FISHing for bacteria in food – A promising tool for the reliable detection of pathogenic bacteria?

Beyond water and soil: Air emerges as a major reservoir of human pathogens

Assessing the risk of human pathogens in the environment is crucial for controlling the spread of diseases and safeguarding human health. However, conducting a thorough assessment of low-abundance pathogens in highly complex environmental microbial communities remains challenging. This study compiled a comprehensive catalog of 247 human-pathogenic bacterial taxa from global biosafety agencies and identified more than 78 million genome-specific markers (GSMs) from their 17,470 sequenced genomes. Subsequently, we analyzed these pathogens' types, abundance, and diversity within 474 shotgun metagenomic sequences obtained from diverse environmental sources. The results revealed that among the four habitats studied (air, water, soil, and sediment), the detection rate, diversity, and abundance of detectable pathogens in the air all exceeded those in the other three habitats. Air, sediment, and water environments exhibited identical dominant taxa, indicating that these human pathogens may have unique environmental vectors for their transmission or survival. Furthermore, we observed the impact of human activities on the environmental risk posed by these pathogens, where greater amounts of human activities significantly increased the abundance of human pathogenic bacteria, especially in water and air. These findings have remarkable implications for the environmental risk assessment of human pathogens, providing valuable insights into their presence and distribution across different habitats.

Evaluation of Simultaneous Growth of Escherichia coli O157:H7, Salmonella spp., and Listeria monocytogenes in Ground Beef Samples in Different Growth Media

Several multiplex approaches for the simultaneous detection of pathogens in food have been developed in recent years, but the use of a single enrichment medium remains a problem. In this study, six enrichment broths (five non-selective media, tryptic soy broth (TSB), brain heart infusion broth (BHI), buffered peptone water (BPW), universal pre-enrichment broth (UPB), no. 17 broth, and a selective, Salmonella Escherichia Listeria broth (SEL)), were studied for the simultaneous detection of E. coli O157:H7, Salmonella spp., and L. monocytogenes, to validate the suitable enrichment broth to be used for the detection methods. Different ratios of E. coli O157:H7, Salmonella spp., and L. monocytogenes were used. Almost all non-selective broths evaluated in this study showed similar growth parameters and profiles among each other. The only selective enrichment broth under analysis (SEL) showed distinct growth features compared to the non-selective media, allowing for a slower but balanced growth of the three pathogens, which could be beneficial in preventing the overgrowth of fast-growing bacteria. In addition, when tested in ground beef samples, SEL broth seems to be the most distinctive medium with a balanced growth pattern observed for the three pathogens. Overall, this study is intended to provide the basis for the selection of suitable enrichment broths according to the technology detection to be used, the desired time of enrichment, and the expected balanced concentration of pathogens.

Utilizing fab fragment-conjugated surface plasmon resonance-based biosensor for detection of Salmonella Enteritidis

Although antibodies, a key element of biorecognition, are frequently used as biosensor probes, the use of these large molecules can lead to adverse effects. Fab fragments can be reduced to allow proper antigen-binding orientation via thiol groups containing Fab sites that can directly penetrate Au sites chemically. In this study, the ability of the surface plasmon resonance (SPR) sensor to detect Salmonella was studied. Tris(2-carboxyethyl)phosphine was used as a reducing agent to obtain half antibody fragments. Sensor surface was immobilized with antibody, and bacteria suspensions were injected from low to high concentrations. Response units were changed by binding first reduced antibody fragments, then bacteria. The biosensor was able to determine the bacterial concentrations between 103 and 108 CFU/mL. Based on these results, the half antibody fragmentation method can be generalized for faster, label-free, sensitive, and selective detection of other bacteria species.

A New Peptide Nucleic Acid Fluorescence In Situ Hybridization Probe for the Specific Detection of Salmonella Species in Food Matrices

Salmonella spp. is among the most central etiological agents in foodborne bacterial disorders. To identify Salmonella spp., numerous new molecular techniques have been developed conversely to the traditional culture-based methods. In this work, a new peptide nucleic acid fluorescence in situ hybridization (PNA-FISH) method was developed for the specific detection of Salmonella species, allowing a faster analysis compared with the traditional methods (ISO 6579-1: 2017). The method was optimized based on a novel PNA probe (SalPNA1692) combined with a blocker probe to detect Salmonella in food samples through an assessment of diverse-rich and selective enrichment broths. Our findings indicated that the best outcome was obtained using a 24-h pre-enrichment step in buffered peptone water, followed by RambaQuick broth selective enrichment for 16 h. For the enrichment step performance validation, fresh ground beef was artificially contaminated with two ranges of concentration of inoculum: a low level (0.2-2 colony-forming units [CFUs]/25 g) and a high level (2-10 CFUs/25 g). The new PNA-FISH method presented a specificity of 100% and a detection limit of 0.5 CFU/25 g of food sample, which confirms the great potential of applying PNA probes in food analysis.

Recent Progress and Challenges on the Microfluidic Assay of Pathogenic Bacteria Using Biosensor Technology

Microfluidic technology is one of the new technologies that has been able to take advantage of the specific properties of micro and nanoliters, and by reducing the costs and duration of tests, it has been widely used in research and treatment in biology and medicine. Different materials are often processed into miniaturized chips containing channels and chambers within the microscale range. This review (containing 117 references) demonstrates the significance and application of nanofluidic biosensing of various pathogenic bacteria. The microfluidic application devices integrated with bioreceptors and advanced nanomaterials, including hyperbranched nano-polymers, carbon-based nanomaterials, hydrogels, and noble metal, was also investigated. In the present review, microfluid methods for the sensitive and selective recognition of photogenic bacteria in various biological matrices are surveyed. Further, the advantages and limitations of recognition methods on the performance and efficiency of microfluidic-based biosensing of photogenic bacteria are critically investigated. Finally, the future perspectives, research opportunities, potential, and prospects on the diagnosis of disease related to pathogenic bacteria based on microfluidic analysis of photogenic bacteria are provided.

