Power generation from cellulose using mixed and pure cultures of cellulose-degrading bacteria in a microbial fuel cell

Energy generation from bioelectrochemical techniques: Concepts, reactor configurations and modeling approaches

The process industries play a significant role in boosting the economy of any nation. However, poor management in several industries has been posing worrisome threats to an environment that was previously immaculate. As a result, the untreated waste and wastewater discarded by many industries contain abundant organic matter and other toxic chemicals. It is more likely that they disrupt the proper functioning of the water bodies by perturbing the sustenance of many species of flora and fauna occupying the different trophic levels. The simultaneous threats to human health and the environment, as well as the global energy problem, have encouraged a number of nations to work on the development of renewable energy sources. Hence, bioelectrochemical systems (BESs) have attracted the attention of several stakeholders throughout the world on many counts. The bioelectricity generated from BESs has been recognized as a clean fuel. Besides, this technology has advantages such as the direct conversion of substrate to electricity, and efficient operation at ambient and even low temperatures. An overview of the BESs, its important operating parameters, bioremediation of industrial waste and wastewaters, biodegradation kinetics, and artificial neural network (ANN) modeling to describe substrate removal/elimination and energy production of the BESs are discussed. When considering the potential for use in the industrial sector, certain technical issues of BES design and the principal microorganisms/biocatalysts involved in the degradation of waste are also highlighted in this review.

Green Power Generation by Microbial Fuel Cells Using Pharmaceutical Wastewater as Substrate and Electroactive Biofilms (Bacteria/Biocarbon)

In this work, electroactive biofilms of Bacillus subtilis (B. subtilis) or Escherichia coli (E. coli) were supported on functionalized biocarbon (AB7-F), which was synthesized from waste leather and was used as catalysts to develop bioanodes for microbial fuel cells (MFCs). This way, bioanodes were fabricated and further evaluated in a three-electrode cell using pharmaceutical wastewater (PWW) as substrate. The electrochemical measurements showed a higher performance of the bioanode based on AB7-f+ B. subtilis to oxidize organic matter from PWW. The polarization curves in the dual-chamber MFC showed that AB7-f+ B. subtilis bioanode can generate an open circuit voltage of 602 mV and a power density of 77 mW m−2. During long-term tests of the MFC, a variation in performance was observed, with a maximum of 96.3 mW m−2 on day 7. Such variation was attributed to the development of more stable biofilm as well as consumption of some compounds metabolized by bacteria grown on the bioanode. The results showed that AB7-f+ B. subtilis can be used as bioanode for MFCs with PWW as substrate removing around 45% of the chemical oxygen demand (COD).

Exploring the Function of Quorum Sensing Regulated Biofilms in Biological Wastewater Treatment: A Review

Quorum sensing (QS), a type of bacterial cell–cell communication, produces autoinducers which help in biofilm formation in response to cell population density. In this review, biofilm formation, the role of QS in biofilm formation and development with reference to biological wastewater treatment are discussed. Autoinducers, for example, acyl-homoserine lactones (AHLs), auto-inducing oligo-peptides (AIPs) and autoinducer 2, present in both Gram-negative and Gram-positive bacteria, with their mechanism, are also explained. Over the years, wastewater treatment (WWT) by QS-regulated biofilms and their optimization for WWT have gained much attention. This article gives a comprehensive review of QS regulation methods, QS enrichment methods and QS inhibition methods in biological waste treatment systems. Typical QS enrichment methods comprise adding QS molecules, adding QS accelerants and cultivating QS bacteria, while typical QS inhibition methods consist of additions of quorum quenching (QQ) bacteria, QS-degrading enzymes, QS-degrading oxidants, and QS inhibitors. Potential applications of QS regulated biofilms for WWT have also been summarized. At last, the knowledge gaps present in current researches are analyzed, and future study requirements are proposed.

Improved energy efficiency in microbial fuel cells by bioethanol and electricity co-generation

Background

Microbial electricity production has received considerable attention from researchers due to its environmental friendliness and low price. The increase in the number of intracellular electrons in a microbial fuel cell (MFC) helps to improve the MFC performance.

