Preconcentration and trace determination of copper (II) in Thai food recipes using Fe 3 O 4 @Chi–GQDs nanocomposites as a new magnetic adsorbent

Digital image determination of copper in food and water after preconcentration and magnetic tip separation for in-cavity desorption/color development

A new analytical method for measuring copper in food and water was developed and validated, employing a solid-phase extraction (SPE) technique combined with digital-image-based (DIB) detection. A novel magnetic adsorbent of zinc ferrite/Citrullus colocynthis biochar (ZF@C.BC) was used to preconcentrate copper. A magnetic tip was used to separate the copper-loaded adsorbent from the extraction medium and to dispense it to the DIB plate. In-situ desorption and development of the spot color with iodide-starch reagent were carried out, and a digital image of the developed spots was captured using a smartphone and processed using ImageJ software. The copper adsorption capacity was 91.3 mg g-1. Desorption was effected using a 0.3 mol L-1 hydrochloric acid. The preconcentration factor was 300, the limit of detection was 4.8 μg L-1, the linearity was 16-600 μg L-1 and the sample throughput was 12 h-1. The developed approach was validated by analyzing food and water samples, confirming recoveries ≥ 91 % and 88 %, respectively, with RSD ≤ 8.4 %, n = 3.

Selective and fast magnetic dispersive solid phase micro-extraction of copper and lead in water and vegetables after synthesis of magnetic mesoporous carbon

Magnetic mesoporous carbon (Fe3O4@C, MMC) was synthesized and characterized. It was used for the first time as a sorbent for the magnetic dispersive solid phase microextraction (M-dSPμE) of copper and lead in water and vegetables. FAAS was used to determine the analyte concentrations after elution. The MMC was found to be have surface area of 145.9 m2 g-1 and average pore diameter of 15 nm. The analytical parameters affecting M-dSPμE of copper and lead were optimized. They were pH of sample, 6; eluent, 2 mol L-1 HCl (3 mL); and sample volume, 250 mL. The MMC reaches equilibrium very fast without vortexing for adsorption and only 5 s for elution. The LOD and PF of the M-dSPμE method for copper and lead were found to be 0.87 μg L-1 and 83 for Cu(II) and 2.8 μg L-1 and 167 for Pb(II), respectively. The precision of the M-dSPμE method was found to be ≤ 3.2%. The M-dSPμE method was verified by certificate reference materials (TMDA-53.3 Fortified Lake water and NIST SRM 1573a Tomato Leaves). It was successfully applied to the determination of copper and lead in lake water, wastewaters, sea water, radish, spinach, lettuce, and celery samples.

Determination of bioactive flavonoids using β-cyclodextrin combined with chitosan-modified magnetic nanoparticles

To accurately determine flavonoids (rutin, quercetin or kaempferol), it is necessary to extract them from complex matrices. The ultrasound-assisted magnetic dispersion microsolid phase extraction technique has been predominantly used for separation and enrichment of the target analytes. The combination of magnetic chitosan nanoparticles and a deep eutectic supramolecular solvent (DESP) is likely to enhance the efficiency of flavonoid extraction from food. In this study, adsorbents were prepared by modifying chitosan with magnetic nanoparticles, and the eluent was a DESP derived from β-cyclodextrin and an organic acid. The successful preparation of these materials was confirmed by FTIR, XRD, FE-SEM and 1H NMR. The extraction recovery rates exceeded 93 %, with limits of detection and quantitation ranging from 0.9 to 2.4 μg/L and 2.7 to 7.2 μg/L, respectively, and the flavonoid clearance rates for ABTS and DPPH radicals reached 100 %. Therefore, the integration of magnetic chitosan nanoparticles with the DESP provides a new and efficient method for the extraction of flavonoids while also presenting a potential application of the DESP in separations.

