Ultrasensitive quantitation of imidacloprid in vegetables by colloidal gold and time-resolved fluorescent nanobead traced lateral flow immunoassays

Determination of twelve neonicotinoid pesticides in chili using an improved QuEChERS method with UPLC-Q-TOF/MS

In this study, a QuEChERS method based on citrate was developed and utilized for the analysis of twelve neonicotinoid pesticides in fresh red chilies, fresh green chilies, and dried chilies, coupled with ultra-high performance liquid chromatography quadrupole time of flight mass spectrometry (UPLC-Q-TOF/MS). In the sample preparation, acetonitrile containing 1% formic acid was used as the extraction solvent. Anhydrous sodium sulfate replaced the traditional anhydrous magnesium sulfate for water removal, effectively eliminating the issues of salt caking. Graphitized carbon black, octadecyl silica, and primary secondary amine were used as cleaning agents. The method showed good sensitivity, with the limits of quantification below 0.03 mg/kg for fresh chilies and below 0.15 mg/kg for dried chilies. Values of matrix effects ranged from -19.5% to 8.4%, and the recovery was 86.9% - 105.2%. The analytical method provided an effective tool for the high throughput detection of neonicotinoid pesticide residues in multiple chili matrices.

A colloidal gold immunochromatographic method for rapid screening of imidacloprid residues in Chinese herbal medicines

An imidacloprid colloidal gold immunochromatographic strip was developed in this work, and systematic analytical conditions were deeply investigated. The test strips were used for rapid screening of imidacloprid residues in Chinese herbal medicines. The performance of the colloidal gold test strips was investigated by using five selected Chinese herbal medicines (malt, Coix seed, lotus seed, dried ginger and honeysuckle). As a result, the developed imidacloprid colloidal gold immunochromatographic test strips could be used for rapid screening of imidacloprid residues in 60 kinds of different herbs (including 26 kinds of root/rhizome medicines, 20 kinds of seed/fruit/pericarp medicines, 11 kinds of flower/leaf/whole herb medicines, and 3 kinds of bark/aboveground issues of herb medicines), and the cut-off value was 50 μg/kg. The development of this method can achieve the goal of on-site, rapid and low-cost screening of imidacloprid residues in different herbs, which is of great significance for the quality assurance of herbs.

Visual authenticating hazardous adulterant phenolphthalein in slimming foods: Target-mimicking hapten epitope improved immunoassay

Screening for the hazardous adulterant phenolphthalein (PTH) in slimming foods is necessary. Herein, the linkage of the PTH target epitope with various spacer arms was proposed for hapten design, aiming to produce highly sensitive and specific antibodies targeting PTH. To understand the influence of spacer arms on epitope, comprehensive evaluations were conducted using computer-aided chemistry and animal immunization. The resulting antibody exhibited maximal half-inhibitory concentration (IC50) of 0.25 ng/mL. Then, a lateral flow immunoassay (LFIA) was established with detection capability for screening (CCβ) of less than 140, 240, and 25 ng/g for PTH in tea, instant coffee, and oral liquid, respectively. Furthermore, blind sample results agreed well with LFIA and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Therefore, this work not only provides a robust tool for detecting PTH adulteration but also suggests that the careful pairing of spacer arms with hapten epitope is a key factor in advancing rational hapten design.

Generation of a highly specific recombinant full-length antibody for detecting ethirimol in fruit and environmental water

High-performance antibodies are core reagents for highly sensitive immunoassays. Herein, based on a novel hapten, a hybridoma secreting the high-affinity anti-ethirimol monoclonal antibody (mAb-14G5F6) was isolated with an IC50 value of 1.35 μg/L and cross-reactivity below 0.20% for 13 analogs. To further address the challenge of hybridoma preservation and antibody immortalization, a recombinant full-length antibody (rAb-14G5F6) was expressed using the HEK293(F) expression system based on the mAb-14G5F6 gene. The affinity, specificity, and tolerance of rAb-14G5F6, as characterized by indirect competitive enzyme-linked immunosorbent assay and noncompetitive surface plasmon resonance, exhibited high concordance with those of mAb-14G5F6. Further immunoassays based on rAb-14G5F6 were developed for irrigation water and strawberry fruit with limits of detection of 0.0066 and 0.036 mg/kg, respectively, recoveries of 80100%, and coefficients of variation below 10%. Furthermore, homology simulation and molecular docking revealed that GLU(L40), GLY(L107), GLY(H108), and ASP(H114) play important roles in forming hydrogen bonds and pi-anion ionic bonds between rAb-14G5F6 and ethirimol, resulting in the high specificity and affinity of rAb-14G5F6 for ethirimol, with a KD of 5.71 × 10-10 mol/L. Overall, a rAb specific for ethirimol was expressed successfully in this study, laying the groundwork for rAb-based immunoassays for monitoring fungicide residues in agricultural products and the environment.

Immunochromatographic assay for rapid detection of flupyradifurone in grape, blueberry, and tomato samples

Flupyradifurone (FPF) is a neonicotinoid insecticide that effectively controls the spread of various pests. In this study, we established an immunochromatographic assay based on a highly specific and sensitive anti-FPF monoclonal antibody (mAb) to screen for FPF residues in grapes, blueberries, and tomatoes. The cut-off value for the immunochromatographic assay was 5 mg/kg for grapes and 10 mg/kg for blueberries and tomatoes. The calculated limit of detection of the immunochromatographic assay was 0.009 mg/kg, 0.033 mg/kg, and 0.040 mg/kg for grapes, blueberries, and tomatoes, respectively. The recovery rates of the immunochromatographic assay were 97.0-108.2 % in grape samples, 90.9-105.1 % in blueberry samples, and 94.0-103.7 % in tomato samples, and the detection results were highly consistent with LC-MS/MS results. Therefore, this immunochromatographic assay was an effective and rapid tool for screening for FPF in grapes, blueberries, and tomatoes.

