Sensitive determination of phenylurea herbicides in soybean milk and tomato samples by a novel hypercrosslinked polymer based solid-phase extraction coupled with high performance liquid chromatography

In situ formation of solidified supramolecular solvent based dispersive liquid-liquid microextraction for the enrichment of phenylurea herbicides in water, fruit juice, and milk

A convenient, efficient, and green dispersive liquid-liquid microextraction based on the in situ formation of solidified supramolecular solvents combined with high performance liquid chromatography was developed for the determination of four phenylurea herbicides in liquid samples, including monuron, monolinuron, isoproturon, and chlortoluron. Herein, a novel supramolecular solvent was prepared by the in situ reaction of [P4448]Br and NH4PF6, which had the advantages of low melting point, high density, and good dispersibility. In addition, the microscopic morphology and physical properties of supramolecular solvent were characterized, and the extraction conditions were optimized. The results showed that the analytes had good linearity (R2 > 0.9998) within the linear range. The limits of detection and quantification for the four phenylurea herbicides were in the range of 0.13-0.19 μg L-1 and 0.45-0.65 μg L-1, respectively. The prepared supramolecular solvent is suitable for the efficient extraction of phenylurea herbicides in water, fruit juice, and milk.

Preparation of ionic porous polymers for extraction of four phenolic endocrine disrupting chemicals from fish and water samples

In this paper, series of ionic polymers were synthesized by crosslinking alkyl quaternary ammonium salts with 1,4-bis(chloromethyl)benzene. Among them, hyper-crosslinked polymer fabricated with dodecyl dimethyl benzyl ammonium chloride (HCP-DD) as monomer delivered superior adsorption performance for endocrine disrupting chemicals (EDCs). The adsorption mechanism mainly includes π-π stacking, hydrophobic and electrostatic interaction. With HCP-DD as solid phase extraction sorbent, a high performance liquid chromatography-diode array detection method was developed for the detection of four phenolic EDCs in water and fish samples. The detection limits of the method were 0.005-0.02 ng mL-1 for water samples and 3-30 ng g-1 for fish samples. The recoveries of EDCs in water samples and fish samples were 80-119% and 81.3-117% (relative standard deviations <4.4%), respectively. The study not only provides a route for preparation ionic porous polymers, but also highlights the applications of ionic polymers as efficient adsorbent to enrich organic pollutants.

Facile construction of a stable core-shell spherically magnetic polyimide covalent organic framework for efficient extraction of phenylurea herbicides

Efficient enrichment is crucial for the highly sensitive monitoring of phenylurea herbicides (PUHs) in various environmental waters. In this work, a stable core-shell spherically magnetic polyimide covalent organic framework (COF) was synthesized via a simple template-mediated precipitation polymerization method under mild conditions using tri(4-aminophenyl)amine (TAPA) and 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) as the building units (denoted as Fe3O4@TAPA-BPDA). The Fe3O4@TAPA-BPDA exhibits remarkable adsorption performance for PUHs with an optimized adsorption time of only 10 min. The adsorption of PUHs by Fe3O4@TAPA-BPDA followed the pseudo-second-order kinetic model and the Langmuir model. Furthermore, hydrogen bonding, halogen bonding, hydrophobic interaction, electro donor-acceptor interaction and π-π interactions are identified as the dominant mechanisms contributing to excellent adsorption performance. It was demonstrated that halogen bonds play an important role in the adsorption of substances containing chlorine atoms. The Fe3O4@TAPA-BPDA is easy to operate and highly regenerable. A simple magnetic solid-phase extraction (MSPE) method based on the Fe3O4@TAPA-BPDA was then developed for the rapid extraction of five PUHs in real samples, coupled with high-performance liquid chromatography (HPLC) determination. The analytical method developed has a linear range of 0.5-50 ng/mL, and the limit of detection (LOD) ranges from 0.06 to 0.10 ng/mL. The method exhibits good accuracy with recoveries ranged from 74.5 % to 111.4 %. The analytical method was successfully applied to the highly sensitive detection of PUHs in environmental water samples, which highlighting the potential application of the Fe3O4@TAPA-BPDA in the sample pretreatment.

