UHPLC–MS/MS highly sensitive determination of aflatoxins, the aflatoxin metabolite M1 and ochratoxin A in baby food and milk

Occurrence, evaluation, and human health risk assessment of ochratoxin a in infant formula and cereal-based baby food: a global literature systematic review

This study reviews global levels of ochratoxin A (OTA) in infant formula and cereal-based foods, using Monte Carlo simulation to assess risks. The review found 24 studies on global OTA levels in infant food and cereal-based products, using databases including PubMed, Scopus, Web of Science and Embase until March 2024. We estimated OTA exposure in infant food based on concentration, intake and body weight. The exposure and hazard quotient margin were calculated using BMDL10 and TDI values. Monte Carlo simulation evaluated human health risks from OTA in infant formula and cereal-based foods. A global study from 14 countries shows varying levels, surpassing EU limits in Tunisia, Ecuador, the USA, and generally in Africa, notably in infant cereals, which had higher levels than formula. Globally, OTA was present in 29.3% of the 3348 samples analyzed, with Lebanon at 95.2% and Brazil at 0%. Analysis indicates only non-carcinogenic risk for infants. While health risks for infants are mostly low, ongoing research and monitoring are vital to minimize OTA exposure in infant food.

Determination of multiple mycotoxins in chili powder using cold-induced liquid-liquid extraction and Fe3O4@MWCNTs-NH2 coupled with UPLC-Q-TOF/MS

Food matrix interference is still a big challenge in analyzing multiclass mycotoxins. Herein, a novel cold-induced liquid-liquid extraction-magnetic solid phase extraction (CI-LLE-MSPE) coupled with ultra-high performance liquid chromatography-quadrupole time of flight mass spectrometry (UPLC-Q-TOF/MS) method was explored for the simultaneous determination of multiple mycotoxins in chili powders. Fe₃O₄@MWCNTs-NH₂ nanomaterials were prepared and characterized, and the factors affecting the MSPE process were investigated. Based on this, the CI-LLE-MSPE-UPLC-Q-TOF/MS method was established for determining ten mycotoxins in chili powders. The proffered technique eliminated the matrix interference effectively and demonstrated strong linearity (0.5-500 µg/kg, R² ≥ 0.999), high sensitivity (limit of quantification was 0.5-1.5 µg/kg), and the recovery was 70.6%-111.7%. The extraction process is simpler than conventional methods, as the adsorbent can be separated using magnets, and reusable adsorbents are beneficial in reducing costs. In addition, the method can provide a valuable reference for pretreatment procedures for other complex matrices.

The Investigation of Mycotoxins and Enterobacteriaceae of Cereal-Based Baby Foods Marketed in Turkey

In this study, a total of 85 cereal-based baby foods with or without milk (four different brands; A, B, C, and D) collected from Ankara local markets, Turkey were analyzed for mycotoxins, total aerobic mesophilic bacteria (TAMB), and Enterobacteriaceae contamination. Baby foods were analyzed for 12 toxicological important mycotoxins such as aflatoxin B1, B2, G1, and G2; fumonisin B1 and B2; ochratoxin A; sterigmatocystin (STE); deoxynivalenol (DON); zearalenone (ZON); and T-2 toxin and HT-2 toxin by LC-MS/MS multi-mycotoxin method. In addition to these mycotoxins, the presence of aflatoxin M1 (AFM1) was investigated in baby foods containing milk. The classical culture method was used for microbiological analysis. Consequently, at least one mycotoxin was detected in 69.41% of the total samples. The most frequently detected mycotoxins were STE (34.12%) and HT-2 (34.12%). However, AFM1 was not detected in any of the baby foods containing milk. Also, TAMB and Enterobacteriaceae were isolated from 30.59% and 10.59% of samples, respectively. As a result, it was determined that the mycotoxin levels in the analyzed samples were in accordance with the mycotoxin levels specified in the Turkish Food Codex.

