Green synthesized cobalt oxide nanoparticles with photocatalytic activity towards dye removal

Magnetic and visible light-induced novel green synthesized magnetic Co3O4 photocatalysts via sunflower seed meal extract for anionic and cationic dye removal by adsorption assisted photocatalytic degradation

This study was aimed at the preparation of m-Co3O4 NPs (magnetic Co3O4 nanoparticles) from sunflower seed meal (SFSM) which is the waste of sunflower seed oil factories, and their application as a photocatalyst for the adsorption assistant photocatalysis degradation of methylene blue (MB), and direct yellow-50 (DY-50) under the visible irradiations. Also, the photocatalytic performance of m-Co3O4 NPs was evaluated in synthetic wastewater. The produced m-Co3O4 NPs were ferromagnetic with a saturation magnetization value of 4.3 emu g-1 and the degradation of cationic MB and anionic DY-50 dyes by 100% and 93% in 20 min and 35 min, respectively, by adsorption-assisted photocatalytic process under visible light was achieved. The reactions were found to be pseudo-second-order equation for the adsorption-assisted photocatalytic process for both dyes. The photocatalytic activity of m-Co3O4 NPs decreased slightly even after five repeated cycles. These results show that the m-Co3O4 NPs can be used successfully in dye treatment in wastewater with their adsorption-assisted photocatalytic properties, activation by visible light, magnetic separability, and low-cost production.

From green chemistry to biomedicine: the sustainable symphony of cobalt oxide nanoparticles

Deciphering the importance of nanostructures in advanced technologies for a broad application spectrum has far-reaching implications for humans and the environment. Cost-effective, abundant cobalt oxide nanoparticles (NPs) are among the most attractive and extensively utilized materials in biomedical sciences due to their high chemical stability, and biocompatibility. However, the methods used to develop the NPs are hazardous for human health and the environment. This article precisely examines diverse green synthesis methods employing plant extracts and microbial sources, shedding light on their mechanism, and eco-friendly attributes with more emphasis on biocompatible properties accompanied by their challenges and avenues for further research. An in-depth analysis of the synthesized cobalt oxide NPs by various characterization techniques reveals their multifaceted functionalities including cytotoxicity, larvicidal, antileishmanial, hemolytic, anticoagulating, thrombolytic, anticancer and drug sensing abilities. This revelatory and visionary article helps researchers to contribute to advancing sustainable practices in nanomaterial synthesis and illustrates the potential of biogenically derived cobalt oxide NPs in fostering green and efficient technologies for biomedical applications.

Synergistically enhanced photocatalytic properties of Co3O4-G/GO nanocomposites: unravelling their interactions and charge-transfer dynamics using XAS

Metal oxide composites with graphene/graphene oxide have increasingly gained popularity in enhancing the photocatalytic degradation of several existing harmful dyes. Moreover, identifying the role of carbon networks and their interactions in composite formation would assist in the design and development of photocatalysts. In the present study, we investigated the role of carbon networks in improving photocatalytic properties. Electronic structure analysis of cobalt oxide-graphene (C2)/graphene oxide (C3) nanocomposites using XAS suggested possible charge transfer from cobalt oxide nanoparticles to the carbon network during composite formation. The photocatalytic degradation of C3 towards phenol dye (1 × 10-3 M) was >50% and improved the degradation rate with k = 0.231 h-1.In the quest to understand the mechanism unfolding on its surface, in situ XAS under UV-visible irradiation was performed, which shed light on delayed excitonic recombination in the synthesized nanocomposites. This enabled hydroxy radicals (˙OH) to play a preeminent role in the cleavage of the phenol ring and its intermediaries. Based on these observations, a detailed mechanism for charge transfer occurring during nanocomposite formation and the mechanism involved in the enhanced photocatalytic activity of the nanocomposite photocatalyst towards phenol degradation under the influence of UV-visible irradiation are discussed.

