A target-induced amperometic aptasensor for sensitive zearalenone detection by CS@AB-MWCNTs nanocomposite as enhancers

Surface-Activated Ti3C2Tx Adsorption of Acetylene Black Coupled with Polyaniline as a Signal Tag for the Detection of the ESAT-6 Antigen of Mycobacterium tuberculosis

Early secretory antigenic target-6 (ESAT-6) is regarded as the most immunogenic protein produced by Mycobacterium tuberculosis, whose detection is of great clinical significance for tuberculosis diagnosis. However, the detection of the ESAT-6 antigen has been hampered by the expensive cost and complex experimental procedures, resulting in low sensitivity. Herein, we developed a titanium carbide (Ti3C2Tx)-based aptasensor for ESAT-6 detection utilizing a triple-signal amplification strategy. First, acetylene black (AB) was immobilized on Ti3C2Tx through a cross-linking reaction to form the Ti3C2Tx-AB-PAn nanocomposite. Meanwhile, AB served as a conductive bridge, and Ti3C2Tx can synergistically promote the electron transfer of PAn. Ti3C2Tx-AB-PAn exhibited outstanding conductivity, high electrochemical signals, and abundant sites for the loading of ESAT-6 binding aptamer II (EBA II) to form a novel signal tag. Second, N-CNTs were adsorbed on NiMn layered double hydride (NiMn LDH) nanoflowers to obtain NiMn LDH/N-CNTs, exhibiting excellent conductivity and preeminent stability to be used as electrode modification materials. Third, the biotinylated EBA (EBA I) was immobilized onto a streptavidin-coated sensing interface, forming an amplification platform for further signal enhancement. More importantly, as a result of the synergistic effect of the triple-signal amplification platform, the aptasensor exhibited a wide detection linear range from 10 fg mL-1 to 100 ng mL-1 and a detection limit of 4.07 fg mL-1 for ESAT-6. We envision that our aptasensor provides a way for the detection of ESAT-6 to assist in the diagnosis of tuberculosis.

A novel sandwich-type electrochemical immunosensor for sensitive detection of zearalenone using NG/PDDA/HNTs and Ti-MOF-KB composites for signal amplification

In this work, a novel sandwich-type electrochemical immunosensor based on signal amplification was developed for the ultrasensitive detection of zearalenone (ZEA). The composite consisting of poly(diallyldimethylammonium chloride) functionalized nitrogen doped graphene, halloysite nanotubes and toluidine blue (Tb/NG/PDDA/HNTs), was synthesized for the first time. Then it was modified with gold nanoparticles (AuNPs) to bind the secondary antibody (Ab2, 10 μg mL-1) and form the tracer label. In addition, ketjen black (KB) was doped into titanium-based metal-organic framework (Ti-MOF), which provided large specific surface area and employed as the sensing platform to increase the immobilization of the primary antibody (Ab1, 10 μg mL-1). This immunosensor showed a wide linear range for ZEA from 10 fg mL-1 to 100 ng mL-1 with a limit of detection (LOD) as low as 0.57 fg mL-1, which was below the maximum tolerable levels (50∼100 µg kg-1) set by the United Nations Food and Agriculture Organization (FAO).

Nanoscale Materials Applying for the Detection of Mycotoxins in Foods

Trace amounts of mycotoxins in food matrices have caused a very serious problem of food safety and have attracted widespread attention. Developing accurate, sensitive, rapid mycotoxin detection and control strategies adapted to the complex matrices of food is crucial for in safeguarding public health. With the continuous development of nanotechnology and materials science, various nanoscale materials have been developed for the purification of complex food matrices or for providing response signals to achieve the accurate and rapid detection of various mycotoxins in food products. This article reviews and summarizes recent research (from 2018 to 2023) on new strategies and methods for the accurate or rapid detection of mold toxins in food samples using nanoscale materials. It places particular emphasis on outlining the characteristics of various nanoscale or nanostructural materials and their roles in the process of detecting mycotoxins. The aim of this paper is to promote the in-depth research and application of various nanoscale or structured materials and to provide guidance and reference for the development of strategies for the detection and control of mycotoxin contamination in complex matrices of food.

