Evaluation of the utility of the Beta Human Liver Emulation System (BHLES) for CFSAN's regulatory toxicology program

Control Compounds for Preclinical Drug-Induced Liver Injury Assessment: Consensus-driven systematic review by the ProEuroDILI Network

BACKGROUND & AIMS

Idiosyncratic drug-induced liver injury (DILI) is a complex and unpredictable event caused by drugs, herbal or dietary supplements. Early identification of human hepatotoxicity at preclinical stages remains a major challenge, in which the selection of validated in vitro systems and test drugs has a significant impact. This systematic review analyzed the compounds used in hepatotoxicity assays and established a list of DILI positive and negative control drugs for validation of in vitro models of DILI, supported by literature and clinical evidence and endorsed by an expert committee from COST Action ProEuroDILI Network (CA17112).

METHODS

Following 2020 PRISMA guidelines, original research articles focusing on DILI which used in vitro human models and performed at least one hepatotoxicity assay with positive and negative control compounds, were included. Bias of the studies was assessed by a modified 'Toxicological Data Reliability Assessment Tool'.

RESULTS

51 studies (out of 2,936) met the inclusion criteria, with 30 categorized as reliable without restrictions. Although there was a broad consensus on positive compounds, the selection of negative compounds lacked clarity. 2D monoculture, short exposure times and cytotoxicity endpoints were the most tested, although there was no consensus on the drug concentrations.

CONCLUSIONS

The extensive analysis highlighted the lack of agreement on control compounds for in vitro DILI assessment. Following comprehensive in vitro and clinical data analysis together with input from the expert committee, an evidence-based consensus-driven list of 10 positive and negative drugs is proposed for validating in vitro models for improving preclinical drug safety testing regimes.

IMPACT AND IMPLICATIONS

Prediction of human toxicity early in the drug development process remains a major challenge. For this, human in vitro models are becoming increasingly important, however, the development of more physiologically relevant liver models and careful selection of control DILI+ and DILI- drugs are requisites to better predict DILI liability of new drug candidates. Thus, this systematic study holds critical implications for standardizing validation of new in vitro models for studying drug-induced liver injury (DILI). By establishing a consensus-driven list of positive and negative control drugs, the study provides a scientifically justified framework for enhancing the consistency of preclinical testing, thereby addressing a significant challenge in early hepatotoxicity identification. The results are of paramount importance to all the actors involved in the drug development process, offering a standardized approach to assess hepatotoxic risks. Practically, these findings can guide researchers in evaluating safety profiles of new drugs, refining in vitro models, and informing regulatory agencies on potential improvements to regulatory guidelines, ensuring a more systematic and efficient approach to drug safety assessment.

Beyond the hype and toward application: liver complex in vitro models in preclinical drug safety

INTRODUCTION

Drug induced Liver-Injury (DILI) is a leading cause of drug attrition and complex in vitro models (CIVMs), including three dimensional (3D) spheroids, 3D bio printed tissues and flow-based systems, could improve preclinical prediction. Although CIVMs have demonstrated good sensitivity and specificity in DILI detection their adoption remains limited.

AREAS COVERED

This article describes DILI, the challenges with its prediction and the current strategies and models that are being used. It reviews data from industry-FDA collaborations and strategic partnerships and finishes with an outlook of CIVMs in preclinical toxicity testing. Literature searches were performed using PubMed and Google Scholar while product information was collected from manufacturer websites.

EXPERT OPINION

Liver CIVMs are promising models for predicting DILI although, a decade after their introduction, routine use by the pharmaceutical industry is limited. To accelerate their adoption, several industry-regulator-developer partnerships or consortia have been established to guide the development and qualification. Beyond this, liver CIVMs should continue evolving to capture greater immunological mimicry while partnering with computational approaches to deliver systems that change the paradigm of predicting DILI.

Toxicokinetic analysis of the highly toxic nerve agent VX in commercially available multi-organ-chips - Ways to overcome compound absorption

Organ-on-a-chip technology is considered a next-generation platform in pharmacology and toxicology. Nevertheless, this novel technology still faces several challenges concerning the respective materials which are used for these microfluidic devices. Currently available organ-chips are most often based on polydimethylsiloxane (PDMS). However, this material has strong limitations regarding compound binding. The current study investigated options to reduce compound absorption of the highly toxic nerve agent VX (1000 µmol/L) in a commercially available organ-chip. In addition, surface effects on degradation products of VX were investigated. The alternative polymer cyclic olefin copolymers (CoC) showed significantly less compound absorption compared to PDMS. Furthermore, a coating of PDMS- and CoC-based chips was investigated. The biocompatible polymer polyethyleneimine (PEI) successfully modified PDMS and CoC surfaces and further reduced compound absorption. A previously examined VX concentration after 72 h of 141 ± 10 µmol/L VX could be increased to 442 ± 54 µmol/L. Finally, the respective concentrations of VX and degradation products accounted for > 90% of the initial concentration of 1000 µmol/L VX. The currently described surface modification might be a first step towards the optimization of organ-on-a-chip surfaces, facilitating a better comparability of different studies and results.

