Optimisation of the extraction and purification of chondroitin sulphate from head by-products of Prionace glauca by environmental friendly processes

Optimal and sustainable production of tailored fish protein hydrolysates from tuna canning wastes and discarded blue whiting: Effect of protein molecular weight on chemical and bioactive properties

Thousands tons of discards of blue whiting (BW) and tuna heads (YT) by-products are generated each year in Europe. BW is the species most discarded by European fishing fleet and, in some canning factories, YT are processed for the retrieval of oil rich in omega-3, but producing a huge amount of solid remains and effluents disposal as wastes. The development of optimal and sustainable processes for both substrates is mandatory in order to reach clean solutions under the circular economy precepts. This work focused on the mathematical optimization of the production of tailored fish protein hydrolysates (FPH), from blue whiting and tuna residues, in terms of controlling average molecular weights (Mw) of proteins. For the modeling of the protein depolymerization time-course, a pseudo-mechanistic model was used, which combined a reaction mechanistic equation affected, in the kinetic parameters, by two non-lineal equations (a first-order kinetic and like-Weibull formulae). In all situations, experimental data were accurately simulated by that model achieving R2 values higher than 0.96. The validity of the experimental conditions obtained from modeling were confirmed performing productions of FPH at scale of 5 L-reactor, without pH-control in most of cases, at the different ranges of Mw selected (1-2 kDa, 2-5 kDa and 5-10 kDa). The results showed that FPH from BW with lower Mw led to a remarkable yield of production (12 % w/w of substrate), largest protein contents (77 % w/w of BW hydrolysate), greatest in vitro digestibility (>95 %), highest essential amino acid presence (43 %) and the best antioxidant (DPPH = 62 %) and antihypertensive (IC50-ACE = 80 mg/L) properties. Our results prove that the proposed procedure to produce sustainable FPH, with specific Mw characterisitics, could be extended to other fish waste substrates. Tailored FPH may have the potential to serve as valuable ingredients for functional foods and high-quality aquaculture feed.

Chondroitin sulfate from heads of corb: Recovery, structural analysis and assessment of anticoagulant activity

In this study, glycosaminoglycans (GAGs) were extracted from corb (Sciaena umbra) heads and thoroughly examined for their structure. Through cellulose acetate electrophoresis, the GAGs were identified as chondroitin sulfate (CS), with a recovery yield of 10.35 %. The CS exhibited notable characteristics including a high sulfate content (12.4 %) and an average molecular weight of 38.32 kDa. Further analysis via 1H NMR spectroscopy and SAX-HPLC revealed that the CS primarily consisted of alternating units predominantly composed of monosulfated disaccharides at positions 6 and 4 of GalNAc (52.6 % and 38.8 %, respectively). The ratio of sulfate groups between positions 4 and 6 of GalNAc (4/6 ratio) was approximately 0.74, resulting in an overall charge density of 0.98. Thermal properties of the CS were assessed using techniques such as differential scanning calorimetry and thermogravimetric analysis. Notably, the CS demonstrated concentration-dependent prolongation of activated partial thromboplastin time (aPTT) and thrombin time (TT) while showing no effect on platelet function. At 200 μg/mL, aPTT and TT coagulation times were 1.4 and 3.7 times faster than the control, respectively. These findings suggest that CS derived from corb heads holds promise as an anticoagulant agent for therapy, although further clinical investigations are necessary to validate its efficacy.

Extraction, Physicochemical Properties, and In Vitro Antioxidant Activities of Chondroitin Sulfate from Bovine Nose Cartilage

Beef is an important high-nutrition livestock product, and several byproducts, such as bovine cartilage, are produced during slaughter. To effectively utilize these agricultural and pastoral byproducts, combined (trypsin-papain) enzymolysis and cetylpyridine chloride purification methods were used to obtain chondroitin sulfate (CS) from the nasal cartilage of Shaanxi Yellow cattle. The effects of pH, temperature, and time on the CS yield during enzymatic hydrolysis were investigated, and the CS extraction process was optimized using response surface methodology. The best yield of CS was 21.62% under the optimum conditions of pH 6.51, temperature of 64.53°C, and enzymolysis time of 19.86 h. The molecular weight of CS from Shaanxi cattle nasal cartilage was 89.21 kDa, glucuronic acid content was 31.76 ± 0.72%, protein content was 1.12 ± 0.03%, and sulfate group content was 23.34 ± 0.08%. The nasal cartilage CS of the Yellow cattle showed strong DPPH•, •OH, and ABTS+• radical scavenging abilities and ferrous reduction ability in the experimental concentration range. This study could contribute to "turn waste into treasure" and improve the comprehensive utilization of regional characteristic biological resources.

