Extraction characteristics of subcritical water depending on the number of hydroxyl group in flavonols

Identification of Phenolic Compounds in the Invasive Plants Staghorn Sumac and Himalayan Balsam: Impact of Time and Solvent on the Extraction of Phenolics and Extract Evaluation on Germination Inhibition

An HPLC-MS-DAD analysis of phenolic compounds was carried out on the extracts of staghorn sumac (Rhus typhina L.) and Himalayan balsam (Impatiens glandulifera Royle). This study focuses on the influence of solvent type and extraction time on the phenolic extraction efficiency from both invasive plants. Methanol extraction resulted in a 4.2 times higher content of hydroxybenzoic acids, a 3.7 times higher content of hydroxycinnamic acids, a 3.2 times higher content of flavanols, a 9.6 times higher content of flavanones, and an 8.7 times higher content of flavonols in the Himalayan balsam extract compared to aqueous extraction. Anthocyanins were only detected in the alcohol-based extraction. In comparison, the aqueous extraction from staghorn sumac resulted in a higher yield of total hydroxybenzoic acids, hydroxycinnamic acids, and flavonols, while the methanol extraction resulted in a 1.4-fold lower total polyphenolic content compared to the aqueous extraction. The type of solvent had no significant effect on the total content of flavanols in staghorn sumac. Extraction time considerably affected the total phenolic content in both plant extracts. After 84 h of extraction, the staghorn sumac extract showed a 3.5-fold increase in the total phenolic content compared to the initial measurement. In contrast, the Himalayan balsam extract showed a 40% decrease in the total phenolic content after 84 h. The Himalayan balsam extract reduced the germination of perennial ryegrass seeds by 55%, while the staghorn sumac extract reduced it by 80%. Both extracts also inhibited shoot and root growth of perennial ryegrass, although the Himalayan balsam extract at a concentration of 0.125 g/mL stimulated root growth of perennial ryegrass. The strategic use of invasive alien plants could be an effective approach to control their spread in the environment, potentially reducing management costs. The effectiveness of this approach depends largely on the type and content of allelochemicals present in the invasive plants.

Pressurized Hot Water Extraction as Green Technology for Natural Products as Key Technology with Regard to Hydrodistillation and Solid-Liquid Extraction

Hydrodistillation and solid-liquid extraction with organic solvents or supercritical CO2 are standard technologies for natural product manufacturing. Within this technology, portfolio pressurized hot water technology is ranked as a green, sustainable, resilient, kosher and halal manufacturing process. Essential for sustainability is energy integration for heating and cooling the auxiliary water as well as product concentration without evaporation but with the aid of low energy consuming ultra- and nanofiltration membrane technology. The incorporation of modern unit operations, such as pressurized hot water extraction, along with inline measurement devices for Process Analytical Technology approaches, showcases a shift in traditional extraction processes. Traditional equipment and processes still dominate the manufacturing of plant extracts, yet leveraging innovative chemical process engineering methods offers promising avenues for the economic and ecological advancement of botanicals. Techniques such as modeling and process intensification with green technology hold potential in this regard. Digitalization and Industry 4.0 methodologies, including machine learning and artificial intelligence, play pivotal roles in sustaining natural product extraction manufacturing and can profoundly impact the future of human health.

Survival, immune response and growth of Penaeid shrimp as affected by immunostimulants: A meta-analysis

Immunostimulants represent the most innovative approach for combating shrimp diseases. They are molecules that effectively enhance the host's nonspecific defenses against invading microorganisms. However, methodological differences exist among immunostimulants based on the same source. Therefore, conducting a meta-analysis is essential to derive valid conclusions. The effect size value utilized in this study was Hedges' d. Heterogeneity among studies was assessed using the DerSimonian and Laird tests (Q-statistic). Meta-regression analysis was conducted to explore the sources of heterogeneity in treatment effects. In this study, dose served as a covariate because it was the only continuous variable that significantly contributed to the observed heterogeneity. Funnel plots and the fail-safe number were employed to assess publication bias within the datasets. The article collection process followed the PRISMA methodology. Based on the results of the meta-analysis and meta-regression conducted with 83 articles, it can be concluded that immunostimulants have a significant effect, characterized by high category standard mean difference (SMD) values, on the survival, growth, and immune response of Penaeid family shrimp. Among potential immunostimulants options, algae ingredients exhibited the most favorable effects on the survival, growth, and immune response of Penaeid family shrimp. Subgroup analysis outcomes revealed that various extraction methods significantly impacted the efficacy of immunostimulants, with the ethanol solvent method proving to be the most effective. Among different administration methods, no significant effect was observed on immunostimulant efficacy across all parameters, with positive SMD values for all administration methods. Regarding challenged test pathogens, immunostimulants were observed to enhance immune response, survival, and weight gain against various pathogens. Meta-regression results indicated that algal treatments had a lower optimal dose point, leading to decreased efficacy as the dose increased. In contrast, fungi exhibited a higher optimum dose point, resulting in increased efficacy at higher doses.

