Synthesis and characterization of core-shell magnetic molecularly imprinted polymers for solid-phase extraction and determination of Rhodamine B in food

Selective extraction and quantitative analysis of pyrroloquinoline quinone from food

Pyrroloquinoline quinone (PQQ) is a bioactive compound that has attracted significant attention due to its potential health benefits. In this study, we developed a new magnetic molecularly imprinted nanoparticle (MMIN) for the selective extraction and determination of PQQ from food samples. The MMIN was synthesized using a surface molecular imprinting technique with PQQ as the template molecule, Fe3O4 nanoparticles as the magnetic core, and methacrylic acid as the functional monomer. The MMIN exhibited high selectivity and affinity towards PQQ, allowing for efficient extraction and preconcentration of PQQ from complex food matrices. The extracted PQQ was then quantified using HPLC-DAD. The developed method showed good linearity (R2 = 0.9985) and low limits of detection (0.03 μg L-1). The accuracy and precision of the method were evaluated by analyzing spiked food samples, with average recoveries close to 89.8%. The MMIN also demonstrated good reusability, with negligible decrease in extraction efficiency after five cycles of use. Overall, the developed MMIN-based method provides a reliable and efficient approach for the analysis of PQQ in food samples.

Electrophoretically deposited sulfonated poly(styrene-co-divinylbenzene) on a screw for microextraction of cationic dyes from aqueous solutions

In the present work, a novel solid-phase microextraction on a screw (MES) was employed to extract cationic dyes (malachite green, methylene blue, and rhodamine B) from food samples and fish breeding pool water. The sulfonated poly(styrene-co-divinylbenzene) was electrophoretically deposited on the surface of the grooves of a screw. Then the screw was placed inside a silicon tube as a holder to create a channel to run a test solution through it. The extracted dyes on the coated screw were eluted by a suitable eluent. High-performance liquid chromatography with an ultraviolet/visible detector was utilized for the separation and analysis of the analytes. The effective parameters of the analyte extraction efficiency were optimized. Under optimum conditions, the limits of detection were 0.15 μg/L, and calibration curves were linear in the range of 0.50-250.00 μg/L, with coefficients of determination > 0.989 for all studied dyes. The relative standard deviations of intra and inter-day (n = 3) were in the range of 2.8%-7.0% and 7.0%-9.5%, respectively. The MES was applied as a simple and repeatable method with acceptable relative recoveries (82.0%-103.0%) for the determination of cationic dyes in grape nectar, ice pop, jelly powder, and fish breeding pool water.

Facile and selective separation of anthraquinones by alizarin-modified iron oxide magnetic nanoparticles

Anthraquinones are widely distributed in higher plants and possess broad biological activities. The conventional separation procedures for isolating anthraquinones from the plant crude extracts require multiple extraction, concentration, and column chromatography steps. In this study, we synthesized three alizarin (AZ)-modified Fe₃O₄ nanoparticles (Fe₃O₄@AZ, Fe₃O₄@SiO₂-AZ, and Fe₃O₄@SiO₂-PEI-AZ) by thermal solubilization method. Fe₃O₄@SiO₂-PEI-AZ showed strong magnetic responsiveness, high methanol/water dispersion, good recyclability, and high loading capacity for anthraquinones. To evaluate the feasibility of using Fe₃O₄@SiO₂-PEI-AZ for separating various aromatic compounds, we employed molecular dynamics simulations to predict the adsorption/desorption effects of PEI-AZ for various aromatic compounds in different methanol concentrations. The results showed that the anthraquinones could be efficiently separated from the monocyclic and bicyclic aromatic compounds by adjusting the methanol/water ratio. The Fe₃O₄@SiO₂-PEI-AZ nanoparticles were then used to separate the anthraquinones from the rhubarb extract. At 5% methanol, all the anthraquinones were adsorbed by the nanoparticles, thus allowing their separation from other components in the crude extract. Compared with the conventional separation methods, this adsorption method has the advantages of high adsorption specificity, simple operation, and solvent saving. This method sheds light on the future application of functionalized Fe₃O₄ magnetic nanoparticles to selectively separate desired components from complex plant and microbial crude extracts.

