Freeze dried extract from olive leaves: Valorisation, extraction kinetics and extract characterization

Exploring the bioactive potential of algae residue extract via subcritical water extraction: Insights into chemical composition and biological activity

Gelidium sesquipedale is valued in the Spanish agar industry, but its production generates substantial waste, often discarded despite its nutritional and bioactive content. Subcritical water extraction (SWE) at 175 °C and 50 bar for 130 min was performed on this waste after agar extraction, comparing it to conventional ethanol extraction. The SWE extract exhibited superior nutritional profile, including proteins (170.6 ± 1.0 mg/gfreeze-dried-extract), essential amino acids (18.1%), carbohydrates (148.1 ± 0.3 mg/gfreeze-dried-extract), total phenolic content (57 ± 7 mg-EqGA/gfreeze-dried-extract), and also containing Maillard reaction compounds, such as 5-hydroxymethylfurfural, furfural, 2-furanmethanol, 1-(2-furanyl)-ethanone, and 5-methyl-2-furfural, influencing color, aroma and flavor. This extract showed better antioxidant and anti-inflammatory properties than the conventional extract, and higher xanthine oxidase, tyrosinase, and acetylcholinesterase inhibition activities. Toxicological assessment on human cells indicated the safety of the SWE extract. Therefore, SWE technology offers a promising method to valorize G. sesquipedale residue, yielding a bioactive and nutrient-rich extract suitable for food and nutraceutical applications.

PhInd database - Polyphenol content in Agri-food by-products and trends in extraction technologies: A critical review

Sustainable Development Goal 12 and target 12.3 set by the United Nations aims to reduce"food waste" per capita global for 50% losses by 2030. Databases such as the PhInd could help us to achieve set goals via mapping the potential ways for valorization of polyphenols from the agri-food by-products and waste. Fruit by-products (73.2% of the PhInd entries) are the most studied sources of polyphenols and future studies might be more focused on vegetables. More than half (55.8%) of entries were evaluated polyphenols in samples created in laboratory. These samples could have significantly different composition from industrial samples. Solid-liquid extraction (53.5%) and solvents like water, ethanol and aqueous ethanol (51.5%) were the most often used for extraction of polyphenols. Green solvents as NADES (0.4%) are rarely used in studies and should be more explored.

Simultaneous High-Performance Recovery and Extended Acid-Catalyzed Hydrolysis of Oleuropein and Flavonoid Glycosides of Olive (Olea europaea) Leaves: Hydrothermal versus Ethanol Organosolv Treatment

Olive leaves (OLLs) are an exceptional bioresource of natural polyphenols with proven antioxidant activity, yet the applicability of OLL extracts is constrained by the relatively high polarity of the major polyphenols, which occur as glycosides. To overcome this limitation, OLLs were subjected to both hydrothermal and ethanol organosolv treatments, fostered by acid catalysis to solicit in parallel increased polyphenol recovery and polyphenol modification into simpler, lower-polarity substances. After an initial screening of natural organic acids, oxalic acid (OxAc) was found to be the highest-performing catalyst. The extraction behavior using OxAc-catalyzed hydrothermal and ethanol organosolv treatments was appraised using kinetics, while treatment optimization was accomplished by deploying response-surface methodology. The comparative assessment of the composition extracts produced under optimal conditions of residence time and temperature was performed with liquid chromatography-tandem mass spectrometry and revealed that OLLs treated with 50% ethanol/1.5% HCl suffered extensive oleuropein and flavone glycoside hydrolysis, affording almost 23.4 mg hydroxytyrosol and 2 mg luteolin per g dry weight. On the other hand, hydrothermal treatment with 5% OxAc provided 20.2 and 0.12 mg of hydroxytyrosol and luteolin, respectively. Apigenin was in all cases a minor extract constituent. The study presented herein demonstrated for the first time the usefulness of using a natural, food-grade organic acid to perform such a task, yet further investigation is needed to maximize the desired effect.