Introduction of multilayered quantum dot nanobeads into competitive lateral flow assays for ultrasensitive and quantitative monitoring of pesticides in complex samples

A competitive fluorescent lateral flow assay (CFLFA) is proposed for direct, ultrasensitive, quantitative detection of common pesticides imidacloprid (IMI) and carbendazim (CBZ) in complex food samples by using silica-core multilayered quantum dot nanobeads (SiO2-MQB) as liquid fluorescent tags. The SiO2-MQB nanostructure comprises a 200-nm SiO2 core and a shell of hundreds of carboxylated QDs (excitation/emission maxima ~365/631 nm), and can generate better stability, superior dispersibility, and higher luminescence than traditional fluorescent beads, greatly improving the sensitivity of current LFA methods for pesticides. Moreover, using liquid SiO2-MQB directly instead of via the conjugate pad both simplifies the structure of LFA system and improves the efficiency of immunobinding reactions between nanotags and the targets. Applying these methods, the established CFLFA realized the stable and accurate detection of IMI and CBZ in 12 min, with detection limits down to 1.94 and 14.79 pg/mL, respectively. The SiO2-MQB-CFLFA is practicable for application to real food samples (corn, apple, cucumber, and cabbage), and undoubtedly a promising and low-cost tool for on-site monitoring of trace pesticide residues.

Development of an Effective Neutralizing Antibody Assay for SARS-CoV-2 Diagnosis

Introduction

Neutralizing antibodies (NAbs) are essential for preventing reinfection with SARS-CoV-2 and the recurrence of COVID-19; nonetheless, the formation of NAbs following vaccination and infection remains enigmatic due to the lack of a practical and effective NAb assay in routine laboratory settings. In this study, we developed a convenient lateral flow assay for the rapid and precise measurement of serum NAb levels within 20 minutes.

Methods

Receptor-binding domain-fragment crystallizable (RBD-Fc) and angiotensin-converting enzyme 2-histidine tag (ACE2-His) were expressed by the eukaryotic expression systems of Spodoptera frugiperda clone 9 and human embryonic kidney 293T, respectively. Then, colloidal gold was synthesized and conjugated with ACE2. After optimizing various operating parameters, an NAb lateral flow assay was constructed. Subsequently, its detection limit, specificity, and stability were systematically evaluated, and clinical samples were analyzed to validate its clinical feasibility.

Results

RBD-Fc and ACE2-His were obtained with 94.01% and 90.05% purity, respectively. The synthesized colloidal gold had a uniform distribution with an average diameter of 24.15 ± 2.56 nm. With a detection limit of 2 μg/mL, the proposed assay demonstrated a sensitivity of 97.80% and a specificity of 100% in 684 uninfected clinical samples. By evaluating 356 specimens from infected individuals, we observed that the overall concordance rate between the proposed assay and conventional enzyme-linked immunosorbent assay was 95.22%, and we noticed that 16.57% (59/356) of individuals still did not produce NAbs after infection (both by ELISA and the proposed assay). All the above tests by this assay can obtain results within 20 minutes by the naked eye without any additional instruments or equipment.

Conclusion

The proposed assay can expediently and reliably detect anti-SARS-CoV-2 NAbs after infection, and the results provide valuable data to facilitate effective prevention and control of SARS-CoV-2.

Clinical trial registration

Serum and blood samples were used under approval from the Biomedical Research Ethics Subcommittee of Henan University, and the clinical trial registration number was HUSOM-2022-052. We confirm that this study complies with the Declaration of Helsinki.

Screening and identification of a DNA aptamer to construct the label-free fluorescent aptasensor for ultrasensitive and selective detection of clothianidin residue in agricultural products

Clothianidin pesticide not only pollutes the ecological environment, but also poses a potential threat to human health. Thus, it is of great importance to develop efficient and accurate methods to recognize and detect clothianidin residues in agricultural products. Aptamer has the advantages of easy modification, high affinity and good stability, which is particularly suitable as a recognition biomolecule for pesticide detection. However, the aptamer against clothianidin has not been reported. Herein, the aptamer (named CLO-1) had good selectivity and strong affinity (K_d = 40.66 ± 3.47 nM) to clothianidin pesticide, which was screened for the first time by Capture-SELEX strategy. The binding effect of CLO-1 aptamer to clothianidin was further studied by circular dichroism (CD) spectroscopy and molecular docking technique. Finally, the CLO-1 aptamer was used as the recognition molecule to construct a label-free fluorescent aptasensor using GeneGreen dye as sensing signal for the highly sensitive detection of clothianidin pesticide. The constructed fluorescent aptasensor had the limit of detection (LOD) as low as 5.527 μg L^-1 for clothianidin, and displayed good selectivity against other competitive pesticides. The aptasensor was applied to detect the clothianidin spiked in tomatoes, pears and cabbages, and the recovery rate was good in the range of 81.99%-106.64%. This study provides a good application prospect for the recognition and detection of clothianidin.

