Modification of structural, physicochemical and digestive properties of normal maize starch by thermal treatment

Effects of nitrogen fertilizer application on the physicochemical properties of foxtail millet (Setaria italica L.) starch

The use of nitrogen fertilizers is a crucial agronomic practice to increase crop output and quality. This study investigated the impact of five nitrogen application levels (0, 60, 135, 210, and 285 kg N/hm2) on the physicochemical properties of foxtail millet (FM) starch. Optimal nitrogen application (210 kg N/hm2) significantly increased L*, a*, and b* values, water and oil absorption capacity, water solubility, and swelling power. The number of small starch granules increased as the nitrogen application rate increased, but the granule morphology and typical A-type pattern did not change among the treatments. Nitrogen application increased the relative crystallinity and ordered structure, resulting in a higher gelatinization enthalpy. Compared to the control group (7.02 J/g), the enthalpy increased by 21.94 %, 66.38 %, 73.50 %, and 103.28 % under the nitrogen application rates, respectively. Moreover, nitrogen application greatly increased the percentage of A and B3 chains while it lowered the apparent amylose content, peak viscosity, and final viscosity. The effects of 210 and 285 kg N/hm2 treatments on the water solubility and swelling power, water and oil absorption, and light transmission of starch were greater compared to the 60 and 135 kg N/hm2 treatments. These results indicate that nitrogen fertilization significantly affects the physicochemical properties of FM starch.

Macromolecular, thermal, and nonthermal technologies for reduction of glycemic index in food-A review

Consumers rely on product labels to make healthy choices, especially with regard to the glycemic index (GI) and glycemic load (GL), which identify foods that stabilize blood sugar. Employing both thermal and nonthermal processing techniques can potentially reduce the GI, contributing to improved blood sugar regulation and overall metabolic health. This study concentrates on the most current advances in GI-reduction food processing technologies. Food structure combines fiber, healthy fats, and proteins to slow digestion, reducing GI. The influence of thermal approaches on the physical and chemical modification of starch led to decreased GI. The duration of heating and the availability of moisture also determine the degree of hydrolysis of starch and the glycemic effects on food. At a lower temperature, the parboiling revealed less gelatinization and increased moisture. The internal temperature of the product is raised during thermal and nonthermal treatment, speeds up retrogradation, and reduces the rate of starch breakdown.

Applications of physical and chemical treatments in plant-based gels for food 3D printing

Extrusion-based three-dimensional (3D) printing has been extensively studied in the food manufacturing industry. This technology places particular emphasis on the rheological properties of the printing ink. Gel system is the most suitable ink system and benefits from the composition of plant raw materials and gel properties of multiple components; green, healthy aspects of the advantages of the development of plant-based gel system has achieved a great deal of attention. However, the relevant treatment technologies are still only at the laboratory stage. With a view toward encouraging further optimization of ink printing performance and advances in this field, in this review, we present a comprehensive overview of the application of diverse plant-based gel systems in 3D food printing and emphasize the utilization of different treatment methods to enhance the printability of these gel systems. The treatment technologies described in this review are categorized into three distinct groups, physical, chemical, and physicochemical synergistic treatments. We comprehensively assess the specific application of these technologies in various plant-based gel 3D printing systems and present valuable insights regarding the challenges and opportunities for further advances in this field.

Investigating potato flour processing methods and ratios for noodle production

A partial substitution of wheat flour with potato flour processed by various procedures was used to determine an optimal potato pretreatment method for noodle processing. Wheat flour was substituted with 10%, 30%, and 50% potato flour. Potato flour (PF) was processed using two different methods, including freeze-drying (FD) and low-temperature blanching, then oven drying (LTB_OD). The results showed that substituting wheat flour with freeze-dried (FD) flour (44.29 μm) significantly decreased the mean particle size of the blended flour, while LTB_OD flour (223.09 μm) increased the mean particle size. The pasting properties of wheat flour significantly improved when potato flour was added, with FD flour blends having the highest results. The highest dough development time (14.46 min) was attained when LTB_OD potato flour was substituted up to 50%. The microstructure images showed a poor and discontinuous gluten framework when potato flour content reached 50%. Adding potato flour decreased noodles' brightness (L*) while increasing their yellowness (b*). Noodles made from wheat and LTB_OD flour blends resulted in the highest cooking loss. The texture properties of noodles deteriorated when potato flour content reached 30%. Substituting up to 30% with freeze-dried flour and 10% LTB_OD resulted in noodles with the highest overall liking scores. The study suggests that for optimal noodle processing, substituting wheat flour with FD potato flour is more favorable than using LTB_OD, as it improves particle size, pasting properties, and overall liking scores while minimizing adverse effects on texture and cooking loss.