Microfluidics combined with fluorescence in situ hybridization (FISH) for Candida spp. detection

One of the most prevalent healthcare-associated infection is the urinary tract infection (UTI), caused by opportunistic pathogens such as Candida albicans or non-albicans Candida species (NACS). Urine culture methods are routinely used for UTI diagnostics due to their specificity, sensitivity and low-cost. However, these methods are also laborious, time- and reagent-consuming. Therefore, diagnostic methods relying on nucleic acids have been suggested as alternatives. Nucleic acid-based methods can provide results within 24 h and can be adapted to point-of-care (POC) detection. Here, we propose to combine fluorescence in situ hybridization (FISH) with a microfluidic platform for the detection of Candida spp. As a case study we used C. tropicalis, which is reported as the second most common NACS urine isolate obtained from patients suspected with UTI. The microfluidic platform proposed in this study relies on hydrodynamic trapping, and uses physical barriers (e.g., microposts) for the separation of target cells from the suspension. Using a specific peptide nucleic acid (PNA) probe, the FISH procedure was applied onto previously trapped C. tropicalis cells present inside the microfluidic platform. Fluorescence signal intensity of hybridized cells was captured directly under the epifluorescence microscope. Overall, the PNA probe successfully detected C. tropicalis in pure culture and artificial urine (AU) using FISH combined with the microfluidic platform. Our findings reveal that FISH using nucleic acid mimics (PNA) in combination with microfluidics is a reliable method for the detection of microorganisms such as C. tropicalis. As such, this work provides the basis for the development of a POC detection platform in the future.

The role of Nucleic Acid Mimics (NAMs) on FISH-based techniques and applications for microbial detection

Fluorescent in situ hybridization (FISH) is a powerful tool that for more than 30 years has allowed to detect and quantify microorganisms as well as to study their spatial distribution in three-dimensional structured environments such as biofilms. Throughout these years, FISH has been improved in order to face some of its earlier limitations and to adapt to new research objectives. One of these improvements is related to the emergence of Nucleic Acid Mimics (NAMs), which are now employed as alternatives to the DNA and RNA probes that have been classically used in FISH. NAMs such as peptide and locked nucleic acids (PNA and LNA) have provided enhanced sensitivity and specificity to the FISH technique, as well as higher flexibility in terms of applications. In this review, we aim to cover the state-of-the-art of the different NAMs and explore their possible applications in FISH, providing a general overview of the technique advancement in the last decades.

Microfluidic One-Pot Digital Droplet FISH Using LNA/DNA Molecular Beacons for Bacteria Detection and Absolute Quantification

We demonstrate detection and quantification of bacterial load with a novel microfluidic one-pot wash-free fluorescence in situ hybridization (FISH) assay in droplets. The method offers minimal manual workload by only requiring mixing of the sample with reagents and loading it into a microfluidic cartridge. By centrifugal microfluidic step emulsification, our method partitioned the sample into 210 pL (73 µm in diameter) droplets for bacterial encapsulation followed by in situ permeabilization, hybridization, and signal detection. Employing locked nucleic acid (LNA)/DNA molecular beacons (LNA/DNA MBs) and NaCl-urea based hybridization buffer, the assay was characterized with Escherichia coli, Klebsiella pneumonia, and Proteus mirabilis. The assay performed with single-cell sensitivity, a 4-log dynamic range from a lower limit of quantification (LLOQ) at ~3 × 10³ bacteria/mL to an upper limit of quantification (ULOQ) at ~3 × 10⁷ bacteria/mL, anda linearity R² = 0.976. The total time-to-results for detection and quantification was around 1.5 hours.

Potential of Flow Cytometric Approaches for Rapid Microbial Detection and Characterization in the Food Industry-A Review

As microbial contamination is persistent within the food and bioindustries and foodborne infections are still a significant cause of death, the detection, monitoring, and characterization of pathogens and spoilage microorganisms are of great importance. However, the current methods do not meet all relevant criteria. They either show (i) inadequate sensitivity, rapidity, and effectiveness; (ii) a high workload and time requirement; or (iii) difficulties in differentiating between viable and non-viable cells. Flow cytometry (FCM) represents an approach to overcome such limitations. Thus, this comprehensive literature review focuses on the potential of FCM and fluorescence in situ hybridization (FISH) for food and bioindustry applications. First, the principles of FCM and FISH and basic staining methods are discussed, and critical areas for microbial contamination, including abiotic and biotic surfaces, water, and air, are characterized. State-of-the-art non-specific FCM and specific FISH approaches are described, and their limitations are highlighted. One such limitation is the use of toxic and mutagenic fluorochromes and probes. Alternative staining and hybridization approaches are presented, along with other strategies to overcome the current challenges. Further research needs are outlined in order to make FCM and FISH even more suitable monitoring and detection tools for food quality and safety and environmental and clinical approaches.

Monitoring co-cultures of Clostridium carboxidivorans and Clostridium kluyveri by fluorescence in situ hybridization with specific 23S rRNA oligonucleotide probes

The development of co-cultures of clostridial strains which combine different physiological traits represents a promising strategy to achieve the environmentally friendly production of biofuels and chemicals. For the optimization of such co-cultures it is essential to monitor their composition and stability throughout fermentation. FISH is a quick and sensitive method for the specific labeling and quantification of cells within microbial communities. This technique is neither limited by the anaerobic fermenter environment nor by the need of prior genetic modification of strains. In this study, two specific 23S rRNA oligonucleotide probes, ClosKluy and ClosCarb, were designed for the monitoring of C. kluyveri and C. carboxidivorans, respectively. After the optimization of hybridization conditions for both probes, which was achieved at 30% (v/v) formamide, a high specificity was observed with epifluorescence microscopy using cells from different pure reference strains. The discriminating properties of the ClosKluy and ClosCarb probes was verified with samples from heterotrophic co-cultures in anaerobic flasks as well as autotrophic stirred-tank bioreactor co-cultures of C. kluyveri and C. carboxidivorans. Besides being suited to monitor defined co-cultures of these two species, the new specific FISH oligonucleotide probes for C. kluyveri and C. carboxidivorans additionally have potential to be applied in environmental studies.

