Carbon dots-magnetic nanocomposites for the detection and removal of Hg2

Fluorescent chemosensors facilitate the visualization of plant health and their living environment in sustainable agriculture

Globally, 91% of plant production encounters diverse environmental stresses that adversely affect their growth, leading to severe yield losses of 50-60%. In this case, monitoring the connection between the environment and plant health can balance population demands with environmental protection and resource distribution. Fluorescent chemosensors have shown great progress in monitoring the health and environment of plants due to their high sensitivity and biocompatibility. However, to date, no comprehensive analysis and systematic summary of fluorescent chemosensors used in monitoring the correlation between plant health and their environment have been reported. Thus, herein, we summarize the current fluorescent chemosensors ranging from their design strategies to applications in monitoring plant-environment interaction processes. First, we highlight the types of fluorescent chemosensors with design strategies to resolve the bottlenecks encountered in monitoring the health and living environment of plants. In addition, the applications of fluorescent small-molecule, nano and supramolecular chemosensors in the visualization of the health and living environment of plants are discussed. Finally, the major challenges and perspectives in this field are presented. This work will provide guidance for the design of efficient fluorescent chemosensors to monitor plant health, and then promote sustainable agricultural development.

Fast and eco-friendly synthesis of carbon dots from pinecone for highly effective detection of 2,4,6-trinitrophenol in environmental samples

2,4,6-Trinitrophenol (TNP) has high explosive risks and biological toxicity, and there has been considerable concern over the determination of TNP. In the present work, fluorescent carbon dots (CDs) stemmed from a green carbon source of pinecone by the facile hydrothermal approach. A novel environment- friendly fluorescent probe was developed to efficiently detect TNP by using the obtained CDs with remarkable fluorescence stability. The fluorescent CDs exhibited obvious excitation dependence with the highest peaks for excitation and emission occurring at 321 and 411 nm, respectively. The fluorescence intensity is significantly reduced by TNP owing to the inner filter effect with the CDs. The probe exhibited good linearity with TNP concentrations in the range of 0.025-20 μg mL-1, and the limit of detection was as low as 8.5 ng mL-1. Additionally, the probe proved successful in sensing TNP quantitatively in actual environmental samples with satisfied recoveries of 95.6-99.6%. The developed fluorescent probe offered an environment-friendly, efficient, rapid, and reliable platform for detecting trace TNP in the environmental field.HighlightsNovel carbon dots were synthesised from green precursors of pineal powder.The highly effective quenching process was put down to the inner filter effect.The as-constructed fluorescent probe was successfully utilised for sensing 2,4,6-trinitrophenol in environmental samples.The proposed method was simple, rapid, efficient, economical, and eco-friendly.

Facile synthesis of magnetic intelligent sensors for the pH-sensitive controlled capture of Cr(vi)

In this work, intelligent pH-sensitive sensors (Fe3O4/RhB@PAM) for Cr(vi) detection were successfully synthesized based on polyacrylamide (PAM) and Rhodamine B (RhB) co-modified Fe3O4 nanocomposites. The characterization results indicated that the sensors had many favorable properties, including suitable size, stable crystal structure and excellent magnetic response performance (47.59 emu g-1). In addition, the fluorescence changes during the detection process indicated that Fe3O4/RhB@PAM were "ON-OFF" intelligent sensors. When the Fe3O4/RhB@PAM sensors were placed in acidic Cr(vi) solution (pH 4), PAM acted as a pH-responsive "gatekeeper" releasing RhB, and the fluorescence intensity of released RhB was weakened by the complexation of Cr(vi). Furthermore, the fluorescence changes of the magnetic sensors were remarkably specific for Cr(vi) even in the presence of other competitive cations, and the limit of detection (LOD) for Cr(vi) was lower (0.347 μM) than the value recommended by the World Health Organization (0.96 μM). All the results presented in this study showed that the Fe3O4/RhB@PAM sensors had significant potential for Cr(vi) detection in acidic environmental samples.