Enhanced Lateral Flow Immunoassay with Double Competition and Two Kinds of Nanoparticles Conjugates for Control of Insecticide Imidacloprid in Honey

Finding optimal conditions for competitive lateral flow immunoassay is a controversial task. The content of specific antibodies labeled by nanoparticles should be simultaneously high to reach intense signals and low to register an influence on the signals for minimal concentrations of the target analyte. We propose to use two kinds of complexes of gold nanoparticles in the assay, with antigen-protein conjugates and with specific antibodies. The first complex interacts both with immobilized antibodies in the test zone and with antibodies on the surface of the second complex. In this assay, the coloration is enhanced by the binding of two-colored preparations in the test zone, whereas the antigen in the sample inhibits both the binding of the first conjugate with the immobilized antibodies and with the second conjugate. This approach is realized for the detection of insecticide imidacloprid (IMD), an important toxic contaminant connected with the recent global death of bees. The proposed technique expands the working range of the assay, that is, in accordance with its theoretical analysis. The reliable change of coloration intensity is achieved for a 2.3-times-lower concentration of the analyte. The limit of IMD detection is 0.13 ng/mL for tested solutions and 1.2 µg/kg for initial honey samples. The combination of two conjugates doubles the coloration in the absence of the analyte. The developed lateral flow immunoassay is applicable for five-fold-diluted honey samples without extraction, does not require additional stages (all reagents are pre-applied to the test strip), and is implemented in 10 min.

Highly Sensitive Immunochromatographic Detection of Zearalenone Based on Ultrabright Red-Emitted Aggregation-Induced Luminescence Nanoprobes

Highly luminescent nanospheres have been demonstrated in enhancing the sensitivity of lateral flow immunoassay (LFIA) due to their loading numerous luminescent dyes. However, the photoluminescence intensities of existing luminescent nanospheres are limited due to the aggregation-caused quenching effect. Herein, highly luminescent aggregation-induced emission luminogens embedded nanospheres (AIENPs) with red emission were introduced as signal amplification probes of LFIA for quantitative detection of zearalenone (ZEN). Optical properties of red-emitted AIENPs were compared with time-resolved dye-embedded nanoparticles (TRNPs). Results showed that red-emitted AIENPs have stronger photoluminescence intensity on the nitrocellulose membrane and superior environmental tolerance. Additionally, we benchmarked the performance of AIENP-LFIA against TRNP-LFIA using the same set of antibodies, materials, and strip readers. Results showed that AIENP-LFIA exhibits good dynamic linearity with the ZEN concentration from 0.195 to 6.25 ng/mL, with half competitive inhibitory concentration (IC₅₀) and detection of limit (LOD) at 0.78 and 0.11 ng/mL, respectively. The IC₅₀ and LOD are 2.07- and 2.36-fold lower than those of TRNP-LFIA. Encouragingly, the precision, accuracy, specificity, practicality, and reliability of this AIENP-LFIA for ZEN quantitation were further characterized. The results verified that the AIENP-LFIA has good practicability for the rapid, sensitive, specific, and accurate quantitative detection of ZEN in corn samples.

Rapid and sensitive detection of chlordimeform in cucumber and tomato samples using an immunochromatographic assay

Chlordimeform (CDM) is a broad-spectrum and highly effective insecticide and acaricide used to control pests in agriculture. We produced two monoclonal antibodies (mAbs) against CDM and developed an immunochromatographic assay to screen CDM in cucumbers and tomatoes. MAb 4A3 had high sensitivity with a 50% inhibitory concentration of 0.287 ng mL^-1. The assay had a cut-off value of 25 μg kg^-1 and a visual limit of detection (vLOD) of 1 μg kg^-1 in cucumbers and a cut off value of 50 μg kg^-1 and a vLOD of 2.5 μg kg^-1 in tomatoes. The calculated limit of detection (cLOD) in cucumbers and tomatoes was 0.115 μg kg^-1 and 0.215 μg kg^-1, respectively. The recovery rates were 97.9% to 106.9% for cucumbers and 97.8% to 107.4% for tomatoes, consistent with the results obtained from indirect competitive ELISA. Our findings showed that the immunochromatographic assay is an efficient and accurate method for CDM detection in cucumbers and tomatoes.

Production of a Monoclonal Antibody for the Detection of Forchlorfenuron: Application in an Indirect Enzyme-Linked Immunosorbent Assay and Immunochromatographic Strip

In this study, a monoclonal antibody (mAb) specific to forchlorfenuron (CPPU) with high sensitivity and specificity was produced and designated (9G9). To detect CPPU in cucumber samples, an indirect enzyme-linked immunosorbent assay (ic-ELISA) and a colloidal gold nanobead immunochromatographic test strip (CGN-ICTS) were established using 9G9. The half-maximal inhibitory concentration (IC₅₀) and the LOD for the developed ic-ELISA were determined to be 0.19 ng/mL and 0.04 ng/mL in the sample dilution buffer, respectively. The results indicate that the sensitivity of the antibodies prepared in this study (9G9 mAb) was higher than those reported in the previous literature. On the other hand, in order to achieve rapid and accurate detection of CPPU, CGN-ICTS is indispensable. The IC₅₀ and the LOD for the CGN-ICTS were determined to be 27 ng/mL and 6.1 ng/mL. The average recoveries of the CGN-ICTS ranged from 68 to 82%. The CGN-ICTS and ic-ELISA quantitative results were all confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) with 84-92% recoveries, which indicated the methods developed herein are appropriate for detecting CPPU in cucumber. The CGN-ICTS method is capable of both qualitative and semiquantitative analysis of CPPU, which makes it a suitable alternative complex instrument method for on-site detection of CPPU in cucumber samples since it does not require specialized equipment.

