Interfacial and emulsification properties of sono-emulsified grape seed oil emulsions stabilized with milk proteins

Co-encapsulation of curcumin and fucoxanthin in solid-in-oil-in-water multilayer emulsions: Characterization, stability and programmed sequential release

To enhance the bioavailability of bioactives with varying efficacy in the gastrointestinal tract (GIT), a co-delivery system of solid-in-oil-in-water (S/O/W) emulsion was designed for the co-encapsulation of two bioactives in this paper. S/O/W emulsions were fabricated utilizing fucoxanthin (FUC)-loaded nanoparticles (NPs) as the solid phase, coconut oil containing curcumin (Cur) as the oil phase, and carboxymethyl starch (CMS)/propylene glycol alginate (PGA) complex as the aqueous phase. The high entrapment efficiency of Cur (82.3-91.3%) and FUC (96.0-96.1%) was found in the CMS/PGA complex-stabilized S/O/W emulsions. Encapsulation of Cur and FUC within S/O/W emulsions enhanced their UV and thermal stabilities. In addition, S/O/W emulsions prepared with CMS/PGA complexes displayed good stability. More importantly, the formed S/O/W emulsion possessed programmed sequential release characteristics, delivering Cur and FUC to the small intestine and colon, respectively. These results contributed to designing co-delivery systems for the programmed sequential release of two hydrophobic nutrients in the GIT.

Sonication as a potential tool in the formation of protein-based stable emulsion - Concise review

Emulsion systems are extensively used in the food processing sector and the use of natural emulsifiers like proteins for stabilizing emulsion has been in demand from consumers due to increased awareness about the consumption of healthy food. Numerous methods are available for the preparation of emulsion, but ultrasound got more attention among common methods owing to its economical and environment-friendly characteristics. The physical effects caused by to bursting of the cavity bubble, result in reduced droplet size, thus forming an emulsion with appreciable stability. Ultrasound ameliorates the emulsifying characteristics of natural emulsifiers like protein and improves the storage stability of the emulsion by positively boosting the rheological, emulsifying characteristics, improving zeta potential, and reducing average droplet size. The stability of protein-based emulsion is affected by environmental stresses hence conjugate of protein with polysaccharide showed good emulsifying characteristics. However, the data on the effect of ultrasound parameters on emulsifier properties is lacking and there is a need to develop a sonication device that can carry out large-scale emulsification operation. The review covers the principles and mechanisms of ultrasound-assisted formation of protein-based and protein-based conjugate emulsions. Further, the effect of ultrasound on various characteristics of protein-based emulsion is also explored. This review will provide concise data to the researchers to extend their experiments in the area of ultrasound emulsification which will help in commercializing the technology at the industrial scale.

Fat analogue emulsions stabilized by peanut protein microgel particles: microscale and nanoscale structure and stabilization process analysis

BACKGROUND

Biopolymer-based microgels are being regarded increasingly as promising building blocks in food applications. This study aimed to clarify the evolution process of the network for fat analogue emulsions stabilized by peanut protein isolate (PPI) microgel particles. It also investigated the interfacial structure and characteristics of emulsions (50% oil phase, w/w) stabilized by microgels under different pH conditions.

RESULTS

There was an increasing interfacial adsorption capacity for PPI microgels over time (from 85.26% to the maximum of 89.78% at 24 h of storage) due to the aggregation of microgels around droplets and the development of cross-linking microgel chains between adjacent interfaces. The increased β-sheet content (from 35.51% to 41.12%) of adsorbed microgels indicated unfolding and the enhanced aggregation of microgels, which led to stronger droplet interaction. The network evolution observed with different microscopes clarified the transition to a self-supporting emulsion. The uneven adsorption of large microgel aggregates at the oil-water interface promoted larger and deformed droplets, so more fat-like medium internal phase emulsion stabilized by PPI microgel could be obtained by adjusting the microgel pH to 4.5. The interfacial membranes observed by scanning electron microscopy were thicker and coarser at pH 3.0 and 4.5 than those at pH 7.0 and 9.0. The adsorption of PPI microgel aggregates enhanced the structural strength and improved emulsion stability.

CONCLUSION

This work could form a basis for further studies relating physical properties to the design of plant protein-based fat analogues. © 2024 Society of Chemical Industry.