Construction of a novel Eu-MOF material based on different detection mechanisms and its application in sensing pollutants aniline, F- and Hg2

Aniline is an organic pollutant with carcinogenicity and teratogenicity, while F- and Hg2+ are toxic ions that are easily soluble in water. When they are released to the environment, they will pose a threat to human health. Designing a material that can simultaneously detect three types of pollutants is of great significance. In this paper, a novel rare earth metal organic framework material (Eu-MOF) with three-dimensional structure based on 1-methylimidazole-4,5-dicarboxylic acid was synthesized for the first time through solvent thermal method. It has excellent luminescent performance and can be used as a multifunctional fluorescent probe to detect aniline, F-, and Hg2+ based on photoinduced electron transfer, energy competitive absorption, and ion exchange mechanisms, with detection limits of 1.79 × 10-8, 8.13 × 10-8, and 8.83 × 10-7 M, respectively. It is worth noting that Eu-MOF can detect F- and Hg2+ in real water samples, such as lake water and green tea water, with favorable recovery rates.

Oxygen vacancies-driven signal enhanced photoelectrochemical sensor for mercury ions detection

Mercury ion (Hg2+) poses a serious threat to human health due to its high toxicity. In this study, a smartphone-based photoelectrochemical sensor based on oxygen vacancies (OVs) driven signal enhancement for mercury ion detection was designed. BiVO4-x/Bi2S3/AuNPs were combined with T-Hg2+-T recognition mode to construct a multi-sandwich photoelectrochemical sensor. On the one hand, the OVs can increase the adsorption of light by the materials and enhance the photocurrent response as well as the superconductivity of Au NPs to accelerate the charge transfer at the electrode interface. On the other hand, the multi-sandwich structure was exploited to increase the binding site of Hg2+, as well as the T-Hg2+-T structure for sensitive recognition of Hg2+ and signal amplification. The sensor showed good linearity for Hg2+ concentration in the range of 0.1 nM-1.0 μM with a detection limit of 4.8 pM (S/N = 3). Eventually the smartphone-based real-time detection sensor is expected to contribute to the future analysis of heavy metal ions.

Constructing an eco-friendly and ratiometric fluorescent sensor for highly efficient detection of mercury ion in environmental samples

Mercury ion (Hg2+) is a highly toxic and ubiquitous pollutant, whose effective detection has aroused widespread concern. A novel ratiometric fluorescent sensor has been designed to rapidly and efficiently detect Hg2+ based on blue/red carbon dots (CDs) with environmental friendliness. This sensor was well characterized via TEM, FTIR, XPS, UV-vis, and zeta potential analysis and displayed excellent fluorescence properties and stability. The fluorescence of blue CDs at 447 nm was significantly quenched with the addition of Hg2+ resulted from the static quenching, whereas that of red CDs at 650 nm remained invariable. A sensitive method for Hg2+ determination was constructed in the range of 0.05-7.0 nmol mL-1 with optimal conditions, and the detection limit was down to 0.028 nmol mL-1. Meanwhile, compared to other 17 metal ions, the ratiometric fluorescent sensor exhibited high selectivity for Hg2+. Furthermore, satisfied recoveries had also been obtained for measuring trace Hg2+ in practical environmental samples. This developed ratiometric fluorescent sensor provided a reliable, environmental-friendly, rapid, and efficient platform for the detection of Hg2+ in environmental applications.

Green and Low-temperature Synthesis of Carbon Dots for Simple Detection of Kaempferol

As a common flavonols, kaempferol (Kae) has a broad market as health food and medicine for its anti-inflammatory, anti-oxidation, and anti-cancer properties. In this study, a novel convenient and simple fluorescent sensor based on carbon dots (CDs) for the detection of Kae was developed. The fluorescent CDs, with excellent photo-luminescence (PL) and up-conversion luminescence (UCPL) properties, were successfully prepared by low-temperature oil bath reaction based on ascorbic acid as carbon source at 90 °C in one pot. Under the optimal conditions, the fluorescence (FL) intensity of CDs was gradually quenched by the increasing addition of Kae with a linear relationship between F0/F and Kae concentration in a wide range from 5 µM to 100 µM with a detection limit of 0.38 µM. And this designed sensor was favourably applied for the detection of Kae in actual sample (xin-da-kang tablets). Moreover, the proposed CDs has great application prospects as a drug-sensor for detecting Kae due to its simple operation, economical and green materials, low equipment requirement, and rapid detection.