Magnetic Molecularly Imprinted Polymers for the Separation and Enrichment of Cannabidiol from Hemp Leaf Samples

Cannabidiol (CBD) has attracted immense attention due to its excellent clinical effects in the treatment of various diseases. However, rapid and accurate extraction of CBD from hemp plant concentrates remains a challenge. Thus, novel magnetic molecularly imprinted polymers (CBD-MMIPs) with specific recognizing capability for CBD were synthesized using ethylene glycol dimethacrylate as the cross-linker, CBD as the template, methacrylic acid as the functional monomer, azobisisobutyronitrile as the initiator, and Fe₃O₄ nanoparticles modified with SiO₂ as the magnetic carrier. The morphological, magnetic, and adsorption properties of obtained CBD-MMIPs were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, surface area and porosity analyses, and various adsorption experiments. The results showed that the CBD-MMIPs had selective specificity and high adsorption capacity for CBD. The adsorption of CBD by CBD-MMIPs could reach equilibrium in a short time (30 min), and the maximum adsorption capacity was as high as 26.51 mg/g. The specific recognition and selectivity properties of CBD-MMIPs to CBD were significantly higher than that of other structural analogues, and the regeneration tests established that the CBD-MMIPs had good recyclability. Furthermore, the CBD-MMIPs could be successfully used as an adsorbent to the extraction of CBD from hemp leaf sample concentrates with high recovery efficiencies (93.46-97.40%).

A review on recent advances in the applications of composite Fe3O4 magnetic nanoparticles in the food industry

Fe3O4 magnetic nanoparticles (MNPs) have attracted tremendous attention due to their superparamagnetic properties, large specific surface area, high biocompatibility, non-toxicity, large-scale production, and recyclability. More importantly, numerous hydroxyl groups (-OH) on the surface of Fe3O4 MNPs can provide coupling sites for various modifiers, forming versatile nanocomposites for applications in the energy, biomedicine, and environmental fields. With the development of science and technology, the potential of nanotechnology in the food industry has also gradually become prominent. However, the application of composite Fe3O4 MNPs in the food industry has not been systematically summarized. Herein, this article reviews composite Fe3O4 MNPs, including their properties, modifications, and physical functions, as well as their applications in the entire food industry from production to processing, storage, and detection. This review lays a solid foundation for promoting food innovation and improving food quality and safety.

Dual-Template Magnetic Molecularly Imprinted Polymer for Simultaneous Determination of Spot Urine Metanephrines and 3-Methoxytyramine for the Diagnosis of Pheochromocytomas and Paragangliomas

A novel dual-template magnetic molecularly imprinted polymer (MMIP) was synthesized to extract normetanephrine (NMN), metanephrine (MN) and 3-methoxytyramine (3-MT) from spot urine samples. As the adsorbent of dispersive solid-phase extraction (d-SPE), the MMIP was prepared using dopamine and MN as dual templates, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the crosslinking reagent and magnetic nanoparticles as the magnetic core. NMN, MN, 3-MT and creatinine (Cr) in spot urine samples were selectively enriched by d-SPE and detected by HPLC-fluorescence detection/ultraviolet detection. The peak area (A) ratios of NMN, MN and 3-MT to Cr were used for the diagnosis of pheochromocytomas and paragangliomas (PPGLs). The results showed that the adsorption efficiencies of MMIP for target analytes were all higher than 89.0%, and the coefficient variation precisions of intra-assay and inter-assay for the analytes were within 4.9% and 6.3%, respectively. The recoveries of the analytes were from 93.2% to 112.8%. The MMIP was still functional within 14 days and could be reused at least seven times. The d-SPE and recommended solid-phase extraction (SPE) were both used to pretreat spot urine samples from 18 PPGLs patients and 22 healthy controls. The correlation coefficients of A_NMN/A_Cr and A_MN/A_Cr between d-SPE and SPE were both higher than 0.95. In addition, the areas under the receiver operator curves for spot urine A_NMN/A_Cr, A_MN/A_Cr and plasma free NMN and MN were 0.975, 0.773 and 0.990, 0.821, respectively, indicating the two methods had the similar performances. The d-SPE method took only 20 min, which was effective in clinical application.

