Combination of magnetic solid-phase extraction and HPLC-UV for simultaneous determination of four phthalate esters in plastic bottled juice

β-Cyclodextrin based magnetic hyper-crosslinked polymer: A recyclable adsorbent for effective preconcentration of triazine herbicides in complex sample matrices

High efficiency enrichment and trace analysis of triazine herbicide residues are crucial for ensuring environmental and food safety. Herein, a series of magnetic hyper-crosslinked polymers (CD-gs-MHCPs) were synthesized with different crosslinkers, which might possess different pore structure and surface area, so they might dispay variable adsorption performance. CD-gs-MHCP2 with dichloroxylene as crosslinker delivered superior adsorption ability for triazine herbicides (THs). The synergistic effect of hydrogen bonds, hydrophobic interaction, π-π stacking interaction and pore adsorption were proved to be the main adsorption mechanism. Combined CD-gs-MHCP2 based magnetic solid-phase extraction (MSPE) with high-performance liquid chromatography, the quantitative analysis of THs in river water and vegetable samples (zucchini, pakchoi) was achieved. Under the optimal conditions, the enrichment factors for three different samples ranged from 94 to 244 and low detection limit (S/N = 3) of the four THs were obtained from 0.05 to 0.15 ng mL-1 for river water and 0.31-3.10 ng g-1 for vegetable samples. The method recoveries were in the range of 86.2 %-120 % with relative standard deviations lower than 7.4 %. This work not only offers a new strategy for fabrication β-CD-based HCPs, but also provided a practical and effective method for efficient isolation and sensitive detection of trace THs residues in complex samples.

Recent advancements in the extraction and analysis of phthalate acid esters in food samples

Phthalate acid esters (PAEs) are ubiquitous environmental pollutants present in food samples, necessitating accurate detection for risk assessment and remediation efforts. This review provides an updated overview of the recent progress on the PAEs analysis regarding sample pretreatment techniques and analytical methodologies over the latest decade. Advances in sample preparation include solid-based extraction techniques replacing conventional liquid-liquid extraction, with solid sorbents emerging as promising alternatives due to their minimal solvent consumption and enhanced selectivity. Although techniques like the microextraction methods offer versatility and reduced solvent reliance, there is a need for more efficient and environmentally friendly techniques enabling on-site portable detection. High-resolution mass spectrometry is increasingly utilized for its enhanced sensitivity and reduced contamination risks. However, challenges persist in developing in situ analytical techniques for trace PAEs in complex food samples. Future research should prioritize novel analytical techniques with superior sensitivity and selectivity, addressing current limitations to meet the demand for precise PAEs detection in diverse food matrices.

Direct extraction of ten estrogens from milk samples with DVB/NVP-modified magnetic solid-phase extraction adsorbent followed by pre-column derivatization-UHPLC-MS/MS

Estrogens and their analogues can cause harm to human health through the food chain. Ten estrogens in different milk samples were directly extracted by amphiphilic divinylbenzene/N-vinyl-2-pyrrolidone (DVB/NVP)-Fe3O4@SiO2-based magnetic solid-phase extraction (MSPE) followed by pre-column derivatization and ultra-high performance liquid chromatography tandem mass-spectrometry (UHPLC-MS/MS) detection. Under the optimal conditions, the limits of detection for ten analytes were in the range of 0.05-0.38 ng mL-1 in whole liquid milk matrix and 0.04-3.00 ng g-1 in milk powder matrix. The intra-/inter-day accuracy ranged in 83.4-113.8%, with RSDs in 2.5-15.0%. A total of 15 brands of liquid milk and milk powder samples were analyzed, and only estradiol was detected in three brands of boxed liquid milk within safe range. The proposed sample pretreatment eliminated the common protein precipitation process, improved the sample throughput, and has the potential for routine testing of estrogens and their analogues in market-sale milk samples.

Occurrence and combined exposure of phthalate esters in urban soil, surface dust, atmospheric dustfall, and commercial food in the semi-arid industrial city of Lanzhou, Northwest China

