Matrix-effect free multi-residue analysis of veterinary drugs in food samples of animal origin by nanoflow liquid chromatography high resolution mass spectrometry

Salting-out assisted liquid-liquid extraction for the simple and rapid determination of veterinary antibiotic residues in aquatic products by HPLC-MS/MS

Based on salting-out assisted liquid-liquid extraction (SALLE) and high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS), a simple, rapid pretreatment without complex clean-up for the determination of 22 veterinary drug residues in aquatic products was developed and validated. In order to improve the efficiency of the method, the key procedural parameters of SALLE were fabricated. Na2EDTA-Mcllvaine buffer/ACN was used as the extraction solvent, anhydrous MgSO4 and NaCl as the extraction salts. The relationship between extraction efficiency and logD was initially evaluated during the optimization process. This study was well validated in various aquatic samples such as bass, large yellow croaker, carp, and shrimp, the limits of detection (LOD) and accuracy for all compounds ranged from 0.5 to 1.0 μg/kg, 71.4% to 120%. This method has the advantages of rapidity, simplicity, low cost, and high efficiency, and has broad potential for risk monitoring and evaluation of veterinary antibiotics in aquatic products.

A comparison of the determination of multiple pesticide residues in fruits, vegetables, and edible fungi using gas chromatography combined with filtration purification and solid-phase extraction

The multiplug filtration clean-up (m-PFC) and solid-phase extraction (SPE) pretreatment methods were employed to process 8 representative matrices in fruits, vegetables, and edible fungi, respectively. 37 pesticide residues were determined using gas chromatography equipped with ECD and FPD detectors. The measurement data were compared and analyzed following m-PFC purification and gas chromatography analysis, and both accuracy and precision met the (EU) 2021/808 requirements, achieving recovery rates for the 8 matrices ranging from 67.0% to 112.8% (averaging over 83.8% recovery), and RSDs between 0.2% and 15.2%. The 37 pesticides exhibited good linearity between 0.05 and 1.6 μg mL-1, and the matrix effect was found to be weaker compared to that of the Florisil solid-phase extraction method. The detection limits ranged from 0.0001 to 0.03 μg kg-1, with 31 pesticides showing lower detection limits compared to the SPE method. The application of this method to 150 real samples resulted in the detection of 17 pesticides across all samples. Fewer pigments were detected in m-PFC purified solutions compared to Florisil PR SPE when analyzed by liquid chromatography. m-PFC achieved more thorough adsorption of endogenous substances like pigments, reducing instrument contamination, utilizing less organic solvent, and simplifying the operation. This purification step offers clear advantages, allowing for the processing of larger sample batches in a short time. It can serve as a replacement for SPE methods like Florisi PR in batch detection of fruit and vegetable samples.

Sensitive immunoenzyme assay for the detection of antibiotic flumequine in honey

Fluoroquinolone antibiotics are used to cure and protect bees and apiaries from infections. Consequently, they may contaminate honey and other products of beekeeping. In this study, a highly sensitive immunoenzyme assay (EIA) was for the first time developed for the determination of a fluoroquinolone flumequine (FLU) in honey. The EIA was carried out in an indirect competitive format with colorimetric detection. The analysis was characterized by a low limit of detection of 30 pg mL-1. The polyclonal antibodies used showed no cross-reactivity with 24 other (fluoro)quinolones; the assay was highly specific only toward FLU. Different coating FLU-protein conjugates were tested to achieve the most sensitive competitive immunodetection. A highly simplified and rapid (3-5 min) sample preparation was proposed based on the 100-300 times dilution of honey by a buffer. The developed EIA has been tested to detect FLU in honey of different origins, namely acacia, flower, buckwheat, chestnut, and linden honey. It has been demonstrated that 76.2-115.9% of FLU could be determined by the assay. The versatility, simplicity, and rapidity of the EIA enable us to propose this method as an effective tool to control the contamination of honey.