One-pot synthesis of iron oxide - Gamma irradiated chitosan modified SBA-15 mesoporous silica for effective methylene blue dye removal

The development of adsorption technology and the processing of radiation have both been influenced by chitosan adsorbent (γ-chitosan), a raw material with unique features. The goal of the current work was to improve the synthesis of Fe-SBA-15 utilizing chitosan that has undergone gamma radiation (Fe-γ-CS-SBA-15) in order to investigate the removal of methylene blue dye in a single hydrothermal procedure. High-resolution transmission electron microscopy (HRTEM), High angle annular dark field scanning transmission electron microscopy (HAADF-STEM), small- and wide-angle X-ray powder diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR) and Energydispersive X-ray spectroscopy (EDS) were used to characterize γ-CS-SBA-15 that had been exposed to Fe. By using N₂-physisorption (BET, BJH), the structure of Fe-γ-CS-SBA-15 was investigated. The study parameters also included the effect of solution pH, adsorbent dose and contact time on the methylene blue adsorption. The elimination efficiency of the methylene blue dye was compiled using a UV-VIS spectrophotometer. The results of the characterization show that the Fe-γ-CS-SBA-15 has a substantial pore volume of 504 m² g^-1 and a surface area of 0.88 cm³ g^-1. Furthermore, the maximum adsorption capacity (Q_max) of the methylene blue is 176.70 mg/g. The γ-CS can make SBA-15 operate better. It proves that the distribution of Fe and chitosan (the C and N components) in SBA-15 channels is uniform.

Hybrid biomaterials to preconcentrate and determine toxic metals and metalloids: a review

Toxic elements represent a serious threat to the environment and cause harmful effects on different environmental components, even at trace levels. These toxic elements are often difficult to detect through the typical instrumentation of an analytical laboratory because they are found at very low concentrations in matrices such as food and water. Therefore, preconcentration plays a fundamental role since it allows the effects of the matrix to be minimized, thus reaching lower detection limits and greater sensitivity of detection techniques. In recent years, solid-phase extraction has been successfully used for the preconcentration of metals as an environmentally friendly technique due to the fact that it eliminates or minimizes the use of reagents and solvents and offers reduced analysis times and low generation of waste in the laboratory. Hybrid biomaterials are low-cost, eco-friendly, and useful as efficient solid phases for the preconcentration of elements. In this review, recent investigations based on the use of hybrid biomaterials for the preconcentration and determination of toxic metals are presented and discussed, given special attention to bionanomaterials. A brief description of hybrid biomaterials often used for analytical purposes, as well as analytical techniques mostly used to characterize the hybrid biomaterials, is explained. Finally, the future prospects that encourage the search for new hybrid biomaterials are commented upon.

Application of Iron Nanoparticle-Based Materials in the Food Industry

Due to their different properties compared to other materials, nanoparticles of iron and iron oxides are increasingly used in the food industry. Food technologists have especially paid attention to their ease of separation by magnetic fields and biocompatibility. Unfortunately, the consumption of increasing amounts of nanoparticles has raised concerns about their biotoxicity. Hence, knowledge about the applicability of iron nanoparticle-based materials in the food industry is needed not only among scientists, but also among all individuals who are involved in food production. The first part of this article describes typical methods of obtaining iron nanoparticles using chemical synthesis and so-called green chemistry. The second part of this article describes the use of iron nanoparticles and iron nanoparticle-based materials for active packaging, including the ability to eliminate oxygen and antimicrobial activity. Then, the possibilities of using the magnetic properties of iron nano-oxides for enzyme immobilization, food analysis, protein purification and mycotoxin and histamine removal from food are described. Other described applications of materials based on iron nanoparticles are the production of artificial enzymes, process control, food fortification and preserving food in a supercooled state. The third part of the article analyzes the biocompatibility of iron nanoparticles, their impact on the human body and the safety of their use.

Nickel hydroxide nanoflower-based dispersive solid-phase extraction of copper from water matrix

In this work, a dispersive solid-phase extraction method based on Ni(OH)₂ nanoflowers (Ni(OH)₂-NFs-DSPE) was developed to separate and preconcentrate copper ions from tap water samples for determination by flame atomic absorption spectrometry (FAAS). Ni(OH)₂-NFs was synthesized using a homogeneous precipitation technique and used as sorbent for copper preconcentration. X-ray diffraction, scanning electron microscopy, and Fourier-transform infrared spectroscopy were used to characterize the synthesized sorbent. All experimental variables were carefully optimized to achieve a high enhancement factor of 107.5-folds with respect to the detection sensitivity of the conventional FAAS. The proposed method's analytical parameters including LOD, LOQ, and linear range were determined as 1.33 μg/L, 4.42 μg/L, and 3.0-40 μg/L, respectively. To assess the applicability and reliability of the developed method, optimal conditions were applied to tap water samples and satisfactory percent recoveries (94-103%) were obtained for the samples spiked at 20 and 30 μg/L. This validated the accuracy and feasibility of the developed method to real samples. The developed method can be described as a simple, efficient, and rapid analytical approach for the accurate determination of trace copper ions in water samples.

