Tissue engineering of reproductive tissues and organs

microRNA-181a-5p promotes fibroblast differentiation of mesenchymal stem cells in rats with pelvic floor dysfunction

The use of stem cells capable of multilineage differentiation in treating Pelvic Floor Dysfunction (PFD) holds great promise since they are susceptible to entering connective tissue of various cell types and repairing damaged tissues. This research investigated the effect of microRNA-181a-5p (miR-181a-5p) on Bone Marrow Mesenchymal Stem Cells (BMSCs) in rats with PFD. BMSCs were transfected and analyzed for their fibroblast differentiation ability. miR-181a-5p, MFN1, and fibroblast-related genes were quantitatively analyzed. Whether MFN1 is a target gene of miR-181a-5p was predicted and confirmed. The efficacy of BMSCs in vivo rats with PFD was evaluated by measuring Leak Point Pressure (LPP), Conscious Cystometry (CMG), hematoxylin and eosin staining, and Masson staining. The present results discovered that miR-181a-5p was up-regulated and MFN1 was down-regulated during the differentiation of BMSCs into fibroblasts. Fibroblast differentiation of BMSCs was promoted after miR-181a-5p was induced or MFN1 was suppressed, but it was suppressed after miR-181a-5p was silenced. miR-181a-5p improved LPP and conscious CMG outcomes in PDF rats by targeting MFN1 expression, thereby accelerating fibroblast differentiation of BMSCs. In brief, miR-181a-5p induces fibroblast differentiation of BMSCs in PDF rats by MFN1, potentially targeting PDF therapeutics.

A Review: Biomechanical Aspects of the Fallopian Tube Relevant to its Function in Fertility

The fallopian tube (FT) plays a crucial role in the reproductive process by providing an ideal biomechanical and biochemical environment for fertilization and early embryo development. Despite its importance, the biomechanical functions of the FT that originate from its morphological aspects, and ultrastructural aspects, as well as the mechanical properties of FT, have not been studied nor used sufficiently, which limits the understanding of fertilization, mechanotrasduction, and mechanobiology during embryo development, as well as the replication of the FT in laboratory settings for infertility treatments. This paper reviews and revives valuable information on human FT reported in medical literature in the past five decades relevant to the biomechanical aspects of FT. In this review, we summarized the current state of knowledge concerning the morphological, ultrastructural aspects, and mechanical properties of the human FT. We also investigate the potential arising from a thorough consideration of the biomechanical functions and exploring often neglected mechanical aspects. Our investigation encompasses both macroscopic measurements (such as length, diameter, and thickness) and microscopic measurements (including the height of epithelial cells, the percentage of ciliated cells, cilia structure, and ciliary beat frequency). Our primary focus has been on healthy women of reproductive age. We have examined various measurement techniques, encompassing conventional metrology, 2D histological data as well as new spatial measurement techniques such as micro-CT.

Advances in Microgravity Directed Tissue Engineering

Tissue engineering aims to generate functional biological substitutes to repair, sustain, improve, or replace tissue function affected by disease. With the rapid development of space science, the application of simulated microgravity has become an active topic in the field of tissue engineering. There is a growing body of evidence demonstrating that microgravity offers excellent advantages for tissue engineering by modulating cellular morphology, metabolism, secretion, proliferation, and stem cell differentiation. To date, there have been many achievements in constructing bioartificial spheroids, organoids, or tissue analogs with or without scaffolds in vitro under simulated microgravity conditions. Herein, the current status, recent advances, challenges, and prospects of microgravity related to tissue engineering are reviewed. Current simulated-microgravity devices and cutting-edge advances of microgravity for biomaterials-dependent or biomaterials-independent tissue engineering to offer a reference for guiding further exploration of simulated microgravity strategies to produce engineered tissues are summarized and discussed.

Extracellular Matrix-Based and Electrospun Scaffolding Systems for Vaginal Reconstruction

Congenital vaginal anomalies and pelvic organ prolapse affect different age groups of women and both have significant negative impacts on patients' psychological well-being and quality of life. While surgical and non-surgical treatments are available for vaginal defects, their efficacy is limited, and they often result in long-term complications. Therefore, alternative treatment options are urgently needed. Fortunately, tissue-engineered scaffolds are promising new treatment modalities that provide an extracellular matrix (ECM)-like environment for vaginal cells to adhere, secrete ECM, and be remodeled by host cells. To this end, ECM-based scaffolds or the constructs that resemble ECM, generated by self-assembly, decellularization, or electrospinning techniques, have gained attention from both clinicians and researchers. These biomimetic scaffolds are highly similar to the native vaginal ECM and have great potential for clinical translation. This review article aims to discuss recent applications, challenges, and future perspectives of these scaffolds in vaginal reconstruction or repair strategies.

Tissue Engineering Neovagina for Vaginoplasty in Mayer-Rokitansky-Küster-Hauser Syndrome and Gender Dysphoria Patients: A Systematic Review

Background: Vaginoplasty is a surgical solution to multiple disorders, including Mayer-Rokitansky-Küster-Hauser syndrome and male-to-female gender dysphoria. Using nonvaginal tissues for these reconstructions is associated with many complications, and autologous vaginal tissue may not be sufficient. The potential of tissue engineering for vaginoplasty was studied through a systematic bibliography search. Cell types, biomaterials, and signaling factors were analyzed by investigating advantages, disadvantages, complications, and research quantity. Search Methods: A systematic search was performed in Medline, EMBASE, Web of Science, and Scopus until March 8, 2022. Term combinations for tissue engineering, guided tissue regeneration, regenerative medicine, and tissue scaffold were applied, together with vaginoplasty and neovagina. The snowball method was performed on references and a Google Scholar search on the first 200 hits. Original research articles on human and/or animal subjects that met the inclusion (reconstruction of vaginal tissue and tissue engineering method) and no exclusion criteria (not available as full text; written in foreign language; nonoriginal study article; genital surgery other than neovaginal reconstruction; and vaginal reconstruction with autologous or allogenic tissue without tissue engineering or scaffold) were assessed. The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) checklist, the Newcastle-Ottawa Scale, and the Gold Standard Publication Checklist were used to evaluate article quality and bias. Outcomes: A total of 31 out of 1569 articles were included. Data extraction was based on cell origin and type, biomaterial nature and composition, host species, number of hosts and controls, neovaginal size, replacement fraction, and signaling factors. An overview of used tissue engineering methods for neovaginal formation was created, showing high variance of cell types, biomaterials, and signaling factors and the same topics were rarely covered multiple times. Autologous vaginal cells and extracellular matrix-based biomaterials showed preferential properties, and stem cells carry potential. However, quality confirmation of orthotopic cell-seeded acellular vaginal matrix by clinical trials is needed as well as exploration of signaling factors for vaginoplasty. Impact statement General article quality was weak to sufficient due to unreported cofounders and incomplete animal study descriptions. Article quality and heterogenicity made identification of optimal cell types, biomaterials, or signaling factors unreliable. However, trends showed that autologous cells prevent complications and compatibility issues such as healthy cell destruction, whereas stem cells prevent cross talk (interference of signaling pathways by signals from other cell types) and rejection (but need confirmation testing beyond animal trials). Natural (orthotopic) extracellular matrix biomaterials have great preferential properties that encourage future research, and signaling factors for vascularization are important for tissue engineering of full-sized neovagina.