Effects of repeated and continuous dry heat treatments on the physicochemical, structural, and in vitro digestion properties of chickpea starch

The study investigated the impacts of repeated (RDH) and continuous dry heat (CDH) treatments on the physicochemical, structural, and in vitro digestion properties of chickpea starch. The results of SEM and CLSM showed that more fissures and holes appeared on the surface of granules as the treated time of CDH and the circles of RDH increased, both of which made the starch sample much easier to break down by digestive enzymes. Moreover, the fissures and holes of starch granules treated by CDH were more obvious than those of RDH. The XRD and FT-IR results suggested that the crystal type remained C-type, and the relative crystallinity and R1047/1022 of the chickpea starch decreased after dry heat treatments. In addition, a marked decline in the pasting viscosity and gelatinization temperature of chickpea starches was found with dry heat treatments. Moreover, the increased enzyme accessibility of starch was fitted as suggested by the increased RDS content and digestion rate. This study provided basic data for the rational design of chickpea starch-based foods with nutritional functions.

Mild steam treatment: Enhancing the rehydration performance of instant rice noodles by changing the physicochemical properties and gel structure of rice starch

The "instant" quality of instant rice noodles is significantly affected by slow rehydration during cooking. This happens as a result of the native rice starch's low ability to gelatinize as well as the high shear and pressure utilized in industries during the widely used extrusion molding process. In order to address this issue, the rice flour was pretreated with mild steam (MS) technology. The results revealed that the rehydration qualities of the rice noodles that were extruded from the steam-treated flour significantly improved. There was a reduction of 25.5% in the rehydration time, from 443 to 330 s. The MS-treated rice starch's peak viscosity increased to 4503 from 4044 mPa/s. Decreases in gelatinization enthalpy (ΔH) and short-range ordering also suggest a reduction in difficulty in accomplishing starch gelatinization. Scanning electron microscopy studies showed particle aggregation increased as the treatment duration lasted longer. In conclusion, our findings indicate that we successfully addressed the issue of slow rehydration in instant rice noodles while presenting a novel approach for their manufacturing in the manufacturing sector.

Impact of cyclic and continuous dry heat modification on the structural, thermal, technological, and in vitro digestibility properties of potato starch (Solanum tuberosum L.): A comparative study

Dry heat treatment (DHT) has been demonstrated as a viable method for starch modification, offering benefits due to its environmentally friendly process and low operational costs. This research modified potato starch using different DHT conditions (continuous-CDHT and cyclic-RDHT), with durations ranging from 3 to 15 h and 1 to 5 cycles, at 120 °C. The study investigated and compared the structural, thermal, pasting, and morphological properties of the treated samples to those of untreated potato starch, including in vitro digestibility post-modification. DHT altered the amylose content of the biopolymer. X-ray diffraction patterns transitioned from type B to type C, and a decrease in relative crystallinity (RC%) was observed. Morphological changes were more pronounced in starches modified by RDHT. Paste viscosities of both CDHT and RDHT-treated starches decreased significantly, by 61.7 % and 58.1 % respectively, compared to native starch. The gelatinization enthalpy of RDHT-treated starches reduced notably, from 17.60 to 16.10 J g-1. Additionally, starch digestibility was impacted, with cyclic treatments yielding a significant increase in resistant starch content, notably an 18.26 % rise. These findings underscore the efficacy of dry heat in enhancing the functional properties of potato starch.

Structure and functional properties of taro starch modified by dry heat treatment

Taro starch (TS) was modified by dry heat treatment (DHT) for different periods (1, 3, 5, and 7 h at 130 °C) and temperatures (90, 110, 130, and 150 °C for 5 h) to expand its applications in food and other industries. The structure and functional properties of DHT-modified TS were characterized. It was found that TS granules became agglomerated after DHT, and the particle size, amylose content, solubility, and retrogradation enthalpy change of TS increased with increasing dry heating time and temperature, whereas the relative crystallinity, molecular weight, swelling power, gelatinization temperature, and enthalpy change decreased. The absorbance ratio of 1047 cm-1/1022 cm-1 for DHT-modified TS (except at 7 h) was higher than that of native TS. DHT increased the contact angle of TS in a time- and temperature-dependent manner. At a moderate strength, DHT increased the pasting viscosity, relative setback value, and storage modulus but decreased the relative breakdown value. Moreover, DHT (except at 150 °C) caused a decrease in the rapid digestive starch content and estimated glycemic index of TS. These results suggested that DHT-modified TS could be used in foods with high viscosity requirements, gel foods, and low-glycemic index starch-based foods.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Understanding CaCl2 induces surface gelatinization to promote cold plasma modified maize starch: Structure-effect relations

To investigate the influence of surface gelatinization on cold plasma (CP) modification of starch, this study used CaCl2 to modify maize starch by surface gelatinization, further combined with CP treatment and characterized its multi-scale structure and physicochemical properties. The results revealed that starch surface gelatinization causes roughness and fragmentation on the granule surface, and CP undergoes etching effects. The synergistic modification promotes starch degradation, as evidenced by molecular weight decrease and short-chain ratio increase. Although the growth rings, FT-IR patterns, and crystal types of starch remained unchanged, the synergistic modification induced a reduction in the short-range orderliness and crystallinity of starch, thus causing a decrease in the pasting properties and contributing to its solubility. Notably, the CP treatment improved the RDS and SDS contents of the gelatinized starch due to more active sites on the granule surface after gelatinization, and this finding may provide insight into the deep processing of starch.