Advances in aptamers, and application of mycotoxins detection: A review

Mycotoxin contamination in food products can easily cause serious health hazards and economic losses to human beings. How to accurately detect and effectively control mycotoxin contamination has become a global concern. Mycotoxins conventional detection techniques e.g; ELISA, HPLC, have limitations like, low sensitivity, high cost and time-consuming. Aptamer-based biosensing technology has the advantages of high sensitivity, high specificity, wide linear range, high feasibility, and non-destructiveness, which overcomes the shortcomings of conventional analysis techniques. This review summarizes the sequences of mycotoxin aptamers that have been reported so far. Based on the application of four classic POST-SELEX strategies, it also discusses the bioinformatics-assisted POST-SELEX technology in obtaining optimal aptamers. Furthermore, trends in the study of aptamer sequences and their binding mechanisms to targets is also discussed. The latest examples of aptasensor detection of mycotoxins are classified and summarized in detail. Newly developed dual-signal detection, dual-channel detection, multi-target detection and some types of single-signal detection combined with unique strategies or novel materials in recent years are focused. Finally, the challenges and prospects of aptamer sensors in the detection of mycotoxins are discussed. The development of aptamer biosensing technology provides a new approach with multiple advantages for on-site detection of mycotoxins. Although aptamer biosensing shows great development potential, still some challenges and difficulties are there in practical applications. Future research need high focus on the practical applications of aptasensors and the development of convenient and highly automated aptamers. This may lead to the transition of aptamer biosensing technology from laboratory to commercialization.

Novel insights into versatile nanomaterials integrated bioreceptors toward zearalenone ultrasensitive discrimination

Detrimental contamination of zearalenone (ZEN) in crops and foodstuffs has drawn intensive public attention since it poses an ongoing threat to global food security and human health. Highly sensitive and rapid response ZEN trace analysis suitable for complex matrices at different processing stages is an indispensable part of food production. Conventional detection methods for ZEN encounter many deficiencies and demerits such as sophisticated equipment and heavy labor intensity. Alternatively, the nanomaterial-based biosensors featured with high sensitivity, portability, and miniaturization are springing up and emerging as superb substitutes to monitor ZEN in recent years. Herein, we predominantly devoted to overview the progress in the fabrication strategies and applications of various nanomaterial-based biosensors, highlighting rationales on sensing mechanisms, response types, and practical analytical performance. Synchronously, the versatile nanomaterials integrating with diverse recognition elements for augmenting sensing capabilities are emphasized. Finally, critical challenges and perspectives to expedite ZEN detection are outlooked.

A fluorescence aptasensor based on hybridization chain reaction for simultaneous detection of T-2 toxins and zearalenone1

It is extremely necessary to establish a rapid and high-throughput method to detect mycotoxins in food, because grains and cereals are greatly vulnerable to mycotoxins before and after harvest. In this study, we developed a portable aptasensor based on streptavidin magnetic microspheres (MMPs) and hybridization chain reaction (HCR) to simultaneously detect T-2 toxin and zearalenone (ZEN) in corn and oat flour. The MMPs compete with the aptamer for binding, which releases more H0 and triggers HCR with the H1 intermediate modified using 6-FAM and BHQ-1 and the unmodified H2. Subsequently, placing the HCR system corresponding to T-2 and ZEN in a constant-temperature fluorescence detector resulted in well-recovered fluorescence of the HCR products. T-2 and ZEN exhibited good fluorescence response in the dynamic range of 0.001-10 ng mL^-1 and 0.01-100 ng mL^-1 with detection limits of 0.1 pg mL^-1 and 1.2 pg mL^-1, respectively. In addition, this strategy achieved the selective detection of T-2 and ZEN in the spiked corn and oat flour samples. The results are also in good agreement with those obtained using commercial ELISA kits. This developed aptasensor with the characteristics of simple operation and portability has the application potential of establishing sensitive and portable field detection of various mycotoxins.

