Synthetic organic antibiotics residues as emerging contaminants waste-to-resources processing for a circular economy in China: Challenges and perspective

Effects of Bacillus coagulans on kidney injury caused by Klebsiella pneumoniae in rabbits

Klebsiella pneumoniae (KP) is a zoonotic conditionally pathogenic bacterium with a high prevalence of infection. It often induces purulent inflammation of the rabbit lungs, kidneys and other tissues, with high morbidity and mortality. Bacillus coagulans (BC) has the ability to regulate the balance of host intestinal flora and improve host immunity. However, the mechanism of the protective effect of BC on KP-induced kidney injury in rabbits is not clear. To explore this, we randomly divided fifty 35-day-old Eyplus rabbits into five groups: control, KP, low-dose BC (LBC), medium-dose BC (MBC) and high-dose BC (HBC). On the 1st day of the experiment, rabbits in LBC, MBC and HBC groups were fed diets containing 1 × 106 CFU/g, 5 × 106 CFU/g and 1 × 107 CFU/g BC, respectively, and rabbits in CK and KP groups were fed basal diets. On the 8th day, each rabbit in the KP, LBC, MBC and HBC groups was infused with 4 mL of 1 × 1011 CFU/mL KP bacterial solution, and the CK group was infused with the same amount of sterilised saline for a total of 7 days. Rabbit kidney tissues were collected on the 15th d. HE staining was used to observe the pathological changes of rabbit kidney tissues, oxidative stress-related indexes were detected by biochemical kits, and the content of inflammatory factors and apoptosis-related factors in kidney tissues were detected by ELISA. The results showed that KP disrupts the normal structure of the kidney, induces oxidative stress and inflammatory responses, and mediates apoptosis by regulating the levels of Bcl-2 family proteins. BC pretreatment significantly reduced kidney structural damage, oxidative stress, inflammatory response, and apoptosis in rabbits. To alleviate KP-induced kidney injury by increasing the activity of antioxidant enzymes and the content of anti-apoptotic proteins. Compared with the LBC group and the HBC group, the remission effect was more pronounced in the MBC group. Therefore, in this study, the effect of 5 × 106 CFU/g BC was more significant.

Rapid Quantification of Oxytetracycline Based on Fluorescence Enhancement Influenced by pH

Accurate quantification of antibiotics in environmental samples is typically challenging due to the low antibiotic concentrations and the complexity of environmental matrices. This paper presents a fluorescence spectrometry method for determining oxytetracycline under alkaline conditions. The ionic distribution of the oxytetracycline solution was analyzed based on its dissociation constant. The dimethylamino group plays a crucial role in this method, as it promotes intramolecular charge transfer in the electronic excited state through its electron-donating capability with a lone electron pair. The presented method is straightforward, cost-effective, and holds potential for analyzing oxytetracycline in water sample after further investigation.

Contamination status, source analysis and exposure assessments of quinolone antibiotics in the south of Yancheng Coastal Wetland, China

Yancheng coastal wetland, the largest coastal wetland in the west coast of the Pacific Ocean and the margin of the Asian continent, has significant environmental, economic and social effects on local human beings. The extensive contamination and potential risk of quinolone antibiotics (QNs) on local aquaculture and human health are still not clear until now. In this study, 52 surface sediment samples were collected to investigate the contamination status and polluted sources, and evaluate ecological risks of QNs in the south of Yancheng coastal wetland. The total contents of QNs ranged from 0.33 to 21.60 ng/g dw (mean value of 4.51 ng/g dw), following the detection frequencies of QNs ranging from 19.23 to 94.23%. The highest content of QNs occurred around an aquaculture pond dominated by flumequine. The total organic carbon contents of sediment were positively correlated with sarafloxacin and lomefloxacin (p < 0.05), indicating the enhanced absorption of these QNs onto sediments. Partial QNs, such as lomefloxacin, enrofloxacin, sarafloxacin and flumequine, presented the homology features originating from the emission of medical treatment and aquaculture. There was no potential risk of QNs to human beings but a potential risk to aquatic organisms (algae > plant > invertebrate). Totally, the management and protection of Yancheng coastal wetland should be of concern with aquaculture as the important industry.

