Crystallization, orientation, and mechanical properties of laser-heated photothermally drawn polypropylene/multi-walled carbon nanotube fibers

Hybrid Carbon Nanotubes-Graphene Nanostructures: Modeling, Formation, Characterization

A technology for the formation and bonding with a substrate of hybrid carbon nanostructures from single-walled carbon nanotubes (SWCNT) and reduced graphene oxide (rGO) by laser radiation is proposed. Molecular dynamics modeling by the real-time time-dependent density functional tight-binding (TD-DFTB) method made it possible to reveal the mechanism of field emission centers formation in carbon nanostructures layers. Laser radiation stimulates the formation of graphene-nanotube covalent contacts and also induces a dipole moment of hybrid nanostructures, which ensures their orientation along the force lines of the radiation field. The main mechanical and emission characteristics of the formed hybrid nanostructures were determined. By Raman spectroscopy, the effect of laser radiation energy on the defectiveness of all types of layers formed from nanostructures was determined. Laser exposure increased the hardness of all samples more than twice. Maximum hardness was obtained for hybrid nanostructure with a buffer layer (bl) of rGO and the main layer of SWCNT-rGO(bl)-SWCNT and was 54.4 GPa. In addition, the adhesion of rGO to the substrate and electron transport between the substrate and rGO(bl)-SWCNT increased. The rGO(bl)-SWCNT cathode with an area of ~1 mm² showed a field emission current density of 562 mA/cm² and stability for 9 h at a current of 1 mA. The developed technology for the formation of hybrid nanostructures can be used both to create high-performance and stable field emission cathodes and in other applications where nanomaterials coating with good adhesion, strength, and electrical conductivity is required.

Surface Response Analysis for the Optimization of Mechanical and Thermal Properties of Polypropylene Composite Drawn Fibers with Talc and Carbon Nanotubes

A large portion of the produced Polypropylene (PP) is used in the form of fibers. In this industrially oriented study, the development of composite PP drawn fibers was investigated. Two types of fillers were used (ultra-fine talc and single-wall carbon nanotubes). Optimization of the thermal and mechanical properties of the produced composite drawn fibers was performed, based on the Box-Behnken design of experiments method (surface response analysis). The effect of additives, other than the filler, but typical in industrial applications, such as an antioxidant and a common compatibilizer, was investigated. The drawing ratio, the filler, and the compatibilizer or the antioxidant content were selected as design variables, whereas the tensile strength and the onset decomposition temperature were set as response variables. Fibers with very high tensile strength (up to 806 MPa) were obtained. The results revealed that the maximization of both the tensile strength and the thermal stability was not feasible for composites with talc due to multiple interactions among the used additives (antioxidant, compatibilizer, and filler). Additionally, it was found that the addition of talc in the studied particle size improved the mechanical strength of fibers only if low drawing ratios were used. On the other hand, the optimization targeting maximization of both tensile strength and thermal stability was feasible in the case of SWCNT composite fibers. It was found that the addition of carbon nanotubes improved the tensile strength; however, such improvement was rather small compared with the tremendous increase of tensile strength due to drawing.

Optimization of Thermal and Mechanical Properties of Polypropylene-Wollastonite Composite Drawn Fibers Based on Surface Response Analysis

The thermal and mechanical properties of polypropylene-wollastonite composite drawn fibers were optimized via experiments selected with the Box-Behnken approach. The drawing ratio, the filler and the compatibilizer content were chosen as design variables, while the tensile strength, the melting enthalpy and the onset decomposition temperature were set as response variables. Drawn fibers with tensile strength up to 535 MPa were obtained. Results revealed that the drawing ratio is the most important factor for the enhancement of tensile strength, followed by the filler content. All the design variables slightly affected the melting temperature and the crystallinity of the matrix. Also, it was found that the addition of polypropylene grafted with maleic anhydride as compatibilizer has a multiple effect on the final properties, i.e., it induces the dispersion of both the antioxidant and the filler, tending to increase thermal stability and tensile strength, while, on the same time, deteriorates mechanical and thermal properties due to its lower molecular weight and thermal stability. Such behavior does not allow for simultaneous maximization of thermal stability and tensile strength. Optimization based on a compromise, i.e., targeting maximization of tensile strength and onset decomposition temperature higher than 300 °C, yields high desirability values and predictions in excellent agreement with verification experiments.

Rapid and Local Self-Healing Ability of Polyurethane Nanocomposites Using Photothermal Polydopamine-Coated Graphene Oxide Triggered by Near-Infrared Laser

In this study, we report the self-healing ability of polyurethane (PU) nanocomposites based on the photothermal effect of polydopamine-coated graphene oxide (PDA-rGO). Polydopamine (PDA) was coated on the graphene oxide (GO) surface, while simultaneously reducing GO by the oxidation of dopamine hydrochloride in an alkaline aqueous solution. The PDA-rGO was characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, Raman spectroscopy, thermogravimetric analysis, and scanning electron microscopy-energy-dispersive X-ray analysis. PDA-rGO/PU nanocomposites with nanofiller contents of 0.1, 0.5 and 1 wt% were prepared by ex situ mixing method. The photothermal effect of the PDA-rGO in the PU matrix was investigated at 0.1 W/cm2 using an 808 nm near-infrared (NIR) laser. The photothermal properties of the PDA-rGO/PU nanocomposites were superior to those of the GO/PU nanocomposites, owing to an increase in the local surface plasmon resonance effect by coating with PDA. Subsequently, the self-healing efficiency was confirmed by recovering the tensile stress of the damaged nanocomposites using the thermal energy generated by the NIR laser.