Insights into the structural characteristics and in vitro starch digestibility on parboiled rice as affected by ultrasound treatment in soaking process

This study investigated ultrasound treatment as a protective parboiling technology for producing low GI rice. Indica and Japonica rice with different amylose contents were subjected to different ultrasound times (15 min, 30 min, and 60 min) and amplitudes (30, 60, and 100%) under soaking conditions for parboiling applications. Starch granules merged and lost their shape when ultrasound treatment time and amplitudes were increased up to 15 min and 30%, respectively. It increased the crystallinity, gelatinization temperatures and decreased pasting viscosity, promoting more resistant starch. The predicted glycemic index (GI) was reduced from 62.9 and 57.6 to 51.3 and 47.1 for Japonica and Indica, respectively. These results suggested that ultrasound soaking is a promising physical method to produce parboiled rice with a lower GI by promoting the formation of amylose chains and decreasing enzyme penetration efficiency.

Solid state cationization reaction of microporous starch with betaine hydrochloride under repeated heating/cooling cycles: Design of a green approach for corn starch modification

In this research, the cationization process of microporous starch with betaine hydrochloride (BHC) in the presence of H3PO4 (as a catalyst) under heating/cooling cycles was reported for the first time. Granular microporous starch was initially prepared from normal corn starch (NS) through amyloglucosidase treatment. Then, solid state cationization reaction of microporous starch (MS) with betaine hydrochloride (BHC) was performed under repeated dry-heat modification. The cationic microporous starch showed higher substitution degree (0.031) and reaction efficiency (89.1 %) in comparison with cationic starch based on NS (0.021, 60.3 %), which this can be attributed to the increased probability of effective collision between BHC molecules and starch granules after enzymatic treatment. The analysis of cationic starches by FTIR and 13C NMR confirmed the presence of cationic functional groups on starch chains. Further examinations on the modified starches by single and dual treatments were accomplished with respect to morphology, particle size distribution, X-ray powder diffraction (XRD), colour parameters, zeta potential, amylose content, viscosity, solubility, and swelling power. The greenness of the suggested dual treatment (score: 82) in this work was evaluated and compared to a conventional method reported in literature (score: 67) on the preparation of cationic starches.

Effects of biochar coupled with chemical and organic fertilizer application on physicochemical properties and in vitro digestibility of common buckwheat (Fagopyrum esculentum Moench) starch

Common buckwheat starch, a functional ingredient, has wide food and non-food applications. Excessive chemical fertilizer application during grain cultivation decreases quality. This study examined the effects of different combinations of chemical fertilizer, organic fertilizer, and biochar treatment on the physicochemical properties and in vitro digestibility of starch. The amendment of both organic fertilizer and biochar was observed to have a greater impact on the physicochemical properties and in vitro digestibility of common buckwheat starch in comparison to organic fertilizer amendment solely. The combined application of biochar, chemical, and organic nitrogen in an 80:10:10 ratio significantly increased the amylose content, light transmittance, solubility, resistant starch content, and swelling power of the starch. Simultaneously, the application reduced the proportion of amylopectin short chains. Additionally, this combination decreased the size of starch granules, weight-average molecular weight, polydispersity index, relative crystallinity, pasting temperature, and gelatinization enthalpy of the starch compared to the utilization of chemical fertilizer alone. The correlation between physicochemical properties and in vitro digestibility was analyzed. Four principal components were obtained, which accounted for 81.18 % of the total variance. These findings indicated that the combined application of chemical fertilizer, organic fertilizer, and biochar would improve common buckwheat grain quality.

Hydrothermal processes and simultaneous enzymatic hydrolysis in the production of modified cassava starches with porous-surfaces

The amylolytic action of α-amylase and amyloglucosidase has been directly implemented in native cassava starches for the formation of cassava microporous granules with unsatisfactory results, however, its incidence in hydrothermally treated granules has never been evaluated. The effect of hydrothermal processes and simultaneous enzymatic hydrolysis on the physicochemical, morphological and structural properties of native cassava starch was evaluated. Native cassava starch presented a rigid, smooth surface, and was exempt from porosities, whereas hydrothermal processes altered the semicrystalline order and increasing the size and number of pores and increasing the size (4.11 ± 0.09 nm) and volume of pores (0.82 ± 0.00 cm3/g × 10-3). The hydrothermal action followed by enzymatic processes with α-amylase and amyloglucosidase, augmented the processes of internal degradation (endo-erosion) and pore widening (exo-erosion), improving the hydrophilic properties compared to the hydrothermal treatment. Likewise, the hydrothermally process followed by enzymatic hydrolysis for 24 h (HPS + EMS-24) increased the degradation of the amorphous lamellae, consistent with a significant decrease in amylose content. This same dual treatment increased the pore size at 17.68 ± 0.13 nm relative to the native counterpart; therefore, they are considered an effective method in the development of modified cassava starches with porous surfaces.