A total of 138 samples including urban soil, surface dust, atmospheric dustfall, and commercial food were collected from the semi-arid industrial city of Lanzhou in Northwest China, and 22 phthalate esters (PAEs) were analyzed in these samples by gas chromatography-mass spectrometry for the pollution characteristics, potential sources, and combined exposure risks of PAEs. The results showed that the total concentration of 22 PAEs (Ʃ22PAEs) presented surface dust (4.94 × 104 ng/g) ≫ dustfall (1.56 × 104 ng/g) ≫ food (2.14 × 103 ng/g) ≫ urban soil (533 ng/g). Di-n-butyl phthalate (DNBP), di-isobutyl phthalate, di(2-ethylhexyl) phthalate (DEHP), and di-isononyl phthalate/di-isodecyl phthalate were predominant in the environmental media and commercial food, being controlled by priority (52.1%-65.5%) and non-priority (62.1%) PAEs, respectively. Elevated Ʃ22PAEs in the urban soil and surface dust was found in the west, middle, and east of Lanzhou. Principal component analysis indicated that PAEs the urban soil and surface dust were related with the emissions of products containing PAEs, atmosphere depositions, and traffic and industrial emissions. PAEs in the foods were associated with the growth and processing environment. The health risk assessment of United States Environmental Protection Agency based on the Chinese population exposure parameters indicated that the total exposure dose of 22 PAEs was from 0.111 to 0.226 mg/kg/day, which were above the reference dose (0.02 mg/kg/day) and tolerable daily intake (TDI, 0.05 mg/kg/day) for DEHP (0.0333-0.0631 mg/kg/day), and TDI (0.01 mg/kg/day) for DNBP (0.0213-0.0405 mg/kg/day), implying that the exposure of PAEs via multi-media should not be ignored; the total non-carcinogenic risk of six priority PAEs was below 1 for the three environmental media (1.21 × 10-5-2.90 × 10-3), while close to 1 for food (4.74 × 10-1-8.76 × 10-1), suggesting a potential non-carcinogenic risk of human exposure to PAEs in food; the total carcinogenic risk of BBP and DEHP was below 1 × 10-6 for the three environmental media (9.13 × 10-10-5.72 × 10-7), while above 1 × 10-4 for DEHP in food (1.02 × 10-4), suggesting a significantly carcinogenic risk of human exposure to DEHP in food. The current research results can provide certain supports for pollution and risk prevention of PAEs.

Versatile Hyper-Cross-Linked Polymers Derived from Waste Polystyrene: Synthesis, Properties, and Intentional Recycling

Waste polystyrene contributes considerably to environmental pollution due to its persistent nature, prompting a widespread consensus on the urgent need for viable recycling solutions. Owing to the aromatic groups structure of polystyrene, hyper-cross-linked polymers can be synthesized through the Friedel-Crafts cross-linking reaction using Lewis acids as catalysts. In addition, hyper-cross-linked polystyrene and its carbonaceous counterparts can be used in several important applications, which helps in their efficient recycling. This review systematically explores methods for preparing multifunctional hyper-cross-linked polymers from waste polystyrene and their applications in sustainable recycling. We have comprehensively outlined various synthetic approaches for these polymers and investigated their physical and chemical properties. These multifunctional polymers not only exhibit structural flexibility but also demonstrate diversity in performance, making them suitable for various applications. Through a systematic examination of synthetic methods, we showcase the cutting-edge positions of these materials in the field of hyper-cross-linked polymers. Additionally, we provide in-depth insights into the potential applications of these hyper-cross-linked polymers in intentional recycling, highlighting their important contributions to environmental protection and sustainable development. This research provides valuable references to the fields of sustainable materials science and waste management, encouraging further exploration of innovative approaches for the utilization of discarded polystyrene.

Phthalate esters in clothing: A review

Phthalate esters (PAEs) are widely used as plasticizers to enhance the flexibility and durability of different consumer products, including clothing. However, concerns have been raised about the potential adverse health effects associated with the presence of phthalates in textiles, such as endocrine disruption, reproductive toxicity and potential carcinogenicity. Based on examination of more than 120 published articles, this paper presents a comprehensive review of studies concerning the phthalate content in clothing and other textile products, with special emphasis on those conducted in the last decade (2014-2023). The types and role of PAEs as plasticizers, the relevant legislation in different countries (emphasizing the importance of monitoring PAE levels in clothing to protect consumer health) and the analytical methods used for PAE determination are critically evaluated. The review also discusses the models used to evaluate exposure to PAEs and the associated health risks. Finally, the study limitations and challenges related to determining the phthalate contents of textile products are considered.

Fabrication of Nitrogen Based Magnetic Conjugated Microporous Polymer for Efficient Extraction of Neonicotinoids in Water Samples

Facile and sensitive methods for detecting neonicotinoids (NEOs) in aquatic environments are crucial because they are found in extremely low concentrations in complex matrices. Herein, nitrogen-based magnetic conjugated microporous polymers (Fe3O4@N-CMP) with quaternary ammonium groups were synthesized for efficient magnetic solid-phase extraction (MSPE) of NEOs from tap water, rainwater, and lake water. Fe3O4@N-CMP possessed a suitable specific surface area, extended π-conjugated system, and numerous cationic groups. These properties endow Fe3O4@N-CMP with superior extraction efficiency toward NEOs. The excellent adsorption capacity of Fe3O4@N-CMP toward NEOs was attributed to its π-π stacking, Lewis acid-base, and electrostatic interactions. The proposed MSPE-HPLC-DAD approach based on Fe3O4@N-CMP exhibited a wide linear range (0.1-200 µg/L), low detection limits (0.3-0.5 µg/L), satisfactory precision, and acceptable reproducibility under optimal conditions. In addition, the established method was effectively utilized for the analysis of NEOs in tap water, rainwater, and lake water. Excellent recoveries of NEOs at three spiked levels were in the range of 70.4 to 122.7%, with RSDs less than 10%. This study provides a reliable pretreatment method for monitoring NEOs in environmental water samples.