Dual-quenching effects of methylene blue on the luminophore and co-reactant: Application for electrochemiluminescent-electrochemical ratiometric zearalenone detection

Methylene blue (MB) is a common multifunctional indicator, which can be applied as a quencher for electrochemiluminescence (ECL) analysis as well as a classical redox probe. Although it is relatively prevalent for MB to study the mechanism with Ru-based luminophores in ECL systems, there are few studies on the effects between MB and co-reactants. In this work, we proposed the first investigation of MB on the luminophore and co-reactant of the self-enhanced ECL composites (nitrogen-doped graphene quantum dots on Ru(bpy)₃²⁺-doped silica nanoparticles, NGQDs-Ru@SiO₂), respectively. The relatively narrow ECL spectrum of luminophore (Ru@SiO₂) and the suitable ultraviolet-visible absorption spectrum of MB led to the ECL resonance energy transfer between them, meanwhile the appropriate energy levels among them facilitated the electron transfer, resulting in a decreased ECL signal (quench mode I). Additionally, the co-reactant (NGQDs) was prone to π-π conjugation with MB due to its abundant π-electrons, which reduced the concentration of NGQDs' intermediates and triggered a weakened ECL signal (quench mode II). Therefore, the dual-quenching effects are ingeniously integrated and designed in one ECL-electrochemical (ECL-EC) ratiometric aptasensor for zearalenone detection, for demonstrating its efficacy in enhancing the sensitivity, which is 4.8-fold higher than Ru@SiO₂ alone. This innovative ratiometric aptasensor achieved a relatively wide linear range from 1.0 × 10^-15 to 5.0 × 10^-8 g mL^-1, and obtained a low detection limit of 8.5 × 10^-16 g mL^-1. Our proposed dual-quenching interactions between MB and NGQDs-Ru@SiO₂ will open a new prospective for ECL-EC ratiometric aptasensor, which further broaden the application in sensitive and precise analysis of mycotoxins.

A sensitive and rapid determination of zinc ion (Zn2+) using electrochemical sensor based on f-MWCNTs/CS/PB/AuE in drinking water

An electrochemical method for detecting the presence of zinc (Zn²⁺) ions in drinking water was developed using functionalized multi-walled carbon nanotubes (f-MWCNTs) and chitosan (CS). Numerous cylinder-shaped graphene molecules make up f-MWCNTs, which have a high mechanical and electrical conductivity. CS benefits from nanomaterials include biocompatibility, biodegradability, and low toxicity, which are excellent in capacity absorption of metal ions. Dangerous levels of metal ions such as zinc are currently present in drinking water as a result of human and natural activity. Zinc toxicity is associated with a variety of disorders, including Alzheimer's, Parkinson's, diabetes, and cancer. This study incorporated f-MWCNTs and CS with Prussian blue (PB) immobilised on a gold electrode (AuE). Several parameters, including as buffers, pH, scan rate, redox indicator, accumulation time, and volume, were optimised using the cyclic voltammetry (CV) method. According to the CV method, the optimal parameters were phosphate buffered saline (0.1 M, pH 2), 5 mM Prussian blue, 200 mVs^-1 scan rate, and 5 s accumulation time. Under ideal circumstances, the differential pulse voltammetry (DPV) method was used to determine the Zn²⁺ ions concentration range of 0.2-7.0 ppm. The limit of detection (LOD) was 2.60 × 10^-7 mol L^-1 with a correlation coefficient of R² = 0.9777. The recovery rate of the developed sensor (f-MWCNTs/CS/PB/AuE) ranged from 95.78 to 98.96%. The developed sensor showed a variety of advantages for detecting Zn²⁺ in drinking water, including a quick setup process, quick detection, high sensitivity, and mobility. This study developed the essential sensor for monitoring Zn²⁺ levels in drinking water in the future.