Tricks and tracks of prevalence, occurrences, treatment technologies, and challenges of mixtures of emerging contaminants in the environment: With special emphasis on microplastic

This paper aims to emphasize the occurrence of various emerging contaminant (EC) mixtures in natural ecosystems and highlights the primary concern arising from the unregulated release into soil and water, along with their impacts on human health. Emerging contaminant mixtures, including pharmaceuticals, personal care products, dioxins, polychlorinated biphenyls, pesticides, antibiotics, biocides, surfactants, phthalates, enteric viruses, and microplastics (MPs), are considered toxic contaminants with grave implications. MPs play a crucial role in transporting pollutants to aquatic and terrestrial ecosystems as they interact with the various components of the soil and water environments. This review summarizes that major emerging contaminants (ECs), like trimethoprim, diclofenac, sulfamethoxazole, and 17α-Ethinylestradiol, pose serious threats to public health and contribute to antimicrobial resistance. In addressing human health concerns and remediation techniques, this review critically evaluates conventional methods for removing ECs from complex matrices. The diverse physiochemical properties of surrounding environments facilitate the partitioning of ECs into sediments and other organic phases, resulting in carcinogenic, teratogenic, and estrogenic effects through active catalytic interactions and mechanisms mediated by aryl hydrocarbon receptors. The proactive toxicity of ECs mixture complexation and, in part, the yet-to-be-identified environmental mixtures of ECs represent a blind spot in current literature, necessitating conceptual frameworks for assessing the toxicity and risks with individual components and mixtures. Lastly, this review concludes with an in-depth exploration of future scopes, knowledge gaps, and challenges, emphasizing the need for a concerted effort in managing ECs and other organic pollutants.

Microbial Degradation of Tetracycline Antibiotics: Mechanisms and Environmental Implications

The escalating global consumption of tetracyclines (TCs) as broad-spectrum antibiotics necessitates innovative approaches to mitigate their pervasive environmental persistence and associated risks. While initiatives such as China's antimicrobial reduction efforts highlight the urgency of responsible TC usage, the need for efficient degradation methods remains paramount. Microbial degradation emerges as a promising solution, offering novel insights into degradation pathways and mechanisms. Despite challenges, including the optimization of microbial activity conditions and the risk of antibiotic resistance development, microbial degradation showcases significant innovation in its cost-effectiveness, environmental friendliness, and simplicity of implementation compared to traditional degradation methods. While the published reviews have summarized some aspects of biodegradation of TCs, a systematic and comprehensive summary of all the TC biodegradation pathways, reactions, intermediates, and final products including ring-opening products involved with enzymes and mechanisms of each bacterium and fungus reported is necessary. This review aims to fill the current gap in the literature by offering a thorough and systematic overview of the structure, bioactivity mechanism, detection methods, microbial degradation pathways, and molecular mechanisms of all tetracycline antibiotics in various microorganisms. It comprehensively collects and analyzes data on the microbial degradation pathways, including bacteria and fungi, intermediate and final products, ring-opening products, product toxicity, and the degradation mechanisms for all tetracyclines. Additionally, it points out future directions for the discovery of degradation-related genes/enzymes and microbial resources that can effectively degrade tetracyclines. This review is expected to contribute to advancing knowledge in this field and promoting the development of sustainable remediation strategies for contaminated environments.