Results

In this study, we accumulated excess electrons intracellularly by knocking out the gene related to intracellular electron consumption in Saccharomyces cerevisiae, and the elevated intracellular electron pool positively influenced the performances of MFCs in terms of electricity production, while helping to increase ethanol production and achieve ethanol and electricity co-production, which in turn improved the utilization of substrates. The final knockout strain reached a maximum ethanol yield of 7.71 g/L and a maximum power density of 240 mW/m2 in the MFC, which was 12 times higher than that of the control bacteria, with a 17.3% increase in energy utilization.

Conclusions

The knockdown of intracellular electron-consuming genes reported here allowed the accumulation of excess electrons in cells, and the elevated intracellular electron pool positively influenced the electrical production performance of the MFC. Furthermore, by knocking out the intracellular metabolic pathway, the yield of ethanol could be increased, and co-production of ethanol and electricity could be achieved. Thus, the MFC improved the utilization of the substrate.

Impact of light on microalgal photosynthetic microbial fuel cells and removal of pollutants by nanoadsorbent biopolymers: Updates, challenges and innovations

Photosynthetic microbial fuel cells (PMFCs) with microalgae have huge potential for treating wastewater while simultaneously converting light energy into electrical energy. The efficiency of such cells directly depends on algal growth, which depends on light intensity. Higher light intensity results in increased potential as well as enhancement in generation of biomass rich in biopolymers. Such biopolymers are produced either by microbes at anode and algae at cathode or vice versa. The biopolymers recovered from these biological sources can be added in wastewater alone or in combination with nanomaterials to act as nanoadsorbents. These nanoadsorbents further increase the efficiency of PMFC by removing the pollutants like metals and dyes. In this review firstly the effect of different light intensities on the growth of microalgae, importance of diatoms in a PMFC and their impact on PMFCs efficiencies have been narrated. Secondly recovery of biopolymers from different biological sources and their role in removal of metals, dyes along with their impact on circular bioeconomy have been discussed. Thereafter bottlenecks and future perspectives in this field of research have been narrated.

Efficiency of microbial fuel cells in the treatment and energy recovery from food wastes: Trends and applications - A review

The rising global population and their food habits result in food wastage and cause an obstacle in its treatment and disposal. Due to the rapid shift in the lifestyle of the human population and urbanization, almost one-third of the food produced is wasted from various sectors like domestic sources, agricultural sectors, and industrial sectors. These food resources squandered are rich in organic biomolecules which can cause complications upon direct disposal in the environment. Conventional disposal methods like composting, landfills and incineration demand high costs besides causing severe environmental and health issues. To overcome these demerits of the conventional methods and to avoid the loss of rich organic food resources, there is an immediate need for a sustainable and eco-friendly solution for the valorization of the food wastes. Microbial fuel cells (MFCs) are gaining attention, due to their ideal approach in the production of electricity and parallel treatment of organic food wastes. The MFCs are significant as an innovative approach using microorganisms and oxidizing the organic food wastes into bio-electricity. In this review, the recent advancements and practices of the MFCs in the field of food waste treatment and management along with electricity production are discussed. The major outcome of this work highlights the setting up of MFC for the treatment of higher volumes of food waste residues and enhancing the bioelectricity production in an optimal condition. For further improvements in the food waste treatments using MFCs, greater understanding and more research needs are to be focused on the commercialization, different operational modes, operational types, and low-cost fabrication coupled with careful examination of scale-up factors.

Recent advancements in microbial fuel cells: A review on its electron transfer mechanisms, microbial community, types of substrates and design for bio-electrochemical treatment

The development in urbanization, growth in industrialization and deficiency in crude oil wealth has made to focus more for the renewable and also sustainable spotless energy resources. In the past two decades, the concepts of microbial fuel cell have caught more considerations among the scientific societies for the probability of converting, organic waste materials into bio-energy using microorganisms catalyzed anode, and enzymatic/microbial/abiotic/biotic cathode electro-chemical reactions. The added benefit with MFCs technology for waste water treatment is numerous bio-centered processes are available such as sulfate removal, denitrification, nitrification, removal of chemical oxygen demand and biological oxygen demand and heavy metals removal can be performed in the same MFC designed systems. The various factors intricate in MFC concepts in the direction of bioenergy production consists of maximum coulombic efficiency, power density and also the rate of removal of chemical oxygen demand which calculates the efficacy of the MFC unit. Even though the efficacy of MFCs in bioenergy production was initially quietly low, therefore to overcome these issues few modifications are incorporated in design and components of the MFC units, thereby functioning of the MFC unit have improvised the rate of bioenergy production to a substantial level by this means empowering application of MFC technology in numerous sectors including carbon capture, bio-hydrogen production, bioremediation, biosensors, desalination, and wastewater treatment. The present article reviews about the microbial community, types of substrates and information about the several designs of MFCs in an endeavor to get the better of practical difficulties of the MFC technology.