Recent Advances in Conventional Methods and Electrochemical Aptasensors for Mycotoxin Detection

The presence of mycotoxins in foodstuffs and feedstuffs is a serious concern for human health. The detection of mycotoxins is therefore necessary as a preventive action to avoid the harmful contamination of foodstuffs and animal feed. In comparison with the considerable expense of treating contaminated foodstuffs, early detection is a cost-effective way to ensure food safety. The high affinity of bio-recognition molecules to mycotoxins has led to the development of affinity columns for sample pre-treatment and the development of biosensors for the quantitative analysis of mycotoxins. Aptamers are a very attractive class of biological receptors that are currently in great demand for the development of new biosensors. In this review, the improvement in the materials and methodology, and the working principles and performance of both conventional and recently developed methods are discussed. The key features and applications of the fundamental recognition elements, such as antibodies and aptamers are addressed. Recent advances in aptasensors that are based on different electrochemical (EC) transducers are reviewed in detail, especially from the perspective of the diagnostic mechanism; in addition, a brief introduction of some commercially available mycotoxin detection kits is provided.

Development of a microarray lateral flow strip test using a luminescent organic compound for multiplex detection of five mycotoxins

While lateral flow immunoassay (LFIA) is a simple technique that offers a rapid, robust, user friendly, and point-of-care test, its capacity for multiplex detection is rather limited. This study therefore combined the multiplexity of microarray technique and the simple and rapid characteristics of LFIA to enable simultaneous and quantitative detection of five mycotoxins, namely aflatoxin B1 (AFB1), deoxynivalenol (DON), fumonisin B1 (FUMB1), T-2 toxin (T-2), and zearalenone (ZON). In addition, we have synthesized a novel extra-large Stokes shift and strong fluorescence organic compound to be used as a reporter molecule which can be detected under UV light without light filter requirement. Many parameters including microarray spotting buffer, blocking buffer, and concentrations of mycotoxin antibodies were optimized for the microarray LFIA (μLFIA) construction. With the optimal conditions, the μLFIA could accurately and quantitatively detect multiple mycotoxins at the same time. The limits of detection of AFB1, DON, FUMB1, T-2, and ZON were 1.3, 0.5, 0.4, 0.4, and 0.9 ppb, respectively. The recoveries of these five mycotoxins were 70.7%-119.5% and 80.4%-124.8% for intra-assay and inter-assay, respectively. Combining the advantages of the novel reporter molecule and the multiplex capability of μLFIA test, this system could simultaneously detect multiple mycotoxins in one sample with high specificity and high sensitivity. Moreover, this system presents a promising affordable point-of-care platform to detect other analytes as well.

Mycotoxins in artisanal beers: An overview of relevant aspects of the raw material, manufacturing steps and regulatory issues involved

The consumption of artisanal beer has increased worldwide. Artisanal beers can include malted or unmalted wheat, maize, rice and sorghum, in addition to the basic ingredients. These grains can be infected by toxigenic fungi in the field or during storage and mycotoxins can be produced if they find favorable conditions. Mycotoxins may not be eliminated throughout the beer brewing and be detected in the final product. In addition, modified mycotoxins may also be formed during beer brewing. This review compiles relevant information about mycotoxins produced by Aspergillus, Fusarium and Penicillium in raw material of artisanal beer, as well as updates information about the production and fate of mycotoxins during the beer brewing process. Findings highlight that malting conditions favor the production of mycotoxins by the fungi contaminating cereals. Therefore, good agricultural and postharvest mitigation strategies are the most effective options for preventing the growth of toxigenic fungi and the production of mycotoxins in cereals. However, the final concentration of mycotoxin in artisanal beer is difficult to predict as it depends on the initial concentration contained in the raw material and the processing conditions. The current lack of limits of mycotoxins in artisanal beer underestimates possible risks to human health. In addition, modified mycotoxins, not detected by conventional methods, may be formed in artisanal beers. Maximum tolerated limits for these contaminants must be urgently established based on scientific data about transfer of mycotoxins throughout the artisanal beer brewery process.

Mycotoxins in food: a review on liquid chromatographic methods coupled to mass spectrometry and their experimental designs

The development of a multi-mycotoxins method using LC-MS/MS is necessary and it is clear that the development of such method involves many compromises in the choice of the different parameters. This review summarizes applications using conventional experimental designs and some recent studies using response surface methodology (RSM) as a mathematical modeling tool for the optimization of extraction procedures. The authors also discuss pros and cons of the different procedures. To our knowledge, it is the first review on experimental design for the development of multi-mycotoxin methods. This review could be useful in the development and optimization of LC-MS/MS methods with the aim of describing experimental design and variables (factors) that are likely to affect sensitivity and specificity.