Construction of TiO2/starch nanocomposite cryogel for ethylene removal and banana preservation

Perishability caused by natural plant hormone ethylene has attracted great attention in the field of fruit and vegetable (F&V) preservation. Various physical and chemical methods have been applied to remove ethylene, but the eco-unfriendliness and toxicity of these methods limit their application. Herein, a novel starch-based ethylene scavenger was developed by introducing TiO₂ nanoparticles into starch cryogel and applying ultrasonic treatment to further improve ethylene removal efficiency. As a porous carrier, the pore wall of cryogel provided dispersion space, which increased the area of TiO₂ exposed to UV light, thereby endowing starch cryogel with ethylene removal capacity. The photocatalytic performance of scavenger reached the maximum ethylene degradation efficiency of 89.60 % when the TiO₂ loading was 3 %. Ultrasonic treatment interrupted starch molecular chains and then promoted their rearrangement, increasing the material specific surface area from 54.6 m²/g to 225.15 m²/g and improving the ethylene degradation efficiency by 63.23 % compared with the non-sonicated cryogel. Furthermore, the scavenger exhibits good practicability for removing ethylene as a banana package. This work provides a new carbohydrate-based ethylene scavenger, utilizing as a non-food contact inner filler of F&V packaging in practical applications, which exhibits great potential in F&V preservation and broadens the application fields of starch.

Physicochemical and In Vitro Starch Residual Digestion Structures of Extruded Maize and Sorghum Starches Added with Sodium Stearoyl Lactylate

This research aimed to characterize the physicochemical, in vitro digestion, and structural features of digestion residues of maize and sorghum starches subjected to thermoplastic extrusion, along with the influence of Sodium Stearoyl Lactylate (SSL), to obtain improved starches for food applications and to understand their behavior when consumed as a food ingredient. The morphology of the extruded materials showed remanent starch granules when SSL was used. A higher amount of medium and large linear glucan chains were found in these particles, influencing higher thermal stability (ΔH ≈ 4 J/g) and a residual crystallinity arrangement varying from 7 to 17% in the extrudates. Such structural features were correlated with their digestibility, where slowly digestible starch (SDS) and resistant starch (RS) fractions ranged widely (from 18.28 to 27.88% and from 0.13 to 21.41%, respectively). By analyzing the data with a Principal component analysis (PCA), we found strong influences of B2 and B3 type chains on the thermal stability of the extrudates. The amylose and smaller glucan chains (A and B1) also significantly affected the emulsifying and foam stability properties. This research contributes to the molecular knowledge of starch in extruded products with broad food applications.

The structure-glycemic index relationship of Chinese yam (Dioscorea opposita Thunb.) starch

Yam (Dioscorea opposita Thunb.) is an important functional food in Asia. Yam starch usually has a low glycemic index. What is the structure requirement of starch to obtain a low glycemic index remains unknown. In order to understand the structure-glycemic index relationship, six yam starches from various regions with apparent structure difference were analyzed. Chinese yam starch (CYS) showed the lowest glycemic index. It presented as oval or round granules. Meanwhile, CYS showed a distinct A-type crystal structure while the others presented C-type crystal structure. The largest crystallinity, R_w, M_w/M_n, RS level, RS + SDS level, and the lowest peak viscosity, trough viscosity and C_∞ values were found for CYS. These data explained the lowest glycemic index of CYS. The above results suggested that CYS was a good neutraceutical candidate and could be used in the diet of diabetes population.

Effects of particle size on quality characteristics of stone-milled whole wheat flour

BACKGROUND

Whole wheat flour (WWF) prepared by the direct crushing method preserves all the components of the whole wheat grain. WWF with different particle sizes (180, 150, 125, 106, and 96 μm) was obtained by combining stone milling and particle size sieving technology. The effects of particle size on the proximate composition, farinograph, pasting, thermal, and functional properties, starch microstructure, and Fourier-transform infrared (FTIR) spectroscopy of stone-milled WWF were investigated.

RESULTS

The smaller the particle size of WWF, the higher the damaged starch content. The water absorption, degree of softening, pasting temperature, solubility, and syneresis of WWF increased steadily as the particle size decreased, whereas the peak viscosity, final viscosity, swelling power, water holding capacity, and enthalpy of gelatinization decreased. The scanning electron microscope micrographs revealed that the larger the particle size of WWF, the denser the distribution of starch granules. The β-sheet and β-turn contents of WWF with particle size 180 μm were the highest, reaching up to 33.85% and 39.79%, respectively.

