Thermo-responsive microcarriers based on poly(N-isopropylacrylamide)

Strong Elastic Protein Nanosheets Enable the Culture and Differentiation of Induced Pluripotent Stem Cells on Microdroplets

Advances in stem cell technologies, revolutionizing regenerative therapies and advanced in vitro testing, require novel cell manufacturing pipelines able to cope with scale up and parallelization. Microdroplet technologies, which have transformed single cell sequencing and other cell-based assays, are attractive in this context, but the inherent soft mechanics of liquid-liquid interfaces is typically thought to be incompatible with the expansion of induced pluripotent stem cells (iPSCs), and their differentiation. In this work, the design of protein nanosheets stabilizing liquid-liquid interfaces and enabling the adhesion, expansion and retention of stemness by iPSCs is reported. Microdroplet microfluidic chips are used to control the formulation of droplets with defined dimensions and size distributions. The resulting emulsions sustain high expansion rates, with excellent retention of stem cell marker expression. iPSCs cultured in such conditions retain the capacity to differentiate into cardiomyocytes. This work provides clear evidence that local nanoscale mechanics, associated with interfacial viscoelasticity, provides strong cues able to regulate and maintain pluripotency, as well as to support commitment in defined differentiation conditions. Microdroplet technologies appear as attractive candidates to transform cell manufacturing pipelines, bypassing significant hurdles paused by solid substrates and microcarriers.

Smart/stimuli-responsive chitosan/gelatin and other polymeric macromolecules natural hydrogels vs. synthetic hydrogels systems for brain tissue engineering: A state-of-the-art review

Currently, there are no viable curative treatments that can enhance the central nervous system's (CNS) recovery from trauma or illness. Bioengineered injectable smart/stimuli-responsive hydrogels (SSRHs) that mirror the intricacy of the CNS milieu and architecture have been suggested as a way to get around these restrictions in combination with medication and cell therapy. Additionally, the right biophysical and pharmacological stimuli are required to boost meaningful CNS regeneration. Recent research has focused heavily on developing SSRHs as cutting-edge delivery systems that can direct the regeneration of brain tissue. In the present article, we have discussed the pathology of brain injuries, and the applicable strategies employed to regenerate the brain tissues. Moreover, the most promising SSRHs for neural tissue engineering (TE) including alginate (Alg.), hyaluronic acid (HA), chitosan (CH), gelatin, and collagen are used in natural polymer-based hydrogels and thoroughly discussed in this review. The ability of these hydrogels to distribute bioactive substances or cells in response to internal and external stimuli is highlighted with particular attention. In addition, this article provides a summary of the most cutting-edge techniques for CNS recovery employing SSRHs for several neurodegenerative diseases.

Smart alginate inks for tissue engineering applications

Amazing achievements have been made in the field of tissue engineering during the past decades. However, we have not yet seen fully functional human heart, liver, brain, or kidney tissue emerge from the clinics. The promise of tissue engineering is thus still not fully unleashed. This is mainly related to the challenges associated with producing tissue constructs with similar complexity as native tissue. Bioprinting is an innovative technology that has been used to obliterate these obstacles. Nevertheless, natural organs are highly dynamic and can change shape over time; this is part of their functional repertoire inside the body. 3D-bioprinted tissue constructs should likewise adapt to their surrounding environment and not remain static. For this reason, the new trend in the field is 4D bioprinting - a new method that delivers printed constructs that can evolve their shape and function over time. A key lack of methodology for printing approaches is the scalability, easy-to-print, and intelligent inks. Alginate plays a vital role in driving innovative progress in 3D and 4D bioprinting due to its exceptional properties, scalability, and versatility. Alginate's ability to support 3D and 4D printing methods positions it as a key material for fueling advancements in bioprinting across various applications, from tissue engineering to regenerative medicine and beyond. Here, we review the current progress in designing scalable alginate (Alg) bioinks for 3D and 4D bioprinting in a "dry"/air state. Our focus is primarily on tissue engineering, however, these next-generation materials could be used in the emerging fields of soft robotics, bioelectronics, and cyborganics.