Current trends in the detection and removal of heavy metal ions using functional materials

The shortage of freshwater resources caused by heavy metal pollution is an acute global issue, which has a great impact on environmental protection and human health. Therefore, the exploitation of new strategies for designing and synthesizing green, efficient, and economical materials for the detection and removal of heavy metal ions is crucial. Among the various methods for the detection and removal of heavy ions, advanced functional systems including nanomaterials, polymers, porous materials, and biomaterials have attracted considerable attention over the past several years due to their capabilities of real-time detection, excellent removal efficiency, anti-interference, quick response, high selectivity, and low limit of detection. In this tutorial review, we review the general design principles underlying the aforementioned functional materials, and in particular highlight the fundamental mechanisms and specific examples of detecting and removing heavy metal ions. Additionally, the methods which enhance water purification quality using these functional materials have been reviewed, also current challenges and opportunities in this exciting field have been highlighted, including the fabrication, subsequent treatment, and potential future applications of such functional materials. We envision that this tutorial review will provide invaluable guidance for the design of functional materials tailored towards the detection and removal of heavy metals, thereby expediting the development of high-performance materials and fostering the development of more efficient approaches to water pollution remediation.

Metal-free auxiliary pyrophosphate detection based on near-infrared carbon dots

The excessive use of pyrophosphate (PPi) anions as additives poses a serious threat to human health and the environment. Considering the current status of PPi probes, the development of metal-free auxiliary PPi probes has important applications. In this study, a novel near-infrared nitrogen and sulfur co-doped carbon dots (N,S-CDs) were prepared. The average particle size of N,S-CDs was 2.25 ± 0.32 nm with average height was 3.05 nm. The probe N,S-CDs showed a special response to PPi, and a good linear relationship was obtained with PPi concentrations ranging from 0 to 1 μM, with the limit of detection being 0.22 nM. Tap water and milk were used for practical inspection, and ideal experimental results were acquired. In addition, the probe N,S-CDs also showed good results in biological systems, such as cell and zebrafish experiments.

Biological redox cycling amplification in a self-powered photoelectrochemical sensor based on TiO2/CdIn2S4/ g-C3N4-WO3 photoanode for sensitive detection of Hg2

A photoelectrochemical (PEC) sensor is proposed with a TiO₂/CdIn₂S₄ co-sensitive structure and a g-C₃N₄-WO₃ heterojunction as the photoanode to form a self-powered system. The photogenerated hole-induced biological redox cycle of TiO₂/CdIn₂S₄/g-C₃N₄-WO₃ composites is used as a signal amplification strategy for Hg²⁺ detection. In the test solution, ascorbic acid is first oxidized by the photogenerated hole of the TiO₂/CdIn₂S₄/g-C₃N₄-WO₃ photoanode, which triggers the ascorbic acid－glutathione cycle to achieve signal amplification and increase the photocurrent. However, in the presence of Hg²⁺, glutathione forms a complex with Hg²⁺, which destroys the biological cycle and leads to a decreased of photocurrent, thus achieving detection of Hg²⁺. Under optimal conditions, the proposed PEC sensor has a wider range (from 0.1 pM to 100 nM), and lower limit of Hg²⁺ detection (0.44 fM) than most other Hg²⁺ detection methods. In addition, the developed PEC sensor can be used to detect of real samples.

Controllable synthesis of bifunctional magnetic carbon dots for rapid fluorescent detection and reversible removal of Hg2

Mercury is one of the most toxic heavy metals, whose identification and separation are crucial for environmental remediation. Till now, it remains a significant challenge upon simultaneous detection and removal of Hg²⁺. Herein, bifunctional probe magnetic carbon dots were synthesized and optimized via systematic structure manipulation of the carbon and iron precursors towards fluorescence, Hg²⁺ adsorption and magnetic separation. The probe exhibited blue emission at 440 nm with high quantum yield of 55 % and a high paramagnetism with the saturation magnetization value of 22.70 emu/g. Furthermore, the fluorescent detection of Hg²⁺ with limit of 5.40 nM and high selectivity were achieved through surface structure manipulation with moderate -NH₂, -SH and Fe contents. As a result, the magnetic removal of Hg²⁺ was consecutively effectuated with high removal efficiency of 98.30 %. The detection and recovery of Hg²⁺ in real samples were further verified and demonstrated the excellent environmental tolerance of probe. The reusability was viable with recycling at least three turns by external magnet. This work not only provides a promising approach for simultaneous detection and removal of heavy metal pollution, but also provides an excellent example as a versatile platform for multifunction integration via the structure manipulation for other applications.

