Encapsulation of eugenol by spray-drying using whey protein isolate or lecithin: Release kinetics, antioxidant and antimicrobial properties

Characterization of Plant based spray dried powders using oil seed proteins and chokeberry extract from wine byproduct

Spray drying is a standard method for preserving bioactive ingredients and enhancing their storage stability. This study aimed to produce entirely plant-based spray-dried powders by using hemp, canola, and flax seed proteins, combined with maltodextrin, as wall material, while chokeberry extract from wine waste served as core material. We conducted a thorough analysis of the oil-seed proteins, examining their nitrogen solubility index, emulsification, and foaming capacities. The encapsulation process was evaluated based on its yield and efficiency. The spray-dried powders were further assessed through colour analysis, particle morphology and size distribution, hygroscopicity, and storage stability measurements. The encapsulation yield with oil-seed proteins ranged from 75.0 ± 6.2 to 78.5 ± 1.3%, and the efficiency from 58.4 ± 0.8 to 77.5 ± 1.9%. These plant-based spray-dried powders exhibited similar colour parameters, morphology, and stability to those of whey protein powders. The study highlights the significant potential of oil-seed proteins in producing plant-based spray-dried powders.

Jerusalem Artichoke Tuber Processing: Influence of Pre-Treatment Methods, Lactic Acid, and Propionic Acid Bacteria Strains on Functional Fermented Beverage Production

Fermented plant-based products are rapidly gaining popularity. Jerusalem artichoke is a medicinal plant that can be used to make fermented beverages. Samples were subjected to pretreatment (ultrasound at 35 kHz for 2, 4, and 6 min, freezing at -80 °C and -17 °C) while an untreated sample was used as control. It was shown that all types of pretreatments did not lead to an increase in protein, solids, polyphenols, and carbohydrates compared to the control sample. The greatest decrease in the values of these indicators occurs when pre-freezing tubers are used for Jerusalem artichoke dispersion production. It was also found that samples frozen at -80 °C had a significantly higher concentration of Ca, Si, Mg, and P whereas untreated samples frozen at -17 °C had more Al, K, Cu, Sr, and Cr. The processing method can affect the sensory descriptors of Jerusalem artichoke tuber dispersions to different extents, but the preference was for the control sample without pre-treatment. The fermentation of Jerusalem artichoke tuber dispersions demonstrated that S. thermophilus induced the most rapid fermentation (pH 4.75 in 5 h). The highest antioxidant activity after fermentation (55.39% FRSA) was shown for L. acidophilus H9, while the highest % FRSA value during the storage period was for L. bulgaricus (67.5%) on day 5 after fermentation. The highest viability among all selected microorganisms was detected for L. bulgaricus, L. acidophilus AT-41, and B. coagulans MTCC 5856 with the increase in biomass content by 2.3, 2.27, and 2.12 log10CFU/ml after fermentation. According to the results of sensory evaluation using hybrid hedonic scale the best results were shown for samples fermented with L. bulgaricus.

Antibacterial effect of protease-responsive cationic eugenol liposomes modified by gamma-polyglutamic acid against Staphylococcus aureus

Eugenol, as a natural antibacterial agent, has been widely studied for its inhibitory effect on the common food-borne pathogen Staphylococcus aureus (S. aureus). However, the widespread application of eugenol is still limited by its instability and volatility. Herein, γ-polyglutamic acid coated eugenol cationic liposomes (pGA-ECLPs) were successfully constructed by self-assembly with an average particle size of 170.7 nm and an encapsulation efficiency of 36.2%. The formation of pGA shell significantly improved the stability of liposomes, and the encapsulation efficiency of eugenol only decreased by 20.7% after 30 days of storage at 4 °C. On the other hand, the pGA layer can be hydrolyzed by S. aureus, achieving effective control of release through response to bacterial stimuli. The application experiments further confirmed that pGA-ECLPs effectively prolonged the antibacterial effect of eugenol in fresh chicken without causing obvious sensory effects on the food. The above results of this study provide an important reference for extending the action time of natural antibacterial substances and developing new stimuli-responsive antibacterial systems.