Supercritical Impregnation of PETG with Olea europaea Leaf Extract: Influence of Operational Parameters on Expansion Degree, Antioxidant and Mechanical Properties

PETG (poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate)) is an amorphous copolymer, biocompatible, recyclable, and versatile. Nowadays, it is being actively researched for biomedical applications. However, proposals of PETG as a platform for the loading of bioactive compounds from natural extract are scarce, as well as the effect of the supercritical impregnation on this polymer. In this work, the supercritical impregnation of PETG filaments with Olea europaea leaf extract was investigated, evaluating the effect of pressure (100-400 bar), temperature (35-55 °C), and depressurization rate (5-50 bar min-1) on the expansion degree, antioxidant activity, and mechanical properties of the resulting filaments. PETG expansion degree ranged from ~3 to 120%, with antioxidant loading ranging from 2.28 to 17.96 g per 100 g of polymer, corresponding to oxidation inhibition values of 7.65 and 66.55%, respectively. The temperature and the binary interaction between pressure and depressurization rate most affected these properties. The mechanical properties of PETG filaments depended greatly on process variables. Tensile strength values were similar or lower than the untreated filaments. Young's modulus and elongation at break values decreased below ~1000 MPa and ~10%, respectively, after the scCO2 treatment and impregnation. The extent of this decrease depended on the supercritical operational parameters. Therefore, filaments with higher antioxidant activity and different expansion degrees and mechanical properties were obtained by adjusting the supercritical processing conditions.

Recovery of Oleuropein from Olive Leaf Extract Using Zinc Oxide Coated by Polyaniline Nanoparticle Mixed Matrix Membranes

This study explores the integration of zinc oxide coated with polyaniline (ZnO-PANI) nanoparticles into a poly(ether sulfone) (PES) matrix to concurrently enhance permeate flux and oleuropein (OLP) rejection during the filtration of olive leaf extract (OLE). The effect of ZnO-PANI content on porosity, pore size, surface hydrophilicity, and pure water flux (PWF) was studied. The results indicate that an increase in ZnO-PANI content (0-0.2%) leads to a 3-fold increase in mean pore size, permeability (1.29-7.18 L/m2 h bar), porosity (72.2-77.8%), and improved surface hydrophilicity of the prepared membranes. Membrane performance was tested for OLE permeate flux of the OLE and total phenolic compounds (TPC) rejection at various pressures (10-30 bar), the performance of the OLP rejection at 30 bar, and fouling resistance. The 0.2 wt % ZnO-PANI membrane exhibits the highest permeate flux, while the 0.4 wt % ZnO-PANI membrane offers the highest rejection values (90-97% for TPC and 100% for OLP). Bare PES demonstrated the best fouling resistance. Strategic ZnO-PANI incorporation achieves a balance, enhancing both the flux and rejection efficiency. The 0.2 wt % ZnO-PANI membrane emerges as particularly favorable, striking a beneficial equilibrium between permeate flux and OLP rejection. Intriguingly, the use of these membranes for OLE filtration, postpretreatment with ultrafiltration (UF), results in a remarkable 100% rejection of OLP. This discovery underscores the significant and specific separation of OLP from OLE facilitated by a ZnO-PANI-based mixed matrix membrane (MMM). The study contributes valuable insights into the development of advanced membranes with enhanced filtration capabilities for high-added value phenolic compound separation.

Leaching of Phytochemicals from Beans during Hydration, Kinetics, and Modeling

In the current era, there is a growing emphasis on the circular economy and the valorization of waste products. Bean processing industries generate substantial nutrient-rich waste laden with valuable phytochemicals. Understanding the leaching patterns and kinetics of major phytochemicals is key to designing better processes leading to increased sustainability. This review investigates phytochemical leaching mechanisms and kinetic modeling methods. Firstly we lay the foundation with a broad theoretical framework, and later deal with kinetic modeling approaches and promising areas for future research. Currently, the composition of industrial-scale bean wastewater remains undocumented in the open literature. Nonetheless, drawing from existing studies and general bean composition knowledge, we proposed a multi-phase leaching process. We hypothesize three distinct phases: initial leaching of phytochemicals from the outer seed coat, followed by a second phase involving polysaccharides, and concluding with a third phase wherein phenolic acids within the cotyledons leach into the hydration water. This review aims to shed light on the complex process of phytochemical leaching from common beans during hydration. By combining theoretical insights and practical modeling strategies, this work seeks to enhance our understanding of this phenomenon and ultimately contribute to the optimization of food processing methods with reduced environmental impact.

