Determination of enrofloxacin and ciprofloxacin in foods of animal origin by capillary electrophoresis with field amplified sample stacking–sweeping technique

Novel fluorescence strategy based on G-quadruplex structure-switching aptamer for enrofloxacin detection in food and environmental samples

Enrofloxacin (ENR) is widely used in the prevention and treatment of animal infectious diseases, so it is necessary to strengthen the residue detection of this drug in animal-derived food and water environments. In this work, for the first time, we engineered assembly a split ENR aptamer into the G-quadruplex (G4) region to form a new aptamer (G4-ENRA) that provides a more sensitive signal-reporting function while retaining target-specific recognition ability of the aptamer. This rational design effectively overcomes the issue of difficulty in identification probe development. Under the optimized conditions, a response range of 0.05-20 µM and limit of detection of 26.7 nM were obtained by directly detecting fluorescence signals, displaying a comparative advantage over the previously reported methods. Moreover, this method demonstrated satisfactory performance for the ENR detection in various real food and environmental samples, with the detection recoveries ranging from 95.87 % to 104.36 %, illustrating promising applicability prospects.

Harnessing Graphene-Modified Electrode Sensitivity for Enhanced Ciprofloxacin Detection

Increased evidence has documented a direct association between Ciprofloxacin (CFX) intake and significant disruption to the normal functions of connective tissues, leading to severe health conditions (such as tendonitis, tendon rupture and retinal detachment). Additionally, CFX is recognized as a potential emerging pollutant, as it seems to impact both animal and human food chains, resulting in severe health implications. Consequently, there is a compelling need for the precise, swift and selective detection of this fluoroquinolone-class antibiotic. Herein, we present a novel graphene-based electrochemical sensor designed for Ciprofloxacin (CFX) detection and discuss its practical utility. The graphene material was synthesized using a relatively straightforward and cost-effective approach involving the electrochemical exfoliation of graphite, through a pulsing current, in 0.05 M sodium sulphate (Na2SO4), 0.05 M boric acid (H3BO3) and 0.05 M sodium chloride (NaCl) solution. The resulting material underwent systematic characterization using scanning electron microscopy/energy dispersive X-ray analysis, X-ray powder diffraction and Raman spectroscopy. Subsequently, it was employed in the fabrication of modified glassy carbon surfaces (EGr/GC). Linear Sweep Voltammetry studies revealed that CFX experiences an irreversible oxidation process on the sensor surface at approximately 1.05 V. Under optimal conditions, the limit of quantification was found to be 0.33 × 10-8 M, with a corresponding limit of detection of 0.1 × 10-8 M. Additionally, the developed sensor's practical suitability was assessed using commercially available pharmaceutical products.

Ratiometric fluorescence sensing of hazardous ciprofloxacin based on aggregation induced emission enhancement of thiolate-protected gold nanoclusters induced by La3+ ion

In this research work, ultrasensitive and reliable ratiometric sensor was designed for assay of ciprofloxacin (CIPRO). The platform consists of thiolate-protected gold nanoclusters (GSH@AuNCs) with high fluorescence quantum yield and long-term stability. In the existence of lanthanum (La3+) ion, the GSH@AuNCs emission was sharply raised owing to the formation of La3+/GSH@AuNCs system accompanied with aggregation-induced emission enhancement (AIEE). Addition of CIPRO, a good La3+ ion coordinator, decreased the fluorescence emission of La3+/GSH@AuNCs system at 610 nm significantly as a result of disaggregation caused by the removal of La3+ ion from GSH@AuNCs surface. Furthermore, the blue emission of La3+-CIPRO coordination complex appears at 440 nm. Under optimized conditions, the fluorescence ratios (F440/F610) were linearly increased with increasing the CIPRO amount within the range of 0.003-200 µM with a limit of detection equal to 0.2 nM (S/N = 3). The as-fabricated La3+/GSH@AuNCs system possesses outstanding reliability and sensitivity for the detection of CIPRO. The system was effectively used to assay CIPRO in human urine and milk specimens with recoveries % of 97.6-102.3 % and 96.7-105.7 % for urine and milk samples, respectively and RSD % did not exceed 2.5 %, suggesting the accuracy of the method.