Design, Preparation, and Application of Magnetic Nanoparticles for Food Safety Analysis: A Review of Recent Advances

This review (with 126 references) aims at providing an updated overview of the recent developments and innovations of the preparation and application of magnetic nanoparticles for food safety analysis. During the past two decades, various magnetic nanoparticles with different sizes, shapes, and surface modifications have been designed, synthesized, and characterized with the prospering development of material science. Analytical scientists and food scientists are among the ones who bring these novel materials from laboratories to commercial applications. Powerful and versatile surface functional groups and high surface to mass ratios make these magnetic nanoparticles useful tools for high-efficiency capture and preconcentration of certain molecules, even when they exist in trace levels or complicated food matrices. This is why more and more methods for sensitive detection and quantification of hazards in foods are developed based on these magic magnetic tools. In this review, the principles and superiorities of using magnetic nanoparticles for food pollutant analysis are first introduced, like the mechanism of magnetic solid phase extraction, a most commonly used method for food safety-related sample pretreatment. Their design and preparation are presented afterward, alongside the mechanisms underlying their application for different analytical purposes. After that, recently developed magnetic nanoparticle-based methods for dealing with food pollutants such as organic pollutants, heavy metals, and pathogens in different food matrices are summarized in detail. In the end, some humble outlooks on future directions for work in this field are provided.

Application of polysaccharide biopolymers as natural adsorbent in sample preparation

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.

Surface Plasmon Resonance Sensor for Novel Detection of Histidine Based on the Hg2+ Induced Aggregation of AuNPs Followed by Preconcentration with Chitosan Gel as Solid-phase Biosorbent

This research work aims to propose an extraction method using chitosan as the sorbent and gold nanoparticles (AuNPs) as the colorimetric sensor for the development of a simple, cost-effective, rapid, sensitive, and selective detection method for histidine. The colorimetric assay is based on the aggregation of AuNPs in the presence of Hg2+ ions and histidine. The state of AuNPs generally changes from dispersion to aggregation. The change in state is accompanied by a corresponding change in color (from red wine to blue). Therefore, the solid phase extraction (SPE) method using chitosan as the sorbent was used to extract the AuNPs to improve the sensitivity of detection. It was found that the extraction by means of a sensor system using chitosan could increase the detection signal for histidine by 10 times. The calibration curve, which is the plot of absorbance ratio (A650/A528) against the concentration of histidine, shows a linear relation in the concentration range of 100 - 800 nM. The limit of detection (LOD) and limit of quantitation (LOQ) of the method were found to be 99.88 and 107.45 nM, respectively. Good recoveries were also obtained (range: 99.75 - 104.43%) with relative standard deviations (RSDs) below 5.89% in real water samples. Moreover, this method can be used for the selective detection of histidine even in the presence of other amino acids. The proposed method has been successfully used in the determination of histidine in mineral water samples.

Ultratrace Detection of Nickel(II) Ions in Water Samples Using Dimethylglyoxime-Doped GQDs as the Induced Metal Complex Nanoparticles by a Resonance Light Scattering Sensor

This study aimed to synthesize dimethylglyoxime (DMG) (N-source)-doped graphene quantum dots (N-GQDs) via simultaneous pyrolysis of citric acid and 1.0% (w/v) DMG. The maximum excitation wavelength (λmax, ex = 380 nm) of the N-GQD solution (49% quantum yield (QY)) was a red shift with respect to that of bare GQDs (λmax, ex = 365 nm) (46% QY); at the same maximum emission wavelength (λmax, em = 460 nm), their resonance light scattering (RLS) intensity peak was observed at λmax, ex/em = 530/533 nm. FTIR, X-ray photoelectron spectroscopy, XRD, energy-dispersive X-ray spectroscopy, and transmission electron microscopy analyses were performed to examine the synthesized materials. The selective and sensitive detection of Ni2+ using the RLS intensity was performed at 533 nm under the optimum conditions consisting of both 25 mg L-1 N-GQDs and 2.5 mg L-1 DMG in the ammonium buffer solution of pH 9.0. The linearity of Ni2+ was 50.0-200.0 μg L-1 with a regression line, y = 5.031x - 190.4 (r 2 = 0.9948). The limit of detection (LOD) and the limit of quantitation (LOQ) were determined to be 20.0 and 60.0 μg L-1, respectively. The method precision expressed as % RSDs was 4.90 for intraday (n = 3 × 3) and 7.65 for interday (n = 5 × 3). This developed method afforded good recoveries of Ni2+ in a range of 85-108% when spiked with real water samples. Overall, this innovative method illustrated the identification and detection of Ni2+ as a DMG complex with N-GQDs, and the detection was highly sensitive and selective.