Fabrication of Magnetic Molecularly Imprinted Polymers for Selective Extraction of Dibutyl Phthalates in Food Matrices

In this study, a novel magnetic molecularly imprinted polymeric material (Fe3O4@MOF@MIP-160) with a metal-organic backbone (Fe3O4@MOF) carrier was prepared using dibutyl phthalate (DBP) as a template. The material can be used for the efficient, rapid, and selective extraction of trace amounts of phthalic acid esters (PAEs) in food and can detect them via gas chromatography-mass spectrometry (GC-MS). The synthesis conditions of the materials were optimized to prepare the Fe3O4@MOF@MIP160 with the highest adsorption performance. Transmission electron microscopy (TEM), Fourier Transform Infrared Spectra (FT-IR), Vibration Sample Magnetic (VSM), and the Brunauer-Emmett-Teller (BET) method were used to characterize the materials. Compared with Fe3O4@MOF and the magnetic non-imprinted polymeric material (Fe3O4@MOF@NIP), Fe3O4@MOF@MIP-160 possesses the advantages of easy and rapid manipulation of magnetic materials, the advantages of high specific surface area and the stability of metal-organic frameworks, and the advantages of high selectivity of molecularly imprinted polymers. Fe3O4@MOF@MIP-160 has good recognition and adsorption capacity for di-butyl phthalate (DBP) and diethylhexyl phthalate (DEHP): the adsorption capacity for DBP and DEHP is 260 mg·g-1 and 240.2 mg·g-1, and the adsorption rate is fast (reaching equilibrium in about 20 min). Additionally, Fe3O4@MOF@MIP160 could be recycled six times, making it cost-effective, easy to operate, and time-saving as compared to traditional solid-phase extraction materials. The phthalate ester content in drinking water, fruit juice, and white wine was analyzed, with recoveries ranging from 70.3% to 100.7%. This proved that Fe3O4@MOF@MIP160 was suitable for detecting and removing PAEs from food matrices.

Hydroxyl and carboxyl group functionalized conjugated microporous nanomaterial as adsorbent for the solid-phase extraction of phenolic endocrine disrupting chemicals from freshwater fish samples

Endocrine disruption chemicals (EDCs) in food can seriously harm human health. In this study, a hydroxyl and carboxyl group functionalized conjugated microporous nanomaterial (CMP) was prepared by Friedel-Crafts reaction and used as solid-phase extraction (SPE) adsorbent. A functionalized CMP based SPE combined with high performance liquid chromatography-diode array detection was built for the determination of phenolic EDCs from nine fish samples. The extraction conditions were optimized by both single factor and response surface methodology (Box-Behnken Design). The established method performed well in terms of the response linearity (in the range of 0.50-100 ng g-1 with coefficient of determination larger than 0.9942), limits of detection (0.15-0.30 ng g-1, S/N of 3), limits of quantification (0.50-1.00 ng g-1, S/N = 10), method recoveries (78.4-121 %) and repeatability (relative standard deviation < 11 %). It can be used as an efficient method to detect trace phenolic EDCs in real fish samples.

Point-of-Use SERS Approach for Efficient Determination and Removal of Phthalic Acid Esters Based on a Metal-Organic Framework-Coated Melamine Sponge

Phthalic acid esters (PAEs) are ubiquitous environmental contaminants, and their real-time monitoring and removal remain challenging. Herein, a point-of-use (POU) device integrating adsorption, surface-enhanced Raman spectroscopy (SERS), and removal strategy was developed and realized ultrafast on-site determination of PAEs and cleanup of them from water. A piece of flexible melamine sponge (MS) was coated with gold nanostars (AuNSs) and metal-organic frameworks (MOFs), thus obtaining SERS activity and adsorption capacity. Based on this multifunctional AuNSs@MOFs/MS composite, clear trends were observed between SERS signal intensity and concentration of di(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP). The method detection limits of DEHP and DBP were calculated to be 0.75 × 10-7 and 0.67 × 10-7 M in water, respectively, proving good sensitivity. Furthermore, this POU device exhibited satisfactory adsorption capacity (∼82.3 g/g for DBP and ∼90.0 g/g for DEHP), high adsorption efficiency (equilibrium in 100 s), and good regeneration capability (removal efficiency >70% after 5 cycles). The applicability of this device was verified by its good determination and removal performance in real environmental water matrices. The whole process could be completed within 5 min. This approach provides a new POU alternative for real-time monitoring and removal of PAEs in water.