Rolling Circle Amplification as an Efficient Analytical Tool for Rapid Detection of Contaminants in Aqueous Environments

Environmental contaminants are a global concern, and an effective strategy for remediation is to develop a rapid, on-site, and affordable monitoring method. However, this remains challenging, especially with regard to the detection of various contaminants in complex water environments. The application of molecular methods has recently attracted increasing attention; for example, rolling circle amplification (RCA) is an isothermal enzymatic process in which a short nucleic acid primer is amplified to form a long single-stranded nucleic acid using a circular template and special nucleic acid polymerases. Furthermore, this approach can be further engineered into a device for point-of-need monitoring of environmental pollutants. In this paper, we describe the fundamental principles of RCA and the advantages and disadvantages of RCA assays. Then, we discuss the recently developed RCA-based tools for environmental analysis to determine various targets, including heavy metals, organic small molecules, nucleic acids, peptides, proteins, and even microorganisms in aqueous environments. Finally, we summarize the challenges and outline strategies for the advancement of this technique for application in contaminant monitoring.

Propionic acid bacteria in the food industry: An update on essential traits and detection methods

Propionic acid bacteria (PAB) is an umbrella term for a group of bacteria with the ability to produce propionic acid. In the past, due to this common feature and other phenotypic similarities, genetically heterogeneous bacteria were considered as a single genus, Propionibacterium. Members of this genus ranged from "dairy propionibacteria," which are widely known for their role in eye and flavor formation in cheese production, to "cutaneous propionibacteria," which are primarily associated with human skin. In 2016, the introduction of two new genera based on genotypic data facilitated a clear separation of cutaneous (Cutibacterium spp.) from dairy PAB (Propionibacterium spp., Acidipropionibacterium spp.). In light of these taxonomic changes, but with particular emphasis on dairy PAB, this review describes the current state of knowledge about metabolic pathways and other characteristics such as antibiotic resistance and virulence factors. In addition, the relevance of dairy PAB for the food industry and cheese production in particular is highlighted. Furthermore, methods for cultivation, detection, and enumeration are reviewed, incorporating the current taxonomy as well as the potential for routine applications.

Current State of Development of Biosensors and Their Application in Foodborne Pathogen Detection

ABSTRACT

Foodborne disease outbreaks continue to be a major public health and food safety concern. Testing products promptly can protect consumers from foodborne diseases by ensuring the safety of food before retail distribution. Fast, sensitive, and accurate detection tools are in great demand. Therefore, various approaches have been explored recently to find a more effective way to incorporate antibodies, oligonucleotides, phages, and mammalian cells as signal transducers and analyte recognition probes on biosensor platforms. The ultimate goal is to achieve high specificity and low detection limits (1 to 100 bacterial cells or piconanogram concentrations of toxins). Advancements in mammalian cell-based and bacteriophage-based sensors have produced sensors that detect low levels of pathogens and differentiate live from dead cells. Combinations of biotechnology platforms have increased the practical utility and application of biosensors for detection of foodborne pathogens. However, further rigorous testing of biosensors with complex food matrices is needed to ensure the utility of these sensors for point-of-care needs and outbreak investigations.

HIGHLIGHTS

Application of Nucleic Acid Mimics in Fluorescence In Situ Hybridization

Traditionally, RNA and DNA probes are used in fluorescence in situ hybridization (FISH) methods for microbial detection and characterization of communities' structure and diversity. However, the recent introduction of nucleic acid mimics (NAMs) has improved the robustness of the FISH methods in terms of sensitivity and specificity. Several NAMs have been used, of which the most relevant are peptide nucleic acid (PNA), locked nucleic acids (LNA), 2'-O-methyl RNA (2'OMe), and phosphorothioates (PS). In this chapter, we describe a protocol using PNA and LNA/2'OMe probes for microbial detection by FISH, pointing out the differences between them. These protocols are easily adapted to different microorganisms and different probe sequences.

Detection of Microorganisms by Fluorescence In Situ Hybridization Using Peptide Nucleic Acid

Fluorescence in situ hybridization (FISH) is a 30-year-old technology that has evolved continuously and is now one of the most well-established molecular biology techniques. Traditionally, DNA probes are used for in situ hybridization. However, synthetic molecules are emerging as very promising alternatives, providing better hybridization performance and making FISH procedures easier and more efficient. In this chapter, we describe a universal FISH protocol, using nucleic acid probes, for the detection of bacteria. This protocol should be easily applied to different microorganisms as a way of identifying in situ relevant microorganisms (including pathogens) and their distribution patterns in different types of samples.

Innovative Control of Biofilms on Stainless Steel Surfaces Using Electrolyzed Water in the Dairy Industry

Biofilms on food-contact surfaces can lead to recurrent contamination. This work aimed to study the biofilm formation process on stainless steel plates used in the dairy industry: 304 surface finish 2B and electropolished; and the effect of a cleaning and disinfection process using alkaline (AEW) and neutral (NEW) electrolyzed water. Milk fouling during heat processing can lead to type A or B deposits, which were analyzed for composition, surface energy, thickness, and roughness, while the role of raw milk microbiota on biofilm development was investigated. Bacteria, yeasts, and lactic acid bacteria were detected using EUB-338, PF2, and Str-493 probes, respectively, whereas Lis-637 probe detected Listeria sp. The genetic complexity and diversity of biofilms varied according to biofilm maturation day, as evaluated by 16S rRNA gene sequence, denaturing gradient gel electrophoresis, and fluorescence in situ hybridization microscopy. From analysis of the experimental designs, a cleaning stage of 50 mg/L NaOH of AEW at 30 °C for 10 min, followed by disinfection using 50 mg/L total available chlorine of NEW at 20 °C for 5 min is a sustainable alternative process to prevent biofilm formation. Fluorescence microscopy was used to visualize the effectiveness of this process.