Future proofing of chondroitin sulphate production: Importance of sustainability and quality for the end-applications

Chondroitin sulphates (CSs) are the most well-known glycosaminoglycans (GAGs) found in any living organism, from microorganisms to invertebrates and vertebrates (including humans), and provide several health benefits. The applications of CSs are numerous including tissue engineering, osteoarthritis treatment, antiviral, cosmetics, and skincare applications. The current commercial production of CSs mostly uses animal, bovine, porcine, and avian tissues as well as marine organisms, marine mammals, sharks, and other fish. The production process consists of tissue hydrolysis, protein removal, and purification using various methods. Mostly, these are chemical-dependent and are complex, multi-step processes. There is a developing trend for abandonment of harsh extraction chemicals and their substitution with different green-extraction technologies, however, these are still in their infancy. The quality of CSs is the first and foremost requirement for end-applications and is dependent on the extraction and purification methodologies used. The final products will show different bio-functional properties, depending on their origin and production methodology. This is a comprehensive review of the characteristics, properties, uses, sources, and extraction methods of CSs. This review emphasises the need for extraction and purification processes to be environmentally friendly and gentle, followed by product analysis and quality control to ensure the expected bioactivity of CSs.

Recent progress in marine chondroitin sulfate, dermatan sulfate, and chondroitin sulfate/dermatan sulfate hybrid chains as potential functional foods and therapeutic agents

Chondroitin sulfate (CS), dermatan sulfate (DS), and CS/DS hybrid chains are natural complex glycosaminoglycans with high structural diversity and widely distributed in marine organisms, such as fish, shrimp, starfish, and sea cucumber. Numerous CS, DS, and CS/DS hybrid chains with various structures and activities have been obtained from marine animals and have received extensive attention. However, only a few of these hybrid chains have been well-characterized and commercially developed. This review presents information on the extraction, purification, structural characterization, biological activities, potential action mechanisms, and structure-activity relationships of marine CS, DS, and CS/DS hybrid chains. We also discuss the challenges and perspectives in the research of CS, DS, and CS/DS hybrid chains. This review may provide a useful reference for the further investigation, development, and application of CS, DS, and CS/DS hybrid chains in the fields of functional foods and therapeutic agents.

Nanoparticles Based on Chondroitin Sulfate from Tuna Heads and Chitooligosaccharides for Enhanced Water Solubility and Sustained Release of Curcumin

This study aimed to separate chondroitin sulfate (CS) from the heads of skipjack tuna (Katsuwonus pelamis) and yellowfin tuna (Thunnus albacares), by-products derived from canned tuna processing, via a biological process. The use of 1% w/w papain and an incubation time of 48 h resulted in a degree of hydrolysis of 93.75 ± 2.94% and a CS content of 59.53 ± 1.77 mg/100 g. The FTIR spectra of extracted CS products exhibited identical functional groups found in commercially available CS. The molecular weights of CS extracted from skipjack and yellowfin tuna heads were 11.0 kDa and 7.7 kDa, respectively. Subsequently, a CH:CS ratio of 3:2 for CS and chitooligosaccharides (CH) was chosen as the optimal ratio for the preparation of spherical nanoparticles, with %EE, mean particle size, PDI, and zeta potential values of 50.89 ± 0.66%, 128.90 ± 3.29 nm, 0.27 ± 0.04, and -12.47 ± 2.06, respectively. The CU content was enhanced to 127.21 ± 1.66 μg/mL. The release of CU from this particular nanosystem involved mainly a drug diffusion mechanism, with a burst release in the first 3 h followed by a sustained release of CU over 24 h. The DPPH and ABTS scavenging activity results confirmed the efficient encapsulation of CU into CHCS nanoparticles. This study will provide a theoretical basis for CS derived from tuna head cartilages to be used as a functional component with specific functional properties in food and biomedical applications.

A Concise Review of Extraction and Characterization of Chondroitin Sulphate from Fish and Fish Wastes for Pharmacological Application

Chondroitin sulphate (CS) is one of the most predominant glycosaminoglycans (GAGs) available in the extracellular matrix of tissues. It has many health benefits, including relief from osteoarthritis, antiviral properties, tissue engineering applications, and use in skin care, which have increased its commercial demand in recent years. The quest for CS sources exponentially increased due to several shortcomings of porcine, bovine, and other animal sources. Fish and fish wastes (i.e., fins, scales, skeleton, bone, and cartilage) are suitable sources of CS as they are low cost, easy to handle, and readily available. However, the lack of a standard isolation and characterization technique makes CS production challenging, particularly concerning the yield of pure GAGs. Many studies imply that enzyme-based extraction is more effective than chemical extraction. Critical evaluation of the existing extraction, isolation, and characterization techniques is crucial for establishing an optimized protocol of CS production from fish sources. The current techniques depend on tissue hydrolysis, protein removal, and purification. Therefore, this study critically evaluated and discussed the extraction, isolation, and characterization methods of CS from fish or fish wastes. Biosynthesis and pharmacological applications of CS were also critically reviewed and discussed. Our assessment suggests that CS could be a potential drug candidate; however, clinical studies should be conducted to warrant its effectiveness.