Tuning of (E)-(4-fluorophenyl)-1,1-diamino-2,3-diazabuta-1,3-diene nanostructures for the selective detection of imidacloprid

The present work demonstrates a facile route for synthesizing the organic nanoparticles (ONPs) and the blue fluorescent Quantum Dots (QDs) based on an organic molecule named (E)-(4-fluorophenyl)-1,1-diamino-2,3-diazabuta-1,3-diene. The synthesis process possesses advantages viz green synthesis, non-toxic degraded products, and amount of organic compound. Initially, the ONPs were prepared using the nanoprecipitation method and were screened for their recognition potential against various pesticides, however, no selectivity has been observed. This motivated us to tune the ONPs into QDs. The QDs were prepared using the hydrothermal method and a color change was observed in the QDs solution under daylight and under a UV lamp. The emission wavelength was observed at 400 nm (λexcitation = 278 nm). The synthesized QDs exhibited selective sensing potential towards imidacloprid via a quenching mechanism. A normalised decrement in the luminescence intensity of QDs was observed on raising the concentration of imidacloprid and a good linear response was noticed over a concentration varies from 1 μM to 100 μM with a regression coefficient of 0.99. The detection limit was estimated to be 4.53 nM and quantification limit was calculated to be and 13.72 nM.

Development of a colloidal gold immunochromatographic test strip for the rapid detection of iprodione

Iprodione is a dicarboximide fungicide that is widely used in agriculture around the world. A reliable and rapid detection method is needed for the on-site monitoring of iprodione residues in a variety of agricultural products. Herein, a colloidal gold immunochromatographic test strip was developed based on a selected coating antigen and a specific monoclonal antibody against iprodione. The particle size of colloidal gold, the preparation technique of the conjugate pad, the composition of the loading buffer, and the extraction solvent were comprehensively optimized for the test strip. A cut-off value of 0.9 mg kg^-1 (50 ng mL^-1) and a visual limit of detection of 0.09 mg kg^-1 (5 ng mL^-1) were achieved in a complex matrix of tobacco. No cross-reactivity was observed for iprodione metabolite and four other widely used pesticides during tobacco growth. Furthermore, the developed colloidal gold immunochromatographic test strip was applied to determine iprodione residues in tobacco samples, and the obtained results were in good agreement with those obtained by liquid chromatography tandem mass spectrometry. Additionally, the test strip was found to be stable afterlong-term storage at 37 °C for two months. The developed colloidal gold immunochromatographic test strip showed excellent accuracy, sensitivity, specificity, and stability, therefore, it is suitable for the rapid detection of iprodione residues in complex matrices.

Recent Advances in Rapid Detection Techniques for Pesticide Residue: A Review

As an important chemical pollutant affecting the safety of agricultural products, the on-site and efficient detection of pesticide residues has become a global trend and hotspot in research. These methodologies were developed for simplicity, high sensitivity, and multiresidue detection. This review introduces the currently available technologies based on electrochemistry, optical analysis, biotechnology, and some innovative and novel technologies for the rapid detection of pesticide residues, focusing on the characteristics, research status, and application of the most innovative and novel technologies in the past 10 years, and analyzes challenges and future development prospects. The current review could be a good reference for researchers to choose the appropriate research direction in pesticide residue detection.

A comprehensive review on the pretreatment and detection methods of neonicotinoid insecticides in food and environmental samples

•

The metabolism and residue status of neonicotinoids were briefly summarized in this work.

•

Sample pretreatment techniques for the analysis of neonicotinoids were critically discussed.

•

The commonly used detection methods for neonicotinoids residues were also pointed out.

In recent years, the residues of neonicotinoid insecticide in food and environmental samples have attracted extensive attention. Neonicotinoids have many adverse effects on human health, such as cancer, chronic disease, birth defects, and infertility. They have substantial toxicity to some non-target organisms (especially bees). Hence, monitoring the residues of neonicotinoid insecticides in foodstuffs is necessary to guarantee public health and ecological stability. This review aims to summarize and assess the metabolic features, residue status, sample pretreatment methods (solid-phase extraction (SPE), Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS), and some novel pretreatment methods), and detection methods (instrument detection, immunoassay, and some innovative detection methods) for neonicotinoid insecticide residues in food and environmental samples. This review provides detailed references and discussion for the analysis of neonicotinoid insecticide residues, which can effectively promote the establishment of innovative detection methods for neonicotinoid insecticide residues.

Trace Immunosensing of Multiple Neonicotinoid Insecticides by a Novel Broad-Specific Antibody Obtained from a Rational Screening Strategy

Residues of neonicotinoid pesticides have potential risks to food, environmental and biological safety. In this study, the hapten toward imidacloprid was adopted to gain antibodies. After molecular modeling, the electrostatic potentials of eight commonly-used neonicotinoid pesticides were individually calculated to analyze the structural similarity. Two representative compounds (imidacloprid and acetamiprid) with moderate similarity were rationally selected for hybridoma screening. Using this strategy, four clones of broad-specific monoclonal antibodies (mAbs) against multiple neonicotinoids were obtained, and the clone 6F11 exhibited the broadest spectrum to six neonicotinoid pesticides and two metabolites, with half-maximal inhibitory concentrations (IC₅₀) ranging from 0.20 to 5.92 ng/mL. Then, the novel antibody gene was sequenced and successfully expressed in full-length IgG form using mammalian cells. Based on the sensitive recombinant antibody, a gold lateral-flow immunosensing strip assay was developed and it was qualified for rapid detection of imidacloprid, clothianidin or imidaclothiz residues in food samples.