Efficient Improvement of Eugenol Water Solubility by Spray Drying Encapsulation in Soluplus® and Lutrol F 127

Herein, we present an elegant and simple method for significant improvement of eugenol water solubility using the polymers Soluplus® and Lutrol F 127 as carriers and spray drying as an encapsulation method. The formulations were optimized by adding myo-inositol-a sweetening agent-and Aerosil® 200 (colloidal, fumed silica)-an anticaking agent. The highest encapsulation efficiency of 97.9-98.2% was found for the samples containing 5% eugenol with respect to the mass of Soluplus®. The encapsulation efficiencies of the spray-dried samples with 15% eugenol are around 90%. Although lowering the yield, the addition of Lutrol F 127 results in a more regular particle shape and enhanced powder flowability. The presence of Aerosil® 200 and myo-inositol also improves the rheological powder properties. The obtained formulations can be used in various dosage forms like powders, granules, capsules, creams, and gels.

Soy protein isolate film activated by black seed oil nanoemulsion as a novel packaging for shelf-life extension of bulk bread

This paper investigates the addition of lecithin-emulsified black seed oil (BSO) nanoemulsions (LNEO) and whey protein isolate-stabilized Pickering emulsions (WPEO) to soy protein isolate (SPI)-based films and their effect on improving the shelf life of bread slices. The half-life of antioxidant activity, water vapor permeability, biodegradability, density, color difference, and film thickness significantly increased (p < .05) when BSO was added. However, the incorporation of BSO significantly reduced the solubility, tensile strength, strain to break (except for WPEO), and transparency (p < .05) of the samples. The interaction between SPI film and BSO-loaded nanocarriers, as well as the morphological properties of films, was evaluated using FT-IR and FE-SEM. SPI-based films containing LNEO-5% and WPEO-5% were selected based on their mechanical and barrier properties. The effect of films on the shelf life of bread slices was investigated for 17 days of storage. LNEO samples obtained the most acceptable results in the bread in terms of sensory evaluation and color properties. According to the results, bread slices packed in SPI film containing LNEO-5% showed no signs of mold growth until the 17th day of storage, whereas the sample packed in a low-density polyethylene bag began to corrupt on the 6th day. This study highlights the potential of BSO-loaded SPI films as a novel active packaging for the bakery industry.

Plant Antimicrobials for Food Quality and Safety: Recent Views and Future Challenges

The increasing demand for natural, safe, and sustainable food preservation methods drove research towards the use of plant antimicrobials as an alternative to synthetic preservatives. This review article comprehensively discussed the potential applications of plant extracts, essential oils, and their compounds as antimicrobial agents in the food industry. The antimicrobial properties of several plant-derived substances against foodborne pathogens and spoilage microorganisms, along with their modes of action, factors affecting their efficacy, and potential negative sensory impacts, were presented. The review highlighted the synergistic or additive effects displayed by combinations of plant antimicrobials, as well as the successful integration of plant extracts with food technologies ensuring an improved hurdle effect, which can enhance food safety and shelf life. The review likewise emphasized the need for further research in fields such as mode of action, optimized formulations, sensory properties, safety assessment, regulatory aspects, eco-friendly production methods, and consumer education. By addressing these gaps, plant antimicrobials can pave the way for more effective, safe, and sustainable food preservation strategies in the future.

Encapsulation of Bioactive Peptides by Spray-Drying and Electrospraying

Bioactive peptides derived from enzymatic hydrolysis are gaining attention for the production of supplements, pharmaceutical compounds, and functional foods. However, their inclusion in oral delivery systems is constrained by their high susceptibility to degradation during human gastrointestinal digestion. Encapsulating techniques can be used to stabilize functional ingredients, helping to maintain their activity after processing, storage, and digestion, thus improving their bioaccessibility. Monoaxial spray-drying and electrospraying are common and economical techniques used for the encapsulation of nutrients and bioactive compounds in both the pharmaceutical and food industries. Although less studied, the coaxial configuration of both techniques could potentially improve the stabilization of protein-based bioactives via the formation of shell-core structures. This article reviews the application of these techniques, both monoaxial and coaxial configurations, for the encapsulation of bioactive peptides and protein hydrolysates, focusing on the factors affecting the properties of the encapsulates, such as the formulation of the feed solution, selection of carrier and solvent, as well as the processing conditions used. Furthermore, this review covers the release, retention of bioactivity, and stability of peptide-loaded encapsulates after processing and digestion.