Point-of-Need Diagnostics for Foodborne Pathogen Screening

Foodborne illness is a major public health issue that results in millions of global infections annually. The burden of such illness sits mostly with developing countries, as access to advanced laboratory equipment and skilled lab technicians, as well as consistent power sources, is limited and expensive. Current gold standards in foodborne pathogen screening involve labor-intensive sample enrichment steps, pathogen isolation and purification, and costly readout machinery. Overall, time to detection can take multiple days, excluding the time it takes to ship samples to off-site laboratories. Efforts have been made to simplify the workflow of such tests by integrating multiple steps of foodborne pathogen screening procedures into a singular device, as well as implementing more point-of-need readout methods. In this review, we explore recent advancements in developing point-of-need devices for foodborne pathogen screening. We discuss the detection of surface markers, nucleic acids, and metabolic products using both paper-based and microfluidic devices, focusing primarily on developments that have been made between 2015 and mid-2020.

Nano-enabled sensing approaches for pathogenic bacterial detection

Infectious diseases caused by pathogenic bacteria, especially antibiotic-resistant bacteria, are one of the biggest threats to global health. To date, bacterial contamination is detected using conventional culturing techniques, which are highly dependent on expert users, limited by the processing time and on-site availability. Hence, real-time and continuous monitoring of pathogen levels is required to obtain valuable information that could assist health agencies in guiding prevention and containment of pathogen-related outbreaks. Nanotechnology-based smart sensors are opening new avenues for early and rapid detection of such pathogens at the patient's point-of-care. Nanomaterials can play an essential role in bacterial sensing owing to their unique optical, magnetic, and electrical properties. Carbon nanoparticles, metallic nanoparticles, metal oxide nanoparticles, and various types of nanocomposites are examples of smart nanomaterials that have drawn intense attention in the field of microbial detection. These approaches, together with the advent of modern technologies and coupled with machine learning and wireless communication, represent the future trend in the diagnosis of infectious diseases. This review provides an overview of the recent advancements in the successful harnessing of different nanoparticles for bacterial detection. In the beginning, we have introduced the fundamental concepts and mechanisms behind the design and strategies of the nanoparticles-based diagnostic platform. Representative research efforts are highlighted for in vitro and in vivo detection of bacteria. A comprehensive discussion is then presented to cover the most commonly adopted techniques for bacterial identification, including some seminal studies to detect bacteria at the single-cell level. Finally, we discuss the current challenges and a prospective outlook on the field, together with the recommended solutions.

An Improved Approach to Identify Bacterial Pathogens to Human in Environmental Metagenome

The identification of bacterial pathogens to humans is critical for environmental microbial risk assessment. However, current methods for identifying pathogens in environmental samples are limited in their ability to detect highly diverse bacterial communities and accurately differentiate pathogens from commensal bacteria. In the present study, we suggest an improved approach using a combination of identification results obtained from multiple databases, including the multilocus sequence typing (MLST) database, virulence factor database (VFDB), and pathosystems resource integration center (PATRIC) databases to resolve current challenges. By integrating the identification results from multiple databases, potential bacterial pathogens in metagenomes were identified and classified into eight different groups. Based on the distribution of genes in each group, we proposed an equation to calculate the metagenomic pathogen identification index (MPII) of each metagenome based on the weighted abundance of identified sequences in each database. We found that the accuracy of pathogen identification was improved by using combinations of multiple databases compared to that of individual databases. When the approach was applied to environmental metagenomes, metagenomes associated with activated sludge were estimated with higher MPII than other environments (i.e., drinking water, ocean water, ocean sediment, and freshwater sediment). The calculated MPII values were statistically distinguishable among different environments (p<0.05). These results demonstrate that the suggested approach allows more for more accurate identification of the pathogens associated with metagenomes.

Gaps in the assortment of rapid assays for microorganisms of interest to the dairy industry

This review presents the results of a study into the offering of rapid microbial detection assays to the Irish dairy industry. At the outset, a consultation process was undertaken whereby key stakeholders were asked to compile a list of the key microorganisms of interest to the sector. The resultant list comprises 19 organisms/groups of organisms divided into five categories: single pathogenic species (Cronobacter sakazakii, Escherichia coli and Listeria monocytogenes); genera containing pathogenic species (Bacillus, Clostridium, Listeria, Salmonella; Staphylococcus); broad taxonomic groupings (Coliforms, Enterobacteriaceae, fecal Streptococci, sulfite reducing bacteria/sulfite reducing Clostridia [SRBs/SRCs], yeasts and molds); organisms displaying certain growth preferences or resistance as regards temperature (endospores, psychrotrophs, thermodurics, thermophiles); indicators of quality (total plate count, Pseudomonas spp.). A survey of the rapid assays commercially available for the 19 organisms/groups of organisms was conducted. A wide disparity between the number of rapid tests available was found. Four categories were used to summarize the availability of rapid assays per organism/group of organisms: high coverage (>15 assays available); medium coverage (5-15 assays available); low coverage (<5 assays available); no coverage (0 assays available). Generally, species or genera containing pathogens, whose presence is regulated-for, tend to have a good selection of commercially available rapid assays for their detection, whereas groups composed of heterogenous or even undefined genera of mainly spoilage organisms tend to be "low coverage" or "no coverage." Organisms/groups of organisms with "low coverage" by rapid assays include: Clostridium spp.; fecal Streptococci; and Pseudomonas spp. Those with "no coverage" by rapid assays include: endospores; psychrotrophs; SRB/SRCs; thermodurics; and thermophiles. An important question is: why have manufacturers of rapid microbiological assays failed to respond to the necessity for rapid methods for these organisms/groups of organisms? The review offers explanations, ranging from the technical difficulty involved in detecting as broad a group as the thermodurics, which covers the spores of multiple sporeforming genera as well at least six genera of mesophilic nonsporeformers, to the taxonomically controversial issue as to what constitutes a fecal Streptococcus or SRBs/SRCs. We review two problematic areas for assay developers: validation/certification and the nature of dairy food matrices. Development and implementation of rapid alternative test methods for the dairy industry is influenced by regulations relating to both the microbiological quality standards and the criteria alternative methods must meet to qualify as acceptable test methods. However, the gap between the certification of developer's test systems as valid alternative methods in only a handful of representative matrices, and the requirement of dairy industries to verify the performance of alternative test systems in an extensive and diverse range of dairy matrices needs to be bridged before alternative methods can be widely accepted and adopted in the dairy industry. This study concludes that many important dairy matrices have effectively been ignored by assay developers.

