Enhanced fish oil-in-water emulsions enabled by rapeseed lecithins obtained under different processing conditions

Plant-Based Oil-in-Water Food Emulsions: Exploring the Influence of Different Formulations on Their Physicochemical Properties

The global focus on incorporating natural ingredients into the diet for health improvement encompasses ω-3 polyunsaturated fatty acids (PUFAs) derived from plant sources, such as flaxseed oil. ω-3 PUFAs are susceptible to oxidation, but oil-in-water (O/W) emulsions can serve to protect PUFAs from this phenomenon. This study aimed to create O/W emulsions using flaxseed oil and either soy lecithin or Quillaja saponins, thickened with modified starch, while assessing their physical properties (oil droplet size, ζ-potential, and rheology) and physical stability. Emulsions with different oil concentrations (25% and 30% w/w) and oil-to-surfactant ratio (5:1 and 10:1) were fabricated using high-pressure homogenization (800 bar, five cycles). Moreover, emulsions were thickened with modified starch and their rheological properties were measured. The physical stability of all emulsions was assessed over a 7-day storage period using the TSI (Turbiscan Stability Index). Saponin-stabilized emulsions exhibited smaller droplet diameters (0.11-0.19 µm) compared to lecithin (0.40-1.30 µm), and an increase in surfactant concentration led to a reduction in droplet diameter. Both surfactants generated droplets with a high negative charge (-63 to -72 mV), but lecithin-stabilized emulsions showed greater negative charge, resulting in more intense electrostatic repulsion. Saponin-stabilized emulsions showed higher apparent viscosity (3.9-11.6 mPa·s) when compared to lecithin-stabilized ones (1.19-4.36 mPa·s). The addition of starch significantly increased the apparent viscosity of saponin-stabilized emulsions, rising from 11.6 mPa s to 2117 mPa s. Emulsions stabilized by saponin exhibited higher stability than those stabilized by lecithin. This study confirms that plant-based ingredients, particularly saponins and lecithin, effectively produce stable O/W emulsions with flaxseed oil, offering opportunities for creating natural ingredient-based food emulsions.

Runoff of foliar-applied natural fungicides in aquaponics: Implications for fish and nitrification

Aquaponics is a method of producing food in a sustainable manner through the integration of aquaculture and hydroponics, which allows simultaneous cultivation of fish and economic crops. The use of natural fungicides are crucial to the sustainable control of diseases in aquaponics. We assessed the potential impacts of natural fungicides, such as clove oil and lecithin, as well as a synthetic fungicide, tebuconazole, following foliar application in aquaponics. This study examined the runoff rates of the fungicides in decoupled aquaponics, and the subsequent effects of the runoffs on nitrification processes and Nile tilapia (Oreochromis niloticus). The runoffs of the foliar-applied fungicides, clove oil, lecithin, and tebuconazole, were detected in aquaponics water at a percentage runoff rate of 0.3 %, 2.3 %, and 0.3-0.8 % respectively. In the biofilter, lecithin altered the ammonium levels by increasing ammonium-nitrogen levels by 7 mg L-1, 6 h post application. Clove oil, on the other hand, showed no significant effect on ammonium, nitrite, and nitrate-nitrogen. Similarly, the toxicity test showed that eugenol had no significant effects on the hematological, biochemical and antioxidative activities of O. niloticus. Conversely, tebuconazole exhibited significant and persistent effects on various biochemical parameters, including lactate, albumin, and total protein, as well as hematological parameters like hemoglobin and MCH. The use of lecithin and tebuconazole should only be limited to decoupled aquaponics.

Fabrication of oil-in-water emulsions as shelf-stable liquid non-dairy creamers: effects of homogenization pressure, oil type, and emulsifier concentration

BACKGROUND

The popularity of coffee, the second most consumed beverage in the world, contributes to the high demand for liquid non-dairy creamer (LNDC). In this study, palm olein emulsions (as LNDCs) were investigated as alternatives to the more common soybean oil-based LNDCs. LNDCs were prepared via different homogenization pressures (100-300 bar) using different types of oil (palm olein and soybean oil) and concentrations of DATEM emulsifier (5-20 g kg^-1 ).

RESULTS

Increases in homogenization pressure and emulsifier concentration were observed to have significant (P < 0.05) effects on the physicochemical properties (particle size, pH, and viscosity) of the LNDCs. Palm olein and soybean oil LNDCs prepared using 15 g kg^-1 and 10 g kg^-1 DATEM emulsifier, respectively, were determined to be the most stable (as observed throughout a 15-day storage period at ambient temperature of 28 ± 2 °C), with properties closest to those of a commercial LNDC. When added to black coffee, both LNDCs displayed a good whitening effect by increasing the L* value from 26.73 ± 0.16 (black coffee) to ≥40.82 ± 0.56 (black coffee + LNDCs). Sensory evaluation showed that there were no significant (P > 0.05) differences between the prepared and commercial LNDCs in terms of their color, appearance, and overall acceptability.

