Construction of an extended range whole-cell tetracycline biosensor by use of thetet(M) resistance gene

Products from Photolysis Reactions of Tetracycline Mediated by Clay and Humic Substance Induce Contrasting Expressions of Target Resistance Genes

Phototransformation is a key process affecting the fate of many antibiotics in the environment, but little is known about whether their photoproducts exert selective pressure on bacteria by inducing antibiotic resistance genes (ARGs). Here, we examined the expression of tetracycline resistance gene tet(M) of a fluorescent Escherichia coli whole-cell bioreporter influenced by the phototransformation of tetracycline. The presence of suspended smectite clay (montmorillonite or hectorite, 1.75 g/L) or dissolved humic substance (Pahokee Peat humic acid or Pahokee peat fulvic acid, 10 mg C/L) in aqueous solutions markedly facilitated the transformation of tetracycline (initially at 400 μg/L) with half-life shortened by 1.4-2.6 times. Despite the similar phototransformation ratios (80-90%) of the total loaded tetracycline after 60 min irradiation, the decreased ratios of cell fluorescence intensity (which was proportional to the expression amount of ARG tet(M)) were much higher with the two clays (94 and 93%) than with the two humic substances (44 and 69%) when compared to the respective dark controls. As illustrated by mass spectroscopic and chemical analyses, tetracycline was proposed to be mainly transformed to amide (ineffective in inducing ARGs) with the presence of clays by reaction with self-photosensitized singlet oxygen (1O2), while the humic substances might catalyze the production of another two demethylated and/or deaminated compounds (still effective in inducing ARGs) in addition to the amide compound via reaction with triplet excited state dissolved organic matter (3DOM*). As clay minerals and humic substances are important soil constituents and ubiquitously present in surface environments, the observed clay and humic-dependent photooxidation pathways of tetracycline and the differing selective pressures of the associated products highlight the need for monitoring the transformation compounds of antibiotics and provide critical insight into the development of antibiotic treatment protocols.

Directed evolution of TetR for constructing sensitive and broad-spectrum tetracycline antibiotics whole-cell biosensor

Antibiotic abuse is the main reason for the drug resistance of pathogenic bacteria, posing a potential health risk. Antibiotic surveillance is critical for preventing antibiotic contamination. This study aimed to develop a sensitive and broad-spectrum whole-cell biosensor for tetracycline antibiotics (TCs) detection. Wild-type TCs-responsive biosensor was constructed by introducing a tetracycline operon into a sfGFP reporter plasmid. Using error-prone PCR, mutation libraries containing approximately 107 variants of the tetracycline repressor (TetR) gene were generated. The tigecycline-senstive mutants were isolated using high-throughput flow cytometric sorting. After 2 rounds of directed evolution, a mutant epS2-22 of TerR was isolated and assembled as a TCs biosensor. The epS2-22 biosensor was more sensitive and broad-spectrum than the wild-type biosensors. The detection limits of the epS2-22 biosensor for seven TCs were 4- to 62-fold lower than the wild-type biosensor (no response to tigecycline). Meanwhile, the epS2-22 biosensor had a shorter detection time and a stronger signal output than the wild type. In addition, the evolved epS2-22 biosensor showed excellent performance in detecting low traces of TCs in environmental water. These results suggest that directed evolution is a powerful tool for developing high-performance whole-cell biosensors, and the evolved epS2-22 biosensors have the potential for wider applications in real-world TCs detection.

Electrochemical Biosensors for the Detection of Antibiotics in Milk: Recent Trends and Future Perspectives