A molecularly imprinted polypyrrole electrochemiluminescence sensor based on a novel zinc-based metal-organic framework and chitosan for determination of enrofloxacin

Nowadays, bacterial resistance caused by the abuse of antibiotics has become a worldwide problem. In this work, a quinolone antibiotic, enrofloxacin (ENR), was rapidly monitored by combining a selective molecular imprinting polymer (MIP) with the electrochemiluminescence (ECL) method. Zn-PTC, a novel zinc-based metal-organic framework (MOF) that has a large specific surface area and ultra-high luminous efficiency, was used as the ECL luminophore. Chitosan (CHIT) was used to contact the specific surface area of molecularly imprinted polymer films and further improved the detection sensitivity. Subsequently, the molecularly imprinted polypyrrole was electropolymerized on the surface of the Zn-PTC and CHIT modified glassy carbon electrode (GCE). The specific sites that could target recombining ENR were shaped on the surface of MIP after extracting the ENR templates. The specific concentrations of ENR could be detected according to the difference in ECL intensity (ΔECL) between the eluting and rebinding of ENR. After optimization, a good linear response of ΔECL and a logarithm of specific ENR concentrations could be obtained in the range of 1.0 × 10-12-1.0 × 10-4 mol L-1, with a detection limit of 9.3 × 10-13 mol L-1 (S/N = 3). Notably, this study provided a rapid, convenient, and cheap method for the detection of ENR in actual samples.

Electrochemical Sensor Based on the Hierarchical Carbon Nanocomposite for Highly Sensitive Ciprofloxacin Determination

A new voltammetry method for the highly sensitive antibacterial drug ciprofloxacin (CIP) is presented using glassy carbon electrodes modified with hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo-GCE). The use of a modified glassy carbon electrode in the form of hierarchical electrospun carbon nanofibers with NiCo nanoparticles (eCNF/CNT/NiCo) led to an LOD value as low as 6.0 µmol L-1 with a measurement sensitivity of 3.33 µA µmol L-1. The described procedure was successfully applied for CIP determination in samples with complex matrices, such as urine or plasma, and also in pharmaceutical products and antibiotic discs with satisfactory recovery values ranging between 94-104%. The proposed electrode was characterised by great stability, with the possibility of use for about 4 weeks without any significant change in the CIP peak current. The repeatability of the CIP response on the eCNF/CNT/NiCo/GC is also very good; its value measured and expressed as RSD is equal to 2.4% for a CIP concentration of 0.025 µmol L-1 (for 7 consecutive CIP voltammogram registrations). The procedure for electrode preparation is quick and simple and does not involve the use of expensive apparatus.

Sensitive electrochemical detection of enrofloxacin in eggs based on carboxylated multi-walled carbon nanotubes-reduced graphene oxide nanocomposites: Molecularlyimprintedrecognition versus direct electrocatalytic oxidation

A sensitive electrochemical method for detecting enrofloxacin was proposed using carboxylated multi-walled carbon nanotubes-reduced graphene oxide (MWCNT-COOH-RGO) nanocomposites. The MWCNT-COOH-RGO nanocomposites were firstly electrodeposited on a bare electrode, followed by electropolymerization of molecularly imprinted polymers. Enrofloxacin was determined by the mechanisms of direct electrocatalytic oxidation and molecularly imprinted recognition, respectively. Under the optimized conditions, a response range of 5.0×10^-7 M to 5.5×10^-5 M and limit of detection (LOD) of 2.3×10^-7 M were obtained by direct electrocatalytic oxidation of enrofloxacin using chronoamperometry. By contrast, the response range of 1.0×10^-10 M to 5.0×10^-5 M and LOD of 2.5×10^-11 M were achieved by molecularly imprinted recognition of enrofloxacin using square-wave voltammetry. Moreover, the proposed method exhibited good repeatability, stability and selectivity, and could be used for enrofloxacin detection in egg samples with satisfactory results.

CdSSe Nano-Flowers for Ultrasensitive Raman Detection of Antibiotics

Surface-enhanced Raman scattering (SERS) technique is widely used for the highly sensitive detection of trace residues due to its unparalleled signal amplification ability and plays an important role in food safety, environmental monitoring, etc. Herein, CdSSe nano-flowers (CdSSe NFs) are synthesized via the chemical vapor deposition (CVD) method. CdSSe NFs thin film is used as a SERS substrate with an ultralow limit of detection (LOD, 10−14 M), high apparent enhancement factor (EF, 3.62 × 109), and excellent SERS stability (relative standard deviation, RSD = 3.05%) for probe molecules of Rh6G. Further, CdSSe NFs substrate is successfully applied in the sensitive, quantitative, and label-free analysis of ciprofloxacin (CIP) and enrofloxacin (ENR) antibiotics, which exhibit LODs of below 0.5 ppb. This excellent SERS platform may be widely utilized for sensitive life science and environmental sensing.