Artificial Neural Networks to Optimize Oil-in-Water Emulsion Stability with Orange By-Products

The use of artificial neural networks (ANNs) is proposed to optimize the formulation of stable oil-in-water emulsions (oil 6% w/w) with a flour made from orange by-products (OBF), rich in pectins (21 g/100 g fresh matter), in different concentrations (0.95, 2.38, and 3.40% w/w), combined with or without soy proteins (0.3 and 0.6% w/w). Emulsions containing OBF were stable against coalescence and flocculation (with 2.4 and 3.4% OBF) and creaming (3.4% OBF) for 24 h; the droplets' diameter decreased up to 44% and the viscosity increased up to 37% with higher concentrations of OBF. With the protein addition, the droplets' diameter decreased by up to 70%, and flocculation increased. Compared with emulsions produced with purified citrus pectins (0.2 and 0.5% w/w), OBF emulsions exhibited up to 32% lower viscosities, 129% larger droplets, and 45% smaller Z potential values. Optimization solved with ANNs minimizing the droplet size and the emulsion instability resulted in OBF and protein concentrations of 3.16 and 0.14%, respectively. The experimental characteristics of the optimum emulsion closely matched those predicted by ANNs demonstrating the usefulness of the proposed method.

Enhancing the Antioxidant Ability of Momordica grosvenorii Saponin to Resist Gastrointestinal Stresses via Microcapsules of Sodium Alginate and Chitosan and Its Application in Beverage

Momordica grosvenorii saponin (MGS), as a promising dietary supplement with remarkable biological properties, has poor stability under acidic conditions and thus hinders its application in functional foods. In this study, capsules of chitosan and sodium alginate were successfully prepared to enhance the stability of MGS. The optimized parameters for preparing MGS capsules were established. Sodium alginate of 20.8 mg/mL and triplication of MGS powder were added to chitosan of 4 mg/mL and calcium chloride of 10 mg/mL at a volume ratio of 3:1, stirring at 1000 r/min for 30 min to form the capsules. In this case, the fresh particles averaged 1687 μm with an encapsulation efficiency (EE) of 80.25% MGS. The capsule tolerated acidic environments better, and in vitro MGS could be controlled to release in a stimulated gastrointestinal tract system. The antioxidant activity and delayed release of MGS could be achieved by microencapsulation of chitosan/sodium alginate. Moreover, one drink containing 19 mg/mL MGS was successfully developed for the fruit.

Nanoencapsulation of essential oils from industrial hemp (Cannabis sativa L.) by-products into alfalfa protein nanoparticles

Essential oils of industrial hemp (Cannabis sativa L.) by-products (HBEO) were characterized by gas chromatography-mass spectrometry (GC-MS); then, encapsulated in alfalfa protein isolate nanoparticles (API-NPs) as a novel nanocarrier. A desirable retention (45.5-63.4%) of HBEO within API-NPs was confirmed. These nanoparticles exhibited a shrunk and globular shape with a size range of 156.9-325.9 nm as indicated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Furthermore, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and thermal analyses corroborated that HBEO was successfully encapsulated within API NPs in an amorphous form without specific chemical interaction with the carrier matrix. The antioxidant activity of loaded HBEO into API-NPs was higher than free HBEO implying that encapsulation of HBEO in API-NPs was an efficient strategy for improving its stability and functionality. HBEO-loaded API-NPs is a promising candidate to be used in future foods and supplements for novel applications.

Potential uses of milk proteins as encapsulation walls for bioactive compounds: A review

Milk proteins have received much awareness due to their bioactivity. However, their encapsulation functions have not attracted enough attention. Milk proteins as encapsulation walls can increase the bioavailability of bioactive compounds. As the benefits of bioactive compounds are critically determined by bioavailability, the effect of interactions between milk proteins and active substances is a critical topic. In the present review, we summarize the effects of milk proteins as encapsulation walls on the bioavailability of active substances with a special focus. The methods and mechanisms of interactions between milk proteins and active substances are also discussed. The evidence collected in the present review suggests that when active substances are encapsulated by milk proteins, the bioavailability of active substances can be significantly affected. This review also provides valuable guidelines for the use of milk protein-based microcarriers.

Protein-based natural antibacterial materials and their applications in food preservation

Plastics materials used for food packaging are recalcitrant, leading to a growing global environmental problem, which arouses the attention of environmental protection departments in many countries. Therefore, to meet the increasing demand for sustainable and environment-friendly consumer products, it is necessary for the food industry to develop natural antibacterial materials for food preservation. This review summarizes the common biodegradable natural antimicrobial agents and their applications in food preservation; as well as an overview of five commonly used biodegradable protein-based polymers, such as zein, soy protein isolate, gelatin and whey protein, with special emphasis on the advantages of protein-based biopolymers and their applications in food packaging industry.