A designed miniature sensor for the trace level detection and degradation studies of the toxic dye Rhodamine B

The presence of organic pollutants in water and food samples is a risk for the environment. To avoid this hazard a variety of analytical tools are used for the detection of toxic organic contaminants. Herein we present a selective and sensitive electrochemical sensor based on amino group functionalized multi walled carbon nanotubes and carboxylic group functionalized multi walled carbon nanotubes (HOOC-fMWCNTs/NH2-fMWCNTs) as modifiers of the glassy carbon electrode for the detection of a toxic dye, Rhodamine B. The sensing ability of the designed sensor was examined by electrochemical impedance spectroscopy, cyclic voltammetry and square wave voltammetry. The synergistic effect of HOOC-fMWCNTs and NH2-fMWCNTs (layer by layer) led to enhanced electrocatalytic activity of the modified electrode surface for Rhodamine B detection. Under optimized conditions, the graph between concentration and peak current followed a linear trend in the concentration range of 0.1 nM to 0.05 μM. The limits of detection and quantification were found to be 57.4 pM and 191.3 pM respectively. The designed sensor was also used for probing the degradation of Rhodamine B. Sodium borohydride was found to degrade Rhodamine B in neutral media under ambient conditions. The kinetics of degradation followed first order kinetics. Rhodamine B degraded to the extent of more than 80% as revealed by electrochemical and spectrophotometric techniques. The developed method is promising for the treatment of dye contaminated wastewater. Moreover, it uses only a microliter volume of the sample for analysis.

Design, Preparation, and Application of Magnetic Nanoparticles for Food Safety Analysis: A Review of Recent Advances

This review (with 126 references) aims at providing an updated overview of the recent developments and innovations of the preparation and application of magnetic nanoparticles for food safety analysis. During the past two decades, various magnetic nanoparticles with different sizes, shapes, and surface modifications have been designed, synthesized, and characterized with the prospering development of material science. Analytical scientists and food scientists are among the ones who bring these novel materials from laboratories to commercial applications. Powerful and versatile surface functional groups and high surface to mass ratios make these magnetic nanoparticles useful tools for high-efficiency capture and preconcentration of certain molecules, even when they exist in trace levels or complicated food matrices. This is why more and more methods for sensitive detection and quantification of hazards in foods are developed based on these magic magnetic tools. In this review, the principles and superiorities of using magnetic nanoparticles for food pollutant analysis are first introduced, like the mechanism of magnetic solid phase extraction, a most commonly used method for food safety-related sample pretreatment. Their design and preparation are presented afterward, alongside the mechanisms underlying their application for different analytical purposes. After that, recently developed magnetic nanoparticle-based methods for dealing with food pollutants such as organic pollutants, heavy metals, and pathogens in different food matrices are summarized in detail. In the end, some humble outlooks on future directions for work in this field are provided.

Facile preparation of core-shell magnetic organic covalent framework via self-polymerization of two-in-one strategy as a magnetic solid-phase extraction adsorbent for determination of Rhodamine B in food samples

The monomer of two-in-one molecular design strategy (i.e., A₂B₂ type monomer) 1,6-bis(4-formylphenyl)-3,8-bis((4-aminophenyl) ethynyl)) pyrene (BFBAEPy) was self-polymerized and coated on the modified Fe₃O₄ surface to synthesize a magnetic covalent organic framework (Fe₃O₄@COF) nanocomposite with a core-shell structure. Before high-performance liquid chromatography with ultraviolet detection (HPLC-UV) determination, Fe₃O₄@COF was used as a magnetic solid-phase extraction (MSPE) adsorbent to enrich Rhodamine B (RhB) illegally added to Chili powder and Chinese prickly ash. It had a large specific surface area and suitable pore size, which promoted the efficient adsorption of RhB dye and eliminated the interference of the matrix. Several key parameters affecting the extraction recovery rate were investigated, including adsorption capacity, adsorption time, pH, ionic strength, elution solvent, elution volume and elution time. Under the best optimized conditions, within the linear detection range of 0.05-5 µg/mL for RhB with the limit of detection (LOD) was 0.0038 µg/mL, excellent linearity (correlation coefficient R²=0.9997), and good repeatability (relative standard deviations RSD%< 3.8%), satisfactory extraction recovery rate (91.7%-97.5%). Therefore, the application of the established method to the detection of RhB in food samples has bright prospects.

Recent application of molecular imprinting technique in food safety

Due to the extensive use of chemical substances such as pesticides, antibiotics and food additives, food safety issues have gradually attracted people's attention. The extensive use of these chemicals seriously damages human health. In order to detect trace chemical residues in food, researchers have to find several simple, economical and effective tools for qualitative and quantitative analysis. As a kind of material that specifically and selectively recognize template molecules from real samples, molecular imprinting technique (MIT) has widely applied in food samples analysis. This article mainly reviews the application of molecularly imprinted polymer (MIP) in the detection of chemical residues from food in the past five years. Some recent and novel methods for fabrication of MIP are reviewed. Their application of sample pretreatment, sensors, etc. in food analysis is reviewed. The application of molecular imprinting in chromatographic stationary phase is referred. Additionally, the challenges faced by MIP are discussed.