Risk assessment of ochratoxin A in food

The European Commission asked EFSA to update their 2006 opinion on ochratoxin A (OTA) in food. OTA is produced by fungi of the genus Aspergillus and Penicillium and found as a contaminant in various foods. OTA causes kidney toxicity in different animal species and kidney tumours in rodents. OTA is genotoxic both in vitro and in vivo; however, the mechanisms of genotoxicity are unclear. Direct and indirect genotoxic and non-genotoxic modes of action might each contribute to tumour formation. Since recent studies have raised uncertainty regarding the mode of action for kidney carcinogenicity, it is inappropriate to establish a health-based guidance value (HBGV) and a margin of exposure (MOE) approach was applied. For the characterisation of non-neoplastic effects, a BMDL 10 of 4.73 μg/kg body weight (bw) per day was calculated from kidney lesions observed in pigs. For characterisation of neoplastic effects, a BMDL 10 of 14.5 μg/kg bw per day was calculated from kidney tumours seen in rats. The estimation of chronic dietary exposure resulted in mean and 95th percentile levels ranging from 0.6 to 17.8 and from 2.4 to 51.7 ng/kg bw per day, respectively. Median OTA exposures in breastfed infants ranged from 1.7 to 2.6 ng/kg bw per day, 95th percentile exposures from 5.6 to 8.5 ng/kg bw per day in average/high breast milk consuming infants, respectively. Comparison of exposures with the BMDL 10 based on the non-neoplastic endpoint resulted in MOEs of more than 200 in most consumer groups, indicating a low health concern with the exception of MOEs for high consumers in the younger age groups, indicating a possible health concern. When compared with the BMDL 10 based on the neoplastic endpoint, MOEs were lower than 10,000 for almost all exposure scenarios, including breastfed infants. This would indicate a possible health concern if genotoxicity is direct. Uncertainty in this assessment is high and risk may be overestimated.

Current research and prevention of aflatoxins in China

Since their discovery in the 1960s, aflatoxins were found to have a considerable impact on the health of humans and animals as well as the country’s economy and international trade. Aflatoxins are often found in nuts, cereals and animal feeds, which has a significant danger to the food industry. Over the years, several steps have been undertaken worldwide to minimise their contamination in crops and their exposure to humans and animals. China is one of the largest exporters and importers of food and animal feed. As a result, many studies have been carried out in China related to aflatoxins, including their distribution, pollution, detection methods, monitoring, testing and managing. Chinese scientists studied aflatoxins in microbiological, toxicological, ecological effects as well as policies relating to their controlling. China has thus put into practice a number of strategies aiming at the prevention and control of aflatoxins in order to protect consumers and ensure a safe trade of food and feed, and the status and enlargement of these strategies are very important and useful for many consumers and stakeholders in China. Therefore, this article aims at the detriment assessments, regulations, distribution, detection methods, prevention and control of aflatoxins in China. It equally provides useful information about the recent safety management systems in place to fight the contamination of aflatoxins in food and feed in China.

Generic and rapid determination of low molecular weight organic chemical contaminants in protein powder by using ultra-performance liquid chromatography-tandem mass spectrometry

A rapid, simple, and generic analytical method that could simultaneously determine 291 undesirable low molecular weight chemical contaminants from different drug families in protein powder, such as veterinary drugs and pesticides, etc, had been developed. This method comprised the extraction with acetonitrile-dimethyl sulfoxide (DMSO), clean-up through dispersive solid phase extraction (D-SPE) and low temperature filtration, and analysis by ultra-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry at multiple-reaction monitoring mode. Acetonitrile-DMSO was more generic than acetonitrile or methanol for the extraction of large-scale organic chemical contaminants with different polarities in protein powder. Most interferences in the extract were eliminated by the combination of D-SPE and low temperature filtration, which simultaneously provided satisfactory recoveries of both hydrophobic and hydrophilic analytes. In particular, besides the purification function, the sorbent of D-SPE also played an important role in grinding samples to improve extraction efficiency during homogenization. This streamlined approach allowed the processes of extraction and the main purification were carried out in one-step, and dramatically reduced sample preparation turnaround times and solvent consumption. For quantification, matrix-fortified calibration curves showed competent linearity for most of the target compounds with linear regression coefficients (r) higher than 0.9900, except for two analytes. The limits of quantification ranged from 0.1 μg/kg to 50 μg/kg, which was usually sufficient to verify the compliance of products with legal tolerances. The average recoveries for spiked protein powder ranged from 65.6% to 142.2% with associated RSD values between 0.5% and 28.5%. For over 90% of the analytes, the recoveries were between 70% and 120% with RSD values in the range of 1%-15%. Applying this method in routine monitoring programs would drastically reduce both effort and time.

