Efficacy of pullulan in emulsification of turmeric oleoresin and its subsequent microencapsulation

Impact of thermal processing and emulsification methods on spice oleoresin blending: Insights for flavor release and emulsion stability

This study investigated the effect of heat treatments on the pungency and aroma profiles of a spice oleoresin blend, and the emulsion stability with different surfactants, encapsulating agents, and homogenization mechanisms. Total pungency increased with heat until 120 °C and drastically reduced at 150 °C. Thermal processing induced aroma release, and 46 compounds were identified at 90 °C, predominantly comprising sesquiterpenes. Tween 80 dispersed the highest oleoresin mass (6.21 ± 0.31 mg/mL) and reported the maximum emulsion stability index. The oleoresin percentage significantly influenced the emulsion stability, with 1% oleoresin producing the most stable emulsion. High-pressure homogenization applied on gum Arabic resulted in a greater encapsulation efficiency, exceeding 86%, and the lowest creaming index (4.70 ± 0.06%), while Hi-Cap 100 produced the best flow properties. The findings provide insights into incorporating lipophilic spice oleoresin blends in aqueous food systems and understanding the release of flavor compounds during thermal food processing.

Fabrication and characterization of octenyl succinic anhydride modified pullulan micelles for encapsulating curcumin

BACKGROUND

Curcumin has become increasingly popular in functional foods and beverages field as a result of its high biological activity. Nevertheless, the application of curcumin is usually limited by its poor water solubility, low absorption, rapid metabolism and instability. Accordingly, the development of an appropriate wall material is crucial for its effective use. In the present study, curcumin-octenyl succinic anhydride modified pullulan (Cur-OSAP) micelles were successfully prepared by an anti-solvent co-precipitation method.

RESULTS

Octenyl succinic anhydride modified pullulan (OSAP) micelles exhibited the highest encapsulation efficiency (57.31%) and loading capacity (5.73%) of curcumin when the mass ratio of OSAP to curcumin was 10:1 and the degree of substitution of OSAP was 0.0469, at which point Cur-OSAP micelles formed via hydrogen binding and hydrophobic interactions, as confirmed by Fourier transform infrared and fluorescence techniques. The transmission electron microscopy results showed that the Cur-OSAP micelles were roughly spherical in shape with diameters in the approximate range 30-60 nm.

CONCLUSION

The encapsulation of OSAP greatly improved photostability and sustained release properties of curcumin in Cur-OSAP micelles. These findings suggest that OSAP can be used as a carrier to encapsulate and protect hydrophobic food ingredients. © 2021 Society of Chemical Industry.

An innovative approach using microencapsulated turmeric oleoresin to develop ready-to-use turmeric milk powder with enhanced oral bioavailability

The use of phytochemicals for nutritional wellness has attracted worldwide attention and resulted in development of innovative formulations. Turmeric latte is one such formulation. However, an in-depth study on its physicochemical properties and oral bioavailability has not been conducted as yet. We present a ready-to-use turmeric latte by microencapsulating turmeric oleoresin (TO) with a blend of gum acacia, maltodextrin, and dairy whitener (DW) with bioenhancers by spray drying. The microencapsulated powder obtained exhibited >95% encapsulation efficiency, desired curcumin content, of 539.98 ± 6.56 to 706.40 ± 5.25 mg/100 g, wettability time below 40 s, and dispersibility above 95%. Turmeric latte released >95% of curcumin at pH 1.2 HCl with 0.1% Tween 80, which was ascribed in part to curcumin amorphization as evidenced by DSC and XRD. Turmeric latte demonstrated superior antioxidant activity with 4.2-fold enhanced permeability through non-everted rat intestine and 4.9-fold higher oral bioavailability in rats confirming bioenhancement.

Microstructures of encapsulates and their relations with encapsulation efficiency and controlled release of bioactive constituents: A review

Vitamins, peptides, essential oils, and probiotics are examples of health beneficial constituents, which are nevertheless heat-sensitive and possess poor chemical stability. Various encapsulation methods have been applied to protect these constituents against thermal and chemical degradations. Encapsulates prepared by different methods and/or at different conditions exhibit different microstructures, which in turn differently influence the encapsulation efficiency as well as retention of encapsulated core materials. This review provides a summary of various microstructures resulted from the use of selected encapsulation methods or systems, namely, spray coating; co-extrusion; emulsion-, micelle-, and liposome-based; coacervation; and ionic gelation encapsulation, at different conditions. Subsequent effects of the different microstructures on encapsulation efficiency and retention of encapsulated core materials are mentioned and discussed. Encapsulates having compact microstructures resulted from the use of low-surface tension and low-viscosity encapsulants, high-stability encapsulation systems, lower loads of core materials to total solids of encapsulants and appropriate solidification conditions have proved to exhibit higher encapsulation efficiencies and better retention of encapsulated core materials. Encapsulates with hollow, dent, shrunken microstructures or thinner walls resulted from inappropriate solidification conditions and higher loads of core materials, on the other hand, possess lower encapsulation efficiencies and protection capabilities. Encapsulates having crack, blow-hole or porous microstructures resulted from the use of high-viscosity encapsulants and inappropriate solidification conditions exhibit the lowest encapsulation efficiencies and poorest protection capabilities. Compact microstructures and structures formed between ionic biopolymers could be used to regulate the release of encapsulated cores.