Supramolecular Responsive Chitosan Microcarriers for Cell Detachment Triggered by Adamantane

Supramolecular responsive microcarriers based on chitosan microspheres were prepared and applied for nonenzymatic cell detachment. Briefly, chitosan microspheres (CSMs) were first prepared by an emulsion crosslinking approach, the surface of which was then modified with β-cyclodextrin (β-CD) by chemical grafting. Subsequently, gelatin was attached onto the surface of the CSMs via the host-guest interaction between β-CD groups and aromatic residues in gelatin. The resultant microspheres were denoted CSM-g-CD-Gel. Due to their superior biocompatibility and gelatin niches, CSM-g-CD-Gel microspheres can be used as effective microcarriers for cell attachment and expansion. L-02, a human fetal hepatocyte line, was used to evaluate cell attachment and expansion with these microcarriers. After incubation for 48 h, the cells attached and expanded to cover the entire surface of microcarriers. Moreover, with the addition of adamantane (AD), cells can be detached from the microcarriers together with gelatin because of the competitive binding between β-CD and AD. Overall, these supramolecular responsive microcarriers could effectively support cell expansion and achieve nonenzymatic cell detachment and may be potentially reusable with a new cycle of gelatin attachment and detachment.

Functionalized core-shell nanogel scavenger for immune modulation therapy in sepsis

Sepsis is a complex, life-threatening hyperinflammatory syndrome associated with organ failure and high mortality due to lack of effective treatment options. Here we report a core-shell hydrogel nanoparticle with the core functionalized with telodendrimer (TD) nanotrap (NT) to control hyperinflammation in sepsis. The combination of multi-valent charged and hydrophobic moieties in TD enables effective binding with biomolecules in NT. The higher crosslinking in the shell structure of nanogel excludes the abundant large serum proteins and allows for size-selectivity in scavenging the medium-sized septic molecules (10-30 kDa), e.g., lipopolysaccharides (LPS, a potent endotoxin in sepsis), thus reducing cytokine production. At the same time, the core-shell TD NT nanogel captures the over-flowing proinflammatory cytokines effectively both in vitro and in vivo from biological fluids to further control hyperinflammation. Intraperitoneal injection of core-shell TD NT nanogel effectively attenuates NF-κB activation and cytokine production in LPS-induced septic mouse models. These results indicate the potential applications of the injectable TD NT core-shell nanogel to attenuate local or systemic inflammation.

Validation and scalability of homemade polycaprolactone macro-beads grafted with thermo-responsive poly (N-isopropyl acrylamide) for mesenchymal stem cell expansion and harvesting

In this study, polycaprolactone (PCL) macro-beads were prepared by an oil-in-water (o/w) emulsion solvent evaporation method with poly (vinyl alcohol) (PVA) as an emulsifier and conjugated to poly (N-isopropyl acrylamide) (PNIPAAm) to be used as cell carriers with non-invasive cell detachment properties (thermo-response). Following previous studies with PCL-PNIPAAm carriers, our objectives were to confirm the successful conjugation on homemade macro-beads and to show the advantages of homemade production over commercial beads to control morphological, biological and fluidization properties. The effects of PCL concentration on the droplet formation and of flow rate and PVA concentration on the size of the beads were demonstrated. The size of the beads, all spherical, ranged from 0.5 mm to 3.7 mm with four bead categories based on production parameters. The morphology and size of the beads were observed by scanning electron microscopy to show surface roughness enhancing cell attachment and proliferation compared to commercial beads. The functionalization steps with PNIPAAm were then characterized and confirmed by Fourier transform infrared spectroscopy (FTIR), SEM and Energy Dispersion Spectroscopy (EDS). PNIPAAm-grafted macro-beads allowed mesenchymal stem cells (MSC) to spread and grow for up to 21 days. By reducing the temperature to 25 °C, the MSCs were successfully detached from the PCL-PNIPAAm beads as observed with fluorescence microscopy. Furthermore, we validated the scalability potential of both macro-beads production and conjugation with PCL, in order to produce easily kilograms of thermo-responsive macro-carriers in a lab environment. This could help moving such approaches towards clinically and industrially relevant processes were cell expansion is needed at very large scale. This article is protected by copyright. All rights reserved.