Comparative Analysis of Fluorescence Emission in Myricetin, Kaempferol, and Quercetin Powders and Solutions

Myricetin is a flavonol with high antioxidant properties. In this research, the fluorescence emission of myricetin powder and its solutions in different solvents were measured and analyzed by comparing with the results of calculations. Comparison of the calculated and measured characteristic wavelengths allowed the identification of all the spectral features in the fluorescence spectra of myricetin powder and solutions with different concentrations. The computation was based on modeling the process of the excited state intermolecular proton transfer, which predicts the formation of tautomeric forms of the flavonol molecule. Characteristic emission wavelengths were obtained using TDDFT/M06-2X/6-31++G(d,p). To understand the influence of the hydroxyl groups in the B-ring of the flavonol molecule on the emission spectrum, we also compared the fluorescence spectra of myricetin with those of kaempferol and quercetin. Moreover, based on the analysis of the changes in the shape of the FL spectra with the concentration of the solution, a criterion for the complete dissolution of the flavonol powders was established, which is important for bioavailability of flavonoids.

Exploring a Sustainable Process for Polyphenol Extraction from Olive Leaves

Olive leaves are residues from pruning and harvesting and are considered an environmental management problems. Interestingly, these residues contain high polyphenol concentrations, which can be used to treat chronic diseases. However, these compounds are a technological challenge due to their thermolability and reactivity during extraction. Thus, this study assessed the use of pressurized liquid extraction (PLE) with green solvents like water-ethanol and water-glycerol mixtures (0-15%) at 50 °C and 70 °C to yield polyphenol-rich antioxidant extracts with reduced glucose and fructose content. The use of 30% ethanol at 70°C presented the highest polyphenol content (15.29 mg gallic acid equivalent/g dry weight) and antioxidant capacity, which was expressed as IC50 (half maximal inhibitory concentration): 5.49 mg/mL and oxygen radical absorbance capacity (ORAC): 1259 μmol Trolox equivalent/g dry weight, as well as lower sugar content (glucose: 3.75 mg/g dry weight, fructose: 5.68 mg/g dry weight) compared to water-glycerol mixtures. Interestingly, ethanol exhibits a higher degree of effectiveness in recovering flavanols, stilbenes and secoiridoids, while glycerol improves the extraction of phenolic acids and flavonols. Therefore, to enhance the efficiency of polyphenol recovery during the PLE process, it is necessary to consider its solvent composition and chemical structure.

Subcritical Water Extraction to Valorize Grape Biomass-A Step Closer to Circular Economy

With the increase in the world population, the overexploitation of the planet's natural resources is becoming a worldwide concern. Changes in the way humankind thinks about production and consumption must be undertaken to protect our planet and our way of living. For this change to occur, sustainable development together with a circular economic approach and responsible consumption are key points. Agriculture activities are responsible for more than 10% of the greenhouse gas emissions; moreover, by 2050, it is expected that food production will increase by 60%. The valorization of food waste is therefore of high importance to decrease the environmental footprint of agricultural activities. Fruits and vegetables are wildly consumed worldwide, and grapes are one of the main producers of greenhouse gases. Grape biomass is rich in bioactive compounds that can be used for the food, pharmaceutical and cosmetic industries, and their extraction from this food residue has been the target of several studies. Among the extraction techniques used for the recovery of bioactive compounds from food waste, subcritical water extraction (SWE) has been the least explored. SWE has several advantages over other extraction techniques such as microwave and ultrasound extraction, allowing high yields with the use of only water as the solvent. Therefore, it can be considered a green extraction method following two of the principles of green chemistry: the use of less hazardous synthesis (principle number 3) and the use of safer solvents and auxiliaries (principle number 5). In addition, two of the green extraction principles for natural products are also followed: the use of alternative solvents or water (principle number 2) and the use of a reduced, robust, controlled and safe unit operation (principle number 5). This review is an overview of the extraction process using the SWE of grape biomass in a perspective of the circular economy through valorization of the bioactive compounds extracted. Future perspectives applied to the SWE are also discussed, as well as its ability to be a green extraction technique.