A biosensor based on graphene oxide nanocomposite for determination of carcinoembryonic antigen in colorectal cancer biomarker

Colorectal cancer is still a major global health concern, and early detection and accurate biomarker analyses are critical to its successful management. This paper describes the design and testing of a new biosensor based on a graphene oxide (GO) nanocomposite for the exact measurement of carcinoembryonic antigen (CEA), a well-known biomarker for colorectal cancer. The current study attempted to create a highly sensitive immunosensor for sensitive measurement of CEA based on a polypropylene-imine-dendrimer (PPI) and GO nanocomposite on GCE (PPI/GO/GCE). The PPI/GO nanocomposite served as an appropriate biocompatible nanostructure with a large surface area for immobilizing carcinoembryonic antigen (anti-CEA) and bovine serum albumin (BSA) molecules (BSA/anti-CEA/PPI/GO/GCE), thereby promoting the selectivity of electrochemical immunosensors, according to structural and electrochemical studies. Results showed that the BSA/anti-CEA/PPI/GO/GCE as a selective, sensitive, and stable immunosensor revealed a wide linear response from 0.001 to 2000 ng/mL, and a limit of detection of 0.3 pg/mL, which indicated comparable or better performance towards the CEA immunosensors in recent reports in the literature. This was due to the synergetic effect of the GO nanosheets and PPI with porous structure and more conductivity. Analytical results showed values of RSD (4.49%-5.04%) and recovery (90.00%-99.98%) are suitable for effective and accurate practical assessments in CEA in clinical samples. The capacity of the BSA/anti-CEA/PPI/GO/GCE to determine CEA in human blood was studied.

Degradation of amoxicillin applying photo-Fenton and acid hydrolysis processes with toxicity evaluation via antimicrobial susceptibility tests

ABSTARCTThe antibiotic amoxicillin (AMX) is a semisynthetic aminopenicillin, classified as an β-lactam antibiotic. This work aims to evaluate the AMX degradation (190 mg L-1), in aqueous medium, applying photo-Fenton ([TOC]0 = 100 mgC L-1; FH2O2 = 3.27 mmol min-1; [Fe2+] = 0.27 mmol L-1; pH = 3.0; T = 40°C) and acid hydrolysis processes. Along the experiments, samples were withdrawn and analyzed by a total organic carbon (TOC) analyzer and a liquid chromatography system coupled to diode array (HPLC-DAD) and mass spectrometry (HPLC-MS) detectors. The hydrolysis process proved to be less efficient, because AMX removals greater than 80% were observed only after 24 hours of reaction (pH 2). Conversely, the photo-Fenton process removed completely AMX in just 20 minutes, reaching 85% of TOC removal in 2 hours. Finally, the AMX aqueous solutions treated by the studied processes was also evaluated in respect of its toxicity to some microorganisms, applying two antimicrobial susceptibility tests: disk-diffusion and broth microdilution methods. It was observed that the AMX aqueous solutions, pretreated by the photo-Fenton process, for just 7.5 min of reaction time, did not inhibit the microorganisms growth. The obtained results show that the photo-Fenton process was able to degrade AMX, in a relatively short time, and that the generated degradation products did not inhibit the microorganisms growth, when compared to acid hydrolysis process. Thus, it was verified the potential application of the photo-Fenton system as a pretreatment step to conventional biological oxidation processes for the treatment of industrial wastewaters.

In situ synthesis of multivariant zeolitic tetrazolate imidazole frameworks (ZTIFs) with uncoordinated N-heteroatom sites for efficient adsorption of antiviral drugs

The current outbreak of the coronavirus (COVID-19) pandemic has significantly increased the global usage of antiviral drugs (AVDs), leading to higher concentrations of antibiotics in water pollution. To address this current issue, a new kind of adsorbent named isostructural zeolitic tetrazolate imidazolate frameworks (ZTIFs) were synthesized by combining imidazole and tetrazolates into one self-assembly approach by adjusting pores and stability of frameworks. The incorporation of imidazole ligand progressively increased the stability of frameworks. Furthermore, increasing the content of tetrazolate ligand greatly improved the adsorption performance due to N-rich sites by increasing the pore size. The obtained adsorbent composite exhibits macroporous structure up to 53.05 nm with excellent structural stability. Owing to their macropores and highly exposed active sites, the synthesized ZTIFs exhibit the maximum adsorption capacity for oseltamivir (OT) and ritonavir (RT) of 585.2 mg/g and 435.8 mg/g, respectively. Moreover, the adsorption uptake and saturation process were rapid compared to simple MOF. Within 20 min, both pollutants achieved equilibrium. The adsorption isotherms were best interpreted by Pseudo second order kinetics. The adsorption of AVDs on ZTIFs was spontaneous, exothermic, and thermodynamically feasible. The DFT calculations and characterization results after adsorption demonstrate that π-π interaction, pore filling, surface complexation, and electrostatic interaction were the primary features of the adsorption mechanism. The prepared ZTIFs composite exhibits high chemical, mechanical and thermal stability and can be recycled multiple times without destroying its morphology and structure. The adsorbent regeneration for several cycles impacted the operational cost and the eco-friendly characteristic of the process.