Rapid multi-residue LC-MS/MS determination of nitrofuran metabolites, nitroimidazoles, amphenicols, and quinolones in honey with ultrasonic-assisted derivatization - magnetic solid-phase extraction

A rapid multi-residue LC-MS/MS method for the identification and determination of banned veterinary drugs in honey was developed. A total of 31 investigated veterinary drugs belonging to 4 classes including nitrofurans metabolites, nitroimidazoles, amphenicols, and quinolones were quantified by LC-MS/MS with ESI using one single injection. The sample preparation included treatment with 5-nitro-2-furaldehyde (5-NFA) in a thermostated ultrasonic bath (80 °C, 0.5М НСl, 20 min) to liberate matrix-bound residues of nitrofurans. Magnetic hypercrosslinked polystyrene (HCP/Fe3O4) was proposed for the solid-phase extraction and clean-up of target analytes prior to LC-MS/MS analysis. To evaluate and validate the performance of method, the criteria of the Decision (EC) no 2002/657 were applied. The LOQs of the examined analytes range from 0.3 to 1 μg kg-1, which indicates good sensitivity to quantify the target compounds in honey. The recoveries of veterinary drugs from 1 g of honey with 50 mg of the sorbent are 97-109% for nitrofuran metabolites, 84-115% for nitroimidazoles, 86-103% for amphenicols, and 97-118% for quinolones. The relative standard deviations of intra-day and inter-day precision analyses (RSD) are less than 16%. This methodology was applied to real honey samples and trace levels of some veterinary drugs were detected.

Multi-excitation wavelength of gold nanocluster-based fluorescence sensor array for sulfonamides discrimination

Sulfonamides (SAs) are widely used in many fields because of their advantages, including low price, wide antibacterial spectrum, and high stability. However, their accumulation in the human body leads to a variety of serious diseases. Therefore, it is necessary to design a convenient, effective, and sensitive method to detect SAs. Moreover, the fluorescence excitation spectrum has rich information characteristics, especially for the interaction between fluorophore and quencher via various mechanisms. However, the excitation wavelength-guided sensor array construction does not draw proper attention. To address these issues, we used BSA-AuNCs as a single probe to construct a sensor array for the detection of five SAs. The selected SAs showed different quenching effects on the fluorescence intensities of BSA-AuNCs. The changes in the fluorescence intensity at different excitation wavelengths (λ = 230, 250, and 280 nm) have been applied to construct our sensor array and address the distinguishability between the selected SAs. With helping of pattern recognition methods, five different SAs have been identified at three different concentrations. Additionally, qualitative analysis at different moral ratios and quantitative analysis at nanogram concentrations have been considered. Moreover, the proposed sensor array was successfully used to distinguish between different SAs in commercial milk with an accuracy of 100 %. This study provides a simple and powerful approach to SAs detection. Also, it shows a broad application prospect in the field of food and drug monitoring.

Evaluation the food safety of cultured fat via detection of residues of adipogenic differentiation cocktail in cultured fat with high performance liquid chromatography and enzyme-linked immunosorbent assay

Cultured fat is inducing adipose progenitor cells (APCs) to differentiate into mature adipocytes for consumption. The traditional adipogenic differentiation cocktail, including insulin, dexamethasone, indomethacin, isobutylmethylxanthine and rosiglitazone, has potential food safety problems in cultured fat. Therefore, the detection of these residues is necessary to ensure food safety. In this research, a method of high performance liquid chromatography (HPLC) was established to quantitatively analyze the potential residual content of dexamethasone, indomethacin, isobutylmethylxanthine and rosiglitazone in cultured fat and medium. Quantitative analysis showed that the content of four residues in cultured fat decreased to zero on Day 10. Subsequently, enzyme-linked immunosorbent assay (ELISA) was performed to detect the insulin content in the cultured fat and found that the insulin content in the cultured fat on Day 10 was 2.78 ± 0.21 μg/kg. After soaking with phosphate buffered saline (PBS), the insulin content decreased to 1.88 ± 0.54 μg/kg. In conclusion, this research provided an effective approach to clarify the content of potential residual components in cultured fat and it will provide reference for the safety of cultured fat in the future.

