Polyethylene glycol functionalized reduced graphene oxide coupled with zinc oxide composite adsorbent for removal of phenolic wastewater

Polyethylene glycol crosslinked modified chitosan/halloysite nanotube composite aerogel microspheres for efficient adsorption of melanoidin

Melanoidins are widely present in molasses wastewater and are dark-colored macromolecules that are hazardous to the environment. Currently, adsorption methods can effectively remove melanoidins from wastewater. However, existing adsorbents have shown unsatisfactory removal efficiency for melanoidins, making practical application challenging. Polyethylene glycol crosslinked modified chitosan/halloysite nanotube composite aerogel microspheres (PCAM@HNTs) were developed as a highly efficient adsorbent for melanoidins. The removal rate of PCAM@HNTs for melanoidins was 98.53 % at adsorbent dosage 0.4 mg/mL, pH 7, temperature 303 K and 450 mg/L initial melanoidins concentration, and the corresponding equilibrium adsorption capacity was 1108.49 mg/g. The analysis results indicate that the adsorption of melanoidins by PCAM@HNTs is a spontaneous and endothermic process. It fits well with pseudo-second-order kinetic models and the Freundlich isotherm equation. The adsorption of PCAM@HNT on melanoidins is primarily attributed to electrostatic and hydrogen bonding interactions. Furthermore, PCAM@HNTs exhibit excellent biocompatibility and are nonhazardous. Therefore, PCAM@HNTs proved to be an ideal adsorbent for the decolorization of molasses wastewater.

Adsorption of contaminants by nanomaterials synthesized by green and conventional routes: a critical review

Nanomaterials, due to their large surface area and selectivity, have stood out as an alternative for the adsorption of contaminants from water and effluents. Synthesized from green or traditional protocols, the main advantages and disadvantages of green nanomaterials are the elimination of the use of toxic chemicals and difficulty of reproducing the preparation of nanomaterials, respectively, while traditional nanomaterials have the main advantage of being able to prepare nanomaterials with well-defined morphological properties and the disadvantage of using potentially toxic chemicals. Thus, based on the particularities of green and conventional nanomaterials, this review aims to fill a gap in the literature on the comparison of the synthesis, morphology, and application of these nanomaterials in the adsorption of contaminants in water. Focusing on the adsorption of heavy metals, pesticides, pharmaceuticals, dyes, polyaromatic hydrocarbons, and phenol derivatives in water, for the first time, a review article explored and compared how chemical and morphological changes in nanoadsorbents synthesized by green and conventional protocols affect performance in the adsorption of contaminants in water. Despite advances in the area, there is still a lack of review articles on the topic.

Polyethylene glycol embedded reduced graphene oxide supramolecular assemblies for enhanced room-temperature gas sensors

Herein, we present the gas-dependent electrical properties of a reduced graphene oxide nanocomposite. The reduced graphene oxide (rGO) was synthesized by reducing GO with sodium borohydride (NaBH4). As-synthesized rGO was dispersed in DI water containing 1, 2, 3, 4, and 5 wt% polyethylene glycol (PEG) to prepare PEG-rGO supramolecular assemblies. The successful preparation of supramolecular assemblies was verified by their characterization using XRD, FESEM, EDS, TEM, FTIR, and Raman spectroscopy. At room temperature, the gas-dependent electrical properties of these supramolecular assemblies were investigated. The results showed that sensors composed of PEG-rGO supramolecular assemblies performed better against benzene and methanol at 3% and 4% PEG, respectively. However, high selectivity and a wide range of activation energies (∼1.64-1.91 eV) were observed for H2 gas for 4% PEG-modified supramolecular assemblies. The PEG-rGO supramolecular assemblies may be an excellent candidate for constructing ultrahigh-performance gas sensors for a variety of applications due to their high sensitivity and selectivity.

Graphene-based materials for effective adsorption of organic and inorganic pollutants: A critical and comprehensive review

Water scarcity has been felt in many countries and will become a critical issue in the coming years. The release of toxic organic and inorganic contaminants from different anthropogenic activities, like mining, agriculture, industries, and domestic households, enters the natural waterbody and pollutes them. Keeping this in view in combating the environmental crises, removing pollutants from wastewater is one of the ongoing environmental challenges. Adsorption technology is an economical, fast, and efficient physicochemical method for removing both organic and inorganic pollutants, even at low concentrations. In the last decade, graphene and its composite materials have become the center of attraction for numerous applications, including wastewater treatment, due to the large surface area, highly active surface, and exclusive physicochemical properties, which make them potential adsorbents with unique physicochemical properties, like low density, chemical strength, structural variability, and the possibility of large-scale fabrications. This review article provides a thorough summary/critical appraisal of the published literature on graphene-, GO-, and rGO-based adsorbents for the removal of organic and inorganic pollutants from wastewater. The synthesis methods, experimental parameters, adsorption behaviors, isotherms, kinetics, thermodynamics, mechanisms, and the performance of the regeneration-desorption processes of these substances are scrutinized. Finally, the research challenges, limitations, and future research studies are also discussed. Certainly, this review article will benefit the research community by getting substantial information on suitable techniques for synthesizing such adsorbents and utilizing them in water treatment and designing water treatment systems.

Synthesis of graphene oxide-modified porous chitosan cross-linked polyaniline composite for static and dynamic removal of Cr(VI)

A novel ternary composite was synthesized comprising graphene oxide-modified porous chitosan cross-linked polyaniline (GO@CS-PANI) by improved Hummers method, followed by cross-linking and grafting. The morphological, structural, and electrical properties of the composite were characterized by FESEM, BET, XRD, RAMAN, FTIR spectra, and zeta potential. It was found that the composite shows excellent Cr(VI) removal performance both in static and dynamic adsorption. The optimal adsorption parameters were solution at pH of 2.0, adsorbent dosage of 0.4 g/L, time of 45 min, and temperature of 35 °C. The Langmuir isotherm model was the best-fitted model, indicating homogeneous adsorption with maximum uptake of 539.83 mg/g. Pseudo-second-order was the best-fitted kinetic model, and the rate was controlled by film diffusion. Thermodynamic data demonstrated that the process was spontaneous, endothermic, and feasible. From the dynamic study, it was witnessed that a lower flow rate and a higher bed height were suitable for maximum adsorption performance. The Thomas model was the best-fitted model for data obtained from the dynamic study. Competition from interfering ions showed that anions have little effect on Cr(VI) removal, whereas cations have no such effect. The adsorption mechanism involved electrostatic attraction, π-π interaction, ion exchange, and metal ion complexion. After five cycles of adsorption-desorption study, the composite still removed 76% Cr(VI). These findings of the present study and the reusable nature of GO@CS-PANI composite signify the innovative and excellent adsorbent for wastewater treatment.