New trajectories of technologies for the removal of pollutants and emerging contaminants in the environment

Modern society has increasingly a diffusion of pollutants and emerging contaminants (e.g., different types of chemicals and endocrine disruptors in pharmaceuticals, pesticides, household cleaning, and personal care products, etc.) that have detrimental effects on the environment (atmosphere, hydrosphere, biosphere and anthroposphere) and also generate diseases and disorders on the people health. Environmental science requires efforts in the detection and elimination of manifold pollutants and emerging pollutants with appropriate product and process technologies. This study aims to analyze different paths of treatment technologies to investigate their evolution and predict new directions of promising technological trajectories to support the removal of contaminants directed to reach, whenever possible, sustainable development objectives. The work is mainly devoted to wastewater treatment technologies. A proposed model analyzes the evolution of patents (proxy of innovation and new technology) on publications (proxy of science and knowledge advances) to quantify the relative growth rate of new trajectories of technologies to remove pollutants and emerging contaminants. Results reveal that new directions of treatment technologies having an accelerated rate of growth are (in decreasing order): biochar and reverse osmosis in physical-based technologies, coagulation, and disinfection water treatments in chemical-based technologies and anaerobic processes in biological-based technologies. Other main technologies, such as carbon nanotubes and advanced oxidation processes, seem to be in the initial phase of development and need learning by using processes and further science and technology advances to be implemented as effective treatments and cost-effective. The results here are in accord with global water and wastewater equipment treatment market revenues by technology, showing a similar trend. These findings bring us to the main information to extend the knowledge about new directions of technologies for the treatment and/or elimination of pollutants and microorganisms that can support decisions of policymakers towards goals of sustainable development by reducing environmental degradation and people health disorders.

Commercialization potential of agro-based polyhydroxyalkanoates biorefinery: A technical perspective on advances and critical barriers

The exponential increase in the use and careless discard of synthetic plastics has created an alarming concern over the environmental health due to the detrimental effects of petroleum based synthetic polymeric compounds. Piling up of these plastic commodities on various ecological niches and entry of their fragmented parts into soil and water has clearly affected the quality of these ecosystems in the past few decades. Among the many constructive strategies developed to tackle this global issue, use of biopolymers like polyhydroxyalkanoates as sustainable alternatives for synthetic plastics has gained momentum. Despite their excellent material properties and significant biodegradability, polyhydroxyalkanoates still fails to compete with their synthetic counterparts majorly due to the high cost associated with their production and purification thereby limiting their commercialization. Usage of renewable feedstocks as substrates for polyhydroxyalkanoates production has been the thrust area of research to attain the sustainability tag. This review work attempts to provide insights about the recent developments in the production of polyhydroxyalkanoates using renewable feedstock along with various pretreatment methods used for substrate preparation for polyhydroxyalkanoates production. Further, the application of blends based on polyhydroxyalkanoates, and the challenges associated with the waste valorization based polyhydroxyalkanoates production strategy is elaborated in this review work.