Enhanced extraction of bioactive compounds from propolis (Apis mellifera L.) using subcritical water

The bioactive compounds and antioxidant activities of propolis extracts were investigated using subcritical water extraction (SWE). SWE was performed by varying temperature (110-200 °C) and time (10-30 min). SWE using only water as solvent successfully to extracted bioactive compounds from propolis using high-purity glass thimbles. The concentrations of galangin (16.37 ± 0.61 mg/g), and chrysin (7.66 ± 0.64 mg/g) were maximal at 200 °C for 20 min, and 170 °C for 20 min, respectively. The antioxidative properties from propolis increased with the increasing extraction temperature and extraction time on SWE. The maximum yields of the total phenolics (226.37 ± 4.37 mg/g), flavonoids (70.28 ± 1.33 mg/g), and antioxidant activities (88.73 ± 0.58%, 98.86 ± 0.69%, and 858.89 ± 11.48 mg/g) were obtained at 200 °C for 20 min. Compared with using ethanol extraction (at 25 °C for 24 h, total phenolics = 176.28 ± 0.35, flavonoids = 56.41 ± 0.65, antioxidant activities = 72.74 ± 0.41%, 95.18 ± 0.11%, 619.51 ± 8.17 mg/g), all yields of SWE extracts obtained at 200 °C for 20 min were higher. SWE is suitable for a much faster and more efficient method extracting bioactive compounds from propolis compared to traditional extraction method.

Thermal conversion kinetics and solubility of soy isoflavones in subcritical water extraction

The conversion of isoflavones during subcritical water extraction were studied using first-order reaction kinetics modeling. Isoflavones were extracted from soybean using temperatures from 100℃ to 180℃ for 3 to 30 min. It was found that malonylgenistin was the most thermally unstable, with little being detected above 100℃. The optimal extraction temperatures for acetylgenistin (AG), genistin (G), and genistein (GE) were 120℃, 150℃, and 180℃, respectively. A larger sum of the numbers of both hydroxyl groups and oxygen molecules was associated with a lower melting point and optimal extraction temperature. Kinetics modeling of reaction rate constant k and activation energy E_a showed that all of the reaction rates tended to increase with temperature, with the relationship fitted well by a first-order model in nonlinear regression. For temperatures between 100℃ and 150℃, AG → G and AG → GE conversions showed the highest rate constants, but G → GE and G → D₃ (degraded G) conversions became dominant at 180℃. Chemical compounds studied in this article: genistein (PubChem CID: 5280961), genistin (PubChem CID: 5281377), 6″-O-malonylgenistin (PubChem CID: 15934091), 6″-O-acetylgenistin (PubChem CID: 5315831).

Bioactives from Crude Rice Bran Oils Extracted Using Green Technology

Crude rice bran oils from different rice cultivars and extraction methods bear different contents of nutraceuticals. The health benefits of lowering cholesterol activity of rice bran oil being confirmed by many reports are partly attributed to non-nutrient nutraceuticals, especially γ-oryzanol, phytosterols, and policosanols. As the world has been facing the global warming crisis, green extraction technology is gaining attention from many sectors. The current study aims to compare the nutraceutical composition with respect to γ-oryzanol, phytosterol, and policosanol content as well as the antioxidant properties of crude rice bran oils extracted from white and red rice bran using three green technologies, comparing with conventional hexane extraction. The data show that the traditional solvent extraction gave the highest oil yield percentage (26%), but it was not significantly different from subcritical liquefied dimethyl ether extraction (24.6%). Subcritical liquefied dimethyl ether extraction gave higher oil yield than supercritical CO2 extraction (15.5–16.2%). The crude rice bran oil extracted using subcritical liquefied dimethyl ether extraction produced the highest total phenolic contents and antioxidant activities. The highest γ-oryzanol content of the crude rice bran oil was found in oil extracted by conventional cold press (1370.43 mg/100 g). The γ-oryzanol content of the oil obtained via subcritical liquefied dimethyl ether extraction was high (1213.64 mg/100 g) compared with supercritical CO2 extraction. The red rice bran yielded the crude rice bran oil with the highest total phytosterol content compared with the white bran, and the oil from red rice bran extracted with subcritical liquefied dimethyl ether generated the highest total phytosterol content (1784.17 mg/100 g). The highest policosanol content (274.40 mg/100 g) was also found in oil obtained via subcritical liquefied dimethyl ether extraction.