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

Surface Polymers on Multiwalled Carbon Nanotubes for Selective Extraction and Electrochemical Determination of Rhodamine B in Food Samples

In this study, we combine magnetic solid phase extraction (MSPE), with the screen-printed carbon electrode (SPCE) modified by a molecular imprinted polymer (MIP) for sensitive and selective extraction and electrochemical determination of Rhodamine B in food samples. A magnetic solid phase extraction (MSPE) was carried out using magnetic poly(styrene-co-divinylbenzene) (PS-DVB) and magnetic nanoparticles (MNPs) synthetized on the surface of multiwalled carbon nanotubes (MWCNTs). An MIP was prepared on the surface of MWCNTs in the presence of titanium oxide nanoparticles (TiO₂NPs) modifying the SPCE for the rapid electrochemical detection of Rhodamine B. The MIPs synthesis was optimized by varying the activated titanium oxide (TiO₂) and multiwalled carbon nanotubes (MWCNTs) amounts. The MSPE and electrochemical detection conditions were optimized as well. The present method exhibited good selectivity, high sensitivity, and good reproducibility towards the determination of Rhodamine B, making it a suitable method for the determination of Rhodamine B in food samples.

Ultrasound-assisted solid phase microextraction-HPLC method based on Fe3O4@SiO2-NH2-molecularly imprinted polymer magnetic nano-sorbent for rapid and efficient extraction of harmaline from Peganum harmala extract

In the present study, a magnetic molecularly imprinted polymer (MMIP) was synthesized for the extraction of harmaline from Peganum harmala by dispersive solid-phase microextraction (DSPME). The MMIP for selective and intelligent extraction of harmaline with excellent functionality and high selectivity was synthesized using the sol-gel method with functionalized superparamagnetic core-shell nanoparticles, ethylene glycol dimethacrylate (EDMA) as a cross-linker, methacrylic acid (MAA) as a functional monomer, and 2,2-azobisisobutyronitrile (AIBN) as a porogen. To study the properties and morphology of the coated polymer, FT-IR spectroscopy, FESEM, TEM images, and VSM were used. The DSPME-HPLC-UV equipment was used to quantify and analyze the data obtained from harmaline extraction. In this research, the efficiency of the synthesized polymer in harmaline extraction was modeled and optimized using the response surface methodology based on central composite design (RSM-CCD). In addition, for modeling the isotherm of harmaline sorption by the MMIP, Langmuir and Freundlich isotherm equations were used. The obtained results showed that the extraction of harmaline with the MMIP was well described with Freundlich isotherm. The results of the validation of the method showed that the measurement of harmaline in the concentration range of 1.0-4000 ng mL^-1 followed a linear relationship (R² = 9986.0). Moreover, the accuracy or repeatability index (% RSD) was determined to be < 10, and the LOQ and LOD values were 0.526 and 0.158 ng mL^-1, respectively. The results of this study showed that the DSPME technique by using the synthesized MMIP as an effective sorbent with high efficiency and capacity could be utilized for pre-concentration and extraction of harmaline from real and complex samples.

On-line separation/analysis of Rhodamine B dye based on a solid-phase extraction high performance liquid chromatography self-designed device

A special self-designed device based on poly-1-vinyl-3-pentylimidazole hexafluorophosphate (PILs-C5) solid-phase extraction and high performance liquid chromatography (HPLC) is proposed as a novel method for the on-line separation and analysis of Rhodamine B (RhB) dye. Single factor experiment design and orthogonal experiment design were used to optimize the experimental parameters, such as pH, the amount of PILs-C5, sample volume, flow rate, eluent type, eluent concentration, eluent volume, and the flow rate of eluent. Under the optimized conditions, the linear range was 0.02-2.4 μg mL-1, with the correlation coefficients (R 2) of 0.997. The limit of detection (LOD) and limit of quantification (LOQ) were 0.004 μg mL-1 and 0.02 μg mL-1, respectively. The extraction capacity was 6.22 mg g-1, and enrichment ratio was 15. The extraction mechanism and the post-treatment method of PILs-C5 were also studied. This method was applied to analyze RhB in a wide variety of real samples with satisfactory results.