3D bioprinting of a gelatin-alginate hydrogel for tissue-engineered hair follicle regeneration

Hair follicle (HF) regeneration remains challenging, principally due to the absence of a platform that can successfully generate the microenvironmental cues of hair neogenesis. Here, we demonstrate a 3D bioprinting technique based on a gelatin/alginate hydrogel (GAH) to construct a multilayer composite scaffold simulating the HF microenvironment in vivo. Fibroblasts (FBs), human umbilical vein endothelial cells (HUVECs), dermal papilla cells (DPCs), and epidermal cells (EPCs) were encapsulated in GAH (prepared from a mixture of gelatin and alginate) and respectively 3D-bioprinted into the different layers of a composite scaffold. The bioprinted scaffold with epidermis- and dermis-like structure was subsequently transplanted into full-thickness wounds in nude mice. The multilayer scaffold demonstrated suitable cytocompatibility and increased the proliferation ability of DPCs (1.2-fold; P < 0.05). It also facilitated the formation of self-aggregating DPC spheroids and restored DPC genes associated with hair induction (ALP, β-catenin, and α-SMA). The dermal and epidermal cells self-assembled successfully into immature HFs in vitro. HFs were regenerated in the appropriate orientation in vivo, which can mainly be attributed to the hierarchical grid structure of the scaffold and the dot bioprinting of DPCs. Our 3D printed scaffolds provide a suitable microenvironment for DPCs to regenerate entire HFs and could make a significant contribution in the medical management of hair loss. This method may also have broader applications in skin tissue (and appendage) engineering. STATEMENT OF SIGNIFICANCE: Hair loss remains a challenging clinical problem that influences quality of life. Three-dimensional (3D) bioprinting has become a useful tool for the fabrication of tissue constructs for transplantation and other biomedical applications. In this study, we used a 3D bioprinting technique based on a gelatin/alginate hydrogel to construct a multi-layer composite scaffold with cuticular and corium layers to simulate the microenvironment of dermal papilla cells (DPCs) in the human body. This new approach permits the controllable formation of self-aggregating spheroids of DPCs in a physiologically relevant extracellular matrix and the initiation of epidermal-mesenchymal interactions, which results in HF formation in vivo. The ability to regenerate entire HFs should have a significant impact on the medical management of hair loss.

Essentiality of Trace Elements in Pregnancy, Fertility, and Gynecologic Cancers-A State-of-the-Art Review

Gynecological neoplasms pose a serious threat to women's health. It is estimated that in 2020, there were nearly 1.3 million new cases worldwide, from which almost 50% ended in death. The most commonly diagnosed are cervical and endometrial cancers; when it comes to infertility, it affects ~48.5 million couples worldwide and the number is continually rising. Ageing of the population, environmental factors such as dietary habits, environmental pollutants and increasing prevalence of risk factors may affect the reproductive potential in women. Therefore, in order to identify potential risk factors for these issues, attention has been drawn to trace elements. Trace mineral imbalances can be caused by a variety of causes, starting with hereditary diseases, finishing with an incorrect diet or exposure to polluted air or water. In this review, we aimed to summarize the current knowledge regarding trace elements imbalances in the case of gynecologic cancers as well as female fertility and during pregnancy.

Epigallocatechin Gallate: The Emerging Wound Healing Potential of Multifunctional Biomaterials for Future Precision Medicine Treatment Strategies

Immediate treatment for cutaneous injuries is a realistic approach to improve the healing rate and minimise the risk of complications. Multifunctional biomaterials have been proven to be a potential strategy for chronic skin wound management, especially for future advancements in precision medicine. Hence, antioxidant incorporated biomaterials play a vital role in the new era of tissue engineering. A bibliographic investigation was conducted on articles focusing on in vitro, in vivo, and clinical studies that evaluate the effect and the antioxidants mechanism exerted by epigallocatechin gallate (EGCG) in wound healing and its ability to act as reactive oxygen species (ROS) scavengers. Over the years, EGCG has been proven to be a potent antioxidant efficient for wound healing purposes. Therefore, several novel studies were included in this article to shed light on EGCG incorporated biomaterials over five years of research. However, the related papers under this review's scope are limited in number. All the studies showed that biomaterials with scavenging ability have a great potential to combat chronic wounds and assist the wound healing process against oxidative damage. However, the promising concept has faced challenges extending beyond the trial phase, whereby the implementation of these biomaterials, when exposed to an oxidative stress environment, may disrupt cell proliferation and tissue regeneration after transplantation. Therefore, thorough research should be executed to ensure a successful therapy.

A three-dimensional bioprinting technique, based on a gelatin/alginate hydrogel, for the tissue engineering of hair follicle reconstruction

Hair loss remains a challenging clinical problem that influences the quality of life. Three-dimensional (3D) bioprinting has become a valuable tool for fabricating tissue constructs for transplantation and other biomedical applications. Although some simple organs, such as skin and cartilage, have been successfully simulated, it remains challenging to make hair follicles (HFs), which are highly complex organs. The tissue engineering of human HFs has been a long-standing challenge, and progress with this has lagged behind that with other lab-grown tissues. This is principally due to a lack of availability of a platform that can successfully recapitulate the microenvironmental cues required to maintain the requisite cellular interactions for hair neogenesis. In this study, we used a 3D bioprinting technique based on a gelatin/alginate hydrogel to construct a multilayer composite scaffold with cuticular and corium layers to simulate the microenvironment of dermal papilla cells (DPCs) in the human body. This new approach permits the controllable formation of self-aggregating spheroids of DPCs in a physiologically relevant extracellular matrix and the initiation of epidermal-mesenchymal interactions, which results in HF formation in vivo. In conclusion, our 3D-bioprinted multilayer composite scaffold prepared using a gelatin/alginate hydrogel provides a suitable 3D microenvironment for DPCs to induce HF formation. The ability to regenerate entire HFs should have a significant impact on the medical management of hair loss. This method may also have critical applications for skin tissue engineering, with its appendages, for other purposes.