Chlorophylls as Natural Bioactive Compounds Existing in Food By-Products: A Critical Review

Chlorophylls are a group of naturally occurring pigments that are responsible for the green color in plants. This pigment group could have numerous health benefits due to its high antioxidant activity, including anti-inflammatory, anti-cancer, and anti-obesity properties. Many food by-products contain a high level of chlorophyll content. These by-products are discarded and considered environmental pollutants if not used as a source of bioactive compounds. The recovery of chlorophylls from food by-products is an interesting approach for increasing the sustainability of food production. This paper provides insight into the properties of chlorophylls and the effect of different treatments on their stability, and then reviews the latest research on the extraction of chlorophylls from a sustainable perspective.

Impact of Sample Pretreatment and Extraction Methods on the Bioactive Compounds of Sugar Beet (Beta vulgaris L.) Leaves

To find the most optimal green valorization process of food by-products, sugar beet (Beta vulgaris L.) leaves (SBLs) were freeze-dried and ground with/without liquid nitrogen (LN), as a simple sample pretreatment method, before ultrasound-assisted extraction (UAE) of polyphenols. First, the water activity, proximate composition, amino acid (AA) and fatty acid (FA) profiles, and polyphenol oxidase (PPO) activity of dried and fresh SBLs were evaluated. Then, conventional extraction (CE) and UAE of polyphenols from SBLs using water/EtOH:water 14:6 (v/v) as extracting solvents were performed to determine the individual and combined effects of the sample preparation method and UAE. In all the freeze-dried samples, the specific activity of PPO decreased significantly (p ≤ 0.05). Freeze-drying significantly increased (p ≤ 0.05) the fiber and essential FA contents of SBLs. The FA profile of SBLs revealed that they are rich sources of oleic, linoleic, and α-linolenic acids. Although freeze-drying changed the contents of most AAs insignificantly, lysine increased significantly from 7.06 ± 0.46% to 8.32 ± 0.38%. The aqueous UAE of the freeze-dried samples without LN pretreatment yielded the most optimal total phenolic content (TPC) (69.44 ± 0.15 mg gallic acid equivalent/g dry matter (mg GAE/g DM)) and excellent antioxidant activities. Thus, combining freeze-drying with the aqueous UAE method could be proposed as a sustainable strategy for extracting bioactive compounds from food by-products.

Edible Films Made of Dried Olive Leaf Extract and Chitosan: Characterization and Applications

Nowadays a possible strategy in food preservation consists of the use of active and functional packaging to improve safety and ensure a longer shelf life of food products. Many studies refer to chitosan-based films because of the already-known chitosan (CH) antibacterial and antifungal activity. In this work, we developed CH-based films containing Dried Olive Leaf Extract (DOLE) obtained by Naviglio extractor, with the aim to investigate the polyphenols yield and the antioxidant activity of this extract entrapped in CH-based-edible films. Olive tree cultivation produces a huge amount of byproducts that are usually simply burned. Phenolic compounds are already studied for their beneficial effects on human health. Some studies reported that phenols isolated from olive leaves have been shown to inhibit the growth of different strains of microorganisms. Thus, the antimicrobial effect of DOLE-containing films against bacterial strains (Salmonella enterica subsp. enterica serovar Typhimurium ATCC^® 14028, Salmonella enteritidis RIVM 706, and Enterococcus faecalis ATCC^® 29212) was tested in vitro. The DOLE component of the films is effective in inhibiting all the bacteria tested in a dose-dependent manner. Thus, it was demonstrated that these edible films can act as active bioplastics when used to wrap hamburgers in substitution for baking paper, which is normally used.