Polysaccharide from Hemerocallis citrina Borani by subcritical water with different temperatures and investigation of its physicochemical properties and antioxidant activity

Hemerocallis citrina Borani as a low-cost vegetable, has various health benefits. However, the industry of H. citrina Borani is in the state of primary processing, with poor economic benefits. This study aimed to investigate the physicochemical properties, and the antioxidant activity of H. citrina Borani polysaccharide (HCBP) using subcritical water extraction (SWE) at different temperatures, to expand the value of H. citrina Borani. HCBP mainly composed of nine monosaccharides (glucose, galactose, rhamnose, fucose, mannose, arabinose, xylose, galacturonic acid, and glucuronic acid), among which the content of neutral sugar was higher and uronic acid was lower. HCBP contained glycosidic bond of β-configurations and trace quantities protein. The molecular weight of HCBP decreased with increasing temperature. Shear thinning occurred in HCBP with the increase of shear rate (0.01-1 s-1), and the apparent viscosity of HCBP decreased at higher temperature (150-160°C) with the increase continuously of shear rate (1-10 s-1), but almost remained constant at lower temperature (130-140°C). Scanning electron microscope showed that HCBP had rough surface, loose structure, obvious particle gap, and irregular shape. In addition, HCBP extracted at 160°C had strong FRAP activity, and HCBP extracted at 130 and 140°C had better ABTS radical scavenging activity. This study suggests that HCBP extracted by SWE could provide a cheap raw material as food thickening agent and natural antioxidants.

Polysaccharide from Hemerocallis citrina Borani by subcritical water: Bioactivity, purification, characterization, and anti-diabetic effects in T2DM rats

Hemerocallis citrina Borani (daylily) has various health benefits. However, the structural characterization and hypoglycemic effects of its polysaccharide remain unclear. Here, we first report for the first time, the effects of subcritical water extraction temperature on bioactivity of Hemerocallis citrina Borani polysaccharide (HCBP). HCBP extracted at 160 °C had better scavenging ability of free-radical and pancreatic lipase inhibition. This study aimed to investigate the structural characterization and anti-diabetic effects of aforementioned HCBP. HCBP was separated into three fractions using a DEAE-Sepharose Fast Flow. HCBP-1 was the major component with lower molecular weight, HCBP-2 was the least abundant component, HCBP-3 was the component with higher uronic acid and molecular weight. HCBP treatment significantly decreased the concentrations of fasting blood glucose, insulin, total cholesterol, triglyceride, and low density lipoprotein, as well as improved glucose intolerance and insulin resistance in type 2 diabetes mellitus (T2DM) rats. HCBP also protected the kidneys and pancreatic organs by histopathology and immunohistochemical analyses in T2DM rats. In addition, HCBP significantly increased the antioxidant enzymes activities and decreased the level of malonaldehyde to alleviated the oxidative stress injury. The results indicate HCBP extracted by subcritical water is promising functional food ingredients and could be used in T2DM treatment.

Protein Hydrolysis by Subcritical Water: A New Perspective on Obtaining Bioactive Peptides

The importance of bioactive peptides lies in their diverse applications in the pharmaceutical and food industries. In addition, they have been projected as allies in the control and prevention of certain diseases due to their associated antioxidant, antihypertensive, or hypoglycemic activities, just to mention a few. Obtaining these peptides has been performed traditionally by fermentation processes or enzymatic hydrolysis. In recent years, the use of supercritical fluid technology, specifically subcritical water (SW), has been positioned as an efficient and sustainable alternative to obtain peptides from various protein sources. This review presents and discusses updated research reports on the use of subcritical water to obtain bioactive peptides, its hydrolysis mechanism, and the experimental designs used for the study of effects from factors involved in the hydrolysis process. The aim was to promote obtaining peptides by green technology and to clarify perspectives that still need to be explored in the use of subcritical water in protein hydrolysis.