CONCLUSION

Shelf-stable LNDCs with qualities comparable to commercial LNDC were successfully fabricated. Valuable insights into the effects of homogenization pressure, oil type, and emulsifier concentration, as well as functionality and consumer acceptance of the LNDCs when added into black coffee, were obtained. © 2020 Society of Chemical Industry.

Effects of partial hydrolysis on the structural, functional and antioxidant properties of oat protein isolate

The degree of hydrolysis (DH) plays important roles in the characteristics of food proteins. Herein, in order to explore the effects of partial hydrolysis on the structural, functional and antioxidant characteristics of hydrolysates, oat protein isolate was partially hydrolyzed with alcalase at different DHs (2%, 4%, 6%, 8%, 12%, and 16%). Our results showed that hydrolysis could induce significant structural changes in oat protein, mainly reflecting at the amino acid pattern, molecular weight profile and protein conformation. Alcalase hydrolysis also resulted in hydrolysates with the emulsifying activity index of at least 19.83 m2 g-1, and the highest emulsion stability was observed in the hydrolysate with a DH of 6%, possibly due to its suitable molecular weight, exposed hydrophobic amino acid residues and high surface net charge. Besides, all hydrolysates exerted excellent DPPH radical scavenging activity with an IC50 value ranging from 19.23 to 30.32 μg mL-1, which was closely correlated with DH. The oat protein isolate with moderate alcalase hydrolysis (DH 6%) exhibited the strongest metal ion-chelating activity and possessed the maximum amount of hydrophilic amino acids. More importantly, the oat protein hydrolysate with a DH of 6% not only prolonged the induction period of sunflower oil, but also improved the stability of the sunflower oil-in-water emulsion, as evidenced by the reduced TBARS production and the homogeneous droplet size. Therefore, partial hydrolysis can be advantageous for improving the functional and antioxidant characteristics of oat protein isolate, particularly the hydrolysate with a DH of 6%.

Vegetable lecithins: A review of their compositional diversity, impact on lipid metabolism and potential in cardiometabolic disease prevention

Vegetable lecithins, widely used in the food industry as emulsifiers, are a mixture of naturally occurring lipids containing more than 50% of phospholipids (PL). PL exert numerous important physiological effects. Their amphiphilic nature notably enables them to stabilise endogenous lipid droplets, conferring them an important role in lipoprotein transport, functionality and metabolism. In addition, beneficial effects of dietary lecithin on metabolic disorders have been reported since the 1990s. This review attempts to summarize the effects of various vegetable lecithins on lipid and lipoprotein metabolism, as well as their potential application in the treatment of dyslipidemia associated with metabolic disorders. Despite controversial data concerning the impact of vegetable lecithins on lipid digestion and intestinal absorption, the beneficial effect of lecithin supplementation on plasma and hepatic lipoprotein and cholesterol levels is unequivocal. This is especially true in hyperlipidemic patients. Furthermore, the immense compositional diversity of vegetable lecithins endows them with a vast range of biochemical and biological properties, which remain to be explored in detail. Data on the effects of vegetable lecithins alternative to soybean, both as supplements and as ingredients in different foods, is undoubtedly lacking. Given the exponential demand for vegetable products alternative to those of animal origin, it is of primordial importance that future research is undertaken in order to elucidate the mechanisms by which individual fatty acids and PL from various vegetable lecithins modulate lipid metabolism. The extent to which they may influence parameters associated with metabolic disorders, such as intestinal integrity, low-grade inflammation and gut microbiota must also be assessed.

Water-mediated catalyst-free synthesis of lysine-based ampholytic amphiphiles for multipurpose applications: Characterization and pH-responsive emulsifying properties

