Fabrication of novel self-healing edible coating for fruits preservation and its performance maintenance mechanism

Multifunctional konjac glucomannan/xanthan gum self-healing coating for bananas preservation

Damage to the integrity of the preservation coating on the fruit surface will seriously affect the shelf life of the fruit. In this work, the strong hydrogen bond interaction between xanthan gum (XG) and konjac glucomannan (KGM) could form hydrogel films with self-healing properties. The introduction of gallic acid (GA) was beneficial to further improve the antioxidant activity and UV shielding performance of the composite films. Surprisingly, the mechanical properties and gas (water vapor, O2 and CO2) barrier properties of the KGM film crosslinked by XG were significantly improved. The experiment of banana preservation showed that the composite coating could effectively delay the water loss and browning of bananas, slow down the decomposition of pectin and starch in the flesh, and extend the shelf life of bananas for >6 days. Therefore, this multifunctional coating is an excellent packaging material and has a very broad application prospect in the field of food preservation.

Chitosan-fucoidan encapsulating cinnamaldehyde composite coating films: Preparation, pH-responsive release, antibacterial activity and preservation for litchi

In this study, an edible composite film with pH-responsive release was prepared by the formation of Schiff-base imine bonds between chitosan (CS) and oxidized fucoidan (CS-FU) and encapsulating cinnamaldehyde (CA). Fourier-transform infrared, 1H nuclear magnetic resonance, X-ray photoelectron spectroscopy and gel permeation chromatography confirmed the formation of CS-FU. The result showed that, oxidation degree of FU, degrees of substitution, average molecular weight and yield of CS-FU were 25.57 %, 10.48 %, 23.3094 kDa and 45.63 ± 0.64 %, respectively. Scanning electron microscopy revealed that CA was encapsulated within the CS-FU matrix. Increasing the CA content could improve the mechanical properties and ultraviolet and visible-light resistances of the CS-FU coating films but enhance their water vapor permeabilities. The release of CA increased as the pH decreased, and the antibacterial rate at pH 5 was 2.3-fold higher than that at pH 7, indicating good pH-responsive release and antibacterial properties in mildly acidic environments. Owing to their excellent properties, the CA/CS-FU-0.1 coating films maintained the appearance and quality indices of litchis for at least eight days. Hence, multifunctional composite coating films are prospective eco-friendly and intelligently responsive controlled-release packaging materials for fruit preservation.

Characterization of chitosan film incorporated pine bark extract and application in carp slices packaging

Active films based on chitosan incorporated with pine bark extract (PBE) were prepared and characterized. Subsequently, these films were utilized for packaging carp slices in refrigerated storage at 4 ± 1 °C. Analysis of the physicochemical properties and biological activity of the active films revealed that, except for water content, all assessed indices showed an increasing trend with an increase in the amount of supplemental PBE. As this trend progresses, scanning electron microscopy (SEM) analysis revealed deposition on the film surface accompanied by transverse lines and fractures, while the color of the film gradually changed from light yellow to reddish-brown. Fourier transform infrared spectroscopy (FTIR) indicated that the phenolic hydroxyl groups in PBE interacted with the hydrogen in the amino groups of chitosan molecules to form non-covalent bonds. X-ray diffraction analysis (XRD) showed that the reaction between PBE and chitosan altered the crystalline structure of chitosan molecules. Moreover, the analysis of the effects of active films on the pH, water-holding capacity, thiobarbituric acid values, and the total bacterial counts of carp slices revealed that in terms of preservation, films containing 30 % PBE were the most effective, using which the shelf life of carp slices could be extended by 50 %.

Degradation of carbofuran and acetamiprid in wolfberry by dielectric barrier discharge plasma: Kinetics, pathways, toxicity and molecular dynamics simulation

Carbofuran and acetamiprid pose the highest residual risk among pesticides found in wolfberries. This study aimed to degrade these pesticides in wolfberries using a multi-array dielectric barrier discharge plasma (DBD), evaluate the impact on safety and quality and explore their degradation mechanism. The results showed that DBD treatment achieved 90.6% and 80.9% degradation rates for carbofuran and acetamiprid, respectively, following a first-order kinetic reaction. The 120 s treatment successfully reduced pesticide contamination to levels below maximum residue limits. Treatment up to 180 s did not adversely affect the quality of wolfberries. QTOF/MS identification and degradation pathway analysis revealed that DBD broke down the furan ring and carbamate group of carbofuran, while replacing the chlorine atom and oxidizing the side chain of acetamiprid, leading to degradation. The toxicological evaluation showed that the degradation products were less toxic than undegraded pesticides. Molecular dynamics simulations revealed the reactive oxygen species (ROS) facilitated the degradation of pesticides through dehydrogenation and radical addition reactions. ROS type and dosage significantly affected the breakage of chemical bonds associated with toxicity (C4-O5 and C2-Cl1). These findings deepen insights into the plasma chemical degradation of pesticides.