A Highly Active Chondroitin Sulfate Lyase ABC for Enzymatic Depolymerization of Chondroitin Sulfate

Enzymatic preparation of low-molecular-weight chondroitin sulfate (LMWCS) has received increasing attention. In this work, a chondroitin sulfate lyase ABC (Chon-ABC) was successfully cloned, expressed, and characterized. The K_m and V_max of the Chon-ABC were 0.54 mM and 541.3 U mg⁻¹, respectively. The maximal activity was assayed as 500.4 U mg⁻¹ at 37 °C in pH 8.0 phosphate buffer saline. The half-lives of the Chon-ABC were 133 d and 127 min at 4 °C and 37 °C, respectively. Enzymatic preparation of LMWCS was performed at room temperature for 30 min. The changes between the substrate and product were analyzed with mass spectrometry (MS), high-performance liquid chromatography (HPLC), gel permeation chromatography (GPC), and nuclear magnetic resonance (NMR). Overall, the Chon-ABC from Bacteroides thetaiotaomicron is competitive in large-scale enzymatic preparation of LMWCS for its high activity, stability, and substrate specificity.

Ultrasonic-Assisted Extraction and Structural Characterization of Chondroitin Sulfate Derived from Jumbo Squid Cartilage

Chondroitin sulfate (ChS) is usually used as an oral nutraceutical supplement, and has been popular in Asia, Europe, and United States for many years. In this study, a potential and sustainable source of ChS from jumbo squid (Dosidicus gigas) cartilage was explored; ultrasound-assisted extraction (UAE) was used to extract ChS from jumbo squid cartilage. The result of mass transfer coefficients based on Fick's law showed that UAE had higher mass transfer efficacy. The response surface methodology (RSM) combined with Box-Behnken design (BBD) was employed to evaluate the effects of the extraction parameters. The optimal conditions were extraction temperature of 52 °C, extraction time of 46 min, and NaOH concentration of 4.15%. The crude extract was precipitated by 50% ethanol, which obtained a purified ChS with 23.7% yield and 82.3% purity. The purified ChS measured by energy-dispersive X-ray spectroscopy (EDX) had a carbon to sulfur molar ratio of approximately 14:1. The FTIR, ¹H, and ¹³C NMR confirmed jumbo squid ChS were present in the form of chondroitin-4-sulfate and chondroitin-6-sulfate, with a 4S/6S ratio of 1.62. The results of this study provide an efficient process for production and purification of ChS, and are significant for the development and utilization of ChS from jumbo squid cartilage in the nutrient food or pharmaceutical industries.

Targeting joint inflammation for osteoarthritis management through stimulus-sensitive hyaluronic acid based intra-articular hydrogels

Numerous therapeutic strategies have been developed for osteoarthritis (OA) management, including intra-articular (IA) injections. The ideal IA formulation should control cartilage degradation and restore synovial fluid viscosity. To this end, we propose to combine thermo-sensitive polymers (poloxamers) with hyaluronic acid (HA) to develop suitable beta-lapachone (βLap) loaded IA formulations. The development of IA formulations with these components entails several difficulties: low βLap solubility, unknown βLap therapeutic dose and the bonded commitment of easy administration and viscosupplementation. An optimized formulation was designed using artificial intelligence tools based on the experimental results of a wide variety of hydrogels and its therapeutic capacity was evaluated on an ex vivo OA model. The formulation presented excellent rheological properties and significantly decreased the secretion of degradative (MMP13) and pro-inflammatory (CXCL8) molecules. Therefore, the developed formulation is a promising candidate for OA treatment restoring the synovial fluid rheological properties while decreasing inflammation and cartilage degradation.