FISH and chips: a review of microfluidic platforms for FISH analysis

Fluorescence in situ hybridization (FISH) allows visualization of specific nucleic acid sequences within an intact cell or a tissue section. It is based on molecular recognition between a fluorescently labeled probe that penetrates the cell membrane of a fixed but intact sample and hybridizes to a nucleic acid sequence of interest within the cell, rendering a measurable signal. FISH has been applied to, for example, gene mapping, diagnosis of chromosomal aberrations and identification of pathogens in complex samples as well as detailed studies of cellular structure and function. However, FISH protocols are complex, they comprise of many fixation, incubation and washing steps involving a range of solvents and temperatures and are, thus, generally time consuming and labor intensive. The complexity of the process, the relatively high-priced fluorescent probes and the fairly high-end microscopy needed for readout render the whole process costly and have limited wider uptake of this powerful technique. In recent years, there have been attempts to transfer FISH assay protocols onto microfluidic lab-on-a-chip platforms, which reduces the required amount of sample and reagents, shortens incubation times and, thus, time to complete the protocol, and finally has the potential for automating the process. Here, we review the wide variety of approaches for lab-on-chip-based FISH that have been demonstrated at proof-of-concept stage, ranging from FISH analysis of immobilized cell layers, and cells trapped in arrays, to FISH on tissue slices. Some researchers have aimed to develop simple devices that interface with existing equipment and workflows, whilst others have aimed to integrate the entire FISH protocol into a fully autonomous FISH on-chip system. Whilst the technical possibilities for FISH on-chip are clearly demonstrated, only a small number of approaches have so far been converted into off-the-shelf products for wider use beyond the research laboratory.

NOTIFy (non-toxic lyophilized field)-FISH for the identification of biological agents by Fluorescence in situ Hybridization

The rapid and reliable diagnostics of highly pathogenic bacteria under restricted field conditions poses one of the major challenges to medical biodefense, especially since false positive or false negative reports might have far-reaching consequences. Fluorescence in situ hybridization (FISH) has the potential to represent a powerful microscopy-based addition to the existing molecular-based diagnostic toolbox. In this study, we developed a set of FISH-probes for the fast, matrix independent and simultaneous detection of thirteen highly pathogenic bacteria in different environmental and clinical sample matrices. Furthermore, we substituted formamide, a routinely used chemical that is toxic and volatile, by non-toxic urea. This will facilitate the application of FISH under resource limited field laboratory conditions. We demonstrate that hybridizations performed with urea show the same specificity and comparable signal intensities for the FISH-probes used in this study. To further simplify the use of FISH in the field, we lyophilized the reagents needed for FISH. The signal intensities obtained with these lyophilized reagents are comparable to freshly prepared reagents even after storage for a month at room temperature. Finally, we show that by the use of non-toxic lyophilized field (NOTIFy)-FISH, specific detection of microorganisms with simple and easily transportable equipment is possible in the field.

Impacts of Clarification Techniques on Sample Constituents and Pathogen Retention

Determination of the microbial content in foods is important, not only for safe consumption, but also for food quality, value, and yield. A variety of molecular techniques are currently available for both identification and quantification of microbial content within samples; however, their success is often contingent upon proper sample preparation when the subject of investigation is a complex mixture of components such as foods. Because of the importance of sample preparation, the present study employs a systematic approach to compare the effects of four different separation techniques (glass wool, 50 μm polypropylene filters, graphite felt, and continuous flow centrifugation (CFC)) on sample preparation. To define the physical effects associated with the use of these separation methods, a multifactorial analysis was performed where particle size and composition, both pre- and post- processing, were analyzed for four different food matrices including lean ground beef, ground pork, ground turkey and spinach. Retention of three important foodborne bacterial pathogens (Escherichia coli O157:H7, Salmonella enterica, and Listeria monocytogenes) was also examined to evaluate the feasibility of the aforementioned methods to be utilized within the context of foodborne pathogen detection. Data from the multifactorial analysis not only delineated the particle size ranges but also defined the unique compositional profiles and quantified the bacterial retention. The three filtration membranes allowed for the passage of bacteria with minimal loss while CFC concentrated the inoculated bacteria. In addition, the deposition and therefore concentration of food matrix observed with CFC was considerably higher for meat samples relative to spinach. However, filtration with glass wool prior to CFC helped clarify meat samples, which led to considerably lower amounts of solids in the CFC vessel post processing and an increase in the recovery of the bacteria. Overall, by laying a framework for the deductive selection of sample preparation techniques, the results of the study can be applied to a range of applications where it would be beneficial to scientifically guide the pairing of the criteria associated with a downstream detection method with the most advantageous sample preparation techniques for complex matrices such as foods.

Use of high-content analysis and machine learning to characterize complex microbial samples via morphological analysis

High Content Analysis (HCA) has become a cornerstone of cellular analysis within the drug discovery industry. To expand the capabilities of HCA, we have applied the same analysis methods, validated in numerous mammalian cell models, to microbiology methodology. Image acquisition and analysis of various microbial samples, ranging from pure cultures to culture mixtures containing up to three different bacterial species, were quantified and identified using various machine learning processes. These HCA techniques allow for faster cell enumeration than standard agar-plating methods, identification of “viable but not plate culturable” microbe phenotype, classification of antibiotic treatment effects, and identification of individual microbial strains in mixed cultures. These methods greatly expand the utility of HCA methods and automate tedious and low-throughput standard microbiological methods.