Scaffold strategies combined with mesenchymal stem cells in vaginal construction: a review

Tissue engineering has provided new treatment alternatives for tissue reconstruction. Advances in the tissue engineering field have resulted in mechanical support and biological substitutes to restore, maintain or improve tissue/organs structures and functions. The application of tissue engineering technology in the vaginal reconstruction treatment can not only provide mechanical requirements, but also offer tissue repairing as an alternative to traditional approaches. In this review, we discuss recent advances in cell-based therapy in combination with scaffolds strategies that can potentially be adopted for gynaecological transplantation.

Human umbilical cord mesenchymal stem cells reconstruct the vaginal wall of ovariectomized Sprague-Dawley rats: implications for pelvic floor reconstruction

Vaginal structural defects are involved in pelvic organ prolapse (POP). We tested whether mesenchymal stem cell (MSC) therapy can repair the weakened vaginal wall of POP patients as a novel POP treatment. Ninety-six ovariectomized rats were divided into 4 groups (n = 24/group): saline (sal), collagen (col), sal + MSC, and col + MSC groups. Two weeks after ovariectomy, rats received subepithelial injection of 0.3 ml saline, 0.3 ml collagen I gel, and 0.3 ml saline: 3 × 10⁶ human umbilical cord mesenchymal stem cells (HUMSCs), or 0.3 ml collagen I gel: 3 × 10⁶ HUMSCs into the anterior vaginal wall. Eight additional rats underwent in vivo bioluminescence imaging (BLI) to evaluate in vivo cell viability. The BLI signal disappeared within 1 week after MSC injection, and no in vivo MSC differentiation was found. Collagen I content was significantly lower at 4 and 12 weeks in the two MSC groups than in the sal and col groups, while collagen III was significantly higher (P < 0.001). The fraction of smooth muscle in the nonvascular muscularis increased significantly in the two MSC groups at 12 weeks (P < 0.001). ACTA2 mRNA in the col + MSC group was significantly higher than that in the sal group at 2 and 4 weeks (P = 0.042 and P = 0.040). mRNA levels of angiogenic factors (bFGF or VEGF) in the two MSC groups were significantly higher than those in the sal and col groups at different time points. HUMSCs normalized the fibromuscular structures of the vaginal wall of ovariectomized rats potentially through a paracrine effect.

Novel Approaches in Addressing Ovarian Insufficiency in 2019: Are We There Yet?

Ovarian insufficiency is described as a multifaceted issue typically encountered in the field of assisted reproduction. The three main identified diagnoses of ovarian insufficiency include premature ovarian failure (POF), poor ovarian response (POR), and advanced maternal age (AMA). Patient heterogeneity in the era of individualized medicine drives research forward leading to the emergence of novel approaches. This plethora of innovative treatments in the service of adequately managing ovarian insufficiency is called to undertake the challenge of addressing infertile patients exploring their reproductive options. This review provides an all-inclusive presentation and critical analysis on novel treatments that have not achieved routine clinical practice status yet, but have recently emerged as promising. In light of the lack of randomized controlled trials conveying safety and efficiency, clinicians are left puzzled in addressing the "how" and "for whom" these approaches may be beneficial. From ovarian injection employing platelet-rich plasma (PRP) or stem cells to artificial gametes and ovaries, ovarian transplantation, and mitochondrial replacement therapy, this descriptive review provides insight toward assisting the practitioner in decision making regarding these cutting-edge treatments. Biological mechanisms, invasiveness levels, efficiency, as well as possible complications, the current status along with bioethical concerns are discussed in the context of identifying future optimal treatment.

Three-Dimensional Bioprinting Scaffolding for Nasal Cartilage Defects: A Systematic Review

BACKGROUND

In recent years, three-dimensional (3D)-printing of tissue-engineered cartilaginous scaffolds is intended to close the surgical gap and provide bio-printed tissue designed to fit the specific geometric and functional requirements of each cartilage defect, avoiding donor site morbidity and offering a personalizing therapy.

METHODS

To investigate the role of 3D-bioprinting scaffolding for nasal cartilage defects repair a systematic review of the electronic databases for 3D-Bioprinting articles pertaining to nasal cartilage bio-modelling was performed. The primary focus was to investigate cellular source, type of scaffold utilization, biochemical evaluation, histological analysis, in-vitro study, in-vivo study, animal model used, length of research, and placement of experimental construct and translational investigation.

RESULTS

From 1011 publications, 16 studies were kept for analysis. About cellular sources described, most studies used primary chondrocyte cultures. The cartilage used for cell isolation was mostly nasal septum. The most common biomaterial used for scaffold creation was polycaprolactone alone or in combination. About mechanical evaluation, we found a high heterogeneity, making it difficult to extract any solid conclusion. Regarding biological and histological characteristics of each scaffold, we found that the expression of collagen type I, collagen Type II and other ECM components were the most common patterns evaluated through immunohistochemistry on in-vitro and in-vivo studies. Only two studies made an orthotopic placement of the scaffolds. However, in none of the studies analyzed, the scaffold was placed in a subperichondrial pocket to rigorously simulate the cartilage environment. In contrast, scaffolds were implanted in a subcutaneous plane in almost all of the studies included.

CONCLUSION

The role of 3D-bioprinting scaffolding for nasal cartilage defects repair is growing field. Despite the amount of information collected in the last years and the first surgical applications described recently in humans. Further investigations are needed due to the heterogeneity on mechanical evaluation parameters, the high level of heterotopic scaffold implantation and the need for quantitative histological data.

Cell-based endometrial regeneration: current status and future perspectives

Endometrial-related disorders including Asherman's syndrome, thin endometrium, pelvic organ prolapse, and cesarean scar pregnancies can be accompanied by different symptoms such as amenorrhea, infertility, abnormal placental implantation and recurrent miscarriage. Different methods have been introduced to overcome these problems such as surgery and hormonal therapy but none of them has shown promising outcomes. On the other hand, the development of novel regenerative therapeutic strategies has opened new avenues for the treatment of endometrial-related deficiencies. In this regard, different types of scaffolds, acellular matrices and also cell therapy with adult or stem cells have been investigated for the treatment of endometrial-related deficiencies. In this paper, we review the current status of cell-based endometrium regeneration using scaffold dependent and scaffold-free methods and future perspectives in this field. Moreover, we discuss the endometrial diseases that can be candidates for cell-based treatments. Also, the cells with the potential for endometrial regeneration are explained.