Adverse Effects, Transformation and Channeling of Aflatoxins Into Food Raw Materials in Livestock

Aflatoxins are wide-spread harmful carcinogenic secondary metabolites produced by Aspergillus species, which cause serious feed and food contaminations and affect farm animals deleteriously with acute or chronic manifestations of mycotoxicoses. On farm, both pre-harvest and post-harvest strategies are applied to minimize the risk of aflatoxin contaminations in feeds. The great economic losses attributable to mycotoxin contaminations have initiated a plethora of research projects to develop new, effective technologies to prevent the highly toxic effects of these secondary metabolites on domestic animals and also to block the carry-over of these mycotoxins to humans through the food chain. Among other areas, this review summarizes the latest findings on the effects of silage production technologies and silage microbiota on aflatoxins, and it also discusses the current applications of probiotic organisms and microbial products in feeding technologies. After ingesting contaminated foodstuffs, aflatoxins are metabolized and biotransformed differently in various animals depending on their inherent and acquired physiological properties. These mycotoxins may cause primary aflatoxicoses with versatile, species-specific adverse effects, which are also dependent on the susceptibility of individual animals within a species, and will be a function of the dose and duration of aflatoxin exposures. The transfer of these undesired compounds from contaminated feed into food of animal origin and the aflatoxin residues present in foods become an additional risk to human health, leading to secondary aflatoxicoses. Considering the biological transformation of aflatoxins in livestock, this review summarizes (i) the metabolism of aflatoxins in different animal species, (ii) the deleterious effects of the mycotoxins and their derivatives on the animals, and (iii) the major risks to animal health in terms of the symptoms and consequences of acute or chronic aflatoxicoses, animal welfare and productivity. Furthermore, we traced the transformation and channeling of Aspergillus-derived mycotoxins into food raw materials, particularly in the case of aflatoxin contaminated milk, which represents the major route of human exposure among animal-derived foods. The early and reliable detection of aflatoxins in feed, forage and primary commodities is an increasingly important issue and, therefore, the newly developed, easy-to-use qualitative and quantitative aflatoxin analytical methods are also summarized in the review.

A Novel Graphene Oxide-Based Aptasensor for Amplified Fluorescent Detection of Aflatoxin M1 in Milk Powder

In this paper, a rapid and sensitive fluorescent aptasensor for the detection of aflatoxin M1 (AFM1) in milk powder was developed. Graphene oxide (GO) was employed to quench the fluorescence of a carboxyfluorescein-labelled aptamer and protect the aptamer from nuclease cleavage. Upon the addition of AFM1, the formation of an AFM1/aptamer complex resulted in the aptamer detaching from the surface of GO, followed by the aptamer cleavage by DNase I and the release of the target AFM1 for a new cycle, which led to great signal amplification and high sensitivity. Under optimized conditions, the GO-based detection of the aptasensor exhibited a linear response to AFM1 levels in a dynamic range from 0.2 to 10 μg/kg, with a limit of detection (LOD) of 0.05 μg/kg. Moreover, the developed aptasensor showed a high specificity towards AFM1 without interference from other mycotoxins. In addition, the technique was successfully applied for the detection of AFM1 in infant milk powder samples. The aptasensor proposed here offers a promising technology for food safety monitoring and can be extended to various targets.