The synthesis of gold nanoclusters with high stability and their application in fluorometric detection for Hg2+ and cell imaging

Sensing Hg²⁺ is significant to protecting human health and environmental ecosystems, for its toxicity and genotoxicity. Here, highly stable fluorescent folic acid (FA)-protected Au nanoclusters (FA-AuNCs) were synthesized by optimizing the reactive parameters with high quantum yield of 34.7%. Main components of Au₄L were confirmed by MALDI-TOF, and the electron-rich residues of FA shell enabled FA-AuNCs excellent photostability. FA-AuNCs exhibited sensitive response behavior to Hg²⁺ with a minimum detectability of 1.3 nM, and presented extreme effect to the detection of Hg²⁺ in real water. Notably, the cellular imaging and in-situ detection of Hg²⁺ in cells can be achieved visually. The high selectivity was attributed to the chemical bond formed between Au⁺ (4f¹⁴5d¹⁰) and Hg²⁺ (4f¹⁴5d¹⁰). And the internal filter effect and static quenching effect were proved triggering the quenching of FA-AuNCs. The ultra-stable FA-AuNCs provide a potential promising opportunity for the in-situ tracing Hg²⁺ from environmental and biological samples.

The fabrication of N-doped carbon dots by methionine and their utility in sensing Cu2+ in real water

Copper ions (Cu²⁺) are ubiquitous in the ecosystem and cause serious environmental pollution, posing a threat to human health. Therefore, sensitive detection of Cu²⁺ is urgently needed. Herein, we employed a solvothermal method to prepare blue-emitting carbon dots (Met-CDs) using formamide (FA) and methionine (Met) as precursors, with a high quantum yield (QY) of 38%. Based on the good optical stability of Met-CDs and selective quenching by Cu²⁺, a sensitive probe using Met-CDs for the detection of Cu²⁺ in water was successfully designed. Within the linear range of 0.15-2 μM, the limit of detection (LOD) was determined to be as low as 47.7 nM, enabling the quantitative detection of Cu²⁺. Moreover, the recovery data of the spiked analysis of lake/river water samples were also satisfactory and verified the feasibility of the probe by the analysis of Cu²⁺ in natural conditions.

Highly Fluorescent Magnetic ATT-AuNCs@ZIF-8 for All-in-One Detection and Removal of Hg2+: An Ultrasensitive Probe to Evaluate Its Removal Efficiency

The development of multifunctional materials for the synchronous detection and removal of mercury ions (Hg²⁺) is in high demand. Although a few multifunctional materials as a fluorescent indicator and adsorbent have achieved this aim, the feedback of their removal efficiency still depends on other methods. Herein, magnetic Fe₃O₄ nanoparticles (MNPs) and 6-aza-2-thiothymine-protected gold nanoclusters (ATT-AuNCs) were rationally assembled into a zeolitic imidazolate framework 8 (ZIF-8) structure via a one-pot method. The coordination assembly of ATT-AuNCs and ZIF-8 not only strengthened the aurophilic interactions of adjacent ATT-AuNCs but also induced the restriction of intramolecular motion of ATT with a six-membered heterocyclic structure. As a consequence, the fluorescence (FL) quantum yield of MNPs/ATT-AuNCs@ZIF-8 was 12.5-fold higher than that of pristine ATT-AuNCs. Benefiting from the enhanced FL emission, MNPs/ATT-AuNCs@ZIF-8 showed improved sensitivity for Hg²⁺ detection and therefore could evaluate the removal efficiency via FL detection, without relying on another detection method. Additionally, the nanocomposite also displayed a satisfactory removal capability for Hg²⁺, including a short capture time (20 min), a high removal efficiency (>96.9%), and excellent reusability (10 cycles). This work provides an approach for customizing functional nanocomposites to concurrently detect and remove Hg²⁺ with superior performance, especially for high detection sensitivity.