Green-synthesized CuO and ZnO nanoparticles derived from Calotropis gigantea (Apple of Sodom): enhancing plant growth, efficient dye removal, and potent antibacterial applications

Nanoparticles, owing to their unique physicochemical properties, have garnered significant attention in various scientific disciplines, including materials science, chemistry, biology, and environmental engineering. In recent years, the synthesis of metal oxide nanoparticles, such as NiO, Fe2O3, ZnO, SnO2, and CuO via green routes, has gained attraction due to their diverse applications in fields ranging from catalysis and electronics to medicine and environmental remediation. This study focuses on the green synthesis of copper oxide (CuO) and zinc oxide (ZnO) nanoparticles using Calotropis gigantea (Apple of Sodom) leaf extract as a reducing agent and stabilizer, with zinc nitrate (ZnNO3.6H2O) and copper nitrate (CuNO3.3H2O) as precursors. The hexagonal phase of ZnO and monoclinic plan structure of CuO with high crystallinity was confirmed by XRD and elemental composition by EDX analysis. With the help of an SEM image, particle size measured for CuO and ZnO using ImageJ software was found to be 56.08 nm and 46.49 nm, respectively. This study investigates the efficacy of nanoparticles in wastewater treatment, particularly focusing on methylene blue dye decolorization using the statistical processing of response surface methodology (RSM) using the Box-Behnken method. Additionally, it explores the impact of synthesized nanoparticles on seed growth enhancement, using Vigna radiata (green gram) seeds immersed in various doses of nanoparticles (0, 0.5, 1, 1.5, 2 mg/30 mL). Furthermore, the antibacterial activity of the nanoparticles against both gram-positive and gram-negative bacteria is evaluated. The results confirm the effectiveness of the materials for methylene blue dye removal, achieving 80.53% with CuO and 78.25% with ZnO. Significant seed growth was observed with a low nanoparticle dosage of 1.5 mg/30 mL, resulting in the highest seedling vigour index and germination percentage. This reduces the need for fertilizers and lessens environmental impact.

Efficient removal of environmental pollutants by green synthesized metal nanoparticles of Clitoriaternatea

Prevention and management of water pollution are becoming a great challenge in the present scenario. Different conventional methods like carbon adsorption, ion exchange, chemical precipitation, evaporation, and biological treatments remove water pollutants. Nowadays, the requirement for effective, non-toxic and safe waste management strategies is very high. Nanomaterials have been explored in various fields due to their unique characteristics. Green synthesis of nanomaterial is becoming more popular due to their safety, non-toxicity, and ease of scale-up technology. Metal nanoparticles can be synthesized using a green synthesis method using biological sources provided by eco-friendly, non-hazardous nanomaterials with superior properties to bulk metals. Hence, this study has designed a green synthesis of magnetic (cobalt oxide) and noble (gold) nanoparticles from the fresh flowers of Clitoria ternatea. The flavonoids and polyphenols in the extract decreased the energy band gap of cobalt oxide and gold nanoparticles; hence, the capping of the natural constituents in Clitoria ternatea helped form stable metal nanoparticles. The cobalt oxide and gold nanoparticles are evaluated for their potential for eliminating organic pollutants from industrial effluent. The novelty of this present work represents the application of cobalt oxide nanoparticles in the removal of organic pollutants and a comparative study of the catalytic behaviour of both metal nanoparticles. The degradation of bromophenol blue, bromocresol green, and 4-nitrophenol in the presence of gold nanoparticles was completed in 120, 45, and 20 min with rate constants of 3.7 × 10-3/min, 6.9 × 10-3/min, and 16.5 × 10-3/min, respectively. Similarly, the photocatalysis of bromophenol blue, bromocresol green, and 4-nitrophenol in the presence of cobalt oxide nanoparticles was achieved in 60, 90, and 40 min with rate constants of 2.3 × 10-3/min, 1.8 × 10-3/min, and 1.7 × 10-3/min, respectively. The coefficient of correlation (R2) values justify that the degradation of organic pollutants follows first-order kinetics. The significance of the study is to develop green nanomaterials that can be used efficiently to remove organic pollutants in wastewater using a cost-effective method with minimal toxicity to aquatic animals. It has proved to be useful in environmental pollution management.

