Visible light-induced crosslinking of unmodified gelatin with PEGDA for DLP-3D printable hydrogels

Engineering of gelatin scaffold by extracellular matrix of Sertoli cells for embryonic stem cell proliferation

Mimicking the microenvironment of seminiferous tubules plays an indispensable role in directing differentiation of stem cells toward germ cells in vitro. In this work, we fabricated electrospun gelatin (EG) mats (i.e., with diameter <500 nm) conditioned with Sertoli cells' extracellular matrix (ECM) to simulate both 3D structures and composition of normal testis tissue. Sertoli cells were isolated from mice testis and represented through immunocytochemistry (ICC) staining for expression of vimentin, a specific marker of Sertoli cells. The morphological characteristics of ECM-coated scaffold were investigated under scanning electron microscope (SEM). The efficient elimination of cells was confirmed by MTT assay. Furthermore, the cyto/biocompatibility of ECM-conditioned EG scaffold was determined for Sertoli cells and embryonic stem cells (ESCs), alone and as in co-culture. According to the results, the designed scaffold provided a mat for cell proliferation with negligible toxicity (almost 100% cell viability). SEM micrographs displayed cells with elongated shape and complete stretching morphology when compared with those cultured on scaffold without ECM. Moreover, an enhanced differentiation of ESCs toward sperm-generating cells was obtained through co-culturing of Sertoli cells and ESCs, where cell viability was found almost 100%. Our findings introduce the ECM-conditioned EG scaffold as a potentially influential engineered substrate for in vitro guidance of stem cells differentiation by mimicking the native microenvironment.

Systematic screening of photopolymer resins for stereolithography (SLA) 3D printing of solid oral dosage forms: Investigation of formulation factors on printability outcomes

Pharmaceutical three-dimensional printing (3DP) is now in its golden age. Recent years have seen a dramatic increase in the research in 3D printed pharmaceuticals due to their potential to deliver highly personalised medicines, thus revolutionising the way medicines are designed, manufactured, and dispensed. A particularly attractive 3DP technology used to manufacture medicines is stereolithography (SLA), which features key advantages in terms of printing resolution and compatibility with thermolabile drugs. Nevertheless, the enthusiasm for pharmaceutical SLA has not been followed by the introduction of novel excipients specifically designed for the fabrication of medicines; hence, the choice of biocompatible polymers and photoinitiators available is limited. This work provides an insight on how to maximise the usefulness of the limited materials available by evaluating how different formulation factors affect printability outcomes of SLA 3D printed medicines. 156 photopolymer formulations were systematically screened to evaluate the influence of factors including photoinitiator amount, photopolymer molecular size, and type and amount of liquid filler on the printability outcomes. Collectively, these factors were found highly influential in modulating the print quality of the final dosage forms. Findings provide enhanced understanding of formulation parameters informing the future of SLA 3D printed medicines and the personalised medicines revolution.

Flavin mononucleotide in visible light photoinitiating systems for multiple-photocrosslinking and photoencapsulation strategies

Visible light-induced photocrosslinking techniques have attracted significant attention for their flexibility, controllability, safety, and energy conservation, especially in tissue engineering and biofabrication, compared to UV photocrosslinking. Despite these advantages, current photoinitiators are constrained by various challenges, including inadequate photoinitiation efficiency, low biocompatibility, poor water solubility, and limited compatibility with diverse crosslinking systems. Here, a water-soluble derivative of riboflavin, flavin mononucleotide (FMN-), was used to assess its potential as an initiator in multiple-photocrosslinking systems, including radical photopolymerization, dityrosine, and ditryptophan coupling crosslinking, under blue light irradiation. Blue light irradiation facilitated an efficient electron transfer reaction between FMN- and persulfate, owing to their suitable spectral compatibility and photoactivity. The resulting oxidizing free radicals and excited triplet state of FMN- served as initiating active species for the multiple-photocrosslinking reactions. The combination of FMN- and potassium persulfate (KPS) exhibited exceptional photoinitiation efficiency for various biomaterials, including silk fibroin, gelatin, poly(ethylene glycol) diacrylate, and carboxymethyl cellulose modified with amino acids. Furthermore, the cytocompatibility of the FMN-/KPS photoinitiator was demonstrated by the survival rates of 3T3-LI fibroblasts encapsulated in it, which exceeded 95 % when compared to a commercial initiator. STATEMENT OF SIGNIFICANCE: By introducing persulfate, the photoinitiation efficiency of flavin mononucleotide was significantly improved. The application scenarios of flavin mononucleotide and persulfate combinations were also greatly extended, including radical photopolymerization, dityrosine, diphenylalanine, and ditryptophan coupling crosslinking. Among them, the coupling crosslinking of amino acids (di-phenylalanine, and di-tryptophan) modified carboxymethyl cellulose, to our knowledge, was first reported. The excellent cytocompatibility of cell encapsulation further proved that the combinations of flavin mononucleotide and persulfate have great potential in tissue engineering.