Deciphering Structural Determinants in Chondroitin Sulfate Binding to FGF-2: Paving the Way to Enhanced Predictability of their Biological Functions

Controlling chondroitin sulfates (CSs) biological functions to exploit their interesting potential biomedical applications requires a comprehensive understanding of how the specific sulfate distribution along the polysaccharide backbone can impact in their biological activities, a still challenging issue. To this aim, herein, we have applied an “holistic approach” recently developed by us to look globally how a specific sulfate distribution within CS disaccharide epitopes can direct the binding of these polysaccharides to growth factors. To do this, we have analyzed several polysaccharides of marine origin and semi-synthetic polysaccharides, the latter to isolate the structure-activity relationships of their rare, and even unnatural, sulfated disaccharide epitopes. SPR studies revealed that all the tested polysaccharides bind to FGF-2 (with exception of CS-8, CS-12 and CS-13) according to a model in which the CSs first form a weak complex with the protein, which is followed by maturation to tight binding with k_D ranging affinities from ~1.31 μM to 130 μM for the first step and from ~3.88 μM to 1.8 nM for the second one. These binding capacities are, interestingly, related with the surface charge of the 3D-structure that is modulated by the particular sulfate distribution within the disaccharide repeating-units.

Extraction and Characterization of Collagen from Elasmobranch Byproducts for Potential Biomaterial Use

With the worldwide increase of fisheries, fish wastes have had a similar increase, alternatively they can be seen as a source of novel substances for the improvement of society's wellbeing. Elasmobranchs are a subclass fished in high amounts, with some species being mainly bycatch. They possess an endoskeleton composed mainly by cartilage, from which chondroitin sulfate is currently obtained. Their use as a viable source for extraction of type II collagen has been hypothesized with the envisaging of a biomedical application, namely in biomaterials production. In the present work, raw cartilage from shark (Prionace glauca) and ray (Zeachara chilensis and Bathyraja brachyurops) was obtained from a fish processing company and submitted to acidic and enzymatic extractions, to produce acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC). From all the extractions, P. glauca PSC had the highest yield (3.5%), followed by ray ASC (0.92%), ray PSC (0.50%), and P. glauca ASC (0.15%). All the extracts showed similar properties, with the SDS-PAGE profiles being compatible with the presence of both type I and type II collagens. Moreover, the collagen extracts exhibited the competence to maintain their conformation at human basal temperature, presenting a denaturation temperature higher than 37 °C. Hydrogels were produced using P. glauca PSC combined with shark chondroitin sulfate, with the objective of mimicking the human cartilage extracellular matrix. These hydrogels were cohesive and structurally-stable at 37 °C, with rheological measurements exhibiting a conformation of an elastic solid when submitted to shear strain with a frequency up to 4 Hz. This work revealed a sustainable strategy for the valorization of fisheries' by-products, within the concept of a circular economy, consisting of the use of P. glauca, Z. chilensis, and B. brachyurops cartilage for the extraction of collagen, which would be further employed in the development of hydrogels as a proof of concept of its biotechnological potential, ultimately envisaging its use in marine biomaterials to regenerate damaged cartilaginous tissues.

Optimal Recovery of Valuable Biomaterials, Chondroitin Sulfate and Bioapatites, from Central Skeleton Wastes of Blue Shark

The industrial filleting of blue shark (Prionace glauca) led to the generation of a large number of central skeletons of low interest to fishmeal plants handling such wastes. In this context, the present study describes the optimization of the hydrolysis process (pH 8.35, T 58 °C, 1% (v/w) of alcalase and t = 4 h) to produce chondroitin sulfate (CS) together with the recovery of bioapatites. Then, that hydrolysate was chemically treated with an optimal alkaline-hydroalcoholic-saline solution (0.48 M of NaOH, 1.07 volumes of EtOH and 2.5 g/L of NaCl) and finally purified by ultrafiltration-diafiltration (30 kDa) to obtain glycosaminoglycan with a purity of 97% and a productive yield of 2.8% (w/w of skeleton). The size of the biopolymer (CS) was of 58 kDa with prevalence of 6S-GalNAc sulfation (4S/6S ratio of 0.25), 12% of GlcA 2S-GalNAc 6S and 6% of non-sulfated disaccharides. Crude bioapatites were purified by pyrolysis and FT-Raman and XRD techniques confirm the presence of hydroxyapatite [Ca₅(PO₄)₃(OH)], with a molar mass of 502.3 g/mol, embedded in the organic matrix of the skeleton. The mineralized tissues of blue shark are promising marine sources for the extraction of high value biomaterials with clinical application in bone and tissue regeneration and are still completely unexplored.