Rapid screening of imidacloprid residue in grains and medicinal herbs: A newly designed hapten and monoclonal antibody

Three different imidacloprid hapten structures were designed to conjugate with proteins (bovine serum albumin, BSA; ovalbumin, OVA; keyhole limpet hemocyanin, KLH) for screening the optimal immunogen and coating antigen. Among these, an unreported antigen (hapten 6-KLH) was selected as the optimal immunogen and coating antigen. In addition, an imidacloprid-specific and high titer monoclonal antibody (IMIB7C3) was obtained by using the above-selected immunogen. A sensitive ic-ELISA (indirect competitive enzyme-linked immunosorbent assay) with a half-maximal inhibitory concentration (IC₅₀) of 1.3 ng mL^-1 was established by using the IMIB7C3 antibody (only 1.2 ng per well) to detect the residues of imidacloprid in grains (wheat and maize) and different herbs (Notoginseng radix et rhizoma, Dioscoreae rhizoma, Lonicerae japonicae flos, Astragali radix, Jujubae fructus). The detection results of real samples by the developed immunoassay were confirmed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), which proved the accuracy and reliability of the established ic-ELISA. These results indicate that the proposed ic-ELISA method is suitable for rapid and high-throughput detection of imidacloprid residues in agricultural products and medicinal herbs. Furthermore, a quantitative risk assessment was conducted for Lonicerae japonicae flos based on the detection results, which indicates an acceptable risk to human health after the intake of Lonicerae japonicae flos polluted by imidacloprid.

Lateral flow assay applied to pesticides detection: recent trends and progress

Devices based on lateral flow assay (LFA) have been gaining more and more space in the detection market mainly due to their simplicity, speed, and low cost. These devices have excellent sensing format versatility and make these strips an ideal choice for field applications. The COVID-19 pandemic boosted the democratization of this method as a "point of care testing" (POCT), and the trend is that these devices become protagonists for the monitoring of pesticides in the environment. However, designing LFA devices for detecting and monitoring pesticides in the environment is still a challenge. This is because analytes are small molecules and have only one antigenic determinant, which makes it difficult to apply direct immunoassays. Furthermore, most LFA devices provide only qualitative or semi-quantitative results and have a limited number of applications in multi-residue analysis. Here, we present the state of the art on the use of LFA in the environmental monitoring of pesticides. Based on well-documented results, we review all available LFA formats and strategies for pesticide detection, which may have important implications for the future of monitoring pesticides in the environment. The main advances, challenges, and perspectives of these devices for a direction in this field of study are also presented.

Ag Nanoparticles with Ultrathin Au Shell-Based Lateral Flow Immunoassay for Colorimetric and SERS Dual-Mode Detection of SARS-CoV-2 IgG

Immunoglobulin detection is essential for diagnosing progression of SARS-CoV-2 infection, for which SARS-CoV-2 IgG is one of the most important indexes. In this paper, Ag nanoparticles with ultrathin Au shells (∼2 nm) embedded with 4-mercaptobenzoic acid (MBA) (AgMBA@Au) were manufactured via a ligand-assisted epitaxial growth method and integrated into lateral flow immunoassay (LFIA) for colorimetric and SERS dual-mode detection of SARS-CoV-2 IgG. AgMBA@Au possessed not only the surface chemistry advantages of Au but also the superior optical characteristics of Ag. Moreover, the nanogap between the Ag core and the Au shell also greatly enhanced the Raman signal. After being modified with anti-human antibodies, AgMBA@Au recognized and combined with SARS-CoV-2 IgG, which was captured by the SARS-CoV-2 spike protein on the T line. Qualitative analysis was achieved by visually observing the color of the T line, and quantitative analysis was conducted by measuring the SERS signal with a sensitivity four orders of magnitude higher (detection limit: 0.22 pg/mL). The intra-assay and inter-assay variation coefficients were 7.7 and 10.3%, respectively, and other proteins at concentrations of 10 to 20 times higher than those of SARS-CoV-2 IgG could hardly produce distinguishable signals, confirming good reproducibility and specificity. Finally, this method was used to detect 107 clinical serum samples. The results agreed well with those obtained from enzyme-linked immunosorbent assay kits and were significantly better than those of the colloidal gold test strips. Therefore, this dual-mode LFIA has great potential in clinical practical applications and can be used to screen and trace the early immune response of SARS-CoV-2.

Development of a Rapid Gold Nanoparticle Immunochromatographic Strip Based on the Nanobody for Detecting 2,4-DichloRophenoxyacetic Acid

2,4-Dichlorophenoxyacetic acid (2,4-D) is a systemic conductive herbicide widely used across the world. With the large-scale and continuous use of 2,4-D, its possible harm to the environment and non-target organisms has attracted increasing attention, and the construction of a stable rapid on-site detection method is particularly important. In order to achieve on-site rapid detection of 2,4-D, we developed a gold nanoparticle immunochromatographic strip method with the visual elimination value was 50 ng/mL, and a quantitative detection limit of 11 ng/mL based on a nanobody. By combing with the color snap, the immunochromatographic strip could quantitatively analyze the amounts of 2,4-D. Meanwhile, a colorimetric card based on the true color of the test strips was developed for the qualitative analysis of 2,4-D on-site. The samples (water, fruits and vegetables) with and without 2,4-D were detected by the immunochromatographic strips, and the results showed the accuracy and reliability. Thus, this assay is a rapid and simple on-site analytical tool to detect and quantify 2,4-D levels in environmental samples, and the analytical results can be obtained in about ten minutes. In addition, the nanobody technology used in this study provides an inexhaustible supply of a relatively stable antibodies that can be archived as a nanobody, plasmid or even its sequence.