A Biodegradable, Adhesive, and Stretchable Hydrogel and Potential Applications for Allergic Rhinitis and Epistaxis

Bioadhesive hydrogels have attracted considerable attention as innovative materials in medical interventions and human-machine interface engineering. Despite significant advances in their application, it remains critical to develop adhesive hydrogels that meet the requirements for biocompatibility, biodegradability, long-term strong adhesion, and efficient drug delivery vehicles in moist conditions. A biocompatible, biodegradable, soft, and stretchable hydrogel made from a combination of a biopolymer (unmodified natural gelatin) and stretchable biodegradable poly(ethylene glycol) diacrylate is proposed to achieve durable and tough adhesion and explore its use for convenient and effective intranasal hemostasis and drug administration. Desirable hemostasis efficacy and enhanced therapeutic outcomes for allergic rhinitis are accomplished. Biodegradation enables the spontaneous removal of materials without causing secondary damage and minimizes medical waste. Preliminary trials on human subjects provide an essential foundation for practical applications. This work elucidates material strategies for biodegradable adhesive hydrogels, which are critical to achieving robust material interfaces and advanced drug delivery platforms for novel clinical treatments.

Recent Progress of the Vat Photopolymerization Technique in Tissue Engineering: A Brief Review of Mechanisms, Methods, Materials, and Applications

Vat photopolymerization (VP), including stereolithography (SLA), digital light processing (DLP), and volumetric printing, employs UV or visible light to solidify cell-laden photoactive bioresin contained within a vat in a point-by-point, layer-by-layer, or volumetric manner. VP-based bioprinting has garnered substantial attention in both academia and industry due to its unprecedented control over printing resolution and accuracy, as well as its rapid printing speed. It holds tremendous potential for the fabrication of tissue- and organ-like structures in the field of regenerative medicine. This review summarizes the recent progress of VP in the fields of tissue engineering and regenerative medicine. First, it introduces the mechanism of photopolymerization, followed by an explanation of the printing technique and commonly used biomaterials. Furthermore, the application of VP-based bioprinting in tissue engineering was discussed. Finally, the challenges facing VP-based bioprinting are discussed, and the future trends in VP-based bioprinting are projected.

Trends in Photopolymerizable Bioinks for 3D Bioprinting of Tumor Models

Three-dimensional (3D) bioprinting technologies involving photopolymerizable bioinks (PBs) have attracted enormous attention in recent times owing to their ability to recreate complex structures with high resolution, mechanical stability, and favorable printing conditions that are suited for encapsulating cells. 3D bioprinted tissue constructs involving PBs can offer better insights into the tumor microenvironment and offer platforms for drug screening to advance cancer research. These bioinks enable the incorporation of physiologically relevant cell densities, tissue-mimetic stiffness, and vascularized channels and biochemical gradients in the 3D tumor models, unlike conventional two-dimensional (2D) cultures or other 3D scaffold fabrication technologies. In this perspective, we present the emerging techniques of 3D bioprinting using PBs in the context of cancer research, with a specific focus on the efforts to recapitulate the complexity of the tumor microenvironment. We describe printing approaches and various PB formulations compatible with these techniques along with recent attempts to bioprint 3D tumor models for studying migration and metastasis, cell-cell interactions, cell-extracellular matrix interactions, and drug screening relevant to cancer. We discuss the limitations and identify unexplored opportunities in this field for clinical and commercial translation of these emerging technologies.