A review of methods for the detection of pathogenic microorganisms

The testing and rapid detection of pathogenic organisms is a crucial protocol in the prevention and identification of crises related to health, safety and wellbeing. Pathogen detection has become one of the most challenging aspects in the food and water industries, because of the rapid spread of waterborne and foodborne diseases in the community and at significant costs. With the prospect of inevitable population growth, and an influx of tourism to certain water bodies testing will become a requirement to control and prevent possible outbreaks of potentially fatal illnesses. The legislation is already particularly rigorous in the food industry, where failure to detect pathogenic materials represents a catastrophic event, particularly for the elderly, very young or immune-compromised population types. In spite of the need and requirement for rapid analytical testing, conventional and standard bacterial detection assays may take up to seven days to yield a result. Given the advent of new technologies, biosensors, chemical knowledge and miniaturisation of instrumentation this timescale is not acceptable. This review presents an opportunity to fill a knowledge gap for an extremely important research area; discussing the main techniques, biology, chemistry, miniaturisation, sensing and the emerging state-of-the-art research and developments for detection of pathogens in food, water, blood and faecal samples.

Ultrasensitive tantalum oxide nano-coated long-period gratings for detection of various biological targets

In this work we discussed a label-free biosensing application of long-period gratings (LPGs) optimized in refractive index (RI) sensitivity by deposition of thin tantalum oxide (TaO_x) overlays. Comparing to other thin film and materials already applied for maximizing the RI sensitivity, TaO_x offers good chemical and mechanical stability during its surface functionalization and other biosensing experiments. It was shown theoretically and experimentally that when RI of the overlay is as high as 2 in IR spectral range, for obtaining LPGs ultrasensitive to RI, the overlay's thickness must be determined with subnanometer precision. In this experiment the TaO_x overlays were deposited using Atomic Layer Deposition method that allowed for achieving overlays with exceptionally well-defined thickness and optical properties. The TaO_x nano-coated LPGs show RI sensitivity determined for a single resonance exceeding 11,500 nm/RIU in RI range n_D= 1.335-1.345 RIU, as expected for label-free biosensing applications. Capability for detection of various in size biological targets, i.e., proteins (avidin) and bacteria (Escherichia coli), with TaO_x-coated LPGs was verified using biotin and bacteriophage adhesin as recognition elements, respectively. It has been shown that functionalization process, as well as type of recognition elements and target analyte must be taken into consideration when the LPG sensitivity is optimized. In this work optimized approach made possible detection of small in size biological targets such as proteins with sensitivity reaching 10.21 nm/log(ng/ml).

Development and application of Peptide Nucleic Acid Fluorescence in situ Hybridization for the specific detection of Listeria monocytogenes

Listeria monocytogenes is one of the most important foodborne pathogens due to the high hospitalization and mortality rates associated to an outbreak. Several new molecular methods that accelerate the identification of L. monocytogenes have been developed, however conventional culture-based methods still remain the gold standard. In this work we developed a novel Peptide Nucleic Acid Fluorescence in situ Hybridization (PNA-FISH) method for the specific detection of L. monocytogenes. The method was based on an already existing PNA probe, LmPNA1253, coupled with a novel blocker probe in a 1:2 ratio. The method was optimized for the detection of L. monocytogenes in food samples through an evaluation of several rich and selective enrichment broths. The best outcome was achieved using One Broth Listeria in a two-step enrichment of 24 h plus 18 h. For validation in food samples, ground beef, ground pork, milk, lettuce and cooked shrimp were artificially contaminated with two ranges of inoculum: a low level (0.2-2 CFU/25 g or mL) and a high level (2-10 CFU/25 g or mL). The PNA-FISH method performed well in all types of food matrices, presenting an overall accuracy of ≈99% and a detection limit of 0.5 CFU/25 g or mL of food sample.

Designing a new biosensor "DNA ELISA" to detect Escherichia coli using genomic DNA and comparison of this method to PCR-ELISA

In this experiment, DNA-ELISA biosensor was introduced, bearing the ability to detect specific bacteria in about 4 h. This is a more rapid system in comparison to conventional methods, like colony counting method. Moreover, this method does not require any amplification and directly detects genomic DNA of bacteria, giving a lower limit to the sensitivity of 40,000 bacteria. In this study, two specific probes capture (biotin labelled) and detector (dig labelled), were used against special regions of 16s rRNA gene of Escherichia coli ATCC 25922. The capture probe has the ability to trap the target bacterial DNA from a pool of other kinds of bacteria under specific conditions. The detector probe then was used to hybridize to the genome of trapped bacteria. The detection proceeds by adding HRP-anti dig enzyme and its substrate, ABTS to emit light. Light absorbance is measured for verifying the detection.

Exploratory Investigation of Intestinal Function and Bacterial Translocation After Focal Cerebral Ischemia in the Mouse

Background and Purpose: The gut communicates with the brain bidirectionally via neural, humoral and immune pathways. All these pathways are affected by acute brain lesions, such as stroke. Brain-gut communication may therefore impact on the overall outcome after CNS-injury. Until now, contradictory reports on intestinal function and translocation of gut bacteria after experimental stroke have been published. Accordingly, we aimed to specifically investigate the effects of transient focal cerebral ischemia on intestinal permeability, gut associated lymphoid tissue and bacterial translocation in an exploratory study using a well-characterized murine stroke model.

Methods: After 60 min of middle cerebral artery occlusion (MCAO) we assessed intestinal morphology (time points after surgery day 0, 3, 5, 14, 21) and tight junction protein expression (occludin and claudin-1 at day 1 and 3) in 12-week-old male C57Bl/6J mice. Lactulose/mannitol/sucralose test was performed to assess intestinal permeability 24–72 h after surgery. To investigate the influence of cerebral ischemia on the local immune system of the gut, main immune cell populations in Peyer's patches (PP) were quantified by flow cytometry. Finally, we evaluated bacterial translocation to extraintestinal organs 24 and 72 h after MCAO by microbiological culture and fluorescence in situ hybridization targeting bacterial 16S rRNA.

