Early discrimination and growth tracking of Aspergillus spp. contamination in rice kernels using electronic nose

Distinguishing between Wheat Grains Infested by Four Fusarium Species by Measuring with a Low-Cost Electronic Nose

An electronic device based on the detection of volatile substances was developed in response to the need to distinguish between fungal infestations in food and was applied to wheat grains. The most common pathogens belong to the fungi of the genus Fusarium: F. avenaceum, F. langsethiae, F. poae, and F. sporotrichioides. The electronic nose prototype is a low-cost device based on commercially available TGS series sensors from Figaro Corp. Two types of gas sensors that respond to the perturbation are used to collect signals useful for discriminating between the samples under study. First, an electronic nose detects the transient response of the sensors to a change in operating conditions from clean air to the presence of the gas being measured. A simple gas chamber was used to create a sudden change in gas composition near the sensors. An inexpensive pneumatic system consisting of a pump and a carbon filter was used to supply the system with clean air. It was also used to clean the sensors between measurement cycles. The second function of the electronic nose is to detect the response of the sensor to temperature disturbances of the sensor heater in the presence of the gas to be measured. It has been shown that features extracted from the transient response of the sensor to perturbations by modulating the temperature of the sensor heater resulted in better classification performance than when the machine learning model was built from features extracted from the response of the sensor in the gas adsorption phase. By combining features from both phases of the sensor response, a further improvement in classification performance was achieved. The E-nose enabled the differentiation of F. poae from the other fungal species tested with excellent performance. The overall classification rate using the Support Vector Machine model reached 70 per cent between the four fungal categories tested.

Recent advances and challenges in the analysis of natural toxins

Natural toxins (NTs) are poisonous secondary metabolites produced by living organisms developed to ward off predators. Especially low molecular weight NTs (MW<∼1 kDa), such as mycotoxins, phycotoxins, and plant toxins, are considered an important and growing food safety concern. Therefore, accurate risk assessment of food and feed for the presence of NTs is crucial. Currently, the analysis of NTs is predominantly performed with targeted high pressure liquid chromatography tandem mass spectrometry (HPLC-MS/MS) methods. Although these methods are highly sensitive and accurate, they are relatively expensive and time-consuming, while unknown or unexpected NTs will be missed. To overcome this, novel on-site screening methods and non-targeted HPLC high resolution mass spectrometry (HRMS) methods have been developed. On-site screening methods can give non-specialists the possibility for broad "scanning" of potential geographical regions of interest, while also providing sensitive and specific analysis at the point-of-need. Non-targeted chromatography-HRMS methods can detect unexpected as well as unknown NTs and their metabolites in a lab-based approach. The aim of this chapter is to provide an insight in the recent advances, challenges, and perspectives in the field of NTs analysis both from the on-site and the laboratory perspective.

Methods for Estimating the Detection and Quantification Limits of Key Substances in Beer Maturation with Electronic Noses

To evaluate the suitability of an analytical instrument, essential figures of merit such as the limit of detection (LOD) and the limit of quantification (LOQ) can be employed. However, as the definitions k nown in the literature are mostly applicable to one signal per sample, estimating the LOD for substances with instruments yielding multidimensional results like electronic noses (eNoses) is still challenging. In this paper, we will compare and present different approaches to estimate the LOD for eNoses by employing commonly used multivariate data analysis and regression techniques, including principal component analysis (PCA), principal component regression (PCR), as well as partial least squares regression (PLSR). These methods could subsequently be used to assess the suitability of eNoses to help control and steer processes where volatiles are key process parameters. As a use case, we determined the LODs for key compounds involved in beer maturation, namely acetaldehyde, diacetyl, dimethyl sulfide, ethyl acetate, isobutanol, and 2-phenylethanol, and discussed the suitability of our eNose for that dertermination process. The results of the methods performed demonstrated differences of up to a factor of eight. For diacetyl, the LOD and the LOQ were sufficiently low to suggest potential for monitoring via eNose.

Analysis of Wheat Grain Infection by Fusarium Mycotoxin-Producing Fungi Using an Electronic Nose, GC-MS, and qPCR

Fusarium graminearum and F. culmorum are considered some of the most dangerous pathogens of plant diseases. They are also considerably dangerous to humans as they contaminate stored grain, causing a reduction in yield and deterioration in grain quality by producing mycotoxins. Detecting Fusarium fungi is possible using various diagnostic methods. In the manuscript, qPCR tests were used to determine the level of wheat grain spoilage by estimating the amount of DNA present. High-performance liquid chromatography was performed to determine the concentration of DON and ZEA mycotoxins produced by the fungi. GC-MS analysis was used to identify volatile organic components produced by two studied species of Fusarium. A custom-made, low-cost, electronic nose was used for measurements of three categories of samples, and Random Forests machine learning models were trained for classification between healthy and infected samples. A detection performance with recall in the range of 88-94%, precision in the range of 90-96%, and accuracy in the range of 85-93% was achieved for various models. Two methods of data collection during electronic nose measurements were tested and compared: sensor response to immersion in the odor and response to sensor temperature modulation. An improvement in the detection performance was achieved when the temperature modulation profile with short rectangular steps of heater voltage change was applied.