A highly sensitive lateral flow immunoassay for the rapid and on-site detection of enrofloxacin in milk

Enrofloxacin (ENR) is a veterinary antibiotic used to treat bacterial infections in livestock. It chiefly persists in foods and dairy products, which in turn pose severe risks to human health. Hence it is very important to detect the ENR in foods and dairy products to safeguard human health. Herein, we attempted to develop a single-step detection lateral flow immunochromatographic assay (LFIA) using gold nanoparticles (AuNPs) for the rapid and on-site detection of ENR in milk samples. An anti-enrofloxacin monoclonal antibody (ENR-Ab) was conjugated with AuNPs for the specific detection of ENR in milk samples. For sensitivity improvement, many optimization steps were conducted on LFIA test strips. The visual limit of detection (vLOD) was found to be 20 ng/ml with a cut-off value of 50 ng/ml in the milk samples. The obtained LOD and cut-off value were within the safety limit guidelines of the Ministry of food and drug safety, South Korea. The test strip showed negligible cross-reactivity with ENR analogs, and other components of antibiotics, this indicates the high specificity of the LFIA test strip towards ENR. The designed test strip showed good reliability. The visual test results can be seen within 10 min without the need for special equipment. Therefore, the test strip can be employed as a potential detection strategy for the qualitative on-site detection of enrofloxacin in milk samples.

A Direct Z-Scheme AgBr/CuBi2O4 Photocathode for Ultrasensitive Detection of Ciprofloxacin and Ofloxacin by Controlling the Release of Luminol in Self-Powered Microfluidic Photoelectrochemical Aptasensors

An innovative self-powered microfluidic photoelectrochemical (PEC) aptasensor was developed that uses photoactive AgBr/CuBi₂O₄ (ACO) composites as the photocathode matrix for ultrasensitive detection of ciprofloxacin (CIP) and ofloxacin (OFL). The formation of direct Z-scheme heterojunctions in ACO composites greatly aided electron/hole pair separation. Meanwhile, ZnIn₂S₄-decorated CdS nanorod arrays (CZIS) as the photoanode were used instead of a platinum counter electrode to provide electrons. The "signal-off" CIP detection was accomplished through the steric hindrance effect in the photoanode due to the combination of aptamer_(CIP) and CIP. To increase the cathodic photocurrent intensity for OFL determination, controlled release of luminol was first used. Luminol molecules were successfully embedded in the porous structure of silicon dioxide nanospheres (PSiO₂) by the electrostatic adsorption between PSiO₂ and aptamer_(OFL). The luminol released by specific recognition between OFL and aptamer_(OFL) could not only react with •O₂^- but also produce chemiluminescence emission, resulting in the "signal-on" state. Because of the signal "on-off-on", the proposed aptasensor exhibited wide linear ranges for CIP (0.001-100 ng/mL) and OFL (0.0005-100 ng/mL) detection. Furthermore, the low detection limits of CIP (0.06 pg/mL) and OFL (0.022 pg/mL) could achieve the ultrasensitive analysis.

Development of a new dual electrochemical immunosensor for a rapid and sensitive detection of enrofloxacin in meat samples

A novel dual electrochemical immunosensor was fabricated for the rapid and sensitive detection of enrofloxacin (EF) antibiotic in meat. Anti-quinolone antibody was immobilized onto screen-printed dual carbon electrodes via carbodiimide coupling. A new electrochemical probe was synthesized by conjugating difloxacin and aminoferrocene, whose oxidation was measured at + 0.2 V vs. Ag/AgCl by differential pulse voltammetry. The detection principle was based on the competitive binding of this conjugate and free EF on immobilized antibodies. The proposed immunosensor allowed detection of EF at concentrations ranging from 0.005 µg.mL^-1 to 0.01 µg.mL^-1 with a detection limit of 0.003 µg.mL^-1. The immunosensor was stable for at least 1 month at 4 °C and displayed a good specificity for other fluoroquinolones. The new dual electrode design offered an improved accuracy as one electrode was used as negative control. The efficiency of the sensor and the adequacy of the extraction process were finally validated by detecting EF in different meat samples.