A Fluorescence Switching Sensor for Sensitive and Selective Detections of Cyanide and Ferricyanide Using Mercuric Cation-Graphene Quantum Dots

This study aims to use graphene quantum dots (GQDs) as a fluorescence switching sensor (turn on-off) for the simultaneous detection of cyanide (CN-) and ferricyanide [Fe(CN)6]3- in wastewater samples. The GQDs were synthesized by pyrolyzing solid citric acid. The intrinsic blue color of the solution was observed under ultraviolet irradiation. The fluorescence spectrum was maximized at both excitation and emission wavelengths of 370 and 460 nm, respectively. The fluorescence intensity of GQDs decorated with Hg2+ (turn-off mode as the starting baseline) could be selectively turned on in the presence of CN- and once back to turn-off mode by [Fe(CN)6]3-. The fluorescence switching properties were used to develop a fluorescence turn-on-off sensor that could be used to detect trace amounts of CN- and [Fe(CN)6]3- in water samples. For highly sensitive detection under optimum conditions (Britton-Robinson buffer solution in the pH range of 8.0-9.0, linearity ranges of 5.0-15.0 μM (R 2 = 0.9976) and 10.0-50.0 μM (R 2 = 0.9994), respectively, and detection limits of 3.10 and 9.48 μM, respectively), good recoveries in the ranges of 85.89-112.66% and 84.88-113.92% for CN- and [Fe(CN)6]3-, respectively, were recorded. The developed methods were successfully used for the simultaneous and selective detection of CN- and [Fe(CN)6]3- in wastewater samples obtained from local municipal water reservoirs.

Application of a novel poly(SMAm)-Tris-Fe3O4 nanocomposite for selective extraction and enrichment of Cu(I) /Cu(II) from beer, soft drinks and wine samples, and speciation analysis by micro-volume UV-Vis spectrophotometry

In this study, a novel functional nanocomposite was synthesized, characterized and selectively used in pH-controlled separation, pre-concentration and speciation analysis of Cu(I) and Cu(II) from sample matrices where extraction is assisted, facilitated and greatly enhanced by ultrasound energy. The hydrophilic composite material functionalized with tris(2-hydroxymethyl)aminomethane (Tris) and Fe₃O₄ NPs was characterized in detail by ATR-FT-IR, ¹H NMR, XRD, EDX peaks and SEM images. After optimization of the main variables influencing extraction efficiency such as pH, volumes of buffer, modified copolymer in acetone, CTAB and Triton X-114 at fixed concentrations including sonication conditions, the Cu(I) and Cu(II) were monitored against a blank at 347 nm by micro-volume UV-vis spectrophotometer. A good linearity was obtained in the range of 2-140 and 5-150 μg L^-1 for Cu(II) and Cu(I) with r² ≥ 0.993. The limits of detection (LODs) of 0.66 and 1.60 μg L^-1 for each analyte, were obtained from a pre-concentration of 70-fold. After validation, the method was applied to speciation of Cu(I), Cu(II), and total Cu in the pre-treated and diluted beverage samples before and after pre-oxidation of Cu(I) to Cu(II) due to be more sensitive of extraction process to Cu(II) at pH 6.0. The results were also compared with those obtained by FAAS analysis to ensure the reliability of the results. It was observed that there was a statistically good agreement between the results of both methods.