Versatile Hyper-Cross-Linked Polymers Derived from Waste Polystyrene: Synthesis, Properties, and Intentional Recycling

Waste polystyrene contributes considerably to environmental pollution due to its persistent nature, prompting a widespread consensus on the urgent need for viable recycling solutions. Owing to the aromatic groups structure of polystyrene, hyper-cross-linked polymers can be synthesized through the Friedel-Crafts cross-linking reaction using Lewis acids as catalysts. In addition, hyper-cross-linked polystyrene and its carbonaceous counterparts can be used in several important applications, which helps in their efficient recycling. This review systematically explores methods for preparing multifunctional hyper-cross-linked polymers from waste polystyrene and their applications in sustainable recycling. We have comprehensively outlined various synthetic approaches for these polymers and investigated their physical and chemical properties. These multifunctional polymers not only exhibit structural flexibility but also demonstrate diversity in performance, making them suitable for various applications. Through a systematic examination of synthetic methods, we showcase the cutting-edge positions of these materials in the field of hyper-cross-linked polymers. Additionally, we provide in-depth insights into the potential applications of these hyper-cross-linked polymers in intentional recycling, highlighting their important contributions to environmental protection and sustainable development. This research provides valuable references to the fields of sustainable materials science and waste management, encouraging further exploration of innovative approaches for the utilization of discarded polystyrene.

Preparation of hypercrosslinked porous polymer with manifold functional groups for sensitive determination of phenylurea herbicides in beverages and celtuce samples

Wide use of phenylurea herbicide has caused serious residue problem and threaten human health. It is important to develop viable method for their sensitive determination. Herein, a multi-functionalized porous polymer was prepared by crosslinking hexafluorobisphenol A with pyromellitic dianhydride. Using the multi-functionalized porous polymer as solid phase extraction sorbent, combined with high performance liquid chromatography, a sensitive method was established for determining phenylurea herbicides in beverages and celtuces. High sensitivity was achieved, with method detection limit (S/N = 3) of 0.01---0.025 ng mL-1 for beverages, 1.70 ng g-1 for celtuce, and quantitation limits of 0.03---0.10 ng mL-1 for beverages, 5.00 ng g-1 for celtuce. The method recoveries were 80.5---120.0 % with relative standard deviations lower than 6.1%. Adsorption mechanism mainly involved F-π, F-O, π-π, polar interactions and hydrogen-bonding interactions. This study offers a simple protocol to develop multi-functional sorbents for extraction of organic pollutants.

Unusual 3,4-Oxidative Coupling Polymerization on 1,2,5-Trisubstituted Pyrroles for Novel Porous Organic Polymers

Porous organic polymers (POPs) have demonstrated promising task-specific applications due to their structure designability and thus functionality. Herein, an unusual 3,4-polymerization on 1,2,5-trisubstituted pyrroles has been developed to give linear polypyrrole-3,4 in high efficiency, with Mn of 20000 and PDI of 1.7. This novel polymerization technique was applied to prepare a series of polypyrrole-based POPs (PY-POP-1-4), which exhibited high BET surface areas (up to 762 m2 g-1) with a meso-micro-supermicro hierarchically porous structure. Furthermore, PY-POPs were doped in the mixed matrix membranes based on the polysulfone matrix to enhance the gas permeability and gas pair selectivity, with H2/N2 selectivity up to 84.6 and CO2/CH4 and CO2/N2 selectivity up to 46.8 and 39.6.