Dipeptide nanoparticle and aptamer-based hybrid fluorescence platform for enrofloxacin determination

A novel fluorescence platform was fabricated for enrofloxacin determination by using cDNA-modified dipeptide fluorescence nanoparticles (FDNP-cDNA) and aptamer-modified magnetic Fe₃O₄ nanoparticles (Fe₃O₄-Apt). The FDNP were prepared via tryptophan-phenylalanine self-assembling. When magnetic Fe₃O₄-Apt incubated with standard solution or sample extracts, the target enrofloxacin was selectively captured by the aptamer on the surface of the Fe₃O₄ nanoparticles. After removing interference by washing with phosphate-buffered saline, the FDNP-cDNA was added, which can bind to the aptamer on the surface of the Fe₃O₄ nanoparticles not occupied by the analyte. The higher the concentration of the target enrofloxacin in the standard or sample solution is, the less the FDNP-cDNA can be bound with the Fe₃O₄ nanoparticles, and the more the FDNP-cDNA can be observed in the supernatant. Fluorescence intensity (E_x/E_m = 310/380 nm) increased linearly in the enrofloxacin concentration range 0.70 to 10.0 ng/mL with a detection limit of 0.26 ng/mL (S/N = 3). Good recoveries (88.17-99.30%) were obtained in spiked lake water, chicken, and eel samples with relative standard deviation of 2.7-6.2% (n = 3).

Selective detection of enrofloxacin in biological and environmental samples using a molecularly imprinted electrochemiluminescence sensor based on functionalized copper nanoclusters

Enrofloxacin (ENR) is a broad-spectrum fungicide that has been largely applied in pharmacy and animal-specific medicine. In this paper, a simple, novel and highly sensitive molecularly imprinted electrochemiluminescence (MIP-ECL) sensor based on mercaptopropionic acid-functionalized copper nanoclusters (MPA-Cu NCs) was developed to selectively detect enrofloxacin (ENR). MPA-Cu NCs prepared by a one-step method were used to modify the glassy carbon electrode. A molecularly imprinted polymer film containing the cavity was constructed after electropolymerization and elution. Under optimized conditions, the MIP-ECL sensor could detect ENR in the range of 0.1 nM-1 μM (R² = 0.9863) with a low limit of detection of 27 pM, and the recovery rates of ENR in biological and lake water samples were 88.20-105.0%. The MIP-ECL sensor provided path to improve the stability issues of Cu NCs, which might open promising avenues to develop new ECL systems for biological analysis and environmental water monitoring.

A Tb3+ functionalized triazine-porous organic framework as a ratiometric fluorescent sensor for determination of ciprofloxacin in aquatic products

A Tb3+ functionalized triazine-porous organic framework (Tb3+/TAPOF) was prepared by introducing Tb3+ into a triazine-porous organic framework through a coordination bond.

Determination of 13-cis-Retinoic Acid and Its Metabolites in Plasma by Micellar Electrokinetic Chromatography Using Cyclodextrin-Assisted Sweeping for Sample Preconcentration

The online preconcentration technique, cyclodextrin-assisted sweeping (CD-sweeping), coupled with micellar electrokinetic chromatography (MEKC) was established to determine 13-cis-retinoic acid (13-cis-RA), all-trans-retinoic acid (all-trans-RA) and 4-oxo-13-cis-retinoic acid (4-oxo-13-cis-RA) in human plasma. A CD-sweeping buffer (45 mM borate (pH 9.2), containing 80 mM sodium dodecyl sulfate (SDS) and 22 mM hydroxypropyl β-CD (HP-β-CD) was introduced into the capillary and, then, the sample dissolved in 70 mM borate (pH 9.2): methanol = 9:1 (v/v) was injected into capillary by pressure. The separation voltage was 23 kV. Compared to the conventional cyclodextrin-micellar electrokinetic chromatography (CD-MEKC) method, the new technique achieved 224-257-fold sensitivity enrichment of analytes. The limits of detection of 13-cis-RA, all-trans-RA were 1 ng/mL, whereas that of 4-oxo-13-cis-RA was 25 ng/mL in plasma. The linear ranges of 13-cis-RA, all-trans-RA were between 15 and 1000 ng/mL, whereas that of 4-oxo-13-cis-RA was between 75 and 1500 ng/mL. The coefficient of correlation between the concentration of analytes and peak area ratio of analytes and internal standard (2, 4-dihydroxy-benzophenone) for intra-day (n = 3) and inter-day (n = 5) analyses were both greater than 0.999. The optimized experimental conditions were successfully applied to determine 13-cis-retinoic acid and its metabolites in plasma samples from a patient during the administration of 13-cis-RA for treating acne.