One-step synthesis of highly fluorescent carbon dots as fluorescence sensors for the parallel detection of cadmium and mercury ions

Cadmium (Cd2+) and mercury ions (Hg2+) are essential for the quality control of food samples because of their serious toxicity to human health, but the effective and simple strategy for their parallel detection remains challenging. In this paper, a rapid and simple parallel detection method for Cd2+ and Hg2+ was developed using carbon dots (CDs) as fluorescent sensors. A one-step hydrothermal method with a single precursor l-arginine as both the carbon and nitrogen sources was employed to prepare nitrogen-doped CDs (N-CDs). N-CDs exhibited a uniform particle size and excitation-independent fluorescence emission. The maximum emission wavelength of N-CDs was observed at 354 nm with the excitation wavelength at 295 nm. The quantum yield of N-CDs reached as high as 71.6% in water. By using sodium diphosphate and phytic acid as masking agents, the fluorescent sensor can be quenched by Cd2+ and Hg2+ in the linear range of 0–26.8 μM and 0–49.9 μM within 5 min. Other common ions in farm products showed no significant effect on the fluorescence intensity of the sensing system. The results demonstrated that the sensing system had good selectivity and sensitivity for Cd2+ and Hg2+. The detection limits for Cd2+ and Hg2+ were 0.20 and 0.188 μM, respectively. In addition, the fluorescent sensor had been successfully applied for the detection of Cd2+ and Hg2+ in fruits and vegetables, and the recoveries were 86.44–109.40% and 86.62–115.32%, respectively. The proposed fluorescent sensor provides a rapid, simple, and sensitive detection method for Cd2+ and Hg2+ in food samples and thus a novel quantitative detection method for heavy metal ions in foods.

A review on magnetic sensors for monitoring of hazardous pollutants in water resources

Water resources have long been of interest to humans and have become a serious issue in all aspects of human life. The disposal of hazardous pollutants in water resources is one of the biggest global concerns and poses many risks to human health and aquatic life. Therefore, the control of hazardous pollutants in water resources plays an important role, when it comes to evaluating water quality. Due to low toxicity, good electrical conductivity, facile functionalization, and easy preparation, magnetic materials have become a good alternative in recent years to control hazardous pollutants in water resources. In the present study, the idea of using magnetic sensors in controlling and monitoring of pharmaceuticals, pesticides, heavy metals, and organic pollutants have been reviewed. The water pollutants in drinking water, groundwater, surface water, and seawater have been discussed. The toxicology of water hazardous pollutants has also been reviewed. Then, the magnetic materials were discussed as sensors for controlling and monitoring pollutants. Finally, future remarks and perspectives on magnetic nanosensors for controlling hazardous pollutants in water resources and environmental applications were explained.

Magnetic Fluorescent Quantum Dots Nanocomposites in Food Contaminants Analysis: Current Challenges and Opportunities

The presence of food contaminants can cause foodborne illnesses, posing a severe threat to human health. Therefore, a rapid, sensitive, and convenient method for monitoring food contaminants is eagerly needed. The complex matrix interferences of food samples and poor performance of existing sensing probes bring significant challenges to improving detection performances. Nanocomposites with multifunctional features provide a solution to these problems. The combination of the superior characteristics of magnetic nanoparticles (MNPs) and quantum dots (QDs) to fabricate magnetic fluorescent quantum dots (MNPs@QDs) nanocomposites are regarded as an ideal multifunctional probe for food contaminants analysis. The high-efficiency pretreatment and rapid fluorescence detection are concurrently integrated into one sensing platform using MNPs@QDs nanocomposites. In this review, the contemporary synthetic strategies to fabricate MNPs@QDs, including hetero-crystalline growth, template embedding, layer-by-layer assembly, microemulsion technique, and one-pot method, are described in detail, and their advantages and limitations are discussed. The recent advances of MNPs@QDs nanocomposites in detecting metal ions, foodborne pathogens, toxins, pesticides, antibiotics, and illegal additives are comprehensively introduced from the perspectives of modes and detection performances. The review ends with current challenges and opportunities in practical applications and prospects in food contaminants analysis, aiming to promote the enthusiasm for multifunctional sensing platform research.

The controllable synthesis of orange-red emissive Au nanoclusters and their use as a portable colorimetric fluorometric probe for dopamine

The fabrication of orange-red emissive M-AuNCs and their utility in the detection of dopamine assisted by a smartphone.

Carbon dot/inorganic nanomaterial composites

The preparation methods, formation mechanism, properties and applications of carbon dot/inorganic nanohybrid materials are reported.