Facile green synthesis of a novel NiO and its catalytic effect on methylene blue photocatalytic reduction and sodium borohydride hydrolysis

NiO nanoparticles were synthesized from pine cone extract by green synthesis method, which is a simple, cost-effective, environmentally friendly and sustainable method. The particle size of NiO nanoparticles was determined to be in the range of 10-25 nm by X-diffraction differential and transmission electron microscope analysis, and the bandgap energy of NiO nanoparticles was determined to be 2.66 eV. The catalytic effect of NiO nanoparticles in both microwave-assisted sodium borohydride hydrolysis and photocatalytic reduction of methylene blue was examined and it was determined that they had a high catalytic effect in both applications. It was determined that the hydrogen production rate in sodium borohydride hydrolysis was 1135 mL/g/min. The activation energy of sodium borohydride hydrolysis is 29.69 kJ/mol and 29.59 kJ/mol for the nth-order and Langmuir Hinshelwood kinetic models, respectively. In the photocatalytic reduction of methylene blue with NaBH4, it was determined that the reduction did not occur in the absence of a catalyst, but in the presence of the catalyst, the reduction occurred 98% in 3 min. It was determined that NiO nanoparticles were used five times in the photocatalytic reduction of methylene blue and the reduction efficiency for the fifth time was 93%. It was determined that the photocatalytic reduction of methylene blue was pseudo-first order and the rate constant was 1.63 s-1. It was determined that NiO nanoparticles synthesized by the environmentally friendly green synthesis method can be used as catalysts for two different applications.

Green synthesis of iron nanoparticles using mulberry leaf extract: characterization, identification of active biomolecules, and catalytic activity

The synthesis of iron-based nanoparticles (Fe NPs) using traditional preparation methods suffered from the disadvantages of high cost, environmental harm, and easy agglomeration. In this study, a novel eco-friendly method was proposed for the synthesis of iron nanomaterials (ML-Fe NPs): using antioxidant components extracted from mulberry leaf to reduce divalent iron (II). The preparation conditions of ML-Fe NPs were optimized by orthogonal tests. The prepared ML-Fe NPs exhibited an amorphous core-shell structure, displaying excellent dispersion and stability. During the synthesis process of ML-Fe NPs, the polyphenol molecules in mulberry leaf extract played a dominant role. A possible synthetic mechanism involving complexation, reduction, and encapsulation was proposed. Furthermore, the ML-Fe NPs were utilized to construct an ML-Fe NPs/peroxymonosulfate catalytic system for the degradation of Rhodamine B dye wastewater. The ML-Fe NPs demonstrated remarkable catalytic potential, achieving a 99% degradation efficiency for Rhodamine B within a span of 40 min.

Synergistic potential in spinel ferrite MFe2O4 (M = Co, Ni) nanoparticles-mediated graphene oxide: Structural aspects, photocatalytic, and kinetic studies