Ultrasound-Assisted Extraction of Natural Pigments From Food Processing By-Products: A Review

Ultrasound is an emerging technology, which has been highly explored in the food area to improve processes and products. When ultrasound is applied to a product with solid or fluid characteristics, the passage of acoustic waves and acoustic cavitation generates different mechanisms responsible for modifications in the original matrix of the sample. These effects of ultrasound can also be used to take advantage of by-products, for example by extracting compounds of interest, including natural pigments. Natural pigments or colorants are being highly demanded by different industries not only for color purposes but also due to their healthy properties, the greater demands in regulations and new consumer preferences. This review presents an updated critical analysis of the application of ultrasound-assisted extraction (UAE) to obtain natural pigments from food processing by-products. Initially, the ultrasound effects and mechanisms that improve the extraction of natural pigments in a fluid medium, as well as the factors that influence the extraction and the energy consumption of UAE are analyzed and described. Subsequently, the UAE application to obtain pigments belonging to the groups of carotenoids, chlorophyll, anthocyanins and betalains is evaluated. These sections detail the processing conditions, positive and negative effects, as well as possible applications of the extracted pigments. This review presents relevant information that may be useful to expand and explore new applications of ultrasound technology as well as promote the revaluation of by-products to obtain pigments that can be used in food, pharmaceutical or cosmetic industries.

Roles of Drying, Size Reduction, and Blanching in Sustainable Extraction of Phenolics from Olive Leaves

It is now known that olive leaves contain a sizable portion of polyphenols and there is much research highlighting that these natural ingredients favorably exhibit bio-functional activities. In this regard, many studies have focused on the exploration of optimum conditions involved directly in the extraction process. These investigations, while being highly valuable, may somewhat cast a shadow over other contributing factors such as those involved in the preprocessing of leaves, including size reduction, drying, and blanching. The use of these unit operations under appropriate conditions, together with other benefits, potentially exert improved surface area, homogeneity, and diffusion/mass transfer which may help develop the liberation of target bio-compounds. The research work in this area, particularly size reduction, is relatively limited. Although in various experiments they are incorporated, not many studies have focused on them as the main predictor variables. The performance of further research may help ascertain the magnitude of their effects. Consideration of the operational parameters in preprocessing step is equally important as those in the processing/extraction step that may comparably influence on the extraction efficiency. This review provides an overview of the potential roles of drying, size reduction, and blanching in the extraction efficiency of phenolics from olive leaves.

Biophenolic Profile Modulations in Olive Tissues as Affected by Manganese Nutrition

Manganese (Mn) is an essential element that intervenes in several plant metabolic processes. The olive tree, and its fruits and leaves, are known as a source of nutraceuticals since they are rich in biophenols. However, there is still a serious lack of data about biophenolic distribution in olive stems and roots under Mn fertilisation. In this context, our study aimed to examine the effects of Mn fertilisation on the biophenolic profile in the leaves, stems, and roots of the ‘Istarska bjelica’ olive cultivar. The experiment was set up in a greenhouse, during a period of five months, as a random block design consisting of three treatments with varying Mn concentrations in full-strength Hoagland’s nutrient solution (0.2 µM Mn, 12 µM Mn, and 24 µM Mn). The obtained results indicate that the amount of Mn in the examined olive plant tissues was significantly higher under 12 µM Mn and 24 µM Mn treatments compared to that of the 0.2 µM Mn treatment. While the concentration of biophenols varied in roots depending on the compound in question, a strong positive impact of the increased Mn concentration in nutrient solution (12 µM Mn and 24 µM Mn) on the concentrations of the main biophenolic compounds was observed in stems. The concentration of oleuropein in leaves almost doubled at 24 µM Mn, with the highest Mn concentration, as compared to the 0.2 µM Mn treatment. The obtained results led to the conclusion that the supply of Mn could enhance the concentration of some biologically active compounds in olives grown hydroponically, implying a critical need for further investigation of Mn fertilisation practices in the conventional olive farming system.

Extraction Kinetics of Total Polyphenols, Flavonoids, and Condensed Tannins of Lentil Seed Coat: Comparison of Solvent and Extraction Methods

The lentil seed coat is a waste by-product still rich in phenolic compounds, specifically condensed tannins. The effect of different solvents, as well as different processes, namely conventional solid-liquid extraction (CSLE) and ultrasound-assisted extraction (UAE), on the extraction yield of specific phenolic compound classes was studied. Four empirical two-parameter models were examined to select the one that better fit the experimental data obtained under different operating conditions. Additionally, ultra-high-pressure liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPLC-ESI/QTOF-MS) was employed to profile the phenolic compounds obtained under distinct extraction conditions. In the operative conditions adopted here, the bioactive compounds yield achieved using UAE was lower than that obtained with CSLE. The kinetics of polyphenols, flavonoids, and condensed tannins extraction from the lentil seed coat were successfully fitted to the power-law models, yielding mean values of the root mean square < 5.4%, standard error of estimation < 0.53, and coefficient of determination > 0.8. In addition, the UHPLC-ESI/QTOF-MS of the lentil seed coat extracts allowed the putative recognition of nearly 500 compounds, mainly flavonoids and phenolic acids.