Development of magnetic dispersive micro-solid phase extraction based on magnetic agarose nanoparticles and deep eutectic solvents for the isolation and pre-concentration of three flavonoids in edible natural samples

In the present study, an environmentally friendly magnetic dispersive micro-solid phase extraction was developed based on magnetic agarose nanoparticles and deep eutectic solvents for the isolation and pre-concentration of three flavonoids (morin, quercetin, and kaempferol) from dark tea, chocolate, vegetable, and fruit juice samples. In this method, deep eutectic solvents were synthesized from less toxic and low-cost substances under feasible conditions and used as eluents in the desorption process. These solvents can be considered as a green alternative to traditional organic reagents to increase the adsorption capacity and reduce the matrix interferences, dangerous waste generation and environmental pollution. A Plackett-Burman design was employed for screening the experimental variables. The effective variables were then optimized by Box-Behnken design (BBD). Under the optimial conditions, the presented method demonstrated wide linear ranges of 1-500 μg. L^-1 for morin and quercetin, and 5-500 μg. L^-1 for kaempferol with satisfactory recoveries above 91%. Limit of detections (LODs) and quantifications (LOQs) of flavonoids varied in 0.2-1.1 μg. L^-1 and 0.66-3.63 μg. L^-1, respectively. The precision of the proposed method was the range of 2.6-5.7%.

Engineered N-doped graphene quantum dots/CoFe2O4 spherical composites as a robust and retrievable catalyst: fabrication, characterization, and catalytic performance investigation in microwave-assisted synthesis of quinoline-3-carbonitrile derivatives

Nitrogen-doped graphene quantum dots (N-GQDs), which are less than 10 nm in size, are an interesting member of the nanocarbon materials family. N-GQDs nanostructures have been broadly applied in various fields, such as drug-gene delivery systems, photocatalytic reactions, and catalysts, owing to their unique properties. However, N-GQDs have rarely been introduced as a catalyst in organic synthesis. Herein, CoFe₂O₄ nanocomposites with diverse morphologies are fabricated in various conditions (e.g. green routes, various pH adjusters, temperatures). Due to further active sites on the surface of the nanocomposites, morphology engineering can be effective in catalytic activities. Following the synthesis, the catalytic activity of the engineered CoFe₂O₄ nanocomposites was screened, and it presented the order of spherical > rod > prism > cubic. The uniform spherical morphology provides more accessible active sites. Then, the novel nano-sized N-GQDs/CoFe₂O₄ magnetic spherical composite was readily fabricated by a green, low-cost, and easy hydrothermal route. The engineered composite was applied as an efficient magnetic nanocatalyst for the MW-assisted one-pot synthesis of new and known quinoline-3-carbonitrile derivatives (83–96%) in the shortest reaction time (60–90 s). Furthermore, the green route, easy separation of the nanocatalyst, and reusability (7 runs) without noticeable loss of catalytic efficiency are other advantages.

Sustainable fabrication of spherical N-GQDs/CoFe₂O₄ nanocomposites as a novel magnetically retrievable catalyst for the synthesis of quinoline-3-carbonitrile derivatives has been developed.

Greenness of magnetic nanomaterials in miniaturized extraction techniques: A review

Green analytical chemistry principles should be followed, as much as possible, and particularly during the development of analytical sample preparation methods. In the past few years, outstanding materials such as ionic liquids, metal-organic frameworks, carbonaceous materials, molecularly imprinted materials, and many others, have been introduced in a wide variety of miniaturized techniques in order to reduce the amount of solvents and sorbents required during the analytical sample preparation step while pursuing more efficient extraction methods. Among them, magnetic nanomaterials (MNMs) have gained special attention due to their versatile properties. Mainly, their ability to be separated from the sample matrix using an external magnetic field (thus enormously simplifying the entire process) and their easy combination with other materials, which implies the inclusion of a countless number of different functionalities, highly specific in some cases. Therefore, MNMs can be used as sorbents or as magnetic support for other materials which do not have magnetic properties, the latter permiting their combination with novel materials. The greenness of these magnetic sorbents in miniaturized extractions techniques is generally demonstrated in terms of their ease of separation and amount of sorbent required, while the nature of the material itself is left unnoticed. However, the synthesis of MNMs is not always as green as their applications, and the resulting MNMs are not always as safe as desired. Is the analytical sample preparation field ready for using green magnetic nanomaterials? This review offers an overview, from a green analytical chemistry perspective, of the current state of the use of MNMs as sorbents in microextraction strategies, their preparation, and the analytical performance offered, together with a critical discussion on where efforts should go.