Performance of Yeast Microbial Fuel Cell Integrated with Sugarcane Bagasse Fermentation for COD Reduction and Electricity Generation

The purpose of this analysis is to evaluate the efficiency of the Microbial Fuel Cell (MFC) system incorporated with the fermentation process, with the aim of reducing COD and generating electricity, using sugarcane bagasse extract as a substrate, in the presence and absence of sugarcane fibers. There is a possibility of turning bagasse extract into renewable bioenergy to promote the sustainability of the environment and energy. As a result, the integration of liquid fermentation (LF) with MFC has improved efficiency compared to semi-solid state fermentation (S-SSF). The maximum power generated was 14.88 mW/m2, with an average COD removal of 39.68% per cycle. The variation margin of the liquid fermentation pH readings remained slightly decrease, with a slight deflection of +0.14 occurring from 4.33. With the absence of bagasse fibers, biofilm can grow freely on the anode surface so that the transfer of electrons is fast and produces a relatively high current. Experimental data showed a positive potential after an effective integration of the LF and MFC systems in the handling of waste. The product is then simultaneously converted into electrical energy. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Application of microbial electrochemical technologies for the treatment of petrochemical wastewater with concomitant valuable recovery: A review

Petrochemical industry is one of the major and rapidly growing industry that generates a variety of toxic and recalcitrant organic pollutants as by-products, which are not only harmful to the aquatic animals but also affects human health. The majority of the components of petrochemical wastewater (PW) are carcinogenic, genotoxic and phytotoxic in nature; hence, this complex wastewater generated from different petrochemical processes should be efficiently treated prior to its disposal in natural water bodies. The established technologies like advanced oxidation, membrane bioreactor, electrocoagulation and activated sludge process employed for the treatment of PW are highly energy intensive and incurs high capital and operation cost. Moreover, these technologies are not effective in completely eliminating petroleum hydrocarbons present in PW. Thus, to reduce the energy requirement and also to transform the chemical energy trapped in these organic matters present in this wastewater into bioelectricity and other value-added products, microbial electrochemical technologies (METs) can be efficaciously used, which would also compensate the treatment cost by transforming these pollutants into bioenergy and valuables. In this regard, this review elucidates the feasibility and application of different METs as an appropriate alternative for the treatment of PW. Furthermore, the numerous bottlenecks towards the real-life application and commercialization of pioneering METs have also been articulated.

Lignocellulose, Cellulose and Lignin as Renewable Alternative Fuels for Direct Biomass Fuel Cells

In recent years the use of renewable sources, such as lignocellulosic biomass (LCB), as the fuel for various types of fuel cells received growing interest. Different types of fuel cells, that is, operated at low temperatures (T<100 °C; microbial fuel cells (MFC), alkaline (AFCs) and flow fuel cells (FFCs)), intermediate temperatures (T in the range 150-300 °C, proton-conducting inorganic-organic composite membrane fuel cells), and high temperatures (T≥500 °C, direct carbon fuel cells (DCFCs)), have been used for the conversion of the chemical energy in LCB to electrical energy. The economic advantage of the direct use of LCB consists of avoiding the acid hydrolysis of cellulose to glucose for low-temperature fuel cells and the pretreatment at high temperatures necessary to convert biomass to biochar (pyrolysis) in the case of high-temperature fuel cells. In this Review, the characteristics of direct biomass fuel cells are presented and their performance is compared with that of indirect biomass fuel cells fed with glucose (low-temperature fuel cells) and biochar (high-temperature fuel cells).

Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells

Sustainable production of electricity from renewable sources by microorganisms is considered an attractive alternative to energy production from fossil fuels. In recent years, research on microbial fuel cells (MFCs) technology for electricity production has increased. However, there are problems with up-scaling MFCs due to the fairly low power output and high operational costs. One of the approaches to improving energy generation in MFCs is by modifying the existing anode materials to provide more electrochemically active sites and improve the adhesion of microorganisms. The aim of this review is to present the effect of anode modification with carbon compounds, metallic nanomaterials, and polymers and the effect that these modifications have on the structure of the microbiological community inhabiting the anode surface. This review summarizes the advantages and disadvantages of individual materials as well as possibilities for using them for environmentally friendly production of electricity in MFCs.

Insights into Advancements and Electrons Transfer Mechanisms of Electrogens in Benthic Microbial Fuel Cells

Benthic microbial fuel cells (BMFCs) are a kind of microbial fuel cell (MFC), distinguished by the absence of a membrane. BMFCs are an ecofriendly technology with a prominent role in renewable energy harvesting and the bioremediation of organic pollutants through electrogens. Electrogens act as catalysts to increase the rate of reaction in the anodic chamber, acting in electrons transfer to the cathode. This electron transfer towards the anode can either be direct or indirect using exoelectrogens by oxidizing organic matter. The performance of a BMFC also varies with the types of substrates used, which may be sugar molasses, sucrose, rice paddy, etc. This review presents insights into the use of BMFCs for the bioremediation of pollutants and for renewable energy production via different electron pathways.

Electricity production of microbial fuel cells by degrading cellulose coupling with Cr(VI) removal

A facultative exoelectrogen strain Lsc-8 belonging to the Cellulomonas genus with the ability to degrade carboxymethyl cellulose (CMC) coupled with the reduction of Cr(VI), was successfully isolated from rumen content. The maximum output power density of the microbial fuel cells (MFCs) inoculated strain Lsc-8 was 9.56 ± 0.37 mW·m^-2 with CMC as the sole carbon source. From the biomass analysis it can be seen that the electricity generation of the MFCs was primarily attributed to the planktonic cells of strain Lsc-8 rather than the biofilm attached on the electrode, which was different from Geobacter sulfurreducens. Especially, during electricity generation of the MFCs using CMC as carbon source in the anode chamber, the Cr(VI) reduction were simultaneously realized. And it is also found that the Cr(VI) reduction ratio by strain Lsc-8 is directly related to the initial Cr(VI) concentration, and it increased with the increase of initial Cr(VI) concentration at first, then started to decrease when the Cr(VI) concentration was above 21 mg ·L^-1. Meanwhile, the highest output power density of 3.47 ± 0.28 mW·m^-2 was observed coupling with 95.22 ± 2.72 % of Cr(VI) reduction. These data suggested that the strain Lsc-8 could reduce high toxicity Cr(VI) to low toxicity Cr(III) coupled with electricity generation in MFCs with CMC as the carbon source. Our results also suggested that this study will provide a possibility to simultaneously degrade Cr(VI) and generate electricity by using cellulose as the carbon source via MFCs.

Recent Advances in Anodes for Microbial Fuel Cells: An Overview

The recycling and treatment of wastewater using microbial fuel cells (MFCs) has been attracting significant attention as a way to control energy crises and water pollution simultaneously. Despite all efforts, MFCs are unable to produce high energy or efficiently treat pollutants due to several issues, one being the anode's material. The anode is one of the most important parts of an MFC. Recently, different types of anode materials have been developed to improve the removal rate of pollutants and the efficiency of energy production. In MFCs, carbon-based materials have been employed as the most commonly preferred anode material. An extensive range of potentials are presently available for use in the fabrication of anode materials and can considerably minimize the current challenges, such as the need for high quality materials and their costs. The fabrication of an anode using biomass waste is an ideal approach to address the present issues and increase the working efficiency of MFCs. Furthermore, the current challenges and future perspectives of anode materials are briefly discussed.