Characterization of Sodium Alginate-Locust Bean Gum Films Reinforced with Daphnetin Emulsions for the Development of Active Packaging

In this study, we characterized an active film made of sodium alginate (SA)—locust bean gum (LBG) containing daphnetin-based film. Physicochemical characteristics, as well as antioxidant and antibacterial properties, were investigated. The results showed that the addition of a low concentration of daphnetin increased the flexibility of SA–LBG cling film, leading to an improvement in elongation at break and tensile strength. As the daphnetin content increased, solubility, brightness and transparency of the cling film decreased, and the moisture permeability increased. The antioxidant capacity and antibacterial activity of films with daphnetin were improved compared to those of the basal film. In addition, the cling film formed by adsorption had higher bacterial (Shewanella putrefaciens and Pseudomonas fluorescens) inhibition and antioxidant activity rates than direct film formation. The results indicate that the combination of daphnetin in SA–LBG film provides an active film with antioxidant and antibacterial properties, with potential for the development of food-grade packaging material.

Effect of ultrasound on the structural characteristics and oxidative stability of walnut oil oleogel coated with soy protein isolate-phosphatidylserine

In this study, the three-dimensional network system formed by rice bran wax (RBW) was used as the internal structure, and the external structure formed by soybean protein isolate (SPI) and phosphatidylserine (PS) was added on the basis of the internal structure to prepare walnut oil oleogel (SPI-PS-WOG). Ultrasonic treatment was applied to the mixed solution to make SPI-PS-WOG, on the basis, the effects of ultrasonic treatment on SPI-PS-WOG were investigated. The results showed that both β and β' crystalline forms were present in all SPI-PS-WOG samples. When the ultrasonic power was 450 W, the first weight loss peak in the thermogravimetric (TGA) curve appeared at 326 °C, which was shifted to the right compared to the peak that occurred when the ultrasonic power was 0 W, indicating that the thermal stability of the SPI-PS-WOG was improved by the ultrasonic treatment. Moreover, when the ultrasonic power was 450 W, the oil holding capacity (OHC) reached 95.3 %, which was the best compared with other groups. Both confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) showed that the ultrasonic treatment of appropriate power succeeded in making the SPI-PS-WOG samples more evenly dispersed in the internal structure and denser in the external structure. In terms of oxidative stability, it was found that the peroxide value of SPI-PS-WOG remained at 9.8 mmol/kg oil for 50 days under 450 W ultrasonic power treatment, which was significantly improved compared with liquid walnut oil (WO). These results provide a new idea for the preparation of oleogels, and also lay a theoretical foundation for the application of ultrasonic treatment in oleogels.

Microencapsulation as a Noble Technique for the Application of Bioactive Compounds in the Food Industry: A Comprehensive Review

The use of natural food ingredients has been increased in recent years due to the negative health implications of synthetic ingredients. Natural bioactive compounds are important for the development of health-oriented functional food products with better quality attributes. The natural bioactive compounds possess different types of bioactivities, e.g., antioxidative, antimicrobial, antihypertensive, and antiobesity activities. The most common method for the development of functional food is the fortification of these bioactive compounds during food product manufacturing. However, many of these natural bioactive compounds are heat-labile and less stable. Therefore, the industry and researchers proposed the microencapsulation of natural bioactive compounds, which may improve the stability of these compounds during processing and storage conditions. It may also help in controlling and sustaining the release of natural compounds in the food product matrices, thus, providing bioactivity for a longer duration. In this regard, several advanced techniques have been explored in recent years for microencapsulation of bioactive compounds, e.g., essential oils, healthy oils, phenolic compounds, flavonoids, flavoring compounds, enzymes, and vitamins. The efficiency of microencapsulation depends on various factors which are related to natural compounds, encapsulating materials, and encapsulation process. This review provides an in-depth discussion on recent advances in microencapsulation processes as well as their application in food systems.

Recent advancements in encapsulation of bioactive compounds as a promising technique for meat preservation

Encapsulation is currently considered as one the most valuable methods for preserving aromatic compounds or hiding odors, enhancing their thermal and oxidative stability, and expanding their food applications. Indeed, this current article was aimed to provide an overview regarding the encapsulation of plant bioactive compounds and the spray-drying and extrusion processes with a focused discussion regarding the encountered challenges for meat and meat product preservation. Furthermore, different ranges of carbohydrates as wall materials (carriers) besides the process conditions' effects on the encapsulation effectiveness and the particle size of the encapsulated bioactive compounds have been discussed. The encapsulation of these compounds ameliorates the quality of the stored meat products by further delaying in microflora growth and lipid/protein oxidation. Therefore, the innovative technologies for plant active compounds encapsulation offer a prospective alternative for natural preservation development in the meat industry.