Antibiotics have emerged as ground-breaking medications for the treatment of infectious diseases, but due to the excessive use of antibiotics, some drugs have developed resistance to microorganisms. Because of their structural complexity, most antibiotics are excreted unchanged, polluting the water, soil, and natural resources. Additionally, food items are being polluted through the widespread use of antibiotics in animal feed. The normal concentrations of antibiotics in environmental samples typically vary from ng to g/L. Antibiotic residues in excess of these values can pose major risks the development of illnesses and infections/diseases. According to estimates, 300 million people will die prematurely in the next three decades (by 2050), and the WHO has proclaimed "antibiotic resistance" to be a severe economic and sociological hazard to public health. Several antibiotics have been recognised as possible environmental pollutants (EMA) and their detection in various matrices such as food, milk, and environmental samples is being investigated. Currently, chromatographic techniques coupled with different detectors (e.g., HPLC, LC-MS) are typically used for antibiotic analysis. Other screening methods include optical methods, ELISA, electrophoresis, biosensors, etc. To minimise the problems associated with antibiotics (i.e., the development of AMR) and the currently available analytical methods, electrochemical platforms have been investigated, and can provide a cost-effective, rapid and portable alternative. Despite the significant progress in this field, further developments are necessary to advance electrochemical sensors, e.g., through the use of multi-functional nanomaterials and advanced (bio)materials to ensure efficient detection, sensitivity, portability, and reliability. This review summarises the use of electrochemical biosensors for the detection of antibiotics in milk/milk products and presents a brief introduction to antibiotics and AMR followed by developments in the field of electrochemical biosensors based on (i) immunosensor, (ii) aptamer (iii) MIP, (iv) enzyme, (v) whole-cell and (vi) direct electrochemical approaches. The role of nanomaterials and sensor fabrication is discussed wherever necessary. Finally, the review discusses the challenges encountered and future perspectives. This review can serve as an insightful source of information, enhancing the awareness of the role of electrochemical biosensors in providing information for the preservation of the health of the public, of animals, and of our environment, globally.

Tetracycline accumulation in biofilms enhances the selection pressure on Escherichia coli for expression of antibiotic resistance

Microorganisms are present as either biofilm or planktonic species in natural and engineered environments. Little is known about the selection pressure emanating from exposure to sub-minimal inhibitory concentration of antibiotics on planktonic vs. biofilm bacteria. In this study, an E. coli bioreporter was used to develop biofilms on glass and high-density polyethylene (HDPE) surfaces, and compared with the corresponding planktonic bacteria in antibiotic resistance expression when exposed to a range of μg/L levels of tetracycline. The antibiotic resistance-associated fluorescence emissions from biofilm E. coli reached up to 1.6 times more than those from planktonic bacteria. The intensively developed biofilms on glass surfaces caused the embedded bacteria to experience higher selection pressure and express more antibiotic resistance than those on HDPE surfaces. The temporal pattern of fluorescence emissions from biofilm E. coli was consistent with the biofilm-developing processes during the experimental period. The increased expression of antibiotic resistance from biofilm bacteria could be attributed to the high affinity of tetracycline with extracellular polymeric substances (EPS). The enhanced accumulation of tetracycline in biofilms could exert higher selection pressure on the embedded bacteria. These results suggest that in many natural and engineered systems the higher antibiotic resistance in biofilm bacteria could be attributed partially to the retention antibiotics by the EPS in biofilms.

NaCl salinity enhances tetracycline bioavailability to Escherichia coli on agar surfaces

Soil salinity is a worldwide problem and is damaging soil functions. Meanwhile, increasing amounts of anthropogenic antibiotics are discharged to agricultural soils. Little is known about how soil salinity (e.g., NaCl) could influence the bioavailability of antibiotics to bacteria. In this study, a tetracycline-responsive Escherichia coli bioreporter grew on the surfaces of agar microcosms at the same tetracycline concentration (200 μg/L), but various NaCl concentrations (0.5-19.2 g/L) with estimated osmotic potential of -0.18 to -1.80 MPa, and agar content (0.3%-5%) with estimated intrinsic permeability of 38 to 32,928 nm². These agar microcosms mimicked very fine textured soils with a range of NaCl salinity. Increasing agar content lowered the intrinsic permeability hence decreasing tetracycline bioavailability to E. coli, due likely to the reduced mass transfer of tetracycline via water flow. Intriguingly, tetracycline bioavailability increased with increasing NaCl concentration which caused the increase in osmotic stress. This is contradictory to the notion that osmotic stress reduces bacterial chemical uptake. Further analysis of E. coli membrane integrity demonstrated that the enhanced tetracycline bioavailability to bacteria could result from the compromised cell membranes and enhanced membrane permeability at higher NaCl salinity. Overall, this study suggests that high soil salinity (NaCl) may enhance the selection pressure exerted by antibiotics on bacteria.