Pectin/pullulan blend films for food packaging: Effect of blending ratio

Edible films were prepared using various pectin and pullulan mixing ratios and evaluated for their properties in food packaging applications. FTIR characterization showed that an intermolecular H-bond was formed between the hydroxyl group of pullulan and the carboxyl group of pectin. As observed by FE-SEM, as the pullulan content increased, the film's surface became smoother and formed a film with a denser structure, leading to an increased water vapor barrier. The blend film with a 50:50 ratio of pullulan and pectin exhibited the highest thermal stability and surface hydrophobicity. Blending also increased strength while maintaining flexibility and stiffness compared to the individual films. Besides, the films with ratios above 50:50 displayed the least water and oil absorption values.

Comparison of Emulsion and Nanoemulsion Delivery Systems: The Chemical Stability of Curcumin Decreases as Oil Droplet Size Decreases

The water dispersibility, chemical stability, and bioaccessibility of curcumin, a labile hydrophobic nutraceutical, can be enhanced by incorporating it inside the oil droplets of oil-in-water emulsions or nanoemulsions. In these multiphase systems, the curcumin remains relatively stable to degradation when surrounded by oil but degrades rapidly when surrounded by water. We hypothesized that the size of the lipid droplets would therefore impact the stability of encapsulated curcumin by altering the surface area of oil exposed to water. The effect of droplet surface area on the kinetics of curcumin degradation was therefore studied by producing emulsions with different mean droplet diameters (d₃₂) and therefore different specific surface areas (A_S): large (d₃₂ = 20.9 μm; A_S = 300 m² kg^-1); medium (d₃₂ = 2.53 μm; A_S = 2500 m² kg^-1); small (d₃₂ = 0.26 μm; A_S = 24,000 m² kg^-1); and very small (d₃₂ = 0.083 μm; A_S = 80,000 m² kg^-1) emulsions. All the emulsions initially had milky-yellow appearances and were relatively stable to aggregation during the course of the experiments. However, rapid creaming was observed in the large and medium emulsions because of their relatively large droplet size. The emulsions all exhibited some color fading during storage, with the rate of curcumin degradation increasing with decreasing droplet size. For instance, the percentage of curcumin remaining in the emulsions after 17 days storage was 91.4 ± 1.5 > 77.3 ± 6.6 > 66.7 ± 1.9 ≫ 30.6 ± 2.8% for the large, medium, small, and very small emulsions, respectively. The more rapid chemical degradation of the curcumin in the smaller droplets can be attributed to the fact that curcumin exchange between the interior and exterior of the droplets occurs more rapidly as the droplet dimensions decrease. Our results indicate that the droplet size plays a critical role in the degradation of curcumin encapsulated in emulsions, which may have important consequences for the formulation of curcumin-enriched foods and beverages with enhanced bioactivity. In particular, it suggests that emulsions are more effective at chemically stabilizing curcumin than nanoemulsions.

Microparticles, Microspheres, and Microcapsules for Advanced Drug Delivery

Microparticles, microspheres, and microcapsules are widely used constituents of multiparticulate drug delivery systems, offering both therapeutic and technological advantages. Microparticles are generally in the 1–1000 µm size range, serve as multiunit drug delivery systems with well-defined physiological and pharmacokinetic benefits in order to improve the effectiveness, tolerability, and patient compliance. This paper reviews their evolution, significance, and formulation factors (excipients and procedures), as well as their most important practical applications (inhaled insulin, liposomal preparations). The article presents the most important structures of microparticles (microspheres, microcapsules, coated pellets, etc.), interpreted with microscopic images too. The most significant production processes (spray drying, extrusion, coacervation, freeze-drying, microfluidics), the drug release mechanisms, and the commonly used excipients, the characterization, and the novel drug delivery systems (microbubbles, microsponges), as well as the preparations used in therapy are discussed in detail.

Curcumin encapsulation in submicrometer spray-dried chitosan/Tween 20 particles

Optimal curcumin delivery for medicinal applications requires a drug delivery system that both solubilizes curcumin and prevents degradation. To achieve this, curcumin has been encapsulated in submicrometer chitosan/Tween 20 particles via a benchtop spray-drying process. Spray-drying parameters have been optimized using a Taguchi statistical approach to minimize particle size and to favor spheroid particles with smooth surfaces, as evaluated with scanning electron microscopy (SEM) imaging. Nearly spherical particles with 285 ± 30 nm diameter and 1.21 axial ratio were achieved. Inclusion of curcumin in the spray-drying solution results in complete encapsulation of curcumin within the chitosan/Tween 20 particles. Release studies confirm that curcumin can be released completely from the particles over a 2 h period.