Biotechnological Valorization of Food Marine Wastes: Microbial Productions on Peptones Obtained from Aquaculture By-Products

Based on a biotechnological strategy, in the present work several peptones are produced from the Alcalase hydrolysis (0.1-0.2% v/w, 56-64 °C, pH 8.27-8.98, 3 h) and thermal processing (105 °C, 60 min) of wastes generated from the industrial processing of turbot, salmon, trout, seabream and seabass. These peptones were included (in the range of 2.6-11 g/L of soluble protein) as main source of organic nitrogen (protein substrates) in low-cost media for the culture of lactic acid bacteria (LAB), marine probiotic bacteria (MPB) and ubiquitous Gram+ bacteria. In most cases, batch fermentations conducted in aquaculture peptone media led to the best growth, metabolic productions and yields. Nevertheless, no significant differences between aquaculture peptones and commercial media were generally observed. Kinetic parameters from a logistic equation and used for cultures modeling were applied with the purpose of comparing the bioproduction outcomes. In economical terms, the validity of the aquaculture peptones as substitutives of the peptones (meat extract, casitone, etc.) from commercial media was also compared. The decreasing of the costs for LAB bioproductions ranged between 3-4 times and the growth costs of MPB and Gram+ bacteria were improved more than 70 and 15 times, respectively, in relation to those found in control commercial media.

Chondroitin sulfate and hydroxyapatite from Prionace glauca shark jaw: Physicochemical and structural characterization

In the present work, the potential of the Prionace glauca jaw as a source of both chondroitin sulfate and bioapatite is explored. The sandwich-type structure in cross section of the jaw based on alternate layers with prevalence in organic tissue or mineralized is shown and these bands respectively confirmed as CS or hydroxyapatite -enriched zones. As result of this, an optimized process in sequential steps for the recovery of both biomaterials and their purification process is proposed, by combining enzymatic proteolysis, chemical precipitation and separation using ultrafiltration membrane for CS production together with controlled thermal treatment for hydroxyapatite obtaining. The purified CS was characterized by Gel Permeation Chromatography, Nuclear Magnetic Resonance and Strong Anion Exchange Chromatography, revealing a polymeric material with a molecular weight of 67 kDa, and prevalent 6S-GalNAc sulfation (68%), followed by 4S-GalNAc (13%), a significant proportion of disulfated disaccharides (12%) and only 7% of non-sulfated units. In the case of the bioapatite a purified biphasic 60:40 porous calcium phosphate of hydroxyapatite: whitlockite/β-TCP was confirmed. Hydroxyapatite as major component (85%) was also obtained for jaws directly subjected to the thermal treatment. This proved the influence of the enzymatic hydrolysis and centrifugation on the composition of the mineral fraction.

Hyaluronic acid and Chondroitin sulfate from marine and terrestrial sources: Extraction and purification methods

Hyaluronic acid (HA) and chondroitin sulfate (CS) are valuable bioactive polysaccharides that have been highly used in biomedical and pharmaceutical applications. Extensive research was done to ensure their efficient extraction from marine and terrestrial by-products at a high yield and purity, using specific techniques to isolate and purify them. In general, the cartilage is the most common source for CS, while the vitreous humor is main used source of HA. The developed methods were based in general on tissue hydrolysis, removal of proteins and purification of the target biopolymers. They differ in the extraction conditions, enzymes and/or solvents used and the purification technique. This leads to specific purity, molecular weight and sulfation pattern of the isolated HA and CS. This review focuses on the analysis and comparison of different extraction and purification methods developed to isolate these valuable biopolymers from marine and terrestrial animal by-products.

Production, Characterization, and Bioactivity of Fish Protein Hydrolysates from Aquaculture Turbot (Scophthalmus maximus) Wastes

The valorization of wastes generated in the processing of farmed fish is currently an issue of extreme relevance for the industry, aiming to accomplish the objectives of circular bioeconomy. In the present report, turbot (Scophthalmus maximus) by-products were subjected to Alcalase hydrolysis under the optimal conditions initially defined by response surface methodology. All the fish protein hydrolysates (FPHs) showed a high yield of digestion (>83%), very remarkable degrees of hydrolysis (30–37%), high content of soluble protein (>62 g/L), an excellent profile of amino acids, and almost total in vitro digestibility (higher than 92%). Antioxidant and antihypertensive activities were analyzed in all cases, viscera hydrolysates being the most active. The range of average molecular weights (Mw) of turbot hydrolysates varied from 1200 to 1669 Da, and peptide size distribution showed that the hydrolysate of viscera had the highest content of peptides above 1000 Da and below 200 Da.