Bioelectricity generation using microalgal biomass as electron donor in a bio-anode microbial fuel cell

In this study, microalgal biomass waste (Chlorella regularis) was treated while simultaneously producing bioelectricity in a microbial fuel cell (MFC). Algal biomass was the sole electron donor and was enriched with easily biodegradable proteins (46%) and carbohydrates (22%). The generated power density was 0.86 W/m² and the columbic efficiency reached ∼61.5%.The power generation could be further increased to 1.07 W/m² by using a biomass waste concentration enhancement strategy with maximum chemical oxygen demand (COD) removal of ∼65.2%. Via direct comparison, the power generation and COD removal capability of the algal-fed MFC was close to that of the commercial acetate-fed MFC. The algae-fed MFC presented superior electrochemical characteristics that were attributed to the complicated composition of the biomass anolyte. It possessed a multiple anode respiring bacterial group and diverse microbial community. Hence, this study provides a new strategy for the utilization of microalgal biomass as a bioresource.

Comparative analysis of microbial fuel cell based biosensors developed with a mixed culture and Shewanella loihica PV-4 and underlying biological mechanism

Microbial fuel cell based biosensors (MFC-biosensors) utilize anode biofilms as biological recognition elements to monitor biochemical oxygen demand (BOD) and biotoxicity. However, the relatively poor sensitivity constrains the application of MFC-biosensors. To address this limitation, this study provided a systematic comparison of sensitivity between the MFC-biosensors constructed with two inocula. Higher biomass density and viability were both observed in the anode biofilm of the mixed culture MFC, which resulted in better sensitivity for BOD assessment. Compared with using mixed culture as inoculum, the anode biofilm developed with Shewanella loihica PV-4 presented lower content of extracellular polymeric substances and poorer ability to secrete protein under toxic shocks. Moreover, the looser structure in the S. loihica PV-4 biofilm further facilitated its susceptibilities to toxic agents. Therefore, the MFC-biosensor with a pure culture of S. loihica PV-4 delivered higher sensitivity for biotoxicity monitoring. This study proposed a new perspective to enhance sensor performance.

Effect of vitamins and cell constructions on the activity of microbial fuel cell battery

Construction of efficient performance of microbial fuel cells (MFCs) requires certain practical considerations. In the single chamber microbial fuel cell, there is no border between the anode and the cathode, thus the diffusion of the dissolved oxygen has a contrary effect on the anodic respiration and this leads to the inhibition of the direct electron transfer from the biofilm to the anodic surface. Here, a fed-batch single chambered microbial fuel cells are constructed with different distances 3 and 6 cm (anode- cathode spacing), while keeping the working volume is constant. The performance of each MFC is individually evaluated under the effects of vitamins & minerals with acetate as a fed load. The maximum open circuit potential during testing the 3 and 6 cm microbial fuel cells is about 946 and 791 mV respectively. By decreasing the distance between the anode and the cathode from 6 to 3 cm, the power density is decreased from 108.3 mW m⁻² to 24.5 mW m⁻². Thus, the short distance in membrane-less MFC weakened the cathode and inhibited the anodic respiration which affects the overall performance of the MFC efficiency. The system is displayed a maximum potential of 564 and 791 mV in absence & presence of vitamins respectively. Eventually, the overall functions of the acetate single chamber microbial fuel cell can be improved by the addition of vitamins & minerals and increasing the distance between the cathode and the anode.

Characterization of the Electric Current Generation Potential of the Pseudomonas aeruginosa Using Glucose, Fructose, and Sucrose in Double Chamber Microbial Fuel Cell

Background: Different concentrations of the simple carbon substrates i.e. glucose, fructose, and sucrose were tested to enhance the performance of the mediator-less double chamber microbial fuel cell (MFC). Objectives: The power generation potential of the different electron donors was studied using a mesophilic Fe (III) reducer and non-fermentative bacteria Pseudomonas aeruginosa-isolated from municipal wastewater. Materials and Methods: A double chamber MFC was operated with three different electron donors including glucose, sucrose, and fructose. Substrate utilization pattern was determined through chemical oxygen demand (COD) removal rate and voltage generation. In addition, electrochemical, physicochemical, and microscopic analysis of the anodic biofilm was conducted. Results:P. aeruginosa was proven to effectively utilize hexose and pentose sugars through anode respiration. Higher power density was generated from glucose (136 ± 87 mWm²) lead by fructose (3.6 ± 1.6 mWm²) and sucrose (8.606 ± mWm²). Furthermore, a direct relation was demonstrated between current generation rate and COD removal efficiency. COD removal rates were, 88.5% ± 4.3%, 67.5% ± 2.6%, and 54.2% ± 1.9% with the three respective sugars in MFC. Scanning electron microscopy (SEM) demonstrated that the bacterial attachment was considerably abundant in glucose fed MFC than in the fructose and sucrose operated MFC. Conclusion: This study has revealed that electron donor type in the anodic compartment controls the growth of anodic biofilm or anode-respiring bacteria (ARB).