Hormesis-tempting stressors driven by evolutionary factors for mitigating negative impacts instigated over extended exposure to chemical elements

The adaptive responses to moderate environmental challenges by the biological systems have usually been credited to hormesis. Since the hormetic biphasic dose-response illustrates a prominent pattern towards biological responsiveness, the studies concerning such aspects will get much more significance in risk assessment practices and toxicological evaluation research. From this point of view, the past few epochs have witnessed the extending recognition of the notion concerning hormesis. The extraction of its basic foundations of evolutionary perspectives-along with the probable underlying molecular and cellular mechanisms followed by the practical implications to enhance the quality of life. To get better and more effective output in this regard, the present article has evaluated the various observations of previous investigations. The intent of integrating the novel inferences concerning the hormesis-tempting stressors driven by predominant evolutionary factors for mitigating the adverse impacts that were prompted over frequent and continuous exposure to the various chemical elements. Such inferences can offer extensive insight into the implications concerning the risk assessment of hormesis.

Extrinsic Point Defects in TiO2-Acetylacetone Charge-Transfer Complex and Their Effects on Optical and Photochemical Properties

TiO₂-based visible-light-sensitive nanomaterials are widely studied for photocatalytic applications under UV-Vis radiation. Among the mechanisms of visible-light sensitization, extrinsic oxygen vacancies have been introduced into TiO₂ and charge-transfer complexes (CTCs) have been formed between chelating ligands, such as acetylacetone, and nanocrystalline TiO₂ (TiO₂-ACAC). However, the influence of extrinsic oxygen vacancies on the photocatalytic performance of TiO₂-based CTCs is unknown. In this work, surface/bulk extrinsic oxygen vacancies were introduced into TiO₂-ACAC through calcination at 270 °C under static air, argon, and hydrogen atmospheres. TiO₂-ACAC CTCs were characterized by X-ray powder diffraction, thermogravimetric analysis, diffuse-reflectance spectroscopy, photoluminescence, electron paramagnetic resonance (EPR), and X-ray photoelectron spectroscopy techniques. The correlation between EPR-spin trapping and tetracycline (TC) photodegradation, using scavengers, highlighted the key role of the superoxide radical in TC degradation by TiO₂-ACAC CTCs under low-power visible-light radiation. The increased extrinsic oxygen vacancies concentration was not beneficial for the photocatalytic performance of TiO₂ CTCs, since bulk extrinsic oxygen vacancies additionally act as recombination centers. In fact, the TiO₂-ACAC CTC with the lowest extrinsic oxygen vacancies concentration exhibited the highest photocatalytic performance for TC degradation due to an adequate distribution of extrinsic bulk oxygen vacancies, which led to the trapped electrons undergoing repeated hopping, reducing the recombination rates and improving the efficiency in superoxide radicals production. Our findings indicated that TiO₂-ACAC CTCs are able to degrade pollutants via interactions with electronic holes and principally superoxide radicals and also, provided fundamental information about the influence of surface/bulk extrinsic oxygen vacancies on the photocatalytic performance, lattice parameters, and optical and photochemical properties of TiO₂-based CTCs.

Ultrafast synthesis of laccase-copper phosphate hybrid nanoflowers for efficient degradation of tetracycline antibiotics

The presence of antibiotics in the environment causes increasing attention due to their potential risks to ecosystems and public health. Laccases are versatile oxidases capable of degrading various organic contaminants including pharmaceuticals. However, the performance of bacterial laccases on tetracycline antibiotics (TCs) degradation is seldom investigated. In this work, a bacterial laccase from Bacillus amyloliquefaciens was immobilized as laccase-inorganic hybrid nanoflowers (Lac-hNFs) by a facile and rapid method. The immobilized laccase was employed to remove different TCs including tigecycline, which is a third-generation TC that its degradation by laccase has not been reported. Lac-hNFs were synthesized by sonication-mediated self-assembly of laccase and copper ions in 5 min at room temperature. About 95% of laccase could be encapsulated in the nanoflowers, and the obtained Lac-hNFs exhibited great enhancement in stability under harsh conditions. The immobilized laccase showed a half-life of 11.7 h at 60 °C, which was about 1.4-fold higher than that of the free enzyme. Meanwhile, Lac-hNFs retained 81% of the initial activity after incubation at 25 °C for 10 days. The laccase in combination with acetosyringone could efficiently decompose tetracycline, doxycycline, and tigecycline. More than 79% of the three TCs were transformed in 1 h. Compared with the free enzyme, Lac-hNFs demonstrated higher capacity in the removal of TCs. Furthermore, Lac-hNFs remained their high degradation capacity after five cycles of reuse. Bacterial growth inhibition test revealed that most of the toxicity of TCs was eliminated after Lac-hNFs treatment. The main transformation products were identified by LC-MS, and the possible degradation pathways were proposed. The interaction mechanism between laccase and TCs was also analyzed using molecular docking. This work provides an efficient way to remove toxic organic pollutants.