Regenerative Medicine Approaches in Bioengineering Female Reproductive Tissues

Diseases, disorders, and dysfunctions of the female reproductive tract tissues can result in either infertility and/or hormonal imbalance. Current treatment options are limited and often do not result in tissue function restoration, requiring alternative therapeutic approaches. Regenerative medicine offers potential new therapies through the bioengineering of female reproductive tissues. This review focuses on some of the current technologies that could address the restoration of functional female reproductive tissues, including the use of stem cells, biomaterial scaffolds, bio-printing, and bio-fabrication of tissues or organoids. The use of these approaches could also be used to address issues in infertility. Strategies such as cell-based hormone replacement therapy could provide a more natural means of restoring normal ovarian physiology. Engineering of reproductive tissues and organs could serve as a powerful tool for correcting developmental anomalies. Organ-on-a-chip technologies could be used to perform drug screening for personalized medicine approaches and scientific investigations of the complex physiological interactions between the female reproductive tissues and other organ systems. While some of these technologies have already been developed, others have not been translated for clinical application. The continuous evolution of biomaterials and techniques, advances in bioprinting, along with emerging ideas for new approaches, shows a promising future for treating female reproductive tract-related disorders and dysfunctions.

Combating COVID-19 with tissue engineering: a review

The ongoing COVID-19 pandemic triggered by SARS-CoV-2 emerged from Wuhan, China, firstly in December 2019, as well spread to almost all around the world rapidly. The main reason why this disease spreads so many people in a short time is that the virus could be transmitted from an infected person to another by infected droplets. The new emergence of diseases usually may affect multiple organs; moreover, this disease is such an example. Numerous reported studies focus on acute or chronic organ damage caused by the virus. At this point, tissue engineering (TE) strategies can be used to treat the damages with its interdisciplinary approaches. Tissue engineers could design drug delivery systems, scaffolds, and especially biomaterials for the damaged tissue and organs. In this review, brief information about SARS-CoV-2, COVID-19, and epidemiology of the disease will be given at first. After that, the symptoms, the tissue damages in specific organs, and cytokine effect caused by COVID-19 will be described in detail. Finally, it will be attempted to summarize and suggest the appropriate treatments with suitable biomaterials for the damages via TE approaches. The aim of this review is to serve as a summary of currently available tissue damage treatments after COVID-19.

Tissue engineered endometrial barrier exposed to peristaltic flow shear stresses

Cyclic myometrial contractions of the non-pregnant uterus induce intra-uterine peristaltic flows, which have important roles in transport of sperm and embryos during early stages of reproduction. Hyperperistalsis in young females may lead to migration of endometrial cells and development of adenomyosis or endometriosis. We conducted an in vitro study of the biological response of a tissue engineered endometrial barrier exposed to peristaltic wall shear stresses (PWSSs). The endometrial barrier model was co-cultured of endometrial epithelial cells on top of myometrial smooth muscle cells (MSMCs) in custom-designed wells that can be disassembled for mechanobiology experiments. A new experimental setup was developed for exposing the uterine wall in vitro model to PWSSs that mimic the in vivo intra-uterine environment. Peristaltic flow was induced by moving a belt with bulges to deform the elastic cover of a fluid filled chamber that held the uterine wall model at the bottom. The in vitro biological model was exposed to peristaltic flows for 60 and 120 min and then stained for immunofluorescence studies of alternations in the cytoskeleton. Quantification of the F-actin mass in both layers revealed a significant increase with the length of exposure to PWSSs. Moreover, the inner layer of MSMCs that were not in direct contact with the fluid also responded with an increase in the F-actin mass. This new experimental approach can be expanded to in vitro studies of multiple structural changes and genetic expressions, while the tissue engineered uterine wall models are tested under conditions that mimic the in vivo physiological environment.

Novel therapeutic approaches of tissue engineering in male infertility

Male reproductive organ plays an important role in sperm production, maintenance and entry to the female reproductive tract, as well as generation and secretion of male sex hormones responsible for the health of male reproductive system. The purpose of this paper is to discuss the experimental and clinical evidence on the utilization of tissue engineering techniques in treating male infertility. Tissue engineering (TE) and regenerative medicine have developed new approaches to treat patients with reproductive disorders such as iatrogenic injuries, congenital abnormalities, and trauma. In some cases, including congenital defects and undescended testis or hypogonadism, the sperm samples are not retrieved. This makes TE a possible future strategy for restoration of male fertility. Here, we have summarized the recent advances in experimental and clinical application of cell-, tissue-, and organ-based regenerative medicine in male reproductive disorders.

Urethroplasty with a bilayered poly-D,L-lactide-co-ε-caprolactone scaffold seeded with allogenic mesenchymal stem cells

Reconstructive surgery for urethral defects employing tissue-engineered scaffolds represents an alternative treatment for urethroplasty. The aim of this study was to compare the therapeutic efficacy of the bilayer poly-D,L-lactide/poly-ε-caprolactone (PL-PC) scaffold seeded with allogenic mesenchymal stem cells (MSCs) for urethra reconstruction in a rabbit model with conventional urethroplasty employing an autologous buccal mucosa graft (BG). The inner layer of the scaffold based on poly-D,L-lactic acid (PL) was seeded with MSCs, while the outer layer, prepared from poly-ε-caprolactone, protected the surrounding tissues from urine. To track the MSCs in vivo, the latter were labeled with superparamagnetic iron oxide nanoparticles. In rabbits, a dorsal penile defect was reconstructed employing a BG or a PL-PC graft seeded with nanoparticle-labeled MSCs. In the 12-week follow-up period, no complications were detected. Subsequent histological analysis demonstrated biointegration of the PL-PC graft with surrounding urethral tissues. Less fibrosis and inflammatory cell infiltration were observed in the experimental group as compared with the BG group. Nanoparticle-labeled MSCs were detected in the urothelium and muscular layer, co-localizing with the urothelium cytokeratin marker AE1/AE3, indicating the possibility of MSC differentiation into neo-urothelium. Our results suggest that a bilayer MSCs-seeded scaffold could be efficiently employed for urethroplasty.