Freestanding and flexible graphene papers as bioelectrochemical cathode for selective and efficient CO2 conversion

During microbial electrosynthesis (MES) driven CO₂ reduction, cathode plays a vital role by donating electrons to microbe. Here, we exploited the advantage of reduced graphene oxide (RGO) paper as novel cathode material to enhance electron transfer between the cathode and microbe, which in turn facilitated CO₂ reduction. The acetate production rate of Sporomusa ovata-driven MES reactors was 168.5 ± 22.4 mmol m⁻² d⁻¹ with RGO paper cathodes poised at −690 mV versus standard hydrogen electrode. This rate was approximately 8 fold faster than for carbon paper electrodes of the same dimension. The current density with RGO paper cathodes of 2580 ± 540 mA m⁻² was increased 7 fold compared to carbon paper cathodes. This also corresponded to a better cathodic current response on their cyclic voltammetric curves. The coulombic efficiency for the electrons conversion into acetate was 90.7 ± 9.3% with RGO paper cathodes and 83.8 ± 4.2% with carbon paper cathodes, respectively. Furthermore, more intensive cell attachment was observed on RGO paper electrodes than on carbon paper electrodes with confocal laser scanning microscopy and scanning electron microscopy. These results highlight the potential of RGO paper as a promising cathode for MES from CO₂.

Exploring the Bioelectrochemical Characteristics of Activated Sludge Using Cyclic Voltammetry

Due to the potential interest, bioelectrochemical responses of activated sludge using the three-electrode system are tested. From the cyclic voltammograms, the oxidation current output is increasing due to incubation time increase, whereas 5, 25 and 39.33 μA are obtained after 3, 72 and 96 h, respectively. Changing the working electrode from glassy carbon to carbon paste led to the increase in the electrochemical signal from 0.3 to be 3.72 μA. On the other hand, the use of the lipophilic redox mediator (2,6-dichlorophenolindophenol (DCIP)) amplified the oxidation current to reach 19.9 μA instead of 2.1 μA. Based on these findings, the mixed microbial community of the activated sludge is exploited as a catalyst for the bio-oxidation of the degradable organic substrates, while DCIP is used as a mobile electron carrier from the intracellular matrix of the metabolically active cells to the carbon paste electrode which served as the final electron acceptor. Therefore, the extracellular electron transfer from the formed active biofilm at the electrode surface is assisted by the existence of DCIP.

Microbial diversity structure in acetate single chamber microbial fuel cell for electricity generation

This study investigates the performance of acetate feed membrane less single chamber microbial fuel cell and physical characterization of the bio film present on the anode surface using Scanning Electron Microscope (SEM) and 16S rRNA analyzer. The performance has been investigated using Teflon treated carbon paper with 0.3 mg/cm2 Pt/C loaded as a cathode and carbon paper as an anode. The maximum open circuit potential is noticed as 791 mV, the system successfully revealed a maximum power density of 86.1 mW m-2 at stable current density of 354 mA m-2 with high coulombic efficiency of 65% at maximum degradation rate of 96%. SEM showed the dense adherence of microorganisms on the anode. 16S rRNA sequencing results indicates phylogenetic mixture in the communities of anodic biofilm and there is no single dominant bacterial species. The dominant phyla are Firmicutes, Gamma Proteobacteria, Alpha Proteobacteria, Actinobacteria, with ten dominant microbial strains: Bacillus firmus, Shewanella profunda, Bacillus isronensis, Brevundimonas bullata, Pseudomonas putida, Planococcus citreus, Micrococcus endophyticus, Acinetobacter tandoii, Bacillus safensis and Shewanella xiamenensis.

