Surface molecularly imprinted solid-phase extraction for the determination of vancomycin and norvancomycin in milk by liquid chromatography coupled to tandem mass spectrometry

Utilizing nitrogen, sulfur, phosphorus, and chlorine co-doped carbon dots as a fluorescent probe for determination of vancomycin in exhaled breath condensate

Vancomycin is employed to treat infections caused by gram-positive bacteria. Ensuring precise vancomycin dosages is essential to avoid the emergence of bacterial resistance. In the current study, a fluorescent nanoprobe was designed for vancomycin determination in exhaled breath condensate samples. The nanoprobe was based on carbon dots (CDs) doped with nitrogen, sulfur, phosphorus, and chlorine (NSPCl-doped CDs). Vancomycin significantly reduced the fluorescence of NSPCl-doped CDs and presented a quenching process in the analytical response of the probe within a concentration range of 0.01-2.0 μg mL-1 due to forming a non-fluorescent complex. The nanoprobe's intra-day and inter-day relative standard deviations were 1.4 % and 3.2 %, respectively. This nanoprobe was successfully used to determine vancomycin in the patients receiving this drug collected from the expiratory circuit of the mechanical ventilator.

Large-pore covalent organic framework as solid phase extraction absorbentforefficientdetermination of polypeptide antibiotics in animal-derived foods

The precise determination of polypeptide antibiotics (PPTs) in foods has been always challenging because of the interference of various endogenous peptides in complex matrix. Herin, a novel large-pore covalent organic framework (TABPT-SPDA-COF) with accessible pore size of 7.9 nm was synthesized as a solid phase extraction (SPE) absorbent for efficiently enriching four PPTs existed in foods originating from animals. The parameters of SPE process were systematically optimized. Subsequently, four PPTs were determined by UHPLC-MS/MS. Under the optimal conditions, TABPT-SPDA-COF shows outstanding enrichment capacity for PPTs in contrast to commercial absorbents ascribed to size selectivity and multiple interaction effects. The method exhibits excellent linear range (0.005-100 ng mL-1), satisfactory limits of detection (0.1 pg mL-1) as well as relative recoveries (86.2-116 %). This work offers a practicable platform to monitor trace PPTs from complex animal-derived foodstuffs.

Electrochemical and optical (bio)sensors for analysis of antibiotic residuals

Antibiotic residuals in foods may lead to crucial health and safety issues in the human body. Rapid and in-time analysis of antibiotics using simple and sensitive techniques is in high demand. Among the most commonly applicable modalities, chromatography-based techniques like HPLC and LC-MS, along with immunological approaches, particularly ELISA have been exampled in the analysis of antibiotics. Despite being highly sensitive, these methods are considerably time-consuming, thus the presence of skilled personnel and costly equipment is essential. Nanomaterial-based (bio)sensors, however, are de novo analytical equipment with some beneficial characteristics, such as simplicity, low price, on-site, high accuracy, and sensitivity for the detection of analytes. This review aimed to collect the latest developments in NM-based sensors and biosensors for the observation of highly used antibiotics like Vancomycin (Van), Linezolid (Lin), and Clindamycin (Clin). The current challenges and developmental perspectives are also debated in detail for future research directions.

Preparation of surface molecular imprinting fluorescent sensor based on magnetic porous silica for sensitive and selective determination of catechol

A magnetic fluorescent molecularly imprinted sensor was successfully prepared and implemented to determine catechol (CT). Fe3O4 nanoparticles were synthesized by the solvothermal technique and mesoporous Fe3O4@SiO2@mSiO2 imprinted carriers were prepared by coating nonporous and mesoporous SiO2 shells on the surface of the Fe3O4 subsequently. The magnetic surface molecularly imprinted fluorescent sensor was created after the magnetic mesoporous carriers were modified with γ-methacryloxyl propyl trimethoxy silane to introduce double bonds on the surface of the carries and the polymerization was carried out in the presence of CT and fluorescent monomers. The magnetic mesoporous carriers were modified with γ-methacryloxyl propyl trimethoxy silane and double bonds were introduced on the surface of the carriers. After CT binding with the molecularly imprinted polymers (MIPs), the fluorescent intensity of the molecularly imprinted polymers (Ex = 400 nm, Em = 523 nm) increased significantly. The fluorescent intensity ratio (F/F0) of the sensor demonstrated a favorable linear correlation with the concentration of CT between 5 and 50 μM with a detection limit of 0.025 μM. Furthermore, the sensor was successfully applied to determine CT in actual samples with recoveries of 96.4-105% and relative standard deviations were lower than 3.5%. The results indicated that the research of our present work provided an efficient approach for swiftly and accurately determining organic pollutant in water.

A review on recent advances in mass spectrometry analysis of harmful contaminants in food

Food safety is a widespread global concern with the emergence of foodborne diseases. Thus, establishing accurate and sensitive detection methods of harmful contaminants in different food matrices is essential to address and prevent the associated health risks. Among various analytical tools, mass spectrometry (MS) can quantify multiple impurities simultaneously due to high resolution and accuracy and can achieve non-target profiling of unknown pollutants in food. Therefore, MS has been widely used for determination of hazardous contaminants [e.g., mycotoxin, pesticide and veterinary drug residues, polychlorinated biphenyls (PCBs), dioxins, acrylamide, perfluorinated compounds (PFCs) and p-Phenylenediamine compounds (PPDs) in food samples]. This work summarizes MS applications in detecting harmful contaminants in food matrices, discusses advantages of MS for food safety study, and provides a perspective on future directions of MS development in food research. With the persistent occurrence of novel contaminants, MS will play a more and more critical role in food analysis.