Assessment of Bioavailability of Biochar-Sorbed Tetracycline to Escherichia coli for Activation of Antibiotic Resistance Genes

Human overuse and misuse of antibiotics have caused the wide dissemination of antibiotics in the environment, which has promoted the development and proliferation of antibiotic resistance genes (ARGs) in soils. Biochar (BC) with strong sorption affinity to many antibiotics is considered to sequester antibiotics and hence mitigate their impacts to bacterial communities in soils. However, little is known about whether BC-sorbed antibiotics are bioavailable and exert selective pressure on soil bacteria. In this study, we probed the bioavailability of tetracycline sorbed by BCs prepared from rice-, wheat-, maize-, and bean-straw feedstock using Escherichia coli MC4100/pTGM bioreporter strain. The results revealed that BC-sorbed tetracycline was still bioavailable to the E. coli attached to BC surfaces. Tetracycline sorbed by BCs prepared at 400 °C (BC400) demonstrated a higher bioavailability to bacteria compared to that sorbed by BCs prepared at 500 °C (BC500). Tetracycline could be sorbed primarily in the small pores of BC500 where bacteria could not access due to the size exclusion to bacteria. In contrast, tetracycline could be sorbed mainly on BC400 surfaces where bacteria could conveniently access tetracycline. Increasing the ambient humidity apparently enhanced the bioavailability of BC400-sorbed tetracycline. BC500-sorbed tetracycline exposed to varying levels of ambient humidity showed no significant changes in bioavailability, indicating that water could not effectively mobilize tetracycline from BC500 pores to surfaces where bacteria could access tetracycline. The results from this study suggest that BCs prepared at a higher pyrolysis temperature could be more effective to sequester tetracycline and mitigate the selective pressure on soil bacteria.

Development of an epigenetic tetracycline sensor system based on DNA methylation

Bacterial live cell sensors are potentially powerful tools for the detection of environmental toxins. In this work, we have established and validated a flow cytometry readout for an existing bacterial arabinose sensor system with DNA methylation based memory function (Maier et al., 2017, Nat. Comm., 8:15336). Flow cytometry readout is convenient and enables a multiparameter analysis providing information about single-cell variability, which is beneficial for further development of sensor systems of this type in the future. We then designed a tetracycline sensor system, because of the importance of antibiotics pollution in the light of multi-resistant pathogens. To this end, a tetracycline trigger plasmid was constructed by replacing the araC repressor gene and the ara operator of the arabinose trigger plasmid with the tetR gene coding for the tetracycline repressor and the tet operon. After combination with the memory plasmid, the tetracycline sensor system was shown to be functional in E. coli allowing to detect and memorize the presence of tetracycline. Due to a positive feedback between the trigger and memory systems, the combined whole-cell biosensor showed a very high sensitivity for tetracycline with a detection threshold at 0.1 ng/ml tetracycline, which may be a general property of sensors of this type. Moreover, acute presence of tetracycline and past exposure can be detected by this sensor using the dual readout of two reporter fluorophores.

Methods for field measurement of antibiotic concentrations: limitations and outlook

The growing prevalence of antibiotic resistance poses an increasingly serious threat to human health. Although an important driver of antibiotic resistance is the continuous exposure of bacteria to sublethal concentrations of antibiotics in natural environments, antibiotic pollutants are not currently tracked globally or systematically. This limits the international capacity to address the rise of antibiotic resistance at its source. To address this lack of data, the development of methods to measure antibiotic concentrations on-site is essential. These methods, ideally, must be sensitive to sublethal concentrations of antibiotics and require minimal technical expertise. Furthermore, factors such as cost, selectivity, biosafety and the ability to multiplex must be evaluated in the context of field use. Based on these criteria, we provide a critical review of current methods in antibiotic detection and evaluate their adaptability for use on-site. We categorize these methods into microbiological assays, physical and chemical assays, immunoassays, aptasensors and whole-cell biosensors. We recommend continued development of a dipstick or microfluidics approach with a bacterial promoter-based mechanism and colorimetric output. This technique would incorporate the advantageous aspects of existing methods, maximize shelf-life and ease-of-use, and require minimal resources to implement in the field.