Cutting-Edge Progress in Stimuli-Responsive Bioadhesives: From Synthesis to Clinical Applications

With the advent of “intelligent” materials, the design of smart bioadhesives responding to chemical, physical, or biological stimuli has been widely developed in biomedical applications to minimize the risk of wounds reopening, chronic pain, and inflammation. Intelligent bioadhesives are free-flowing liquid solutions passing through a phase shift in the physiological environment due to stimuli such as light, temperature, pH, and electric field. They possess great merits, such as ease to access and the ability to sustained release as well as the spatial transfer of a biomolecule with reduced side effects. Tissue engineering, wound healing, drug delivery, regenerative biomedicine, cancer therapy, and other fields have benefited from smart bioadhesives. Recently, many disciplinary attempts have been performed to promote the functionality of smart bioadhesives and discover innovative compositions. However, according to our knowledge, the development of multifunctional bioadhesives for various biomedical applications has not been adequately explored. This review aims to summarize the most recent cutting-edge strategies (years 2015–2021) developed for stimuli-sensitive bioadhesives responding to external stimuli. We first focus on five primary categories of stimuli-responsive bioadhesive systems (pH, thermal, light, electric field, and biomolecules), their properties, and limitations. Following the introduction of principal criteria for smart bioadhesives, their performances are discussed, and certain smart polymeric materials employed in their creation in 2015 are studied. Finally, advantages, disadvantages, and future directions regarding smart bioadhesives for biomedical applications are surveyed.

Effect of Non-Covalent Interactions on the 2,4- and 3,5-Dinitrobenzoate Eu-Cd Complex Structures

Heterometallic {Eu2Cd2} complexes [Eu2(NO3)2Cd2(Phen)2(2,4-Nbz)8]n·2nMeCN (I) and [Eu2(MeCN)2Cd2(Phen)2(3,5-Nbz)10] (II) with the 2,4-dinitrobenzoate (2,4-Nbz) and 3,5-dinitrobenzoate (3,5-Nbz) anions and 1,10-phenanthroline were synthesized. The compounds obtained were characterized by X-ray single-crystal analysis, powder X-ray diffraction analysis, IR spectroscopy, and elemental analysis. Moreover, the thermal stability of the complexes was also studied. Analysis of the crystal packing showed that where 1,10-phenanthroline is combined with various isomers of dinitrobenzoate anions, different arrangements of non-covalent interactions are observed in the complex structures. In the case of the compound with the 2,4-dinitrobenzoate anion, these interactions lead to a significant distortion of the metal core geometry and formation of a polymeric structure, while the complex with the 3,5-dinitrobenzoate anion has a structure that is typical of similar systems. The absence of europium metal-centered luminescence at 270 nm wavelength was shown. For all the reported compounds, a thermal stability study was carried out that showed that the compounds decomposed with a significant thermal effect.

New Insights of Scaffolds Based on Hydrogels in Tissue Engineering

In recent years, biomaterials development and characterization for new applications in regenerative medicine or controlled release represent one of the biggest challenges. Tissue engineering is one of the most intensively studied domain where hydrogels are considered optimum applications in the biomedical field. The delicate nature of hydrogels and their low mechanical strength limit their exploitation in tissue engineering. Hence, developing new, stronger, and more stable hydrogels with increased biocompatibility, is essential. However, both natural and synthetic polymers possess many limitations. Hydrogels based on natural polymers offer particularly high biocompatibility and biodegradability, low immunogenicity, excellent cytocompatibility, variable, and controllable solubility. At the same time, they have poor mechanical properties, high production costs, and low reproducibility. Synthetic polymers come to their aid through superior mechanical strength, high reproducibility, reduced costs, and the ability to regulate their composition to improve processes such as hydrolysis or biodegradation over variable periods. The development of hydrogels based on mixtures of synthetic and natural polymers can lead to the optimization of their properties to obtain ideal scaffolds. Also, incorporating different nanoparticles can improve the hydrogel’s stability and obtain several biological effects. In this regard, essential oils and drug molecules facilitate the desired biological effect or even produce a synergistic effect. This study’s main purpose is to establish the main properties needed to develop sustainable polymeric scaffolds. These scaffolds can be applied in tissue engineering to improve the tissue regeneration process without producing other side effects to the environment.