Carboxyl functionalized sorbent based solid-phase extraction for sensitive determination of endocrine disrupting chemicals in bottled water, juice and milk

Endocrine disrupting chemicals (EDCs) pose a serious threat to human health even at extremely low concentration. Three carboxyl functionalized porous polymers (PDA-DPBP, PTCDA-DPBP and ODPA-DPBP) were synthesized for the first time and employed as solid-phase extraction sorbent to enrich phenolic EDCs at trace level. Compared with PTCDA-DPBP, ODPA-DPBP and corresponding carboxyl-free counterpart (PC-DPBP), PDA-DPBP delivered superior enrichment efficiency for the phenolic EDCs, which can be ascribed to the strong hydrogen bonding, pore filling, hydrophobic interaction and π-π interaction between PDA-DPBP and phenolic EDCs. Coupled with high performance liquid chromatography, phenolic EDC residues in bottled water, juice and milk samples were enriched and determined. At the optimum conditions, the PDA-DPBP based method provided a good linear response in the range of 0.04-100ng mL-1 for bottled water, 0.07-100ng mL-1 for juice and 0.15-500ng mL-1 for milk samples. The detection limits (S/N=3) were 0.01-0.04, 0.02-0.06 and 0.05-0.10ng mL-1 for bottled water, juice and milk, respectively. The method recoveries were in the range from 81.6% to 116%, with RSDs ≤ 7.7%. This work provides an attractive and reliable alternative method for sensitive determination of phenolic EDCs.

Green construction of hydroxyl-functionalized magnetic porous organic framework for effective extraction of triazine herbicides from environmental water and watermelon juice samples

Triazine herbicides have been widely detected in water resources and food, which poses a potential hazard to both ecosystem and human health. Due to their high polarity, conventional adsorbents have limitations for their extractions. Herein, for the effective magnetic extraction of triazine herbicides, a novel and effective magnetic adsorbent was prepared with a satisfactory extraction performance. In the experiments, five porous organic frameworks (POFs) with hydroxyl functional groups were synthesized by diazo-coupling reactions in aqueous solution with β-cyclodextrin (β-CD) as a green monomer. After evaluation of the five POFs, the DDM-CD-POF, which was synthesized with 4'4-diaminodiphenylmethane (DDM) and β-CD, showed the largest specific surface area and the best adsorption capacity for the five triazine herbicides. Then, it was magnetized by introducing Fe₃O₄@SiO₂ into it to prepare a magnetic adsorbent (M-DDM-CD-POF) to facilitate separation and recycling. Finally, the M-DDM-CD-POF-based magnetic solid-phase extraction in combination with high performance liquid chromatographic detection method was established for the quantitative determination of the triazine herbicides in environmental water and watermelon juice samples. The current strategy showed low limits of detection of 0.03-0.11 ng mL^-1 for environmental water and 0.07-0.22 ng mL^-1 for watermelon juice sample. The method recoveries for spiked samples ranged from 84.0% to 113.0% with the relative standard deviations ≤8.8%. This work provides a new approach for the detection of the triazine herbicides with good application prospect.

Urea-based magnetic porous organic frameworks as novel adsorbent for the enrichment of phenylurea herbicides in foods

A novel urea-based magnetic porous organic frameworks Fe₃O₄@UPOFs (ETTA-PPDI) was synthesized by a simple polymerization reaction under mild conditions. The adsorbent displayed desirable adsorption performance for phenylurea herbicides (PUHs) with optimized adsorption time of only 4 min. The adsorption capacities of the adsorbent for PUHs ranged from 47.30 to 111.93 mg g^-1. A magnetic solid-phase extraction based on Fe₃O₄@UPOFs combined with high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established for the efficient determination of six PUHs in food samples (wheat, edible oil and cucumber), with determination coefficient (R²) ≥ 0.9972. The LODs of the method were in the range of 0.003-0.07 μg kg^-1 and recoveries ranged from 82.00 to 112.53%. The relative standard deviations were lower than 6.7%. The newly prepared adsorbent displayed great application prospects for the efficient enrichment of trace phenylurea herbicides in complex food matrices.