Bioavailability of tetracycline to antibiotic resistant Escherichia coli in water-clay systems

Tetracyclines are a class of antimicrobials frequently found in the environment, and have promoted the proliferation of antibiotic resistance. An unanswered research question is whether tetracycline sorbed to soils is still bioavailable to bacteria and exerts selective pressure on the bacterial community for the development of antibiotic resistance. In this study, bioreporter E. coli MC4100/pTGM strain was used to probe the bioavailability of tetracycline sorbed by smectite clay, a class of common soil minerals. Batch sorption experiments were conducted to prepare clay samples with a wide range of sorbed tetracycline concentration. The bioreporter was incubated with tetracycline-sorbed clay at different clay/solution ratios and water contents, as well as using dialysis tubings to prevent the direct contact between bacterial cells and clay particles. The expression of antibiotic resistance genes from the bioreporter was measured using a flow cytometer as a measurement of bioavailability/selective pressure. The direct contact of bioreporter cells to clay surfaces represented an important pathway facilitating bacterial access to clay-sorbed tetracycline. In clay-water suspensions, reducing solution volume rendered more bacteria to attach to clay surfaces enhancing the bioavailability of clay-sorbed tetracycline. The strong fluorescence emission from bioreporter cells on clay surfaces indicated that clay-sorbed tetracycline was still bioavailable to bacteria. The formation of biofilms on clay surfaces could increase bacterial access to clay-sorbed tetracycline. In addition, desorption of loosely sorbed tetracycline into bulk solution contributed to bacterial exposure and activation of the antibiotic resistance genes. Tetracycline sorbed by soil geosorbents could exert selective pressure on the surrounding microbial communities via bacterial exposure to tetracycline in solution from desorption and to the geosorbent-sorbed tetracycline as well.

Harnessing a previously unidentified capability of bacterial allosteric transcription factors for sensing diverse small molecules in vitro

A plethora of bacterial allosteric transcription factors (aTFs) have been identified to sense a variety of small molecules. Introduction of a novel aTF-based approach to sense diverse small molecules in vitro will signify a broad series of detection applications. Here, we found that aTFs could interact with their nicked DNA binding sites. Building from this new finding, we designed and implemented a novel aTF-based nicked DNA template-assisted signal transduction system (aTF-NAST) by using the competition between aTFs and T4 DNA ligase to bind to the nicked DNA. This aTF-NAST could reliably and modularly transduce the signal of small molecules recognized by aTFs to the ligated DNA signal, thus enabling the small molecules to be measured via various mature and robust DNA detection methods. Coupling this aTF-NAST with three DNA detection methods, we demonstrated nine novel biosensors for the detection of an antiseptic 4-hydroxybenzoic acid, a disease marker uric acid and an antibiotic tetracycline. These biosensors show impressive sensitivity and robustness in real-life analysis, highlighting the great potential of our aTF-NAST for biosensing applications.

Recent progress on cell-based biosensors for analysis of food safety and quality control

Food quality and safety has become a subject of major concern for authorities and professionals in the food supply chain. Rapid methods, particularly biosensors, have exceptional specificity and sensitivity, rapid response times, low cost, relatively compact size, and are user friendly to operate. Cell-based biosensors are portable, and provide the biological activity of the analyte suitable for an initial screening of food. In this overview, the utilization of cell-based biosensors for food safety and quality analyses, such as detecting toxins, foodborne pathogens, allergens, and evaluating toxicity and function are summarized. Our results will promote the future development of cell-based biosensors in the food field.

New methodologies in screening of antibiotic residues in animal-derived foods: Biosensors

Antibiotics are leading medicine asset for fighting against microbial infection, but also one of the important causes of death worldwide. Many antibiotics used as therapeutics and growth promotion agents in animals can lead to antibiotic residues in animal-derived food which harm the health of people. Hence, it is vital to screen antibiotic residues in animal derived foods. Typical methods for screening antibiotic residues are based on microbiological growth inhibition and immunological analyses. However these two methods have some disadvantages, such as poor sensitive, lack of specificity and etc. Therefore, it is necessary to develop simple, more efficient and high sensitive screening methods of antibiotic residues. These assays have been introduced for the screening of numerous food samples. Biosensors are emerging methods, applied in screening antibiotic residues in animal-derived foods. Two types of biosensors, whole-cell based biosensors and surface plasmon resonance-based sensors have been extensively used. Their advantages include portability, small sample requirement, high sensitivity and good specificity over the traditional screening methods.

