Type-wide biochars loaded with Mg/Al layered double hydroxide as adsorbent for phosphate and mixed heavy metal ions in water

Pinecone biochar for the Adsorption of chromium (VI) from wastewater: Kinetics, thermodynamics, and adsorbent regeneration

High concentration of chromium in aquatic environments is the trigger for researchers to remediate it from wastewater environments. However, conventional water treatment methods have not been satisfactory in removing chromium from water and wastewater over the last decade. Similarly, many adsorption studies have been focused on one aspect of the treatment, but this study dealt with all aspects of adsorption packages to come up with a concrete conclusion. Therefore, this study aimed to prepare pinecone biochar (PBC) via pyrolysis and apply it for Cr(VI) removal from wastewater. The PBC was characterized using FTIR, SEM-EDX, BET surface area, pHpzc, Raman analyses, TGA, and XRD techniques. Chromium adsorption was studied under the influence of PBC dose, solution pH, initial Cr(VI) concentration, and contact time. The characteristics of PBC are illustrated by FTIR spectroscopic functional groups, XRD non-crystallite structure, SEM rough surface morphology, and high BET surface area125 m2/g, pore volume, 0.07 cm3/g, and pore size 1.4 nm. On the other hand, the maximum Cr (VI) adsorption of 69% was found at the experimental condition of pH 2, adsorbent dosage 0.25 mg/50 mL, initial Cr concentration 100 mg/L, and contact time of 120 min. Similarly, the experimental data were well-fitted with the Langmuir adsorption isotherm at R2 0.96 and the pseudo-second-order kinetics model at R2 0.99. This implies the adsorption process is mainly attributed to monolayer orientation between the adsorbent and adsorbate. In the thermodynamics study of adsorption, ΔG was found to be negative implying the adsorption process was feasible and spontaneous whereas the positive values of ΔH and ΔS indicated the adsorption process was endothermic and increasing the degree of randomness, respectively. Finally, adsorbent regeneration and reusability were successful up to three cycles. In conclusion, biochar surface modification and reusability improvements are urgently required before being applied at the pilot scale.

A spherical adsorbent produced from a bagasse biochar chitosan assembly for selective adsorption of platinum-group metals from wastewater

This study addresses the challenge of platinum-group metal scarcity by exploring the adsorption of these metals from industrial wastewater. An inexpensive adsorbent with selective platinum-group metal adsorption capacity, named chitosan/citric acid@diatomaceous earth-sugarcane bagasse (CTS/CA@DE-SBS), was newly synthesized. The material features a double coating of chitosan and diatomite on bagasse biochar, and it exhibits an excellent adsorption performance for platinum-group metals due to the synergistic effects of the biochar and chitosan-diatomaceous earth intercross-linked coatings. CTS/CA@DE-SBS achieved an 81 % adsorption efficiency and a static saturated adsorption capacity of 217 mg/g for Pt (IV) in water. Notably, the material exhibited selective adsorption properties for platinum-group metals dissolved in diverse aqueous solutions. The potential for the secondary recovery of platinum-group metals in complex aqueous bodies further underscores the significance of this adsorbent. In conclusion, this research introduces a promising solution for platinum-group metal shortages, offering a cost-effective and selective adsorbent with potential applications in the secondary recovery of these metals from industrial wastewater.

Effects of biochar on the manganese enrichment and oxidation by a microalga Scenedesmus quadricauda in the aquatic environment

Microalgae play a significant impact in the biogeochemical cycle of Mn(II) in the aquatic ecosystem. Meanwhile, the inflow of biochar into the water bodies is bound to impact the aquatic organisms. However, the influence of biochar on the manganese transformation in algae-rich water has not drawn much attention. Thus, we studied the effects of rice straw biochar on manganese enrichment and oxidation by a common type of algae in freshwater (Scenedesmus quadricauda). The results showed that Mn(II) was absorbed intracellularly and adsorbed extracellularly by active algal cells. A significant portion of enriched Mn(II) was oxidized to amorphous precipitates MnO2, MnOOH, and Mn2O3. Moreover, the extracellular bound Mn(II) content in the coexistent system of algae and biochar increased compared with the pure Scenedesmus quadricauda system. Nevertheless, the intracellular Mn content was continually lowered as the biochar dose rose from an initial 0.2 to 2.0 g·L-1, suggesting that Mn assimilation of the cell was suppressed. It was calculated that the total enrichment ability of Scenedesmus quadricauda in the algae-biochar coexistent system was 0.31- 15.32 mg Mn/g biomass, more than that in the pure algae system. More importantly, with biochar in the algae system, the amount of generated MnOx increased, and more Mn(II) was oxidized into highly-charged Mn(IV). This was probably because the biochar could relieve the stress of massive Mn(II) on algae and support the MnOx precipitates. In brief, moderate biochar promoted the Mn(II) accumulation by algal cells and its oxidation activity. This study offers deeper insight into the bioconversion of Mn(II) by algae and the potential impact of biochar application to the aquatic system.