Facile synthesis of magnetic hypercrosslinked polymer for the magnetic solid-phase extraction of benzoylurea insecticides from honey and apple juice samples

In this work, a novel knitting aromatic polymer (KAP) was fabricated for the first time by knitting ferrocene with 1,3,5-tris(bromomethyl)-2,4,6-trimethylbenzene via Friedel-Crafts reaction, and then the KAP was magnetically functionalized with Fe₃O₄ nanoparticles to produce a magnetic KAP (M-KAP). Combining M-KAP based magnetic solid-phase extraction with high performance liquid chromatography-ultraviolet detection, a simple and sensitive method was developed for simultaneous determination of six benzoylurea insecticides (BUs) in honey and apple juice samples. In the optimized conditions, a good linearity for the BUs existed in the range of 1.67-1000 ng g^-1 for honey sample and 0.500-100.0 ng mL^-1 for apple juice sample. The limits of detection were 0.500-1.50 ng g^-1 and 0.150-0.400 ng mL^-1 for honey and apple juice sample, respectively. Satisfactory recoveries were in the range of 85.5-105.5% with RSDs ≤ 8.3%. The developed method demonstrated an excellent practicability for sensitive analysis of the BUs.

Synthesis of nitrogen-rich magnetic hypercrosslinked polymer as robust adsorbent for the detection of neonicotinoids in honey, tomatoes, lettuce and Chinese cabbage

In this study, a novel nitrogen-rich magnetic hypercrosslinked polymer (Fe3O4@Ph-HCP) was fabricated via a facile one-pot reaction of 1,3,5-triphenylbenzene, 2,4-dichloropyrimidine and phenyl-functionalized magnetic Fe3O4 nanoparticles. The Fe3O4@Ph-HCP possessed high specific surface, abundant nanopores and good stability. Especially, Fe3O4@Ph-HCP exhibited excellent adsorption capability with fast adsorption rate to neonicotinoid insecticides. It was applied as a superior magnetic adsorbent for rapid enrichment and isolation of four neonicotinoid insecticides (thiamethoxam, imidacloprid, acetamiprid and thiacloprid) from honey, tomato, lettuce and Chinese cabbage samples prior to high performance liquid chromatography-diode array detection. Under the optimized conditions, the good linearity was obtained in the range of 1-1000 ng g-1 for honey, tomato, lettuce and Chinese cabbage samples, and the detection limits (S/N = 3) were 0.30-0.67 ng g-1 for honey, 1-1.5 ng g-1 for tomato, lettuce and Chinese cabbage. The spiked recoveries were 80.1-111%, and relative standard deviations were less than 10.0%. These results demonstrate that the developed method can be used as a good alternative method for sensitive determination of neonicotinoid insecticides in complex samples.

Sensitive and selective electrochemical determination of uric acid in urine based on ultrasmall iron oxide nanoparticles decorated urchin-like nitrogen-doped carbon

Hypercrosslinked pyrrole was synthesized via the Friedel-Crafts reaction and then carbonized to obtain urchin-like nitrogen-doped carbon (UNC). Ultrasmall iron oxide nanoparticles were then supported on UNC, and the composite was used to prepare an electrochemical sensor for detecting uric acid (UA) in human urine. Fe_xO_y/UNC was characterized and analyzed via scanning electron microscopy, transmission electron microscopy, energy dispersive spectrometry, X-ray diffraction, and X-ray photoelectron spectroscopy. A glassy carbon electrode (GCE) modified with Fe_xO_y/UNC was used as an electrochemical sensor to effectively identify UA. The electrochemical behavior of the Fe_xO_y/UNC-based UA sensor was studied using differential pulse stripping voltammetry, and the optimal conditions were determined by changing the amount of Fe_xO_y/UNC, pH of the buffer solution, deposition potential, and deposition time. Under optimal conditions, the Fe_xO_y/UNC-based electrochemical sensor detected UA in the range of 2-200 μM, where the limit of detection (LOD) for UA was 0.29 μM. Anti-interference experiments were performed, and the sensor was applied to the actual analysis of human urine samples. Urea, glucose, ascorbic acid, and many cations and anions present at 100-fold concentrations relative to UA did not strongly interfere with the response of the sensor to UA. The Fe_xO_y/UNC electrochemical sensor has high sensitivity and selectivity for uric acid in human urine samples and can be used for actual clinical testing of UA in urine.

