Modifying the endogenous electron fluxes of Rhodobacter sphaeroides 2.4.1 for improved electricity generation

Photo-assisted microbial fuel cell systems: critical review of scientific rationale and recent advances in system development

Bioelectrochemical systems such as microbial fuel cells (MFCs) have gained extensive attention due to their abilities to simultaneously treat wastewater and generate renewable energy resources. Recently, to boost the system performance, the photoelectrode has been incorporated into MFCs for effectively exploiting the synergistic interaction between light and microorganisms, and the resultant device is known as photo-assisted microbial fuel cells (photo-MFCs). Combined with the metabolic reaction of organic compounds by microorganisms, photo-MFCs are capable of simultaneously converting both chemical energy and light energy into electricity. This article aims to systematically review the recent advances in photo-MFCs, including the introduction of specific photosynthetic microorganisms used in photo-MFCs followed by the discussion of the fundamentals and configurations of photo-MFCs. Moreover, the materials used for photoelectrodes and their fabrication approaches are also explored. This review has shown that the innovative strategy of utilizing photoelectrodes in photo-MFCs is promising and further studies are warranted to strengthen the system stability under long-term operation for advancing practical application.

Moving towards the enhancement of extracellular electron transfer in electrogens

Electrogens are very common in nature and becoming a contemporary theme for research as they can be exploited for extracellular electron transfer. Extracellular electron transfer is the key mechanism behind bioelectricity generation and bioremediation of pollutants via microbes. Extracellular electron transfer mechanisms for electrogens other than Shewanella and Geobacter are less explored. An efficient extracellular electron transfer system is crucial for the sustainable future of bioelectrochemical systems. At present, the poor extracellular electron transfer efficiency remains a decisive factor in limiting the development of efficient bioelectrochemical systems. In this review article, the EET mechanisms in different electrogens (bacteria and yeast) have been focused. Apart from the well-known electron transfer mechanisms of Shewanella oneidensis and Geobacter metallireducens, a brief introduction of the EET pathway in Rhodopseudomonas palustris TIE-1, Sideroxydans lithotrophicus ES-1, Thermincola potens JR, Lysinibacillus varians GY32, Carboxydothermus ferrireducens, Enterococcus faecalis and Saccharomyces cerevisiae have been included. In addition to this, the article discusses the several approaches to anode modification and genetic engineering that may be used in order to increase the rate of extracellular electron transfer. In the side lines, this review includes the engagement of the electrogens for different applications followed by the future perspective of efficient extracellular electron transfer.

Anode Modification with Fe2O3 Affects the Anode Microbiome and Improves Energy Generation in Microbial Fuel Cells Powered by Wastewater

This study investigated how anode electrode modification with iron affects the microbiome and electricity generation of microbial fuel cells (MFCs) fed with municipal wastewater. Doses of 0.0 (control), 0.05, 0.1, 0.2, and 0.4 g Fe2O3 per the total anode electrode area were tested. Fe2O3 doses from 0.05 to 0.2 g improved electricity generation; with a dose of 0.10 g Fe2O3, the cell power was highest (1.39 mW/m2), and the internal resistance was lowest (184.9 Ω). Although acetate was the main source of organics in the municipal wastewater, propionic and valeric acids predominated in the outflows from all MFCs. In addition, Fe-modification stimulated the growth of the extracellular polymer producers Zoogloea sp. and Acidovorax sp., which favored biofilm formation. Electrogenic Geobacter sp. had the highest percent abundance in the anode of the control MFC, which generated the least electricity. However, with 0.05 and 0.10 g Fe2O3 doses, Pseudomonas sp., Oscillochloris sp., and Rhizobium sp. predominated in the anode microbiomes, and with 0.2 and 0.4 g doses, the electrogens Dechloromonas sp. and Desulfobacter sp. predominated. This is the first study to holistically examine how different amounts of Fe on the anode affect electricity generation, the microbiome, and metabolic products in the outflow of MFCs fed with synthetic municipal wastewater.