From Molecular Reconstruction of Mesoscopic Functional Conductive Silk Fibrous Materials to Remote Respiration Monitoring

Turning insulating silk fibroin materials into conductive ones turns out to be the essential step toward achieving active silk flexible electronics. This work aims to acquire electrically conductive biocompatible fibers of regenerated Bombyx mori silk fibroin (SF) materials based on carbon nanotubes (CNTs) templated nucleation reconstruction of silk fibroin networks. The electronical conductivity of the reconstructed mesoscopic functional fibers can be tuned by the density of the incorporated CNTs. It follows that the hybrid fibers experience an abrupt increase in conductivity when exceeding the percolation threshold of CNTs >35 wt%, which leads to the highest conductivity of 638.9 S m^-1 among organic-carbon-based hybrid fibers, and 8 times higher than the best available materials of the similar types. In addition, the silk-CNT mesoscopic hybrid materials achieve some new functionalities, i.e., humidity-responsive conductivity, which is attributed to the coupling of the humidity inducing cyclic contraction of SFs and the conductivity of CNTs. The silk-CNT materials, as a type of biocompatible electronic functional fibrous material for pressure and electric response humidity sensing, are further fabricated into a smart facial mask to implement respiration condition monitoring for remote diagnosis and medication.

Ultrafast Photonic PCR Based on Photothermal Nanomaterials

Over the past few decades, PCR has been the gold standard for detecting nucleic acids (NAs) in various biomedical fields. However, there are several limitations associated with conventional PCR, such as complicated operation, need for bulky equipment, and, in particular, long thermocycling time. Emerging nanomaterials with photothermal effects have shown great potential for developing a new generation of PCR: ultrafast photonic PCR. Here, we review recent applications of photothermal nanomaterials in ultrafast photonic PCR. First, we introduce emerging photothermal nanomaterials and their light-to-heat energy conversion process in photonic PCR. We then review different photothermal nanomaterial-based photonic PCRs and compare their merits and drawbacks. Finally, we summarize existing challenges with photonic PCR and hypothesize its promising future research directions.

Photothermally-driven thermo-oxidative degradation of low density polyethylene: heterogeneous heating plus a complex reaction leads to homogeneous chemistry

Photothermal heating from embedded nanoparticles, a process whereby visible light is converted into heat resulting in a high temperature in each particle's immediate vicinity, was utilized to degrade low density polyethylene (LDPE) via thermo-oxidation. The spatially-varying steady-state photothermal temperature field is a potential mechanism by which ambient light (e.g. sunlight) could be used to drive chemical reactions within solid materials and may result in a non-uniform pattern of products, an advantage or disadvantage depending on application. Novel approaches to control polymer degradation are of interest because of the goal of remediating plastic waste, including autonomous means to minimize its effect when unconfined in the environment. For thermoplastic auto-oxidation, heterogeneous degradation would likely enhance deleterious micro-fragmentation however, the multi-step, multi-site nature of the reaction mitigated the temperature non-uniformity. A photothermally-heated LDPE nanocomposite with silver nanoparticle and cobalt-stearate additives showed degradation, characterized by ultraviolet-visible and Fourier-transform infrared absorption spectroscopy, electron microscopy, and mechanical testing, nearly identical to that resulting from uniform conventional treatment at the same average temperature.

The Role of Multiwalled Carbon Nanotubes in the Mechanical, Thermal, Rheological, and Electrical Properties of PP/PLA/MWCNTs Nanocomposites

Polypropylene/polylactic acid (PP/PLA) blend (10–40% of PLA) and PP/PLA/MWCNTs nanocomposites (0.5, 1, and 2 wt% of MWCNTs) were prepared via melt compounding. Scanning electron microscopy revealed a co-continuous PLA phase in the PP/PLA blends with high PLA content. Moreover, the addition of 2 wt% multi-walled carbon nanotubes (MWCNTs) increased the tensile modulus and tensile strength of the PP/PLA40% by 60% and 95%, respectively. A conductive network was found with the addition of 2 wt% MWCNTs, where the electrical conductivity of the PP/PLA increased by nine orders of magnitude. At 2 wt% MWCNTs, a solid network within the composite was characterized by rheological assessment, where the composite turned from nonterminal to terminal behavior. Soil burial testing of the PP/PLA blend within 30 days in natural humus compost soil featured suitable biodegradation, which indicates the PP/PLA blend is as an appropriate candidate for food packing applications.