Development and application of immunoassays for rapid quality control of the antimalarial drug combination artesunate-mefloquine

Artesunate-mefloquine is one of the commonly-used artemisinin-based combination therapies (ACTs). Given the significance of drug quality in the management of malaria cases, the objective of this study was to develop antibody-based assays as the point-of-care (POC) tests for monitoring the quality of this ACT. Using mefloquine conjugated to a carrier protein as the immunogen, we selected a specific monoclonal antibody (mAb) against mefloquine with no cross-reactivity to other antimalarial drugs. Using this mAb, we developed a direct competitive enzyme-linked immunosorbent assay (dcELISA) and a lateral flow immunoassay (LFIA) to measure the mefloquine contents. The dcELISA for mefloquine showed a 50% inhibitory concentration (IC₅₀) and a working range of 2.79 ng/mL and 0.58-16.37 ng/mL, respectively. With the aid of a portable optical scanner, the LFIA had a working range of 0.15-2.67 µg/mL for mefloquine. When used to measure mefloquine contents in commercial drugs, the dcELISA and LFIA results were compatible with those determined using high-performance liquid chromatography. Using the same LFIA format, we developed a combination LFIA, which correctly estimated the artesunate and mefloquine contents in commercial ACTs. Therefore, both LFIAs could be used as POC devices for rapid quality control of artesunate and mefloquine in ACTs.

An Overview for the Nanoparticles-Based Quantitative Lateral Flow Assay

The development of the lateral flow assay (LFA) has received much attention in both academia and industry because of their broad applications to food safety, environmental monitoring, clinical diagnosis, and so forth. The user friendliness, low cost, and easy operation are the most attractive advantages of the LFA. In recent years, quantitative detection has become another focus of LFA development. Here, the most recent studies of quantitative LFAs are reviewed. First, the principles and corresponding formats of quantitative LFAs are introduced. In the biomaterial and nanomaterial sections, the detection, capture, and signal amplification biomolecules and the optical, fluorescent, luminescent, and magnetic labels used in LFAs are described. The invention of dedicated strip readers has drawn further interest in exploiting the better performance of LFAs. Therefore, next, the development of dedicated reader devices is described and the usefulness and specifications of these devices for LFAs are discussed. Finally, the applications of LFAs in the detection of metal ions, biotoxins, pathogenic microorganisms, veterinary drugs, and pesticides in the fields of food safety and environmental health and the detection of nucleic acids, biomarkers, and viruses in clinical analyses are summarized.

Fluorescence-based immunochromatographic test strip for the detection of hyoscyamine

Hyoscyamine (HSM), which acts as an antagonist of the acetylcholine muscarinic receptor and can induce a variety of distinct toxic syndromes in mammals (anti-cholinergic poisoning), is hazardous to human health. Therefore, it is urgent to develop a rapid, sensitive, and cost-effective method to determine HSM. A fluorescent microsphere based immunochromatographic assay was developed for this analyte and gold nanoparticles (AuNPs) were used as a comparison. A monoclonal antibody against HSM was prepared with a 50% inhibition concentration (IC₅₀) of 1.17 ng mL^-1, with no cross-reactivity with five drugs. Under optimized conditions, the cut off limits using the fluorescence-labeled monoclonal antibody strips were 10 ng mL^-1 in 0.01 M PBS and 20 ng mL^-1 in pork, pig urine, and honey samples, and the assay could be completed within 10 min. In comparison with a AuNP immunochromatographic assay, the developed method offered a higher coupling rate and lower amounts of antibodies. This approach could be used for simple, sensitive and rapid screening, and is suitable for on-site screening applications.

Analysis of imidacloprid residues in mango, cowpea and water samples based on portable molecular imprinting sensors

Imidacloprid is a neonicotinoid insecticide widely used in the production and cultivation of crops. In recent years, the extensive use of imidacloprid in agricultural production has resulted in large amounts of pesticide residues in agricultural products and the environment. Therefore, it is necessary to establish a rapid, accurate, sensitive and convenient method for detecting imidacloprid pesticide residues to ensure the safety of agricultural products and the environment. To clarify how to use the molecular imprinting method for the electrochemical rapid residue detection of imidacloprid. This paper selected reduced graphene oxide and gold nanoparticles as modifiers modified on screen-printed carbon electrodes (SPCE) chitosan as a functional monomer, and imidacloprid as template molecule to prepare molecularly imprinted polymer, and applied this sensor to the residue detection of imidacloprid. The results showed that the concentration of imidacloprid showed a good linear relationship with the peak response current, and the detection limit of imidacloprid was 0.5 μM, while the sensor had good repeatability and interference resistance. The recoveries of imidacloprid spiked on three samples, mango, cowpea and water, were in the range of 90-110% (relative standard deviation, RSD<5%), which proved the practicality and feasibility of the assay established in this paper. The results of this paper can be used as a basis for the research on the detection of imidacloprid pesticide residues in food or environment.

Recent Advances on Detection of Insecticides Using Optical Sensors

Insecticides are enormously important to industry requirements and market demands in agriculture. Despite their usefulness, these insecticides can pose a dangerous risk to the safety of food, environment and all living things through various mechanisms of action. Concern about the environmental impact of repeated use of insecticides has prompted many researchers to develop rapid, economical, uncomplicated and user-friendly analytical method for the detection of insecticides. In this regards, optical sensors are considered as favorable methods for insecticides analysis because of their special features including rapid detection time, low cost, easy to use and high selectivity and sensitivity. In this review, current progresses of incorporation between recognition elements and optical sensors for insecticide detection are discussed and evaluated well, by categorizing it based on insecticide chemical classes, including the range of detection and limit of detection. Additionally, this review aims to provide powerful insights to researchers for the future development of optical sensors in the detection of insecticides.