Recent advances in starch-based coatings for the postharvest preservation of fruits and vegetables

Efficient and low-cost postharvest preservation of fruits and vegetables has always been one of the urgent problems to be solved in the food field. Due to the wide sources, good environmental and human safety, and high biodegradability, starch-based coating preservation method has great application prospects in the postharvest preservation of fruits and vegetables. However, starch materials also have the disadvantages of poor mechanical properties and easy water absorption performance, which makes it difficult to fully meet the requirements in practical production. Therefore, starch is often used in combination with other components to form composite materials. This paper began with an introduction to the preservation principles of edible starch-based coatings, including inherent properties and extra functional properties. Besides, the preservation principles of edible coatings and the recent advances in the field of fruit and vegetable preservation were also comprehensively reviewed, focusing on the preparation and application of starch-based coatings. The information will contribute to the further development of starch-based coatings to improve the postharvest preservation effect of fruits and vegetables.

Improved sustained-release properties of ginger essential oil in a Pickering emulsion system incorporated in sodium alginate film and delayed postharvest senescence of mango fruits

The insufficient water vapor barrier and mechanical capacity of sodium alginate (SA) film limited its application in fruit preservation. Herein, cellulose nanocrystals (CNCs) were used to stabilize Pickering emulsion. Then, we prepared SA composite films. Ginger essential oil (GEO) was loaded as antimicrobials and antioxidants. Finally, the application on mangos were investigated. Compared to coarse emulsion, Pickering emulsion and its film-formation-solution showed more stable system and larger droplet size. The emulsion significantly changed the properties of SA film. Specifically, CNCs improved the thermal, tensile, and barrier properties of the film and GEO enhanced the ultraviolet-visible light barrier capacity. Additionally, the SA/CNC film possessed a homogeneous micromorphology which had a sustained-release effect on GEO, thus maintaining high postharvest quality and long-term bioavailability for mangos. In conclusion, the film prepared via Pickering emulsion showed satisfactory properties which had great potential in fruit preservation.

Effects of Litsea cubeba Essential Oil-Chitosan/Corn Starch Composite Films on the Quality and Shelf-Life of Strawberry (Fragaria × ananassa)

In this work, we have developed a composite chitosan film incorporating the Litsea cubeba essential oil (LCEO) and starch with good physical properties, and investigated the effect of coating strawberries with this composite film. The best formula of the LCEO/chitosan/corn starch/glycerol (LCEO/CH/CS/gly) composite films is 0.25% LCEO, 2.75% CH, 0.40% corn starch, and 0.75% glycerol. Coating strawberries with CH/CS/gly film or LCEO/CH/CS/gly films resulted in significantly lower respiration intensity and a slower decay rate, much slower decreases in the firmness, and reductions in the sugar and ascorbic acid content of the fruit during storage (p < 0.05). The coatings also led to a much slower accumulation of malondialdehyde and anthocyanins (p < 0.05). The LCEO/CH/CS/gly film was generally more effective than the CH/CS/gly film; however, the effect was more obvious in the later stages of storage. Thus, coating strawberries with CH/CS/gly film or LCEO/CH/CS/gly film can be a viable method for extending the shelf-life of the fruit.

An overview of the potential application of chitosan in meat and meat products

Chitosan is considered the second most ubiquitous polysaccharide next to cellulose. It has gained prominence in various industries including biomedicine, textile, pharmaceutical, cosmetic, and notably, the food industry over the last few decades. The polymer's continual attention within the food industry can be attributed to the increasing popularity of greener means of packaging and demand for foods incorporated with natural alternatives instead of synthetic additives. Its antioxidant, antimicrobial, and film-forming abilities reinforced by the polymer's biocompatible, biodegradable, and nontoxic nature have fostered its usage in food packaging and preservation. Microbial activity and lipid oxidation significantly influence the shelf-life of meat, resulting in unfavorable changes in nutritional and sensory properties during storage. In this review, the scientific studies published in recent years regarding potential applications of chitosan in meat products; and their effects on shelf-life extension and sensory properties are discussed. The utilization of chitosan in the form of films, coatings, and additives in meat products has supported the extension of shelf-life while inducing a positive impact on their organoleptic properties. The nature of chitosan and its compatibility with various materials make it an ideal biopolymer to be used in novel arenas of food technology.