Essential Oils and Their Application in Food Safety

Food industries are facing a great challenge due to contamination of food products with different microbes such as bacteria, fungi, viruses, parasites, etc. These microbes deteriorate food items by producing different toxins during pre- and postharvest processing. Mycotoxins are one of the most potent and well-studied toxic food contaminants of fungal origin, causing a severe health hazard to humans. The application of synthetic chemicals as food preservatives poses a real scourge in the present scenario due to their bio-incompatibility, non-biodegradability, and environmental non-sustainability. Therefore, plant-based antimicrobials, including essential oils, have developed cumulative interest as a potential alternative to synthetic preservatives because of their ecofriendly nature and generally recognized as safe status. However, the practical utilization of essential oils as an efficient antimicrobial in the food industry is challenging due to their volatile nature, less solubility, and high instability. The recent application of different delivery strategies viz. nanoencapsulation, active packaging, and polymer-based coating effectively addressed these challenges and improved the bioefficacy and controlled release of essential oils. This article provides an overview of essential oils for the preservation of stored foods against bacteria, fungi, and mycotoxins, along with the specialized mechanism of action and technological advancement by using different delivery systems for their effective application in food and agricultural industries smart green preservative.

Spray drying encapsulation of bioactive compounds within protein-based carriers; different options and applications

Spray-drying is known as a common and economical technique for the encapsulation of various nutrients and bioactive compounds. However, shear and thermal tensions during atomization and dehydration, as well as physicochemical instability during storage, result in a loss of these compounds. As a solution, bioactives are stabilized into different carriers, among which proteins and peptides are of particular importance due to their functional properties, surface activity, and film/shell formability around particles. Given the importance of stabilization of bioactive compounds during spray drying, this paper focuses on the role of composition and type of carriers, as well as the characteristics and efficiency of various protein-based carriers in the encapsulation and maintaining of physicochemical, structural, and functional properties, along with biological activity of bioactive compounds (e.g., oleoresins, sterols, polyphenols, anthocyanins, carotenoids, probiotics, and peptides), and nutrients (e.g., vitamins, fatty acids and minerals) alone or in combination with other biopolymers.

Protective effects of whey protein concentrate admixtured of curcumin on metabolic control, inflammation and oxidative stress in Wistar rats submitted to exhaustive exercise

This work aimed to evaluate the effects of whey protein concentrate (WPC) admixtured of curcumin on metabolic control, inflammation and oxidative stress in Wistar rats submitted to exhaustive exercise. A total of forty-eight male rats were divided into six experimental groups (n 8): standard diet group (AIN-93M), standard diet submitted to exhaustion test group (AIN-93M ET), WPC admixtured of curcumin group (WPC + CCM), WPC + CCM submitted to exhaustion test group (WPC + CCM ET), CCM group and CCM subjected to exhaustion test group (CCM ET). The swimming exhaustion test was performed after 4 weeks of experiment. The consumption of WPC + CCM as well as isolated CCM did not alter the biometric measurements, the animals' food consumption and the hepatic and kidney function, as well as the protein balance of the animals (P > 0·05), but reduced the glycaemia and the gene expression of TNF-α and IL-6 and increased the expression of IL-10 (P < 0·05). The animals that were submitted to the exhaustion test (AIN-93M ET) showed higher aspartate aminotransferase values when compared to the animals that did not perform the exercise (AIN-93 M) (P < 0·05). WPC + CCM reduced the concentration of nitric oxide, carbonylated protein and increased the concentration of catalase (P < 0·05). Both (WPC + CCM and CCM) were able to increase the concentrations of superoxide dismutase (P < 0·05). We concluded that the WPC admixtured of CCM represents a strategy capable of decreasing blood glucose and oxidative and inflammatory damage caused by exhaustive physical exercise in swimming.