Results: Transient MCAO decreased claudin-1 expression in the ileum but not in the colon. Intestinal morphology (assessed by light microscopy) and permeability did not change measurably after MCAO. After MCAO, animals had significantly fewer B cells in PP compared to naïve mice.

Conclusions: In a murine model of stroke, which leads to large brain infarctions in the middle cerebral artery territory, we did not find evidence for overt alterations neither in gut morphology, barrier proteins and permeability nor presence of intestinal bacterial translocation.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016-2018)

One of the most cited limitations of capillary and microchip electrophoresis is the poor sensitivity. This review continues to update this series of biannual reviews, first published in Electrophoresis in 2007, on developments in the field of online/in-line concentration methods in capillaries and microchips, covering the period July 2016-June 2018. It includes developments in the field of stacking, covering all methods from field-amplified sample stacking and large-volume sample stacking, through to isotachophoresis, dynamic pH junction, and sweeping. Attention is also given to online or in-line extraction methods that have been used for electrophoresis.

Detecting Biothreat Agents: From Current Diagnostics to Developing Sensor Technologies

Although a fundamental understanding of the pathogenicity of most biothreat agents has been elucidated and available treatments have increased substantially over the past decades, they still represent a significant public health threat in this age of (bio)terrorism, indiscriminate warfare, pollution, climate change, unchecked population growth, and globalization. The key step to almost all prevention, protection, prophylaxis, post-exposure treatment, and mitigation of any bioagent is early detection. Here, we review available methods for detecting bioagents including pathogenic bacteria and viruses along with their toxins. An introduction placing this subject in the historical context of previous naturally occurring outbreaks and efforts to weaponize selected agents is first provided along with definitions and relevant considerations. An overview of the detection technologies that find use in this endeavor along with how they provide data or transduce signal within a sensing configuration follows. Current "gold" standards for biothreat detection/diagnostics along with a listing of relevant FDA approved in vitro diagnostic devices is then discussed to provide an overview of the current state of the art. Given the 2014 outbreak of Ebola virus in Western Africa and the recent 2016 spread of Zika virus in the Americas, discussion of what constitutes a public health emergency and how new in vitro diagnostic devices are authorized for emergency use in the U.S. are also included. The majority of the Review is then subdivided around the sensing of bacterial, viral, and toxin biothreats with each including an overview of the major agents in that class, a detailed cross-section of different sensing methods in development based on assay format or analytical technique, and some discussion of related microfluidic lab-on-a-chip/point-of-care devices. Finally, an outlook is given on how this field will develop from the perspective of the biosensing technology itself and the new emerging threats they may face.

Influence of the fixation/permeabilization step on peptide nucleic acid fluorescence in situ hybridization (PNA-FISH) for the detection of bacteria

Fluorescence in situ Hybridization (FISH) is a versatile, widespread and widely- used technique in microbiology. The first step of FISH—fixation/permeabilization—is crucial to the outcome of the method. This work aimed to systematically evaluate fixation/permeabilization protocols employing ethanol, triton X-100 and lysozyme in conjugation with paraformaldehyde for Peptide Nucleic Acid (PNA)-FISH. Response surface methodology was used to optimize these protocols for Gram-negative (Escherichia coli and Pseudomonas fluorescens) and Gram-positive species (Listeria innocua, Staphylococcus epidermidis and Bacillus cereus). In general, the optimal PNA-FISH fluorescent outcome in Gram-positive bacteria was obtained employing harsher permeabilization conditions when compared to Gram-negative optimal protocols. The observed differences arise from the intrinsic cell envelope properties of each species and the ability of the fixation/permeabilization compounds to effectively increase the permeability of these structures while maintaining structural integrity. Ultimately, the combination of paraformaldehyde and ethanol proved to have significantly superior performance for all tested bacteria, especially for Gram-positive species (p<0.05).

Bacterial diversity and community structure of the intestinal microbiome of Channel Catfish (Ictalurus punctatus) during ontogenesis

The acquisition of gut microbes does not occur randomly and is highly dependent on host factors, environmental cues, and self-assembly rules exerted by the microbes themselves. The main objective of this project was to characterize how the gut microbiome develops during the early life stages of Channel Catfish and to identify i) which bacteria are the main constituents of the gut microbiome at different ontogenesis stages, and ii) at which time point(s) the gut microbiome stabilizes. High-throughput Illumina Miseq DNA sequencing of the V4 domain of the 16S rRNA gene was used to assess the microbial community composition during the life stages of Channel Catfish along with water and feed samples. Microbiomes from fertilized eggs, sac fry, swim up fry, pre-fingerlings, and fingerlings were all significantly distinct. OTUs analyses showed that the phylum Proteobacteria, Firmicutes, Fusobacteria and Cyanobacteria dominated the Channel Catfish gut microbiome. During the early stages of ontogenesis, the fish microbiome was dynamic and highly diverse, with significant shifts occurring between fertilized eggs to sac fry (6dph), and from sac fry to swim up fry (15dph). The gut microbiome stabilized between the pre-fingerlings and fingerlings stage (≤90dph) with an observed reduction in species richness. Feed had a more significantly contribution to the microbial colonization of the gut than water. We have identified the period in which the gut microbiome changes rapidly from 15dph until 21dph before stabilizing after 90dph.

An overview of methods/techniques for the detection of Cryptosporidium in food samples

Cryptosporidium is one of the most important parasitic protozoa of concern within the food production industry, worldwide. This review describes the evolution and its development, and it monitors the methodology that has been used for Cryptosporidium in food material since 1984, when the first publication appeared regarding the detection of Cryptosporidium parvum in food materials. The methods that are currently being used for the detection of Cryptosporidium oocysts in food material (mainly vegetables) and all of the other available published methods are discussed in this review. Generating more consistent and reliable data should lead to a better understanding of the occurrence, transport and fate of the oocysts in food material. Improvements in monitoring and developing effective methodology, along with food security, offer more practical possibilities for both the developed and developing worlds.