Ultrasonic-assisted recycling of Nile tilapia fish scale biowaste into low-cost nano-hydroxyapatite: Ultrasonic-assisted adsorption for Hg2+ removal from aqueous solution followed by "turn-off" fluorescent sensor based on Hg2+-graphene quantum dots

This study was planned to recycle calcium and the phosphorus-rich Nile tilapia fish scale biowaste into nano-hydroxyapatite (FHAP), using ultrasonic-assisted extraction of calcium and phosphorus from fish scales, which was optimized in term of extraction time, acid concentration, extraction temperature, and ultrasonic power. These two elements were determined simultaneously by inductively coupled plasma atomic emission spectrometry and the FHAP phase was formed upon addition of the extracted element solution in alkaline medium using homogenous precipitation assisted with ultrasound energy. The FHAP adsorbent was characterized by x-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller. A combination of FHAP and the ultrasonic method was then used to remove Hg²⁺ from aqueous solution. Four significant variables affecting Hg²⁺ removal, namely, adsorbent dosage, pH, ultrasonic power, and adsorption time, were studied. The results exhibited that the optimal conditions for maximizing the removal of Hg²⁺ were 0.02 g adsorbent dosage, pH 8, 0.4 kW ultrasonic power, 20 min adsorption time, and 30 °C adsorption temperature. The sorption mechanism of Hg²⁺ was revealed by isotherm modeling, indicating that FHAP adsorbent has a potential for Hg²⁺ removal in aqueous media with the maximum adsorption capacity being 227.27 mg g^-1. This adsorption behavior is in agreement with the Langmuir model as reflected by a satisfactory R² value of 0.9967, when the kinetics data were fitted with pseudo-second-order. Therefore, the FHAP could be an alternative adsorbent for the ultrasonic-assisted removal of Hg²⁺ at very high efficiency and within a very short period of time.

Green and facile synthesis of water-soluble carbon dots from ethanolic shallot extract for chromium ion sensing in milk, fruit juices, and wastewater samples

Self-functionalized carbon dots (CDs) were prepared from ethanolic shallot extract to obtain a total phenolic precursor.

Preconcentration of Lead in Blood and Urine Samples Among Bladder Cancer Patients Using Mesoporous Strontium Titanate Nanoparticles

In this work, mesoporous strontium titanate nanoparticles (SrTiO₃ NPs) were synthesized through a single-step combustion process and were characterized by FT-IR, XRD, SEM-EDX, and TEM. The effects of main parameters that may influence the extraction process (i.e., pH, sorbent amount, time of extraction, eluting agent, and the presence concomitant ions) were investigated. The optimum extraction was achieved at pH 6, 50 mg of sorbent, 20-min shaking time, and 4.0 mL of 0.1 mol L^-1 thiourea as desorption agent. Under these conditions, the maximum adsorption capacity was 155.6 mg g^-1 with a preconcentration factor of 250 (for a 1000 mL sample solution). The calibration graph was linear up to 1000 μg L^-1 and the limit of detection was 1.75 μg L^-1. The precision (as relative standard deviation) was 2.53% (n = 10). The procedure was employed for the preconcentration of Pb²⁺ from blood and urine samples of bladder cancer patients before its determination by FAAS.

Synthesis of nitrogen-doped graphene quantum dots (N-GQDs) from marigold for detection of Fe3+ ion and bioimaging

Graphene quantum dots (GQDs) are synthesized by the method of high-temperature pyrolysis from marigold granules and subsequently nitrogen-doped graphene quantum dots (N-GQDs) are synthesized from ethylenediamine by hydrothermal treatment, which shows a strong blue emission with 7.84% quantum yield (QY). This will be used in detection of Fe³⁺ in water environments and the field of bioimaging.

Resonance light scattering sensor of the metal complex nanoparticles using diethyl dithiocarbamate doped graphene quantum dots for highly Pb(II)-sensitive detection in water sample

This study was aimed to detect Pb²⁺ using diethyl dithiocarbamate-doped graphene quantum dots (DDTC-GQDs) based pyrolysis of citric acid. The excitation maximum wavelength (λ_max, ex = 337 nm) of the DDTC-GQDs solution was blue shift from bare GQDs (λ_max, ex = 365 nm), with the same emission maximum wavelength (λ_max, em = 459 nm) indicating differences in the desired N, S matrices decorating in the nanoparticles. Their resonance light scattering intensities were peaked at the same λ_max, ex/em = 551/553 nm without any background effect of both ionic strength and masking agent. Under optimal conditions, the linear range was 1.0-10.0 μg L^-1 (R² = 0.9899), limit of detection was 0.8 μg L^-1 and limit of quantification was 1.5 μg L^-1. The precision, expressed as the relative standard deviations, for intra-day and inter-day analyses was 0.87% and 4.47%, respectively. The recovery study of Pb²⁺ for real water samples was ranged between 80.8% and 109.5%. The proposed method was also proved with certified water sample containing 60 μg L^-1 Pb²⁺ giving an excellent accuracy and was then implied satisfactorily for ultra-trace determination of Pb²⁺ in drinking water and tap water samples.