Orderly Porous Covalent Organic Frameworks-based Materials: Superior Adsorbents for Pollutants Removal from Aqueous Solutions

Covalent organic frameworks (COFs) are a new type of crystalline porous polymers known for chemical stability, excellent structural regularity, robust framework, and inherent porosity, making them promising materials for capturing various types of pollutants from aqueous solutions. This review thoroughly presents the recent progress and advances of COFs and COF-based materials as superior adsorbents for the efficient removal of toxic heavy metal ions, radionuclides, and organic pollutants. Information about the interaction mechanisms between various pollutants and COF-based materials are summarized from the macroscopic and microscopic standpoints, including batch experiments, theoretical calculations, and advanced spectroscopy analysis. The adsorption properties of various COF-based materials are assessed and compared with other widely used adsorbents. Several commonly used strategies to enhance COF-based materials’ adsorption performance and the relationship between structural property and sorption ability are also discussed. Finally, a summary and perspective on the opportunities and challenges of COFs and COF-based materials are proposed to provide some inspiring information on designing and fabricating COFs and COF-based materials for environmental pollution management.

•

Covalent organic frameworks (COFs) are a new type of crystalline porous materials known for chemical stability, high specific surface area, and orderly porous channels.With the rapid growth of industrialization, water pollutants remain a serious issue of public health and environmental protection

•

COFs as superior adsorbents for the efficient removal of toxic heavy metal ions, radionuclides, and organic pollutants in water is becoming a hot topic

•

Information about the interaction mechanisms between various pollutants and COFs materials are summarized.The perspectives and challenges are proposed to provide some useful inspiration for the application of COFs in environmental pollution management

Advances in Molecularly Imprinted Systems: Materials, Characterization Methods and Analytical Applications

Introduction:

A molecular imprinting is one of the fascinating modification methods that employ molecules as targets to create geometric cavities for recognition of targets in the polymeric matrix. This method provides a broad versatility to imprint target molecules with different size, three-dimensional structure and physicochemical features. In contrast to the complex and timeconsuming laboratory surface modification procedures, this method offers a rapid, sensitive, inexpensive, easy-to-use, and selective approach for the diagnosis, screening and monitoring disorders. Owing to their unique features such as high selectivity, physical and chemical robustness, high stability, low-cost and reusability of this method, molecularly imprinted polymers have become very attractive materials and been applied in various applications from separation to detection.

Background:

The aims of this review are structured according to the fundamentals of molecularly imprinted polymers involving essential elements, preparation procedures and also the analytical applications platforms. Finally, the future perspectives to increase the development of molecularly imprinted platforms.

Methods:

A molecular imprinting is one of the commonly used modification methods that apply target as a recognition element itself and provide a wide range of versatility to replica other targets with a different structure, size, and physicochemical features. A rapid, easy, cheap and specific recognition approach has become one of the investigation areas on, especially biochemistry, biomedicine and biotechnology. In recent years, several technologies of molecular imprinting method have gained prompt development according to continuous use and improvement of traditional polymerization techniques.

Results:

The molecularly imprinted polymers with excellent performances have been prepared and also more exciting and universal applications have been recognized. In contrast to the conventional methods, the imprinted systems have superior advantages including high stability, relative ease and low cost of preparation, resistance to elevated temperature, and pressure and potential application to various target molecules. In view of these considerations, molecularly imprinted systems have found application in various fields of analytical chemistry including separation, purification, detection and spectrophotometric systems.

Conclusion:

Recent analytical methods are reported to develop the binding kinetics of imprinted systems by using the development of other technologies. The combined platforms are among the most encouraging systems to detect and recognize several molecules. The diversity of molecular imprinting methods was overviewed for different analytical application platforms. There is still a requirement of more knowledge on the molecular features of these polymers. A next step would further be the optimization of different systems with more homogeneous and easily reachable recognition sites to reduce the laborious in the accessibility in the three-dimensional polymeric materials in sufficient recognition features and also better selectivity and sensitivity for a wide range of molecules.