Photosynthetic microbial fuel cells for methanol treatment using graphene electrodes

Photosynthetic microbial fuel cells (pMFC) represent a promising approach for treating methanol (CH₃OH) wastewater. However, their use is constrained by a lack of knowledge on the extracellular electron transfer capabilities of photosynthetic methylotrophs, especially when coupled with metal electrodes. This study assessed the CH₃OH oxidation capabilities of Rhodobacter sphaeroides 2.4.1 in two-compartment pMFCs. A 3D nickel (Ni) foam modified with plasma-grown graphene (Gr) was used as an anode, nitrate mineral salts media (NMS) supplemented with 0.1% CH₃OH as anolyte, carbon brush as cathode, and 50 mM ferricyanide as catholyte. Two simultaneous pMFCs that used bare Ni foam and carbon felt served as controls. The Ni/Gr electrode registered a two-fold lower charge transfer resistance (0.005 kΩ cm²) and correspondingly 16-fold higher power density (141 mW/m²) compared to controls. The underlying reasons for the enhanced performance of R. sphaeroides at the graphene interface were discerned. The real-time polymerase chain reaction (PCR) analysis revealed the upregulation of cytochrome c oxidase, aa3 type, subunit I gene, and Flp pilus assembly protein genes in the sessile cells compared to their planktonic counterparts. The key EET pathways used for sustaining CH₃OH oxidation were discussed.

Enhanced CO2 electroconversion of Rhodobacter sphaeroides by cobalt-phosphate complex assisted water oxidation

CO₂ can be a next generation feedstock for electricity-driven bioproduction due to its abundance and availability. Microbial electrosynthesis (MES), a promising technique for CO₂ electroconversion, provides an attractive route for the production of valuable products from CO₂, but issues surrounding efficiency and reasonable productivity should be resolved. Improving the anode performance for water oxidation under neutral pH is one of the most important aspects to advance current MES. Here, we introduce cobalt-phosphate (Co-Pi) assisted water oxidation at the counter electrode (i.e., anode) to upgrade the MES performance at pH 7.0. We show that CO₂ can be converted by photochemoautotrophic bacterium, Rhodobacter sphaeroides into organic acids and carotenoids in the MES reactor. Planktonic cells of R. sphareroides in the Co-Pi anode equipped MES reactor was ca. 1.5-fold higher than in the control condition (w/o Co-Pi). The faradaic efficiency of the Co-Pi anode equipped MES reactor was remarkably higher (58.3%) than that of the bare anode (27.8%). While the system can improve the CO₂ electroconversion nonetheless there are some further optimizations are necessary.

Microbial fuel cell improves restoration of Hydrilla verticillata in an algae-rich sediment microcosm system

Settled algae may be used as nutrient for macrophyte establishment, but also can induce marked macrophyte decline during deep anaerobic decomposition. Sediment microbial fuel cells (SMFCs) may promote the utilization of algae-derived nutrients and relieve bio-toxicity from settled algae to submerged macrophytes, thus facilitating plant production. To test these hypotheses, a 62-day comparative study was designed and conducted in microcosms with the following six treatments: control (open-circuit SMFC), plant (open-circuit SMFC with plants), algae (open-circuit SMFC with algae), algae-plant (open-circuit SMFC with algae and plants), algae-SMFC (closed-circuit SMFC with algae), and algae-plant-SMFC (closed-circuit SMFC with algae and plants). The results showed that the presence of Hydrilla verticillata improved the power generation of SMFCs when algae were used as substrates during the whole operation. The decomposition of sedimented algae experienced two periods since the injection. During the slight decomposition period (14-38 day), the algal retention in sediments was enhanced by H. verticillata as a nutrient source. Nitrogen (N) assimilation in plant shoots was facilitated under electrogenesis due to a simultaneous increase of algae-derived dissolved inorganic carbon (DIC) and ammonium (NH₄⁺) in the water column. At the end of the 38th day, the biomass of H. verticillata were increased by 21.4% and 52.3%, respectively, in the algae-plant and algae-plant-SMFC, compared with that in plant treatment. Obvious NH₄⁺-stress was exerted on H. verticillata during the following intense algal decomposition period (38-62 day). Compared with shoots, roots of H. verticillata were more sensitive to the biotoxicity of algae-derived NH₄⁺. The electrogenetic process diverted the degradation pathway from acetoclastic methanogenesis to electrogenesis via redox cycle, resulting in delayed algal decomposition in algae-SMFC treatment. In addition, electrogenesis enhanced the removal of algae-derived N. As a result, NH₄⁺ toxicity to plant roots was effectively alleviated, and sedimented algae served as a stable nutrient source for plant development. Stable transfer rate of algae-derived N from sediments to plant roots was observed, while the assimilation rate of algae-derived N from water column to plant shoots showed a constant increase in the algae-plant-SMFC treatment. Electrogenesis enhanced N-fixing capacity belonged to rhizosphere of H. verticillata, evidenced by greater enrichment of some plant growth-promoting rhizobacteria (PGPRs), including Bradyrhizobium, Mycobacterium, Paenibacillus, Mesorhizobium, and Roseomonas in the algae-plant-SMFC treatment. At the end of the experiment, marked increases in the production of H. verticillata in algae-plant-SMFC were observed, with 90.1% and 32.8%, respectively, when compared with algae-plant and plant treatments (p < 0.05). SMFC application could be used as a strategy to promote the growth of submerged macrophytes in algae-rich sediments.

