Life cycle assessment of combustion-based electricity generation technologies integrated with carbon capture and storage: A review

Simultaneous achievement of energy recovery and carbon sequestration through municipal solid waste management: A review

Effective municipal solid waste (MSW) management is a crucial component for sustainable cities, as inefficient waste disposal contributes to the release of about a billion tons of CO2-eq in greenhouse gases (GHG) annually. With escalating global waste generation, there is an untapped opportunity to integrate carbon dioxide removal (CDR) technologies into existing MSW management processes. This review explores current research on utilizing MSW for CDR, emphasizing its potential for both energy generation and carbon sequestration. The investigation covers three waste management practices: landfilling, waste-to-energy (WtE), and biochar production, revealing two paths for carbon sequestration. First, MSW serves as a feedstock in bioenergy with carbon capture and storage (BECCS), acting as a carbon-neutral resource that avoids fossil fuel and energy crop use, reducing GHG emissions and generating value through energy production. Second, direct storage of organic MSW and its derivatives, like biochar, in various carbon sinks allows for extended sequestration, offering a comprehensive approach to address the challenges of waste management and climate change mitigation. Moreover, this review advocates for an extended exploration into several subjects including in-depth analysis of waste, research on MSW-derived biochar recalcitrance across different carbon sinks, and understanding the symbiotic connections with GHG-emitting sectors like agriculture and energy. Finally, this review emphasizes the necessity of conducting life-cycle assessment studies to fully discern the benefits and assess the impacts of any future endeavors exploring the role of MSW in carbon sequestration.

Aqueous mineral carbonation of three different industrial steel slags: Absorption capacities and product characterization

Heavy carbon industries produce solid side stream materials that contain inorganic chemicals like Ca, Na, or Mg, and other metals such as Fe or Al. These inorganic compounds usually react efficiently with CO2 to form stable carbonates. Therefore, using these side streams instead of virgin chemicals to capture CO2 is an appealing approach to reduce CO2 emissions. Herein, we performed an experimental study of the mineral carbonation potential of three industrial steel slags via aqueous, direct carbonation. To this end, we studied the absorption capacities, reaction yields, and physicochemical characteristics of the carbonated samples. The absorption capacities and the reaction yields were analyzed through experiments carried out in a reactor specifically designed to work without external stirring. As for the physicochemical characterization, we used solid-state Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). Using this reactor, the absorption capacities were between 5.8 and 35.3 g/L and reaction yields were in the range of 81-211 kg CO2/ton of slag. The physicochemical characterization of the solid products with solid FTIR, XRD and SEM indicated the presence of CaCO3. This suggests that there is potential to use the carbonated products in commercial applications.

Magnesium calcites for CO2 capture and thermochemical energy storage using the calcium-looping process

In this study, a precipitation-based synthesis method has been employed to prepare magnesium calcites with the general formula Ca1-xMgxCO3, with the objective of use them in the calcium looping (CaL) process for CO2 capture (CaL-CCS) and thermochemical energy storage (CaL-CSP). The structure and microstructure of the samples have been characterized. It has been found by X-ray diffraction that the samples with a Ca:Mg molar ratio of 0.5:0.5 and 0.55:0.45 are phase pure, while the samples with molar ratios of 0.7:0.3 and 0.8:0.2 are composed by two phases with different stoichiometry. In addition, the sample prepared with calcium alone shows the aragonite phase. The microstructure of the magnesium-containing samples is composed of nanocrystals, which are aggregated in spherical particles whereas the aragonite sample presents a typical rod-like morphology. The multicycle tests carried out under CaL-CCS conditions show that an increase on the MgO content in the calcined samples results in a reduced value of effective conversion when compared to aragonite. On the other hand, under CaL-CSP conditions, the samples with the higher MgO content exhibit nearly stable effective conversion values around 0.5 after 20 cycles, which improve the results obtained for aragonite and those reported for natural dolomite tested under the same conditions.

Oxyfuel Combustion Makes Carbon Capture More Efficient

Fossil energy carriers cannot be totally replaced, especially if nuclear power stations are stopped and renewable energy is not available. To fulfill emission regulations, however, points such as emission sources should be addressed. Besides desulfurization, carbon capture and utilization have become increasingly important engineering activities. Oxyfuel technologies offer new options to reduce greenhouse gas emissions; however, the use of clean oxygen instead of air can be dangerous in the case of certain existing technologies. To replace the inert effect of nitrogen, carbon dioxide is mixed with oxygen gas in the case of such air combustion processes. In this work, the features of carbon capture in five different flue gases of air combustion and such oxyfuel combustion where additional carbon dioxide is mixed with clean oxygen are studied and compared. The five different flue gases originate from the gas-fired power plant, coal-fired power plant, coal-fired combined heat and power plant, the aluminum production industry, and the cement manufacturing industry. Monoethanolamine, which is an industrially preferred solvent for carbon dioxide capture from gas streams at low pressures, is selected as an absorbent, and the same amount of carbon dioxide is captured; that is, always that amount of carbon dioxide is captured, which is the result of the fossil combustion process. ASPEN Plus is used for mathematical modeling. The results show that the oxyfuel combustion cases need significantly less energy, especially at high carbon dioxide removal rates, e.g., higher than 90%, than that of the air combustion cases. The savings can even be as high as 84%. Moreover, 100% carbon capture was also be completed. This finding can be due to the fact that in the oxyfuel combustion cases, the carbon dioxide concentration is much higher than that of the air combustion cases because of the inert carbon dioxide and that higher carbon dioxide concentration results in a higher driving force for the mass transfer. The oxyfuel combustion processes also show another advantage over the air combustion processes since no nitrogen oxides are produced in the combustion process.