Intervention mechanisms of cold plasma pretreatment on the quality, antioxidants and reactive oxygen metabolism of fresh wolfberries during storage

Fresh wolfberries, a nutritious "super fruit", face limited marketing potential due to storage difficulties. This study aimed to enhance their storage stability using dielectric barrier discharge plasma (DBD) pretreatment and investigate the intervention mechanism. The results indicated that the optimal condition of DBD pretreatment for fresh wolfberries was 13.64 kV, 70 s and 2.7 kHz, which extended their shelf from 2 to 5 d at room temperature. This pretreatment reduced decay, weight loss, and firmness reduction by inactivating microorganisms and inhibiting respiration. Additionally, the decline of phenols, flavonoids, ascorbic acid, and antioxidant activity was inhibited, while maintaining high content of polysaccharides, titratable acid, and carotenoids. Interestingly, moderate DBD treatment produced reactive oxygen species (ROS) that triggered the defense response of wolfberries' ROS metabolism system and promoted the biosynthesis of flavonoids, thereby enhancing resistance to decay. The findings offer new insight into plasma effects on fruits and vegetables.

Advanced biopolymer-based edible coating technologies for food preservation and packaging

Along with the growth of the world's population that reduces the accessibility of arable land and water, demand for food, as the fundamental element of human beings, has been continuously increasing each day. This situation not only becomes a challenge for the modern food chain systems but also affects food availability throughout the world. Edible coating is expected to play a significant role in food preservation and packaging, where this technique can reduce the number of food loss and subsequently ensure more sustainable food and agriculture production through various mechanisms. This review provides comprehensive information related to the currently available advanced technologies of coating applications, which include advanced methods (i.e., nanoscale and multilayer coating methods) and advanced properties (i.e., active, self-healing, and super hydrophobic coating properties). Furthermore, the benefits and drawbacks of those technologies during their applications on foods are also discussed. For further research, opportunities are foreseen to develop robust edible coating methods by combining multiple advanced technologies for large-scale and more sustainable industrial production.

High-Performance, Degradable, Self-Healing Bio-Based Nanocomposite Coatings with Antibacterial and Antioxidant Properties

The purpose of this study is to obtain a bio-based coating with good functional activity and self-healing ability, demonstrating its potential in food, materials, and other application fields. Plastic coatings can cause serious environmental pollution. It was a good solution to replace plastic coatings with degradable coatings. However, the development of degradable coatings in the fields of food and materials was limited due to their insufficient antibacterial ability and weak comprehensive properties. Therefore, chitosan nanoparticles (NPs) loaded with gallic acid (GA) were self-assembled with gelatin (GE) to prepare high-performance, degradable, self-healing bio-based nanocomposite coatings with antibacterial and antioxidant properties. The oxygen permeability of GE nanocomposite coatings decreased gradually with the addition of NPs, and the barrier properties increased significantly. At the same time, due to the excellent antioxidant and antibacterial ability of GA, the antioxidant effect of the nanocomposite coatings increased by 119%, and the antibacterial rate against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) increased by 32% and 58%, respectively, compared with the pure GE coatings. In addition, the nanocomposite coatings can be repaired within 24 h after being scratched at room temperature. Finally, GA coated with chitosan nanoparticles can significantly delay the escape of GA, and the retardation of gallic acid release exceeded 89% in simulated solutions after 24 h immersion, extending the service life of the nanocomposite coatings.

Design and application of self-healable polymeric films and coatings for smart food packaging

Smart packaging materials enable active control of parameters that potentially influence the quality of a packaged food product. One type of these that have attracted extensive interest is self-healable films and coatings, which show the elegant, autonomous crack repairing ability upon the presence of appropriate stimuli. They exhibit increased durability and effectively lengthen the usage lifespan of the package. Over the years, extensive efforts have been paid to the design and development of polymeric materials that show self-healing properties; however, till now most of the discussions focus on the design of self-healable hydrogels. Efforts devoted to delineating related advances in the context of polymeric films and coatings are scant, not to mention works reviewing the use of self-healable polymeric materials for smart food packaging. This article fills this gap by offering a review of not only the major strategies for fabrication of self-healable polymeric films and coatings but also the mechanisms of the self-healing process. It is hoped that this article cannot only provide a snapshot of the recent development of self-healable food packaging materials, but insights into the optimization and design of new polymeric films and coatings with self-healing properties can also be gained for future research.