Simultaneous detection of enrofloxacin and ciprofloxacin in milk using a bias potentials controlling-based photoelectrochemical aptasensor

It is important to develop highly-active photoelectrochemical (PEC) materials and use novel sensing strategy for constructing high-PEC-performance sensors with multiplex detection abilities, owing to the simultaneous presence of multiple antibiotic residues in food. Herein, a bias-potential-based PEC aptasensor was prepared for the trace detection of dual antibiotic analytes, enrofloxacin (ENR) and ciprofloxacin (CIP), which often coexist in milk samples. Here, two materials were developed with excellent PEC performance: three-dimensional nitrogen-doped graphene-loaded copper indium disulfide (CuInS₂/3DNG) and Bi³⁺-doped black anatase titania nanoparticles decorated with reduced graphene oxide (Bi³⁺/B-TiO₂/rGO). By applying different bias potentials to the two materials near one ITO electrode, the cathodic current generated by CuInS₂/3DNH and the anodic current generated by Bi³⁺/B-TiO₂/rGO could be clearly distinguished without interfering with each other. Then, ENR and CIP aptamers were respectively modified onto the surface of CuInS₂/3DNH and Bi³⁺/B-TiO₂/rGO to construct a PEC aptasensor for the sensitive detection of ENR and CIP. Under optimal conditions, the proposed aptasensor exhibited wide linear ranges of ENR (0.01-10000 ng/mL) and CIP (0.01-1000 ng/mL), and relatively low detection limits of 3.3 pg/mL to ENR and CIP (S/N = 3). The aptasensor was successfully applied to the detection of ENR and CIP in milk samples.

Batch injection analysis with amperometric detection for fluoroquinolone determination in urine, pharmaceutical formulations, and milk samples using a reduced graphene oxide-modified glassy carbon electrode

In this work, the batch injection analysis system with amperometric detection using reduced graphene oxide as a modifier of glassy carbon electrode (GCE) was investigated for the simple, fast, and sensitive monitoring of levofloxacin (LEVO) and ciprofloxacin (CIPRO) in samples of pharmaceutical formulations, synthetic urine, and milk (low- and high-fat content). LEVO and CIPRO were quantified in seven samples using amperometric measurements at +1.10 V vs Ag/AgCl, KCl(sat). The developed methods showed excellent analytical performance with limits of detection of 0.30 and 0.16 μmol L^-1, linear range from 3.0 to 50 μmol L^-1 and 1.0 to 50 μmol L^-1, relative standard deviation below 9.7 and 3.1%, and recovery ranges ranging from 80 to 107% and from 78 to 109% for LEVO and CIPRO, respectively. In addition, the minimum sample preparation (simple dilution) combined with a high analytical frequency (130 to 180 analyses per hour) can be highlighted. Thus, the methods are promising for implementation in routine analysis and quality control to different samples.

Rapid quality control of medicine and food dual purpose plant polysaccharides by matrix assisted laser desorption/ionization mass spectrometry

With their multiple biological activities and health benefit effects, polysaccharides from medicine and food dual purpose plants (MFDPPPs) have been extensively applied in many fields, including in medical treatments, stock farming, and cosmetics. However, to date, quality issues of MFDPPPs and technologies for the analysis of polysaccharides have posed challenges to chemists. Reported herein is a rapid and high-throughput quality control method for analyzing MFDPPPs, based on matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS). For the analysis of illegally added and doped substances, ferroferric oxide nanoparticles were employed as the MALDI matrix to avoid small molecule interference. Qualitatively, high sensitivity was obtained for both illegal drugs and glucose. Quantitatively, the best linear response (R2 > 0.99) was attained in the concentration range from 0.005 to 1 mg mL-1 for glucose. For the analysis of polysaccharides, 2,5-dihydroxybenzoic acid/N-methylaniline was employed as the MALDI matrix to increase the detection sensitivity and mass range coverage. Furthermore, the established method was successfully applied to the analysis of supplements from Astragalus polysaccharides and Lentinan real samples, showing its potential in quality control for MFDPPPs.

Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection-CZE (FASI-CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of -10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25-10.0 times, and the LODs were reduced from 0.2-0.5 to 0.02-0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59-106.59%. The intraday and interday precisions were 2.89-7.35% and 2.77-7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.

Terminal-conjugated non-aggregated constraints of gold nanoparticles on lateral flow strips for mobile phone readouts of enrofloxacin

Antibiotics abuse now poses a global threat to public health. Monitoring their residual levels as well as metabolites are of great importance, still challenges remain in in situ tracing during the circulation. Herein, taking the typical antibacterial Enrofloxacin (ENR) as a subject, a paper-based aptasensor was tailored by manipulating a duo of aptameric moieties to "sandwich" the target in a lateral-flow regime. To visualize the tight-binding sandwich motif more vividly, an irregular yet robust DNA-bridged gold nanoparticles (AuNPs) proximity strategy was developed with recourse to terminal deoxynucleotidyl transferase, of which the nonaggregate constraining feature was unveiled via optical absorption and scanning probe topography. This complex performed exceptionally better in the test strip context than single-particle tags, leading to an enhanced on-chip focusing. Rather than qualitative color developing, further efforts were taken to visualize the readouts in a quantitative manner by exploiting the smartphone camera for pattern recognition along with data processing in a professional App. Overall, this prototyped contraption realized a rapid and ultrasensitive quantification of ENR down to 0.1 μg/L along with a broad linear range over 5 orders of magnitude, plus excellent selectivity and precision even for real samples. Such innovative fusion across DNA-structured nanomanufacturing and intelligent perception provides a prospective and invigorating solution to point-of-care inspection.

Enhanced light-emitting diode induced fluorescence detection system with capillary electrophoresis

An enhanced fluorescence detection system of capillary electrophoresis (CE) was equipped with a concave silver mirror, by which the detection sensitivity of light-emitting diode induced fluorescence (LEDIF) can be increased greatly. The silver concave mirror and the cathode window in photomultiplier tube (PMT) were accurately set face to face at the same axis. When the two labeled tumor markers exactly moved to the center of detection window, the emission from analytes are excitated by LED source. Currently, the analytes may be regarded as a luminescent source point. When the source point exactly moves to the focus of the concave mirror, the emission of the labeled sample was collected effectively, enhanced by convergence and reflected by the concave mirror. Then it was sensitively detected by the PMT. The optical mechanism of enhancing detection sensitivity was explored. A simple comparative test on sensitivity was carried out, which aimed to compare sensitivity of the new detection system with concave mirror to that without concave mirror but the other conditions were kept the same. Two tumor markers labeled with FITC were selected for the test, using the simple LEDIF detect system. The results (LOD, 150 nM for L-Leu and L-Val) showed that the detection sensitivity matched with concave mirror reached more 16 times than the detection method without concave mirror.

Advances in the Analysis of Veterinary Drug Residues in Food Matrices by Capillary Electrophoresis Techniques

In the last years, the European Commission has adopted restrictive directives on food quality and safety in order to protect animal and human health. Veterinary drugs represent an important risk and the need to have sensitive and fast analytical techniques to detect and quantify them has become mandatory. Over the years, the availability of different modes, interfaces, and formats has improved the versatility, sensitivity, and speed of capillary electrophoresis (CE) techniques. Thus, CE represents a powerful tool for the analysis of a large variety of food matrices and food-related molecules with important applications in food quality and safety. This review focuses the attention of CE applications over the last decade on the detection of different classes of drugs (used as additives in animal food or present as contaminants in food products) with a potential risk for animal and human health. In addition, considering that the different sample preparation procedures have strongly contributed to CE sensitivity and versatility, the most advanced sample pre-concentration techniques are discussed here.