Influence of sodium caseinate, maltodextrin, pectin and their Maillard conjugate on the stability, in vitro release, anti-oxidant property and cell viability of eugenol-olive oil nanoemulsions

The influence of protein (sodium caseinate-SC), polysaccharide (maltodextrin-MD; pectin-PC) and their Maillard conjugates (sodium caseinate maltodextrin conjugate-SCMDC; sodium caseinate pectin conjugate-SCPCC) were studied on the physico-chemical and biological properties of eugenol nanoemulsions/powder. The chemical composition was optimized using Taguchi design. The particles size of eugenol nanoemulsions with SC, MD, PC, SCMDC and SCPCC were 104.6, 323.5, 1872, 181.7, and 454.4 nm, respectively while their zeta potentials were -31.2, -28.5, -21.4, -40.1 and -25.1 mV, respectively. Turbidity studies revealed higher stability of nanoemulsion prepared with Maillard conjugate (SCMDC) compared to protein or polysaccharides alone. The dispersion of SCMDC eugenol nanoparticles in buffer was prepared to study its stability at different pH (3.0, 5.0, and 7.0) and temperature (4°, 37°, 60 °C) range. In-vitro enzymatic release study showed 31 and 74% release of eugenol after 6 h at pH 2.4 and 7.4, respectively. In vitro antioxidant capacity of SCMDC encapsulated eugenol was higher than native eugenol, as demonstrated by free radical scavenging assays. In comparison to native eugenol, E:SCMDC eugenol showed reduced toxicity. These findings suggested that nanoencapsulated eugenol (E:SCMDC) have a huge potential in nutraceutical and therapeutic applications.

Efficient encapsulation of fish oil: Capitalizing on the unique inherent characteristics of whey cream and hydrolyzed whey protein

The effects of protein concentration and of blending a phospholipid-rich whey coproduct, Procream (Salibra 700 Procream, Glanbia Nutritionals), with intact or hydrolyzed whey protein concentrate, on fish oil microencapsulation efficiency and oxidative stability were assessed. Trypsin and protease M, from Aspergillus oryzae, were used to produce 2 unique hydrolysates. All microcapsules had excellent encapsulation efficiencies (>92%) and good physical properties, regardless of protein content and Procream inclusion. Intact α-lactalbumin and β-lactoglobulin and their peptides were involved in stabilizing oil droplets. Disulfide interchange resulted in formation of protein aggregates, which were more pronounced in samples containing Procream. Although all microcapsules had relatively good oxidative stability, most had better stability at 2 versus 0.5% protein. Protease M hydrolysate + Procream microcapsules had the highest stability, regardless of protein content. Results demonstrated that Procream, at a reduced protein inclusion level, can partially replace more expensive whey protein ingredients in microencapsulation, when blended with a select hydrolysate.

Nanoemulsion-Based Technologies for Delivering Natural Plant-Based Antimicrobials in Foods

There is increasing interest in the use of natural preservatives (rather than synthetic ones) for maintaining the quality and safety of foods due to their perceived environmental and health benefits. In particular, plant-based antimicrobials are being employed to protect against microbial spoilage, thereby improving food safety, quality, and shelf-life. However, many natural antimicrobials cannot be utilized in their free form due to their chemical instability, poor dispersibility in food matrices, or unacceptable flavor profiles. For these reasons, encapsulation technologies, such as nanoemulsions, are being developed to overcome these hurdles. Indeed, encapsulation of plant-based preservatives can improve their handling and ease of use, as well as enhance their potency. This review highlights the various kinds of plant-based preservatives that are available for use in food applications. It then describes the methods available for forming nanoemulsions and shows how they can be used to encapsulate and deliver plant-based preservatives. Finally, potential applications of nano-emulsified plant-based preservatives for improving food quality and safety are demonstrated in the meat, fish, dairy, and fresh produce areas.

Microstructures of encapsulates and their relations with encapsulation efficiency and controlled release of bioactive constituents: A review

Vitamins, peptides, essential oils, and probiotics are examples of health beneficial constituents, which are nevertheless heat-sensitive and possess poor chemical stability. Various encapsulation methods have been applied to protect these constituents against thermal and chemical degradations. Encapsulates prepared by different methods and/or at different conditions exhibit different microstructures, which in turn differently influence the encapsulation efficiency as well as retention of encapsulated core materials. This review provides a summary of various microstructures resulted from the use of selected encapsulation methods or systems, namely, spray coating; co-extrusion; emulsion-, micelle-, and liposome-based; coacervation; and ionic gelation encapsulation, at different conditions. Subsequent effects of the different microstructures on encapsulation efficiency and retention of encapsulated core materials are mentioned and discussed. Encapsulates having compact microstructures resulted from the use of low-surface tension and low-viscosity encapsulants, high-stability encapsulation systems, lower loads of core materials to total solids of encapsulants and appropriate solidification conditions have proved to exhibit higher encapsulation efficiencies and better retention of encapsulated core materials. Encapsulates with hollow, dent, shrunken microstructures or thinner walls resulted from inappropriate solidification conditions and higher loads of core materials, on the other hand, possess lower encapsulation efficiencies and protection capabilities. Encapsulates having crack, blow-hole or porous microstructures resulted from the use of high-viscosity encapsulants and inappropriate solidification conditions exhibit the lowest encapsulation efficiencies and poorest protection capabilities. Compact microstructures and structures formed between ionic biopolymers could be used to regulate the release of encapsulated cores.