Novel approach for the assessment of ovarian follicles infiltration in polymeric electrospun patterned scaffolds

Reproductive tissue engineering (REPROTEN) has been recently defined as the application of the tissue engineering approach targeting reproductive organs and several research works are focusing on this novel strategy. Being still an innovative field, most of the scaffold characterization techniques suitable for other tissue targets give inappropriate results, and there is the need to evaluate and investigate novel approaches. In particular the focus of this paper is the evaluation of the infiltration of ovarian follicles inside patterned electrospun scaffolds. Beyond the standard techniques, for the first time the use of magnetic resonance imaging (MRI) for this purpose is proposed and specific protocols for scaffold preparation are reported. Positive results in terms of evaluation of scaffolds incorporating follicles confirm this technique as highly effective for further applications in this field.

Characterization, recellularization, and transplantation of rat decellularized testis scaffold with bone marrow-derived mesenchymal stem cells

BACKGROUND

Regenerative medicine potentially offers the opportunity for curing male infertility. Native extracellular matrix (ECM) creates a reconstruction platform to replace the organs. In this study, we aimed to evaluate the efficiency of the testis decellularized scaffold as a proper niche for stem cell differentiation toward testis-specific cell lineages.

METHODS

Rats' testes were decellularized by freeze-thaw cycle followed by immersion in deionized distilled water for 2 h, perfused with 1% Triton X-100 through ductus deferens for 4 h, 1% SDS for 48 h and 1% DNase for 2 h. The decellularized samples were prepared for further in vitro and in vivo analyses.

RESULT

Histochemical and immunohistochemistry studies revealed that ECM components such as Glycosaminoglycans (GAGs), neutral carbohydrate, elastic fibers, collagen I & IV, laminin, and fibronectin were well preserved, and the cells were completely removed after decellularization. Scanning electron microscopy (SEM) showed that 3D ultrastructure of the testis remained intact. In vivo and in vitro studies point out that decellularized scaffold was non-toxic and performed a good platform for cell division. In vivo implant of the scaffolds with or without mesenchymal stem cells (MSCs) showed that appropriate positions for transplantation were the mesentery and liver and the scaffolds could induce donor-loaded MSCs or host migrating cells to differentiate to the cells with phenotype of the sertoli- and leydig-like cells. The scaffolds also provide a good niche for migrating DAZL-positive cells; however, they could not differentiate into post meiotic-cell lineages.

CONCLUSION

The decellularized testis can be considered as a promising vehicle to support cell transplantation and may provide an appropriate niche for testicular cell differentiation.

Ayurveda and the science of aging

Since time immemorial, humanity has been concerned with developing and preserving youthful vigor, and extending longevity by stopping or delaying the aging process. By 2030, one in five of the world population will be over 65 years old. Longevity and old age are accompanied with a variety of health challenges and population studies indicate that the elderly will use between three to five times more healthcare services compared to the younger population. Modern medicine has made a great deal of progress in understanding the aging process and in controlling age-associated health issues including heart attacks, strokes, diabetes, cancer, senility, and arthritis. Thus, every individual is now looking forward to a youthful, productive lifespan of 100 or more years filled with unlimited health and opportunity. Research by aging experts is focused on ways to go against the natural order of the aging process in order to delay it. Interventions include among other things anti-aging pills, restricted food consumption and cloning body parts to stay young and delay biological aging. Ayurveda, one of the world's most authoritative mind-body-spirit medicinal systems, offers various concepts of the aging process. This system of medicine includes therapies for healthy aging so as to create an optimal health and lengthen an individual's healthspan by living in harmony with nature. This review will explore various aspects of aging and longevity by comparing the science of aging as defined by modern medicine with the Ayurvedic treatise of Jara and Vriddhavastha.

Anti-Inflamm-Ageing and/or Anti-Age-Related Disease Emerging Treatments: A Historical Alchemy or Revolutionary Effective Procedures?

The “long-life elixir” has long represented for humans a dream, a vanity's sin for remaining young and to long survive. Today, because of ageing population phenomenon, the research of antiageing interventions appears to be more important than ever, for preserving health in old age and retarding/or delaying the onset of age-related diseases. A hope is given by experimental data, which evidence the possibility of retarding ageing in animal models. In addition, it has been also demonstrated in animal life-extending studies not only the possibility of increasing longevity but also the ability to retard the onset of age-related diseases. Interestingly, this recent evidence is leading to promise of obtaining the same effects in humans and resulting in benefits for their health in old ages. In order to achieve this goal, different approaches have been used ranging from pharmacological targeting of ageing, basic biological assays, and big data analysis to the recent use of young blood, stem cells, cellular, genetic, and epigenetic reprogramming, or other techniques of regenerative medicine. However, only a little fraction of these approaches has the features for being tested in clinical applications. Here, new emerging molecules, drugs, and procedures will be described, by evidencing potential benefits and limitations.

Bioengineering Strategies to Treat Female Infertility

Bioengineering strategies have demonstrated enormous potential to treat female infertility as a result of chemotherapy, uterine injuries, fallopian tube occlusion, massive intrauterine adhesions, congenital uterine malformations, and hysterectomy. These strategies can be classified into two broad categories as follows: (i) Transplantation of fresh or cryopreserved organs into the host and (ii) tissue engineering approaches that utilize a combination of cells, growth factors, and biomaterials that leverages the body's inherent ability to regenerate/repair reproductive organs. While whole organ transplant has demonstrated success, the source of the organ and the immunogenic effects of allografts remain challenging. Even though tissue engineering strategies can avoid these issues, their feasibilities of creating whole organ constructs are yet to be demonstrated. In this article we summarize the recent advancements in the applications of bioengineering to treat female infertility.

Fibrin in Reproductive Tissue Engineering: A Review on Its Application as a Biomaterial for Fertility Preservation

In recent years, reproductive medicine has made good use of tissue engineering and regenerative medicine techniques to develop alternatives to restore fertility in cancer patients. For young female cancer patients who cannot undergo any of the currently applied strategies due to the possible presence of malignant cells in their ovaries, the challenge is creating an in vitro or in vivo artificial ovary using carefully selected biomaterials. Thanks to its numerous qualities, fibrin has been widely used as a scaffold material for fertility preservation applications. The goal of this review is to examine and discuss the applications and advantages of this biopolymer for fertility restoration in cancer patients, and consider the main results achieved so far.

Editor’s Pick: 3D Printing for Biomedical Applications: Where Are We Now?