A life cycle assessment of coal-fired thermal power plants with post-combustion control techniques: an India scenario

In recent years, there has been a focus on clean power generation, and it is critical to assess the environmental impact of novel technologies used in pollution control in power generation. The study uses life cycle assessment (LCA) to assess the environmental impacts of coal-fired thermal power plants with different emission control techniques in an Indian scenario. As there are no such studies available in the Indian context, this work might provide a holistic view of the impacts of energy generation. A supercritical coal-fired plant with a capacity of 660 MW is considered in this study. The system boundary included coal extraction, transportation, power plant operation, and transmission losses of electricity with a functional unit of 1 kWh. It was observed that there was an energy penalty due to the power consumed in emission control devices, but the maximum energy penalty was due to the power used in the carbon capture system. The LCA is done from "cradle to gate", with impact indicators at the mid-point evaluated using the RECIPE (H) 2016 LCIA method. LCA results showed that power plant operation is the most significant contributor to environmental impact. Initially, in cases 1 and 2, climate change (CC) potential was a major impact category, but CC potential was reduced with carbon capture and storage, 0.27 kg CO2 eq. in case 3 with ESP, FGD, SCR, and carbon capture and storage (CCS) and 0.263 kg CO2 eq. in case 4 with ESP and CCS. But there was a considerable increase in the majority of the impact categories in case 4. Freshwater consumption potential increased from 3.98 E-03 m3 in base case 1 to 4.98 E-03 m3 in case 3 due to the amount of water used in chemical production during CCS, as CC potential is a major concern in power generation, However, compared to case 1, the potential for climate change increased in case 2, whilst in case 4, the potential for climate change is lower but has resulted in an increase in the majority of impact categories. Case 3 shows an optimal approach to reducing CO2 emissions compared to other cases. The combination of ESP, FGD, SCR, and CCS is favourable for cleaner energy generation.

Carbon footprint of low-energy buildings in the United Kingdom: Effects of mitigating technological pathways and decarbonization strategies

There is a limited comprehensive analysis of the effectiveness of adopted carbon mitigation strategies for buildings over their life cycle, that are concerned with temporal perspectives of emissions. Accordingly, this paper explores a life cycle assessment (LCA) to address the concerns regarding mitigating the carbon footprint of a UK timber-frame low-energy dwelling. In particular, it aims to investigate the potential greenhouse gas (GHG) emission reduction in terms of three different heating and ventilation options, and to analyze the influence of decarbonization of electricity production as well as the technological progress of the waste treatment of timber on the building's environmental performance. Thus, the whole life‑carbon of the building case studies was evaluated for a total of eight investigated prospective scenarios, and they were compared to the LCA results of the baseline scenario, where the existing technology and context remained constant over time. Results show that using a compact heat pump would lead to a significant whole life-cycle emission reduction of the dwelling, by 19 %; while GHG emission savings can be reinforced if the assessed systems are employed simultaneously with grid decarbonization, exhibiting a 25 %-60 % reduction compared to the baseline scenario. Moreover, technological changes in the waste treatments of timber products could substantially reduce the buildings' embodied emissions, representing 3 %-23 %. From these emission-saving measures, the contribution of material efficiency strategies to achieve more embodied carbon savings should be highlighted in future construction practices.

Anthropogenic emissions from coal-water slurry combustion: Influence of component composition and registration methods

The flue gas composition is often measured using a combination of techniques that differ in terms of both physical operation principle and type of output. Gas analyzers, FTIR spectrometers, and mass spectrometers are the most popular tools used for this purpose. In this research, we study the composition of the flue gas from the combustion of fuel slurries and dry composite fuels based on industrial and agricultural waste. It has been established that the use of slurry fuels makes the anthropogenic emissions 2-4 times lower than from the combustion of coal slime. For example, the CO₂ emissions from the combustion of dry coal slime were 2.5-3.7 times higher than from the combustion of slurry fuels. In addition, the combustion of slurry fuels made it possible to cut down the nitrogen oxide emissions by 1.3-1.5 times and sulfur oxide emissions by 1.3-2.7 times. A comparison of the results obtained using different measurement techniques has shown that differences between the CO and CO₂ content in the combustion products measured by a gas analyzer and an FTIR spectrometer did not exceed 20%. The use of FTIR spectroscopy provided new knowledge on the concentrations of hydrocarbons from the combustion of fuels based on promising industrial wastes.

