Molecularly imprinted nanocapsule mimicking phosphotriesterase for the catalytic hydrolysis of organophosphorus pesticides

Designed Metal-Containing Peptoid Membranes as Enzyme Mimetics for Catalytic Organophosphate Degradation

The detoxification of lethal organophosphate (OP) residues in the environment is crucial to prevent human exposure and protect modern society. Despite serving as excellent catalysts for OP degradation, natural enzymes require costly preparation and readily deactivate upon exposure to environmental conditions. Herein, we designed and prepared a series of phosphotriesterase mimics based on stable, self-assembled peptoid membranes to overcome these limitations of the enzymes and effectively catalyze the hydrolysis of dimethyl p-nitrophenyl phosphate (DMNP)─a nerve agent simulant. By covalently attaching metal-binding ligands to peptoid N-termini, we attained enzyme mimetics in the form of surface-functionalized crystalline nanomembranes. These nanomembranes display a precisely controlled arrangement of coordinated metal ions, which resemble the active sites found in phosphotriesterases to promote DMNP hydrolysis. Moreover, using these highly programmable peptoid nanomembranes allows for tuning the local chemical environment of the coordinated metal ion to achieve enhanced hydrolysis activity. Among the crystalline membranes that are active for DMNP degradation, those assembled from peptoids containing bis-quinoline ligands with an adjacent phenyl side chain showed the highest hydrolytic activity with a 219-fold rate acceleration over the background, demonstrating the important role of the hydrophobic environment in proximity to the active sites. Furthermore, these membranes exhibited remarkable stability and were able to retain their catalytic activity after heating to 60 °C and after multiple uses. This work provides insights into the principal features to construct a new class of biomimetic materials with high catalytic efficiency, cost-effectiveness, and reusability applied in nerve agent detoxification.

In situ synthesis and dynamic simulation of molecularly imprinted polymeric nanoparticles on a micro-reactor system

Current practices in synthesizing molecularly imprinted polymers face challenges-lengthy process, low-productivity, the need for expensive and sophisticated equipment, and they cannot be controlled in situ synthesis. Herein, we present a micro-reactor for in situ and continuously synthesizing trillions of molecularly imprinted polymeric nanoparticles that contain molecular fingerprints of bovine serum albumin in a short period of time (5-30 min). Initially, we performed COMSOL simulation to analyze mixing efficiency with altering flow rates, and experimentally validated the platform for synthesizing nanoparticles with sizes ranging from 52-106 nm. Molecular interactions between monomers and protein were also examined by molecular docking and dynamics simulations. Afterwards, we benchmarked the micro-reactor parameters through dispersity and concentration of molecularly imprinted polymers using principal component analysis. Sensing assets of molecularly imprinted polymers were examined on a metamaterial sensor, resulting in 81% of precision with high selectivity (4.5 times), and three cycles of consecutive use. Overall, our micro-reactor stood out for its high productivity (48-288 times improvement in assay-time and 2 times improvement in reagent volume), enabling to produce 1.4-1.5 times more MIPs at one-single step, and continuous production compared to conventional strategy.

A general photoiniferter approach to the surface functionalization of acrylic and methacrylic structures written by two-photon stereolithography

Two-photon stereolithography (TPS) is an established additive fabrication technique allowing the voxel-by-voxel direct writing of even intricate 3D nano/microstructures via the polymerization of a photoresin. An obvious way to tune the chemical functionalities of such nano/microstructures is formulating a photoresin with the desired functional monomer(s). Unfortunately, this makes every photoresin "unique" in terms of viscosity and reactivity, thus requiring a tedious and often time-consuming optimization of its printing parameters. In this work, we describe a general approach for the chemical functionalization of TPS-written structures based on two commercial photoresins. Our strategy entailed the grafting of functional polymer layers via an innovative approach based on photoiniferter coupling to unreacted double bonds and photopolymerization. After writing woodpiles as 3D model structures, we demonstrated the viability of this approach by anchoring a photoiniferter via its photoinduced addition to the residual CC on the structure's surface triggered by green light. This in turn allowed for the blue light-mediated, surface-initiated photopolymerization of functional monomers. Molecularly imprinted polymer films were also easily synthesized by using the same approach on model honeycombs. The imprinted layers resulted in only a minimal increase in size with no effect on the geometrical features of the honeycombs. Overall, this strategy offers a general approach for the surface modification of TPS-written (meth)acrylic structures with a wide variety of functional polymers via photoiniferter polymerization.