Recent developments in non-enzymatic (bio)sensors for detection of pesticide residues: Focusing on antibody, aptamer and molecularly imprinted polymer

The utilization of pesticides has been increased in recent years due to population growth and increasing urbanization. The constant use of pesticides has resulted in contamination of the environment and agricultural products with serious human health concerns associated with their use. Therefore, detection and quantification of pesticides by sensitive and selective methods is highly required in food safety management. Traditional detection methods cannot realize highly sensitive, selective and on-site detection, which limits their application. (Bio)sensors and (bio)assays are emerging tools with unique properties such as rapid, sensitive, efficient and portable detection. Among them, enzyme-based biosensors have been widely developed and some have even been commercialized. However, they suffer from some limitations such as instability and low reproducibility that originate from the nature of enzyme. Non-enzymatic (bio)sensors overcome the current limitations of enzyme-based detection methods and provide great potential for efficient, highly sensitive and low-cost detection assays using smart and miniaturized devices. In this study, we provide an overview of recent advances and new trends in optical and electrochemical non-enzymatic (bio)sensors for the detection of pesticides by focusing on antibody, aptamer and molecularly imprinted polymer (MIP) as recognition elements. Performance, advantages and drawbacks of the developed (bio)sensors are discussed well. The main advantage these recognition elements is their stability over an extended period of time compared to the enzymes. Furthermore, the combination of nanomaterials in these (bio)sensors can significantly improve their performance.

Development of a quantum dot nanobead-based fluorescent strip immunosensor for on-site detection of aflatoxin B1 in lotus seeds

Owing to the serious threat of aflatoxin B₁ (AFB₁) to public health, development of a reliable method for accurate determination of it is extremely necessary and urgent. In this study, a simple, rapid and highly-sensitive quantum dot nanobeads (QBs) based lateral flow fluorescent strip immunosensor was developed for on-site detection of AFB₁ in edible and medicinal lotus seeds. Carboxylated QBs were used as the fluorescent markers to prepare the fluorescent probe through coupling QBs with anti-AFB1 antibodies. Bovine serum albumin (BSA)-AFB₁ antigens and goat anti-mouse IgG antibodies were coated on the nitrocellulose (NC) membrane to prepare the test (T) and control (C) lines, respectively. Qualitative analysis of AFB₁ was realized by naked eye, and the quantitative determination was achieved with a portable strip reader. Results showed that the newly-developed test strip sensor could achieve rapid detection of AFB₁ within 15 min, allowing a limit of detection (LOD) of 1 ng/mL (2 μg/kg) and a linear range of 1-19 ng/mL (2-38 μg/kg). Recovery rates from the fortified lotus seeds with low, medium and high spiking concentrations (2.5, 5 and 10 μg/kg) ranged from 94.0% to 116.0% with relative standard deviations less than 10%. All the results were confirmed by a standard LC-MS/MS method. The QBs-based fluorescent strip immunosensor with high sensitivity, easy operation, and low cost provided a preferred solution for rapid, on-site screening and highly-sensitive quantitation of AFB₁ in a large number of lotus seed samples.

Optical Screening Methods for Pesticide Residue Detection in Food Matrices: Advances and Emerging Analytical Trends

Pesticides have been extensively used in agriculture to protect crops and enhance their yields, indicating the need to monitor for their toxic residues in foodstuff. To achieve that, chromatographic methods coupled to mass spectrometry is the common analytical approach, combining low limits of detection, wide linear ranges, and high accuracy. However, these methods are also quite expensive, time-consuming, and require highly skilled personnel, indicating the need to seek for alternatives providing simple, low-cost, rapid, and on-site results. In this study, we critically review the available screening methods for pesticide residues on the basis of optical detection during the period 2016-2020. Optical biosensors are commonly miniaturized analytical platforms introducing the point-of-care (POC) era in the field. Various optical detection principles have been utilized, namely, colorimetry, fluorescence (FL), surface plasmon resonance (SPR), and surface enhanced Raman spectroscopy (SERS). Nanomaterials can significantly enhance optical detection performance and handheld platforms, for example, handheld SERS devices can revolutionize testing. The hyphenation of optical assays to smartphones is also underlined as it enables unprecedented features such as one-click results using smartphone apps or online result communication. All in all, despite being in an early stage facing several challenges, i.e., long sample preparation protocols or interphone variation results, such POC diagnostics pave a new road into the food safety field in which analysis cost will be reduced and a more intensive testing will be achieved.

Development of Fluorescence Polarization Immunoassay for Imidacloprid in Environmental and Agricultural Samples

A fluorescence polarization immunoassay (FPIA) for the determination of imidacloprid (IMI) was developed with advantages of simple operation and short assay time. The haptens of IMI, acetamiprid (ACE), and thiamethoxam (THI) were conjugated with fluorescein isothiocyanate ethylenediamine (EDF) and 4'-Aminomethyl fluorescein (AMF), respectively, to prepare six fluorescence tracers. The conjugation of IMI hapten and EDF (IMI-EDF) was selected to develop the FPIA due to the largest fluorescent polarization value increase in the presence of anti-IMI monoclonal antibody. Under the optimum condition, the limit of detection, 50% inhibition concentration and detection range of the FPIA were 1.7, 4.8, and 1.7-16.3 μg/L, respectively. The cross-reactivities (CRs) with the analogs of IMI were negligible except for imidaclothiz with CR of 79.13%. The average recovery of spiked paddy water, corn and cucumber samples were 82.4-118.5% with the RSDs of 7.0-15.9%, which indicated the FPIA had good accuracy. Thus, the developed FPIA was a potential tool for the rapid and accurate determination of IMI in agricultural and environmental samples.