Visible Light-Based 4D-Bioprinted Tissue Scaffold

Emerging four-dimensional (4D) printing strategies offer improved alternatives to conventional three-dimensional (3D)-bioprinted structures for better compliance and simplicity of application for tissue engineering. Little is reported on simple 3D-bioprinted structures prepared by digital light processing (DLP) that can change shape-to-complex constructs (4D bioprinting) in response to cell-friendly stimuli, such as hydration. In the current research work, a bioink consisting of a blend of gelatin methacryloyl (GelMA) and poly(ethylene glycol) dimethacrylate (PEGDM) with a photoinitiator and a photoabsorber was developed and printed by DLP-based 3D bioprinting operated with visible light (405 nm). The 3D-bioprinted constructs combined with differential cross-linking due to photoabsorber-induced light attenuation were leveraged to realize structural anisotropy, which led to rapid shape deformation (as low as ≈30 min) upon hydration. The sheet thickness influenced the degree of curvature, whereas the incorporation of angled strands provided control of the deformation of the 3D-printed structure. The 4D-bioprinted gels supported the viability and proliferation of cells. Overall, this study introduces a cytocompatible bioink formulation for 4D bioprinting to yield shape-morphing, cell-laden hydrogels for tissue engineering.

Photocurable Thiol-yne Alginate Hydrogels for Regenerative Medicine Purposes

Every year millions of people worldwide undergo surgical interventions, with the occurrence of mild or severe post-treatment consequences meaning that rehabilitation plays a key role in modern medicine. Considering the cases of burns and plastic surgery, the pressing need for new materials that can be used for wound patches or body fillers and are able to sustain tissue regeneration and promote cell adhesion and proliferation is clear. The challenges facing next-generation implant materials also include the need for improved structural properties for cellular organization and morphogenic guidance together with optimal mechanical, rheological, and topographical behavior. Herein, we propose for the first time a sodium alginate hydrogel obtained by a thiol-yne reaction, easily synthesized using carbodiimide chemistry in a two-step reaction. The hydrogels were formed in all cases within a few minutes of light irradiation, showing good self-standing properties under solicitation. The mechanical, rheological, topographical, and swelling properties of the gels were also tested and reported. Lastly, no cytotoxicity was detected among the hydrogels. Soluble extracts in culture media allowed cell proliferation, and no differences between samples were detected in terms of metabolic activity and DNA content. These results suggest the potential use of these cytocompatible hydrogels in tissue engineering and regenerative medicine.

Electroconductive Photo-Curable PEGDA-Gelatin/PEDOT:PSS Hydrogels for Prospective Cardiac Tissue Engineering Application

Electroconductive hydrogels (ECHs) have attracted interest for tissue engineering applications due to their ability to promote the regeneration of electroactive tissues. Hence, ECHs with tunable electrical and mechanical properties, bioactivity, biocompatibility and biodegradability are demanded. In this work, ECHs based on photo-crosslinked blends of polyethylene glycol diacrylate (PEGDA) and gelatin with different PEGDA:gelatin ratios (1:1, 1.5:1 and 2:1 wt./wt.), and containing poly (3,4-ethylenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS) (0.0, 0.1, 0,3 and 0.5% w/v%) were prepared. Main novelty was the use of gelatin as bioactive component and co-initiator in the photo-crosslinking process, leading to its successful incorporation in the hydrogel network. Physical properties could be modulated by the initial PEGDA:gelatin weight ratio. Pristine hydrogels with increasing PEGDA:gelatin ratio showed: (i) an increasing compressive elastic modulus from 5 to 28 kPa; (ii) a decreasing weight loss from 62% to 43% after 2 weeks incubation in phosphate buffered saline at 37°C; (iii) reduced crosslinking time; (iv) higher crosslinking density and (v) lower water absorption. The addition of PEDOT:PSS in the hydrogels reduced photo-crosslinking time (from 60 to 10 s) increasing their surface and bulk electrical properties. Finally, in vitro tests with human cardiac fibroblasts showed that hydrogels were cytocompatible and samples with 1.5:1 initial PEGDA:gelatin ratio promoted the highest cell adhesion at 24 h. Results from this work suggested the potential of electroconductive photo-curable PEGDA-gelatin/PEDOT:PSS hydrogels for prospective cardiac tissue engineering applications.

Effects of the number and position of methoxy substituents on triphenylamine-based chalcone visible-light-absorbing photoinitiators

Five visible-light-absorbing triphenylamine-based chalcone photoinitiators (CY1–CY5) have been synthesized for application in free radical photopolymerization.