Sensitive determination of auxins in environmental water and peach beverage by hyper crosslinked polymer-based solid-phase extraction with high performance liquid chromatography-fluorescence detection

As plant regulators, auxins can promote plant growth. However, they have toxicity and may cause harm to humans. Due to their low concentrations in food sample matrices, the enrichment and analysis of trace auxins in food samples is a challenging work. In this work, a series of hyper crosslinked polymers (HCPs) were synthesized by Friedel-Crafts acylation to extract four auxins (indole-3-acetic acid, indole-3-propionic acid, indole-3-butyric acid and 1-naphthylacetic acid). Among these HCPs, the QP-TC-HCP, synthesized from p-quaterphenyl (QP) and terephthaloyl chloride (TC), showed the best adsorption performance for the auxins. It was then applied as the adsorbent for the solid-phase extraction of the auxins from environmental water and peach beverage samples, followed by high performance liquid chromatography-fluorescence detection. Under the optimized conditions, the limits of detection were 3.0-12.0 pg mL^-1 for environmental water and 18.0-36.0 pg mL^-1 for peach beverage sample. The method recoveries of the auxins for the spiked samples were in the range of 85.0-110.0%. The established method provided an alternative approach for the determination of auxins in food samples. In addition, different types of organic compounds were tested for the extraction by the QP-TC-HCP to assess its application potential and adsorption mechanism. It was concluded that the QP-TC-HCP had better extraction performance for the compounds with certain hydrophilicity and more hydrogen bonding sites.

Construction of hydrophilic hypercrosslinked polymer based on natural kaempferol for highly effective extraction of 5-nitroimidazoles in environmental water, honey and fish samples

A series of novel hydroxyl-functional hypercrosslinked polymers (named as HCPs-Kae) were fabricated using natural and environmentally benign kaempferol as monomer via one-step Friedel-Crafts reaction. The prepared HCP-Kae1-24 h exhibited large surface area, good hydrophilicity and excellent adsorption performance to 5-nitroimidazoles (5-NDZs). Thus, by applying HCP-Kae1-24 h as a solid-phase extraction adsorbent, a sensitive method was developed for enrichment of 5-NDZs including metronidazole, ronidazole, secnidazole, dimetridazole and ornidazole prior to high performance liquid chromatography analysis. Under the optimum conditions, good linearities were achieved in the range of 0.10-100.0 ng mL^-1 for water, 1.3-500.0 ng g^-1 for honey, and 1.7-100.0 ng g^-1 for fish meat. The detection limits of the method were 0.03-0.05 ng mL^-1, 0.4-1.0 ng g^-1, 0.5-1.0 ng g^-1 for water, honey and fish meat, respectively. High method recovery was obtained in the range of 84-118% with relative standard deviations lower than 8.9%. The established method was successfully applied to the detection of 5-NDZs in environmental water, honey and fish samples. This work provides a new strategy for constructing hydroxyl-functional HCPs by using natural resource as robust adsorbent for adsorption/extraction applications.

Fabrication of carbonyl-functional hypercrosslinked polymers as solid-phase extraction sorbent for enrichment of chlorophenols from water, honey and beverage samples