Challenges and applications of volatile organic compounds monitoring technology in plant disease diagnosis

Biotic and abiotic stresses are well known to increase the emission of volatile organic compounds (VOCs) from plants. The analysis of VOCs emissions from plants enables timely diagnostic of plant diseases, which is critical for prompting sustainable agriculture. Previous studies have predominantly focused on the utilization of commercially available devices, such as electronic noses, for diagnosing plant diseases. However, recent advancements in nanomaterials research have significantly contributed to the development of novel VOCs sensors featuring exceptional sensitivity and selectivity. This comprehensive review presents a systematic analysis of VOCs monitoring technologies for plant diseases diagnosis, providing insights into their distinct advantages and limitations. Special emphasis is placed on custom-made VOCs sensors, with detailed discussions on their design, working principles, and detection performance. It is noteworthy that the application of VOCs monitoring technologies in the diagnostic process of plant diseases is still in its emerging stage, and several critical challenges demand attention and improvement. Specifically, the identification of specific stress factors using a single VOC sensor remains a formidable task, while environmental factors like humidity can potentially interfere with sensor readings, leading to inaccuracies. Future advancements should primarily focus on addressing these challenges to enhance the overall efficacy and reliability of VOCs monitoring technologies in the field of plant disease diagnosis.

Determination of benzo(a)pyrene in peanut oil based on Raman spectroscopy and machine learning methods

Benzo(a)pyrene (BaP) generated in the production process of oil is harmful to human severely as a kind of carcinogenic substance. In this study, the qualitative and quantitative detection of BaP concentration in peanut oil was investigated based on Raman spectroscopy combined with machine learning methods. The glass substrates and magnetron sputtered gold substrates for the Raman spectra were compared and the data preprocessing methods of principal component analysis (PCA) and t-distributed stochastic neighbor embedding (t-SNE) were used to process Raman signal. Back propagation neural network (BPNN), partial least squares regression (PLSR), support vector machine (SVM) and random forest (RF) algorithms were developed to obtain the qualitative and quantitative detection model of BaP concentration in peanut oil. The results showed that the Raman spectra with the glass substrate was more suitable for the BaP detection than magnetron sputtered gold substrates. RF combined with t-SNE could achieve an accuracy of 97.5% in the qualitative detection of BaP concentration levels in model validation experiment, and the correlation coefficient of the prediction set (R_p) in the quantitative detection was 0.9932, the root mean square error (RMSEP) was 0.8323 μg/kg and the bias was 0.1316 μg/kg. It can be concluded that Raman spectroscopy combined with machine learning methods could provide an effective method for the rapid determination of BaP concentration in peanut oil.

Effect of the Consolidation Level on Organic Volatile Compound Emissions from Maize during Storage

The aim of this study was to determine the emission of organic volatile compounds from maize grain as a function of granularity and packing density of bulk material in conditions imitating processes occurring in silos. The study was carried out with the use of a gas chromatograph and an electronic nose, which was designed and constructed at the Institute of Agrophysics of PAS and has a matrix of eight MOS (metal oxide semiconductor) sensors. A 20-L volume of maize grain was consolidated in the INSTRON testing machine with pressures of 40 and 80 kPa. The control samples were not compacted, and the maize bed had bulk density. The analyses were carried out at a moisture content of 14% and 17% (w.b.-wet basis). The measurement system facilitated quantitative and qualitative analyses of volatile organic compounds and the intensity of their emission during 30-day storage. The study determined the profile of volatile compounds as a function of storage time and the grain bed consolidation level. The research results indicated the degree of grain degradation induced by the storage time. The highest emission of volatile compounds was recorded on the first four days, which indicated a dynamic nature of maize quality degradation. This was confirmed by the measurements performed with electrochemical sensors. In turn, the intensity of the volatile compound emission decreased in the next stage of the experiments, which showed a decline in the quality degradation dynamics. The sensor responses to the emission intensity decreased significantly at this stage. The electronic nose data on the emission of VOCs (volatile organic compounds) as well as grain moisture and bulk volume can be helpful for the determination of the quality of stored material and its suitability for consumption.