CONCLUSION

The particle size exerted influence on the quality characteristics of stone-milled WWF, and the overall properties of WWF were better at medium particle size. © 2023 Society of Chemical Industry.

Structural, Physicochemical and Digestive Property Changes of Potato Starch after Continuous and Repeated Dry Heat Modification and Its Comparative Study

To investigate the effects of repeated dry heat treatment (RDH) and continuous dry heat treatment (CDH) on the structure and physicochemical and digestive properties of potato starch, potato starch was treated continuously and repeatedly at 130 °C for 3-18 h. The results showed that the crystalline form of starch was consistent with the original type B. Still, its physicochemical properties, such as swelling power, transparency, peak viscosity (PV), final viscosity (FV), breakdown (BD) and thermal properties (To, Tp, Tc, ΔT), tended to decrease. At the same time, solubility and RS increased after dry heat treatment. Moreover, RDH-treated starches were higher than CDH-treated ones in terms of molecular weight, crystallinity, swelling power, transparency and final viscosity for the same treatment time. Still, there was no significant difference between the thermal properties of the two. Meanwhile, the resistant starch (RS) content showed a downward trend after the peak value of 9 h of CDH treatment and five cycles of RDH treatment with increasing treatment time and the number of cycles, indicating a decrease in the overall digestibility of the starch. Overall, RDH had a more significant effect on potato starch's structure and physicochemical properties than CDH.

Recent Insights on the Role of Various Food Processing Operations Towards the Development of Sustainable Food Systems

Chronic hunger and malnutrition will eventually result from the population's rapid growth. It is unlikely to succeed in tackling the rising challenges of delivering sustainable food for all people unless high attention is paid on the function of food processing to ensure the supply of stable food. It is impossible to overstate the importance of developing food processing and preservation technologies that can reduce food losses and wastage during surplus seasons. Therefore, sustainable food systems must be developed to provide healthy diets without damaging our world and its resources. The goal is to use various perspectives to confirm why food processing is crucial to future food supply. It is important to show the appropriate utilization of sustainability factors and effect assessments to construct for feeding the globe while staying within planetary limits. There has never been a better time to assure a plentiful food supply to feed the people than right now, when the population is expanding at a worrying rate. The sustainable food project seeks to move the food systems in a long-term, more equitable direction. Food processing, or the conversion of raw materials into functional, edible, and consumer acceptable food, is a critical link in the food value chain between consumption and production. This review looked at various existing and emerging food processing followed by preservation techniques. Food systems must also attempt to reduce food waste and losses, as well as the current and future impacts on the environment and society, to be sustainable.

Effect of Heat–Moisture Treatment on the Physicochemical Properties, Structure, Morphology, and Starch Digestibility of Highland Barley (Hordeum vulgare L. var. nudum Hook. f) Flour

This study modified native highland barley (HB) flour by heat–moisture treatment (HMT) at different temperatures (90, 110, and 130 °C) and moisture contents (15%, 25%, and 35%). The effects of the treatment on the pasting, thermal, rheological, structural, and morphological properties of the native and HMT HB flour were evaluated. The results showed that HMT at 90 °C and 25% moisture content induced the highest pasting viscosity (3626–5147 cPa) and final viscosity (3734–5384 cPa). In all conditions HMT increased gelatinization temperature (T_o, 55.77–73.72 °C; T_p, 60.47–80.69 °C; T_c, 66.16–91.71 °C) but decreased gelatinization enthalpy (6.41–0.43 J/g) in the HMT HB flour compared with that in the native HB flour. The HB flour treated at 15% moisture content had a higher storage modulus and loss modulus than native HB flour, indicating that HMT (moisture content, 15%, 25%, and 35%) favored the strengthening of the HB flour gels. X-ray diffraction and Fourier-transform infrared spectroscopy results showed that HMT HB flour retained the characteristics of an A-type crystal structure with an increased orderly structure of starch, while the relative crystallinity could be increased from 28.52% to 41.32%. The aggregation of starch granules and the denaturation of proteins were observed after HMT, with additional breakage of the starch granule surface as the moisture content increased. HMT could increase the resistant starch content from 24.77% to 33.40%, but it also led to an increase in the rapidly digestible starch content to 85.30% with the increase in moisture content and heating temperature. These results might promote the application of HMT technology in modifying HB flour.