Three carbonyl-functional novel hypercrosslinked polymers (HCP-TPS, HCP-TPA, and HCP-TPP) were successfully fabricated through an one-step Friedel-Crafts acylation reaction by copolymerizing paraphthaloyl chloride with triphenylsilane, triphenylamine, and triphenylphosphine, respectively. The resultant HCPs contained plenty of carbonyl-functional groups. Among the series of such HCPs, HCP-TPS displayed the best adsorption capability to chlorophenols (CPs), and thus it was employed as solid-phase extraction (SPE) adsorbent for enrichment of chlorophenols from water, honey, and white peach beverage prior to determination by high-performance liquid chromatography. Under the optimal conditions, the detection limits of the method (S/N = 3) were 0.15-0.3 ng mL^-1 for tap water and leak water, 2.5-6.0 ng g^-1 for honey sample and 0.4-0.6 ng mL^-1 for white peach beverage sample. The recoveries of CPs in the spiked water, honey samples, and white peach beverage were in the range of 89.0-108.4%, 81.4-118.2%, and 85.0-113.5%, respectively. This work provides a new strategy for constructing functionalized HCPs as efficient SPE adsorbents. In this work, three novel hypercrosslinked polymers (HCPs) were synthesized by the Friedel-Crafts alkylation reaction (paraphthaloyl chloride as the alkylating agent, triphenylsilane, triphenylamine, and triphenylphosphine as the aromatic units). Then, HCP-TPS was applied to soild-phase extraction sorbent for enrichment CPs from water, honey, and white peach beverage samples.

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.

A magnetic MOF derivative with rich interactions formed under mild preparation conditions for the extraction of non-steroidal anti-inflammatory drugs from the Yellow River

For sorbents, good magnetic properties and rich interactions with targets are important ways to improve the efficiency of magnetic solid-phase extraction (MSPE). The magnetic MOF-101 derivative (MD) was obtained by heat-treating MOF-101 at different temperatures. After a series of characterizations, it was found that MD-350 had the best magnetic properties and retained more functional groups of the original MOF-101, and had better extraction efficiency as compared to MD obtained under other treatment temperatures for the MSPE of four non-steroidal anti-inflammatory drugs (NSAIDs) in water samples, coupled with high-performance liquid chromatography (HPLC). The remaining functional groups of MD-350 can produce more interactions with NSAIDs, such as hydrogen bonding, π-π conjugation, and coordination interactions; good magnetic properties facilitate the separation of the sorbent and the solution. These advantages indicate that the established extraction method demonstrated satisfactory extraction performance: an excellent recovery rate (96.73-100.61%) with a short extraction time (15 min), a wide linear range (4-400 μg L-1) with a determination coefficient of 0.9975-0.9993, a low LOD of 0.2-0.5 μg L-1 and up to 12 times service-life without the loss of the recovery rate. Satisfactory results were also obtained in extracting NSAIDs from Yellow River. All these results indicate that MD-350 prepared under mild conditions has potential as an MSPE sorbent to detect and remove NSAIDs from environmental waters with high efficiency and long service life.

Facile synthesis of uniform spherical covalent organic frameworks for determination of neonicotinoid insecticides

A uniform spherical structure covalent organic framework (TAPA-BPDA-COF) was prepared by a facile method at room temperature with tris(4-aminophenyl)amine (TAPA) and 4,4'-biphenyldicarboxaldehyde (BPDA) as building blocks. Based on the solid phase extraction with the TAPA-BPDA-COF as the sorbent and high performance liquid chromatography-diode array detection, a sensitive analytical method was established for the determination of four neonicotinoid insecticides from water and honey samples. Under the optimum conditions, good linear response for the quantification of the analytes was achieved in the range of 0.3-50.0 ng mL^-1 for water samples and in the range of 8.0-500.0 ng g^-1 for honey samples. The method recoveries fell in the range of 80.0-121.9% with RSDs less than 7.6%. The limits of detection at the signal to noise ratio of 3 were measured to be in the range of 0.08-0.12 ng mL^-1 for water samples and 2.6-3.3 ng g^-1 for honey samples, depending on compounds.

Current Strategies for Studying the Natural and Synthetic Bioactive Compounds in Food by Chromatographic Separation Techniques

The present study summarizes the new strategies including advanced equipment and validation parameters of liquid and gas chromatography methods i.e., thin-layer chromatography (TLC), column liquid chromatography (CLC), and gas chromatography (GC) suitable for the identification and quantitative determination of different natural and synthetic bioactive compounds present in food and food products, which play an important role in human health, within the period of 2019–2021 (January). Full characteristic of some of these procedures with their validation parameters is discussed in this work. The present review confirms the vital role of HPLC methodology in combination with different detection modes i.e., HPLC-UV, HPLC-DAD, HPLC-MS, and HPLC-MS/MS for the determination of natural and synthetic bioactive molecules for different purposes i.e., to characterize the chemical composition of food as well as in the multi-residue analysis of pesticides, NSAIDs, antibiotics, steroids, and others in food and food products.