Improving Recognition Accuracy of Pesticides in Groundwater by Applying TrAdaBoost Transfer Learning Method

Accurate and rapid prediction of pesticides in groundwater is important to protect human health. Thus, an electronic nose was used to recognize pesticides in groundwater. However, the e-nose response signals for pesticides are different in groundwater samples from various regions, so a prediction model built on one region's samples might be ineffective when tested in another. Moreover, the establishment of a new prediction model requires a large number of sample data, which will cost too much resources and time. To resolve this issue, this study introduced the TrAdaBoost transfer learning method to recognize the pesticide in groundwater using the e-nose. The main work was divided into two steps: (1) qualitatively checking the pesticide type and (2) semi-quantitatively predicting the pesticide concentration. The support vector machine integrated with the TrAdaBoost was adopted to complete these two steps, and the recognition rate can be 19.3% and 22.2% higher than that of methods without transfer learning. These results demonstrated the potential of the TrAdaBoost based on support vector machine approaches in recognizing the pesticide in groundwater when there were few samples in the target domain.

A Bio-Inspired Spiking Neural Network with Few-Shot Class-Incremental Learning for Gas Recognition

The sensitivity and selectivity profiles of gas sensors are always changed by sensor drifting, sensor aging, and the surroundings (e.g., temperature and humidity changes), which lead to a serious decline in gas recognition accuracy or even invalidation. To address this issue, the practical solution is to retrain the network to maintain performance, leveraging its rapid, incremental online learning capacity. In this paper, we develop a bio-inspired spiking neural network (SNN) to recognize nine types of flammable and toxic gases, which supports few-shot class-incremental learning, and can be retrained quickly with a new gas at a low accuracy cost. Compared with gas recognition approaches such as support vector machine (SVM), k-nearest neighbor (KNN), principal component analysis (PCA) +SVM, PCA+KNN, and artificial neural network (ANN), our network achieves the highest accuracy of 98.75% in five-fold cross-validation for identifying nine types of gases, each with five different concentrations. In particular, the proposed network has a 5.09% higher accuracy than that of other gas recognition algorithms, which validates its robustness and effectiveness for real-life fire scenarios.

E-Nose Technology for Mycotoxin Detection in Feed: Ready for a Real Context in Field Application or Still an Emerging Technology?

Mycotoxin risk in the feed supply chain poses a concern to animal and human health, economy, and international trade of agri-food commodities. Mycotoxin contamination in feed and food is unavoidable and unpredictable. Therefore, monitoring and control are the critical points. Effective and rapid methods for mycotoxin detection, at the levels set by the regulations, are needed for an efficient mycotoxin management. This review provides an overview of the use of the electronic nose (e-nose) as an effective tool for rapid mycotoxin detection and management of the mycotoxin risk at feed business level. E-nose has a high discrimination accuracy between non-contaminated and single-mycotoxin-contaminated grain. However, the predictive accuracy of e-nose is still limited and unsuitable for in-field application, where mycotoxin co-contamination occurs. Further research needs to be focused on the sensor materials, data analysis, pattern recognition systems, and a better understanding of the needs of the feed industry for a safety and quality management of the feed supply chain. A universal e-nose for mycotoxin detection is not realistic; a unique e-nose must be designed for each specific application. Robust and suitable e-nose method and advancements in signal processing algorithms must be validated for specific needs.

Development of a Low-Cost Electronic Nose with an Open Sensor Chamber: Application to Detection of Ciboria batschiana

In the construction of electronic nose devices, two groups of measurement setups could be distinguished when we take into account the design of electronic nose chambers. The simpler one consists of placing the sensors directly in the environment of the measured gas, which has an important advantage, in that the composition of the gas is not changed as the gas is not diluted. However, that has an important drawback in that it is difficult to clean sensors between measurement cycles. The second, more advanced construction, contains a pneumatic system transporting the gas inside a specially designed sensor chamber. A new design of an electronic nose gas sensor chamber is proposed, which consists of a sensor chamber with a sliding chamber shutter, equipped with a simple pneumatic system for cleaning the air. The proposal combines the advantages of both approaches to the sensor chamber designs. The sensors can be effectively cleared by the flow of clean air, while the measurements are performed in the open state when the sensors are directly exposed to the measured gas. Airflow simulations were performed to confirm the efficiency of clean air transport used for sensors' cleaning. The demonstrated electronic nose applies eight Figaro Co. MOS TGS series sensors, in which a transient response caused by a change of the exposition to measured gas, and change of heater voltage, was collected. The new electronic nose was tested as applied to the differentiation between the samples of Ciboria batschiana fungi, which is one of the most harmful pathogens of stored acorns. The samples with various coverage, thus various concentrations of the studied odor, were measured. The tested device demonstrated low noise and a good level of repetition of the measurements, with stable results during several hours of repetitive measurements during an experiment lasting five consecutive days. The obtained data allowed complete differentiation between healthy and infected samples.

