroscopy. The reaction kinetics of the doxycycline removal was also investigated based on the Langmuir-Hinshelwood model with a correlation coefficient R2 of >80%. Results showed that the photocatalytic ability of TiO2 is stable and enhanced after being calcined at a suitable temperature of 500 °C. This opens up the potential application of TiO2 in the treatment of emerging organic pollutants in water. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

2D/1D BiOI/g-C3N4 nanotubes heterostructure for photoelectrochemical overall water splitting

To boost the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performances, the BiOI/graphitic carbon nitride nanotubes (g-C₃N₄ nanotubes) heterojunction was synthesized herein through the hydrothermal method. BiOI in-situ grew on the surface of g-C₃N₄ nanotubes derived from melamine. The rapid recombination between photoexcited electrons and holes of pristine semiconductors was prevented via building the stable heterojunction. The SEM results indicated that the BiOI was wrapped around the surface of g-C₃N₄ nanotubes, resulting in an optimized electronic transmission pathway. Much lower charge transfer resistance at the p-n heterojunction was demonstrated compared with pristine BiOI according to the EIS results, thus leading to the faster surface reaction rates. Moreover, the composite exhibited both outstanding OER and HER activities under illuminated conditions. This study may shed light upon establishing a bifunctional photoelectrocatalysis for photoelectrochemical water splitting based on stable 2D metal and 1D metal-free nanocomposite.

Catalytic and non-catalytic degradation of acetaminophen in supercritical water

Pharmaceutical industrial wastewater is typical wastewater consisting of complex organic compounds with higher concentration, microbial toxicity, strenuous to deteriorate, and environmental threatening. The present work assesses the degradation of recalcitrant acetaminophen (ACM) by a green technology known as supercritical water oxidation (SCWO). Experiments were carried out in a continuous flow SCWO reactor by altering reaction conditions such as temperature 400-600 °C, oxidant coefficient (OC 0 to 3), and Fe(II) catalyst concentration (0.5 and 1 mg L^-1) to study the technical feasibility of highly concentrated ACM. Liquid product analysis indicated the total organic carbon (TOC) removal efficiency could reach up to 99.5% without catalyst at 600 °C and 99.9% with Fe(II) at 500 °C. The addition of Fe not only suppressed the intermediate ring components but also promoted the formation of permanent gases via decarboxylation and reforming reactions. The reaction between Fe(II) and H₂O₂ in supercritical water is extremely fast, which has a direct impact on the system's operating conditions. The high activity exhibited by Fe(II) catalyst degraded the ACM completely at an operating condition of 500 °C. Maximum H₂ fraction was attained without catalyst at 600 °C, OC 0.5, and with the catalyst at 500 °C, respectively, whereas, CO₂ tends to rise significantly with both temperature and oxidant concentration. The catalytic process is efficient in comparison to the non-catalytic process. A possible reaction pathway was proposed based on the intermediates generated during the degradation.

In-situ fabrication of ionic liquids/MIL-68(In)-NH2 photocatalyst for improving visible-light photocatalytic degradation of doxycycline hydrochloride

Metal-organic framework (MOFs)-based composites have been popular in photocatalysis due to their outstanding physicochemical properties, such as large surface area, high activity and good transmission properties. Herein, a method of ionic liquids (ILs)-assisted synthesis of IL/MIL-68(In)-NH₂ composite materials were proposed, and composites were used for visible light catalytic degradation of doxycycline hydrochloride (DOXH). The effects of four kinds of ionic liquids on the structure and photocatalytic properties of the composites were explored, including diethylenetriamine acetate ([DETA][OAc]), diethylenetriamine hexafluorophosphate ([DETA][PF₆]), 1-ethyl-3-methylimidazole acetate ([EMIM][OAc]) and 1-ethyl-3-methylimidazole hexafluorophosphate ([EMIM][PF₆]). The results show that the introduction of different ionic liquids affects the grain growth of MOFs material and photocatalytic activity. Among them, IL_DAc/MIL-68(In)-NH₂ samples showed the highest photocatalytic activity. 92% removal rate of doxycycline hydrochloride and kinetic degradation constant (0.00918 min^-1) was observed under the optimal addition of IL_DAc (10 wt%), which was 4.6 times that of MIL-68(In)-NH₂. The enhancement was attributed to a combined effect of efficient adsorption at low concentration, an increase of active sites, and efficient charge transfer. In addition, the effects of pH and initial concentration were investigated. Finally, the photocatalytic mechanism of DOXH was elucidated, and the possible intermediate products and degradation pathways were discussed. Considering the excellent photostability and ultra-fast photodegradation of IL_DAc/MIL-68(In)-NH₂, this study opens up a new prospect for the preparation of ionic liquids functionalized MOFs with wide practical application value.

Green synthesis of manganese-cobalt-tungsten composite oxides for degradation of doxycycline via efficient activation of peroxymonosulfate

The advanced oxidation process of peroxymonosulfate activated by solid catalyst is one of the main technologies to solve the pollution of antibiotics in water environment.In this work, a series of composites (MCW) containing Mn, Co, and W were synthesized using green ball milling, which does not produce the three wastes (waste gas, waste water and industrial residue). It shows a unique and high catalytic activity for peroxymonosulfate-based degradation of doxycycline (DC) under the pH condition between 4 and 9, and it can be reused five times. MCW composites remove DC using singlet oxygen and superoxide free radicals, as well as a large number of oxygen vacancies for electron storage. The formation rate of free radicals is determined by the conversion rates of Mn³⁺/Mn²⁺ and Co³⁺/Co²⁺. In addition, there are three ways to degrade DC to form 18 kinds of intermediates, and the toxicity of all the intermediates were predicted by ECOSAR program. The highly active catalysts obtained using a green synthetic route for the activation of peroxymonosulfate show a great potential for decontamination of antibiotics wastewater.

Subsurface and solid solution-type defect engineering in CoCr2O4-Bi2WO4-NiS2 nanocomposite for visible light degradation of doxycycline and chromium removal and its genotoxic evaluation in Allium cepa

In the present work, ternary CoCr2O4-Bi2WO4-NiS2nanocomposite (CCO-BWO-NS NCs), a semiconductor photocatalyst prepared for the effective minerization of doxycycline and photocatalytic removal of Cr(VI). Here, the modification of BiO-WO4-BiO (BWO) as...

Simple fabrication and unprecedented visible light response of NiNb2O6/RGO heterojunctions for the degradation of emerging pollutants in water

Utilization of environmentally friendly and effective synthesis methods to fabricate visible light responsive photocatalysts with impressive catalytic performance is desirable in photocatalytic water treatment.