Multi-mycotoxins analysis in liquid milk by UHPLC-Q-Exactive HRMS after magnetic solid-phase extraction based on PEGylated multi-walled carbon nanotubes

A simple and rapid magnetic solid-phase extraction (MSPE) method using PEGylated multi-walled carbon nanotubes magnetic nanoparticles (PEG-MWCNTs-MNP) as absorbents is proposed for isolation and enrichment of aflatoxin B₁ (AFB₁), aflatoxin B₂ (AFB₂), aflatoxin G₁ (AFG₁), aflatoxin G₂ (AFG₂), aflatoxin M₁ (AFM₁), aflatoxin M₂ (AFM₂), ochratoxin A (OTA), zearalenone (ZEA), zearalanone (ZAN), α-zeralanol (α-ZAL), β-zeralanol (β-ZAL), α-zeralenol (α-ZOL), and β-zeralenol (β-ZOL) from liquid milk. Combined with ultra-high performance liquid chromatography Q-Exactive high resolution mass spectrometry, simultaneous qualification of these mycotoxins was achieved with sensitivity and specificity. The proposed method showed a good linearity (R² ≥ 0.995), high sensitivity (limit of detection in the range of 0.005-0.050 μg/kg and limit of quantification in the range of 0.015-0.150 μg/kg), adequate recovery (81.8-106.4%), and good repeatability (intra-day precision in the range of 2.1-8.5% and inter-day precision in the range of 3.9-11.7%). It has been successfully applied to the determination of 13 mycotoxins in real liquid milk samples.

Separation and Purification of Aflatoxins by Centrifugal Partition Chromatography

Aflatoxins are mycotoxins that are produced by several species of filamentous fungi. In the European Union, the concentration limits for this group of mycotoxins in food and feed products are very low (on the order of parts per billion). Thus, relatively high amounts of these substances in their pure forms are required as reference standards. Chromatographic techniques based on solid stationary phases are generally used to purify these molecules; however, liquid–liquid chromatographic separations may be a promising alternative. Therefore, this study proposes a liquid–liquid chromatographic method for the separation of four aflatoxins and impurities. To optimise the method, numerous biphasic solvent systems (chloroform-, acetone- and acetic acid-based systems) were tested and evaluated in terms of their effectiveness at partitioning aflatoxins; the toluene/acetic acid/water (30:24:50, v/v/v/%) system was found to be the most efficient for application in centrifugal partition chromatographic instrument. Using liquid–liquid instrumental separation, the four aflatoxins, namely B₁ (400 mg), B₂ (34 mg), G₁ (817 mg) and G₂ (100 mg), were successfully isolated with 96.3%–98.2% purity from 4.5 L of Aspergillus parasiticus fermented material in a 250 mL centrifugal partition chromatography column. The identities and purities of the purified components were confirmed, and the performance parameters of each separation step and the whole procedure was determined. The developed method could be effectively used to purify aflatoxins for analytical applications.

Safety evaluation of Semen Sojae Preparatum based on simultaneous LC-ESI-MS/MS quantification of aflatoxin B1 , B2 , G1 , G2 and M1

Semen Sojae Preparatum (SSP) is one of the most widely used traditional Chinese medicines, and is also a functional food. However, contamination with aflatoxins may occur in the fermentation process. To evaluate its safety, an accurate and rapid LC-ESI-MS/MS analytical method was developed and validated for the simultaneous determination of AFB₁ , AFB₂ , AFG₁ , AFG₂ and AFM₁ in SSP. After a simple ultrasonic extraction of SSP samples, chromatographic separation was achieved on an Agilent Zorbax SB-C₁₈ column (2.1 × 50 mm, 3.5 μm) with a flow rate of 0.50 mL/min. The gradient elution program was performed using a mobile phase consisting of water and acetonitrile, both containing 0.1% formic acid. Detection of five aflatoxins was based on triple quadrupole mass spectrometry using a multiple reaction monitoring mode with an electrospray ionization source. SSP is likely to be contaminated by aflatoxins in the processes of fermentation, storage, transportation and usage, and it is necessary to strictly monitor it. Artemisia annua L. and Morus alba L. may inhibit the production and growth of AFB₁ - and AFB₂ -producing fungi, which has a certain detoxification effect on contamination with aflatoxins in SSP.