Quality Change in Camellia Oil during Intermittent Frying

Camellia oil with a high oleic acid content is widely used for frying. To comprehensively describe the quality change in camellia oil during frying, the changes in composition, deterioration indicators, and volatile profiles were investigated. The results showed that tocopherols mainly degraded in the early stage of frying, followed by unsaturated fatty acids (UFA). This caused the carbonyl value and total polar compounds level to significantly increase. Moreover, frying promoted the accumulation of volatile compounds in terms of type and abundance, especially aldehydes, which are related to the degradation of UFA. Principal component analysis showed that the frying of camellia oil was divided into three stages. First, the camellia oil with a heating time of 2.5-7.5 h showed excellent quality, where tocopherol played a major role in preventing the loss of UFA and was in the degradation acceleration stage. Subsequently, as tocopherol entered the degradation deceleration stage, the quality of camellia oil heated for 10.0-15.0 h presented a transition from good to deteriorated. Finally, tocopherol entered the degradation stagnation stage, and the quality of camellia oil heated for 17.5-25.0 h gradually deteriorated, accompanied by a high level of volatile compounds and deterioration indicators. Overall, this work comprehensively determined the deterioration of camellia oil during intermittent frying and offered valuable insights for its quality evaluation.

Applications of machine learning techniques for enhancing nondestructive food quality and safety detection

In considering the need of people all over the world for high-quality food, there has been a recent increase in interest in the role of nondestructive and rapid detection technologies in the food industry. Moreover, the analysis of data acquired by most nondestructive technologies is complex, time-consuming, and requires highly skilled operators. Meanwhile, the general applicability of various chemometric or statistical methods is affected by noise, sample, variability, and data complexity that vary under various testing conditions. Nowadays, machine learning (ML) techniques have a wide range of applications in the food industry, especially in nondestructive technology and equipment intelligence, due to their powerful ability in handling irrelevant information, extracting feature variables, and building calibration models. The review provides an introduction and comparison of machine learning techniques, and summarizes these algorithms as traditional machine learning (TML), and deep learning (DL). Moreover, several novel nondestructive technologies, namely acoustic analysis, machine vision (MV), electronic nose (E-nose), and spectral imaging, combined with different advanced ML techniques and their applications in food quality assessment such as variety identification and classification, safety inspection and processing control, are presented. In addition to this, the existing challenges and prospects are discussed. The result of this review indicates that nondestructive testing technologies combined with state-of-the-art machine learning techniques show great potential for monitoring the quality and safety of food products and different machine learning algorithms have their characteristics and applicability scenarios. Due to the nature of feature learning, DL is one of the most promising and powerful techniques for real-time applications, which needs further research for full and wide applications in the food industry.

An Apple Fungal Infection Detection Model Based on BPNN Optimized by Sparrow Search Algorithm

To rapidly detect whether apples are infected by fungi, a portable electronic nose was used in this study to collect the gas information from apples, and the collected information was processed by smoothing filtering, data dimensionality reduction, and outlier removal. Following this, we utilized K-nearest neighbors (KNN), random forest (RF), support vector machine (SVM), a convolutional neural network (CNN), a back-propagation neural network (BPNN), a particle swarm optimization–back-propagation neural network (PSO-BPNN), a gray wolf optimization–backward propagation neural network (GWO-BPNN), and a sparrow search algorithm–backward propagation neural network (SSA-BPNN) model to discriminate apple samples, and adopted the 10-fold cross-validation method to evaluate the performance of each model. The results show that SSA can effectively optimize the performance of the BPNN, such that the recognition accuracy of the optimized SSA-BPNN model reaches 98.40%. This study provides an important reference value for the application of an electronic nose in the non-destructive and rapid detection of fungal infection in apples.

Untargeted rapid differentiation and targeted growth tracking of fungal contamination in rice grains based on headspace-gas chromatography-ion mobility spectrometry

BACKGROUND

Milled rice are prone to be contaminated with spoilage or toxigenic fungi during storage, which may pose a real threat to human health. Most traditional methods require long periods of time for enumeration and quantification. However, headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) technology could characterize the complex volatile organic compounds (VOCs) released from samples in a non-destructive and environmentally friendly manner. Thus, this study described an innovative HS-GC-IMS strategy for analyzing VOC profiles to detect fungal contamination in milled rice.

RESULTS

A total of 24 typical target compounds were identified. Analysis of variance-partial least squares regression (APLSR) showed significant correlations between the target compounds and colony counts of fungi. While the changes of selected volatile components (acetic acid, 3-hydroxy-2-butanone and oct-en-3-ol) in fungi-inoculated rice had sufficiently high positive correlations with the colony counts, the logistic model could effectively be used to monitor the growth of individual fungus (R²  = 0.902-0.980). PLSR could effectively be used to predict fungal colony counts in rice samples (R²  = 0.831-0.953), and the different fungi-inoculated rice samples at 24 h could be successfully distinguished by support vector machine (SVM) (94.6%). The ability of HS-GC-IMS to monitor fungal infection would help to prevent contaminated rice grains from entering the food chain.