Multifunctional Thermoresponsive Microcarriers for High-Throughput Cell Culture and Enzyme-Free Cell Harvesting

An effective treatment of human diseases using regenerative medicine and cell therapy approaches requires a large number of cells. Cultivation of cells on microcarriers is a promising approach due to the high surface-to-volume ratios that these microcarriers offer. Here, multifunctional temperature-responsive microcarriers (cytoGel) made of an interpenetrating hydrogel network composed of poly(N-isopropylacrylamide) (PNIPAM), poly(ethylene glycol) diacrylate (PEGDA), and gelatin methacryloyl (GelMA) are developed. A flow-focusing microfluidic chip is used to produce microcarriers with diameters in the range of 100-300 μm and uniform size distribution (polydispersity index of ≈0.08). The mechanical properties and cells adhesion properties of cytoGel are adjusted by changing the composition hydrogel composition. Notably, GelMA regulates the temperature response and enhances microcarrier stiffness. Human-derived glioma cells (U87) are grown on cytoGel in static and dynamic culture conditions with cell viabilities greater than 90%. Enzyme-free cell detachment is achieved at room temperature with up to 70% detachment efficiency. Controlled release of bioactive molecules from cytoGel is accomplished for over a week to showcase the potential use of microcarriers for localized delivery of growth factors to cell surfaces. These microcarriers hold great promise for the efficient expansion of cells for the industrial-scale culture of therapeutic cells.

A Review of the Use of Microparticles for Cartilage Tissue Engineering

Tissue and organ failure has induced immense economic and healthcare concerns across the world. Tissue engineering is an interdisciplinary biomedical approach which aims to address the issues intrinsic to organ donation by providing an alternative strategy to tissue and organ transplantation. This review is specifically focused on cartilage tissue. Cartilage defects cannot readily regenerate, and thus research into tissue engineering approaches is relevant as a potential treatment option. Cells, scaffolds, and growth factors are three components that can be utilized to regenerate new tissue, and in particular recent advances in microparticle technology have excellent potential to revolutionize cartilage tissue regeneration. First, microspheres can be used for drug delivery by injecting them into the cartilage tissue or joint space to reduce pain and stimulate regeneration. They can also be used as controlled release systems within tissue engineering constructs. Additionally, microcarriers can act as a surface for stem cells or chondrocytes to adhere to and expand, generating large amounts of cells, which are necessary for clinically relevant cell therapies. Finally, a newer application of microparticles is to form them together into granular hydrogels to act as scaffolds for tissue engineering or to use in bioprinting. Tissue engineering has the potential to revolutionize the space of cartilage regeneration, but additional research is needed to allow for clinical translation. Microparticles are a key enabling technology in this regard.

Nanocarriers for Biomedicine: From Lipid Formulations to Inorganic and Hybrid Nanoparticles

Encapsulation of cargoes in nanocontainers is widely used in different fields to solve the problems of their solubility, homogeneity, stability, protection from unwanted chemical and biological destructive effects, and functional activity improvement. This approach is of special importance in biomedicine, since this makes it possible to reduce the limitations of drug delivery related to the toxicity and side effects of therapeutics, their low bioavailability and biocompatibility. This review highlights current progress in the use of lipid systems to deliver active substances to the human body. Various lipid compositions modified with amphiphilic open-chain and macrocyclic compounds, peptide molecules and alternative target ligands are discussed. Liposome modification also evolves by creating new hybrid structures consisting of organic and inorganic parts. Such nanohybrid platforms include cerasomes, which are considered as alternative nanocarriers allowing to reduce inherent limitations of lipid nanoparticles. Compositions based on mesoporous silica are beginning to acquire no less relevance due to their unique features, such as advanced porous properties, well-proven drug delivery efficiency and their versatility for creating highly efficient nanomaterials. The types of silica nanoparticles, their efficacy in biomedical applications and hybrid inorganic-polymer platforms are the subject of discussion in this review, with current challenges emphasized.