Unpacking Phthalates from Obscurity in the Environment

Phthalates (PAEs) are a group of synthetic esters of phthalic acid compounds mostly used as plasticizers in plastic materials but are widely applied in most industries and products. As plasticizers in plastic materials, they are not chemically bound to the polymeric matrix and easily leach out. Logically, PAEs should be prevalent in the environment, but their prevalence, transport, fate, and effects have been largely unknown until recently. This has been attributed, inter alia, to a lack of standardized analytical procedures for identifying them in complex matrices. Nevertheless, current advancements in analytical techniques facilitate the understanding of PAEs in the environment. It is now known that they can potentially impact ecological and human health adversely, leading to their categorization as endocrine-disrupting chemicals, carcinogenic, and liver- and kidney-failure-causing agents, which has landed them among contaminants of emerging concern (CECs). Thus, this review article reports and discusses the developments and advancements in PAEs' standard analytical methods, facilitating their emergence from obscurity. It further explores the opportunities, challenges, and limits of their advancements.

Method development of stir bar sportive extraction coupled with thermal desorption-gas chromatography-mass spectrometry for the analysis of phthalates in Peruvian pisco

In this work, for the first time, a stir bar sorptive extraction (SBSE) coupled with thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) was developed and validated for the determination of seven phthalates in Peruvian pisco. The phthalate compounds considered were dimethyl phthalate (DMP), diethyl phthalate (DEP), bis(2-ethylhexyl) hexahydrophthalate (BEHP), benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP), di-isodecyl phthalate (DIDP) and di-isobutyl phthalate (DIBP). The best overall analytical conditions obtained from the optimization were as follow: extraction time of 120 min, size of polydimethylsiloxane (PDMS) twister (20 mm length x 1 mm thickness), NaCl content (20 %) and sample volume (40 mL). The in-house validation of SBSE/TD-GC-MS method was performed taking into account the ISO/IEC 17,025 requirements and EURACHEM/CITAC guideline. Under optimal conditions, very low limits of detection of 1.3-0.21 µg L-1 were obtained. Furthermore, the limits of quantification ranged from 4.2-70 µg L-1, and the correlation coefficients were found to be ≥ 0.991. The method was precise, with relative standard deviations (RSD, %) for inter twister repeatability and the inter day repeatability precisions from 1.1 to 11 and from 6.2 to 15.9, respectively. The pisco samples were analysed with recoveries between 91-124.4%, and DBP, BEHP, and BBP were the most commonly found compounds in the samples. The optimized methodology was also evaluated in terms of green character, and it obtained almost the best AGREE score when it was compared with other previous methods for the analysis of phthalates in alcoholic beverages. Therefore, the SBSE/TD-GC-MS method has proved to be suitable for routine practice because it is simple, less laborious, economical, precise, accurate and green, and it would be applicable for pisco safety regulations.

Covalent organic framework-based magnetic solid-phase extraction coupled with gas chromatography-tandem mass spectrometry for the determination of trace phthalate esters in liquid foods

Covalent organic framework-coated magnetite particles (Fe3O4@COF) were synthesized and applied as the adsorbent to the selective capture of phthalate esters (PAEs) in liquid foods. Combined with the magnetic solid-phase extraction (MSPE) technology, a gas chromatography-tandem mass spectrometry (GC-MS/MS) method was employed for the separation and quantification of PAEs. Following optimization of the magnetic extraction and elution parameters, the developed analytical method offered a satisfactory linear range (0.1-5 μg L-1) with determination coefficients ranging from 0.9934 to 0.9975 for the five different PAEs studied. The limits of detection (LOD) were in the range 1.9-12.8 ng L-1. The recoveries ranged from 70.0 to 119.8% with a relative standard deviation (RSD) less than 9.7%. Density functional theory (DFT) calculations established that the dominant adsorption mechanism used by the COF to bind PAEs involved π-π stacking interactions. Results encourage the wider use of COF-based adsorbents and MSPE methods in the analytical determination of PAEs in foods.

Synthesis of phosphate-functionalized magnetic porous organic polymer: A sorbent for sensitive determination of neonicotinoid insecticides in water and lemon juice

There is an urgent need to prepare advanced functional materials for extraction and enrichment of trace organic pollutants from different samples. In this work, two novel phosphate-functionalized porous organic polymers (DBP-POP and DPP-POP) were synthesized for the first time. Compared with phosphate-free counterpart, both phosphate-functionalized POPs showed excellent adsorption performance for the neonicotinoids due to the hydrogen bonding, π-π interaction and hydrophobic interaction. For ease of separating the sorbent from solution, magnetic DBP-POP (M-DBP-POP) was further prepared as sorbent to extract neonicotinoids from environmental water and lemon juice samples prior to their determination by high performance liquid chromatography-ultraviolet detection. Under optimal conditions, the detection limits (S/N = 3) of the method were 0.01-0.08 ng mL-1 for water and 0.03-0.10 ng mL-1 for lemon juice. The recoveries were in the range of 80.0% to 113.0% with relative standard deviation less than 10.6%. This work demonstrated the feasibility of phosphate-functionalized POPs for adsorption applications.