Preparation, characterization and release behavior of chitosan-coated nanoliposomes (chitosomes) containing olive leaf extract optimized by response surface methodology

This study was dedicated to the optimization and preparation of chitosan-coated liposomes (chitosomes) as promising nanocarriers for retention of olive leaf extract optimized by Response surface methodology (RSM) based on central composite design. Accordingly, the best sample was chosen for further tests with the encapsulation efficiency, stability and electrical conductivity of 94%, 98% and 9.545 mS respectively. The average size of the optimal chitosome and nanoliposome were lower than 100 nm and the zeta potential was altered from a negative charge to positive after addition coating process with chitosan. Moreover, the differential scanning calorimetry of blank and loaded chitosome revealed the increase of fluidity and lower temperature of phase transition in loaded chitosome compared to blank one. FTIR spectra demonstrated that electrostatic interactions and hydrogen bonds occur between phospholipid polar groups, chitosan amine moieties and major olive leaf extract polyphenols including oleuropein and hydroxy tyrosol. Furthermore, the optimal loaded chitosome had the highest stability during 25 days at the temperature of 4 °C. Finally, the in vitro release tests were best fitted with Peppas-Sahlin and Kopcha models in food simulants and gastrointestinal simulated juice respectively revealing erosion-based release model.

Supplementary Information

The online version contains supplementary material available at (10.1007/s13197-021-04972-2).

Effect of locust bean gum-sodium alginate coatings incorporated with daphnetin emulsions on the quality of Scophthalmus maximus at refrigerated condition

In this study, the microbiological, physicochemical, and flavor changes of turbot (Scophthalmus maximus) coated with a composite active coating of locust bean gum (LBG) and sodium alginate (SA) supplemented with daphnetin emulsions (0.16, 0.32, 0.64 mg·mL^-1) were determined during 18 days of refrigerated storage (4 ± 1 °C). Results showed that LBG-SA coatings containing 0.32 mg·mL^-1 daphnetin emulsions could significantly lower the total viable count (TVC), psychrophiles, Pseudomonas spp. and H₂S-producing bacteria counts, and inhibit the productions of off-flavor compounds including the total volatile basic nitrogen (TVB-N), trimethylamine (TMA) and ATP-related compounds. 32 volatile compounds were identified by solid phase microextraction combined with gas chromatography-mass spectrometer method (SPME-GC/MS) during refrigerated storage and the treated turbot samples significantly lowered the relative content of fishy flavor compounds. Further, the LBG-SA coatings containing daphnetin could also delay the myofibril degradation of the turbot samples. These results indicated that the LBG-SA coatings with 0.32 mg·mL^-1 daphnetin were a potential alternative way to improve the quality of turbot during refrigerated storage.

Drinkable lecithin nanovesicles to study the biological effects of individual hydrophobic macronutrients and food preferences

Fundamental nutritional studies on bioactive molecules require minimizing exposure to confounding foreign elements, like solvents. Herein, aqueous formulations of lecithin nanovesicles are proposed to study three individual trans fatty acids relevant to human nutrition: elaidic acid, trans-vaccenic acid and trans-palmitoleic acid. This proof-of-concept study describes the encapsulation of fatty acids, in vivo bioavailability, and the use of nanovesicles in behavioral experiments. The oral bioavailability of the encapsulated molecules and the selective exposure of animals to each trans-fatty acid of interest were confirmed in healthy rats. Behavioral studies also evidenced that nanovesicles can be used to evaluate the palatability of the lipids and investigate food preferences in mice. Altogether this study shows that lecithin nanovesicles offer an elegant tool to efficiently deliver hydrophobic molecules to animal models. This approach paves the way for future studies deconvoluting the nutritional effects of trans-fatty acids.