Artificial phosphatase upon premicellar nanoarchitectonics of lanthanum complexes with long-chained imidazole derivatives

Four novel long chain-containing tridentate imidazole derivatives (Lⁿ, n = 1, 2, 3, 4) were synthesized for in situ formation of mononuclear lanthanum(III) complexes as artificial phosphodiesterases. These in-situ formed La(III) complexes (named LaLⁿ) were used to catalyze the transesterification of 2-hydroxypropyl p-nitrophenyl phosphate (HPNP), a classic RNA model. Critical aggregation concentrations (CAC) were determined for the as-prepared tridentate imidazole derivatives as ligands and corresponding mixtures of equivalent ligand and La³⁺ ion with a mole rate of 1:1. It denotes that the introduction of La³⁺ ion increases the CAC values of imidazole derivatives by about 2 to 3 folds. Foaming test shows that the foam height is positively correlated with the length of hydrophobic chain. Transesterification of HPNP mediated by LaLⁿ nanoarchitectonics indicates that the introducing of hydrophobic chain benefits rate enhancement, showing excess three orders of magnitude acceleration under physiological conditions (pH 7.0, 25 °C). Moreover, catalytic reactivities of these La(III) complexes increased along with the increase in chain length: LaL¹ < LaL² < LaL³ < LaL⁴, suggesting a positive correlation to hydrophobic chain length.

Molecular Dynamic Study of Mechanism Underlying Nature of Molecular Recognition and the Role of Crosslinker in the Synthesis of Salmeterol-Targeting Molecularly Imprinted Polymer for Analysis of Salmeterol Xinafoate in Biological Fluid

The rational preparation of molecularly imprinted polymers (MIPs) in order to have selective extraction of salmeterol xinafoate (SLX) from serum was studied. SLX is an acting β-adrenergic receptor agonist used in the treatment of asthma and has an athletic performance-enhancing effect. Molecular dynamics were used for the simulation of the SLX-imprinted pre-polymerization system, to determine the stability of the system. The computational simulation showed that SLX as a template, 4-hydroxyethyl methacrylate (HEMA) as a monomer, and trimethylolpropane trimethacrylate (TRIM) as a crosslinker in mol ratio of 1:6:20 had the strongest interaction in terms of the radial distribution functional. To validate the computational result, four polymers were synthesized using the precipitation polymerization method, and MIP with composition and ratio corresponding with the system with the strongest interaction as an MD simulation result showed the best performance, with a recovery of 96.59 ± 2.24% of SLX in spiked serum and 92.25 ± 1.12% when SLX was spiked with another analogue structure. Compared with the standard solid phase extraction sorbent C-18, which had a recovery of 79.11 ± 2.96%, the MIP showed better performance. The harmony between the simulation and experimental results illustrates that the molecular dynamic simulations had a significant role in the study and development of the MIPs for analysis of SLX in biological fluid.

Recent development in the design of artificial enzymes through molecular imprinting technology

Enzymes, a class of proteins or RNA with high catalytic efficiency and specificity, have inspired generations of scientists to develop enzyme mimics with similar capabilities. Many enzyme mimics have been...

Ronald C.D. Breslow (1931-2017): A career in review

Reviewed herein are key research accomplishments of Professor Ronald Charles D. Breslow (1931-2017) throughout his more than 60 year research career. These accomplishments span a wide range of topics, most notably physical organic chemistry, medicinal chemistry, and bioorganic chemistry. These topics are reviewed, as are topics of molecular electronics and origin of chirality, which combine to make up the bulk of this review. Also reviewed briefly are Breslow's contributions to the broader chemistry profession, including his work for the American Chemical Society and his work promoting gender equity. Throughout the article, efforts are made to put Breslow's accomplishments in the context of other work being done at the time, as well as to include subsequent iterations and elaborations of the research.

Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts

Efficient removal of low-concentration refractory pollutants is a crucial problem to ensuring water safety. The use of heterogeneous catalysis of molecular imprinting technology combined with traditional catalysts is a promising method to improve removal efficiency. Presently, the research into molecular imprinting targeting catalysts focuses mainly on material preparation and performance optimization. However, more researchers are investigating other applications of imprinting materials. This review provides recent progress in photocatalyst preparation, electrocatalyst, and Fenton-like catalysts synthesized by molecular imprinting. The principle and control points of target catalysts prepared by precipitation polymerization (PP) and surface molecular imprinting (S-MIP) are introduced. Also, the application of imprinted catalysts in targeted degradation of drugs, pesticides, environmental hormones, and other refractory pollutants is summarized. In addition, the reusability and stability of imprinted catalyst in water treatment are discussed, and the possible ecotoxicity risk is analyzed. Finally, we appraised the prospects, challenges, and opportunities of imprinted catalysts in the advanced oxidation process. This paper provides a reference for the targeted degradation of refractory pollutants and the preparation of targeted catalysts.

Ag(I) Pyridine-Amidoxime Complex as the Catalysis Activity Domain for the Rapid Hydrolysis of Organothiophosphate-Based Nerve Agents: Mechanistic Evaluation and Application

Two novel Ag(I) complexes containing synergistic pyridine and amidoxime ligands (Ag-DPAAO and Ag-PAAO) were first designed as complex monomers. Taking advantage of the molecular imprinting technique and solvothermal method, molecular imprinted porous cross-linked polymers (MIPCPs) were developed as a robust platform for the first time to incorporate Ag-PAAO into a polymer material as a recyclable catalyst. Advantageously, the observed pseudo first-order rate constant (k_obs) of MIPCP-Ag-PAAO-20% for ethyl-parathion (EP) hydrolysis is about 1.2 × 10⁴-fold higher than that of self-hydrolysis (30 °C, pH = 9). Furthermore, the reaction mechanism of the MIPCP-containing Ag-PAAO-catalyzed organothiophosphate was analyzed in detail using density functional theory and experimental spectra, indicating that the amidoxime can display dual roles for both the key coordination with the silver ion and nucleophilic attack to weaken the P-OAr bond in the catalytic active site.

Preparation of efficient, stable, and reusable copper-phosphotriesterase hybrid nanoflowers for biodegradation of organophosphorus pesticides

Phosphotriesterase (PTE) is considered to be a good biodegradation agent for organophosphorus pesticides. However, the instability of the free PTE limits its application. In this study, the free PTE was hybridized with copper ions (Cu²⁺) to enhance its catalytic stability and activity. The acquired particles were freeze-dried after precipitation with PO₄^3- at 4 °C for 72 h. Scanning electron microscopy showed that the Cu-PTE complexes formed flower-like nanoparticles after hybridization. The characteristic peaks of both the enzyme and metal material were revealed by Fourier transform-infrared spectroscopy. X-ray diffraction analysis indicated that PTE was encapsulated in the Cu₃(PO₄)₂·3H₂O based hybrid nanoflowers. Compared with free PTE, the catalytic activity of Cu-PTE hybrid nanoflowers was significantly increased about 2.2 fold. The catalytic efficiency (k_cat/V_max) of Cu-PTE hybrid nanoflowers was 1.76 fold than that of free PTE. The stability of the immobilized PTE under thermal and pH conditions was improved and the tolerance of it to organic solvents was also enhanced. Moreover, the Cu-PTE hybrid nanoflowers still exhibited 72.3 % relative activity after ten consecutive reactions. In general, this is the first time to use copper based hybrid nanoflowers to immobilize PTE, and the immobilized enzyme shows excellent performance on OPs degradation. The Cu-PTE hybrid nanoflowers may have great potential in the biodegradation of organophosphorus compounds in future.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

Flow-Through Macroporous Polymer Monoliths Containing Artificial Catalytic Centers Mimicking Chymotrypsin Active Site

Synthetic catalysts that could compete with enzymes in term of the catalytic efficiency but surpass them in stability have a great potential for the practical application. In this work, we have developed a novel kind of organic catalysts based on flow-through macroporous polymer monoliths containing catalytic centers that mimic the catalytic site of natural enzyme chymotrypsin. It is known that chymotrypsin catalytic center consists of L-serine, L-histidine, and L-aspartic acid and has specificity to C-terminal residues of hydrophobic amino acids (L-phenylalanine, L-tyrosine, and L-tryptophan). In this paper, we have prepared the macroporous polymer monoliths bearing grafted polymer layer on their surface. The last one was synthesized via copolymerization of N-methacryloyl-L-serine, N-methacryloyl-L-histidine, and N-methacryloyl-L-aspartic acid. The spatial orientation of amino acids in the polymer layer, generated on the surface of monolithic framework, was achieved by coordinating amino acid-polymerizable derivatives with cobalt (II) ions without substrate-mimicking template and with its use. The conditions for the preparation of mimic materials were optimized to achieve a mechanically stable system. Catalytic properties of the developed systems were evaluated towards the hydrolysis of ester bond in a low molecular substrate and compared to the results of using chymotrypsin immobilized on the surface of a similar monolithic framework. The effect of flow rate increase and temperature elevation on the hydrolysis efficiency were evaluated for both mimic monolith and column with immobilized enzyme.