Europium nanosphere-based fluorescence strip sensor for ultrasensitive and quantitative determination of fumonisin B1

Contamination of grains and related products by fumonisins (FBs) is increasingly becoming a serious food security issue. The aim of this work was to develop a europium fluorescent microsphere-based time-resolved fluorescence immunochromatographic assay (TRFICA) for FB₁ detection in different grains, including corn, corn flour, wheat, rice and brown rice. Standard curves for the five types of grain matrix were established, and showed good linearity (R² > 0.975), LOD of 8.26 μg kg^-1, and a wide working range of 13.81-1000 μg kg^-1. The recoveries of TRFICA for FB₁ detection ranged from 82.85-103.62% with variation coefficients of 1.92-15.33%. Two corn reference materials and other natural samples were tested using TRFICA. The same samples analyzed by liquid chromatography tandem mass spectrometry further confirmed the TRFICA results. The entire detection time of TRFICA was within 30 min. Thus, this developed TRFICA can be used for onsite detection and quantitation of FB₁ in grains.

Ultrasensitive label-free immunochromatographic strip sensor for Salmonella determination based on salt-induced aggregated gold nanoparticles

Here we present an innovative label-free immunochromatographic strip (ICTS) sensor, in which salt-induced aggregated gold nanoparticles (SIA-AuNPs) act as the signal probe, allowing in 14 min the identification and sensitive quantification of Salmonella as model targets. It has been evidenced that SIA-AuNPs could be absorbed on the surface of bacteria based on van der Waals forces. The SIA-AuNPs@Salmonella complex was captured by anti-Salmonella polyclonal antibody deposited on the test zone. With the label-free ICTS sensor, we successfully detected Salmonella in a concentration range of 10³-10⁸ CFU/mL and a visual detection limit of 1 × 10³ CFU/mL. The band of test zone could be distinguished at a concentration of 10³ CFU/mL by naked eye, which is 100-fold lower than the cationic AuNPs based method. The strip sensor was further validated with real samples including cabbage and drinking water with excellent precision and showed to provide excellent recovery.

Tutorial: design and fabrication of nanoparticle-based lateral-flow immunoassays

Lateral-flow assays (LFAs) are quick, simple and cheap assays to analyze various samples at the point of care or in the field, making them one of the most widespread biosensors currently available. They have been successfully employed for the detection of a myriad of different targets (ranging from atoms up to whole cells) in all type of samples (including water, blood, foodstuff and environmental samples). Their operation relies on the capillary flow of the sample throughout a series of sequential pads, each with different functionalities aiming to generate a signal to indicate the absence/presence (and, in some cases, the concentration) of the analyte of interest. To have a user-friendly operation, their development requires the optimization of multiple, interconnected parameters that may overwhelm new developers. In this tutorial, we provide the readers with: (i) the basic knowledge to understand the principles governing an LFA and to take informed decisions during lateral flow strip design and fabrication, (ii) a roadmap for optimal LFA development independent of the specific application, (iii) a step-by-step example procedure for the assembly and operation of an LF strip for the detection of human IgG and (iv) an extensive troubleshooting section addressing the most frequent issues in designing, assembling and using LFAs. By changing only the receptors, the provided example procedure can easily be adapted for cost-efficient detection of a broad variety of targets.

Rapid quantification of artemisinin derivatives in antimalarial drugs with dipstick immunoassays

Substandard antimalarial drugs will result in unsatisfied therapeutic efficacy and increase the risk of resistance development. The point-of-care, qualitative, or semi-quantitative dipstick immunoassays cannot differentiate the substandard drugs with confidence. A rapid and quantitative analytical method that can be used under field conditions is needed. Here, three lateral flow immunoassays (LFIAs) based on colloidal gold nanobeads (CGN) as labels were developed for quantification of artemether, dihydroartemisinin and artesunate contents in antimalarial drugs with the aid of a portable optical scanner. Also, time-resolved fluorescent nanobeads (TRFN)-LFIA, coupled with a portable fluorescent lateral flow reader, was developed for quantification of artesunate. Commercial antimalarial drugs were used to validate these LFIAs with comparison to the gold standard high-performance liquid chromatography (HPLC) method. The drug contents estimated with these CGN-LFIAs were in the range of 85.5-109.3% of the contents determined by HPLC with a coefficient of variation (CV) of 4.5-13.0%. The TRFN-LFIA results were in the range of 93.7-108.4% of contents determined by HPLC with a CV of 5.2-8.9%. There were no significant differences between the results of CGN-LFIA and TRFN-LIFA (P = 0.5277, t-test). Both types of LFIAs with portable readers may be used for quantitation of active ingredients in antimalarial drugs and for screening substandard antimalarial drugs in resource-limiting settings.

A sensitive immunoassay based on fluorescence resonance energy transfer from up-converting nanoparticles and graphene oxide for one-step detection of imidacloprid

In this study, a fluorescence resonance energy transfer (FRET) immunoassay based on graphene oxide (GO) and up-converting nanoparticles (UCNPs) was established for rapid detection of imidacloprid, a commonly-used insecticide. Under 980 nm near-infrared light excitation, emission of UCNPs at 542 nm can be absorbed by the energy acceptor GO. The carboxyl-functionalized GO and UCNPs were coupled with competitive antigen and antibody against imidacloprid. After optimization, the FRET immunoassay showed a wide detection range of 0.08-50 ng/mL to imidacloprid, with cross-reaction toward other three neonicotinoids including imidaclothiz (74.4%), thiacloprid (36.9%) and clothianidin (31.9%). The average recoveries of spiked water, Chinese cabbage, cucumber, honey and tea samples were 76.8%-101.8%. The accuracy and reliability of the FRET immunoassay were verified by UPLC-MS/MS with a good correlation (R² = 0.9816). In a summary, this study provides a sensitive and one-step method for monitoring imidacloprid residue in food and environmental samples within 1 h.