Three-dimensional nickel foam electrode for efficient electro-Fenton in a novel reactor

One of the bottlenecks often encountered in electro-Fenton technology is its low ability to produce hydrogen peroxide (H₂O₂). Thus, the hunt of suitable electrodes and reactor are a must to be tackled in order to improve the efficiency of the system. In this study, three-dimensional nickel foam was selected as cathode for in situ generating H₂O₂ efficiently and graphite was the control group in an enhanced oxygen mass transfer reactor. The micro-structure and electrochemical performance of electrodes were tested by scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV), electro-chemical impedance spectroscopy (EIS) and Tafel polarization techniques, respectively. The concentration of H₂O₂ produced by nickel foam cathode was 780.63 μmol/L and the removal efficiency of rhodamine B (RhB) was reached to 92.5% in 60 min. SEM and Tafel results showed that both nickel foam and graphite electrodes were porous structure cathodes. Moreover, CV and EIS experimental results indicated nickel foam electrode was controlled by charge transfer process while had a better transfer than graphite electrode. Electron spin resonance (ESR) spectra results demonstrated that the main oxidant species involved was ·OH, accounting for RhB degradation in electro-Fenton progress. Therefore, in terms of pollutant degradation in the electro-Fenton process, nickel foam electrode together with novel reactor was a promising technique.

A pro-gastrin-releasing peptide imprinted photoelectrochemical sensor based on the in situ growth of gold nanoparticles on a MoS2 nanosheet surface

Molecularly imprinted PEC platform for Pro-GRP sensing was prepared using lamellar MoS₂ nanosheets assembled with gold nanoparticles as photoactive elements. The molecularly imprinted PEC sensor shows excellent sensing performances towards Pro-GRP.

Core-Shell Molecularly Imprinted Polymer Nanocomposites for Biomedical and Environmental Applications

Core-shell polymers represent a class of composite particles comprising of minimum two dissimilar constituents, one at the center known as a core which is occupied by the other called shell. Core-shell molecularly imprinting polymers (CSMIPs) are composites prepared via printing a template molecule (analyte) in the coreshell assembly followed by their elimination to provide the everlasting cavities specific to the template molecules. Various other types of CSMIPs with a partial shell, hollow-core and empty-shell are also prepared. Numerous methods have been reported for synthesizing the CSMIPs. CSMIPs composites could develop the ability to identify template molecules, increase the relative adsorption selectivity and offer higher adsorption capacity. Keen features are measured that permits these polymers to be utilized in numerous applications. It has been developed as a modern technique with the probability for an extensive range of uses in selective adsorption, biomedical fields, food processing, environmental applications, in utilizing the plant's extracts for further applications, and sensors. This review covers the approaches of developing the CSMIPs synthetic schemes, and their application with special emphasis on uses in the biomedical field, food care subjects, plant extracts analysis and in environmental studies.

An in-tube aptamer/gold nanoparticles coated capillary solid-phase microextraction for separation of adenosine in serum and urine samples

As an endogenous nucleoside, adenosine was significant for the diagnosis and treatment of some diseases, such as schizophrenia. However, due to the complicated matrix interference, it was difficult to monitor trace or ultra-trace adenosine directly in bio-samples. In this contribution, a novel in-tube SPME technique based on aptamer/Au nanoparticles coated open tubular fused-silica capillary was established to separate and enrich adenosine in bio-samples with high affinity. Therefore, a uniform and dense AuNPs layer was coated on the inner surface of the open tubular capillary, and then adenosine aptamer was immobilized on AuNPs with a high capacity of 2.44 μg per 27-cm capillary. As a result, the capillary shown high selectivity to adenosine with a selectivity factor of 14.4 when compared with the scrambled aptamer/AuNPs coated capillary. Also, the extraction amount of adenosine was 2.8-24.8 times higher than those of its structural analogs and contrast, such as guanosine, uridine, cytidine, thymidine, and toluic acid. After the optimization of extraction conditions, the aptamer/AuNPs coated in-tube SPME-HPLC method was developed for the adenosine assay with the linear range of 0.002-0.100 μg mL^-1 and the detection limit of 0.45 ng mL^-1. Subsequently, the approach was applied for trace adenosine monitoring in human serum and urine samples. It showed a strong performance of reducing matrix interference and improving sensitivity, and the spiking recoveries of 89.9-92.6% and 91.1-94.5% were achieved respectively.