The suitability of a polydimethylsiloxane-based (PDMS) microfluidic two compartment system for the toxicokinetic analysis of organophosphorus compounds

Organ-on-a-chip platforms are an emerging technology in experimental and regulatory toxicology (species-specific differences, ethical considerations). They address gaps between in vivo and in vitro models. However, there are still certain limitations considering material, setup and applicability. The current study examined the suitability of a commercially available polydimethylsiloxane-based (PDMS) organ-chip for the toxicokinetic characterization of the highly toxic nerve agent VX and the organophosphate pesticide parathion. The respective concentrations of 1000 µmol/L and 100 µmol/L VX and parathion were chosen deliberately high in order to study concentrations even if high compound absorption by PDMS might occur. Neuronal and liver spheroids, totaling 2 × 106 cells were used to study concentration changes of VX and parathion. In addition, VX enantiomers were quantified. The current study suggests a significant absorption of VX, respectively parathion by PDMS. This might require future investigation of alternative materials or coatings to limit absorption for organophosphorus compounds in toxicokinetic studies.

Regulatory landscape of alternatives to animal testing in food safety evaluations with a focus on the western world

Traditional animal models are increasingly being replaced by new approach methodologies (NAMs) which focus on predicting toxicity of chemicals based on mechanistic data rather than apical endpoint data usually obtained from animal models. Beyond in vitro genetic tests, however, only a handful of NAMs have been successfully implemented in regulatory decision-making processes, mostly in the cosmetics and chemicals sector. Regulatory guidance on food safety testing in many jurisdictions still relies on data obtained from animal studies. This is due to the lack of validated models to predict systemic toxicity, which is essential to develop health-based guidance values for food additives. Other factors limiting the adoption of NAMs into food safety assessment include sector legislation lagging behind scientific progress, and lack of training and expertise to use the new models. While regulatory and industry bodies are working to combat these challenges, more needs to be done before these models can be used as standalone tools for regulatory decision-making. This review summarizes the current state and challenges of regulatory acceptance of NAMs for decision-making, and the efforts by governing bodies and industry to transition from animal testing for food safety assessments.

Alternatives to animal testing in toxicity testing: Current status and future perspectives in food safety assessments

The development of alternative methods to animal testing has gained great momentum since Russel and Burch introduced the "3Rs" concept of Reduction, Refinement, and Replacement of animals in safety testing in 1959. Several alternatives to animal testing have since been introduced, including but not limited to in vitro and in chemico test systems, in silico models, and computational models (e.g., [quantitative] structural activity relationship models, high-throughput screens, organ-on-chip models, and genomics or bioinformatics) to predict chemical toxicity. Furthermore, several agencies have developed robust integrated testing strategies to determine chemical toxicity. The cosmetics sector is pioneering the adoption of alternative methodologies for safety evaluations, and other sectors are aiming to completely abandon animal testing by 2035. However, beyond the use of in vitro genetic testing, agencies regulating the food industry have been slow to implement alternative methodologies into safety evaluations compared with other sectors; setting health-based guidance values for food ingredients requires data from systemic toxicity, and to date, no standalone validated alternative models to assess systemic toxicity exist. The abovementioned models show promise for assessing systemic toxicity with further research. In this paper, we review the current alternatives and their applicability and limitations in food safety evaluations.

Microfluidic Liver-on-a-Chip for Preclinical Drug Discovery

Drug discovery is an expensive, long, and complex process, usually with a high degree of uncertainty. In order to improve the efficiency of drug development, effective methods are demanded to screen lead molecules and eliminate toxic compounds in the preclinical pipeline. Drug metabolism is crucial in determining the efficacy and potential side effects, mainly in the liver. Recently, the liver-on-a-chip (LoC) platform based on microfluidic technology has attracted widespread attention. LoC systems can be applied to predict drug metabolism and hepatotoxicity or to investigate PK/PD (pharmacokinetics/pharmacodynamics) performance when combined with other artificial organ-on-chips. This review discusses the liver physiological microenvironment simulated by LoC, especially the cell compositions and roles. We summarize the current methods of constructing LoC and the pharmacological and toxicological application of LoC in preclinical research. In conclusion, we also discussed the limitations of LoC in drug discovery and proposed a direction for improvement, which may provide an agenda for further research.