A label-free visual aptasensor for zearalenone detection based on target-responsive aptamer-cross-linked hydrogel and color change of gold nanoparticles

ZEN-responsive hydrogel was prepared using ZEN aptamer and a cationic conjugated skeleton which was formed by the electrostatic interaction between acrylamide and poly (diallyldimethylammonium chloride) (PDDA). In the presence of ZEN, the binding of aptamer and ZEN caused the hydrogel to dissociate, releasing the gold nanoparticles (AuNPs) encapsulated in the hydrogel into supernatant, whose color changes serving as response instructions were observed by eyes. To realize low dose visual detection, the TMB-H₂O₂ was used for quantitative readout by AuNPs released from the hydrogel which can efficiently catalyze the reaction to generate a obvious change.There was a good linear relationship between the changed absorbance and concentration of ZEN within 2.5-100 ng/mL, a detection limit of 0.98 ng/mL, recovery rates of 98.8%-101.3% and 99.8%-101.5% for corns and beer, respectively. This developed sensing strategy would provide a promising application for other mycotoxins by replacing the corresponding aptamer sequences.

Electrochemical aptasensing strategy based on a multivariate polymertitanium-metal-organic framework for zearalenone analysis

An electrochemical aptasensing strategy was developed with a novel bioplatform based on a multivariate titanium metal-organic framework, i.e. MTV polyMOF(Ti), to detect zearalenone (ZEN). MTV polyMOF(Ti) was prepared by using mixed linkers of polyether polymer (pbdc-xa or L₈, pbdc = poly(1,4-benzenedicarboxylate) and 1,4-benzenedicarboxylic acid (H₂bdc or L₀) as well as tetrabutyl titanate as nodes (MTV polyMOF(Ti)-L_8,0). Compared with Ti-MOFs synthesized by using the single ligand of L₈ or L₀, MTV polyMOF(Ti)-L_8,0 shows more porous structure assembled with multilayered nanosheets. In light of the improved electrochemical activity and strong bioaffinity to the aptamer, the aptasensor based on MTV polyMOF(Ti)-L_8,0 shows excellent performance for detecting ZEN with the ultralow detection limit at fg mL^-1 level in the linear range of 10 fg mL^-1 to 10 ng mL^-1, along with good selectivity, reproducibility, stability, regenerability, and applicability.

Evanescent Wave Optical-Fiber Aptasensor for Rapid Detection of Zearalenone in Corn with Unprecedented Sensitivity

Zearalenone (ZEN) is a common mycotoxin pollutant found in agricultural products. Aptamers are attractive recognition biomolecules for the development of mycotoxin biosensors. Even though numerous aptasensors have been reported for the detection of ZEN in recent years, many of them suffer from problems including low sensitivity, low specificity, tedious experimental steps, high-cost, and difficulty of automation. We report here the first evanescent wave optical-fiber aptasensor for the detection of ZEN with unprecedented sensitivity, high specificity, low cost, and easy of automation. In our aptasensor, a 40-nt ZEN-specific aptamer (8Z₃₁) is covalently immobilized on the fiber. The 17-nt fluorophore Cy5.5-labeled complementary DNA strand and ZEN competitively bind with the aptamer immobilized on the fiber, enabling the signal-off fluorescent detection of ZEN. The coating of Tween 80 enhanced both the sensitivity and the reproducibility of the aptasensor. The sensor was able to detect ZEN spiked-in the corn flour extract with a semilog linear detection range of 10 pM-10 nM and a limit of detection (LOD, S/N = 3) of 18.4 ± 4.0 pM (equivalent to 29.3 ± 6.4 ng/kg). The LOD is more than 1000-fold lower than the maximum ZEN residue limits set by China (60 μg/kg) and EU (20 μg/kg). The sensor also has extremely high specificity and showed negligible cross-reactivity to other common mycotoxins. In addition, the sensor was able to be regenerated for 28 times, further decreasing its cost. Our sensor holds great potential for practical applications according to its multiple compelling features.