The application of rapid test paper technology for pesticide detection in horticulture crops: a comprehensive review

Background

The ever increasing pests and diseases occurring during vegetable crop production is a challenge for agronomists and farmers. One of the practices to avoid or control the attack of the causal agents is the use of pesticides, including herbicides, insecticides nematicides, and molluscicides. However, the use of these products can result in the presence of harmful residues in horticultural crops, which cause several human diseases such as weakened immunity, splenomegaly, renal failure, hepatitis, respiratory diseases, and cancer. Therefore, it was necessary to find safe and effective techniques to detect these residues in horticultural crops and to monitor food security.

Main body

The review discusses the use of conventional methods to detect pesticide residues on horticultural crops, explain the sensitivity of nanoparticle markers to detect a variety of pesticides, discuss the different methods of rapid test paper technology and highlight recent research on rapid test paper detection of pesticides.

Conclusions

The methodologies discussed in the current review can be used in a certain situation, and the variety of methods enable detection of different types of pesticides in the environment. Notably, the highly sensitive immunoassay, which offers the advantages of being low cost, highly specific and sensitive, allows it to be integrated into many detection fields to accurately detect pesticides.

Microfluidic fluorescent platform for rapid and visual detection of veterinary drugs

The overuse of veterinary drugs and veterinary drug residues is increasingly becoming an obstacle to sustainable development worldwide. It is therefore imperative to establish a quantitative, sensitive and efficient method for the detection of veterinary drugs. Herein, we developed a visual microfluidic detection platform for rapid and sensitive detection of veterinary drugs using CdTe quantum dots (QDs) with three different ligands as the sensing units. Green-emissive 3-mercaptopropionic acid (MPA)-CdTe QDs, yellow-emissive thioglycolic acid (TGA)-CdTe QDs and orange-emissive N-acetyl-l-cysteine (NAC)-CdTe QDs were synthesized by a sulfhydryl aqueous phase method. These CdTe QDs show selective rapid fluorescence response to pefloxacin (PEF), malachite green (MG), and 1-aminohydantoin hydrochloride (AHD). With the concentration of veterinary drugs increasing, the CdTe QDs reveals a fluorescence color variation from bright to dark until quenched and the response degree of CdTe QDs with different ligands to veterinary drugs is different. Specifically, the limits of detection (LODs) of MPA-CdTe, TGA-CdTe and NAC-CdTe QDs probes for PEF were 7.57 μM, 1.75 μM and 2.90 μM, respectively, and the response was complete in a few seconds, realizing the sensitive and rapid detection of PEF. The three kinds of CdTe QDs could also be used in the detection of other veterinary drugs such as MG and AHD. Finally, a microfluidic detection platform was constructed for visual sensing and rapid detection towards veterinary drugs. The sensor platform holds the advantages of simple operation, low cost, rapid sensing and good sensitivity, and is potentially useful for visual quantitative detection of veterinary drug residues in aquatic products and the environment.

Stable Isotope Labeling by Carbon-13 in Bacteria Culture for the Analysis of Residual Avermectin Using Stable Isotope Dilution Liquid Chromatography Tandem Mass Spectrometry

This study describes the development of a new stable isotope labeling method by carbon-13 in bacteria culture (SILCB) for the analysis of residual antibiotics via liquid chromatography with tandem mass spectrometry (LC-MS/MS). Stable isotope dilution (SID) LC-MS/MS with QuEChERS was employed to determine avermectin, particularly avermectin B1a (AV-a) and B1b (AV-b), based on completely ¹³C-labeled internal standards (¹³C-ISs) obtained from the SILCB. Our SILCB was developed from an optimal inorganic medium using ¹³C₆-glucose for Streptomyces avermitilis (14893 strain). A rough extract containing ¹³C-ISs was purified via high-speed countercurrent chromatography with a volatile two-phase solvent system composed of n-hexane/ethyl acetate/methanol/0.5% formic acid in water (7/3/5/5/, V/V). The purified ¹³C-ISs were evaluated to confirm the presence of completely ¹³C-labeled ions with m/z 938 > 326 and m/z 923 > 309 for AV-a and AV-b, respectively. The QuEChERS approach with the ¹³C-ISs procedure achieved acceptable recovery rates in beef meat samples of 99.5 - 100.0% (RSD < 2.0%, n = 6). For the analysis of residual antibiotics in foodstuffs by SID-LC-MS/MS and QuEChERS, the SILCB represents a significant improvement over previous methods suffering from cumbersome sample preparation and matrix effects.