Hepatotoxicity due to herbal dietary supplements: Past, present and the future

Dietary supplements (DS) constitute a widely used group of products comprising vitamin, mineral, and botanical extract formulations. DS of botanical or herbal origins (HDS) comprise nearly 30% of all DS and are presented on the market either as single plant extracts or multi-extract-containing products. Despite generally safe toxicological profiles of most products currently present on the market, rising cases of liver injury caused by HDS - mostly by multi-ingredient and adulterated products - are of particular concern. Here we discuss the most prominent historical cases of HDS-induced hepatotoxicty - from Ephedra to Hydroxycut and OxyELITE Pro-NF, as well as products with suspected hepatotoxicity that are either currently on or are entering the market. We further provide discussion on overcoming the existing challenges with HDS-linked hepatotoxicity by introduction of advanced in silico, in vitro, in vivo, and microphysiological system approaches to address the matter of safety of those products before they reach the market.

Liver-on-a-chip devices: the pros and cons of complexity

Physiologically relevant and broadly applicable liver cell culture platforms are of great importance in both drug development and disease modeling. Organ-on-a-chip systems offer a promising alternative to conventional, static two-dimensional (2-D) cultures, providing much-needed cues such as perfusion, shear stress, and three-dimensional (3-D) cell-cell communication. However, such devices cover a broad range of complexity both in manufacture and in implementation. In this review, we summarize the key features of the human liver that should be reflected in a physiologically relevant liver-on-a-chip model. We also discuss different material properties of importance in producing liver-on-a-chip devices and summarize recent and current progress in the field, highlighting different types of devices at different levels of complexity.

Co-Culture of Human Primary Hepatocytes and Nonparenchymal Liver Cells in the Emulate® Liver-Chip for the Study of Drug-Induced Liver Injury

Drug-induced liver injury (DILI) is a significant public health issue, but standard animal tests and clinical trials sometimes fail to predict DILI due to species differences and the relatively low number of human subjects involved in preapproval studies of a new drug, respectively. In vitro models have long been used to aid DILI prediction, with primary human hepatocytes (PHHs) being generally considered the gold standard. However, despite many efforts and decades of work, traditional culture methods have been unsuccessful in either fully preserving essential liver functions after isolation of PHHs or in emulating interactions between PHHs and hepatic nonparenchymal cells (NPCs), both of which are essential for the development of DILI under in vivo conditions. Recently, various liver-on-a-chip (Liver-Chip) systems have been developed to co-culture hepatocytes and NPCs in a three-dimensional environment on microfluidic channels, enabling better maintenance of primary liver cells and thus improved DILI prediction. The Emulate® Liver-Chip is a commercially available system that can recapitulate some in vivo DILI responses associated with certain compounds whose liver safety profile cannot be accurately evaluated using conventional approaches involving PHHs or animal models due to a lack of innate immune responses or species-dependent toxicity, respectively. Here, we describe detailed procedures for the use of Emulate® Liver-Chips for co-culturing PHHs and NPCs for the purpose of DILI evaluation. First, we describe the procedures for preparing the Liver-Chip. We then outline the steps needed for sequential seeding of PHHs and NPCs in the prepared Liver-Chips. Lastly, we provide a protocol for utilizing cells maintained in perfusion culture in the Liver-Chips to evaluate DILI, using acetaminophen as an example. In all, use of this system and the procedures described here allow better preservation of the functions of human primary liver cells, resulting in an improved in vitro model for DILI assessment. © 2022 Wiley Periodicals LLC. This article has been contributed to by US Government employees and their work is in the public domain in the USA. Basic Protocol 1: Liver-Chip preparation Basic Protocol 2: Seeding primary human hepatocytes and nonparenchymal cells on Liver-Chips Basic Protocol 3: Perfusion culture for the study of acetaminophen-induced liver injury.

Breakthroughs and Applications of Organ-on-a-Chip Technology

Organ-on-a-chip (OOAC) is an emerging technology based on microfluid platforms and in vitro cell culture that has a promising future in the healthcare industry. The numerous advantages of OOAC over conventional systems make it highly popular. The chip is an innovative combination of novel technologies, including lab-on-a-chip, microfluidics, biomaterials, and tissue engineering. This paper begins by analyzing the need for the development of OOAC followed by a brief introduction to the technology. Later sections discuss and review the various types of OOACs and the fabrication materials used. The implementation of artificial intelligence in the system makes it more advanced, thereby helping to provide a more accurate diagnosis as well as convenient data management. We introduce selected OOAC projects, including applications to organ/disease modelling, pharmacology, personalized medicine, and dentistry. Finally, we point out certain challenges that need to be surmounted in order to further develop and upgrade the current systems.