Effects of κ-carrageenan on the emulsifying ability and encapsulation properties of pea protein isolate-grape seed oil emulsions

This work investigated the characteristics of pea protein isolate and κ-carrageenan complexes in stabilizing curcumin-loaded emulsions. The complexes structured by electrostatic attraction exhibited biphasic wettability with increased three-phase contact angles close to 90°. Morphological differences in the complexes were the critical factor influencing their emulsifying ability at various pH. As a steric barrier via increasing net negative charge (up to -54.7 ± 2.4 mV) and adsorbed protein content (92.57 %-97.61 %), the interfacial layer could retard droplet coalescence and improve emulsions stability. Rheological tests verified the higher viscoelasticity of emulsions by raising the oil fraction. After 4 weeks of heating treatment, the chemical stability of curcumin was prominently enhanced from 18.6 ± 0.2 % to 64.3 ± 5.7 %. The confirmed synergistic antioxidant activity between grape seed oil and curcumin in emulsions might facilitate the development of specific functional delivery systems in foods.

Shrimp oil nanoemulsions prepared by microfluidization and ultrasonication: characteristics and stability

Shrimp oil (SO) nanoemulsions stabilized by fish myofibrillar protein, considered as functional foods, were prepared via microfluidization and ultrasonication. The study explored varying microfluidization (pressure and cycles) and ultrasonication (amplitude and sonication time) conditions that influenced emulsion properties and stability. Ultrasonicated emulsions exhibited superior emulsifying properties, adsorbed protein content, thermal stability, and centrifugal stability than microfluidized emulsions (p < 0.05). Microfluidization at 6.89 and 13.79 MPa with 2 or 4 cycles yielded larger droplets (536 to 638 nm) (p < 0.05), while ultrasonication at 40% and 50% amplitude for 5, 10 and 15 min produced smaller droplets (426 to 494 nm) (p < 0.05). Optimal conditions were obtained for microfluidization (13.79 MPa, 2 cycles) and ultrasonication (50% amplitude, 10 min). Ultrasonicated emulsions had generally smaller d32 and d43, lower polydispersity and higher ζ-potential than their microfluidized counterparts. Microstructural analysis and CLSM images confirmed their superior stability during storage. SO nanoemulsions could be applied as functional food.

Foaming and Other Functional Properties of Freeze-Dried Mare's Milk

The aim of this study was to evaluate the effect of the freeze-drying process on the preservation of mare's milk. This was achieved through the characterization of the functional properties of reconstituted freeze-dried mare's milk. The chemical composition, bulk density, foam capacity, and ability to form emulsions of the atherogenic, thrombogenic, and hypercholesterolemic fatty acid index were investigated. The freeze-drying process did not change the proportion of the milk components in the dry matter. The moisture content of the freeze-dried mare's milk was 10.3 g/kg and the bulk was below 0.1 g/mL. The foaming capacity was 111.3%; hence, the foaming capacity of the milk was very poor. The oil binding capacity was 2.19 g/g of protein. The freeze-drying process improves the binding degree and retention of oil by milk proteins, but produced foam was unstable, short-lived, and lacked the ability to retain air fractions. The atherogenic index and thrombogenic index values calculated for reconstituted milk were 1.02 and 0.53, respectively. The hypercholesterolemia fatty acid index was 25.01.

Synergistic effect of microfluidization and transglutaminase cross-linking on the structural and oil-water interface functional properties of whey protein concentrate for improving the thermal stability of nanoemulsions

Generally, whey protein concentrate (WPC) undergoes high-temperature denaturation and aggregation, which reduces its emulsifying properties and is not conducive to as an emulsifier to maintain the thermal stability of emulsions. In this study, dynamic high-pressure microfluidization technology (DHPM) combined with TGase (TG) cross-linking was applied to prepare DHPM-TG-WPC, and the thermal stabilization mechanism of nanoemulsions prepared with DHPM-TG-WPC was explored. Results showed DHPM treatment could promote the formation of TG-crosslinked WPC polymers. Compared to WPC, the free sulfhydryl and free amino group content of DHPM-TG-WPC was significantly decreased (P < 0.05), the surface hydrophobicity and interfacial tension of DHPM-TG-WPC were increased by 45.23 % and 62.34 %, respectively. And its emulsifying stability index and interface protein adsorption was significantly enhanced (P < 0.05). Furthermore, compared to WPC, DHPM-WPC and TG-WPC, DHPM-TG-WPC-stabilized nanoemulsions showed the best 15 days of storage stability after thermal sterilization. This study provides a theoretical basis for the application of modified-WPC emulsion.