A multi-family offline SPE LC-MS/MS analytical method for anionic, cationic and non-ionic surfactants quantification in surface water

Of the large number of emerging pollutants discharged from wastewaters into surface waters, surfactants are among those with the highest concentrations. However, few monitoring in river waters of these substances have already been performed and only on a few families, mostly anionic. This work aimed to develop a multi-family analytical strategy suitable for the quantification of low concentrations of surfactant in surface waters. Twelve families of surfactants, anionic, cationic and non-ionic were selected. Their quantification by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) and their extraction by SPE were optimized by comparing different retention mechanisms. The best performances were obtained with a C18 grafted silica LC column and a hydrophilic-lipophilic balanced (HLB) polymeric SPE cartridge. The final analytical method was validated and applied for the quantification of surfactants in 36 river water samples. Method limits of quantification (LQ), intra and inter days precision and trueness were evaluated. With LQ between 15 and 485 ng/L, and trueness over 80%, this method was suitable for monitoring surfactants in surface water. Application on French river water samples revealed the presence of anionic, cationic and non-ionic surfactants with median concentrations from 24 ng/L for octylphenol ethoxylates (OPEO), up to 4.6 μg/L regarding linear alkylbenzene sulfonates (LAS).

Recent Applications of Nano-Liquid Chromatography in Food Safety and Environmental Monitoring: A Review

In recent years, a trend toward instrument miniaturization has led to the development of new and sophisticated analytical systems, such as nano-liquid chromatography (nano-LC), which has enabled improvements of sensitivity, as well as chromatographic resolution. The growing interest in nano-LC methodology has resulted in a variety of innovative and promising applications. In this article, we review the applications of nano-LC separation methods coupled with mass spectrometry in the analysis of food and environmental samples. An assessment of sample preparation methods and analytical performance are provided, along with comparison to other, more established analytical techniques. Three main groups of compounds that are crucial for food safety assessment are considered in this review: pharmaceuticals (including antibiotics), pesticides, and mycotoxins. Recent practical applications of the nano-LC method in the determination of these compounds are discussed. Furthermore, we also focus on methods for the determination of various environmental contaminants using nano-LC methods. Future perspectives for the development of nano-LC methods are discussed.

Suitability of High-Resolution Mass Spectrometry for Routine Analysis of Small Molecules in Food, Feed and Water for Safety and Authenticity Purposes: A Review

During the last decade, food, feed and environmental analysis using high-resolution mass spectrometry became increasingly popular. Recent accessibility and technological improvements of this system make it a potential tool for routine laboratory work. However, this kind of instrument is still often considered a research tool. The wide range of potential contaminants and residues that must be monitored, including pesticides, veterinary drugs and natural toxins, is steadily increasing. Thanks to full-scan analysis and the theoretically unlimited number of compounds that can be screened in a single analysis, high-resolution mass spectrometry is particularly well-suited for food, feed and water analysis. This review aims, through a series of relevant selected studies and developed methods dedicated to the different classes of contaminants and residues, to demonstrate that high-resolution mass spectrometry can reach detection levels in compliance with current legislation and is a versatile and appropriate tool for routine testing.

Technical Overview of Orbitrap High Resolution Mass Spectrometry and Its Application to the Detection of Small Molecules in Food (Update Since 2012)

Food safety and quality issues are becoming increasingly important and attract much attention, requiring the development of better analytical platforms. For example, high-resolution (especially Orbitrap) mass spectrometry simultaneously offers versatile functions such as targeted/non-targeted screening while providing qualitative and quantitative information on an almost unlimited number of analytes to facilitate routine analysis and even allows for official surveillance in the food field. This review covers the current state of Orbitrap mass spectrometry (OMS) usage in food analysis based on research reported in 2012-2019, particularly highlighting the technical aspects of OMS application and the achievement of OMS-based screening and quantitative analysis in the food field. The gained insights enhance our understanding of state-of-the-art high-resolution mass spectrometry and highlight the challenges and directions of future research.