Expansion of human mesenchymal stem/stromal cells on temporary liquid microcarriers

BACKGROUND

Traditional large-scale culture systems for human mesenchymal stem/stromal cells (hMSCs) use solid microcarriers as attachment substrates. Although the use of such substrates is advantageous because of the high surface-to-volume ratio, cell harvest from the same substrates is a challenge as it requires enzymatic treatment, often combined with agitation. Here, we investigated a two-phase system for expansion and non-enzymatic recovery of hMSCs. Perfluorocarbon droplets were dispersed in a protein-rich growth medium and were used as temporary liquid microcarriers for hMSC culture.

RESULTS

hMSCs successfully attached to these liquid microcarriers, exhibiting similar morphologies to those cultured on solid ones. Fold increases of 3.03 ± 0.98 (hMSC1) and 3.81 ± 0.29 (hMSC2) were achieved on day 9. However, the maximum expansion folds were recorded on day 4 (4.79 ± 0.47 (hMSC1) and 4.856 ± 0.7 (hMSC2)). This decrease was caused by cell aggregation upon reaching confluency due to the contraction of the interface between the two phases. Cell quality, as assessed by differentiation, cell surface marker expression and clonogenic ability, was retained post expansion on the liquid microcarriers. Cell harvesting was achieved non-enzymatically in two steps: first by inducing droplet coalescence and then aspirating the interface. Quality characteristics of hMSCs continued to be retained even after inducing droplet coalescence.

CONCLUSION

The prospect of a temporary microcarrier that can be used to expand cells and then 'disappear' for cell release without using proteolytic enzymes is a very exciting one. Here, we have demonstrated that hMSCs can attach and proliferate on these perfluorocarbon liquid microcarriers while, very importantly, retaining their quality.

Enhanced and long-term CT imaging tracking of transplanted stem cells labeled with temperature-responsive gold nanoparticles

Gold nanoparticles (AuNPs) have been extensively employed for computed tomography (CT) imaging in cell labeling and tracking because of their strong X-ray attenuation coefficient and excellent biocompatibility. However, the design and synthesis of stimuli-responsive AuNPs to modulate their endocytosis and exocytosis for optimal cell labeling and tracking are promising but challenging. Herein, we report an innovative labeling strategy based on temperature-responsive AuNPs (TRAuNPs) with high cell labeling efficiency and extended intracellular retention duration. We have manifested that the TRAuNP labeling imposes a negligible adverse effect on the function of human mesenchymal stem cells (hMSCs). Further experiment with idiopathic pulmonary fibrosis (IPF) model mice has demonstrated the feasibility of TRAuNP labeling for long time CT imaging tracking of transplanted hMSCs. What's more, the survival of transplanted hMSCs could also be monitored simultaneously using bioluminescence imaging after the expression of luciferase reporter genes. Therefore, we believe that this dual-modal labeling and tracking strategy enables visualization of the transplanted hMSCs in vivo, which may provide an important insight into the role of stem cells in the IPF therapy.

Fabrication and characterization of thermoresponsive composite carriers: PNIPAAm-grafted glass spheres

Processing capacity and product yield of three-dimensional (3D) smart responsive carriers are markedly superior to those of two-dimensional substrates with the same compositions due to the special structure; therefore, more attempts have been made to develop the 3D intelligent systems in recent decades. A novel preparation strategy of thermoresponsive glass sphere-based composite carriers was reported in this study. First, PNIPAAm copolymers were synthesized by free-radical polymerization of N-isopropylacrylamide (NIPAAm), hydroxypropyl methacrylate (HPM), and 3-trimethoxysilypropyl methacrylate (TMSPM). Then, the copolymer solution was sprayed on the surfaces of glass spheres using a self-made bottom-spray fluidized bed reactor, and the bonding between copolymers and glass spheres was fabricated by thermal annealing to form PNIPAAm copolymer/glass sphere composite carriers. The coating effects of PNIPAAm copolymers on sphere surfaces were investigated, including characteristic functional groups, surface microstructure, grafting density, equilibrium swelling, as well as biocompatibility and potential application for cell culture. The results show that the temperature-responsive PNIPAAm copolymers can be linked to the surfaces of glass spheres by bottom-spray coating technology, and the copolymer layers can be formed on the sphere surfaces. The composite carriers have excellent thermosensitivity and favorable biocompatibility, and they are available for effective cell adhesion and spontaneous cell detachment by the use of smart responsiveness.