Evaluation of Molecularly Imprinted Polymers for Point-of-Care Testing for Cardiovascular Disease

Molecular imprinting is a rapidly growing area of interest involving the synthesis of artificial recognition elements that enable the separation of analyte from a sample matrix and its determination. Traditionally, this approach can be successfully applied to small analyte (<1.5 kDa) separation/ extraction, but, more recently it is finding utility in biomimetic sensors. These sensors consist of a recognition element and a transducer similar to their biosensor counterparts, however, the fundamental distinction is that biomimetic sensors employ an artificial recognition element. Molecularly imprinted polymers (MIPs) employed as the recognition elements in biomimetic sensors contain binding sites complementary in shape and functionality to their target analyte. Despite the growing interest in molecularly imprinting techniques, the commercial adoption of this technology is yet to be widely realised for blood sample analysis. This review aims to assess the applicability of this technology for the point-of-care testing (POCT) of cardiovascular disease-related biomarkers. More specifically, molecular imprinting is critically evaluated with respect to the detection of cardiac biomarkers indicative of acute coronary syndrome (ACS), such as the cardiac troponins (cTns). The challenges associated with the synthesis of MIPs for protein detection are outlined, in addition to enhancement techniques that ultimately improve the analytical performance of biomimetic sensors. The mechanism of detection employed to convert the analyte concentration into a measurable signal in biomimetic sensors will be discussed. Furthermore, the analytical performance of these sensors will be compared with biosensors and their potential implementation within clinical settings will be considered. In addition, the most suitable application of these sensors for cardiovascular assessment will be presented.

Recent Advances and Perspectives of Molecularly Imprinted Polymer-Based Fluorescent Sensors in Food and Environment Analysis

Molecular imprinting technology (MIT), also known as molecular template technology, is a new technology involving material chemistry, polymer chemistry, biochemistry, and other multi-disciplinary approaches. This technology is used to realize the unique recognition ability of three-dimensional crosslinked polymers, called the molecularly imprinted polymers (MIPs). MIPs demonstrate a wide range of applicability, good plasticity, stability, and high selectivity, and their internal recognition sites can be selectively combined with template molecules to achieve selective recognition. A molecularly imprinted fluorescence sensor (MIFs) incorporates fluorescent materials (fluorescein or fluorescent nanoparticles) into a molecularly imprinted polymer synthesis system and transforms the binding sites between target molecules and molecularly imprinted materials into readable fluorescence signals. This sensor demonstrates the advantages of high sensitivity and selectivity of fluorescence detection. Molecularly imprinted materials demonstrate considerable research significance and broad application prospects. They are a research hotspot in the field of food and environment safety sensing analysis. In this study, the progress in the construction and application of MIFs was reviewed with emphasis on the preparation principle, detection methods, and molecular recognition mechanism. The applications of MIFs in food and environment safety detection in recent years were summarized, and the research trends and development prospects of MIFs were discussed.

Preparation of Molecularly Imprinted Magnetic Graphene Oxide-Gold Nanocomposite and Its Application to the Design of Electrochemical Sensor for Determination of Epinephrine

In this study, a new molecularly imprinted polymer (MIP) based nanocomposite was synthesized then used to determine epinephrine (EPN) by the use of an electrochemical sensor modified by it. Typical techniques for the synthesis of MIP have disadvantages, such as weak binding sites, low mass transfer and low selectivity. One of the ways to improve electrochemical properties is the use of graphene oxide (GR-Ox) and modification of its surface. For this purpose, GR-Ox was initially magnetized (MGR-Ox), then its surface was coated with a silica layer, and gold nanoparticles (AuNPs) were coated on its surface. Subsequently, copolymerization of methacrylic acid (MAA) and N,N'-methylene-bis-acrylamide (MBA) in the presence of EPN was performed on the MGO-AuNPs surface. Afterwards, a selective carbon paste electrode (CPE) with synthetic nanocomposite was fabricated to detect EPN. Under optimal conditions, a linear range from 10^-8 to 5.0 × 10^-7 M was obtained for the measurement of EPN in urine and blood with a detection limit of 5 × 10^-9 M (S/N = 3).

A simple solvent extraction and ultra-performance liquid chromatography-tandem mass spectrometric method for the identification and quantification of rhodamine B in commercial lip balm samples