Impact of Prevalence Ratios of Chondroitin Sulfate (CS)- 4 and -6 Isomers Derived from Marine Sources in Cell Proliferation and Chondrogenic Differentiation Processes

Osteoarthritis is the most prevalent rheumatic disease. During disease progression, differences have been described in the prevalence of chondroitin sulfate (CS) isomers. Marine derived-CS present a higher proportion of the 6S isomer, offering therapeutic potential. Accordingly, we evaluated the effect of exogenous supplementation of CS, derived from the small spotted catshark (Scyliorhinus canicula), blue shark (Prionace glauca), thornback skate (Raja clavata) and bovine CS (reference), on the proliferation of osteochondral cell lines (MG-63 and T/C-28a2) and the chondrogenic differentiation of mesenchymal stromal cells (MSCs). MG-G3 proliferation was comparable between R. clavata (CS-6 intermediate ratio) and bovine CS (CS-4 enrichment), for concentrations below 0.5 mg/mL, defined as a toxicity threshold. T/C-28a2 proliferation was significantly improved by intermediate ratios of CS-6 and -4 isomers (S. canicula and R. clavata). A dose-dependent response was observed for S. canicula (200 µg/mL vs 50 and 10 µg/mL) and bovine CS (200 and 100 µg/mL vs 10 µg/mL). CS sulfation patterns discretely affected MSCs chondrogenesis; even though S. canicula and R. clavata CS up-regulated chondrogenic markers expression (aggrecan and collagen type II) these were not statistically significant. We demonstrate that intermediate values of CS-4 and -6 isomers improve cell proliferation and offer potential for chondrogenic promotion, although more studies are needed to elucidate its mechanism of action.

Valorization of Aquaculture By-Products of Salmonids to Produce Enzymatic Hydrolysates: Process Optimization, Chemical Characterization and Evaluation of Bioactives

In the present manuscript, various by-products (heads, trimmings, and frames) generated from salmonids (rainbow trout and salmon) processing were evaluated as substrates for the production of fish protein hydrolysates (FPHs), potentially adequate as protein ingredients of aquaculture feeds. Initially, enzymatic conditions of hydrolysis were optimized using second order rotatable designs and multivariable statistical analysis. The optimal conditions for the Alcalase hydrolysis of heads were 0.1% (v/w) of enzyme concentration, pH 8.27, 56.2°C, ratio (Solid:Liquid = 1:1), 3 h of hydrolysis, and agitation of 200 rpm for rainbow trout and 0.2% (v/w) of enzyme, pH 8.98, 64.2 °C, 200 rpm, 3 h of hydrolysis, and S:L = 1:1 for salmon. These conditions obtained at 100 mL-reactor scale were then validated at 5L-reactor scale. The hydrolytic capacity of Alcalase and the protein quality of FPHs were excellent in terms of digestion of wastes (V_dig > 84%), high degrees of hydrolysis (H_m > 30%), high concentration of soluble protein (Prs > 48 g/L), good balance of amino acids, and almost full in vitro digestibility (Dig > 93%). Fish oils were recovered from wastes jointly with FPHs and bioactive properties of hydrolysates (antioxidant and antihypertensive) were also determined. The salmon FPHs from trimmings + frames (TF) showed the higher protein content in comparison to the rest of FPHs from salmonids. Average molecular weights of salmonid-FPHs ranged from 1.4 to 2.0 kDa and the peptide sizes distribution indicated that hydrolysates of rainbow trout heads and salmon TF led to the highest percentages of small peptides (0-500 Da).

Recent advance in delivery system and tissue engineering applications of chondroitin sulfate

Chondroitin sulfate (CS) is a naturally derived bioactive macromolecule and the major component of extracellular matrix (ECM), which widely distributed in various organisms and has attracted much attention due to their significant bioactivities. It is regarded as a favorable biomaterial that has been applied extensively in field of drug delivery and tissue engineering due to its property of non-poisonous, biodegradation, biocompatible and as a major component of ECM. The present article reviews the structure and bioactivities of CS, from the preparation to structure analysis, and emphatically focuses on the biomaterial exertion in delivery system and tissue engineering. At the same time, the present application status and prospect of CS are analyzed and the biomaterial exertion of CS in delivery system and various tissue engineering are also comparatively discussed in view of biomaterial development.

Optimization of AOT reversed micelle forward extraction of 7S globulin subunits from soybean proteins

The work attempted to study on separating the α', α and β subunits of 7S globulin from soybean proteins by reverse micelles. The effects of six single factors (W0, time, temperature, pH, surfactant concentration and salt solution species) on three subunit partitioning were discussed. The main influence factors (time, temperature and surfactant concentration) were optimized by the response surface test (Box-Behnken design, three factor three level) in order to optimize the forward extracting three subunits of 7S globulin. It was observed that the independent factor had substantial effect on the forward extraction yield of three subunits of 7S globulin. The statistical analysis showed that the reverse micelles could significantly affect the forward extraction efficiency of protein subunits. The highest forward extraction efficiency of α', α and β subunits achieved 78.21, 63.65 and 61.34%, respectively. The proposed method also showed that the forward extraction efficiency of subunits with larger molecular weight was higher than low molecular weight.