Co3O4/NiO@GQD@SO3H nanocomposite as a superior catalyst for the synthesis of chromenpyrimidines

A three-component reaction involving aromatic aldehydes, 6-amino-1,3-dimethyluracil and 4-hydroxycoumarin was achieved in the presence of the Co₃O₄/NiO@GQD@SO₃H nanocomposite as a highly effective heterogeneous catalyst to produce chromenpyrimidines. The catalyst was characterized via FT-IR, SEM, XRD, EDS, TGA, BET and VSM. This new catalyst was demonstrated to be highly effective in the preparation of chromenpyrimidines. Atom economy, low catalyst loading, reusable catalyst, applicability to a wide range of substrates and high product yields are some of the important features of this protocol.

A flexible and highly efficient protocol for the synthesis of chromenpyrimidines using the Co₃O₄/NiO@GQD@SO₃H nanocomposite has been developed.

Core-shell Fe3O4 polydopamine nanoparticles as sorbent for magnetic dispersive solid-phase extraction of copper from food samples

In the present study, core-shell Fe₃O₄ polydopamine nanoparticles were synthesized and used for the first time as an adsorbent for the vortex assisted magnetic dispersive solid phase extraction of copper from food samples. After elution, copper in the solutions was determined by FAAS. The adsorbent was characterized using X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller surface area, and zeta potential measurements. Various parameters affecting the magnetic dispersive solid-phase extraction were evaluated. The optimum pH and magnetic adsorbent amount were found to be 5 and 40 mg, respectively. Elution was made by 3 mL of 2 mol L^-1 HNO₃.The major advantage of the method is the fast equilibration during adsorption without the need for vortexing or shaking. The preconcentration factor and detection limit of the method were found to be 150 and 0.22 mg L^-1, respectively. The precision (as RSD%) and adsorption capacity of the method were 3.7% and 28 mg g^-1, respectively. The method was successfully verified by analyzing four certified reference materials (SPS-WW1 Batch 114 Wastewater, TMDA-53.3 Lake water, BCR-482 Lichen and 1573a Tomato Leaves) and by addition/recovery tests of copper standard solution in organic baby food, muesli, macaroni, honey, and milk samples.

A hybrid monolithic column based on layered double hydroxide-alginate hydrogel for selective solid phase extraction of lead ions in food and water samples

In order to develop an accurate and precise determination method based on solid phase extraction of Pb(II) in food and water samples, a hybrid monolithic column based on layered double hydroxides (LDHs) nanosheets-alginate hydrogel has been synthesized. Combining the advantages of porous 3D framework of hydrogel with selective adsorption of LDHs toward Pb(II), the hydrogel-based hybrid monolithic column shows enhanced enrichment selectivity and efficiency for target ions. Effects of hydrogel composition, pH, concentration and type of eluent, sample volume, and interfering ions on the recoveries of the analytes were also investigated. Under the optimal experiment conditions of method, the limit of detection, preconcentration factor and precision as RSD% are found to be 0.39 μg L^-1, 53.7 and 2.65%, respectively. Trace Pb(II) can be quantitatively preconcentrated at pH 6.0 with recoveries >97%. Finally, the method was successfully verified by analyzing spiked Pb²⁺ in water and drinking samples.

Metal–organic framework based micro solid phase extraction coupled with supramolecular solvent microextraction to determine copper in water and food samples

D-μ-SPE-SUPRAS-ME followed by GFAAS was successfully used for preconcentration and determination of copper in real samples.

A fluorescence switching sensor based on graphene quantum dots decorated with Hg2+ and hydrolyzed thioacetamide for highly Ag+-sensitive and selective detection

A fluorescent sensor based on graphene quantum dots (GQDs) was developed for the determination of silver ions (Ag⁺).