Poly(N-isopropylacrylamide)/galactomannan from Delonix regia seed thermal responsive graft copolymer via Schiff base reaction

Aminated poly(N-isopropylacrylamide) (PNIPAm-NH₂) was grafted onto oxidized galactomannan polysaccharide extracted from Delonix regia (OXGM) via Schiff base reaction by a simple, rapid synthetic route, deprived of the use of organic solvents. Grafting was confirmed by FTIR and ¹H NMR and the self-organizing ability of the obtained nanoparticle copolymers was investigated by dynamic light scattering (DLS). The minimum concentration required for self-organization (CAC) at 25 °C was higher than at 50 °C. Lower critical solution temperature (LCST) was in the range 34-40 °C, depending on both inserted PNIPAm-NH₂ molar mass and on the presence of reduced imine bond. Synthesized copolymers are promising candidates for drug delivery as they show good cell viability, particle size around 250 nm and transition temperature closer to that of human body. Reaction success points out to the possibility of use free aldehyde groups of oxidized polysaccharide, not used in the copolymerization, to form a pro-drug with substances that possess NH₂ groups in their structure, such as doxorubicin.

Readily Adsorbable Thermoresponsive Polymers for the Preparation of Smart Cell-Culturing Surfaces on Site

The efficacy of several cell therapy products is directly impacted by trypsinization, which can diminish the engrafting capacity of transplanted cells by cleaving cell surface receptors. Thermoresponsive surfaces can alleviate this drawback, enabling temperature-driven and enzyme-free cell harvesting. However, the production of thermoresponsive surfaces relies on dedicated and complex equipment, often involving protocols dependent on high surface activation energies that prevent the development of scalable and universal platforms. In this work, we developed thermoresponsive copolymers incorporating styrene units that enable the copolymer adsorption on tissue culture polystyrene surfaces from an alcoholic solution in a short time, regardless of the vessel size and geometry, and without any particular equipment. In this way, the procedure can be performed with minimal effort by the end user on any surface. The thermoresponsive copolymers were synthesized via reversible addition-fragmentation chain transfer polymerization, providing high control over the polymer microstructure, a key parameter for tuning its cloud point and architecture. Block copolymers comprising a thermoresponsive segment and a polystyrene block exhibited optimal adhesion on conventional cell culture surfaces and permitted a more efficient temperature-mediated harvesting of adipose-derived stromal cells and Chinese hamster ovary cells compared to their statistical counterparts. To expand the application of this polymer deposition protocol to serum-free cell culture, we also considered the polymer modification with the tripeptide arginine-glycine-aspartic acid, known to promote the cell adhesion to synthetic substrates. The incorporation of this peptide enabled the collection in serum-free conditions of intact cell sheets from surfaces prepared shortly before their usage.

Thermoresponsive Poly(2-propyl-2-oxazoline) Surfaces of Glass for Nonenzymatic Cell Harvesting

As one of the nonenzymatic cell-harvesting technologies, a thermal-responsive surface based on poly(2-oxazoline)s has achieved initial success in supporting the adhesion and thermal-induced detachment of animal cells. However, because of the laborious preparation procedure, this technique was only limited to research purposes. In this work, through using poly(glycidyl methacrylate) (PGMA) as the anchor layer, poly(2-propyl-2-oxazoline)s (PPOx) were grafted onto glass wafers through a facile two-step coating and annealing procedure for nonenzymatic cell harvesting. In the first step, the piranha solution-activated glass wafers were immersed into the chloroform solution of PGMA and then annealed for a given period of time to immobilize PGMA onto the glass wafers through the bonding between epoxy groups and hydroxyl groups. In the second step, the PGMA-coated glass wafers were further immersed into the chloroform solution of carboxyl-functionalized PPOx. After annealing, PPOx were immobilized onto the PGMA layer through the bonding between carboxyl groups and the residual epoxy groups. Atomic force microscopy, X-ray photoelectron spectroscopy, and ellipsometry were used to characterize the modified glass wafers. The results of cytocompatibility evaluation showed that the PPOx-coated glass wafers were almost nontoxic and were able to support the adhesion and proliferation of L929 cells well. By lowering the temperature to 8 °C, L929 and Vero cells were successfully detached from the PPOx-coated glass wafers without any enzymatic treatment. Further cultivation has demonstrated that the cooling procedure had little effect on cell viability, and the cells still retained good viability after harvesting.