In-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid for the simultaneous determination of triazine and phenylurea pesticide in vegetable protein drinks

A novel in-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid (in-syringe TC-LLME-SFIL) combined with high performance liquid chromatography was developed for the simultaneous determination of monuron, chlorotoluron, atrazine, monolinuron, propazine and prometryn in commercial vegetable protein drinks. The samples were deproteinized by trichloroacetic acid and further cleaned up by solid phase extraction column. The ionic liquid tributyldodecylphosphonium tetrafluoroborate ([P_{4 4 4 12}]BF₄) was used as extraction solvent and dispersed into the depurated sample solution to form fine droplets with the assistance of heating and vortex. With the help of an ice bath, the ionic liquid phase solidified and floated on the surface of aqueous phase. After separation from the aqueous phase, the solidified ionic liquids were dissolved with acetonitrile and the resulting solution was analyzed by high performance liquid chromatography. Some extraction parameters, including type and amount of adsorbent, type and amount of ionic liquids, amount of NaCl, melting temperature and time of ionic liquid, vortex time, pH of sample solution, ice bath temperature and time, were investigated and optimized by single-factor experiment, Plackett-Burman design and Box-Behnken design. The results showed that good linearities (r ≥ 0.9994) were obtained in the concentration range of 7.8-1000.0 μg/L. The limits of detection and quantification were in the range of 0.25-2.59 μg/L and 0.82-8.63 μg/L, respectively. The spiked recoveries were 81.26-118.42% with the relative standard deviation (RSD, n = 3) lower than 8.17%. The present method was successfully applied to the simultaneous determination of triazine and phenylurea herbicides in vegetable protein drinks.

Simultaneous determination of eight biogenic amines in the traditional Chinese condiment Pixian Douban using UHPLC-MS/MS

A UHPLC-MS/MS method was developed to simultaneously determine eight biogenic amines (BAs) in Pixian Douban. Under optimal conditions, the linear ranges of determination were 5-1000 μg/L (that of spermine was 8-1000 μg/L). Correlation coefficients ranged from 0.9955 to 0.9987. The limits of detection were 0.11-5.5 μg/L. The matrix effect and analytical performance of the present method were evaluated, and the eight BAs were analyzed by this method in 19 samples, indicating the potential pollution of BAs in chili oil Pixian Douban.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Fast and Low-Cost Surface-Enhanced Raman Scattering (SERS) Method for On-Site Detection of Flumetsulam in Wheat

The pesticide residues in agri-foods are threatening people’s health. This study aims to establish a fast and low-cost surface-enhanced Raman scattering (SERS) method for the on-site detection of flumetsulam in wheat. The two-step modified concentrated gold nanoparticles (AuNPs) acted as the SERS substrate with the aid of NaCl and MgSO₄. NaCl is served as the activator to modify AuNPs, while MgSO₄ is served as the aggregating agent to form high-density hot spots. The activation and aggregation are two essential collaborative procedures to generate remarkable SERS enhancement and achieve the trace-level detection of flumetsulam. This method exhibits good enhancement effect with an enhancement factor of 10⁶ and wide linear range (5–1000 μg/L). With simple pretreatment, the flumetsulam residue in real wheat samples can be successfully detected with the limit of detection (LOD) down to 0.01 μg/g, which is below the maximum residue limit of flumetsulam in wheat (0.05 μg/g) set in China. The recovery of flumetsulam residue in wheat ranges from 88.3% to 95.6%. These results demonstrate that the proposed SERS method is a powerful technique for the detection of flumetsulam in wheat, which implies the great application potential in the rapid detection of other pesticide residues in various agri-foods.