Determination of organophosphorus in dairy products by graphitic carbon nitride combined molecularly imprinted microspheres with ultra performance liquid chromatography

•

An OPP-based molecularly imprinted microsphere was synthesized.

•

Composite material was synthesized by polymerizing the MIM on the surface of g-C₃N₄.

•

A novel SPE cartridge was prepared by using the composite material MIM/g-C₃N₄.

•

An SPE-UPLC method was developed for the detection of OPPs in dairy products.

Organophosphorus (OPPs) residues in dairy products are a potential threat to human health. To extract trace amounts of OPPs in dairy products, a graphitic carbon nitride (g-C₃N₄) was synthesized and combined with OPPs-based molecularly imprinted microspheres (MIM) to create a composite material (MIM/g-C₃N₄). Then, the MIM/g-C₃N₄ was used to prepare a solid phase extraction (SPE) cartridge to detect the OPPs in dairy products with UPLC method. The specific surface area of MIM/g-C₃N₄ was 172.208 m²/g, good thermal stability under 300℃, and could reuse up to 15 times. The four OPPs had good linear relationship within the range of 1–10000 ng/mL (r² > 0.999). The limits of detection were 0.7–2.6 ng/mL, and recoveries from blank dairy samples were 86.4 to 95.3 %. In this study, MIM combined with g-C₃N₄ was firstly utilized for the detection of OPPs in dairy products, which indicated it might be an ideal adsorbent for dairy products pretreatment.

Magnetic Molecularly Imprinted Polymers for the Rapid and Selective Extraction and Detection of Methotrexatein Serum by HPLC-UV Analysis

In this work, novel selective recognition materials, namely magnetic molecularly imprinted polymers (MMIPs), were prepared. The recognition materials were used as pretreatment materials for magnetic molecularly imprinted solid-phase extraction (MSPE) to achieve the efficient adsorption, selective recognition, and rapid magnetic separation of methotrexate (MTX) in the patients' plasma. This method was combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) to achieve accurate and rapid detection of the plasma MTX concentration, providing a new method for the clinical detection and monitoring of the MTX concentration. The MMIPs for the selective adsorption of MTX were prepared by the sol-gel method. The materials were characterized by transmission electron microscopy, Fourier transform-infrared spectrometry, X-ray diffractometry, and X-ray photoelectron spectrometry. The MTX adsorption properties of the MMIPs were evaluated using static, dynamic, and selective adsorption experiments. On this basis, the extraction conditions were optimized systematically. The adsorption capacity of MMIPs for MTX was 39.56 mgg^-1, the imprinting factor was 9.40, and the adsorption equilibrium time was 60 min. The optimal extraction conditions were as follows: the amount of MMIP was 100 mg, the loading time was 120 min, the leachate was 8:2 (v/v) water-methanol, the eluent was 4:1 (v/v) methanol-acetic acid, and the elution time was 60 min. MTX was linear in the range of 0.00005-0.25 mg mL^-1, and the detection limit was 12.51 ng mL^-1. The accuracy of the MSPE-HPLC-UV method for MTX detection was excellent, and the result was consistent with that of a drug concentration analyzer.

Surface molecularly imprinted solid-phase extraction for the determination of vancomycin in plasma samples using HPLC-MS/MS

Vancomycin is a glycopeptide antibiotic used to treat infections caused by Gram-positive bacteria. Due to the narrow therapeutic index of vancomycin, it is necessary to develop a sensitive and reliable analytical method to monitor the drug concentration in plasma. A novel method based on surface molecularly imprinted solid-phase extraction combined with liquid chromatography-tandem mass spectrometry for the determination of vancomycin in plasma sample was developed. The plasma sample was cleaned up through the solid-phase extraction process before the analysis. The calibration standard of vancomycin in plasma ranged between 1 and 100 ng/mL, and the correlation coefficient (r) was 0.9993. The average recoveries were from 94.3 to 104.0%, and the precision was less than 10.5%. The limit of detection and limit of quantification were 0.5 ng/mL and 1 ng/mL, respectively. The method validated was successfully used for the detection of vancomycin in mice after oral administration.

Magnetic Surface Molecularly Imprinted Polymer for Selective Adsorption of 4-Hydroxycoumarin

4-hydroxyl coumarin (HC), an important intermediate during the synthesis procedure of rodenticide and anti-cardiovascular drug, shows highly medicinal value and economic value. To achieve the efficient adsorption of HC from natural biological samples, a novel magnetic surface molecularly imprinted polymer (HC/SMIPs) was constructed by employing methacrylic acid (MAA) as functional monomer, organic silane modified magnetic particles as matrix carrier and HC as template molecule. Due to the numerous specific imprinted cavities on the HC/SMIPs, the maximum adsorption capacity of HC/SMIPs for 4-hydroxycoumarin could reach to 22.78 mg g⁻¹ within 20 min. In addition, HC/SMIPs exhibited highly selective adsorption for 4-hydroxycoumarin compared with other active drug molecules (osthole and rutin) and showed excellent regeneration performance. After 8 cycles of adsorption-desorption tests, the adsorption capacity of HC/SMIPs just slightly decreased by 6.64%. The efficient selective removal and easy recycle of 4-hydroxycoumarin from biological samples by HC/SMIPs made a highly promising to advance the application of imprinting polymers in complex practical environments.