Isolation and Chemical Characterization of Chondroitin Sulfate from Cartilage By-Products of Blackmouth Catshark (Galeus melastomus)

Chondroitin sulfate (CS) is a glycosaminoglycan actively researched for pharmaceutical, nutraceutical and tissue engineering applications. CS extracted from marine animals displays different features from common terrestrial sources, resulting in distinct properties, such as anti-viral and anti-metastatic. Therefore, exploration of undescribed marine species holds potential to expand the possibilities of currently-known CS. Accordingly, we have studied for the first time the production and characterization of CS from blackmouth catshark (Galeus melastomus), a shark species commonly discarded as by-catch. The process of CS purification consists of cartilage hydrolysis with alcalase, followed by two different chemical treatments and ending with membrane purification. All steps were optimized by response surface methodology. According to this, the best conditions for cartilage proteolysis were established at 52.9 °C and pH = 7.31. Subsequent purification by either alkaline treatment or hydroalcoholic alkaline precipitation yielded CS with purities of 81.2%, 82.3% and 97.4% respectively, after 30-kDa membrane separation. The molecular weight of CS obtained ranges 53–66 kDa, depending on the conditions. Sulfation profiles were similar for all materials, with dominant CS-C (GlcA-GalNAc6S) units (55%), followed by 23–24% of CS-A (GlcA-GalNAc4S), a substantial amount (15–16%) of CS-D (GlcA2S-GalNAc6S) and less than 7% of other disulfated and unsulfated disaccharides.

A microbial-enzymatic strategy for producing chondroitin sulfate glycosaminoglycans

Chondroitin sulfate has been widely used in both medical and clinical applications. Commercial chondroitin sulfate has been mainly acquired from animal tissue extraction. Here we report a new two-step biological strategy for producing chondroitin sulfate A and chondroitin sulfate C. First, the chondroitin biosynthesis pathway in a recombinant Bacillus subtilis strain using sucrose as carbon source was systematically optimized and the titer of chondroitin was significantly enhanced to 7.15 g/L. Then, specific sulfation transformation systems were successfully constructed and optimized by combining the purified aryl sulfotransferase IV (ASST IV), chondroitin 4-sulfotransferase (C4ST) and chondroitin 6-sulfotransferase (C6ST). Chondroitin sulfate A and C were enzymatically transformed from chondroitin at conversion rates of 98% and 96%, respectively. The present biological strategy has great potential to be scaled up for biosynthesis of chondroitin sulfate A and C from cheap carbon sources.

Production of Fish Protein Hydrolysates from Scyliorhinus canicula Discards with Antihypertensive and Antioxidant Activities by Enzymatic Hydrolysis and Mathematical Optimization Using Response Surface Methodology

Fish discards are of major concern in new EU policies. Alternatives for the management of the new biomass that has to be landed is compulsory. The production of bioactive compounds from fish protein hydrolysates (FPH) has been explored in recent years. However, the viability of Scyliorhinus canicula discards, which might account for up to 90-100% of captures in mixed trawler, gillnet, and longline industrial fisheries, to produce FPH from the muscle with bioactivities has still not been studied in terms of the optimization of the experimental conditions to enhance its production. The effect of pH and temperature on the hydrolysis of the S.canicula muscle was mediated by three commercial proteases using response surface methodology. Temperatures of 64.6 °C and 60.8 °C and pHs of 9.40 and 8.90 were established as the best hydrolysis conditions for Alcalase and Esperase, respectively. Optimization of the best conditions for the maximization of antihypertensive and antioxidant activities was performed. Higher Angiotensin-converting enzyme (ACE) activity was found with Esperase. The pH optimum and temperature optimum for antioxidants were 55 °C/pH8.0 for ABTS/DPPH-Esperase, 63.1 °C/pH9.0 for DPPH-Alcalase, and 55 °C/pH9.0 for ABTS-Alcalase. No hydrolysis was detected when using Protamex.