Preparation of lemon essential oil nanoemulsion and its effect on the microbial community of pork patties

The purpose of this study was to prepare an essential oil nanoemulsion and apply it to meat products to achieve antimicrobial effect. The nanoemulsion of lemon essential oil was produced by high power ultrasonication. The influences of ultrasonic power, ultrasonic time, and mass ratio of sodium caseinate to essential oil on the particle size were examined. The optimal conditions for preparing nanoemulsion were ultrasonic power 327 W, ultrasonic time 18 min, and sodium caseinate to essential oil mass ratio 4.23:1. Lower temperature was more conducive to the preservation of nanoemulsion. Compared to control and essential oil group, the nanoemulsion could decrease the total volatile basic nitrogen content and total bacterial colony in pork patties. When applied to pork patties, the nanoemulsion decreased the microbial diversity and inhibited the growth of a variety of microorganisms such as Bacillus, extending the storage time of pork patties. This study developed a novel and workable nanoemulsion for inhibiting bacteria of meat products.

Study and optimization of oil-in-water emulsions formulated by low- and high-frequency ultrasounds

OBJECTIVE

A combined treatment using both low-frequency (20 kHz) and high-frequency ultrasounds (1.63 MHz) is a promising new process to stabilize emulsions with minimalist formulation. In order to optimize process parameters, a Doehlert experimental design was performed with oil-in-water emulsions, presently used for cosmetic products, composed of water, caprylic/capric triglycerides and oleic acid.

METHODS

Effects of treatment time, oil content and oleic acid content were studied on emulsion properties (droplet size, polydispersity index, ζ-potential and yield of oil incorporation) and on emulsion stability after a 28-day storage (creaming index, Turbiscan stability index (TSI) and oil release).

RESULTS

From experimental data, a model was established that allowed to study effects of each parameter and their interactions on emulsion formation and stability. Oleic acid content had a great impact on emulsion formation: It reduced droplet size, PDI and ζ-potential and increased yield of oil incorporation. However, a critical value could be highlighted, beyond which oleic acid effects reversed. Treatment time had an important beneficial effect on emulsion stability as it decreased creaming index, TSI and oil release after 28 days of storage. Oil content had a negative effect on emulsion formation and on emulsion stability. However, treatment time and oil content often had a beneficial synergistic effect.

CONCLUSION

The optimized conditions for emulsion processing were obtained through a desirability approach. They were experimentally validated.

Thoroughly review the recent progresses in improving O/W interfacial properties of proteins through various strategies

Along with the future food market developing world widely, the personalized nutrition and rational function food design are found to be urgently attracted. Oil in a water (O/W) emulsion system has an excellent ability to maintain nutraceuticals and thus plays a promising role in producing future functional foods. Understanding the interfacial related mechanisms involved are essential for improving the quality of food products. Protein can effectively reduce interfacial tension and stable immiscible phases. The interfacial properties of proteins directly affect the emulsion qualities, which have gradually become a prospective topic. This review will first briefly discuss the interfacial-related fundamental factors of proteins. Next, the paper thoroughly overviewed current physical and chemical strategies tailored to improving the interfacial and emulsion properties of proteins. To be summarized, a higher flexibility could allow protein to be more easily unfolded and adsorbed onto the interface but could also possibly form a softer interfacial film. Several physical strategies, such as thermal, ultrasound and especially high-pressure homogenization are well applied to improve the interfacial properties. The interfacial behavior is also altered by various green chemical strategies, such as pH adjustment, covalent modification, and low molecular weight (LMW) surfactant addition. These strategies upgraded emulsion properties by increasing adsorption load, accelerating diffusion and adsorption rate, associated with lowering interfacial tension, and promoting interfacial protein interactions. Future researches targeted at elucidating interfacial-bulk protein interactions, unraveling interfacial behavior through in silico tools, exploring connection between interfacial-industrial processing properties, and clarifying the interfacial-sensory-digestive relationships of O/W emulsions is needed to develop emulsion applications.

Encapsulation of Nutraceuticals in Yoghurt and Beverage Products Using the Ultrasound and High-Pressure Processing Technologies

Dairy and beverage products are considered highly nutritious. The increase demand for added nutritional benefits within the food systems consumed by the consumers paves the pathway towards fortifying nutraceuticals into these products. However, nutraceuticals are highly unstable towards harsh processing conditions. In addition, the safety of dairy and beverage products plays a very important role. Therefore, various heat treatments are in practice. As the heat-treated dairy and beverage products tends to illustrate several alterations in their organoleptic characteristics and nutritional properties, the demand for alternative non-thermal processing technologies has increased extensively within the food industry. Ultrasound and high-pressure processing technologies are desirable for this purpose as well as a safe and non-destructive technology towards encapsulation of nutraceuticals into food systems. There are benefits in implementing these two technologies in the production of dairy and beverage products with encapsulants, such as manufacturing high-quality products with improved nutritional value while simultaneously enhancing the sensory characteristics such as flavour, taste, texture, and colour and attaining the microbial quality. The primary objective of this review is to provide detailed information on the encapsulation of nutraceuticals and mechanisms involved with using US and HPP technologies on producing encapsulated yoghurt and beverage products.