CONCLUSIONS

This result indicated that HS-GC-IMS three-dimensional fingerprints may be appropriate for the early detection of fungal infection in rice grains. © 2021 Society of Chemical Industry.

Progress of Research on the Application of Nanoelectronic Smelling in the Field of Food

In the past 20 years, the development of an artificial olfactory system has made great progress and improvements. In recent years, as a new type of sensor, nanoelectronic smelling has been widely used in the food and drug industry because of its advantages of accurate sensitivity and good selectivity. This paper reviews the latest applications and progress of nanoelectronic smelling in animal-, plant-, and microbial-based foods. This includes an analysis of the status of nanoelectronic smelling in animal-based foods, an analysis of its harmful composition in plant-based foods, and an analysis of the microorganism quantity in microbial-based foods. We also conduct a flavor component analysis and an assessment of the advantages of nanoelectronic smelling. On this basis, the principles and structures of nanoelectronic smelling are also analyzed. Finally, the limitations and challenges of nanoelectronic smelling are summarized, and the future development of nanoelectronic smelling is proposed.

Emerging Methods of Monitoring Volatile Organic Compounds for Detection of Plant Pests and Disease

Each year, unwanted plant pests and diseases, such as Hendel or potato soft rot, cause damage to crops and ecosystems all over the world. To continue to feed the growing population and protect the global ecosystems, the surveillance and management of the spread of these pests and diseases are crucial. Traditional methods of detection are often expensive, bulky and require expertise and training. Therefore, inexpensive, portable, and user-friendly methods are required. These include the use of different gas-sensing technologies to exploit volatile organic compounds released by plants under stress. These methods often meet these requirements, although they come with their own set of advantages and disadvantages, including the sheer number of variables that affect the profile of volatile organic compounds released, such as sensitivity to environmental factors and availability of soil nutrients or water, and sensor drift. Furthermore, most of these methods lack research on their use under field conditions. More research is needed to overcome these disadvantages and further understand the feasibility of the use of these methods under field conditions. This paper focuses on applications of different gas-sensing technologies from over the past decade to detect plant pests and diseases more efficiently.

Gas Recognition in E-Nose System: A Review

Gas recognition is essential in an electronic nose (E-nose) system, which is responsible for recognizing multivariate responses obtained by gas sensors in various applications. Over the past decades, classical gas recognition approaches such as principal component analysis (PCA) have been widely applied in E-nose systems. In recent years, artificial neural network (ANN) has revolutionized the field of E-nose, especially spiking neural network (SNN). In this paper, we investigate recent gas recognition methods for E-nose, and compare and analyze them in terms of algorithms and hardware implementations. We find each classical gas recognition method has a relatively fixed framework and a few parameters, which makes it easy to be designed and perform well with limited gas samples, but weak in multi-gas recognition under noise. While ANN-based methods obtain better recognition accuracy with flexible architectures and lots of parameters. However, some ANNs are too complex to be implemented in portable E-nose systems, such as deep convolutional neural networks (CNNs). In contrast, SNN-based gas recognition methods achieve satisfying accuracy and recognize more types of gases, and could be implemented with energy-efficient hardware, which makes them a promising candidate in multi-gas identification.

Overview of advanced technologies for volatile organic compounds measurement in food quality and safety

Food quality and nutrition have received much attention in recent decades, thanks to changes in consumer behavior and gradual increases in food consumption. The demand for high-quality food necessitates stringent quality assurance and process control measures. As a result, appropriate analytical tools are required to assess the quality of food and food products. VOCs analysis techniques may meet these needs because they are nondestructive, convenient to use, require little or no sample preparation, and are environmentally friendly. In this article, the main VOCs released from various foods during transportation, storage, and processing were reviewed. The principles of the most common VOCs analysis techniques, such as electronic nose, colorimetric sensor array, migration spectrum, infrared and laser spectroscopy, were discussed, as well as the most recent research in the field of food quality and safety evaluation. In particular, we described data processing algorithms and data analysis captured by these techniques in detail. Finally, the challenges and opportunities of these VOCs analysis techniques in food quality analysis were discussed, as well as future development trends and prospects of this field.

New Detection Method for Fungal Infection in Silver Fir Seeds

Silver fir trees have cycles of low and high seed production, and thus it is necessary to collect seeds in high production years to save them for low production years to ensure the continuity of nursery production. Tree seeds can be stored loosely in piles or containers, but they need to be checked for viability before planting. The objective of this study was to find a quick and inexpensive method to determine the suitability of seed lots for planting. The working hypothesis was that an electronic nose device could be used to detect odors from fungi or from decomposing organic material, and thus aid in determination of whether seeds could be sown or discarded. To affirm and supplement results from the electronic nose, we used gas chromatography–mass spectrometry (GC-MS) to detect volatile secondary metabolites such as limonene and cadienes, which were found at the highest concentrations in both, infected and uninfected seeds. Uninfected seeds contained exceptionally high concentrations of pinene, which are known to be involved in plant resistance responses. Statistically higher levels of terpineol were found in infected seeds than in uninfected seeds. A prototype of our electronic nose partially discriminated between healthy and spoiled seeds, and between green and white fungal colonies grown on incubated seeds. These preliminary observations were encouraging and we plan to develop a practical device that will be useful for forestry and horticulture.