Smart Hydrogels - Synthetic Stimuli-Responsive Antitumor Drug Release Systems

Among modern drug formulations, stimuli-responsive hydrogels also called "smart hydrogels" deserve a special attention. The basic feature of this system is the ability to change their mechanical properties, swelling ability, hydrophilicity, bioactive molecules permeability, etc., influenced by various stimuli, such as temperature, pH, electromagnetic radiation, magnetic field and biological factors. Therefore, stimuli-responsive matrices can be potentially used in tissue engineering, cell cultures and technology of innovative drug delivery systems (DDSs), releasing the active substances under the control of internal or external stimuli. Moreover, smart hydrogels can be used as injectable DDSs, due to gel-sol transition connected with in situ cross-linking process. Innovative smart hydrogel DDSs can be utilized as matrices for targeted therapy, which enhances the effectiveness of tumor chemotherapy and subsequently limits systemic toxicity. External stimulus sensitivity allows remote control over the drug release profile and gel formation. On the other hand, internal factors provide drg accumulation in tumor tissue and reduce the concentration of active drug form in healthy tissue. In this report, we summarise the basic knowledge and chemical strategies for the synthetic smart hydrogel DDSs applied in antitumor therapy.

Preparation and Characterization of Thermoresponsive Poly(N-Isopropylacrylamide) for Cell Culture Applications

Poly(N-isopropylacrylamide) (PNIPAAm) is a typical thermoresponsive polymer used widely and studied deeply in smart materials, which is attractive and valuable owing to its reversible and remote "on-off" behavior adjusted by temperature variation. PNIPAAm usually exhibits opposite solubility or wettability across lower critical solution temperature (LCST), and it is readily functionalized making it available in extensive applications. Cell culture is one of the most prospective and representative applications. Active attachment and spontaneous detachment of targeted cells are easily tunable by surface wettability changes and volume phase transitions of PNIPAAm modified substrates with respect to ambient temperature. The thermoresponsive culture platforms and matching thermal-liftoff method can effectively substitute for the traditional cell harvesting ways like enzymatic hydrolysis and mechanical scraping, and will improve the stable and high quality of recovered cells. Therefore, the establishment and detection on PNIPAAm based culture systems are of particular importance. This review covers the important developments and recommendations for future work of the preparation and characterization of temperature-responsive substrates based on PNIPAAm and analogues for cell culture applications.

Reduction-responsive molecularly imprinted nanogels for drug delivery applications

Degradable molecularly imprinted polymers (MIPs) with affinity for S-propranolol were prepared by the copolymerization of methacrylic acid as functional monomer and a disulfide-containing cross-linker, bis(2-methacryloyloxyethyl)disulfide (DSDMA), using bulk polymerization or high dilution polymerization for nanogels synthesis. The specificity and the selectivity of DSDMA-based molecularly imprinted polymers toward S-propranolol were studied in batch binding experiments, and their binding properties were compared to a traditional ethylene glycol dimethacrylate (EDMA)-based MIP. Nanosized MIPs prepared with DSDMA as crosslinker could be degraded into lower molecular weight linear polymers by cleaving the disulfide bonds and thus reversing cross-linking using different reducing agents (NaBH4, DTT, GSH). Turbidity, viscosity, polymer size and IR-spectra were measured to study the polymer degradation. The loss of specific recognition and binding capacity of S-propranolol was also observed after MIP degradation. This phenomenon was applied to modulate the release properties of the MIP. In presence of GSH at its intracellular concentration, the S-propranolol release was higher, showing that these materials could potentially be applied as intracellular controlled drug delivery system.