Occurrence and Exposure Assessment of Aflatoxins and Deoxynivalenol in Cereal-Based Baby Foods for Infants

Aflatoxins are carcinogenic to humans and deoxynivalenol causes digestive disorders, and both mycotoxins occur frequently in cereal-based foods. The purpose of this study was to investigate the occurrence and levels of aflatoxins (B1, B2, G1 and G2) and deoxynivalenol (DON) in cereal-based baby foods as well as to calculate the estimated daily intakes (EDI) in different stages of infancy. Sixty samples of infant cereals (wheat-, corn-, rice-, oat-, and mixed grain-based) were collected during a 2-year period and analyzed by validated methods. Aflatoxins were detected in 12 samples (20%), six of which exceeded the EU maximum level for aflatoxin B1 set at 0.10 µg/kg. Deoxynivalenol appeared in 20% of baby food samples, with one sample exceeding the EU maximum level established at 200 µg/kg. There were no significant differences between gluten-free products for babies aged 4⁻6 months and multi-cereal products for infants aged 7⁻12 months, nor between whole-grain-based and refined ingredients. However, baby food products of organic origin showed significantly higher levels of deoxynivalenol than conventional ones (p < 0.05). It is proposed for the health protection of infants and young children, a vulnerable group, to establish the lowest maximum level for the sum of aflatoxins (B1, B2, G1 and G2) in baby food.

Occurrence and Safety Evaluation of Ochratoxin A in Cereal-based Baby Foods Collected from Iranian Retail Market

Contamination of agricultural commodities with ochratoxin A (OTA) is a worldwide concern in recent decades. Consumption of OTA-contaminated baby foods exerts health implications especially in children as the most vulnerable subpopulations. In the current study, for the first time in Iran, 64 baby foods (rice, wheat, and multigrain) samples from five different brands available in the Iranian market were analyzed to determine OTA level, using a HPLC with fluorescence detector. Overall, OTA was observed in 41% of analyzed samples with a mean and maximum level of 0.42 ± 0.27 and 1.1 μg/kg, respectively. OTA levels in five of 64 samples (7.8 %) were higher than the permissible limit recommended by European Commission (permissible limit: 0.5 μg/kg) and OTA levels in two of 64 samples (3.1%) were higher than the standard set by Iranian standard organization (1 μg/kg). The highest OTA contamination was observed in rice-based baby food cereals (1.1 μg/kg; 57% of the samples), followed by wheat-based (23%) and multigrain (20%) samples. OTA intake in infants (≥9 months old) was more than established provisional tolerable weekly intake by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and the European Food Safety Authority (EFSA) (100 and 120 ng OTA per kg of body weight, respectively). OTA content in baby food and cereals, as well as other raw foodstuff should be investigated comprehensively to reduce the exposure rate of young children to OTA.

Rapid Determination of Ochratoxin A in Grape and Its Commodities Based on a Label-Free Impedimetric Aptasensor Constructed by Layer-by-Layer Self-Assembly

A simple and sensitive label-free impedimetric aptasensor for rapid determination of ochratoxin A (OTA) has been developed, which was based on the combination between thiolated aptamer and gold nanoparticles by layer-by-layer self-assembly. Because of the interaction between aptamer and OTA, the relative normalized electron-transfer resistance (ΔR_ct) values obtained by electrochemical impedance spectroscopy (EIS) was proportional to the concentration of OTA and showed a good linear relationship from 0.1 to 10.0 ng/mL, with a lower detection limit (0.030 ng/mL) than one-step thiolated DNA aptasensor. The established method was successfully applied to detect and analyze OTA in table wine and grape juice, and the recovery was 90.56%–104.21% when PVP effective removed of phenolic substances. The label-free impedimetric aptasensor was used for rapid detection and quantitation of OTA in the inoculated grapes with the Aspergillus Nigri (H1), and the production of OTA (62.4 μg/kg, 20 μg/kg) far exceeded the maximum levels of 2 μg/kg after inoculation for three days. The developed method exhibited a good specificity, high sensitivity, time-efficient, and it could be applied to detect the OTA concentration in grape and its commodities.