Magnolol Loaded on Carboxymethyl Chitosan Particles Improved the Antimicrobial Resistance and Storability of Kiwifruits

Magnolol is a natural compound extracted from the traditional Chinese medicine Magnolia officinalis, which exhibits antimicrobial properties. However, magnolol is insoluble in water and consists of a phenolic hydroxyl group, which is volatile; these factors hinder its application. In this study, a safe and environmentally friendly method to improve the microbial resistance and storability of harvested fruits is developed using the water-soluble carrier carboxymethyl chitosan (CMCS) and magnolol. Magnolol was loaded on CMCS particles to form Magnolol@CMCS antimicrobial particles, a preservation coating agent. Magnolol@CMCS particles effectively solved the problems of water insolubility and agglomeration of magnolol and reduced the size distribution D50 value of magnolol from 0.749 to 0.213 μm. Magnolol@CMCS particles showed greater toxicity against Staphylococcus aureus, Escherichia coli, and Botryosphaeria dothidea than that of magnolol alone, with effective medium concentration (EC50) values of 0.9408, 142.4144, and 8.8028 μg/mL, respectively. Kiwifruit treated with the Magnolol@CMCS solution showed delayed changes in fruit hardness and soluble solid and dry matter contents and significantly higher ascorbic acid (vitamin C) and soluble total sugar contents and sugar:acid ratios compared with that of the control fruit. In addition, no disease spots were observed on fruit treated with the Magnolol@CMCS solution within 7 days after inoculation with B. dothidea. In conclusion, Magnolol@CMCS particles showed antimicrobial activity on harvested fruits, effectively delayed the hardness and nutritional changes of fruits during storage, and improved the storability of kiwifruit.

An all-cellulose sponge with a nanofiller-assisted hierarchical cellular structure for fruit maintaining freshness

Cellulose sponges with compressibility and resilience are an ideal packaging material for fruits with fragile skin. Here, a soft and elastic all-cellulose sponge (CS) with a hierarchical cellular structure was fabricated, where the long molecular chain cellulose constructed major pores, the cellulose at nanoscale acted as an elastic nanofiller to fill the gaps of long molecular chain cellulose fibers and constructed minor pores. With these two kinds of pores, this structure can absorb strain hierarchically. The sponge can protect fruits from mechanical damage when dropped or repeated vibration. Furthermore, the CS modified with chlorogenic acid (C-CGAS) had excellent antibacterial and antifungal abilities. Therefore, C-CGAS could extend the storage time of strawberries to 18 days without any microbial invasion, which is the longest storage time reported thus far. This study provides a new idea for the preparation of polymer sponges and a new design for the development of antimicrobial packaging materials.

Short-Term Stability of Electrochemical Properties of Layer-by-Layer Coated Heterogeneous Ion Exchange Membranes

Layer-by-layer adsorption allows the creation of versatile functional coatings for ion exchange membranes, but the stability of the coating and resulting properties of modified membranes in their operation is a frequently asked question. This paper examines the changes in voltammetric curves of layer-by-layer coated cation exchange membranes and pH-metry of desalination chamber with a studied membrane and an auxiliary anion exchange membrane after short-term tests, including over-limiting current modes. The practical operation of the membranes did not affect the voltammetric curves, but enhanced the generation of H⁺ and OH^- ions in a system with polyethylenimine modified membrane in Ca²⁺ containing solution. It is shown that a distinction between the voltammetric curves of the membranes modified and the different polyamines persists during the operation and that, in the case of polyethylenimine, there is an additional zone of growth of potential drop in voltammetric curves and stronger generation of H⁺ and OH^- ions as indicated by pH-metry.

Chitosan-Based Materials: An Overview of Potential Applications in Food Packaging

Chitosan is a multifunctional biopolymer that is widely used in the food and medical fields because of its good antibacterial, antioxidant, and enzyme inhibiting activity and its degradability. The biological activity of chitosan as a new food preservation material has gradually become a hot research topic. This paper reviews recent research on the bioactive mechanism of chitosan and introduces strategies for modifying and applying chitosan for food preservation and different preservation techniques to explore the potential application value of active chitosan-based food packaging. Finally, issues and perspectives on the role of chitosan in enhancing the freshness of food products are presented to provide a theoretical basis and scientific reference for subsequent research.

Recent Advancements of Polysaccharides to Enhance Quality and Delay Ripening of Fresh Produce: A Review

The freshness of fruits and vegetables plays a significant role in consumers' decision to purchase a product at the supermarket. Fresh-cut products are the latest trend in fulfilling society's restless needs, and the food industry is faced with the challenge of maintaining the quality of fresh produce. The food industry is concerned with the natural maturation and degradation of fruits and vegetables, primarily due to enzymatic reactions. It has been demonstrated that polysaccharide coatings effectively preserve the freshness of these products, extending their shelf life depending on the preservation method used. This review informs readers about the different types of polysaccharides and their novel applications as natural food preservatives in the past five years (2018-2022). The key findings summarized the properties of the antimicrobial agent, the molecular mechanism of action, coating methods, and formulation for the preservation approach. Additionally, we discuss the scientific factors influencing polysaccharide processing and preservation efficacy, allowing it to be used in post-harvest management.