Biogenic synthesis of reduced graphene oxide decorated with silver nanoparticles (rGO/Ag NPs) using table olive (olea europaea) for efficient and rapid catalytic reduction of organic pollutants

In this work, graphene oxide (GO) sheets were prepared via a facile electrochemical exfoliation of graphite in acidic medium and subsequent oxidation with potassium permanganate. The GO sheets were employed for preparation of reduced GO adorned with nanosized silver (rGO/Ag NPs) using green reduction of GO and Ag(I) via olive fruit extract as a reducing and immobilizing agent. The crystal phase, morphology, and nanostructure of the prepared catalyst were characterized by XRD, SEM, EDX, UV-Vis and Raman spectroscopy techniques. The as-prepared rGO/Ag NPs showed superior catalytic performance towards the complete reduction (up to 99%) of 4-nitrophenol (4-NPH) to 4-aminophenol (4-APH) and rhodamine B (RhB) to Leuco RhB within 180 s using NaBH₄ at ambient condition. The rate constant (k) values were found to be 0.021 and 0.022 s^-1 for 4-NPH and RhB reduction, respectively. In addition, the regenerated catalyst could be reused after seven cycles without losing any apparent catalytic efficiency. Accounting for the excellent catalytic capability, chemical stability and environment-friendly synthesis protocol, the rGO/Ag NPs has great potential working as a heterogeneous catalyst in the transforming harmful organic contaminants into less harmful or harmless compounds.

Exploring the impact of biochar supplement on the dynamics of antibiotic resistant fungi during pig manure composting

The purpose of this study was to investigate antibiotic resistant fungal (ARF) communities in pig manure (PM) composting employing two different biochar (coconut shell-CSB and bamboo biochar-BB) as amendment. Three treatments (Control, 10% CSB and 10% BB) were designed and indicated with T1 to T3. Experimental results declared that the fungal abundance significantly reduced among the both biochar applied treatments but three dominant phyla Ascomycota, Basidiomycota and Mucoromycota were still relatively greater abundance present. There were significant differences (p < 0.05) in the relative abundance and diversity of fungi among all three treatments. Interestingly, biochar addition regulated the overall fungal community in final compost. Compared with the control group, the abundance of fungi was positively mobilized, and especially CSB showed a better effect. Conclusively, biochar has potential to inhibit and reduce the ARGs population and mobility in compost. Thus, these findings offer new insight to understand the succession of ARFs during PM composting.

Pharmaceuticals and Personal Care Products in the Environment with Emphasis on Horizontal Transfer of Antibiotic Resistance Genes

Pharmaceuticals and personal care products (PPCPs) discharged into environment has several adverse impacts. PPCPs are widely utilised for veterinary as well as cosmetic and personal health reasons. These are members of the expanding class of substances known as Contaminants of Emerging Concern (CECs). Antibiotic resistance in the environment and garbage generated by PPCP endanger life. The World Health Organisation (WHO) now recognises antibiotic resistance as a significant global health problem due to the expected increase in mortality caused by it. In the past ten years, mounting data has led experts to believe that the environment has a significant impact on the development of resistance. For human diseases, the external environment serves as a source of resistance genes. It also serves as a major pathway for the spread of resistant bacteria among various habitats and human populations. Large-scale DNA sequencing methods are employed in this thesis to better comprehend the dangers posed by environmental antibiotic resistance. The quantification of the number is an important step in this process. Metagenomic measurement of the number of antibiotic resistance genes in various contexts is a crucial step in this process. However, it’s also crucial to put this data into a broader context by integrating things like taxonomic information, antibiotic concentrations, and the genomic locations of found resistance genes.