Enhanced photoelectrochemical sensing performance of graphitic carbon nitride by nitrogen vacancies engineering

Ciprofloxacin (CIP) as a typical antibiotic is widely used to produce antimicrobial drugs. Determination of CIP has raised extensive concern due to its possible toxic effects on human health. Here, a simple photoelectrochemical (PEC) sensor for detecting CIP has been developed by using the nitrogen-deficient graphitic carbon nitride (ND-g-CN) as a PEC active material. The ND-g-CN material exhibits two-dimension (2D) thin sheet structure with abundant nitrogen vacancies. The 2D thin sheet structure can enable the effective charge separation and transfer, thus dramatically improving the PEC performance. Simultaneously, nitrogen vacancies can serve as charge trap to efficiently inhibit the charge recombination. Furthermore, the synergistic effect of the two can widen the absorption edge and decrease the band gap of ND-g-CN material, resulting in increasing light harvesting and enhancing PEC performance. CIP can be oxidized by the holes of ND-g-CN, thus realizing effective charge separation, which can result in the amplification of the photocurrent. The designed PEC sensor demonstrated a wide detection range from 60 to 19090 ng L^-1 and a low detection limit of 20 ng L^-1 for CIP assay. This strategy broadens the application of graphitic carbon nitride (g-CN) material in PEC field and presents a promising potential for the practical application in the environmental monitoring.

A turn-on fluorescence probe Eu3+ functionalized Ga-MOF integrated with logic gate operation for detecting ppm-level ciprofloxacin (CIP) in urine

The threatening of antibiotic drugs for human and environment is being paid more and more attention. Ciprofloxacin (CIP), a strong quinolone antibiotic drug widely used in therapeutic treatments, is the most frequently detected in surface waters among the fluoroquinolones, which represents animal and human health risks. A novel highly fluorescent Ga-based hybrid (Eu³⁺@1) has been synthesized based on metal-organic framework (MOF) by encapsulating lanthanide cations Eu³⁺ in its channels. The as-synthesized compound possesses excellent water and pH-independent stability. It displays week red luminescence of Eu³⁺ in itself and can sense the CIP concentration as turn-on fluorescent probe in the human urine. With addition of CIP, the evident luminescence enhancement is clearly observed from the Eu³⁺@1. Linear correlation between the fluorescence intensity and the concentration of CIP is investigated, proving the excellent performance of Eu³⁺@1 in the detection of CIP with linear range (0.01-0.2 mg/mL) and low detection limit (2.4 ppm or 2.4 μg/mL). The response time is also very quick, less than 3 min. Based on these findings, we introduce AND logic gate strategy to the probe. The input of the logic gates (0, 1), (0, 1, 1), (1, 1, 1) cause the different outputs of CIP determination "LOW" (<25 ppm),"NORMAL" (25-76 ppm), "HIGH" (>76 ppm), respectively. The novel strategy can be applied for a real-time CIP concentration evaluation by intelligent discrimination.

Reverse flow injection spectrophotometric determination of ciprofloxacin in pharmaceuticals using iron from soil as a green reagent

A novel reverse flow injection spectrophotometric method for the determination of ciprofloxacin was successfully combined with the on-line introduction of an iron solution extracted from soil as green reagent. The assay was optimized by a univariate method to select the optimum conditions for the highest absorbance and highest stability of the complex. Beer-Lambert's law (λ_max=440nm) is obeyed in the range 0.5-50μgmL^-1 with a correlation coefficient (r²) of 0.9976 and 0.9996 using soil as green reagent from Khon Kaen, Thailand and Vientiane, Laos, respectively. The average percentage recoveries were in the range of 98.55-102.14% and the precision was in the range of 0.80-1.73%. The limit of detection and the limit of quantitation were 0.20 and 0.69μgmL^-1, respectively, with a sampling rate of over 46samplesh^-1. The method was successfully applied to the determination of ciprofloxacin in commercial pharmaceutical formulations. The results were in good agreement with those obtained by the reference HPLC method using a t-test at 95% of confidence level for comparison. This method is suitable for laboratories looking for alternative analytical methods using green reagents.

Recent advances in the application of capillary electromigration methods for food analysis and Foodomics

This review work presents and discusses the main applications of capillary electromigration methods in food analysis and Foodomics. Papers that were published during the period February 2015-February 2017 are included following the previous review by Acunha et al. (Electrophoresis 2016, 37, 111-141). The paper shows the large variety of food related molecules that have been analyzed by CE including amino acids, biogenic amines, carbohydrates, chiral compounds, contaminants, DNAs, food additives, heterocyclic amines, lipids, peptides, pesticides, phenols, pigments, polyphenols, proteins, residues, toxins, vitamins, small organic and inorganic compounds, as well as other minor compounds. This work describes the last results on food quality and safety, nutritional value, storage, bioactivity, as well as uses of CE for monitoring food interactions and food processing including recent microchips developments and new applications of CE in Foodomics.