Three-dimensional (3D) printing is an additive manufacturing process. This technology provides us with the opportunity to create 3D structures by adding material on a layer-by-layer basis, using different kinds of materials such as ceramics, metals, plastics, and polymers. Nowadays, tissue engineering investigations are taking place on a widespread basis in the fields of regeneration, restoration, or replacement of defective or injured functional living organs and tissues. For this reason, it is important to understand the basic concept of 3D bioprinting as a tool for producing a 3D structure combining living cells and biomaterials and controlling cell proliferation, attachment, and migration within 3D structures. There are a variety of applications for additive manufacturing printing technology available to surgeons at this moment, like scaled models for preoperative planning based prosthetics or custom implants and biocompatible scaffolds. Moreover, this technology can be used as a tool to improve surgical and medical education, by using simulation models and utilising its potential to replicate complex anatomy by employing distinct materials that mimic the characteristics of the native tissue in an effort to increase patient safety through repetition of common procedures.

Biomaterial Scaffolds for Reproductive Tissue Engineering

The reproductive system usually involves gamete producing gonads, a series of specialized ducts, accessory glands and the external genitalia. Despite there are many traditional methods such as hormonal and surgical approaches, at present no effective treatments exist to help patients suffering from serious diseases of reproductive system, including congenital and acquired abnormalities, malignant tumor, traumatic, infectious etiologies, inflammation and iatrogenic injuries. Tissue engineering holds promise for reproductive medicine through the development of biological alternative. Till now, a diverse range of biomaterials have been utilized as suitable substrates to match both the mechanical and biological context of reproductive tissues. The current review will focus mainly on the applications of biomaterial scaffolds and their major achievements in each region of reproductive systems.

Uterine Tissue Engineering and the Future of Uterus Transplantation

The recent successful births following live donor uterus transplantation are proof-of-concept that absolute uterine factor infertility is a treatable condition which affects several hundred thousand infertile women world-wide due to a dysfunctional uterus. This strategy also provides an alternative to gestational surrogate motherhood which is not practiced in most countries due to ethical, religious or legal reasons. The live donor surgery involved in uterus transplantation takes more than 10 h and is then followed by years of immunosuppressive medication to prevent uterine rejection. Immunosuppression is associated with significant adverse side effects, including nephrotoxicity, increased risk of serious infections, and diabetes. Thus, the development of alternative approaches to treat absolute uterine factor infertility would be desirable. This review discusses tissue engineering principles in general, but also details strategies on how to create a bioengineered uterus that could be used for transplantation, without risky donor surgery and any need for immunosuppression. We discuss scaffolds derived from decellularized organs/tissues which may be recellularized using various types of autologous somatic/stem cells, in particular for uterine tissue engineering. It further highlights the hurdles that lay ahead in developing an alternative to an allogeneic source for uterus transplantation.

MicroRNA-29 facilitates transplantation of bone marrow-derived mesenchymal stem cells to alleviate pelvic floor dysfunction by repressing elastin

Background

Pelvic floor dysfunction (PFD) is a condition affecting many women worldwide, with symptoms including stress urinary incontinence (SUI) and pelvic organ prolapse (POP). We have previously demonstrated stable elastin-expressing bone marrow-derived mesenchymal stem cells (BMSCs) attenuated PFD in rats, and aim to further study the effect of microRNA-29a-3p regulation on elastin expression and efficacy of BMSC transplantation therapy.

Methods

We inhibited endogenous microRNA-29a-3p in BMSCs and investigated its effect on elastin expression by RT-PCR and Western blot. MicroRNA-29-inhibited BMSCs were then transplanted into PFD rats, accompanied by sustained release of bFGF using formulated bFGF in poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NP), followed by evaluation of urodynamic tests.

Results

MicroRNA-29a-3p inhibition resulted in upregulated expression and secretion of elastin in in vitro culture of BMSCs. After co-injection with PLGA-loaded bFGF NP into the PFD rats in vivo, microRNA-29a-3p-inhibited BMSCs significantly improved the urodynamic test results.

Conclusions

Our multidisciplinary study, combining microRNA biology, genetically engineered BMSCs, and nanoparticle technology, provides an excellent stem cell-based therapy for repairing connective tissues and treating PFD.

Biodegradation and Osteosarcoma Cell Cultivation on Poly(aspartic acid) Based Hydrogels

Development of novel biodegradable and biocompatible scaffold materials with optimal characteristics is important for both preclinical and clinical applications. The aim of the present study was to analyze the biodegradability of poly(aspartic acid)-based hydrogels, and to test their usability as scaffolds for MG-63 osteoblast-like cells. Poly(aspartic acid) was fabricated from poly(succinimide) and hydrogels were prepared using natural amines as cross-linkers (diaminobutane and cystamine). Disulfide bridges were cleaved to thiol groups and the polymer backbone was further modified with RGD sequence. Biodegradability of the hydrogels was evaluated by experiments on the base of enzymes and cell culture medium. Poly(aspartic acid) hydrogels possessing only disulfide bridges as cross-links proved to be degradable by collagenase I. The MG-63 cells showed healthy, fibroblast-like morphology on the double cross-linked and RGD modified hydrogels. Thiolated poly(aspartic acid) based hydrogels provide ideal conditions for adhesion, survival, proliferation, and migration of osteoblast-like cells. The highest viability was found on the thiolated PASP gels while the RGD motif had influence on compacted cluster formation of the cells. These biodegradable and biocompatible poly(aspartic acid)-based hydrogels are promising scaffolds for cell cultivation.

Use of nonhuman primates for the development of bioengineered female reproductive organs

Nonhuman primates (NHPs) have been widely used in reproductive biology, neuroscience, and drug development since a number of primate species are phylogenetically close to humans. In this review, we summarize the use of NHPs for nonclinical application in the reproductive system disorders including the loss or failure of an organ or tissue. Causes of infertility include congenital aplasia and acquired disorders of the reproductive organs. In addition, anti-cancer treatments can deplete ovarian follicles, leading to premature ovarian failure, infertility and long-term health risks. Along with a limited supply of human reproductive organs, anatomic/physiologic similarities to humans support the need for NHP models (New-World monkeys such as the common marmoset and Old-World monkeys such as cynomolgus and rhesus monkeys) to promote the advances in female infertility studies. For maintaining and executing animal studies using NHP, special protocols including animal care, anesthetic protocol, surgical technique, and immunosuppressive protocol are necessary. With a growing interest in the potential therapies such as endometrial tissue engineering, and ovary/follicle cryopreservation and grafting in Korea, this review can be useful in selecting appropriate animal models and can bridge between nonclinical studies and clinical applications by providing detailed information on the use of NHPs in the field of reproductive organ disorders.