Rapid Multi-Residue Detection Methods for Pesticides and Veterinary Drugs

The excessive use or abuse of pesticides and veterinary drugs leads to residues in food, which can threaten human health. Therefore, there is an extremely urgent need for multi-analyte analysis techniques for the detection of pesticide and veterinary drug residues, which can be applied as screening techniques for food safety monitoring and detection. Recent developments related to rapid multi-residue detection methods for pesticide and veterinary drug residues are reviewed herein. Methods based on different recognition elements or the inherent characteristics of pesticides and veterinary drugs are described in detail. The preparation and application of three broadly specific recognition elements-antibodies, aptamers, and molecular imprinted polymers-are summarized. Furthermore, enzymatic inhibition-based sensors, near-infrared spectroscopy, and SERS spectroscopy based on the inherent characteristics are also discussed. The aim of this review is to provide a useful reference for the further development of rapid multi-analyte analysis of pesticide and veterinary drug residues.

Miniaturized liquid chromatography applied to the analysis of residues and contaminants in food: A review

The humankind is pretty dependent on food to control several biological processes into the organism. As the world population increases, the demand for foodstuffs follows the same trend claiming for a high food production situation. For this reason, a substantial amount of chemicals is used in agriculture and livestock husbandries every year, enhancing the likelihood of contaminated foodstuffs being commercialized. This outlook becomes a public health concern; thus, the governmental regulatory agencies impose laws to control the residues and contaminants in food matrices. Currently, one of the most important analytical techniques to perform it is LC. Despite its already recognized effectiveness, it is often time consuming and requires significant volumes of reagents, which are transformed into toxic waste. In this context, miniaturized LC modes emerge as a greener and more effective analytical technique. They have remarkable advantages, including higher sensitivity, lower sample amount, solvent and stationary phase requirements, and more natural coupling to MS. In this review, most of the critical characteristics of them are discussed, focusing on the benchtop instruments and their related analytical columns. Additionally, a discussion regarding the last 10 years of publications reporting miniaturized LC application for the analysis of natural and industrial food samples is categorized. The main chemical classes as applied in the crops are highlighted, including pesticides, veterinary drugs, and mycotoxins.

Rapid and high-throughput screening of multi-residue pharmaceutical drugs in bovine tissue using solid phase microextraction and direct analysis in real time-tandem mass spectrometry (SPME-DART-MS/MS)

Direct Analysis in Real Time (DART) has become a popular research area in food safety monitoring due to its unique characteristics that allow rapid and high-throughput screening of complex matrices with minimal sample preparation. The current research aimed to investigate the detection and quantitation capabilities of solid phase microextraction (SPME) and DART coupled to tandem mass spectrometry MS/MS for a large number of pharmaceutical drugs covering a wide range of physico-chemical properties (log P, -1.22-5.97) in complex animal-food matrices such as beef tissue. 53% of the 98 target analytes selected initially could be efficiently ionized by DART and quantified at or below the Canadian maximum residue limits (MRLs) and US regulatory tolerances in bovine muscle. Despite using only two internal standards for correction, promising results were obtained for these analytes, where 62% of the detected analytes achieved linear correlation coefficients >0.99 within the evaluated range of concentrations (0.25-3X, where X corresponds to the MRL for each target analyte). In addition, more than 92% of the detected analytes achieved average accuracies within the 70-120% range of their true concentrations and intraday repeatability RSDs ≤25% at the 0.5X, 1X, and 2X concentration levels. The fully automated sample preparation workflow allowed for total extraction and analysis times as short as 1 min time per sample. While DART has limited capabilities in terms of analyte coverage, this research highlights the potential usefulness of SPME-DART-MS/MS as a method for rapid analysis in food safety monitoring applications.