Recent advances in E-monitoring of plant diseases

Infectious plant diseases are caused by pathogenic microorganisms, such as fungi, oomycetes, bacteria, viruses, phytoplasma, and nematodes. Plant diseases have a significant effect on the plant quality and yield and they can destroy the entire plant if they are not controlled in time. To minimize disease-related losses, it is essential to identify and control pathogens in the early stages. Plant disease control is thus a fundamental challenge both for global food security and sustainable agriculture. Conventional methods for plant diseases control have given place to electronic control (E-monitoring) due to their lack of portability, being time consuming, need for a specialized user, etc. E-monitoring using electronic nose (e-nose), biosensors, wearable sensors, and 'electronic eyes' has attracted increasing attention in recent years. Detection, identification, and quantification of pathogens based on electronic sensors (E-sensors) are both convenient and practical and may be used in combination with conventional methods. This paper discusses recent advances made in E-sensors as component parts in combination with wearable sensors, in electronic sensing systems to control and detect viruses, bacteria, pathogens and fungi. In addition, future challenges using sensors to manage plant diseases are investigated.

Research advance in gas detection of volatile organic compounds released in rice quality deterioration process

Rice quality deterioration will cause grievous waste of stored grain and various food safety problems. Gas detection of volatile organic compounds (VOCs) produced by deterioration is a nondestructive detection method to judge rice quality and alleviate rice spoilage. This review discussed the research advance of VOCs detection in terms of nondestructive detection methods of rice quality deterioration, applications of VOCs in grain detection, inspection of characteristic gas produced during rice spoilage, rice deterioration prevention and control, and detection of VOCs released by rice mildew and insect attack. According to the main causes of rice quality deterioration and major sources of VOCs with off-odor generated during rice storage, deterioration can be divided into mold and insect infection. The results of literature manifested that researches mainly focused on the infection of Aspergillus in the mildew process and the attack of certain pests in recent years, thus the research scope was limited. In this paper, the gas detection methods combined with the chemometrics to qualitatively analyze the VOCs, as well as the correlation with the number of colonies and insects were further studied based on the common dominant strains during rice mildew, that is, Aspergillus and Penicillium fungi, and the common pests during storage, that is, Sitophilus oryzae and Rhyzopertha dominica. Furthermore, this paper pointed out that the quantitative determination of characteristic VOCs, the numeration relationship between VOCs and the degree of mildew and insect infestation, the further expansion of detection range, and the application of degraded rice should be the spotlight of future research.

Early Detection of Mold-Contaminated Peanuts Using Machine Learning and Deep Features Based on Optical Coherence Tomography

Fungal infection is a pre-harvest and post-harvest crisis for farmers of peanuts. In environments with temperatures around 28 °C to 30 °C or relative humidity of approximately 90%, mold-contaminated peanuts have a considerable likelihood to be infected with Aflatoxins. Aflatoxins are known to be highly carcinogenic, posing danger to humans and livestock. In this work, we proposed a new approach for detection of mold-contaminated peanuts at an early stage. The approach employs the optical coherence tomography (OCT) imaging technique and an error-correcting output code (ECOC) based Support Vector Machine (SVM) trained on features extracted using a pre-trained Deep Convolutional Neural Network (DCNN). To this end, mold-contaminated and uncontaminated peanuts were scanned to create a data set of OCT images used for training and evaluation of the ECOC-SVM model. Results showed that the proposed approach is capable of detecting mold-contaminated peanuts with respective accuracies of approximately 85% and 96% after incubation periods of 48 and 96 h.

Electronic Nose Differentiation between Quercus robur Acorns Infected by Pathogenic Oomycetes Phytophthora plurivora and Pythium intermedium

Identification of the presence of pathogenic oomycetes in infected plant material proved possible using an electronic nose, giving hope for a tool to assist nurseries and quarantine services. Previously, species of Phytophthora plurivora and Pythium intermedium have been successfully distinguished in germinated acorns of English oak Quercus robur L. Chemical compound analyses performed by HS-SPME/GC-MS (Headspace Solid-Phase Microextraction/Gas Chromatography-Mass Spectrometry) revealed the presence of volatile antifungal molecules produced by oak seedlings belonging to terpenes and alkanes. Compounds characteristic only of Phytophthora plurivora or Pythium intermedium were also found. Methylcarveol occurred when germinated acorns were infected with Pythium, while neophytadiene (isomer 2 and 3) occurred only when infected with Phytophthora. Moreover, isopentanol was found in acorns infected with Phytophthora, while in control, isopentyl vinyl ether was not observed anywhere else. Among the numerous volatile compounds, isopentanol only occurred in acorns infected with Phytophthora and methylcarveol in acorns infected with Pythium.