Blending of microbial inocula: An effective strategy for performance enhancement of clayware Biophotovoltaics microbial fuel cells

Performance of clayware Biophotovoltaics (BPVs) with three variants of inocula namely anoxygenic photosynthetic bacteria (APB) rich Effective microbes (EM), Up-flow anaerobic sludge blanket reactor (UASB) sludge, SUPER-MIX the blend of EM and UASB inoculum were evaluated on the basis of electrical output and pollutant removal. SUPER-MIX inocula with microbial community comprising of 28.42% APB and 71.58% of other microbes resulted in peak power density of 275 mW/m², 69.3 ± 1.74% Coulombic efficiency and 91 ± 3.96% organic matter removal. The higher performance of the SUPER-MIX than EM and UASB inocula was due to the syntrophic associations of the various APBs and other heterogenous microorganisms in perfect blend which improved biocatalytic electron transfer, electro-kinetic activities with higher redox current and bio-capacitance. The promising performance of clayware BPVs with SUPER-MIX inocula indicate the possibility of BPVs to move towards the scale-up process to minimize the investment towards pure culture by effective blending strategies of inocula.

Molecular Profiling and Optimization Studies for Growth and PHB Production Conditions in Rhodobacter sphaeroides

In the recent climate change regime, industrial demand for renewable materials to replace petroleum-derived polymers continues to rise. Of particular interest is polyhydroxybutyrate (PHB) as a substitute for polypropylene. Accumulating evidence indicates that PHB is highly produced as a carbon storage material in various microorganisms. The effects of growth conditions on PHB production have been widely studied in chemolithotrophs, particularly in Rhodobacter. However, the results on PHB production in Rhodobacter have been somewhat inconsistent due to different strains and experimental conditions, and it is currently unclear how diverse environmental factors are linked with PHB production. Here, we report optimized growth conditions for PHB production and show that the growth conditions are closely related to reactive oxygen species (ROS) regulation. PHB accumulates in cells up to approximately 50% at the highest level under dark-aerobic conditions as opposed to light aerobic/anaerobic conditions. According to the time-course, PHB contents increased at 48 h and then gradually decreased. When observing the effect of temperature and medium composition on PHB production, 30 °C and a carbon/nitrogen ratio of 9:1 or more were found to be most effective. Among PHB biosynthetic genes, PhaA and PhaB are highly correlated with PHB production, whereas PhaC and PhaZ showed little change in overall expression levels. We found that, while the amount of hydrogen peroxide in cells under dark conditions was relatively low compared to the light conditions, peroxidase activities and expression levels of antioxidant-related genes were high. These observations suggest optimal culture conditions for growth and PHB production and the importance of ROS-scavenging signaling with regard to PHB production.

Performance and mechanism of carbon dioxide fixation by a newly isolated chemoautotrophic strain Paracoccus denitrificans PJ-1

CO₂ is regarded as a major contributor to the global warming. CO₂ utilization is promising to reduce the CO₂ emissions. Currently, the biofixation of CO₂ using chemoautotrophs has markedly gain interest in CO₂ utilization. In this study, a newly isolated chemoautotroph, Paracoccus denitrificans PJ-1, was used for the biofixation of CO₂ under anaerobic condition. Experimental results revealed that Paracoccus denitrificans PJ-1 achieved a high carbon fixation rate (13.25 mg·L^-1·h^-1) which was ∼10 times faster than the previous reported chemotrophic bacteria using thiosulfate as electron donor. The best CO₂ fixation activity of Paracoccus denitrificans PJ-1 was achieved at the pH value of 9.0 and CO₂ concentration of 20 vol%. Meanwhile, a high CO₂ fixation yield of 106.03 mg·L^-1 was reached. The presence of oxygen was adverse to the biofixation, indicating that strain PJ-1 was more suitable for CO₂ fixation in anaerobic environments. Carbon mass balance analysis revealed that the carbon from CO₂ was mainly fixed into the extracellular organic carbon rather than the biomass. GC-MS analysis and cbbL gene test revealed that Paracoccus denitrificans PJ-1 fixed CO₂ through the Calvin-Benson-Bassham cycle and mainly converted CO₂ to oxalic acid and succinic acid. Overall, the excellent CO₂ fixation capacity of Paracoccus denitrificans PJ-1 suggests that it had potential for CO₂ utilization.