Optimization of Coated Blade Spray for Rapid Screening and Quantitation of 105 Veterinary Drugs in Biological Tissue Samples

Rapid and efficient determination of contaminants at trace levels in tissue samples has become an unmet need around the globe. Coated blade spray (CBS) extraction/ionization is a technology capable of performing, with a single device, enrichment of analytes present in complex matrices, as well as the direct interface and introduction of said analytes into the mass spectrometer via electrospray ionization. To facilitate the challenging rapid tissue screening, we describe for the first time the use of a very thin layer of biocompatible polyacrylonitrile as a CBS device undercoating to make metal surface biocompatible. This add-on is meant to protect the portion of the uncoated stainless-steel of the blade that is normally exposed to the matrix, consequently becoming susceptible to adhesion of matrix macromolecules, cells, and fat. In addition, we present for the first time the use of CBS in negative ionization mode for quantitative purposes. The optimized CBS workflow allows for rapid and high-throughput screening and quantitation of 105 veterinary drugs in homogenized bovine tissue in both negative and positive ionization mode in one single run using a single CBS device with analysis times as short as 1 min per sample when 96 extractions are simultaneously conducted. While only two internal standards were used for correction, one per ionization mode, excellent accuracy and precision were achieved, with more than 90% of analytes falling within the 70-120% range of their true concentrations and yielding RSD ≤ 25% at three validation levels. The majority of analytes achieved linear correlation coefficients >0.99, and all 105 analytes were able to meet both Canadian and U.S. regulatory levels.

Comparison of Solid-Phase Microextraction to Solvent Extraction and QuEChERS for Quantitative Analysis of Veterinary Drug Residues in Chicken and Beef Matrices

A fully automated high-throughput method using solid-phase microextraction (SPME) was developed and validated for quantitative analysis of more than 100 veterinary drugs in chicken and beef tissue. The work also encompassed a comparison of the SPME method to two well-documented sample preparation procedures, solvent extraction (SE) and quick, easy, cheap, effective, rugged, and safe (QuEChERS). SPME showed considerably less matrix effects, with only two compounds showing significant matrix effects in comparison to 30% of analytes in QuEChERS and 42% in SE in beef tissue. Excellent accuracy and precision results were achieved with all methods in the chicken matrix, with more than 91% of analytes falling within the 70-120% range of their true concentrations and relative standard deviation of ≤25% at 0.75X and 1.5X, where X is the maximum residue level. Similar results were achieved in beef tissue. All methods were able to meet regulatory limit of quantitation levels for the majority of target analytes.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.

Synthesis of DABCO-based ionic liquid functionalized magnetic nanoparticles as a novel sorbent for the determination of cephalosporins in milk samples by dispersive solid-phase extraction followed by ultra-performance liquid chromatography-tandem mass spectrometry

In this study, DABCO-based ionic liquid-functionalized magnetic iron oxide nanoparticles were synthesized for the first time by the quaternization reaction with 1-(2,3-dihydroxypropyl)-1,4-diazabicyclo[2.2.2]octanylium chloride and chloro-functionalized Fe₃O₄ nanoparticles.

Screening of multi-class antibiotics in pork meat by LC-Orbitrap-MS with modified QuEChERS extraction

The quantification capability of high resolution mass spectrometry is of great interest to analysts. We described a method for analysis of multi-class antibiotics in pork meat by UPLC-quadrupole (Q)-Orbitrap-MS. The QuEChERS approach with a clean-up step using a sorbent of primary-secondary amine (PSA) and C18 was adopted for sample preparation, and 37 antibiotics including beta-lactams, tetracyclines, sulfonamides, fluoroquinolones and macrolides were analyzed. The Q-Orbitrap method showed high sensitivity with limits of detection (LODs) ranging from 0.8 μg kg⁻¹ to 2.9 μg kg⁻¹. The method was further validated by intra and inter-day tests with fortified samples. Recovery (85–105.6%) and precision values (RSDs < 15%) for all analytes were obtained. The result indicates that UPLC-Q-Orbitrap-MS coupled with QuEChERS preparation can serve as a routine method for multi-class antibiotic analysis in pork meat.

The quantification capability of high resolution mass spectrometry is of great interest to analysts.