Optimization of high purity chitin and chitosan production from Illex argentinus pens by a combination of enzymatic and chemical processes

The present report illustrates the optimisation of the experimental conditions for the chemical and enzymatic production of chitin and chitosan from Illex argentinus pen by-products. Optima conditions for chitin isolation were established at 0.82M NaOH/36.4°C, 57.5°C/pH=9.29, 59.6°C/pH=9.30 and 49.6°C/pH=5.91 for chemical, alcalase, esperase and neutrase deproteinization, respectively. Chitin samples were subsequently deacetylated by alkaline treatment reaching the highest degrees of deacetylation (DD>93%) at 61.0-63.7% of NaOH and 14.9-16.4h of hydrolysis depending on the type of process previously performed to the squid pens. Molecular weight (as number average molecular weight, Mn) of chitosan produced in the experimental designs ranged from 143kDa (PDI 2.37) to 339kDa (PDI 2.38).

Hydrolysates of Fish Skin Collagen: An Opportunity for Valorizing Fish Industry Byproducts

During fish processing operations, such as skinning and filleting, the removal of collagen-containing materials can account for up to 30% of the total fish byproducts. Collagen is the main structural protein in skin, representing up to 70% of dry weight depending on the species, age and season. It has a wide range of applications including cosmetic, pharmaceutical, food industry, and medical. In the present work, collagen was obtained by pepsin extraction from the skin of two species of teleost and two species of chondrychtyes with yields varying between 14.16% and 61.17%. The storage conditions of the skins appear to influence these collagen extractions yields. Pepsin soluble collagen (PSC) was enzymatically hydrolyzed and the resultant hydrolysates were ultrafiltrated and characterized. Electrophoretic patterns showed the typical composition of type I collagen, with denaturation temperatures ranged between 23 °C and 33 °C. In terms of antioxidant capacity, results revealed significant intraspecific differences between hydrolysates, retentate, and permeate fractions when using β-Carotene and DPPH methods and also showed interspecies differences between those fractions when using DPPH and ABTS methods. Under controlled conditions, PSC hydrolysates from Prionace glauca, Scyliorhinus canicula, Xiphias gladius, and Thunnus albacares provide a valuable source of peptides with antioxidant capacities constituting a feasible way to efficiently upgrade fish skin biomass.

Enzymatic Processes in Marine Biotechnology

In previous review articles the attention of the biocatalytically oriented scientific community towards the marine environment as a source of biocatalysts focused on the habitat-related properties of marine enzymes. Updates have already appeared in the literature, including marine examples of oxidoreductases, hydrolases, transferases, isomerases, ligases, and lyases ready for food and pharmaceutical applications. Here a new approach for searching the literature and presenting a more refined analysis is adopted with respect to previous surveys, centering the attention on the enzymatic process rather than on a single novel activity. Fields of applications are easily individuated: (i) the biorefinery value-chain, where the provision of biomass is one of the most important aspects, with aquaculture as the prominent sector; (ii) the food industry, where the interest in the marine domain is similarly developed to deal with the enzymatic procedures adopted in food manipulation; (iii) the selective and easy extraction/modification of structurally complex marine molecules, where enzymatic treatments are a recognized tool to improve efficiency and selectivity; and (iv) marine biomarkers and derived applications (bioremediation) in pollution monitoring are also included in that these studies could be of high significance for the appreciation of marine bioprocesses.

Cationic imprinting of Pb(II) within composite networks based on bovine or fish chondroitin sulfate

Imprinting chondroitin sulfate (CS)/silica composites with Pb(II) and Cu(II) cations was explored with CS of bovine and different fish species origin. The process was based on the assumption that particular arrangements of the linear CS chains in aqueous solution, induced so as to accommodate cross complexation with the cations, would be embodied into a tridimensional matrix created through an organoalkoxysilane sol-gel scheme. The presence of Cu(II) in the synthesis of the composites did not result in the production of significantly stronger Cu(II)-oriented binding arrangements, and therefore, the imprinting was not successful. Inversely, for Pb(II), the materials obtained exhibited a "memory" effect for the Pb(II) ions, expressed in the observation of stronger (13%-44%) binding as compared to the nonimprinted counterparts, and increased selectivity (1.5-2 folds) against Cd(II). The imprinting features observed were dependent on the CS source. However, it was not possible to identify, among a set of their properties (carboxylate and sulfate abundance, percent of disulfated units, 4S/6S ratio, and molecular weight), any that correlated directly with the observed imprinting features. The augmented selectivity provided by the cation-imprinting process may be advantageous in areas such as analytical separation, remediation, purification, sensing, and others, particularly in those cases where a certain cation is of special interest within a mixture of them.

Modelling of the production of ACE inhibitory hydrolysates of horse mackerel using proteases mixtures

Fish protein hyrolysates from Mediterranean horse mackerel were produced by using a mixture of two commercial endoproteases (i.e. subtilisin and trypsin) at different levels of substrate concentration, temperature and percentage of subtilisin in the enzyme mixture.