The existence of artificial dyes in water is a significant environmental concern, as it can lead to poor water quality. Photodegradation is becoming an increasingly popular method for treating water contaminated with dyes. In this study, the photodegradation of Reactive Red 66 and Reactive Red 120 dyes, as well as textile wastewater, was investigated under UV and visible light irradiation. To enhance the photoresponse of the MFe2O4 (M = Co, Ni) nanoparticles, modifications were made by incorporating graphene oxide. The MFe2O4 nanoparticles and MFe2O4/GO nanocomposite photocatalysts were subjected to several characterization techniques, including FT-IR, Raman spectroscopy, XRD, DRS, zeta potential, VSM, TGA, DSC, BET, SEM, and EDAX analysis. Experiments were conducted to optimize several key parameters involved in the photodegradation process, including pH, photocatalyst dosage, initial dye concentration, and irradiation time. The removal efficiency of Reactive Red 66 and Reactive Red 120 dyes using CoFe2O4 nanoparticles was found to be 86.97 and 82.63%, respectively. Also, the removal percentage of these dyes using CoFe2O4/GO nanocomposite photocatalyst was 95.57 and 90.9% for Reactive Red 66 and Reactive Red 120, respectively. Experiments found that NiFe2O4 nanoparticles removed 90.92% of Reactive Red 66 dye and 84.7% of Reactive Red 120 dye. The NiFe2O4/GO nanocomposite photocatalyst showed even higher removal efficiencies, degrading 97.96% of Reactive Red 66 and 93.44% of Reactive Red 120. After three days of exposure to visible light irradiation, the removal percentage of Reactive Red 66 using MFe2O4 and MFe2O4/GO nanocomposite was investigated.

Prevalence of Cobalt in the Environment and Its Role in Biological Processes

Cobalt (Co) is an essential trace element for humans and other animals, but high doses can be harmful to human health. It is present in some foods such as green vegetables, various spices, meat, milk products, seafood, and eggs, and in drinking water. Co is necessary for the metabolism of human beings and animals due to its key role in the formation of vitamin B12, also known as cobalamin, the biological reservoir of Co. In high concentrations, Co may cause some health issues such as vomiting, nausea, diarrhea, bleeding, low blood pressure, heart diseases, thyroid damage, hair loss, bone defects, and the inhibition of some enzyme activities. Conversely, Co deficiency can lead to anorexia, chronic swelling, and detrimental anemia. Co nanoparticles have different and various biomedical applications thanks to their antioxidant, antimicrobial, anticancer, and antidiabetic properties. In addition, Co and cobalt oxide nanoparticles can be used in lithium-ion batteries, as a catalyst, a carrier for targeted drug delivery, a gas sensor, an electronic thin film, and in energy storage. Accumulation of Co in agriculture and humans, due to natural and anthropogenic factors, represents a global problem affecting water quality and human and animal health. Besides the common chelating agents used for Co intoxication, phytoremediation is an interesting environmental technology for cleaning up soil contaminated with Co. The occurrence of Co in the environment is discussed and its involvement in biological processes is underlined. Toxicological aspects related to Co are also examined in this review.

Observation of inherited plasmonic properties of TiN in titanium oxynitride (TiOxNy) for solar-drive photocatalytic applications

This study demonstrates the synthesis of titanium oxynitride (TiOxNy) via a controlled step-annealing of commercial titanium nitride (TiN) powders under normal ambience. The structure of the formed TiOxNy system is confirmed via XRD, Rietveld refinements, XPS, Raman, and HRTEM analysis. A distinct plasmonic band corresponding to TiN is observed in the absorption spectrum of TiOxNy, indicating that the surface plasmonic resonance (SPR) property of TiN is being inherited in the resulting TiOxNy system. The prerequisites such as reduced band gap energy, suitable band edge positions, reduced recombination, and enhanced carrier-lifetime manifested by the TiOxNy system are investigated using Mott-Schottky, XPS, time-resolved and steady-state PL spectroscopy techniques. The obtained TiOxNy photocatalyst is found to degrade around 98% of 10 ppm rhodamine B dye in 120 min and produce H2 at a rate of ∼1546 μmolg-1h-1 under solar light irradiation along with consistent recycle abilities. The results of cyclic voltammetry, linear sweep voltammetry, electrochemical impedance and photocurrent studies suggest that this evolved TiOxNy system could be functioning via plasmonic Ohmic interface rather than the typical plasmonic Schottky interface due to their amalgamated band structures in the oxynitride phase.