Catechol-Based Porous Organic Polymers for Effective Removal of Phenolic Pollutants from Water

Phenolic pollutants released from industrial activities seriously damage natural freshwater resources, and their elimination or reduction to safe levels is an urgent challenge. In this study, three catechol-based porous organic polymers, CCPOP, NTPOP, and MCPOP, were prepared using sustainable lignin biomass-derived monomers for the adsorption of phenolic contaminants in water. CCPOP, NTPOP, and MCPOP showed good adsorption performance for 2,4,6-trichlorophenol (TCP) with theoretical maximum adsorption capacities of 808.06 mg/g, 1195.30 mg/g, and 1076.85 mg/g, respectively. In addition, MCPOP maintained a stable adsorption performance after eight consecutive cycles. These results indicate that MCPOP is a potential material for the effective treatment of phenol pollutants in wastewater.

Magnetic covalent organic frameworks for rapid solid-phase extraction of phthalate esters and bisphenol A in beverage samples

Phthalate esters (PAEs) and bisphenol A (BPA) are endocrine-disrupting chemicals (EDCs), which are widely used in the production of food plastic packaging and easily migrate to food. Continuous exposure to EDCs may cause harm to human health. Herein, magnetic covalent organic framework TFP-NDA/Fe₃O₄ was synthesized by magnetizing covalent organic framework TFP-NDA through a facile coprecipitation method, and used as an adsorbent for rapid solid-phase extraction of PAEs (diethyl phthalate (DEP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP)) and BPA. The extraction equilibrium can be reached within 12 min. By combination with a gas chromatography-flame ionization detector, the limits of detection were 0.7-2.3 μg L^-1 and the linear ranges were 10-500 μg L^-1 for diethyl phthalate (DEP) and 10-1000 μg L^-1 for diisobutyl phthalate (DIBP), dibutyl phthalate (DBP) and BPA with R² > 0.9916. In beverage samples (plastic bottled drinking water, juice and carbonated drink), the developed method was successfully applied to extract and quantify PAEs and BPA with recoveries ranging from 81.7% to 114.2%.

Extraction and determination of terpenoids from Zexie Decoction based on a porous organic cage-doped monolithic cartridge

A monolithic solid-phase extraction (SPE) cartridge packed with a composite adsorbent was fabricated via polymerization using dodecene as the monomer with the porous organic cage (POC) material doped, combing with an analytical column through a high-performance liquid chromatography (HPLC) instrument, which was used for the online extraction and separation of 23-acetyl alismol C, atractylodes lactone II and atractylodes lactone III from Zexie Decoction. The POC-doped adsorbent shows porous structure with a relatively high specific surface area of 85.50 m²/g, which was obtained from the characterizations of a scanning electron microscope and an automatic surface area and porosity analyser. Efficient extraction and separation of three target terpenoids was achieved by an online SPE-HPLC method based on the POC-doped cartridge, which exhibits strong matrix-removal ability and good terpenoids-retention ability with a high adsorption capacity, due to the interactions of hydrogen bond and hydrophobicity between the terpenoids and the POC-doped adsorbent. Method validation shows good linearity (r ≥ 0.9998) of the regression equation, and high accuracy with the spiked recovery in the range of 99.2 %-100.8 % of the proposed method. Compared to the generally disposable adsorbent, this work fabricated a reusable monolithic cartridge, which can be used for at least 100 times, with the RSD based on the peak area of the three terpenoids less than 6.6 %.

Fluorine-Functionalized Triazine-Based Porous Organic Polymers for the Efficient Adsorption of Aflatoxins

Food safety issue caused by aflatoxins has aroused widespread concern in society. Herein, a novel fluorine-functionalized triazine-based porous organic polymer (F-POP) was developed for the first time by the simple condensation polymerization of 2,2'-bis(trifluoromethyl)benzidine and cyanuric chloride. With in-built fluorine functional group (F) and imine group (-NH-), F-POP displayed significantly superior adsorption ability for aflatoxins, outperforming fluorine-free POP due to the multiple interaction mechanisms of hydrogen bond, F-O interaction, π-π interaction, F-π interaction, and hydrophobic interaction. Thus, magnetic F-POP was prepared by introducing Fe₃O₄ into F-POP and then utilized as a magnetic sorbent for the extraction of trace aflatoxins in peanut and rice samples prior to high-performance liquid chromatography-fluorescence detection. Under the optimal conditions, the proposed method presented high sensitivity with the limit of detections at 0.005-0.15 ng g^-1. F-POP also exhibited outstanding adsorption capability for many other organic pollutants, revealing its great potential for analysis or adsorption applications.