Rapid and efficient removal of multiple heavy metals from diverse types of water using magnetic biochars derived from antibiotic fermentation residue

Pyrolysis is a promising method to treat antibiotic fermentation residue (AFR), a hazardous waste in China, with the benefits of detoxification and resource recycling. However, the application of the AFR-derived biochar has been limited yet, restricting the use of pyrolysis to treat AFR. Herein, for the first time, we reported the use of magnetic biochars derived from vancomycin fermentation residue to rapidly and efficiently co-adsorb multiple heavy metals from diverse types of water with complex matrices. The biochar prepared at 700 °C (labeled as VBC700) exhibited high affinity and selectivity for multiple heavy metals, especially for Ag(I), Hg(II), Pb(II), and Cu(II). The kinetics for Ag(I), Hg(II), and Pb(II) were ultrafast with an equilibrium time of only 5 min, while those for Cu(II) were relatively slower. The maximum adsorption capacity calculated from the Langmuir model for Ag(I), Hg(II), Pb(II), and Cu(II) reached 177.4, 105.9, 387.1, 124.5 mg/g, respectively, which were superior to much previously reported adsorbents. Impressively, Na(I), K(I), Ca(II), Mg(II), and salinity did not affect the capture of these heavy metals, and thus >99% of Ag(I), Pb(II), and Cu(II) were concurrently removed from complex water matrices including seawater, which has rarely been reported before. Furthermore, VBC700 remained high adsorption performance at pH ≥ 3. The adsorption mechanisms included ion exchange, precipitation, and inner-sphere complexation. Overall, the results demonstrate that VBC700 would be an excellent adsorbent to co-capture multiple heavy metals from diverse types of water, highlighting the feasibility of using pyrolysis to achieve a win-win goal for AFR management and heavy metal pollution control.

Removal and recovery of phosphate by modified oyster shell and its fertilizer application

The resource utilization of oyster shell (OS) is essential for environmental and human health because its random disposal can induce the environmental pollution and disease spread. Herein, MnFe2O4 loaded-oyster shell (OMFs) was prepared by co-precipitation method for phosphate removal and recovery. The salt etching and MnFe2O4 (MF) loading improved the adsorption performance of OS, and the maximum adsorption capacity of OMF0.02 reached 87.39 mg P/g. Phosphate adsorption was dominated by chemisorption and its rate was limited by membrane diffusion and intra-particle diffusion. Phosphate adsorption by OMF0.02 was involved with electrostatic attraction, surface precipitation and ligand exchange. 98.95 % phosphate on saturated adsorbent could be desorbed by 0.1 mol/L malic acid and 92.31 % adsorbed phosphate was released by 0.5 mol/L NaHCO3. Furthermore, phosphate adsorbed on OMF0.02 was plant-available basing on the results of water spinach growth trial. All the results implied the bright prospect of OMF0.02 in phosphate removal and recovery from wastewater.

A novel double-network hydrogel made from electrolytic manganese slag and polyacrylic acid-polyacrylamide for removal of heavy metals in wastewater

Electrolytic manganese slag (EMS), a bulk waste generated in industrial electrolytic manganese production, can be a cost-effective adsorbent for heavy metals removal after appropriate modification. In this study, EMS was activated by NaOH and then used to make the EMS-based double-network hydrogel (an EMS/PAA hydrogel) via a one-pot method. The results showed that the EMS/PAA hydrogel exhibits a high selective adsorption capacity of 153.85, 113.63 and 54.35 mg·g-1 for Pb (II), Cd (II) and Cu (II), respectively. In addition, Density Functional Theory (DFT) suggests that the adsorption energies (Ead) of Pb, Cd and Cu on SiO2/PAA of the EMS/PAA gels are - 4.15, - 1.96, and - 2.83 eV, respectively, and SiO2/PAA, with a strong affinity to Pb2+, is one of the reasons for the selective adsorption capacity of EMS/PAA gel for Pb2+. The removal efficiency of the EMS/PAA gel for Pb2+, Cd2+, Cu2+ decreased after four adsorption-desorption cycles by 20.00 %, 24.56 % and 46.56 %, respectively. Mechanism studies suggested that the elimination of the heavy metals by EMS/PAA gels mainly involves electrostatic attraction, inner-sphere complexation, and coordination interactions. The EMS/PAA hydrogels not only have high adsorption capacity, but are also easy to prepare and circulate, making them ideal for practical applications.

Layered double hydroxide loaded pinecone biochar as adsorbent for heavy metals and phosphate ion removal from water

This study modified pinecone biochar with a novel layered double hydroxide (LDH) to enhance its capacity to adsorb heavy metal and phosphate ions from water. The unmodified pinecone biochar demonstrated moderate adsorption capacities for Cu2+ (25.0 mg/g), Co2+ (24 mg/g), Pb2+ (22.9 mg/g), and phosphate (36.0 mg/g). However, after LDH modification, the LDH-biochar showed significantly improved adsorption capacities for Pb2+ (135.9 mg/g) and phosphate (160.8 mg/g) and a slight increase for Cu2+ (30.6 mg/g) and Co2+ (28.0 mg/g). The LDH layer enhances the adsorption of Pb2+ through ion exchange, phosphate through surface precipitation, and Cu2+ and Co2+ through surface complexation. The integration of LDH creates a multifaceted layer that utilizes various mechanisms to boost the biochar's adsorption capacity.

Utilizing adsorption of wood and its derivatives as an emerging strategy for the treatment of heavy metal-contaminated wastewater

The rapid development of the industrial sector has resulted in tremendous economic growth. However, this growth has also presented environmental challenges, specifically due to the substantial sewage generated and its contribution to the early warning of global water resource depletion. Large concentrations of poisonous heavy metals, including cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and nickel (Ni), are found in industrial effluent. Therefore, various studies are currently underway to provide effective solutions to alleviate heavy metal ion pollution in sewage. One emerging strategy for sewage pollution remediation is adsorption using wood and its derivatives. This approach is gaining popularity due to the porous structure, excellent mechanical properties, and easy chemical modification of wood. Recent studies have focused on removing heavy metal ions from sewage, summarising and analysing different technical principles, affecting factors, and mainstream chemical modification methods on wood. Furthermore, this work provides insight into potential future development direction for enhanced adsorption of heavy metal ions using wood and its derivatives in wastewater treatment. Overall, this review aims to raise awareness of environmental pollution caused by heavy metals in sewage and promote green environmental protection, low-carbon energy-saving, and sustainable solutions for sewage heavy metal treatment.