Simple and programmed three-dimensional DNA tweezer for simultaneous one-step detection of ochratoxin A and zearalenone

Three-dimensional (TD) deoxyribonucleic acid (DNA) tweezers were programmed for one-step identification and detection of ochratoxin A (OTA) and zearalenone (ZEN). The unfolding of the TD-DNA tweezers by aptamers specific to these two mycotoxins "turned" the fluorescent signals "on." The bonding of the aptamers to their corresponding targets in OTA and ZEN "turned" the fluorescent signals and the DNA tweezers "off." The detection limit of the TD-DNA tweezers for OTA and ZEN was 0.032 and 0.037 ng mL^-1, respectively. The feasibility of this method was tested using two samples. Detection via this method increased the recovery of OTA and ZEN from 95.8% to 110.2%. Spike recovery and certified food products were used to detect applicability in actual situations. Analyte detection in complex samples using TD-DNA tweezers is rapid, as the process involves a single operational step. This proposed design has considerable potential for application in mycotoxin detection.

Electrochemical sensing platform for the detection of methyl parathion applying highly biocompatible non-covalent functionalized phosphonium-based ionic liquid@MWCNTs hybrid to immobilize hemoglobin

A hydrophobic carboxyl functionalized phosphonium-based ionic liquid (IL) ((5-carboxypentyl) triphenylphosphonium bis (trifluoromethyl)sulfonyl) amide, TPP-HA[TFSI]) was synthesized through a simple hydrothermal approach. Based on the π-π and cation-π interactions with multi-wall carbon nanotubes (MWCNTs), a TPP-HA[TFSI]@MWCNTs hybrid was prepared to immobilize hemoglobin (Hb) to fabricate a simple and effective electrochemical sensing platform for the detection of methyl parathion (MP) in vegetables. Spectroscopic and electrochemical results show that TPP-HA[TFSI]@MWCNTs substrate synergistically provided a good biocompatible microenvironment for Hb, and the hydrophobicity of TPP-HA[TFSI] and the π-π interaction and hydrogen bonding between TPP-HA[TFSI]@MWCNTs, Hb and nafion (NF) were conducive to maintain the stability and integrity of the modified electrode interface. The TPP-HA[TFSI]@MWCNTs with large surface area and high conductivity promoted the exposure of the electroactive center of Hb and the direct electron transfer between Hb and the electrode, which effectively amplified the electrochemical signal and improved the sensitivity of MP detection. The constructed electrochemical sensing platform had a wider linear range (2-14 ng mL^-1) and a lower detection limit (0.62 ng mL^-1) for MP, and had acceptable repeatability, reproducibility, stability and anti-interference ability. This results indicated that the phosphonium-based ILs functionalized MWCNTs was an effective substrate for the immobilization of biological components, which have broad prospect in the construction of electrochemical sensing interfaces.

Recent Progress in Rapid Determination of Mycotoxins Based on Emerging Biorecognition Molecules: A Review

Mycotoxins are secondary metabolites produced by fungal species, which pose significant risk to humans and livestock. The mycotoxins which are produced from Aspergillus, Penicillium, and Fusarium are considered most important and therefore regulated in food- and feedstuffs. Analyses are predominantly performed by official laboratory methods in centralized labs by expert technicians. There is an urgent demand for new low-cost, easy-to-use, and portable analytical devices for rapid on-site determination. Most significant advances were realized in the field bioanalytical techniques based on molecular recognition. This review aims to discuss recent progress in the generation of native biomolecules and new bioinspired materials towards mycotoxins for the development of reliable bioreceptor-based analytical methods. After brief presentation of basic knowledge regarding characteristics of most important mycotoxins, the generation, benefits, and limitations of present and emerging biorecognition molecules, such as polyclonal (pAb), monoclonal (mAb), recombinant antibodies (rAb), aptamers, short peptides, and molecularly imprinted polymers (MIPs), are discussed. Hereinafter, the use of binders in different areas of application, including sample preparation, microplate- and tube-based assays, lateral flow devices, and biosensors, is highlighted. Special focus, on a global scale, is placed on commercial availability of single receptor molecules, test-kits, and biosensor platforms using multiplexed bead-based suspension assays and planar biochip arrays. Future outlook is given with special emphasis on new challenges, such as increasing use of rAb based on synthetic and naïve antibody libraries to renounce animal immunization, multiple-analyte test-kits and high-throughput multiplexing, and determination of masked mycotoxins, including stereoisomeric degradation products.