Bioavailability of Soil-Sorbed Tetracycline to Escherichia coli under Unsaturated Conditions

Increasing concentrations of anthropogenic antibiotics in soils are partly responsible for the proliferation of bacterial antibiotic resistance. However, little is known about how soil-sorbed antibiotics exert selective pressure on bacteria in unsaturated soils. This study investigated the bioavailability of tetracycline sorbed on three soils (Webster clay loam, Capac sandy clay loam, and Oshtemo loamy sand) to a fluorescent Escherichia coli bioreporter under unsaturated conditions using agar diffusion assay, microscopic visualization, and model simulation. Tetracycline sorbed on the soils could be desorbed and become bioavailable to the E. coli cells at matric water potentials of -2.95 to -13.75 kPa. Bright fluorescent rings were formed around the tetracycline-loaded soils on the unsaturated agar surfaces, likely due to radial diffusion of tetracycline desorbed from the soils, tetracycline uptake by the E. coli cells, and its inhibition on E. coli growth, which was supported by the model simulation. The bioavailability of soil-sorbed tetracycline was much higher for the Oshtemo soil, probably due to faster diffusion of tetracycline in coarse-textured soils. Decreased bioavailability of soil-sorbed tetracycline at lower soil water potential likely resulted from reduced tetracycline diffusion in soil pore water at smaller matric potential and/or suppressed tetracycline uptake by E. coli at lower osmotic potential. Therefore, soil-sorbed tetracycline could still exert selective pressure on the exposed bacteria, which was influenced by soil physical processes controlled by soil texture and soil water potential.

Tetracyclines in Food and Feedingstuffs: From Regulation to Analytical Methods, Bacterial Resistance, and Environmental and Health Implications

Antibiotics are widely used as growth promoters in animal husbandry; among them, the tetracyclines are a chemical group of relevance, due to their wide use in agriculture, surpassing in quantities applied almost every other antibiotic family. Seeing the considerable amounts of tetracyclines used worldwide, monitoring of these antibiotics is paramount. Advances must be made in the analysis of antibiotics to assess correct usage and dosage of tetracyclines in food and feedstuffs and possible residues in pertinent environmental samples. The tetracyclines are still considered a clinically relevant group of antibiotics, though dissemination of tolerance and resistance determinants have limited their use. This review focuses on four different aspects: (i) tetracyclines, usage, dosages, and regulatory issues that govern their food-related application, with particular attention to the prohibitions and restrictions that several countries have enforced in recent years by agencies from both the United States and the European Union, (ii) analytical methods for tetracyclines, determination, and residues thereof in feedstuffs and related matrices with an emphasis on the most relevant and novel techniques, including both screening and confirmatory methods, (iii) tetracycline resistance and tetracycline-resistant bacteria in feedstuff, and (iv) environmental and health risks accompanying the use of tetracyclines in animal nutrition. In the last two cases, we discuss the more relevant undesirable effects that tetracyclines exert over bacterial communities and nontarget species including unwanted effects in farmers.

Toxicity assessment using different bioassays and microbial biosensors

Toxicity assessment of water streams, wastewater, and contaminated sediments, is a very important part of environmental pollution monitoring. Evaluation of biological effects using a rapid, sensitive and cost effective method can indicate specific information on ecotoxicity assessment. Recently, different biological assays for toxicity assessment based on higher and lower organisms such as fish, invertebrates, plants and algal cells, and microbial bioassays have been used. This review focuses on microbial biosensors as an analytical device for environmental, food, and biomedical applications. Different techniques which are commonly used in microbial biosensing include amperometry, potentiometry, conductometry, voltammetry, microbial fuel cells, fluorescence, bioluminescence, and colorimetry. Examples of the use of different microbial biosensors in assessing a variety of environments are summarized.