Effect of Single and Dual Modifications on Properties of Lotus Rhizome Starch Modified by Microwave and γ-Irradiation: A Comparative Study

A comparative study between two novel starch modification technologies, i.e., microwave (MI) and γ-irradiation (IR), is of important significance for their applications. The objective of this work is to compare the changes in lotus rhizome starch (LRS) subjected to single modifications by MI (thermal treatment) and IR (non-thermal treatment), and dual modification by changing the treatment sequence, i.e., microwave followed by irradiation (MI-IR) and irradiation followed by microwave (IR-MI). The amylose content of native and modified LRS varied from 14.68 to 18.94%, the highest and lowest values found for native and MI-LRS, respectively. IR-treated LRS showed the lowest swelling power (4.13 g/g) but highest solubility (86.9%) among native and modified LRS. An increase in light transmittance value suggested a lower retrogradation rate for dual-modified starches, making them more suitable for food application at refrigeration and frozen temperatures. Dual-modified LRS showed the development of fissures and dents on the surface of granules as well as the reduction in peak intensities of OH and CH2 groups in FTIR spectra. Combined modifications (MI and IR) reduced values of pasting parameters and gelatinization properties compared to native and microwaved LRS and showed improved stability to shear thinning during cooking and thermal processing. The sequence of modification also affected the rheological properties; the G′ and G″ of MI-IR LRS were lower (357.41 Pa and 50.16 Pa, respectively) than the IR-MI sample (511.96 Pa and 70.09 Pa, respectively), giving it a soft gel texture. Nevertheless, dual modification of LRS by combining MI and IR made more significant changes in starch characteristics than single modifications.

The effects of fermentation of Qu on the digestibility and structure of waxy maize starch

The fermentation of Qu (FQ) could efficiently produce enzymatically modified starch at a low cost. However, it is poorly understood that how FQ influences the waxy maize starch (WMS) structure and the digestion behavior. In this study, WMS was fermented by Qu at different time and starches were isolated at each time point, and its physico-chemical properties and structural parameters were determined. Results showed that the resistant starch (RS), amylose content (AC), the average particle size [D(4,3)] the ratio of peaks at 1,022/995 cm^-1, and the onset temperature of gelatinization (T _o ) were increased significantly after 36 h. Conversely, the crystallinity, the values of peak viscosity (PV), breakdown (BD), gelatinization enthalpy (ΔH), and the phase transition temperature range (ΔT) were declined significantly after 36 h. It is noteworthy that smaller starch granules were appeared at 36 h, with wrinkles on the surface, and the particle size distribution was also changed from one sharp peak to bimodal. We suggested that the formation of smaller rearranged starch granules was the main reason for the pronounced increase of RS during the FQ process.

Characterization of Sorghum Processed through Dry Heat Treatment and Milling

Sorghum grain nutritional quality can be enhanced by applying dry heat treatments. The purpose of this study was to investigate the effects of dry heat treatment at two temperatures (121 and 14 °C) with three fractionation factors (S fraction < 200 μm, M fraction 200–250 μm and, L fraction > 300 μm) on sorghum flour chemical and functional properties, to optimize processes by means of a desirability function, and to characterize the optimal products. Treatment temperature negatively affected oil- and water-absorption capacity, protein and moisture contents, while the opposite trend was obtained for hydration capacity, swelling power, emulsifying properties, fat, ash, and carbohydrate content. Sorghum flour fractions positively influenced the hydration and water-retention capacities, emulsifying properties, and protein and carbohydrate content, while oil absorption, swelling power, fat, ash, and moisture were negatively affected. The optimal processing determined for each fraction was heat treatment at 121.00 °C for S fraction, 132.11 °C for M, and 139.47 °C for L. Optimal product characterization revealed that the color, bioactive properties, and protein and starch structures of the optimal samples had changed after heat treatment, depending on the fraction. These findings could be helpful for the cereal industry, since sorghum flour could be an alternative for conventional crops for the development of new products, such as snacks, baked goods, and pasta.

Appropriate microwave improved the texture properties of quinoa due to starch gelatinization from the destructed cyptomere structure

•

Microwave dispersed quinoa starch aggregates into independent granules.

•

Dispersed starch granules were hydrated and gelatinized to form network structure.

•

Microwave maintained the crystal form while changed the crystallinity.

•

Excessive microwave makes the starch partially gelatinize and formed blocks.

•

Moderate microwave treatment can improve the hardness and stickiness of quinoa.

Texture characteristics of quinoa under microwave (MW) irradiation were studied from the perspective of starch gelatinization. MW reduced the light transmittance and increased the hardness and stickiness of quinoa. Microstructure showed that MW dispersed the vesicular structure of starch aggregates into separate starch particles, resulting in the full hydration of starch and water molecules to form denser network structures. The value of peak viscosity and setback decreased in RVA after MW treatment, but the gelatinization temperature remained stable. DSC further proved that moderate MW treatment could reduce the gelatinization enthalpy of starch and made quinoa accessible to gelatinize. However, XRD showed that the crystal structure of starch was preserved, but the crystallinity increased. Finally, low field NMR showed that moderate MW stimulated the full hydration of starch to form denser network structures, while excessive MW treatment made starch partially gelatinize and form rigid structure, resulting in negative texture properties.