Early identification of Aspergillus spp. contamination in milled rice by E-nose combined with chemometrics

BACKGROUND

Rice grains can be contaminated easily by certain fungi during storage and in the market chain, thus generating a risk for humans. Most classical methods for identifying and rectifying this problem are complex and time-consuming for manufacturers and consumers. However, E-nose technology provides analytical information in a non-destructive and environmentally friendly manner. Two-feature fusion data combined with chemometrics were employed for the determination of Aspergillus spp. contamination in milled rice.

RESULTS

Linear discriminant analysis (LDA) indicated that the efficiency of fusion signals ('80^th s values' and 'area values') outperformed that of independent E-nose signals. Linear discriminant analysis showed clear discrimination of fungal species in stored milled rice for four groups on day 2, and the discrimination accuracy reached 92.86% by using an extreme learning machine (ELM). Gas chromatography-mass spectrometry (GC-MS) analysis showed that the volatile compounds had close relationships with fungal species in rice. The quantification results of colony counts in milled rice showed that the monitoring models based on ELM and the genetic algorithm optimized support vector machine (GA-SVM) (R²  = 0.924-0.983) achieved better performances than those based on partial least squares regression (PLSR) (R²  = 0.877-0.913). The ability of the E-nose to monitor fungal infection at an early stage would help to prevent contaminated rice grains from entering the food chains.

CONCLUSIONS

The results indicated that an E-nose coupled with ELM or GA-SVM algorithm could be a useful tool for the rapid detection of fungal infection in milled rice, to prevent contaminated rice from entering the food chain. © 2021 Society of Chemical Industry.

A novel electronic nose for the detection and classification of pesticide residue on apples

Excessive pesticide residues are a serious problem faced by food regulatory authorities, suppliers, and consumers. To assist with this challenge, this work aimed to develop a method of detecting and classifying pesticide residue on fruit samples using an electronic nose, through the application of three different data-recognition algorithms. The apple samples carried various concentrations of two known pesticides, namely cypermethrin and chlorpyrifos. Data collection was performed using a PEN3 electronic nose equipped with 10 metal oxide semiconductor (MOS) sensors. In order to classify and analyze these pesticide residues on the apple samples, principal component analysis (PCA), linear discriminant analysis (LDA), and support vector machine (SVM) results were combined with sensor output responses to realize MOS sensor array data visualization. The results indicated that all three data-recognition algorithms accurately identified the pesticide residues in the apple samples, with the PCA algorithm exhibiting the best classification and discrimination ability. Consequently, this work has shown that the MOS electronic nose, in combination with data-recognition algorithms, can provide support for the rapid and non-destructive identification of pesticide residues in fruits and can provide an effective tool for the detection of pesticide residues in agricultural products.

The MOS electronic nose in combination with data-recognition algorithms can provide an effective tool for the detection of pesticide residues in agricultural products.

Application of a Low-Cost Electronic Nose for Differentiation between Pathogenic Oomycetes Pythium intermedium and Phytophthora plurivora

Compared with traditional gas chromatography-mass spectrometry techniques, electronic noses are non-invasive and can be a rapid, cost-effective option for several applications. This paper presents comparative studies of differentiation between odors emitted by two forest pathogens: Pythium and Phytophthora, measured by a low-cost electronic nose. The electronic nose applies six non-specific Figaro Inc. metal oxide sensors. Various features describing shapes of the measurement curves of sensors' response to the odors' exposure were extracted and used for building the classification models. As a machine learning algorithm for classification, we use the Support Vector Machine (SVM) method and various measures to assess classification models' performance. Differentiation between Phytophthora and Pythium species has an important practical aspect allowing forest practitioners to take appropriate plant protection. We demonstrate the possibility to recognize and differentiate between the two mentioned species with acceptable accuracy by our low-cost electronic nose.