Pesticides and herbicides

This paper highlights a review of scientific papers published in the year 2019 regarding pesticides and herbicides. The scientific review presented in this paper includes the presence and occurrence of pesticides and herbicides in the environment. The entire review divided into different sections, which are grouped into four main sections. Each of these sections provides studies conducted on toxicology, ecological risk assessment, strategies of treatment, policies, modeling, and guidelines regarding pesticides and herbicides management. PRACTITIONERS POINTS: This paper highlights the review of scientific literature published in the year 2019. The review includes the presence and occurrence of pesticides and herbicides in the environment. The review focuses on toxicology, ecological risk assessment, strategies of treatment, policies, modelling and guidelines regarding pesticides and herbicides management. The literature review covers selected papers relevant to the topic.

Boronic Acid Modified Polymer Nanoparticles for Enhanced Bacterial Deactivation

A new method has been developed to enhance the antibacterial efficiency of traditional antibiotics. Chloramphenicol-imprinted polymer particles were decorated with boronic acid to improve their binding to both Gram-negative and -positive bacteria. The polymer particles have a high antibiotic loading and provide a slow release of the antibiotic payload to deactivate the target bacteria. The boronic acid modified polymer particles not only contribute to enhanced antibacterial efficiency, but also have the potential to act as scavengers to remove unused antibiotic from the environment.

Preparation of Fluorescent Molecularly Imprinted Polymers via Pickering Emulsion Interfaces and the Application for Visual Sensing Analysis of Listeria Monocytogenes

In this work, a novel molecularly imprinted polymer (MIP) with water-soluble CdTe quantum dots (QDs) was synthesized by oil-in-water Pickering emulsion polymerization using whole Listeria monocytogenes as the template. Listeria monocytogenes was first treated by acryloyl-functionalized chitosan with QDs to form a bacteria-chitosan network as the water phase. This was then stabilized in an oil-in-water emulsion comprising a cross-linker, monomer, and initiator, causing recognition sites on the surface of microspheres embedded with CdTe QDs. The resulting MIP microspheres enabled selective capture of the target bacteria via recognition cavities. The target bacteria Listeria monocytogenes was detected. Scanning electron microscopy (SEM) characterization showed that the MIPs had a rough spherical shape. There was visual fluorescence detection via quenching in the presence of the target molecule, which offered qualitative detection of Listeria monocytogenes in milk and pork samples. The developed method simplified the analysis process and did not require any sample pretreatment. In addition, the fluorescence sensor provided an effective, fast, and convenient method for Listeria monocytogenes detection in food samples.

Molecularly Imprinted Polymer Based Sensors for Medical Applications

Sensors have been extensively used owing to multiple advantages, including exceptional sensing performance, user-friendly operation, fast response, high sensitivity and specificity, portability, and real-time analysis. In recent years, efforts in sensor realm have expanded promptly, and it has already presented a broad range of applications in the fields of medical, pharmaceutical and environmental applications, food safety, and homeland security. In particular, molecularly imprinted polymer based sensors have created a fascinating horizon for surface modification techniques by forming specific recognition cavities for template molecules in the polymeric matrix. This method ensures a broad range of versatility to imprint a variety of biomolecules with different size, three dimensional structure, physical and chemical features. In contrast to complex and time-consuming laboratory surface modification methods, molecular imprinting offers a rapid, sensitive, inexpensive, easy-to-use, and highly selective approaches for sensing, and especially for the applications of diagnosis, screening, and theranostics. Due to its physical and chemical robustness, high stability, low-cost, and reusability features, molecularly imprinted polymer based sensors have become very attractive modalities for such applications with a sensitivity of minute structural changes in the structure of biomolecules. This review aims at discussing the principle of molecular imprinting method, the integration of molecularly imprinted polymers with sensing tools, the recent advances and strategies in molecular imprinting methodologies, their applications in medical, and future outlook on this concept.