Label-Free and Redox Markers-Based Electrochemical Aptasensors for Aflatoxin M1 Detection

We performed a comparative analysis of the sensitivity of aptamer-based biosensors for detection mycotoxin aflatoxin M₁ (AFM1) depending on the method of immobilization of DNA aptamers and method of the detection. Label-free electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) for ferrocene labeled neutravidin layers were used for this purpose. Amino-modified DNA aptamers have been immobilized at the surface of polyamidoamine dendrimers (PAMAM) of fourth generation (G4) or biotin-modified aptamers were immobilized at the neutravidin layer chemisorbed at gold surface. In the first case the limit of detection (LOD) has been determined as 8.47 ng/L. In the second approach the LOD was similar 8.62 ng/L, which is below of allowable limits of AFM1 in milk and milk products. The aptasensors were validated in a spiked milk samples with good recovery better than 78%. Comparative analysis of the sensitivity of immuno- and aptasensors was also performed and showed comparable sensitivity.

Distribution Analysis of Twelve Mycotoxins in Corn and Corn-Derived Products by LC-MS/MS to Evaluate the Carry-Over Ratio during Wet-Milling

This study investigated the distribution of twelve mycotoxins (aflatoxins B₁, B₂, G₁, and G₂; ochratoxin A; fumonisins B₁ and B₂; deoxynivalenol; nivalenol; zearalenone; T-2 toxin; and HT-2 toxin) in corn and corn by-products (corn bran, cornstarch, corn gluten, corn gluten feed, corn germ, light steep water, and corn steep liquor) produced by wet-milling in Korea. Fifty-two samples were collected from three factories producing cornstarch and other corn by-products. The samples were pretreated on an immunoaffinity column (IAC), and then the levels of the 12 mycotoxins were analyzed simultaneously by liquid chromatography-coupled triple-quadrupole mass spectrometry (LC-MS/MS). Fusarium mycotoxins were mainly found in raw corn and corn gluten feed samples. Other mycotoxins—such as aflatoxins, ochratoxin A, and HT-2 toxin—were detected in tiny amounts below the limit of quantification (LOQ) in cornstarch, corn germ, and corn bran. Ochratoxin A and nivalenol were mainly carried over into cornstarch. Aflatoxin B₁, deoxynivalenol, T-2 toxin, HT-2 toxin, and the fumonisins were concentrated in corn gluten feed. Zearalenone was evenly distributed in all corn by-products except cornstarch during the milling process.

Application of a LC-MS/MS method for multi-mycotoxin analysis in infant formula and milk-based products for young children commercialized in Southern Brazil

An analytical method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) was validated and applied for the analysis of aflatoxin M₁ (AFM₁), ochratoxin A (OTA) and deoxynivalenol (DON) in infant formula and milk-based products for young children commercialized in Brazil. A total of 38 samples were evaluated, including 12 infant formula, 14 follow-on formula and 12 samples of milk-based products. AFM₁ was detected in 12 (32%) samples, and seven (18%) samples contained AFM₁ levels above the method limit of quantification in a concentration range between 0.013 and 0.067 ng mL^-1 (0.026 ± 0.019). Two samples of milk-based products exceeded the maximum level (ML) fixed by the European Union for AFM₁ in baby foods, however, all samples were in agreement with the levels established by the Brazilian regulation. OTA and DON were not detected in any of the analyzed samples.

Solid phase extraction as sample treatment for the determination of Ochratoxin A in foods: A review

Ochratoxin A (OTA) is a mycotoxin produced by two main types of fungi, Aspergillus and Penicillium species. OTA is a natural contaminant found in a large number of different matrices and is considered as a possible carcinogen for humans. Hence, low maximum permitted levels in foods have been established by competent authorities around the world, making essential the use of very sensitive analytical methods for OTA detection. Sample treatment is a crucial step of analytical methodology to get clean and concentrated extracts, and therefore low limits of quantification. Solid phase extraction (SPE) is a useful technique for rapid and selective sample preparation. This sample treatment enables the concentration and purification of analytes from the sample solution or extract by sorption on a solid sorbent. This review is focused on sample treatment procedures based on SPE prior to the determination of OTA in food matrices, published from 2010.