Valorisation of Olea europaea L. Olive Leaves through the Evaluation of Their Extracts: Antioxidant and Antimicrobial Activity

Olea europaea L. leaves constitute a source of bioactive compounds with recognized benefits for both human health and technological purposes. In the present work, different extracts from olive leaves were obtained by the application of two extraction methods, Soxhlet and microwave-assisted extraction (MAE), and six solvents (distilled water, ethanolic and glycerol mixtures solvents). MAE was applied under 40, 60 and 80 °C for 3, 6.5 and 10 min. The effect of the extraction method, solvent and treatment factors (the latter in MAE) on the total phenol content (TPC), the antioxidant activity (AA) and the phenolic profile of the extracts were all evaluated. The extracts showed high values of TPC (up to 76.1 mg GAE/g DW) and AA (up to 78 mg TE/g DW), with oleuropein being the most predominant compound in all extracts. The Soxhlet extraction method exhibited better yields in TPC than in MAE, although both methods presented comparable AA values. The water MAE extract presented the strongest antimicrobial activity against five foodborne pathogens, with minimum inhibitory concentration (MIC) values ranging from 2.5 to 60 mg/mL. MAE water extract is proposed to be exploited in the food and nutraceutical industry in the frame of a sustainable economy.

Subcritical water as hydrolytic medium to recover and fractionate the protein fraction and phenolic compounds from craft brewer's spent grain

The valorization of the brewer's spent grain (BSG) generated in a craft beer industry was studied by subcritical water hydrolysis in a semi-continuous fixed-bed reactor. Temperature was varied from 125 to 185 °C at a constant flow rate of 4 mL/min. Biomass hydrolysis yielded a maximum of 78% of solubilized protein at 185 °C. Free amino acids presented a maximum level at 160 °C with a value of 55 mg free amino acids/g_protein-BSG. Polar amino acid presented a maximum at lower temperatures than non-polar amino acids. The maximum in total phenolic compounds was reached at 185 °C. This maximum is the same for aldehyde phenolic compounds such as vanillin, syringic and protocatechuic aldehyde; however, for hydroxycinnamic acids, such as ferulic acid and p-coumaric, the maximum was obtained at 160 °C. This allows a fractionation of the bioactive compounds. Subcritical water addresses opportunities for small breweries to be incorporated within the biorefinery concept.

Olive Fruit and Leaf Wastes as Bioactive Ingredients for Cosmetics-A Preliminary Study

Olea europaea cultivar, native in the Mediterranean basin, has expanded worldwide, mainly due to the olive oil industry. This expansion is attributed to the benefits of olive oil consumption, since this product is rich in nutritional and bioactive compounds. However, the olive industry generates high amounts of wastes, which could be related to polluting effects on soil and water. To minimize the environmental impact, different strategies of revalorization have been proposed. In this sense, the aim of this work was to develop high cosmetic value added oleuropein-enriched extracts (O20 and O30), a bioactive compound from olive byproducts, performing a comprehensive characterization using high performance liquid chromatography coupled to mass spectrometry and evaluate their bioactivity by in vitro assays. A total of 49 compounds were detected, with oleuropein and its derivatives widely found in O30 extract, whereas iridoids were mainly detected in O20 extract. Moreover, 10 compounds were detected for the first time in olive leaves. Both extracts demonstrated strong antioxidant and antiradical activities, although O30 showed higher values. In addition, radical oxygen and nitrogen species scavenging and enzyme inhibition values were higher in O30, with the exception of HOCl and hyaluronidase inhibition assays. Regarding cell viability, olive byproduct extracts did not lead to a decrease in keratinocytes viability until 100 µg/mL. All data reported by the present study reflect the potential of industrial byproducts as cosmetic ingredients.