Rhodamine B is a synthetic dye used in many industries including cosmetics. Long-term contact may results neurotoxicity, genotoxicity and cancer. In the present work, a simple solvent extraction followed by rapid, sensitive and selective ultra-performance liquid chromatography-tandem mass spectrometric method has been proposed for the identification and quantification of rhodamine B in lip balm samples for the first time to our knowledge. The best extraction was achieved using organic solvent n-hexane followed by sonication, centrifugation and evaporation. The chromatographic separation was attained in <1 min with Acquity™ BEH C₁₈ reversed phase column and a tandem mass spectrometer. The limit of detection (LOD), limit of quantification (LOQ), linearity, precisions and accuracy of the proposed method were determined. The LOD and LOQ were found to be 0.1 μg/kg and 0.4 μg/kg, respectively. The linearity (R²) was obtained (>0.999) when analyzing low to higher range of concentrations. The precisions with relative standard deviation (RSD%) values in terms of repeatability (<2%, n = 5) and reproducibility (<3%, n = 5) were achieved. The accuracy in terms of recovery was obtained between 93% and 98%. The optimized procedures have been applied for the identification and quantification of rhodamine B in commercial lip balm samples from various brands and origin, and the amounts were obtained from not detected to 70.44 μg/kg. The good quality conditions, negligible matrix influence and higher recovery values obtained throughout analysis have proved the suitability of the present method for the routine analysis of rhodamine B in lip balm samples. The achieved results could be used to approximate the application of rhodamine B from individuals either from Saudi Arabia or globally, and thus to improve the quality and safety of lip balm products.

Design of GO–Ag-functionalized Fe3O4@CS composite for magnetic adsorption of rhodamine B

In this study, a novel magnetic composite (Fe₃O₄@CS/GO/Ag) modified with chitosan (CS), graphene oxide (GO) and Ag nanoparticles (Ag NPs) was successfully prepared as an efficient adsorbent for detection of rhodamine B (RB) combined with a fluorescence technique. The properties of the magnetic composite were confirmed by field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and vibrating sample magnetometry. The components of Fe₃O₄@CS/GO/Ag endowed it with excellent extraction performance and convenient operation. The main parameters affecting extraction and desorption efficiency were all investigated systematically. Under the optimized experimental conditions, the proposed method showed linear ranges (0.2–6.0 μg L⁻¹) with R² = 0.9992. The limits of detection (LODs) and quantification (LOQs) were 0.05 and 0.2 μg L⁻¹ (n = 3), respectively. Fe₃O₄@CS/GO/Ag exhibited outstanding extraction efficiency for RB, compared with CS-coated Fe₃O₄ nanoparticles (Fe₃O₄@CS) and GO-modified Fe₃O₄@CS (Fe₃O₄@CS/GO). The applicability of the proposed method was investigated by analyzing four real samples (waste water, soft drink, shampoo, and red pencil) and the spiked recoveries ranged between 94% and 97% with RSD ranging from 3% to 6%, which showed that the proposed method had satisfactory practicability and operability.

A novel magnetic composite modified with chitosan, graphene oxide and Ag nanoparticles, was successfully prepared as an efficient adsorbent for detection of rhodamine B combining with fluorescence technique.

Adsorption-desorption of hydrophilic contaminants rhodamine B with/without Cd2+ on a coastal soil: implications for mariculture and seafood safety

An experimental study on adsorption and desorption behaviors of rhodamine B (RhB) with/without cadmium ion (Cd²⁺) on a coastal soil was carried out in the face of the scarce studies on its environmental behaviors, especially its combined pollution with metal ions. The implications on mariculture and seafood safety, rarely concerned either, were also analyzed for providing a new insight between azo dyes and them. It showed that the adsorption of RhB on the tested soil was affected by Cd²⁺ and could be better fitted by the Freundlich model and dominantly identified as chemical adsorption according to the threshold of ΔG⁰ (40 kJ/mol). There is a positive hysteresis on the desorption of RhB, which was generally strengthened with the increasing concentration of RhB but generally weakened in the presence of Cd²⁺. The azo dyes including RhB and heavy metals such as Cd, as the major class of typical pollutants in coastal environment, are closely related to the mariculture and seafood safety. In the consideration of three aspects including potential pollutants for the mariculture, potential risks for seafood safety, and potential relationships between dyes and mariculture and seafood safety, their implications were further clarified.

Advancements of molecularly imprinted polymers in the food safety field

Molecularly imprinted technology (MIT) has been widely employed to produce stable, robust and cheap molecularly imprinted polymer (MIP) materials that possess selective binding sites for recognition of target analytes in food, such as pesticides, veterinary drugs, mycotoxins, illegal drugs and so on. Because of high selectivity and specificity, MIPs have drawn great attention in the food safety field. In this review, the recent developments of MIPs in various applications for food safety, including sample preparation, chromatographic separation, sensing, immunoassay etc., have been summarized. We particularly discuss the advancements and limitations in these applications, as well as attempts carried out for their improvement.