Advances in technology and utilization of natural resources for achieving carbon neutrality and a sustainable solution to neutral environment

The greatest environmental issue of the twenty-first century is climate change. Human-caused greenhouse gas emissions are increasing the frequency of extreme weather. Carbon dioxide (CO₂) accounts for 80% of human greenhouse gas emissions. However, CO₂ emissions and global temperature have risen steadily from pre-industrial times. Emissions data are crucial for most carbon emission policymaking and goal-setting. Sustainable and carbon-neutral sources must be used to create green energy and fossil-based alternatives to reduce our reliance on fossil fuels. Near-real-time monitoring of carbon emissions is a critical national concern and cutting-edge science. This review article provides an overview of the many carbon accounting systems that are now in use and are based on an annual time frame. The primary emphasis of the study is on the recently created carbon emission and eliminating sources and technology, as well as the current application trends for carbon neutrality. We also propose a framework for the most advanced naturally available carbon neutral accounting sources capable of being implemented on a large scale. Forming relevant data and procedures will help the "carbon neutrality" plan decision-making process. The formation of pertinent data and methodologies will give robust database support to the decision-making process for the "carbon neutrality" plan for the globe. In conclusion, this article offers some opinions, opportunities, challenges and future perspectives related to carbon neutrality and carbon emission monitoring and eliminating resources and technologies.

Dissociation characteristics and anthropogenic emissions from the combustion of double gas hydrates

Gas hydrates are an alternative and environmentally friendly energy source increasingly in the focus of scientific attention. The physicochemical processes behind gas hydrate combustion are studied experimentally and numerically with a view to improving the combustion efficiency and reducing gas emissions. It is important to estimate the pollutant emission concentrations in the context of combustion conditions. The research deals with the dissociation and combustion behavior of double gas hydrates in a tubular muffle furnace. Gas hydrates of different composition are considered: methane, methane-ethane, methane-propane and methane-isopropanol. Double gas hydrates are characterized by more stable combustion compared to methane hydrate. It is also shown that the double gas hydrate dissociation rate increases by 15-30% with increasing temperature. Dissociation and combustion processes were also modeled as part of the research, accounting for phase transitions in a gas hydrate layer. According to the simulation results, the total dissociation rate of gas hydrate increases by 3 times with an about 2.5-times increase in the powder layer thickness. Our experiments also focused on the impact of furnace temperature and gas hydrate composition on concentrations of anthropogenic gas emissions. We have found that the presence of heavy hydrocarbons such as ethane, propane and isopropanol in double gas hydrates reduce unburned CH₄ emissions by 60%. Also, an increase in the combustion efficiency of double gas hydrates, accompanied by a decrease in the concentrations of unburned CH₄ and CO, affects the yield of CO₂, which increased by 13-35%. When we increased the temperature in the furnace from 750 °C to 1050 °C, concentrations of nitrogen oxides and carbon dioxide increased by up to five times. Thus, the resulting correlations between the key parameters of these processes and a set of the main inputs illustrate the possibility to predict the optimal conditions for the combustion of gas hydrates.

Life cycle assessment of biodiesel production by using impregnated magnetic biochar derived from waste palm kernel shell

Biodiesel is renewable, biodegradable, biocompatible (non-toxic) and environmentally friendly, which emits less pollution than traditional fossil-based diesel, making it the most promising and ideal option. However, biodiesel is facing many current issues, mostly related to the utilisation of homogeneous catalytic technology, and this circumstance obstructs its potential development and advancement. Therefore, new pathways for biodiesel production need to be explored, and the aforementioned issues need to be addressed. Recently, a study was conducted on the impregnated magnetic biochar derived from a waste palm kernel shell (PKS) catalyst that can replace conventional catalysts due to its reusability property. Nevertheless, the environmental impacts of impregnated magnetic biochar derived from waste PKS catalyst for biodiesel production are yet to be studied. This study focuses on the evaluation of the life cycle assessment (LCA) of palm-based cooking oil for biodiesel production catalysed by impregnated magnetic biochar derived from waste PKS. Simapro was used in this study to evaluate the impact assessment methodologies. Case 1 (6.64 × 10² Pt) has contributed less to environmental impacts than Case 2 (1.83 × 10³ Pt). This indicates purchasing refined palm oil for biodiesel production may reduce environmental impacts by 64% compared to producing biodiesel from raw fruit bunches. In the midpoint assessment, the transesterification process was identified as the hotspot and marine aquatic ecotoxicity as the highest impact category with a value of 1.00 × 10⁶ kg 1,4-DB eq for 1 tonne of biodiesel produced. The endpoint results showed that Case 1 revealed the greatest impact on the transesterification process, with cumulative damage of 461 Pt. Scenario without processing the raw palm fruit bunches to obtained palm oil was better than Case 2. Further research should be conducted on life cycle cost and sensitivity analysis to evaluate the economic feasibility and promote sustainable biodiesel production.