Nondestructive monitoring, kinetics and antimicrobial properties of ultrasound technology applied for surface decontamination of bacterial foodborne pathogen in pork

In this study, electronic nose (E-nose) and Hyperspectral Imaging (HSI) was employed for nondestructive monitoring of ultrasound efficiency (20KHZ) in the inactivation of Salmonella Typhimurium, and Escherichia coli in inoculated pork samples treated for 10, 20 and 30 min. Weibull, and Log-linear model fitted well (R2 ≥ 0.9) for both Salmonella Typhimurium, and Escherichia coli inactivation kinetics. The study also revealed that ultrasound has antimicrobial effects on the pathogens. For qualitative analysis, unsupervised (PCA) and supervised (LDA) chemometric algorithms were applied. PCA was used for successful sample clustering and LDA approach was used to construct statistical models for the classification of ultrasound treated and untreated samples. LDA showed classification accuracies of 99.26%,99.63%,99.70%, 99.43% for E-nose - S. Typhimurium, E-nose -E. coli, HSI - S. Typhimurium and HSI -E. coli respectively. PLSR quantitative models showed robust models for S. Typhimurium- (E-nose Rp2 = 0.9375, RMSEP = 0.2107 log CFU/g and RPD = 9.7240 and (HSI Rp2 = 0.9687 RMSEP = 0.1985 log CFU/g and RPD = 10.3217) and E. coli -(E-nose -Rp2 = 0.9531, RMSEP = 0.2057 log CFU/g and RPD = 9.9604) and (HIS- Rp2 = 0.9687, RMSEP = 0.2014 log CFU/g and RPD = 10.1731). This novel study shows the overall effectiveness of applying E-nose and HSI for in-situ and nondestructive detection, discrimination and quantification of bacterial foodborne pathogens during the application of food processing technologies like ultrasound for pathogen inactivation.

Targeted versus Nontargeted Green Strategies Based on Headspace-Gas Chromatography-Ion Mobility Spectrometry Combined with Chemometrics for Rapid Detection of Fungal Contamination on Wheat Kernels

Conventional methods for detecting fungal contamination are generally time-consuming and sample-destructive, making them impossible for large-scale nondestructive detection and real-time analysis. Therefore, the potential of headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) was examined for the rapid determination of fungal infection on wheat samples in a rapid and nondestructive manner. In addition, the validation experiment of detecting the percent A. flavus infection presented in simulated field samples was carried out. Because the dual separation of HS-GC-IMS could generate massive amounts of three-dimensional data, proper chemometric processing was required. In this study, two chemometric strategies including: (i) nontargeted spectral fingerprinting and (ii) targeted specific markers were introduced to evaluate the performances of classification and prediction models. Results showed that satisfying results for the differentiation of fungal species were obtained based on both strategies (>80%) by the genetic algorithm optimized support vector machine (GA-SVM), and better values were obtained based on the first strategy (100%). Likewise, the GA-SVM model based on the first strategy achieved the best prediction performances (R² = 0.979-0.998) of colony counts in fungal infected samples. The results of validation experiment showed that GA-SVM models based on the first strategy could still provide satisfactory classification (86.67%) and prediction (R² = 0.889) performances for percent A. flavus infection presented in simulated field samples at day 4. This study indicated the feasibility of HS-GC-IMS-based approaches for the early detection of fungal contamination in wheat kernels.

Characterization of Volatile Profiles and Marker Substances by HS-SPME/GC-MS during the Concentration of Coconut Jam

Characteristic aromas are usually key labels for food products. In this study, the volatile profiles and marker substances of coconut jam during concentration were characterized via sensory evaluation combined with headspace solid phase microextraction-gas chromatography-tandem mass spectrometry (HSPME/GC-MS). A total of 33 aroma compounds were detected by HSPME/GC-MS. Principal component analysis revealed the concentration process of coconut jam can be divided into three stages. In the first stage, esters and alcohols were the two main contributors to the aroma of the coconut jam. Next, a caramel smell was gradually formed during the second stage, which was mainly derived from aldehydes, ketones and alcohols. The concentration of aldehydes increased gradually at this stage, which may be the result of a combination of the Maillard reaction and the caramelization reaction. In the final sterilization stage, the 'odor intensity' of caramel reached the maximum level and a variety of aroma compounds were produced, thereby forming a unique flavor for the coconut jam. Finally, furfural fit a logistic model with a regression coefficient (r2) of 0.97034. Therefore, furfural can be used as a marker substance for monitoring the concentration of coconut jam.

A novel method for total chlorine detection using machine learning with electrode arrays

Chlorine is a common natural water disinfectant, but it reacts with ammonia's nitrogen to form chloramines, which affects the accuracy of free chlorine measurement. In this case, total chlorine can be used as an indicator to evaluate the content of the effective disinfectant. In this article, a novel method to detect total chlorine using an electrode array in water has been proposed. We made the total chlorine sensor and captured the cyclic voltammetry curve of the electrode at different concentrations of chlorine ammonia. Principal component analysis and a peak sampling method were used to extract cyclic voltammetry curves, and the total chlorine prediction model was established by support the vector machine and extreme learning machine. The results show that the best predicting power was achieved by support vector regression with principal component analysis (R² = 0.9689). This study provides a simple method for determining total chlorine under certain conditions and likely can be adapted to monitor disinfection and water treatment processes as well.

Establish soft measurement model of total chlorine: cyclic voltammetry curves, principal component analysis and support vector regression.