Facile synthesis of Cu2+-immobilized magnetic covalent organic frameworks for highly efficient enrichment and sensitive determination of five phthalate monoesters from mouse plasma with HPLC-MS/MS

Development of a simple, highly selective, and sensitive analytical method for phthalate monoesters (mPAEs) remains a challenge due to the complexity of biological samples. To address this issue, Cu²⁺ immobilized magnetic covalent organic frameworks (Fe₃O₄@TtDt@Cu²⁺ composites) with core-shell structures were prepared to enhance the enrichment efficiency of mPAEs by a facile approach synthesis of COFs shells with inherent bifunctional groups on Fe₃O₄ NPs and further Cu²⁺ immobilization. The composites exhibit high specific surface area (348.1 m² g^-1), outstanding saturation magnetization (34.94 emu g^-1), ordered mesoporous structure, Cu²⁺ immobilization, and excellent thermal stability. Accordingly, a magnetic solid-phase extraction (MSPE) pretreatment technique based on Cu²⁺ immobilized COF composites combined with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established, and key parameters including the adsorbent amount, adsorption time, elution solvent, etc. were examined in detail. The developed analytical method showed wide linear ranges (10-8000 ng L^-1), low limit of detections (LODs, 2-10 ng L^-1), and good correlation coefficients (R² ≥ 0.9904) for the five mPAEs. Furthermore, the analytical method was also successfully applied to the highly sensitive detection of metabolite mPAEs in mouse plasma samples, indicating the promising application of the Fe₃O₄@TtDt@Cu²⁺ composites as a quick and efficient adsorbent in the sample pretreatment.

Primary amide-functionalized cyclotricatechylene covalent organic frameworks membrane for efficient enrichment of melamine and its derivatives in migration solution of food contact materials

A highly chemically stable primary amide-functionalized cyclotricatechylene covalent organic framework was synthesized by an irreversible reaction and a post-synthetic modification. It possessed a rod-like morphology and exhibited strong solvent stability owing to the polyether bonds. The material showed good adsorption performance for melamine and its derivatives and adsorption mechanism was investigated by molecular simulations. The adsorbent was coated on the nylon-66 membrane to prepare the enrichment membrane. Under optimized conditions, an in-syringe membrane-based extraction method, combined with ultra-high performance liquid chromatography-tandem mass spectrometry was developed for the analysis of melamine and six melamine derivatives in the migration solution. A good linearity was obtained with correlation coefficients ranging from 0.9924 to 0.9995. The limits of detection were 1-200 ng/L and the limits of quantification were 3-500 ng/L. This method was successfully applied to the migration solution of sushi bamboo rolling mats with spiked recoveries of 73.2%-115% and relative standard deviations of 0.9%-9.9%. This work shows a practical and perspective approach for the efficient enrichment of food contact material hazards.

Covalent triazine-based frameworks for efficient solid-phase microextraction of phthalic acid esters from food-contacted plastics

Owing to various health threats associated with phthalic acid esters (PAEs), this category of endocrine-disrupting compounds has attracted more and more public scrutiny. However, the efficient preconcentration of PAEs from complex food-contacted plastics still remains challenging. Herein, three covalent triazine-based frameworks (CTFs) were constructed by facile Friedel-Crafts reactions of cyanuric chloride (CC), with triptycene (TPC), fluorene (FL) and 1,3,5-triphenylbenzene (TPB), respectively. Three CTFs were then employed as solid-phase microextraction (SPME) coatings for the extraction of PAEs. Benefiting from the large surface area and high pore volume, the newly-synthesized CC-TPC based SPME method exhibited large enrichment factors (978-2210), low limits of detection (0.027-0.10 ng g ^- 1), satisfactory linear ranges (0.09-20 ng g ^- 1), acceptable repeatabilities (4.3-9.6%) and high relative recoveries (92.0-104.6%).

Facile synthesis of hypercrosslinked polymer as high-efficiency adsorbent for the enrichment of nitroimidazoles from water, honey and chicken meat

Design and fabrication of functionalized hypercrosslinked polymers (HCPs) for enhancing their performance by using green renewable monomers has attracted considerable research interest. In this study, hydroxyl‑functional HCP (labeled as OHHCP) was prepared via the knitting method by applying natural naringenin as a monomer for the first time. Due to the good hydrophilicity and strong H-bonding ability, the OHHCP showed high extraction capacity for nitroimidazoles. Thus, it was successfully applied as a potent adsorbent for solid phase extraction of five nitroimidazoles in water, honey and chicken meat, followed by high-performance liquid chromatography-diode array detector analysis. At the optimized conditions, the limit of detections (S/N = 3) of the proposed method for water, honey and chicken samples were 0.02 - 0.06 ng mL^-1, 0.5 - 1.0 ng g^-1 and 0.8 - 1.0 ng g^-1, respectively. The recoveries were 80.0 - 110%, and the relative standard deviations were below 10.0%. The OHHCP also displayed good application prospects for other organic compounds with H-bonding capability. This study highlights the facile preparation of OH-functionalized HCPs from renewable and natural resources as potent adsorbents for polar compounds.