Validation of a liquid chromatography/tandem mass spectrometry method for the detection of aflatoxin B1 residues in broiler liver

Aflatoxin B₁ is a carcinogenic and mutagenic mycotoxin produced mainly by Aspergillus flavus and Aspergillus parasiticus. It is the predominant mycotoxin found in raw materials used for the manufacture of broiler feeds. The aim of the present study was to develop a new and optimized method for the detection and quantification of aflatoxin B₁ (AFB₁) residues in broiler liver using solid phase extraction (SPE) clean-up and liquid chromatography-electrospray ionization/tandem mass spectrometry (LC-ESI-MS/MS) detection. The method was validated for linearity, accuracy, precision, limit of detection (LOD) and limit of quantification (LOQ). The validation parameters indicated satisfactory linearity (r²>0.99), accuracy and precision (4.57% intra-day RSD; 14.65% inter-day RSD) a very high recovery (99±13%) and high sensitivity achieved for AFB₁ in animal samples (LOD=0.017 and LOQ=0.050ng/g). The method was effective for the detection and quantification of AFB₁ residues in broiler liver and could also be potentially used for detecting AFB₁ in other edible animal tissues after natural or experimental AFB₁ exposure with high sensitivity and precision.

Short communication: Analysis of mycotoxins in Spanish milk

We surveyed the presence of 22 mycotoxins in 191 Spanish cow milk samples. Mycotoxins could be carried over from diet into animal milk and have toxic effects on human and animal health. The interaction of different mycotoxins may be additive or synergetic. Therefore, surveillance of mycotoxin co-occurrence in milk is recommended. Aflatoxins M₁, B₁, B₂, G₁, and G₂, ochratoxins A and B, nivalenol, deoxynivalenol, deepoxy-deoxynivalenol, 3- and 15-acetyldeoxynivalenol, diacetoxyscirpenol, neosolaniol, fusarenon X, T-2 and HT-2 toxins, fumonisins B₁, B₂, and B₃, sterigmatocystin, and zearalenone were analyzed. Samples were treated by liquid-liquid extraction with acidified acetonitrile, followed by an acetonitrile-water phase separation using sodium acetate. The analysis was carried out by HPLC coupled to a triple quadrupole mass spectrometer. None of the analyzed mycotoxins had a concentration level higher than their detection limit (0.05-10.1 µg/L). The aflatoxin M₁ in the samples never exceeded the level established by the European Union.

Determination of aflatoxin M1 in milk and dairy products using high performance liquid chromatography-fluorescence with post column photochemical derivatization

The determination of aflatoxin M₁ in milk using high performance liquid chromatography with photochemical post-column derivatization and fluorescence detection is described. The samples were first extracted and clean-up using the immunoaffinity AFLATEST column originally targeted for aflatoxins B₁, B₂, G₁ and G₂. The separation of aflatoxin M₁ were performed using C18 Hypersil gold (150mm×4.6mm, 5μm) column at 40°C under isocratic elution. Fluorescence detector (FLD) was set at 360nm and 440nm as excitation and emission, respectively. The use of methanol to replace acetonitrile as the mobile phase resulted in ∼67% peak area enhancement of AFM₁. The limit of detection (LOD) and quantification (LOQ) of the analytical method after post-column derivatization without evaporation/reconstitution with mobile phase was 0.0085μgL^-1 and 0.025μgL^-1 respectively. However, LOD and LOQ improved to 0.002 and 0.004μgL^-1 respectively with the addition of evaporation/reconstitution step. The method was statistically validated, showing linear response (R²>0.999), good recoveries (85.2-107.0%) and relative standard deviations (RSD) were found to be ≤7%. The proposed method was applied to determine AFM₁ contamination in various types of milk and milk products. Only 2 samples were contaminated with aflatoxin M₁ (10% incidence). However, the contamination level is below the Malaysian and European legislation limits.

Development of Methods for Determination of Aflatoxins

Aflatoxins can cause damage to the health of humans and animals. Several institutions around the world have established regulations to limit the levels of aflatoxins in food, and numerous analytical methods have been extensively developed for aflatoxin determination. This review covers the currently used analytical methods for the determination of aflatoxins in different food matrices, which includes sampling and sample preparation, sample pretreatment methods including extraction methods and purification methods of aflatoxin extracts, separation and determination methods. Validation for analysis of aflatoxins and safety considerations and precautions when doing the experiments are also discussed.