Tetracycline tethered to titanium inhibits colonization by Gram-negative bacteria

As peri-prosthetic infection is one of the most devastating complications associated with implant placement, we have reasoned that such infection can be largely subverted by development of antibacterial implants. Our previous work demonstrated that covalent coupling of vancomycin to titanium alloy prevented colonization by the Gram-positive pathogens, Staphylococcus aureus and Staphylococcus epidermidis. Some orthopedic devices, including permanent prosthesis anchors, and most dental implants are transcutaneous or transmucosal and can be prone to colonization by Gram-negative pathogens. We report here the successful covalent coupling of the broad-spectrum antibiotic, tetracycline (TET), to titanium surfaces (Ti-TET) to retard Gram-negative colonization. Synthetic progress was followed by changes in water contact angle, while the presence of TET was confirmed by immunofluorescence. Ti-TET actively prevented colonization in the presence of bathing Escherichia coli, both by fluorescence microscopy and direct counting. Finally, the Ti-TET surface supported osteoblastic cell adhesion and proliferation over a 72-h period. Thus, this new surface offers a powerful means to protect transcutaneous implants from adhesion of Gram-negative pathogens, decreasing the need for replacement of this hardware.

Influence of Dissolved Organic Matter on Tetracycline Bioavailability to an Antibiotic-Resistant Bacterium

Complexation of tetracycline with dissolved organic matter (DOM) in aqueous solution could alter the bioavailability of tetracycline to bacteria, thereby alleviating selective pressure for development of antibiotic resistance. In this study, an Escherichia coli whole-cell bioreporter construct with antibiotic resistance genes coupled to green fluorescence protein was exposed to tetracycline in the presence of DOM derived from humic acids. Complexation between tetracycline and DOM diminished tetracycline bioavailability to E. coli, as indicated by reduced expression of antibiotic resistance genes. Increasing DOM concentration resulted in decreasing bioavailability of tetracycline to the bioreporter. Freely dissolved tetracycline (not complexed with DOM) was identified as the major fraction responsible for the rate and magnitude of antibiotic resistance genes expressed. Furthermore, adsorption of DOM on bacterial cell surfaces inhibited tetracycline diffusion into the bioreporter cells. The magnitude of the inhibition was related to the amount of DOM adsorbed and tetracycline affinity for the DOM. These findings provide novel insights into the mechanisms by which the bioavailability of tetracycline antibiotics to bacteria is reduced by DOM present in water. Agricultural lands receiving livestock manures commonly have elevated levels of both DOM and antibiotics; the DOM could suppress the bioavailability of antibiotics, hence reducing selective pressure on bacteria for development of antibiotic resistance.

Organic acids enhance bioavailability of tetracycline in water to Escherichia coli for uptake and expression of antibiotic resistance

Tetracyclines are a large class of antimicrobials used most extensively in livestock feeding operations. A large portion of tetracyclines administered to livestock is excreted in manure and urine which is collected in waste lagoons. Subsequent land application of these wastes introduces tetracyclines into the soil environment, where they could exert selective pressure for the development of antibiotic resistance genes in bacteria. Tetracyclines form metal-complexes in natural waters, which could reduce their bioavailability for bacterial uptake. We hypothesized that many naturally-occurring organic acids could effectively compete with tetracyclines as ligands for metal cations, hence altering the bioavailability of tetracyclines to bacteria in a manner that could enhance the selective pressure. In this study, we investigated the influence of acetic acid, succinic acid, malonic acid, oxalic acid and citric acid on tetracycline uptake from water by Escherichia coli bioreporter construct containing a tetracycline resistance gene which induces the emission of green fluorescence when activated. The presence of the added organic acid ligands altered tetracycline speciation in a manner that enhanced tetracycline uptake by E. coli. Increased bacterial uptake of tetracycline and concomitant enhanced antibiotic resistance response were quantified, and shown to be positively related to the degree of organic acid ligand complexation of metal cations in the order of citric acid > oxalic acid > malonic acid > succinic acid > acetic acid. The magnitude of the bioresponse increased with increasing aqueous organic acid concentration. Apparent positive relation between intracellular tetracycline concentration and zwitterionic tetracycline species in aqueous solution indicates that (net) neutral tetracycline is the species which most readily enters E. coli cells. Understanding how naturally-occurring organic acid ligands affect tetracycline speciation in solution, and how speciation influences tetracycline uptake by bacteria, allows more accurate assessment of the selective pressure from trace levels of antibiotics in the environment on microbial communities for preserving and developing antibiotic resistance.