Yeasts identification in microfluidic devices using peptide nucleic acid fluorescence in situ hybridization (PNA-FISH)

Peptide nucleic acid fluorescence in situ hybridization (PNA-FISH) is a highly specific molecular method widely used for microbial identification. Nonetheless, and due to the detection limit of this technique, a time-consuming pre-enrichment step is typically required before identification. In here we have developed a lab-on-a-chip device to concentrate cell suspensions and speed up the identification process in yeasts. The PNA-FISH protocol was optimized to target Saccharomyces cerevisiae, a common yeast that is very relevant for several types of food industries. Then, several coin-sized microfluidic devices with different geometries were developed. Using Computational fluid dynamics (CFD), we modeled the hydrodynamics inside the microchannels and selected the most promising options. SU-8 structures were fabricated based on the selected designs and used to produce polydimethylsiloxane-based microchips by soft lithography. As a result, an integrated approach combining microfluidics and PNA-FISH for the rapid identification of S. cerevisiae was achieved. To improve fluid flow inside microchannels and the PNA-FISH labeling, oxygen plasma treatment was applied to the microfluidic devices and a new methodology to introduce the cell suspension and solutions into the microchannels was devised. A strong PNA-FISH signal was observed in cells trapped inside the microchannels, proving that the proposed methodology works as intended. The microfluidic designs and PNA-FISH procedure described in here should be easily adaptable for detection of other microorganisms of similar size.

Diseases and Molecular Diagnostics: A Step Closer to Precision Medicine

The current advent of molecular technologies together with a multidisciplinary interplay of several fields led to the development of genomics, which concentrates on the detection of pathogenic events at the genome level. The structural and functional genomics approaches have now pinpointed the technical challenge in the exploration of disease-related genes and the recognition of their structural alterations or elucidation of gene function. Various promising technologies and diagnostic applications of structural genomics are currently preparing a large database of disease-genes, genetic alterations etc., by mutation scanning and DNA chip technology. Further the functional genomics also exploring the expression genetics (hybridization-, PCR- and sequence-based technologies), two-hybrid technology, next generation sequencing with Bioinformatics and computational biology. Advances in microarray “chip” technology as microarrays have allowed the parallel analysis of gene expression patterns of thousands of genes simultaneously. Sequence information collected from the genomes of many individuals is leading to the rapid discovery of single nucleotide polymorphisms or SNPs. Further advances of genetic engineering have also revolutionized immunoassay biotechnology via engineering of antibody-encoding genes and the phage display technology. The Biotechnology plays an important role in the development of diagnostic assays in response to an outbreak or critical disease response need. However, there is also need to pinpoint various obstacles and issues related to the commercialization and widespread dispersal of genetic knowledge derived from the exploitation of the biotechnology industry and the development and marketing of diagnostic services. Implementation of genetic criteria for patient selection and individual assessment of the risks and benefits of treatment emerges as a major challenge to the pharmaceutical industry. Thus this field is revolutionizing current era and further it may open new vistas in the field of disease management.

Binding of Bacteria to Poly(N-isopropylacrylamide) Modified with Vancomycin: Comparison of Behavior of Linear and Highly Branched Polymers

The behavior of a linear copolymer of N-isopropylacrylamide with pendant vancomycin functionality was compared to an analogous highly branched copolymer with vancomycin functionality at the chain ends. Highly branched poly(N-isopropylacrylamide) modified with vancomycin (HB-PNIPAM-van) was synthesized by functionalization of the HB-PNIPAM, prepared using reversible addition-fragmentation chain transfer polymerization. Linear PNIPAM with pendant vancomycin functionality (L-PNIPAM-van) was synthesized by functionalization of poly(N-isopropylacrylamide-co-vinyl benzoic acid). HB-PNIPAM-van aggregated S. aureus effectively, whereas the L-PNIPAM-van polymer did not. It was found that when the HB-PNIPAM-van was incubated with S. aureus the resultant phase transition provided an increase in the intensity of fluorescence of a solvatochromic dye, nile red, added to the system. In contrast, a significantly lower increase in fluorescence intensity was obtained when L-PNIPAM-van was incubated with S. aureus. These data showed that the degree of desolvation of HB-PNIPAM-van was much greater than the desolvation of the linear version. Using microcalorimetry, it was shown that there were no significant differences in the affinities of the polymer ligands for d-Ala-d-Ala and therefore differences in the interactions with bacteria were associated with changes in the probability of access of the polymer bound ligands to the d-Ala-d-Ala dipeptide. The data support the hypothesis that generation of polymer systems that respond to cellular targets, for applications such as cell targeting, detection of pathogens etc., requires the use of branched polymers with ligands situated at the chain ends.

Ca2+ in Hybridization Solutions for Fluorescence in situ Hybridization Facilitates the Detection of Enterobacteriaceae

Fluorescence in situ hybridization (FISH) has been employed to identify microorganisms at the single cell level under a microscope. Extensive efforts have been made to improve and extend the FISH technique; however, the development of a widely applicable protocol is a continuing challenge. The present study evaluated the effects of divalent cations in the hybridization solution on the FISH-based detection of various species of bacteria and archaea with rRNA-targeted probes. A flow cytometric analysis after FISH with a standard hybridization buffer detected positive signals from less than 30% of Escherichia coli IAM 1264 cells. However, the number of cells with positive signals increased to more than 90% after the addition of calcium chloride to the hybridization buffer. Mn²⁺ also had positive effects, whereas Mg²⁺ did not. The positive effects of Ca²⁺ were similarly observed for bacteria belonging to Enterobacteriaceae, including Enterobacter sakazakii IAM 12660^T, E. aerogenes IAM 12348, Klebsiella planticola IAM 14202, and Salmonella enterica subsp. enterica serovar Typhimurium strain LT2. These results indicate that the supplementation of Ca²⁺ to the hybridization buffer for FISH contributes to the efficient detection of Enterobacteriaceae cells.