Progress in the Valorization of Fruit and Vegetable Wastes: Active Packaging, Biocomposites, By-Products, and Innovative Technologies Used for Bioactive Compound Extraction

According to the Food Wastage Footprint and Climate Change Report, about 15% of all fruits and 25% of all vegetables are wasted at the base of the food production chain. The significant losses and wastes in the fresh and processing industries is becoming a serious environmental issue, mainly due to the microbial degradation impacts. There has been a recent surge in research and innovation related to food, packaging, and pharmaceutical applications to address these problems. The underutilized wastes (seed, skin, rind, and pomace) potentially present good sources of valuable bioactive compounds, including functional nutrients, amylopectin, phytochemicals, vitamins, enzymes, dietary fibers, and oils. Fruit and vegetable wastes (FVW) are rich in nutrients and extra nutritional compounds that contribute to the development of animal feed, bioactive ingredients, and ethanol production. In the development of active packaging films, pectin and other biopolymers are commonly used. In addition, the most recent research studies dealing with FVW have enhanced the physical, mechanical, antioxidant, and antimicrobial properties of packaging and biocomposite systems. Innovative technologies that can be used for sensitive bioactive compound extraction and fortification will be crucial in valorizing FVW completely; thus, this article aims to report the progress made in terms of the valorization of FVW and to emphasize the applications of FVW in active packaging and biocomposites, their by-products, and the innovative technologies (both thermal and non-thermal) that can be used for bioactive compounds extraction.

Pharmacological Activities for Morus alba L., Focusing on the Immunostimulatory Property from the Fruit Aqueous Extract

Depending on the extraction method, numerous compounds that have specific pharmacological effects can be obtained from M. alba L. There is a growing scientific interest in health problems related to aging. Efforts to develop safe immune-enhancing pharmaceuticals are increasing. This review aims to summarize and critically discuss the immunity enhancement effects and pharmaceutical efficacy of M. alba L. extracts. The scientific database search was conducted using Google Scholar, Web of Science, and PubMed until May 2021. Additional articles were identified and obtained from references in the retrieved articles. Ethanol or methanol extraction of various parts of M. alba L. identified a large amount of phenols and flavonoids, which are effective for immunosuppression, antioxidants, and cardiovascular diseases, and are antibacterial, and anticancer. Water extraction of M. alba L. enhanced the innate immune response based on immune cell activation. A polysaccharide and an alkaloid related to increased macrophage activity were isolated from M. alba L. fruit extracts. M. alba L. fruit water extracts primarily induced the production of pro-inflammatory substances, in model organisms, via TLR4 in immune cells. Water extracts have been shown to be effective in pathogen defense and tumor suppression by enhancing macrophage activity. Based on our literature review on the bioactivity of M. alba L. fruit extracts, particularly in relation to their immunity enhancement activity, we anticipate that M. alba-derived pharmaceuticals will have excellent potential in future medical research.

Anthocyanin Structure and pH Dependent Extraction Characteristics from Blueberries (Vaccinium corymbosum) and Chokeberries (Aronia melanocarpa) in Subcritical Water State

This study determines the optimal extraction conditions for the subcritical-water extraction (SWE) of anthocyanin from blueberries and chokeberries and compares the performance using conventional extraction methods. SWE is carried out under different conditions of extraction temperature (110 °C, 130 °C, 150 °C, 170 °C, 190 °C, and 200 °C), extraction time (1, 3, 5, and 10 min), and solvent pH (water and 1% citric acid). The solubility and stability of anthocyanin from blueberries and chokeberries influences the optimal condition for SWE. The presence of more methoxy and hydroxyl functional groups in the basic skeleton of anthocyanin will result in a lower solubility at a high temperature. Water at a higher temperature exhibits a better dissociation reaction, and a solvent has a lower pH at a higher temperature. One percent citric acid is used to reduce the pH of the solvent, which increases the extraction efficiency of anthocyanin in a subcritical water state.

Subcritical water extraction of bioactive compounds from Orostachys japonicus A. Berger (Crassulaceae)

Subcritical-water extraction is an ecofriendly method for extracting antioxidant compounds only using water. The Subcritical-water extraction was employed for the extraction of bioactive compounds from Orostachys japonicus known as rock pine by investigating the use of various temperatures (110–260 °C) and extraction times (5–20 min). The Subcritical-water extraction condition at 220 °C for 15 min; the total phenolics content (39.9 ± 4.1 mg/g), flavonoids content (11.4 ± 0.6 mg/g), and antioxidant activities (90.3 ± 2.2%, 96.0 ± 2.9%, and 662.4 ± 17.2 mg/g) of Subcritical-water extract were higher under this condition than for extraction with either methanol or ethanol. Triterpene saponins were observed only in subcritical-water extraction condition at 220 °C for 15 min. Further, some of its phenolic constituents; gallic acid, quercetin, and kaempferol were quantified by high performance liquid chromatography. Subcritical-water extraction is an effective method for extracting valuable bioactive compounds from Orostachys japonicus.