Biosensors, antibiotics and food

Antibiotics are medicine's leading asset for fighting microbial infection, which is one of the leading causes of death worldwide. However, the misuse of antibiotics has led to the rapid spread of antibiotic resistance among bacteria and the development of multiple resistant pathogens. Therefore, antibiotics are rapidly losing their antimicrobial value. The use of antibiotics in food production animals is strictly controlled by the European Union (EU). Veterinary use is regulated to prevent the spread of resistance. EU legislation establishes maximum residue limits for veterinary medicinal products in foodstuffs of animal origin and enforces the establishment and execution of national monitoring plans. Among samples selected for monitoring, suspected noncompliant samples are screened and then subjected to confirmatory analysis to establish the identity and concentration of the contaminant. Screening methods for antibiotic residues are typically based on microbiological growth inhibition, whereas physico-chemical methods are used for confirmatory analysis. This chapter discusses biosensors, especially whole-cell based biosensors, as emerging screening methods for antibiotic residues. Whole-cell biosensors can offer highly sensitive and specific detection of residues. Applications demonstrating quantitative analysis and specific analyte identification further improve their potential as screening methods.

Role of tetracycline speciation in the bioavailability to Escherichia coli for uptake and expression of antibiotic resistance

Tetracycline contains ionizable functional groups that manifest several species with charges at different locales and differing net charge; the fractional distribution of each species depends on pH-pKa relationship in the aqueous phase. In nature, these species interact with naturally abundant cations (e.g., Ca(2+) and Mg(2+)) to form metal-tetracycline complexes in water. In this study, we used Escherichia coli MC4100/pTGM whole-cell bioreporter to investigate tetracycline uptake from solution under varying conditions of pH, salt composition and concentration by quantifying the corresponding expression of antibiotic resistance gene. The expression of antibiotic resistance gene in the E. coli bioreporter responded linearly to intracellular tetracycline concentration. Less tetracycline entered E. coli cells at solution pH of 8.0 than at pH 6.0 or 7.0 indicating reduced bioavailability of the antibiotic at higher pH. Both Mg(2+) and Ca(2+) in solution formed metal-tetracycline complexes which reduced uptake of tetracycline by E. coli hence diminishing the bioresponse. Among the various tetracycline species present in solution, including both metal-complexed and free (noncomplexed) species, zwitterionic tetracycline was identified as the predominant species that most readily passed through the cell membrane eliciting activation of the antibiotic resistance gene in E. coli. The results indicate that the same total concentration of tetracycline in ambient solution can evoke very different expression of antibiotic resistance gene in the exposed bacteria due to differential antibiotic uptake. Accordingly, geochemical factors such as pH and metal cations can modulate the selective pressure exerted by tetracycline for development and enrichment of antibiotic resistant bacteria. We suggest that tetracycline speciation analysis should be incorporated into the risk assessment framework for evaluating environmental exposure and the corresponding development of antibiotic resistance.

The application of Tet repressor in prokaryotic gene regulation and expression

Inducible gene expression based upon Tet repressor (tet regulation) is a broadly applied tool in molecular genetics. In its original environment, Tet repressor (TetR) negatively controls tetracycline (tc) resistance in bacteria. In the presence of tc, TetR is induced and detaches from its cognate DNA sequence tetO, so that a tc antiporter protein is expressed. In this article, we provide a comprehensive overview about tet regulation in bacteria and illustrate the parameters of different regulatory architectures. While some of these set-ups rely on natural tet-control regions like those found on transposon Tn10, highly efficient variations of this system have recently been adapted to different Gram-negative and Gram-positive bacteria. Novel tet-controllable artificial or hybrid promoters were employed for target gene expression. They are controlled by regulators expressed at different levels either in a constitutive or in an autoregulated manner. The resulting tet systems have been used for various purposes. We discuss integrative elements vested with tc-sensitive promoters, as well as tet regulation in Gram-negative and Gram-positive bacteria for analytical purposes and for protein overproduction. Also the use of TetR as an in vivo biosensor for tetracyclines or as a regulatory device in synthetic biology constructs is outlined. Technical specifications underlying different regulatory set-ups are highlighted, and finally recent developments concerning variations of TetR are presented, which may expand the use of prokaryotic tet systems in the future.