3-dimensional bioprinting for tissue engineering applications

The 3-dimensional (3D) printing technologies, referred to as additive manufacturing (AM) or rapid prototyping (RP), have acquired reputation over the past few years for art, architectural modeling, lightweight machines, and tissue engineering applications. Among these applications, tissue engineering field using 3D printing has attracted the attention from many researchers. 3D bioprinting has an advantage in the manufacture of a scaffold for tissue engineering applications, because of rapid-fabrication, high-precision, and customized-production, etc. In this review, we will introduce the principles and the current state of the 3D bioprinting methods. Focusing on some of studies that are being current application for biomedical and tissue engineering fields using printed 3D scaffolds.

Bioengineered uterine tissue supports pregnancy in a rat model

OBJECTIVE

To create a bioengineered uterine patch for uterine repair of a partially defect uterus.

DESIGN

Three different decellularized uterine scaffolds were recellularized in vitro with primary uterine cells and green fluorescent protein- (GPF-) labeled bone marrow-derived mesenchymal stem cells (GFP-MSCs). The patches were transplanted in vivo to investigate their tissue adaptation and supporting capacity during pregnancy.

SETTING

Research laboratory.

ANIMAL(S)

Female Lewis rats (n = 9) as donors to generate whole-uterus scaffolds using three different protocols (n = 3 per protocol); Sprague Dawley rats (n = 40) for primary uterus cell isolation procedures (n = 10) and for transplantation/pregnancy studies (n = 30); and male Sprague Dawley rats (n = 12) for mating.

INTERVENTION(S)

Decellularization was achieved by whole-uterus perfusion with buffered or nonbuffered Triton-X100 and dimethyl sulfoxide (DMSO; group P1/P2) or with sodium deoxycholate (group P3). Primary uterine cells and GFP-MSCs were used to develop uterine tissue constructs, which were grafted to uteri with partial tissue defects.

MAIN OUTCOME MEASURE(S)

Recellularization efficiency and graft quality were analyzed morphologically, immunohistochemically, and by real-time quantitative polymerase chain reaction (PCR). The location and number of fetuses were documented during pregnancy days 16-20.

RESULT(S)

Pregnancy and fetal development were normal in groups P1 and P2, with fetal development over patched areas. Group P3 showed significant reduction of fetal numbers, and embryos were not seen in the grafted area. Quantitative PCR and immunohistochemistry revealed uterus-like tissue in the patches, which had been further reconstructed by infiltrating host cells after transplantation.

CONCLUSION(S)

Primary uterine cells and MSCs can be used to reconstruct decellularized uterine tissue. The bioengineered patches made from triton-X100+DMSO-generated scaffolds were supportive during pregnancy. These protocols should be explored further to develop suitable grafting material to repair partially defect uteri and possibly to create a complete bioengineered uterus.

Transplantation of bone marrow-derived mesenchymal stem cells expressing elastin alleviates pelvic floor dysfunction

Background

Pelvic floor dysfunction (PFD) is a group of clinical conditions including stress urinary incontinence (SUI) and pelvic organ prolapse (POP). The abnormality of collagen and elastin metabolism in pelvic connective tissues is implicated in SUI and POP.

Methods

To reconstitute the connective tissues with normal distribution of collagen and elastin, we transduced elastin to bone marrow-derived mesenchymal stem cells (BMSC). Elastin-expressing BMSCs were then differentiated to fibroblasts using bFGF, which produced collagen and elastin. To achieve the sustained release of bFGF, we formulated bFGF in poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NP).

Results

In an in vitro cell culture system of 7 days, when no additional bFGF was administrated, the initial PLGA-loaded bFGF NP induced prolonged production of collagen and elastin from elastin-expressing BMSCs. In vivo, co-injection of PLGA-loaded bFGF NP and elastin-expressing BMSCs into the PFD rats significantly improved the outcome of urodynamic tests. Together, these results provided an efficient model of connective tissue engineering using BMSC and injectable PLGA-loaded growth factors.

Conclusions

Our results provided the first instance of a multidisciplinary approach, combining both stem cell and nanoparticle technologies, for the treatment of PFD.

The potential role of tissue-engineered urethral substitution: clinical and preclinical studies

Urethral strictures and anomalies remain among the difficult problems in urology, with urethroplasty procedures being the most effective treatment options. The two major types of urethroplasty are anastomotic urethroplasty and widening the urethral lumen using flaps or grafts (i.e. substitution urethroplasty). However, no ideal material for the latter has been found so far. Designing and selecting such a material is a necessary and challenging endeavour, driving the need for further bioengineered urethral tissue research. This article reviews currently available studies on the potentialities of tissue engineering in urethral reconstruction, in particular those describing the use of both acellular and recellularized tissue-engineered constructs in animal and human models. Possible future developments in this field are also discussed. Copyright © 2015 John Wiley & Sons, Ltd.

Different Tissue-Derived Stem Cells: A Comparison of Neural Differentiation Capability

BACKGROUND

Stem cells are capable of self-renewal and differentiation into a wide range of cell types with multiple clinical and therapeutic applications. Stem cells are providing hope for many diseases that currently lack effective therapeutic methods, including strokes, Huntington's disease, Alzheimer's and Parkinson's disease. However, the paucity of suitable cell types for cell replacement therapy in patients suffering from neurological disorders has hampered the development of this promising therapeutic approach.

AIM

The innovative aspect of this study has been to evaluate the neural differentiation capability of different tissue-derived stem cells coming from different tissue sources such as bone marrow, umbilical cord blood, human endometrium and amniotic fluid, cultured under the same supplemented media neuro-transcription factor conditions, testing the expression of neural markers such as GFAP, Nestin and Neurofilaments using the immunofluorescence staining assay and some typical clusters of differentiation such as CD34, CD90, CD105 and CD133 by using the cytofluorimetric test assay.

RESULTS

Amniotic fluid derived stem cells showed a more primitive phenotype compared to the differentiating potential demonstrated by the other stem cell sources, representing a realistic possibility in the field of regenerative cell therapy suitable for neurodegenerative diseases.

Isolation and characterisation of mesenchymal stem/stromal cells in the ovine endometrium

Objective

Mesenchymal stem/stromal cells (MSC) were recently discovered in the human endometrium. These cells possess key stem cell properties and show promising results in small animal models when used for preclinical tissue engineering studies. A small number of surface markers have been identified that enrich for MSC from bone marrow and human endometrium, including the Sushi Domain-containing 2 (SUSD2; W5C5) and CD271 markers. In preparation for developing a large animal preclinical model for urological and gynecological tissue engineering applications we aimed to identify and characterise MSC in ovine endometrium and determine surface markers to enable their prospective isolation.