Advances in bioremediation of emerging contaminants from industrial wastewater by oxidoreductase enzymes

The bioremediation of emerging recalcitrant pollutants in wastewater via enzyme biotechnology has been evolving as cost-effective with an input of low-energy technological approach. However, the enzyme based bioremediation technology is still not fully developed at a commercial level. The oxidoreductases being the domineering biocatalysts are promising candidates for wastewater treatments. Henceforth, comprehending their global market and biotransformation efficacy is mandatory for establishing these techno-economic bio-enzymes in commercial scale. The biocatalytic strategy can be established as a combinatorial approach with existing treatment technology to achieve towering bioremediation and effective removal of emerging pollutants from wastewater. This review provides a novel insight on the toxicological xenobiotics released from industries such as paper and pulps, soap and detergents, pharmaceuticals, textiles, pesticides, explosives and aptitude of peroxidases, nitroreductase and cellobiose dehydrogenase in their bio-based treatment. Moreover, the review comprehensively covers environmental relevance of wastewater pollution and the critical challenges based on remediation achieved through biocatalysts for future prospectives.

A comprehensive review on recent advancements in biodegradation and sustainable management of biopolymers

Recent years have seen upsurge in plastic manufacturing and its utilization in various fields, such as, packaging, household goods, medical applications, and beauty products. Due to various adverse impacts imposed by synthetic plastics on the health of living well-being and the environment, the biopolymers have been emerged out an alternative. Although, the biopolymers such as polyhydroxyalkanoates (PHA) are entirely degradable. However, the other polymers, such as poly (lactic acid) (PLA) are only partially degradable and often not biosynthesized. Biodegradation of the polymers using microorganisms is considered an effective bioremediation approach. Biodegradation can be performed in aerobic and anaerobic environments. In this context, the present review discusses the biopolymer production, their persistence in the environment, aerobic biodegradation, anaerobic biodegradation, challenges associated with biodegradation and future perspectives. In addition, this review discusses the advancement in the technologies associated with biopolymer production, biodegradation, and their biodegradation standard in different environmental settings. Furthermore, differences in the degradation condition in the laboratory as well as on-site are discussed.

Biodegradation of chlortetracycline by Bacillus cereus LZ01: Performance, degradative pathway and possible genes involved

Microbial degradation of chlortetracycline (CTC) is an effective bioremediation method. In the present study, an enrichment technique was used to isolate a Bacillus cereus LZ01 strain capable of effectively degrading CTC from cattle manure. Response surface methodology was used to identify optimized conditions under which strain LZ01 was able to achieve maximal CTC removal (83.58%): temperature of 35.77 °C, solution pH of 7.59, CTC concentration of 57.72 mg/L and microbial inoculum of 0.98%. The antibacterial effect of CTC degradation products on Escherichia coli was investigated by the disk diffusion test, revealing that the products by LZ01 degradation of CTC exhibited lower toxicity than parent compound. Shake flask batch experiments showed that the biodegradation of CTC was a synergistic effect of intracellular and extracellular enzymes, and intracellular enzyme had a better degradation effect on CTC (77.56%). Whole genome sequencing revealed that genes associated with ring-opening hydrolysis, demethylation, deamination and dehydrogenation in strain LZ01 may be involved in the biodegradation of CTC. Subsequent seven possible biodegradation products were identified by LC-MS analyses, and the biodegradation pathways were proposed. Overall, this study provides a theoretical foundation for the characterization and mechanism of CTC degradation in the environment by Bacillus cereus LZ01.