Influence of ultrasound and microwave treatments on the structural and thermal properties of normal maize starch and potato starch: A comparative study

The effects of ultrasound and microwave on the physicochemical properties of normal maize and potato starches were compared. The cavitation effect of ultrasound loosened the internal space and destroyed the structure of starch granules, increased the damaged starch content, which was consistent with the decrease in relative crystallinity and the number and brightness of Maltese crosses, and the increase in D(0.5) and D(4,3) values. Microwave vibrated the molecules inside the granules and generated heat to destroy the structure of starch. The content of damaged starch was significantly lower in microwave-treated starch compared with ultrasound-treated starch. Microwave treatment promoted the formation of amylose-lipid complex, with the larger peak area at 20°(2θ) than that of the ultrasound-treated starch. The type of starch and the treatment sequence showed a significant effect. The results might help understand the mechanism of ultrasound and microwave treatments influencing the structural properties of starches.

Preparation and characterization of non-crystalline granular starch with low processing viscosity

Non-crystalline granular starch (NCGS) has advantages in the deep processing of starch owing to its unique structure and function. In this study, NCGS was successfully prepared at a baking temperature of 210 °C, and the morphology, structure, pasting properties, and rheological properties of the NCGS were systematically studied. Compared with native starch, NCGS showed a lower processing viscosity and rapid reduction in the peak viscosity from 3795 to 147 cP. Furthermore, NCGS exhibited impaired short- and long-range ordered structures, as indicated by the lower ratio of absorbance at 1047/1015 cm^-1 and decreased crystallinity compared to native starch. Additionally, amylose and amylopectin with long and medium chains in NCGS were degraded into short chains, resulting in an increase in amylose content and branch density. The analysis of the physicochemical properties of NCGS, especially the low processing viscosity, is of great importance for the industrial application of starch, particularly in terms of improving the yield, saving energy, and reducing environmental pollution.

Progress in Starch-Based Materials for Food Packaging Applications

The food packaging sector generates large volumes of plastic waste due to the high demand for packaged products with a short shelf-life. Biopolymers such as starch-based materials are a promising alternative to non-renewable resins, offering a sustainable and environmentally friendly food packaging alternative for single-use products. This article provides a chronology of the development of starch-based materials for food packaging. Particular emphasis is placed on the challenges faced in processing these materials using conventional processing techniques for thermoplastics and other emerging techniques such as electrospinning and 3D printing. The improvement of the performance of starch-based materials by blending with other biopolymers, use of micro- and nano-sized reinforcements, and chemical modification of starch is discussed. Finally, an overview of recent developments of these materials in smart food packaging is given.

Effect of Thermal Pretreatments on Phosphorylation of Corypha umbraculifera L. Stem Pith Starch: A Comparative Study Using Dry-Heat, Heat-Moisture and Autoclave Treatments

Talipot starch, a non-conventional starch source with a high yield (76%) from the stem pith of talipot palm (Corypha umbraculifera L.) was subjected to three different thermal treatments (dry-heat, heat-moisture and autoclave treatments) prior to phosphorylation. Upon dual modification of starch with thermal treatments and phosphorylation, the phosphorous content and degree of crosslinking significantly increased (p ≤ 0.05) and was confirmed by the increased peak intensity of P=O and P-O-C stretching vibrations compared to phosphorylated talipot starch in the FT-IR spectrum. The highest degree of crosslinking (0.00418) was observed in the autoclave pretreated phosphorylated talipot starch sample. Thermal pretreatment remarkably changed the granule morphology by creating fissures and grooves. The amylose content and relative crystallinity of all phosphorylated talipot starches significantly decreased (p ≤ 0.05) due to crosslinking by the formation of phosphodiester bonds, reducing the swelling power of dual-modified starches. Among all modified starches, dry-heat pretreated phosphorylated starch gel showed an improved light transmittance value of 28.4%, indicating reduced retrogradation tendency. Pasting and rheological properties represented that the thermal pretreated phosphorylated starch formed stronger gels that improved thermal and shear resistance. Autoclave treatment before phosphorylation of talipot starch showed the highest resistant starch content of 48.08%.

Changes in structural, digestive, and rheological properties of corn, potato, and pea starches as influenced by different ultrasonic treatments

Ultrasound was widely used in starch modification, whereas there was no review focusing on the effects of different ultrasonic treatments on A-, B- and C-type starches. In this study, the effects of ultrasonic power (UP, 100-600 W) and ultrasonic time (UT, 5-35 min) on structural, digestibility and rheology of corn starch (CS), potato starch (PtS), and pea starch (PS) were investigated. As a result, UP and UT decreased the apparent amylose content of CS and PS, while increased the apparent amylose content of PtS. UP and UT enhanced R1047/1022 values of CS, whereas those of PtS and PS were decreased. Moreover, UP and UT decreased the gelatinization enthalpy of CS, PtS and PS. In vitro digestion revealed that UP and UT decreased the resistant starch content of PtS and PS, but increased the resistant starch content of CS. Rheological tests indicated that UP and UT decreased the flow behavior index of CS, PtS and PS pastes, and caused an increase in storage modulus and loss modulus. Results revealed that ultrasonic treatment represented a promising technology to obtain CS, PtS and PS with tailored digestibility and rheology, which allowed the texture and glycemic response of starch-based products to be adjusted.