Green synthesis of novel magnetic porous organic polymer for magnetic solid phase extraction of neonicotinoids in lemon juice and honey samples

Natural rutin with abundant hydroxyl groups was used as a green monomer to synthesize hydroxyl-functional magnetic porous organic polymer (named Rut-MOP) through environmentally-benign diazo-coupling reaction for the first time. The Rut-MOP displayed high extraction capability for neonicotinoid insecticides (thiamethoxam, imidacloprid, acetamiprid and thiacloprid). Thus, a Rut-MOP based magnetic solid-phase extraction method combined with high performance liquid chromatography was established for sensitive determination of neonicotinoid insecticides in lemon juice and honey samples. Under optimized conditions, the linear response of neonicotinoids was 0.1-100.0 ng mL^-1 for lemon juice and 8.0-1000.0 ng g^-1 for honey. The limits of detection (S/N = 3) were 0.03-0.04 ng mL^-1 and 2.5-3.0 ng g^-1 for lemon juice and honey, respectively. The method recoveries were 82-118% with the relative standard deviations of 1.9-7.6%. The results demonstrate that the Rut-MOP based method can be served as a good alternative for the sensitive analysis of neonicotinoid insecticides in lemon juice and honey.

Facile fabrication of hydroxyl-functionalized hypercrosslinked polymer for sensitive determination of chlorophenols

Three hydroxyl-functionalized hypercrosslinked polymers (HCP-POL, HCP-HQ and HCP-PG) were synthesized by Friedel-Crafts reaction. The HCP-HQ displayed the largest surface area and highest adsorption capacity for chlorophenols (CPs). Thus, the HCP-HQ was further modified with magnetism to obtain M-HCP-HQ. An efficient magnetic solid-phase extraction method with M-HCP-HQ as adsorbent was developed for the first time to simultaneously extract four CPs from water and honey samples before analysis by high performance liquid chromatography-diode array detection. Under optimized conditions, the low detection limits (S/N = 3) were obtained to be 0.06-0.10 ng mL^-1 for water and 0.80-1.75 ng g^-1 for honey. The method recovery was 80.7%-119%, with relative standard deviations below 9.5%. The enrichment factors of the CPs were in the range of 57-220. The extraction mechanism could be attributed to the strong polar interaction, hydrogen bonding and π-π interactions between the M-HCP-HQ and CPs. The M-HCP-HQ based method can be served as a reliable and sensitive tool for detection CPs in water and honey samples.

Facile and Selective Determination of Total Phthalic Acid Esters Level in Soft Drinks by Molecular Fluorescence Based on Petroleum Ether Microextraction and Selective Derivation by H2SO4

Determining the level of phthalic acid esters (PAEs) in packaged carbonated beverages is a current need to ensure food safety. High-selectivity and -accuracy identification of individual PAEs can be achieved by chromatographic and mass spectrometric (MS) techniques. However, these methods are slow; involve complicated, expensive instruments in professional laboratories; and consume a large amount of organic solvents. As such, a food analysis method is needed to conveniently and rapidly evaluate multiple contaminants on site. In this study, with the assistance of ultrasound, we quickly determined the total PAEs in soft drinks using 1.5 mL of petroleum ether in one step. Then, we determined the characteristic molecular fluorescence spectrum of all PAEs in samples (excitation (Ex)/emission (Em) at 218/351 nm) using selectively concentrated sulfuric acid derivatization. The relative standard deviations of the fluorescent intensities of mixed solutions with five different PAEs were lower than 7.1% at three concentration levels. The limit of detection of the proposed method is 0.10 μmol L−1, which matches that of some of the chromatographic methods, but the proposed method uses less organic solvent and cheaper instruments. These microextraction devices and the fluorescence spectrometer are portable and provide an instant result, which shows promise for the evaluation of the total level of PAEs in beverages on site. The proposed method successfully detected the total level of PAEs in 38 kinds of soft drink samples from local supermarkets, indicating its potential for applications in the packaged beverage industry.

Facile synthesis and evaluation of three magnetic 1,3,5-triformylphloroglucinol based covalent organic polymers as adsorbents for high efficient extraction of phthalate esters from plastic packaged foods

•

A facile synthetic route for synthesis of three magnetic Tp-based COPs adsorbents was provided.

•

Magnetic COP2 showed best extraction performance for PAEs.

•

The potential adsorption mechanism was systematically investigated.

•

This method was suitable for high efficient extraction of hydrophobic PAEs from foods.