Green extraction of polyphenolic-polysaccharide conjugates from Pseuderanthemum palatiferum (Nees) Radlk.: Chemical profile and anticoagulant activity

In this study, pressurized liquid extraction (PLE) of polyphenolic-polysaccharide (PP) from Pseuderanthemum palatiferum (Nees) Radlk. leaves was carried out and compared with a conventional technique using 0.1 M sodium hydroxide. The extracts were purified according to the method reported previously to obtain PP conjugates which were further studied about chemical profiles and anticoagulant activity. Fourier-transform infrared spectroscopy (FTIR), UV-Vis, nuclear magnetic resonance (NMR), gel permeation chromatography (GPC), and spectrophotometry analysis were used to characterize the selected PP conjugates. The results showed that PP conjugates comprised of carbohydrate, phenolic, and protein constituents with the yield ranged from 2.76% to 14.34%. Seven mono sugars containing in all conjugates were determined using high-performance liquid chromatography (HPLC), namely, arabinose, fucose, galactose, glucose, mannose, rhamnose, and xylose. PP conjugates obtained from PLE at 150 °C (PP-PLE5) exhibited better anticoagulant activity than those found at 200 °C and comparable to that of the conventional technique. On gel permeation chromatography, PP-PLE5 showed a broad molecular mass from 6 to 642 kDa. From the obtained results, PLE can be used as a green effective technique for the recovery of PP conjugate from P. palatiferum leaves.

Glycerol as Alternative Co-Solvent for Water Extraction of Polyphenols from Carménère Pomace: Hot Pressurized Liquid Extraction and Computational Chemistry Calculations

Glycerol is a co-solvent for water extraction that has been shown to be highly effective for obtaining polyphenol extracts under atmospheric conditions. However, its efficacy under subcritical conditions has not yet been studied. We assessed different water-glycerol mixtures (15%, 32.5%, and 50%) in a hot pressurized liquid extraction system (HPLE: 10 MPa) at 90 °C, 120 °C, and 150 °C to obtain extracts of low molecular weight polyphenols from Carménère grape pomace. Under the same extraction conditions, glycerol as a co-solvent achieved significantly higher yields in polyphenols than ethanol. Optimal extraction conditions were 150 °C, with 32.5% glycerol for flavonols and 50% for flavanols, stilbenes, and phenolic acids. Considering gallic acid as a model molecule, computational chemistry calculations were applied to explain some unusual extraction outcomes. Furthermore, glycerol, methanol, ethanol, and ethylene glycol were studied to establish an incipient structure-property relationship. The high extraction yields of gallic acid obtained with water and glycerol solvent mixtures can be explained not only by the additional hydrogen bonds between glycerol and gallic acid as compared with the other alcohols, but also because the third hydroxyl group allows the formation of a three-centered hydrogen bond, which intensifies the strongest glycerol and gallic acid hydrogen bond. The above occurs both in neutral and deprotonated gallic acid. Consequently, glycerol confers to the extraction solvent a higher solvation energy of polyphenols than ethanol.

Extraction of Polysaccharide from Dendrobium nobile Lindl. by Subcritical Water Extraction

Subcritical water extraction (SWE) uses hot compressed water as an effective solvent for both polar and nonpolar compounds and has been developed as an environmentally benign extraction technology for natural materials. Polysaccharides as one of the main ingredients in Dendrobium plants showed obvious biological activity. Thus, SWE of polysaccharides obtained from Dendrobium nobile Lindl. was investigated in this work. The response surface methodology (RSM) was combined with a Box-Behnken design to evaluate the influence that the three independent variables had on the response. The optimal extraction conditions (determined via RSM) were 129.83 °C extraction temperature, 16.71 min extraction time, and 1.12 MPa extraction pressure. The maximum predicted polysaccharide yield was 20.67%, which corresponded well with the experiential extraction (21.88%). The polysaccharides obtained from either the stirring extraction, refluxing extraction, ultrasound extraction, or SWE methods were compared, and the extraction processes were modeled. The molecular weight, monosaccharide composition, and antioxidative activities of the polysaccharides were analyzed.