A 3D porous NCNT sponge anode modified with chitosan and Polyaniline for high-performance microbial fuel cell

A microbial fuel cell (MFC) is a potential bio-electrochemical technology that utilizes microorganisms to convert chemical energy into electrical energy. The low power output of MFCs remain the bottleneck for their practical applications. In this paper, a novel, biocompatible and bioelectrocatalytic composite chitosan-nitrogen doped carbon nanotubes-polyaniline (CS-NCNT-PANI) was prepared in situ on the 3D porous NCNT/sponge and applied to an MFC anode. The PANI was grafted on the CS-NCNT backbone to synthesize the ternary composite. This bioanode not only increased the active surface area and capacity but also facilitated bacterial adhesion and enrichment of microbes. Compared with the NCNT/sponge electrode, the charge transfer impedance of the ternary composite bioanode decreased from 14.07 Ω to 2.25 Ω, and the maximum power density increased from 1.4 W·m^-3 to 4.2 W·m^-3; meanwhile, during the chronoamperometric experiment with a charge-discharge time of 60-60 min, the cumulative charge of the composite bioanode was 18,865.8 C·m^-2, which is much higher than that of the NCNT/S anode (3625.3 C·m^-2). High-throughput sequencing technology revealed that the ternary composite bioanode had good biocompatibility and high diversity. Therefore, this synthesized ternary composite is a promising candidate as a capacitive and biocompatible anode material in MFC.

Shear Stress Affects Biofilm Structure and Consequently Current Generation of Bioanode in Microbial Electrochemical Systems (MESs)

Shear stress is an important factor that affects the formation and structure of anode biofilms, which are strongly related to the extracellular electron transfer phenomena and bioelectric performance of bioanodes. Here, we show that using nitrogen sparging to induce shear stress during anode biofilm formation increases the linear sweep voltammetry peak current density of the mature anode biofilm from 2.37 ± 0.15 to 4.05 ± 0.25 A/m². Electrochemical impedance spectroscopy results revealed that the shear-stress-enriched anode biofilm had a low charge transfer resistance of 46.34 Ω compared to that of the unperturbed enriched anode biofilm (72.2 Ω). Confocal laser scanning microscopy observations showed that the shear-stress-enriched biofilms were entirely viable, whereas the unperturbed enriched anode biofilm consisted of a live outer layer covering a dead inner-core layer. Based on biomass and community analyses, the shear-stress-enriched biofilm had four times the biofilm density (136.0 vs. 27.50 μg DNA/cm³) and twice the relative abundance of Geobacteraceae (over 80 vs. 40%) in comparison with those of the unperturbed enriched anode biofilm. These results show that applying high shear stress during anode biofilm enrichment can result in an entirely viable and dense biofilm with a high relative abundance of exoelectrogens and, consequently, better performance.

Electricigens in the anode of microbial fuel cells: pure cultures versus mixed communities

Microbial fuel cell (MFC) is an environmentally friendly technology for electricity harvesting from a variety of substrates. Microorganisms used as catalysts in the anodic chamber, which are termed as electricigens, play a major role in the operation of MFCs. This review provides an introduction to the currently identified electricigens on their taxonomical groups and electricity producing abilities. The mechanism of electron transfer from electricigens to electrode is highlighted. The performances of pure culture and mixed communities are compared particularly. It has been proved that the electricity generation capacity and the ability to adapt to the complex environment of MFC systems constructed by pure microbial cultures are less than the systems constructed by miscellaneous consortia. However, pure cultures are useful to clarify the electron transfer mechanism at the microbiological level and further reduce the complexity of mixed communities. Future research trends of electricigens in MFCs should be focused on screening, domestication, modification and optimization of multi-strains to improve their electrochemical activities. Although the MFC techniques have been greatly advanced during the past few years, the present state of this technology still requires to be combined with other processes for cost reduction.

New insights in photosynthetic microbial fuel cell using anoxygenic phototrophic bacteria

Anoxygenic phototrophic bacteria (APB) pay a key role in biogeochemical cycles, and it can convert light energy to chemical energy by photosynthesis process. Photosynthetic microbial fuel cell (photo-MFC) is regarded as a promising energy-harvesting technology, which is also applied to environment treatment in recent years. The previous studies show that photo-MFC with APB have higher power putout than other bioelectrochemical systems. However, photo-MFC with APB is not reviewed due to some limited factors in the development process. In this review, photo-MFC with APB is treated according to its electron transfer pathways, the current understanding, APB strains, application, influence of substrates, and economic assessment. Meanwhile, knowledge of photosynthesis components and electron transfer pathways of APB is crucial for developing new energy and easing the serious energy crisis. Moreover, some new insights (the optimization of light source and self-sustaining bioelectricity generation) are proposed for the future explorations.