Three covalent organic polymers (COPs) were successfully fabricated by room-temperature solvent-free mechanochemical grinding method between 1,3,5-triformylphloroglucinol (TP) and p-phenyl enediamine (COP1), benzidine (COP2), 4, 4″-diamino-p-terphenyl (COP3), and followed by coprecipitation on the surface of Fe₃O₄ nanoparticles to form three corresponding magnetic Tp-series COPs. The fabricated magnetic COPs were evaluated and then applied for the extraction of phthalate esters from food samples before gas chromatography-tandem spectrometry analysis. Magnetic COP2 exhibited the highest extraction efficiency, which can be attributed to its larger pore size, and its strong hydrophobic and π-π interactions with phthalate esters. The method possessed good linearity (10–1000 μg·kg⁻¹), high sensitivity (0.29–2.59 µg·kg⁻¹ for LODs and 0.97–8.63 µg·kg⁻¹ for LOQs), and satisfactory recoveries (70.2–108.1%) with relative standard deviations lower than 5.2%. This method has potentials for high efficient separation/preconcentration of hydrophobic phthalate esters from foods.

Synthesis of the Magnetically Nanoporous Organic Polymer Fe3O4@SiO2-NH2-COP and Its Application in the Determination of Sulfonamide Residues in Surface Water Surrounding a Cattle Farm

Efficient extractions of trace antibiotic residues in the environment are a key factor for accurate quantification of the residues. A new nanoporous material, namely, magnetically covalent organic polymer (MCOP, Fe₃O₄@SiO₂-NH₂-COP) was synthesized in this work and was used for magnetic solid-phase extraction (MSPE). The combination of MSPE with high-performance liquid chromatography separation together with ultraviolet detection (HPLC-UV) was established as an effective method for the determination of four sulfonamide (SA) residues in surface water surrounding a cattle farm. The synthesized magnetic material was characterized by SEM, TEM, FT-IR, magnetic properties measurement system (MPMS), and nitrogen gas porosimetry. The material possessed many attractive features, such as a unique microporous structure, a larger specific surface area (137.93 m²·g⁻¹) than bare Fe₃O₄ (24.84 m²·g⁻¹), high saturation magnetization (50.5 emu·g⁻¹), open adsorption sites, and high stability. The influencing parameters, including pH, the used amount of MCOPs, the type of eluent, adsorption solution, and desorption time, were optimized. Under the optimized conditions, the method conferred good linearity ranges (R² ≥ 0.9990), low detection limits (S/N = 3, LOD, 0.10–0.25 μg·L⁻¹), and satisfactory recoveries (79.7% to 92.2%). The enrichment factor (EF) for the four SAs was 34.13–38.86. The relative standard deviations of intraday (n = 5) and of interday (n = 3) were less than 4.8% and 8.9%, respectively. The equilibria between extraction and desorption for SAs could be reached within 150 s. The proposed method was sensitive and convenient for detecting SA residues in complex environmental matrices, and the successful application of the new MCOPs as an adsorbent was demonstrated.

A new core–shell magnetic mesoporous surface molecularly imprinted composite and its application as an MSPE sorbent for determination of phthalate esters

In this study, a new core–shell magnetic mesoporous surface molecularly imprinted polymer (Fe₃O₄@SiO₂@mSiO₂-MIPs) which has specific adsorption and rapid adsorption rate for phthalate esters (PAEs) was prepared by a convenient method. Based on this composite as a magnetic solid phase extraction (MSPE) material, a rapid, efficient and sensitive matrix dispersion magnetic solid-phase extraction gas chromatography-mass spectrometry method (DMSPE-GC/MS) was developed for the determination of PAEs in multiple liquid samples. It is the first time that Fe₃O₄@SiO₂@mSiO₂-MIPs have been prepared by bonding amino groups on the surface of a double layer silicon substrate with diisononyl phthalate (DINP) as virtual template and 3-(2-aminoethyl)-aminopropyl trimethoxymethylsilane (TSD) as functional monomer. FT-IR, TEM, EDS, SEM, XRD, BET and VSM were used to characterize the composite. The adsorption isotherm and kinetics of Fe₃O₄@SiO₂@mSiO₂-MIPs showed that it possessed fast adsorption rates (approximately 5 min to reach equilibrium), high adsorption capacities (523.9 mg g⁻¹) and good recognition of PAEs. The real samples were preconcentrated by Fe₃O₄@SiO₂@mSiO₂-MIPs, under the optimum DMSPE-GC/MS conditions. Validation experiments showed that the method presented good linearity (R² > 0.9971), satisfactory precision (RSD < 5.7%) and high recovery (92.1–105.8%), and the limits of detection ranged from 1.17 ng L⁻¹ to 3.03 ng L⁻¹. The results indicated that the novel method had good sensitivity, high efficiency and wide sample application and was suitable for the determination of PAEs in liquid drink samples such as water, alcohol, beverages and so on.

A new core–shell magnetic mesoporous surface molecularly imprinted polymer (Fe3O4@SiO2@mSiO2-MIPs) which has specific adsorption for phthalate esters was synthesized by a facile and convenient method.