Crystallization of lipids and lipid emulsions treated by power ultrasound: A review

The actual food system with fat is always complex and fat crystal and fat crystal networks have important effects on the physical properties of food. Recently, power ultrasound (PU) had been widely recognized as an auxiliary technology of fat crystallization to modify food properties. This review expounded on the mechanism of ultrasonic crystallization, and summarized effects of various factors in the process of ultrasonic treatment on fat crystallization. Based on the above, combined with the application of ultrasound in emulsions, the ultrasonic fat crystallization effect in the emulsion system was judged and described. Research results indicated that PU could shorten the induction time of crystallization, accelerate the formation of crystal nuclei, and change the polymorphism of fat crystals. The product treated by PU formed smaller and more uniform crystals to produce a more viscoelastic fat crystal network. In emulsion systems, ultrasonic treatments showed the same effect, but the effect of ultrasonic crystallization on the emulsion stability was different due to fat crystals in different emulsion systems. Meanwhile, the importance of ultrasonic crystallization in lipid emulsions was emphasized, thus ultrasonic crystallization had great potential in emulsion systems.

Effects of proteins on emulsion stability: The role of proteins at the oil-water interface

To obtain a stable protein-added emulsion system, researchers have focused on the design of the oil-water interface. This review discussed the updated details of protein adsorption behavior at the oil-water interface. We evaluated methods of monitoring interfacial proteins as well as their strengths and limitations. Based on the effects of structure on protein adsorption, we summarized the contribution of pre-changing methods to adsorption. In addition, the interaction of proteins and other surface-active molecules at the interface had been emphasized. Results showed that protein adsorption is affected by conformation, oil polarity and aqueous environments. The monitoring of interfacial proteins through spectroscopic properties in actual emulsion systems is an emerging trend. Pre-changing could improve the protein adsorption and the purpose of pre-changing of proteins is similar. In the interaction with other surface-active molecules, co-adsorption is desirable. By co-adsorption, the respective advantages can be exploited to obtain a more stable emulsion system.

Effect of ultrasound on functional properties, flavor characteristics, and storage stability of soybean milk

The effects of different ultrasound treatments (20 kHz at 400 W for 0 to 9 min) on the functional properties, flavor characteristics, and storage stability of soybean milk at 4 °C were investigated. Results indicated that non-sonicated soymilk had the maximum particle size D4, 3 of 2.47 ± 0.47 µm, while 9 min high intensity ultrasound (HIU) decreased D4, 3 to 0.44 ± 0.01 µm. 9 min of HIU decreased the total number of microorganisms in soymilk from 4.51 to 3.95 Log (CFU/mL). Moreover, 9 min HIU increased the absolute value of ζ-potential from 36.43 to 34.13 mV. Turbiscan test showed that 9 min HIU decreased the instability index of soymilk from 0.78 to 0.65. Furthermore, sensory analysis, electronic nose, electronic tongue, and gas chromatography-mass spectrometry showed that 7 min HIU decreased the content of aldehydes, furans, ketones, and alcohols by 52.09%, 75.01%, 56.79%, and 57.27%, respectively.

Economic aspects of waste recovery in the wine industry. A multidisciplinary approach

The complex composition of grapes as well as the quite large variations of each component affect the processing thereof differently and at the same time influence the yield in must, its quality and the wine product; they also influence production losses, along with the quality and quantity of by-products. Vinification wastes cause ecological problems because the neutralization and use of fermentative wastes mixed with different compounds present a danger to the environment and to the health of the population. The ecological measures of protection of the environmental factors are very important, especially the economic efficiency obtained through the recovery of the by-products. This paper focuses on the possibilities of using the by-products obtained from the wine making process, based on the fact that this drink is the most widely known in the world, with the highest percentage in terms of beverage production and implicitly with the largest quantity of by-products obtained. The valorization of these by-products leads to obtaining very valuable products both from a nutritional and industrial point of view. Experimentally, the aim was to determine the physical and chemical characteristics of different types of grape pomace and must sampled from a winery in Romania. Thus, the determination of total acidity, conductivity, pH, total content of phenolic compounds, total nitrogen and total content of pectic substances was aimed. The experimental values obtained have shown that grape pomace is a valuable by-product of the wine industry and its valorization demonstrates an important economic efficiency.