Effect of edible coating and modified atmosphere packaging on the microbiological and physicochemical stability of retail maki sushi

The effect of pH, packaging atmosphere (100% air, 40%, or 70% CO₂ balanced with N₂ ), and an edible chitosan coating was tested on the retail maki Sushi's microbiological and physiochemical stability. In two experiments, maki sushi was studied using sushi rice with an initial pH of 4.2 ± 0.05 and 4.8 ± 0.05. In the first experiment (lower pH), no apparent effect of neither modified atmosphere packaging (MAP) nor coating on bacterial growth was observed. However, raising the pH showed an apparent effect of low-CO₂ MAP and chitosan coating (p < 0.05). Both MAP and coating partly affected the maki sushi cross-section's visual perception, but no significant adverse effects were observed. An important observation was the improved stability of the pink salmon color in chitosan-coated maki sushi stored in low-CO₂ MAP compared to other groups. It is concluded that storage of Maki sushi at 4°C gives acceptable microbial stability and appropriate quality. However, an edible chitosan coating, especially in combination with low-CO₂ MAP, increases the microbiological stability and preserves the colorimetric properties of maki sushi stored at 8°C. Notably, this combination could work as a safety measure against temperature abuse in the food cold chain. PRACTICAL APPLICATION: Using an edible coating with active packaging can improve retail maki sushi's temperature tolerance and preserve its colorimetric properties. It is a fast and cost-effective technology with a substantial industrial potential easy to implement.

Potential of engineered nanostructured biopolymer based coatings for perishable fruits with Coronavirus safety perspectives

Fresh fruits are prioritized needs in order to fulfill the required health benefits for human beings. However, some essential fruits are highly perishable with very short shelf-life during storage because of microbial growth and infections. Thus improvement of fruits shelf-life is a serious concern for their proper utlization without generation of huge amount of fruit-waste. Among various methods employed in extension of fruits shelf-life, design and fabrication of edible nanocoatings with antimicrobial activities have attracted considerable interest because of their enormous potential, novel functions, eco-friendly nature and good durability. In recent years, scientific communities have payed increased attention in the development of advanced antimicrobial edible coatings to prolong the postharvest shelf-life of fruits using hydrocolloids. In this review, we attempted to highlight the technical breakthrough and recent advancements in development of edible fruit coating by the application of various types of agro-industrial residues and different active nanomaterials incorporated into the coatings and their effects on shelf-life of perishable fruits. Improvements in highly desired functions such as antioxidant/antimicrobial activities and mechanical properties of edible coating to significantly control the gases (O₂/CO₂) permeation by the incorporation of nanoscale natural materials as well as metal nanoparticles are reviewed and discussed. In addition, by compiling recent knowledge, advantages of coatings on fruits for nutritional security during COVID-19 pandemic are also summarized along with the scientific challenges and insights for future developments in fabrication of engineered nanocoatings.

Plant Byproducts as Part of Edible Coatings: A Case Study with Parsley, Grape and Blueberry Pomace

Studies dealing with the development of edible/biodegradable packaging have been gaining popularity since these commodities are marked as being ecofriendly, especially when byproducts are incorporated. Consequently, this study aimed at the development of chitosan-based coatings with plant byproducts. Their sensory properties, colour attributes, occurrence of cracks in microstructure and biodegradability were analysed. Coatings containing grape and blueberry pomace had statistically significantly (p < 0.05) higher levels of colour intensity. Coating samples were characterised by lower aroma intensity (3.46–4.77), relatively smooth surface (2.40–5.86), and low stickiness (2.11–3.14). In the overall hedonic evaluation, the samples containing parsley pomace in all concentrations and a sample containing 5% grape pomace achieved a statistically significantly (p < 0.05) better evaluation (5.76–5.93). The lowest values of the parameter ΔE2000 were recorded for the sample containing 5% parsley pomace (3.5); the highest was for the sample with 20% blueberry pomace (39.3). An analysis of the coating surface microstructure showed the presence of surface cracks at an 80 K magnification but the protective function of the edible coating was not disrupted by the added plant pomace. The produced samples can be considered to have a high biodegradability rate. The results of our experimentally produced coatings indicate their possible application on a commercial scale.