Preservative Effects of Gelatin Active Coating Containing Eugenol and Higher CO2 Concentration Modified Atmosphere Packaging on Chinese Sea bass (Lateolabrax maculatus) during Superchilling (-0.9 °C) Storage

The purpose of this research was to explore the fresh keeping effect of modified atmosphere packaging (MAP) with different gas ratios combined with gelatin active coatings containing eugenol on Chinese sea bass stored at −0.9 °C for 36 days. The results showed that MAP3 (60% CO₂/10% O₂/30% N₂), together with gelatin active coatings containing eugenol, could prevent water loss, which maintained high field NMR, MRI, and organoleptic evaluation results. This hurdle technology could also effectively delay the bacterial reproduction, protein degradation, and alkaline accumulation, so it showed the lowest K value, total volatile basic nitrogen, free amino acids, total viable count, Pseudomonas spp., and H₂S-producing bacteria, which better maintain the quality of sea bass.

Synergistic inhibition effect of citral and eugenol against Aspergillus niger and their application in bread preservation

Consumers' preferences for cleaner label products require the food industry to replace synthetic preservatives with natural substitutes. Therefore, the synergistic inhibitory effect of eugenol and citral (S_EC) on Aspergillus niger was explored. On this basis, the antimicrobial sachet containing S_EC was developed and its application potential in bread preservation was evaluated. The content of reactive oxygen species (ROS) and malondialdehyde (MDA) showed that S_EC could significantly induce lipid peroxidation in cell membranes, in which citral played a leading role. The permeation experiments of SEM, TEM, propyl iodide and fluorescein diacetate showed that S_EC could destroy the integrity of the cell membrane. Eugenol contributed more than citral. The OD₂₆₀ and the relative conductivity of the S_EC group increased by 5.2 and 4.1 times, respectively, after 8 h. Finally, the shelf life experiment of bread showed that the antimicrobial sachets containing S_EC could significantly prolong the shelf life of bread without producing unpleasant odour.

The alarming antimicrobial resistance in ESKAPEE pathogens: Can essential oils come to the rescue?

Antibiotics, considered as a backbone of modern clinical-medicines, are facing serious threats from emerging antimicrobial-resistance (AMR) in several bacteria from nosocomial and community origins and is posing a serious human-health concern. Recent commitment by the Heads of States at the United Nations General Assembly (UNGA, 2016) for coordinated efforts to curb such infections illustrates the scale of this problem. Amongst the drug-resistant microbes, major threat is posed by the group named as ESKAPEE, an acronym for Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, Enterobacter spp., and Escherichia coli, comprising high to critical drug-resistant, World Health Organization Critical Priority I and II pathogens. The drying pipeline of effective and new antibiotics has worsened the situation with looming threat of heading to a 'post-antibiotic era'. This necessitates novel and effective approaches to combat this life-threatening issue. Medicinal and aromatic plants are hailed as the reservoir of bioactive compounds and can serve as a source of antimicrobial compounds, and some recent leads show that essential oils (EOs) may provide an effective solution for tackling AMR. EOs have shown wide-spectrum antimicrobial potentials via targeting the major determinants of pathogenicity, drug-resistance and its spread including cell membrane, drug efflux pumps, quorum sensing, biofilms and R-plasmids. Latest reports confirm the EOs having strong direct-killing or re-sensitizing potentials to replace or rejuvenate otherwise fading antibiotics arsenal. We discuss herein possibilities of using EOs directly for antimicrobial potentials or in combination with antibiotics to potentiate the later for combating AMR in ESKAPEE pathogens. The current understandings, success stories and challenges for translational success have also been discussed.

Preservative Effects of Gelatin Active Coating Enriched with Eugenol Emulsion on Chinese Seabass (Lateolabrax maculatus) during Superchilling (−0.9 °C) Storage

This research was to evaluate the effects of gelatin (G) active coating containing eugenol/β-cyclodextrin (βCD) emulsions combined with superchilling (−0.9 °C) on physicochemical, microbiological, and organoleptic properties of Chinese seabass samples during 30 days of storage. Results showed that seabass samples dipped in G-βCD coatings containing 0.15% or 0.3% eugenol combined with superchilling could significantly lower the total volatile basic nitrogen, K value, total viable count, H2S-producing bacteria, Pseudomonas spp. and Psychrophilic counts, and free fatty acids. Further, G-βCD coatings containing eugenol with superchilling (−0.9 °C) were more effective in retarding the water migration by low field NMR and MRI results, maintaining quality of seabass during storage according to organoleptic evaluation results.