Biosynthesizing Cassia fistula Extract-Mediated Silver Nanoparticles for MCF-7 Cell Lines Anti-Cancer Assay

The unique consequence of green synthesis is that the mediator plant is able to release chemicals that are efficacious as reducing as well as stabilizing agents. In this work, the fruit pulp and leaf essences of Cassia fistula have been used to manufacture silver nanoparticles through the green synthesis technique. The sculpturing of nanoparticles was accomplished by utilizing the reduction phenomenon that ensued due to the reaction between plant essences and the precursor solution. These biosynthesized silver nanoparticles were examined, where we used scanning electron microscopy, UV-vis spectroscopy, and X-ray diffraction techniques as means to analyze the structure, optical properties, and crystalline behavior, respectively. The absorption spectra for fruit and leaf extracts obtained from the UV-vis analyses peaked at 401 and 397 nm, and these peaks imply the appearance of optical energy gaps of 2.12 and 2.58 eV, accompanying spherical shapes of particles with diameters in the ranges of 12-20 and 50-80 nm, respectively. These silver nanoparticles together with the adopted green technique have a vast array of applications, specifically in the biomedical realm. In particular, they are being used to treat several diseases and are manifested as strong anti-tumor agents to medicate MCF-7 breast cancer cell lines in order to minimize the cell growth rate depending on their concentrations.

Removal of Pb ions using green Co3O4 nanoparticles: Simulation, modeling, adsorption, and biological studies

Chemical co-precipitation synthesized novel and green cobalt-oxide nanoparticles (Co₃O₄-NPs) utilizing cobalt nitrate as cobalt precursors. FTIR, Raman, scanning electron microscopy, UV visible, X-ray powder diffraction, and BET was used to analyze the surface characteristics, composition, and morphology, of the NPs. These green Co₃O₄-NPs were employed to remove Pb ions from simulated wastewater solutions at various pH, adsorbate, temperature, and dose concentrations. At dose 20 mg/L, pH 6.0, 20 mg/L (Pb(II) solution, 25 °C of temperature, and 45 min for equilibrium, nearly 99.44% of Pb ions were removed. To evaluate the kinetic data, four different kinetic equations were used. The data fit the Elovich rate equation better than the other three models. Thermodynamic and isothermal studies were also evaluated, and the maximum adsorption capacity of 450.45 mg/g was observed at 298.15 K. 0.1 M HNO_3, and 0.1 HCl were used to regenerate used Co₃O₄-NPs. Simulation results show the strong correlation of the Co atom in the Co₃O₄-NPs generates active delocalized surface states, which are energetically most favorable for heavy metal (Pb ions) adsorption and removal, supporting the experimental outcomes. In concluding remarks, green Co₃O₄-NPs can also be used as an adsorbent to remove Pb ions from wastewater bodies.

Sustainable and energy-efficient photocatalytic degradation of textile dye assisted by ecofriendly synthesized silver nanoparticles

In this study, we have touched on two goals of sustainable development, namely, the provision of clean water and sanitation and clean energy at acceptable prices, hoping for good health for all ages. A green economical method was used to prepare silver nanoparticles from chitosan biopolymer. AgNPs were fully characterized using UV-Vis, FTIR, XRD, HR-TEM, and EDX analysis. Different concentrations (0.02-0.18 g/L) of the nanoparticles were integrated into a mixture of heterogeneous nano photocatalysts TiO₂ and ZnO (1:1 weight ratio) under UV irradiation for the photocatalytic degradation of Acid Red 37 textile dye to obtain clean water. The kinetic description of the performed photocatalytic process was presented assuming a pseudo-first-order reaction. The data revealed that increasing the concentration of AgNPs in the catalytic mixture showed a high apparent rate constant (k_app) accompanied by an increase in the apparent quantum yield (%Q_app), followed by dye destruction after a very short time (t_0.5 = 3 min). Since the photocatalytic degradation process consumes electrical energy, the electrical energy per order (EE/O) was calculated, showing a low value of 20 kWh/m³/order, using 0.18 g/L AgNPs, indicating that the elicited photocatalytic degradation method is a sustainable one for the mineralization of the targeted dye.