Facile design and development of photoluminescent graphene quantum dots grafted dextran/glycol-polymeric hydrogel for thermoresponsive triggered delivery of buprenorphine on pain management in tissue implantation

A novel nano-formulations of biocompatible, biodegradable and thermo-responsive graphene quantum dots (GQDs) loaded dextran/poly(N-isopropylacrylamide) (Dex/PNIPAM) copolymeric matrix was synthesized and analyzed the materials characterization, sustained drug delivery system, tissue feasibility in the tissue implantation site. This research report was aimed to grafting and functionalizing thermo-responsive (Dex/PNIPAM) copolymeric composite with presence of graphene quantum dots to achieve thermal responsive drug delivery (TrDD) with no harm effect in the implantation site. The synthesized GQD by using ionic liquid were evaluated by spectroscopic (DLS, PL, XRD and Raman spectroscopy) and Transmission electron microscopic analysis (TEM). The ultra-small GQDs loaded Dex/PNIPAM and was appeared to be asymmetric and open uniform porous structure, which can be significantly favorable for cell uptake and greatly influenced to be an effective drug carrier into the cellular compartment with good fluid flow. The PNIPAM polymeric composite were exhibited sustained and enhanced drug release percentages with increasing temperature at above low critical solution temperature (LCST) is 39 °C comparable to the cumulative drug release profile of below LCST (32 °C), which demonstrated that thermo-responsive polymer was played a significant role in the delivery system. The treated group of GQDs-Dex/PNIPAM was observed that no inflammation and shows noteworthy stromal cell infiltration, demonstrating that the synthesized drug carriers did not harm to the nerves and tissues and only was responsible for the pain management.

Development of thermo-responsive polycaprolactone macrocarriers conjugated with Poly(N-isopropyl acrylamide) for cell culture

Poly(N-isopropyl acrylamide) (PNIPAAm) is a well-known 'smart' material responding to external stimuli such as temperature. PNIPAAm was successfully conjugated to polycaprolactone (PCL) bead surfaces through amidation reaction. Functionalization steps were characterized and confirmed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and Energy Dispersion Spectroscopy. PNIPAAm-conjugated PCL allowed human dermal fibroblast cells (HDF) and mesenchymal stem cells (MSC) to adhere, spread, and grow successfully. By reducing the temperature to 30 °C, more than 70% of HDF were detached from PNIPAAm-conjugated PCL macrocarriers with 85% viability. The cell detachment ratio by trypsin treatment was slightly higher than that induced by reduced temperature, however, cell detachment from PNIPAAm-conjugated macrocarriers by lowering the temperature significantly reduced cell death and increased both cell viability and the recovery potential of the detached cells. HDF attachment and detachment were also observed by Live-Dead staining and phase contrast imaging. The expression of extracellular matrix proteins such as Laminin and Fibronectin was also affected by the trypsinization process but not by the reduced temperature process. Taken together, our results showed that thermo-responsive macrocarriers could be a promising alternative method for the non-invasive detachment of cells, in particular for tissue engineering, clinical applications and the use of bioreactors.

Addressing the Manufacturing Challenges of Cell-Based Therapies

Exciting developments in the cell therapy field over the last decades have led to an increasing number of clinical trials and the first cell products receiving marketing authorization. In spite of substantial progress in the field, manufacturing of cell-based therapies presents multiple challenges that need to be addressed in order to assure the development of safe, efficacious, and cost-effective cell therapies.The manufacturing process of cell-based therapies generally requires tissue collection, cell isolation, culture and expansion (upstream processing), cell harvest, separation and purification (downstream processing), and, finally, product formulation and storage. Each one of these stages presents significant challenges that have been the focus of study over the years, leading to innovative and groundbreaking technological advances, as discussed throughout this chapter.Delivery of cell-based therapies relies on defining product targets while controlling process variable impact on cellular features. Moreover, commercial viability is a critical issue that has had damaging consequences for some therapies. Implementation of cost-effectiveness measures facilitates healthy process development, potentially being able to influence end product pricing.Although cell-based therapies represent a new level in bioprocessing complexity in every manufacturing stage, they also show unprecedented levels of therapeutic potential, already radically changing the landscape of medical care.

Investigation of abnormal thermoresponsive PVDF membranes on casting solution, membrane morphology and filtration performance

A temperature sensitive casting solution of P(OEGMA-co-VTMOS) was prepared via an in situ polymerization method. Meanwhile, an interesting thermoresponsive PVDF membrane was obtained from the temperature sensitive casting solution.