The Impact of Temperature and Ethanol Concentration on the Global Recovery of Specific Polyphenols in an Integrated HPLE/RP Process on Carménère Pomace Extracts

Sequential extraction and purification stages are required to obtain extracts rich in specific polyphenols. However, both separation processes are often optimized independently and the effect of the integrated process on the global recovery of polyphenols has not been fully elucidated yet. We assessed the impact of hot-pressurized liquid extraction (HPLE) conditions (temperature: 90-150 °C; ethanol concentration: 15%-50%) on the global recovery of specific phenolic acids, flavanols, flavonols and stilbenes from Carménère grape pomace in an integrated HPLE/resin purification (RP) process. HPLE of phenolic acids, flavanols and stilbenes were favored when temperature and ethanol concentration increased, except for chlorogenic acid which showed an increment of its Gibbs free energy of solvation at higher ethanol contents. Ethanol concentration significantly impacted the global yield of the integrated HPLE/RP process. The lower the ethanol content of the HPLE extracts, the higher the recovery of phenolic acids, flavanols and stilbenes after RP, except for flavonols which present more polar functional groups. The best specific recovery conditions were 150 °C and ethanol concentrations of 15%, 32.5% and 50% for phenolic acids, flavanols and stilbenes, and flavonols, respectively. At 150 °C and 32.5% of ethanol, the extracts presented the highest total polyphenol content and antioxidant capacity. The integrated HPLE/RP process allows a selective separation of specific polyphenols and eliminates the interfering compounds, ensuring the safety of the extracts at all evaluated conditions.

Extraction of Bioactive Compounds from Pseuderanthemum palatiferum (Nees) Radlk. Using Subcritical Water and Conventional Solvents: A Comparison Study

The present study investigated the recovery of antioxidative compounds obtained from Pseuderanthemum palatiferum (Nees) Radlk. and their biological activities using subcritical water in comparison with hot water, Soxhlet, and methanol extraction. In this study, high-performance liquid chromatography (HPLC) and three commonly used assays, that is, 2,2-diphenyl-1-picrylhydrazyl assays, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), and ferric reducing antioxidant power, were employed to measure the number of valuable compounds and their antioxidant capacities, respectively. Additionally, the antimicrobial ability of the various extracts against seven pathogenic bacteria strains was assessed. The results demonstrated that the extracts obtained from subcritical water extraction (SWE) contain the highest amount of saponin (33.82 ± 2.08 mg diosgenin/g), phenolic (34.87 ± 0.29 mg CE/g), and protein (104.66 ± 7.63 mg BSA/g), which are obtained at 170 °C, 190 °C, and 230 °C, respectively. The highest amounts of total sugar and flavonoids (211.73 ± 1.58 mg glucose/g and 20.71 ± 0.42 mg RE/g, respectively) were obtained at lower temperature (130 °C and 130 °C, respectively), and these values were higher than those obtained from hot water, Soxhlet, and methanol extraction. HPLC analysis indicated that the highest amount of apigenin (3.46 ± 0.03 mg/g) and kaempferol (2.43 ± 0.03 mg/g) were obtained by SWE at 170 °C and 190 °C, respectively. Furthermore, the extracts from SWE exhibited higher antimicrobial activity against five of the seven pathogenic bacterial strains tested compared with those obtained from conventional extraction methods. Therefore, subcritical water could be utilized as a cost-effective and green solvent to extract valuable compounds from P. palatiferum (Nees) Radlk. leaf. PRACTICAL APPLICATION: Subcritical water was able to recover more bioactive compounds from the sample, such as phenolics, flavonoids, saponin, protein, and polysaccharides, than conventional solvents. The mixture of polyphenolic-polysaccharide-protein conjugates could be used in further steps, isolation, and purification, and applied to functional food.

Conversion of 6-gingerol to 6-shogaol in ginger (Zingiber officinale) pulp and peel during subcritical water extraction

Subcritical water extraction is an eco-friendly method for the extraction of less polar compounds without the use of organic solvents. This study determined the extraction conditions that maximize the contents of 6-gingerol and 6-shogaol obtained from ginger pulp and peel. The highest yields of 6-gingerol (0.68 ± 0.08 mg/g), and 6-shogaol (0.39 ± 0.03 mg/g) were obtained from ginger pulp at the extraction conditions of 130 °C/25 min, and 190 °C/15 min. 6-Shogaol content increased with the increasing extraction temperature and extraction time due to the conversion of 6-gingerol to 6-shogaol by thermal cracking. The antioxidant activity of ginger extracts were increased depending on the increasing of 6-shogaol content.