Dielectric barrier atmospheric cold plasma applied to the modification of Ariá (Goeppertia allouia) starch: Effect of plasma generation voltage

The goal of this paper was to evaluate the influence of a range of plasma generation voltages on the physicochemical, structural, and technological properties of Aria (Goeppertia allouia) starch. Untreated (0 kV) and high voltages of cold plasma generation (7, 10, 14, and 20 kV) treated samples were evaluated according to their amylose content, pH, groups carbonyl/carboxyl, molecular size distribution, structure and technological properties (empirical viscosity, hydration properties, thermal analysis and gel strength). The applied voltage of 14 kV resulted in the greatest depolymerization of the starch chains, while 20 kV allowed the formation of oxidized complexes, promoting crosslinking of the starches chain. The cold plasma technique did not affect the levels of resistant starches, but increased the starch digestibility. The increased carbonyl and carboxyl groups also influenced the paste viscosity, improved hydration properties. This study suggests that the cold plasma technique can be useful in the controlled modification of starches, producing starches with different technological properties.

Structural comparisons of pyrodextrins during thermal degradation process: The role of hydrochloric acid

Hydrochloric acid (HCl) is widely used to prepare pyrodextrins, especially the water-soluble pyrodextrin. In this study, the structural difference between pyrodextrins as affected by HCl is compared by characterizing the molecular size, chain-length distributions (CLDs), crystallinity, and solubility. It is found that: 1) dry heating of starch granules without HCl mainly degrades long-amylose chains while slightly affects amylopectin branches; 2) the presence of HCl during dry heating decreases the degree of polymerization (DP) range of amylose chains upon degradation from DP ~ 833-1267 to DP ~ 206-432, suggesting that the presence of HCl accelerates the breakdown of long-amylose chains; 3) both pyroconversion processes have slight effects on A-(DP ~ 6-12) and B₁- chains (DP ~ 12-24), which might explain the retained granular and crystalline structure during the process. This study could improve the understanding of the role of HCl in affecting the structure and property during pyroconversion of native starch.

The improving effects of cold plasma on multi-scale structure, physicochemical and digestive properties of dry heated red adzuki bean starch

The effect of dry heat (DH, 130 °C, 1, 3 and 9 h), cold plasma (CP, 40 V, 1, 5 and 10 min) and their combination (D-P) treatment on the structure, physicochemical and digestive properties of red adzuki bean starch were studied. The results showed that DH or CP had slight change in morphology while diffraction pattern of starch was remained. With the extension of treated time of DH and CP, the amylose content, crystallinity, molecular weight, short-range order, the long chain of amylopectin, enthalpy value, swelling power, digestibility were reduced, while gelatinization temperatures, the short chain of amylopectin and solubility were increased. The D-P had deeper modification than the single treatment. The combination of dry heat and cold plasma is a simple and green method to improve the starch structure and enhance starch properties and this modified starch could be implemented to tailor starch to the desired food applications.

Influence of moisture and amylose on the physicochemical properties of rice starch during heat treatment

Moisture and amylose are important factors affecting the quality of heat-treated starches. The amylose content in heat-treated rice starch increased as moisture content (MC) increased from 8% to 30%, but decreased at MC of 70%. With the increase of MC, the paste transmittance, gelatinization temperature, and digestibility of starch increased, whereas the swelling power and enthalpy decreased. The long- and short-range molecular order and the digestive properties of starch with MC ≤ 30% changed moderately, but high MC (70%) gelatinized the starch and drastically changed the physicochemical properties. High amylose content in rice starch led to low long- and short-range molecular order, swelling power, and gelatinization temperature, but increased resistant starch. The results indicated that 30% of MC separates effects of heat treatment of starch, where low MC (≤30%) and high amylose lowers digestibility, which is beneficial for diabetics, while high MC (>30%) promotes solubility and transparency.

Food preservation techniques and nanotechnology for increased shelf life of fruits, vegetables, beverages and spices: a review

Food wastage is a major issue impacting public health, the environment and the economy in the context of rising population and decreasing natural resources. Wastage occurs at all stages from harvesting to the consumer, calling for advanced techniques of food preservation. Wastage is mainly due to presence of moisture and microbial organisms present in food. Microbes can be killed or deactivated, and cross-contamination by microbes such as the coronavirus disease 2019 (COVID-19) should be avoided. Moisture removal may not be feasible in all cases. Preservation methods include thermal, electrical, chemical and radiation techniques. Here, we review the advanced food preservation techniques, with focus on fruits, vegetables, beverages and spices. We emphasize electrothermal, freezing and pulse electric field methods because they allow both pathogen reduction and improvement of nutritional and physicochemical properties. Ultrasound technology and ozone treatment are suitable to preserve heat sensitive foods. Finally, nanotechnology in food preservation is discussed.