Materials and Methods

Ovine endometrium was obtained from hysterectomised ewes following progesterone synchronisation, dissociated into single cell suspensions and tested for MSC surface markers and key stem cell properties. Purified stromal cells were obtained by flow cytometry sorting with CD49f and CD45 to remove epithelial cells and leukocytes respectively, and MSC properties investigated.

Results

There was a small population CD271⁺ stromal cells (4.5 ± 2.3%) in the ovine endometrium. Double labelling with CD271 and CD49f showed that the sorted CD271⁺CD49f^- stromal cell population possessed significantly higher cloning efficiency, serial cloning capacity and a qualitative increased ability to differentiate into 4 mesodermal lineages (adipocytic, smooth muscle, chondrocytic and osteoblastic) than CD271^-CD49f^- cells. Immunolabelling studies identified an adventitial perivascular location for ovine endometrial CD271⁺ cells.

Conclusion

This is the first study to characterise MSC in the ovine endometrium and identify a surface marker profile identifying their location and enabling their prospective isolation. This knowledge will allow future preclinical studies with a large animal model that is well established for pelvic organ prolapse research.

[Tissue engineering in reconstructive urology]

The term tissue engineering incorporates various techniques for the production of replacement tissues and organs. In urology tissue engineering offers many promising possibilities for the reconstruction of the urinary tract. Currently, buccal mucosa and urothelial cells are most commonly used for tissue engineering of the urinary tract. Various materials have been tested for their suitability as tissue scaffolds. The ideal scaffold, however, has not yet been found. In addition to material sciences and cell culture methods, surgical techniques play an important role in reconstructive urology for the successful implantation of tissue engineered transplants.

Towards the development of a bioengineered uterus: comparison of different protocols for rat uterus decellularization

Uterus transplantation (UTx) may be the only possible curative treatment for absolute uterine factor infertility, which affects 1 in every 500 females of fertile age. We recently presented the 6-month results from the first clinical UTx trial, describing nine live-donor procedures. This routine involves complicated surgery and requires potentially harmful immune suppression to prevent rejection. However, tissue engineering applications using biomaterials and stem cells may replace the need for a live donor, and could prevent the required immunosuppressive treatment. To investigate the basic aspects of this, we developed a novel whole-uterus scaffold design for uterus tissue engineering experiments in the rat. Decellularization was achieved by perfusion of detergents and ionic solutions. The remaining matrix and its biochemical and mechanical properties were quantitatively compared from using three different protocols. The constructs were further compared with native uterus tissue composition. Perfusion with Triton X-100/dimethyl sulfoxide/H2O led to a compact, weaker scaffold that showed evidence of a compromised matrix organization. Sodium deoxycholate/dH2O perfusion gave rise to a porous scaffold that structurally and mechanically resembled native uterus better. An innovative combination of two proteomic analyses revealed higher fibronectin and versican content in these porous scaffolds, which may explain the improved scaffold organization. Together with other important protocol-dependent differences, our results can contribute to the development of improved decellularization protocols for assorted organs. Furthermore, our study shows the first available data on decellularized whole uterus, and creates new opportunities for numerous in vitro and in vivo whole-uterus tissue engineering applications.

The market trend analysis and prospects of scaffolds for stem cells

Background

Scaffolds are one of the three most important elements constituting the basic concept of regenerative medicine, and are included in the core technology of regenerative medicine along with stem cells and tissue engineering. Stem cells are very important technology because they are directly responsible for the regenerative treatment of the disease and the damaged tissue, but with regards to the technology and the products that use stem cells exclusively, there is a technical limitation of limited survival rate and the engraftment rate of the transplanted cell, and rather than recovering the damaged tissue fundamentally, there is a limit that the concept is more of just another medicine treatment using cells.

A scaffold is a natural or synthetic biocompatible material transplanted into a human body to be used as the exclusive treatment or as an assisted method of another treatment of a disease and for the recovery of damaged tissue. Therefore, according to the characteristics of the tissue to be applied, scaffolds must have the characteristics such as the excellent biocompatibility, biodegradability, minimum immunity and inflammation, proper mechanical strength and interaction between the material and the cells.

Results

The world stem cell market was approximately 2.715 billion dollars in 2010, and with a growth rate of 16.8% annually, a market of 6.877 billion dollars will be formed in 2016. From 2017, the expected annual growth rate is 10.6%, which would expand the market to 11.38 billion dollars by 2021. Meanwhile, the world scaffold element technology market was approximately 4.57 million dollars in 2013, and by increasing 13.4% annually, it is estimated to expand to 10.63 million dollars by 2020. The Korean scaffold element technology market was about 22 million dollars in 2013, and with a steady growth of approximately 13.4% every year, it is prospected to be about 52 million dollars by 2020.

Conclusions

In comparison to the medical material and medicine sales growth rate, the future scaffold element technology market is judged to be higher in growth possibility.

Emerging roles for extracellular vesicles in tissue engineering and regenerative medicine

Extracellular vesicles (EVs)-comprising a heterogeneous population of cell-derived lipid vesicles including exosomes, microvesicles, and others-have recently emerged as both mediators of intercellular information transfer in numerous biological systems and vehicles for drug delivery. In both roles, EVs have immense potential to impact tissue engineering and regenerative medicine applications. For example, the therapeutic effects of several progenitor and stem cell-based therapies have been attributed primarily to EVs secreted by these cells, and EVs have been recently reported to play direct roles in injury-induced tissue regeneration processes in multiple physiological systems. In addition, EVs have been utilized for targeted drug delivery in regenerative applications and possess unique potential to be harnessed as patient-derived drug delivery vehicles for personalized medicine. This review discusses EVs in the context of tissue repair and regeneration, including their utilization as drug carriers and their crucial role in cell-based therapies. Furthermore, the article highlights the growing need for bioengineers to understand, consider, and ultimately design and specifically control the activity of EVs to maximize the efficacy of tissue engineering and regenerative therapies.

Adult stem cells and cardiac regeneration

There is worldwide demand for therapies to promote the robust repair and regeneration with maximum regain of function of particular tissues and organs damaged by disease or injury. The potential role of adult stem cells has been highlighted by an increasing number of in vitro and in vivo studies. Nowhere is this more evident than in adult stem cell-based therapies being explored to promote cardiac regeneration. In spite of encouraging advances, significant challenges remain.