Aptasensors for mycotoxins in foods: Recent advances and future trends

Mycotoxin contamination in foods has posed serious threat to public health and raised worldwide concern. The development of simple, rapid, facile, and cost-effective methods for mycotoxin detection is of urgent need. Aptamer-based sensors, abbreviated as aptasensors, with excellent recognition capacity to a wide variety of mycotoxins have attracted ever-increasing interest of researchers because of their simple fabrication, rapid response, high sensitivity, low cost, and easy adaptability for in situ measurement. The past few decades have witnessed the rapid advances of aptasensors for mycotoxin detection in foods. Therefore, this review first summarizes the reported aptamer sequences specific for mycotoxins. Then, the recent 5-year advancements in various newly developed aptasensors, which, according to the signal output mode, are divided into electrochemical, optical and photoelectrochemical categories, for mycotoxin detection are comprehensively discussed. A special attention is taken on their strengths and limitations in real-world application. Finally, the current challenges and future perspectives for developing novel highly reliable aptasensors for mycotoxin detection are highlighted, which is expected to provide powerful references for their thorough research and extended applications. Owing to their unique advantages, aptasensors display a fascinating prospect in food field for safety inspection and risk assessment.

Recent Achievements in Electrochemical and Surface Plasmon Resonance Aptasensors for Mycotoxins Detection

Mycotoxins are secondary metabolites of fungi that contaminate agriculture products. Their release in the environment can cause severe damage to human health. Aptasensors are compact analytical devices that are intended for the fast and reliable detection of various species able to specifically interact with aptamers attached to the transducer surface. In this review, assembly of electrochemical and surface plasmon resonance (SPR) aptasensors are considered with emphasis on the mechanism of signal generation. Moreover, the properties of mycotoxins and the aptamers selected for their recognition are briefly considered. The analytical performance of biosensors developed within last three years makes it possible to determine mycotoxin residues in water and agriculture/food products on the levels below their maximal admissible concentrations. Requirements for the development of sample treatment and future trends in aptasensors are also discussed.

Aptasensors for mycotoxin detection: A review

Mycotoxins are toxic compounds produced by fungi, which represent a risk to the food and feed supply chain, having an impact on health and economies. A high percentage of feed samples have been reported to be contaminated with more than one type of mycotoxin. Systematic, cost-effective and simple tools for testing are critical to achieve a rapid and accurate screening of food and feed quality. In this review, we describe the various aptamers that have been selected against mycotoxins and their incorporation into optical and electrochemical aptasensors, outlining the strategies exploited, highlighting the advantages and disadvantages of each approach. The review also discusses the different materials used and the immobilization methods employed, with the aim of achieving the highest sensitivity and selectivity.

Multimodal/Multifunctional Nanomaterials in (Bio)electrochemistry: Now and in the Coming Decade

Multifunctional nanomaterials, defined as those able to achieve a combined effect or more than one function through their multiple functionalization or combination with other materials, are gaining increasing attention in the last years in many relevant fields, including cargo targeted delivery, tissue engineering, in vitro and/or in vivo diseases imaging and therapy, as well as in the development of electrochemical (bio)sensors and (bio)sensing strategies with improved performance. This review article aims to provide an updated overview of the important advances and future opportunities exhibited by electrochemical biosensing in connection to multifunctional nanomaterials. Accordingly, representative aspects of recent approaches involving metal, carbon, and silica-based multifunctional nanomaterials are selected and critically discussed, as they are the most widely used multifunctional nanomaterials imparting unique capabilities in (bio)electroanalysis. A brief overview of the main remaining challenges and future perspectives in the field is also provided.