A novel series of lysine-based ampholytic amphiphiles, with alkylsuccinic anhydrides of varying chain lengths as hydrophobic acylating agents, were synthesized in medium to high yield (50.23-90.15%) based on a facile, catalyst-free method in water medium; and structurally confirmed by mass spectrometry (MS), Fourier transform infra-red (FTIR) spectroscopy, and ¹H/¹³C nuclear magnetic resonances (NMR) analysis. The resulting compounds were subjected to pH-dependent amphiphilic property, ferrous ion chelating, DPPH antioxidant capacity, and cytotoxicity analyses. Results showed that CMC values decrease, γ value increase, and emulsion stability increase with the increase of medium pH, suggesting that the surface activity of synthetic compounds at air/water and oil/water interface under neutral and alkaline conditions was remarkably higher than that under acidic condition. Lauryl O-acylated malic lysine (compound 4b) presented excellent foaming ability close to commercial detergent sodium dodecyl sulphate; dodecyl succinic lysine (compound 4a) afforded highly stable o/w nanoemulsion. Moreover, compound 4b displayed comparable ferrous ion chelating property to lysine and 2,2-diphenyl-1-picrylhydrazyl (DPPH) antioxidative capacity similar to a commercial food ingredient, diacetyl tartaric acid esters of mono- and di-glycerides (DATEM), indicating its multi-faceted functionalities. A cytotoxicity study of compounds 3b &4b showed that they were non-toxic. Thus, these novel ampholytic amphiphiles may find multi-purpose applications in food, detergent, pharmaceutical, and cosmetic industry.

Aspartic-Acid-Based Ampholytic Amphiphiles: Synthesis, Characterization, and pH-Dependent Properties at Air/Water and Oil/Water Interfaces

A facile and two-step strategy was employed to synthesize a series of novel aspartic-acid-based ampholytic amphiphiles from sustainable and commercially viable substances as starting materials. The molecular structures of the synthetic compounds were well-identified by mass spectrometry and ¹H/¹³C nuclear magnetic resonance analysis, and the physicochemical, pH-dependent foaming, and emulsifying properties were evaluated by the use of multiple techniques, such as Fourier transform infrared spectroscopy, differential scanning calorimetry, Langmuir-Blodgett study, and fluorescence microscopy imaging. As a result of the co-existence of amino and carboxyl groups in the synthetic compounds, the compounds presented varying charges (cationic, ampholytic, and anionic) depending upon the pH of the medium compared to the dissociation constants (p K_a). Compounds with cationic (pH 1.0) and anionic (pH 9.0) forms had significantly higher γ_0.1 and critical micelle concentration values than those with ampholytic forms (pH 7.0). sn-1-Lauroyl- sn-3-aspartic acid (compound 3) at neutral and alkaline conditions displayed comparable foaming properties, including foaming, calcium-tolerant, and temperature-resistant abilities, with commercial sulfonate sodium dodecyl sulfate (SDS), and thus might be a promising alternative to SDS, applied in personal care products and detergent formula. sn-1-Palmtoyl- sn-3-aspartic acid (compound 5a) with an ampholytic structure was proven as the most excellent stabilizer for the preparation of oil-in-water emulsions compared to palmityl aspartic acid (compound 5b), commercial food ingredient diacetyltartaric acid esters of mono- and diglycerides, and glyceride monopalmitate at aqueous phase pH 7.0. Thus, it has promising use as a pH-dependent emulsifying agent in various fields.

Caffeoyl maleic fatty alcohol monoesters: Synthesis, characterization and antioxidant assessment

HYPOTHESIS

Caffeoyl malate anhydride, as a good nucleophilic acceptor, can react with lipophilic fatty alcohols to yield interface-confined amphiphiles. The resulting novel molecules are hypothesized to deliver combined functionalities of parent natural building blocks, as emulsifier, stabilizer, ion chelator and free radical scavenger.

EXPERIMENTS

Ring-opening reactions of caffeoyl malate anhydride with fatty alcohols of different chain lengths generated a new group of antioxidant amphiphiles. Structural verification was by MS (mass spectrometry), ¹H/¹³C NMR (nuclear magnetic resonance) and FT-IR (Fourier transform infra-red) spectroscopy. Physicochemical characterization was done by use of DSC (differential scanning calorimetry), FT-IR, determinations of critical micelle concentrations (CMC) and calculations of HLB. Antioxidant activity was assessed by DPPH (2, 2-diphenyl-1-picrylhydrazyl) and hydroxyl radical scavenging activities. Dynamic light scattering (DLS) studies demonstrated surface-activity of G8-G18. Inhibition of iron- and thermally-accelerated lipid oxidation was monitored by thiobarbituric acid reactive substances (TBARS) assay.

FINDINGS

Derivatization of caffeoyl malate anhydride with fatty alcohols maintained free radical scavenging activity, and improved hydroxyl radical scavenging activity of caffeic acid. Lipid oxidation at 22 °C was significantly inhibited (up to 3.5 times) in emulsions stabilized by G8-G18 with or without chitosan compared to emulsions stabilized by commercial emulsifiers and stabilizers. Thermal oxidation (at 80 °C) was 10 times less in emulsions facilitated by G8-G18 in combination with chitosan compared to emulsions stabilized by commercial emulsifiers and stabilizers. This study has developed a simple and straightforward approach for developing value-added compounds from underexplored fatty alcohols.