Subcritical water extraction of phenolic and antioxidant constituents from pistachio (Pistacia vera L.) hulls

Pistachio hulls, important by-products of pistachio processing, were extracted using an environmentally friendly process with subcritical water (SCW) at a pressure of 6.9 MPa in the range of 110 and 190 °C, and a flow rate of 4 ml/min. Detailed HPLC-DAD-ESI/MSⁿ analyses allowed the identification of 49 phenolic compounds in the SCW extracts. Total gallotannin yields up to 33 g/kg were reached at 150-170 °C, where gallic acid (22.2 g/kg) and penta-O-galloyl-β-d-glucose (9.77 g/kg) levels were 13.2- and 10.6-fold higher than those in the aqueous methanol extracts. Flavonols were also effectively extracted at 110-150 °C (4.37-5.65 g/kg), while anacardic acid recovery was poor (1.13-2.77 g/kg). Accordingly, high amounts of anacardic acids (up to 50.7 g/kg) were retained in the extraction residue, revealing that SCW extraction allowed selective extraction of gallotannins and flavonols. Antioxidant capacities ranged from 0.68 to 1.20 mmol Trolox equivalents (TE)/g for SCW extracts increasing with temperature up 190 °C.

Integrated extraction and purification of soy isoflavones by using aqueous micellar systems

In this work, an integration of solid-liquid and liquid-liquid extractions by using aqueous micellar two-phase systems was evaluated as potential tool to purify soy isoflavones. Additionally, the proposed methodology aimed to preserve the protein content of the processed soy flour. The extractive assays were performed in AMTPS formed by Triton X-114 and sodium tartrate. In order to optimize the purification process, temperature and time were evaluated as independent variables. Under optimal working conditions, i.e. 100min and 33°C of incubation, IF were purified with a recovery percentage of 93 and a purification factor of almost 10. More importantly, the obtained sample presented an aglycone proportion superior to the reported by other methodologies. These results open perspectives to the use of aqueous micellar two-phase systems as an integrative methodology to extract, concentrate and purify isoflavones.

Characteristics of Subcritical Water Extraction and Kinetics of Pentacyclic Triterpenoids from Dry Loquat (Eriobotrya japonica) Leaves

In this study, pentacyclic triterpenoids (PTTs) were extracted from loquat leaves by subcritical water extraction (SWE) technique in a dynamic mode. The results revealed that PTTs yield increased up to 5.38±0.12 mg/g with the increasing temperature at 180 °C for corosolic acid (CA) and up to 7.20±0.11 mg/g at 200 °C for ursolic acid (UA) within experimental times. The optimum flow rates to obtain concentrated CA and UA extracts were found to be 33.33 and 41.67 mL/min, respectively. Furthermore, extraction temperatures strongly influenced the extraction rate as demonstrated by the rate constant of each temperature tested. Moreover, the kinetic rate constant decreased as the function of temperature indicating the yield of both CA and UA were significantly influenced by subcritical temperatures and extraction times.

Determination of 13 endocrine disrupting chemicals in sediments by gas chromatography-mass spectrometry using subcritical water extraction coupled with dispersed liquid-liquid microextraction and derivatization

In this study, a sample pretreatment method was developed for the determination of 13 endocrine disrupting chemicals (EDCs) in sediment samples based on the combination of subcritical water extraction (SWE) and dispersed liquid-liquid microextraction (DLLME). The subcritical water that provided by accelerated solvent extractor (ASE) was the sample solution (water) for the following DLLME and the soluble organic modifier that spiked in the subcritical water was also used as the disperser solvent for DLLME in succession. Thus, several important parameters that affected both SWE and DLLME were investigated, such as the extraction solvent for DLLME (chlorobenzene), extraction time for DLLME (30s), selection of organic modifier for SWE (acetone), volume of organic modifier (10%) and extraction temperature for SWE (150 °C). In addition, good chromatographic behavior was achieved for GC-MS after derivatisation by using N,O-bis(trimethylsilyl) trifluoroacetamide (BSTFA). As a result, proposed method sensitive and reliable with the limits of detection (LODs) ranging from 0.006 ng g(-1) (BPA) to 0.639 ng g(-1) (19-norethisterone) and the relative standard deviations (RSDs) between 1.5% (E2) and 15.0% (DES). Moreover, the proposed method was compared with direct ASE extraction that reported previously, and the results showed that SWE-DLLME was more promising with recoveries ranging from 42.3% (dienestrol) to 131.3% (4,5α-dihydrotestosterone), except for diethylstilbestrol (15.0%) and nonylphenols (29.8%). The proposed method was then successfully applied to determine 13 EDCs sediment of Humen outlet of the Pearl River, 12 of target compounds could be detected, and 10 could be quantitative analysis with the total concentration being 39.6 ng g(-1), and which indicated that the sediment of Humen outlet was heavily contaminated by EDCs.