Toxicity assessment using different bioassays and microbial biosensors

Toxicity assessment of water streams, wastewater, and contaminated sediments, is a very important part of environmental pollution monitoring. Evaluation of biological effects using a rapid, sensitive and cost effective method can indicate specific information on ecotoxicity assessment. Recently, different biological assays for toxicity assessment based on higher and lower organisms such as fish, invertebrates, plants and algal cells, and microbial bioassays have been used. This review focuses on microbial biosensors as an analytical device for environmental, food, and biomedical applications. Different techniques which are commonly used in microbial biosensing include amperometry, potentiometry, conductometry, voltammetry, microbial fuel cells, fluorescence, bioluminescence, and colorimetry. Examples of the use of different microbial biosensors in assessing a variety of environments are summarized.

Electricity production from municipal solid waste using microbial fuel cells

The organic content of municipal solid waste has long been an attractive source of renewable energy, mainly as a solid fuel in waste-to-energy plants. This study focuses on the potential to use microbial fuel cells to convert municipal solid waste organics into energy using various operational conditions. The results showed that two-chamber microbial fuel cells with carbon felt and carbon felt allocation had a higher maximal power density (20.12 and 30.47 mW m(-2) for 1.5 and 4 L, respectively) than those of other electrode plate allocations. Most two-chamber microbial fuel cells (1.5 and 4 L) had a higher maximal power density than single-chamber ones with corresponding electrode plate allocations. Municipal solid waste with alkali hydrolysis pre-treatment and K3Fe(CN)6 as an electron acceptor improved the maximal power density to 1817.88 mW m(-2) (~0.49% coulomb efficiency, from 0.05-0.49%). The maximal power density from experiments using individual 1.5 and 4 L two-chamber microbial fuel cells, and serial and parallel connections of 1.5 and 4 L two-chamber microbial fuel cells, was found to be in the order of individual 4 L (30.47 mW m(-2)) > serial connection of 1.5 and 4 L (27.75) > individual 1.5 L (20.12) > parallel connection of 1.5 and 4 L (17.04) two-chamber microbial fuel cells . The power density using municipal solid waste microbial fuel cells was compared with information in the literature and discussed.

Electricity generation from rapeseed straw hydrolysates using microbial fuel cells

Rapeseed straw is an attractive fuel material for microbial fuel cells (MFCs) due to its high content of carbohydrates (more than 60% carbohydrates). This study has demonstrated that reducing sugars can be efficiently extracted from raw rapeseed straw by combination of hydrothermal pretreatment and enzymatic hydrolysis followed by utilization as a fuel in two-chamber MFCs for electrical power generation. The most efficient method of saccharification of this lignocellulosic biomass (17%) turned out hydrothermal pretreatment followed by enzymatic hydrolysis. Electricity was produced using hydrolysate concentrations up to 150 mg/dm(3). The power density reached 54 mW/m(2), while CEs ranged from 60% to 10%, corresponding to the initial reducing sugar concentrations of 10-150 mg/dm(3). The COD degradation rates based on charge calculation increased from 0.445 g COD/m(2)/d for the hydrolysate obtained with the microwave treatment to 0.602 g COD/m(2)/d for the most efficient combination of hydrothermal treatment followed by enzymatic hydrolysis.

Novel method for screening microbes for application in microbial fuel cell

The ability to produce and to transport exo-electrons by microbes either to external acceptors or to electrodes are reported in our study. All investigated microorganisms (exception of Lactobacillus plantarum) exhibited strong iron-reducing capabilities in the absence of mediator meaning production and secretion of exo-electrons to the growth medium. L.plantarum, Saccharomyces cerevisiae and Escherichia coli need an electron shuttle molecule to reduce Fe(3+) ion. Significant correlation was observed between growth and iron-reducing capacity, as well as between initial cell counts and iron-reducing capacity. Changes of bio-current generated in MFC and iron-reduction were experimentally monitored, and a mathematical model was established by regression analysis. Based on these results, a novel and rapid screening method was developed for the selection of microorganisms for potential application in MFC. The method is based on the measurement of absorbance of bacterial and yeast cultures at 460 nm, providing a robust and high sample throughput approach.